Antena 742215 1p5p1x

742 215



65° Antenna

Kathrein’s X-polarized adjustable electrical downtilt antennas offer the wireless carrier the ability to tailor polarization diversity sites for optimum performance. Using variable downtilt, only a few models need be procured to accommodate the needs of widely varying conditions. Remotely controlled downtilt is available as a retrofitable option. • 0-10° downtilt range. • DC Grounded metallic parts for impulse suppression. • No moving electrical connections. • Wideband vector dipole technology. • Optional remote downtilt Control. • Will accomodate future 3G / UMTS applications.

General specifications: Frequency range Impedance VSWR Intermodulation (2x20w) Polarization Front-to-back ratio (180° ±30°) Maximum input power Electrical downtilt continuously adjustable Connector Isolation Cross polar ratio Main direction 0° Sector ±60° Weight Dimensions Equivalent flat plate area Wind survival rating* Shipping dimensions Shipping weight Mounting

1710–2200 MHz 50 ohms < 1.5:1 IM3: < -150 dBc +45° and -45° >30 dB (co-polar) >25 dB (total power) 300 watts per input (at 50°C) 0–10 degrees Horizontal pattern ±45°- polarization

2 x 7/16 DIN female >30 dB

25 dB (typical) >10 dB 16.5 lb (7.5 kg) 51.3 x 6.1 x 2.7 inches (1302 x 155 x 69 mm) 2.98 ft2 (0.277 m2) 120 mph (200 kph) 62 x 6.8 x 3.6 inches (1574 x 172 x 92 mm) 19.8 lb (9 kg) Fixed mount options are available for 2 to 5.7 inch (50 to 145 mm) OD mast. See reverse for order information.

Specifications: Gain +45° and -45° polarization horizontal beamwidth +45° and -45° polarization vertical beamwidth Vertical Pattern–sidelobe suppression for first side- lobe above main beam

Vertical pattern ±45°- polarization

1710–1880 MHz 17.7 dBi 67° (half-power)

1850–1990 MHz 17.9 dBi 66° (half-power)

1920–2200 MHz 18 dBi 65° (half-power)

6.8° (half-power)

6.5° (half-power)

6.2° (half-power)

0° 4° 8° 10° 18 17 17 17 dB

0° 4° 8° 10° 18 18 17 17 dB

0° 4° 8° 10° 18 18 17 18 dB

* Mechanical design is based on environmental conditions as stipulated in EIA-222-F (June 1996) and/or ETS 300 019-1-4 which include the static mechanical load imposed on an antenna by wind at maximum velocity. See the Engineering Section of the catalog for further details.

10822-C 936.2374/c Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Email: [email protected] Internet: www.kathrein-scala.com

Fax: (541) 779-3991



742 215



65° Antenna

2.625 inches ± 0.125 (68 mm ± 4)

2 x 131 1847 Mounting Kit 51.3 inches (1302 mm) Mounting Options: Model 2 x 131 1847 (shown) 732 327

Description Mounting Kit for 2 to 5.7 inch (50 to 145 mm) OD mast. Tilt Kit for use with the above mounting kit, 0–20 degrees downtilt angle.

53.4 inches (1356 mm) 54.6 inches (1386 mm)

2.7 inches (69 mm)

6.1 inches (155 mm)

1710–2200 1710–2200 -45° +45°

7/16 DIN

7/16 DIN

Order Information: Model 742 215

Description Antenna with 7/16 DIN connectors 0°–10° adjustable electrical downtilt

All specifications are subject to change without notice. The latest specifications are available at www.kathrein-scala.com. Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Email: [email protected] Internet: www.kathrein-scala.com

Fax: (541) 779-3991