742215 f5u1u

Multi-band F- Dual Polarization Half-power Beam Width Adjust. Electrical Downtilt

1710 –2200 X 65° 0°– 10°

set by hand or by optional RCU (Remote Control Unit) XPol F- 1710–2200 65° 18dBi 0°–10°T

742 215

Type No. Frequency range Polarization Gain

1710 – 1880 MHz

1710–2200 1850 – 1990 MHz

1920 – 2200 MHz

+45°, –45°

+45°, –45°

+45°, –45°

2 x 17.7 dBi

2 x 17.9 dBi

2 x 18 dBi

Half-power beam width Copolar +45°/ –45°

Horizontal: 67° Vertical: 6.8°

Horizontal: 66° Vertical: 6.5°

Horizontal: 65° Vertical: 6.2°

Electrical tilt continuously adjustable

0°– 10°

0°– 10°

0°– 10°

Vertical Pattern – sidelobe 0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T suppression for first sidelobe 18 ... 17 ... 17 ... 17 dB 18 ... 18 ... 17 ... 17 dB 18 ... 18 ... 17 ... 18 dB above main beam Front-to-back ratio (180° ± 30°) Cross polar ratio Maindirection Sector

0° ±60°

Isolation, between ports

Copolar: > 30 dB Total power: > 25 dB

Copolar: > 30 dB Total power: > 25 dB

Copolar: > 30 dB Total power: > 25 dB

Typically: 25 dB > 10 dB

Typically: 25 dB > 10 dB

Typically: 25 dB > 10 dB > 30 dB

> 30 dB

> 30 dB

Impedance

50 Ω

50 Ω

50 Ω

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3 (2 x 43 dBm carrier)

< –150 dBc

Max. power per input

300 W (at 50 °C ambient temperature)

1710 – 1880 MHz: +45°/ –45° Polarization 127°

67° 6.8°

dB

3

3

dB

10

10

0 0

Horizontal Pattern

Vertical Pattern 0°– 10° electrical downtilt

1850 – 1990 MHz: +45°/ –45° Polarization 125°

1710 – 2200 –45°

1710 – 2200 +45°

7-16

7-16

66° 6.5°

Input

dB

dB

3

0

Horizontal Pattern

Vertical Pattern 0°– 10° electrical downtilt

1920 – 2200 MHz: +45°/ –45° Polarization

Adjustment mechanism

Bottom 1x, Position bottom continuously adjustable

Weight Wind load

120°

2 x 7-16 female

Connector position

0

936.2374/c

65°

7.5 kg Frontal: Lateral: Rearside:

130 N (at 150 km/h) 110 N (at 150 km/h) 310 N (at 150 km/h)

6.2°

Max. wind velocity

3 0

Horizontal Pattern Internet: http://www.kathrein.de

3

dB

10

10

dB

Subject to alteration.

3

Mechanical specifications

10

10

200 km/h

Packing size

1574 x 172 x 92 mm

Height/width/depth

1302 / 155 / 69 mm

0

Vertical Pattern 0°– 10° electrical downtilt 742 215

Page 1 of 3

KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . . Phone +49 8031 184-0 . Fax +49 8031 184-494

F-s Harmony of Design and Technology Accessories (order separately) Description

734 360 734 361

Material

2 clamps

Mast: 34 – 60 mm dia.

Stainless steel

60 g

1

2 clamps

Mast: 60 – 80 mm dia.

Stainless steel

70 g

1

734 362

2 clamps

Mast: 80 – 100 mm dia.

Stainless steel

80 g

1

734 363

2 clamps

Mast: 100 – 120 mm dia.

Stainless steel

90 g

1

734 364

2 clamps

Mast: 120 – 140 mm dia.

Stainless steel

110 g

1

734 365

2 clamps

Mast: 45 – 125 mm dia.

Stainless steel

80 g

1

738 546

1 clamp

Mast: 50 – 115 mm dia.

Hot-dip galvanized steel

1.0 kg

2

850 10002 1 clamp

Mast: 110 – 220 mm dia.

Hot-dip galvanized steel

2.7 kg

2

850 10003 1 clamp

Mast: 210 – 380 mm dia.

Hot-dip galvanized steel

4.8 kg

2

732 317

Downtilt angle: 0° – 10°

Stainless steel

1.0 kg

1

1 downtilt kit

∅ 8.5

Weight Units per approx. antenna

Remarks

1302 1356 1386

Type No.

64 35

For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Material:

Reflector screen: Tin plated copper. Radiator: Tin plated zinc. Flat fiberglass radome: The max. radome depth is only 69 mm. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is grey. All screws and nuts: Stainless steel.

Grounding:

The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded.

Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: –55 °C – High temperature (dry): +60 °C

Environmental tests:

Kathrein antennas have ed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.

Adjustment mechanism with integrated scale 54

69

Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.

–45°

+45°

155 Bottom view

The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which includes the static mechanical load imposed on an antenna by wind at maximum velocity. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must be obeyed. Any previous datasheet issues have now become invalid.

Page 2 of 3

742 215

Internet: http://www.kathrein.de

KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . . Phone +49 8031 184-0 . Fax +49 8031 184-494

Subject to alteration.

As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions.

936.2374/c

Please note:

General Instructions for Adjustment Mechanism

Description of the adjustment mechanism (protective cap removed):

1

1

2 2

➀ Adjustment wheel with twist-lock function. ➁ Downtilt spindle with integrated scale.

➀ Thread for fixing the protective cap or the RCU (Remote Control Unit). ➁ Gearwheel for RCU power drive.

To set the downtilt angle exactly, you must look horizontally at the scale. The lower edge of the gearwheel must be used for alignment.

Manual adjustment procedure:

0° – max.°

max.° – 0°

Remove the protective cap.

Set downtilt angle by rotating the adjustment wheel.

Screw on the protective cap again.

936.2374/c

Subject to alteration.

Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment:

For a description of RCU installation please refer to the respective data sheet. Internet: http://www.kathrein.de

742 215

Page 3 of 3

KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . . Phone +49 8031 184-0 . Fax +49 8031 184-494