742215.pdf 6o493y

742 215



65° Antenna

Kathrein’s X-polarized adjustable electrical downtilt antennas offer the wireless carrier the ability to tailor polarization diversity sites for optimum performance. Using variable downtilt, only a few models need be procured to accommodate the needs of widely varying conditions. Remotely controlled downtilt is available as a retrofitable option. • 0-10° downtilt range. • DC Grounded metallic parts for impulse suppression. • No moving electrical connections. • Wideband vector dipole technology. • Optional remote downtilt Control. • Will accomodate future 3G / UMTS applications.

General specifications: Frequency range Impedance VSWR Intermodulation (2x20w) Polarization Front-to-back ratio (180° ±30°) Maximum input power Electrical downtilt continuously adjustable Connector Isolation Cross polar ratio Main direction 0° Sector ±60° Weight Dimensions Wind load Front/Side/Rear Wind survival rating* Shipping dimensions Shipping weight Mounting

Horizontal pattern ±45°- polarization

1710–2200 MHz 50 ohms < 1.5:1 IM3: < -150 dBc +45° and -45° >30 dB (co-polar) >25 dB (total power) 300 watts per input (at 50°C) 0–10 degrees 2 x 7-16 DIN female >30 dB

Vertical pattern ±45°- polarization

25 dB (typical) >10 dB 13.7 lb (6.2 kg) 51.7 x 6.1 x 2.8 inches (1314 x 155 x 70 mm) at 93 mph (150kph) 79 lbf (350 N) / 21 lbf (90 N) / 79 lbf (350 N) 120 mph (200 kph) 62.8 x 6.8 x 3.6 inches (1595 x 172 x 92 mm) 17 lb (7.7 kg) Fixed mount options are available for 2 to 4.6 inch (50 to 115 mm) OD mast. See reverse for order information.

Specifications: Gain +45° and -45° polarization horizontal beamwidth +45° and -45° polarization vertical beamwidth Vertical Pattern–sidelobe suppression for first side- lobe above main beam

1710–1880 MHz 17.7 dBi 68° (half-power)

1850–1990 MHz 17.9 dBi 66° (half-power)

1920–2200 MHz 18 dBi 64° (half-power)

7.1° (half-power)

6.8° (half-power)

6.4° (half-power)

0° 4° 8° 10° 18 18 17 17 dB

0° 4° 8° 10° 18 18 17 17 dB

0° 4° 8° 10° 18 18 17 17 dB

* Mechanical design is based on environmental conditions as stipulated in EIA-222-G (April 2007) and/or ETS 300 019-14 which include the static mechanical load imposed on an antenna by wind at maximum velocity. See the Engineering Section of the catalog for further details. 10822-G 936.3439/d Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Email: [email protected] Internet: www.kathrein-scala.com

Fax: (541) 779-3991



742 215



65° Antenna

2.5 inches (64 mm)

35 mm M6

51.7 inches (1314 mm)

64 mm M8

2 x 738 546 Mounting Kit

53.4 inches (1356 mm) 54.7 inches (1389 mm)

Mounting Options: Model 2 x 738 546 850 10013

Description Mounting Kit for 2 to 4.6 inch (50 to 115 mm) OD mast. Locking Tilt Mount Kit 0–13 degrees downtilt angle.

2.8 inches (71 mm)

6.1 inches (155 mm)

Order Information: Model 742 215

1710–2200 1710–2200 -45° +45°

Description Antenna with 7-16 DIN connectors 0°–10° adjustable electrical downtilt

7/16 DIN

7/16 DIN

All specifications are subject to change without notice. The latest specifications are available at www.kathrein-scala.com. Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Email: [email protected] Internet: www.kathrein-scala.com

Fax: (541) 779-3991