Bcst 10 Brief Manual 562s3

1

BCST-10 Barcode Scanner Overview

Performance Characteristics

The BCST-10 integrates a high-performance processor with an effective decoding board, combining a fast decoding speed, high precision and a high anti-interference ability in one device. The device can easily read barcodes on paper and other surfaces. In comparison with similar products, the BCST-10 excells with lightning fast scanning speed, a powerful reading ability and high accuracy.

Bluetooth class 2.1, Version +EDR

Light Source (Laser)

Laser LED 650+/-20nm

Decode Capability

Codabar, USPS, FedEx, Code 93, MSI, Code 128, UCC/ EAN-128, Code 39, EAN-8, EAN-13, UPC-A, UPC-E, ISBN,

Appearance:

Industrial 25, Interleaved 25, Standard 25, 2/5 Matrix

Function Setup:

Resolution

3mil

Nominal Working Distance

6~30cm

The BCST-10 Barcode Scanner changes all default settings by reading the setup barcodes.

Decode Rate

100 decodes per second

Scan width

30mm

Decode mode

Single-Line Aiming

Scan mode

Manual mode

Print Contrast Minimum

30%

Scan angles

Roll 30° Pitch 75° Yaw65°

Cylinder Horizontal Scan

Diameter 35mm

Indication

Beeper, LED

Radio Range

10m Visual range

Interfaces ed

SPP, HID, USB2.0

Processor

ARM7 72MHz

EEPROM

256K, can store thousands of barcodes

Wireless Communication

HID and SPP dual mode data transmission under Bluetooth

Scan the ‘Enter Setup’ barcode. You can always change your settings by scanning the specific setup barcode.

Power

Scan the ‘Exit with Save’ barcode to finish the setting.

USB Port

Bluetooth Wireless mode

2

Bluetooth

3

Pairing with Windows 7/8/10

4

Pairing with MAC OS

1. Read the ‘Enter Setup’ barcode, the indicator blinks Blue and green light

1. Read the ‘Enter Setup’ barcode, the indicator blinks Blue and green light

1. Read the ‘Enter Setup’ barcode, the indicator blinks Blue and green light

Enter Setup

Enter Setup

Enter Setup

2. Read the ‘Factory Reset’ barcode, the indicator blinks green light

2. Read the ‘Factory Reset’ barcode, the indicator blinks green light

Factory Reset

Factory Reset

3. Restart the BCST-10 barcode scanner 4. Open the Bluetooth on your computer, click ‘Add a device...’ 5. Click ‘Next’ to search for nearby devices 6. The computer will automatically search for nearby Bluetooth devices. After a few seconds ‘CT********’ will appear in the available devices list 7. Double click ‘CT********’ or click ‘Next’, select ‘Enter the device’s pairing code’, put in the pairing code 10010, click ‘next’ 8. There will be a prompt at the lower right corner of your desktop indicating the adding of a new device. After 5 seconds you will hear a beep from the BCST-10 and the blue light flashes every three seconds, indicating a successful pairing.

1800mAh lithium battery

Note: 1. If you want to enter the setup of the BCST-10, please scan the ‘Enter Setup’ barcode, then the ‘Function Setup’ barcode, followed by the ‘Exist with Save’ barcode. 2. If the device has been paired with a Bluetooth device and needs to be paired with another Bluetooth device, please restore factory settings and then re-pair.

USB Wired mode

Pairing with Windows XP

class 2.1 protocol Battery

3. Read the ‘Exit with save’ barcode

Exit with Save

4. Turn on your Bluetooth within the Win7/8/10 OS, enter the ‘Control ’ - ‘Devices and Printers’ - ‘Add a device’ - select ‘CT********’ to add the device to your computer 5. Double click the device name and enter the code: 10010 6. Click ‘Next’, the BCST-10 will beep to indicate a successful pairing

2. Read the ‘Factory Reset’ barcode, the indicator blinks green light

Factory Reset

3. Read the ‘Enter Setup’ barcode

Enter Setup

4. Read the ‘One-click Mac OS Connection’ barcode

One-click Mac OS Connection

5. Read the ‘Exit with Save’ barcode

Exit with Save

6. Restart the BCST-10 barcode Scanner 7. Open the Bluetooth in your operating system, click ‘Bluetooth Setup Assistant’ to search for new devices 8. The computer will automatically search for nearby Bluetooth devices. After a few seconds ‘CT********’ will appear in the available devices list 9. Double click ‘CT********’ or click ‘continue’, a bluetooth pairing request will pop up. (Note: The PIN code contains too many digits by default, which could result in a failed pairing. Please click ‘code Option’ and select ‘Use a specific code’ and put in a new PIN code with fewer digits.) 10. Find the above mentioned numbers in the following barcodes, scan them contiously and then select the ‘Exit without Saving’ barcode to finish the pairing

6. Restart the BCST-10 barcode scanner 7. Turn on the Bluetooth on your iOS device, search for the BCST-10 barcode scanner 8. Click BCST-10 in the available devices list, a Bluetooth pairing request will pop up with a PIN code 9. Find the left mentioned numbers in the following barcodes, scan them contiously and then select the ‘Exit without Saving’ barcode to finish the pairing

7

Offline Mode

If you are heading for a working area which lies outside the Bluetooth signal range, you may activate the offline mode of the scanner, following the steps described below. Under this enhanced offline mode, all scanned data will be stored directly into the buffer memory of the device. Furthermore, the data entries will be permanently saved in the buffer memory prior to the manual into the working station, so that you may them time and again to your liking. Due to the fact that the data entries will be automatically wiped from the buffer memory during , a data loss is possible when malfunctions occur during , e.g. if the working station suffers an unanticipated system shut down. An operation in offline mode is strongly recommended under the following scenarios:

Keyboard Language Setting

Scan the ‘Enter setup’ Barcode - ‘Select your keyboard language’ Exit With save - Change your PC language as selected.

Read ‘Enter setup’ Barcode

Italian Keyboard

US Keyboard

1) During the scanning process, the device often leaves the Bluetooth signal range; 2) Due to a high quantity of blocking objects, the Bluetooth signal’s stability can’t be ensured.

Exit Without Saving

5

8

German Keyboard

1. By scanning the following barcode, the offline mode will be activated.

Pairing with IOS devices

French Keyboard

1. Read the ‘Enter Setup’ barcode, the indicator blinks Blue and green light

Enter Setup

2. Read the ‘Factory Reset’ barcode, the indicator blinks green light

Offline mode activation Exit Without Saving

6

2. By scanning the following barcode, all data in the buffer memory will be deleted (only in offline mode).

Buffer data purge

1. Read the ‘Enter Setup’ barcode, the indicator blinks Blue and green light Factory Reset

3. Read the ‘Enter Setup’ barcode

Spainish Keyboard

Pairing with Android devices 3. By scanning the following barcode, all data entries in the buffer memory can be manually ed after reconnecting to the working station (only in offline mode).

Exit With save

Eg: Switching to German keyboard

Enter Setup

2. Read the ‘Factory Reset’ barcode, the indicator blinks green light Manual data

Enter Setup

4. Read the ‘One-click Mac OS Connection’ barcode

Factory Reset

4. By scanning the following barcode, the gross quantity of the ed data entries will be summarised (only in offline mode).

Read ‘Enter setup’ Barcode

3. Read the ‘Exit with Save’ barcode One-click IOS Connection

5. Read ‘Exit with Save’ barcode

Exit with Save

Summarising of ed data entry quantity Exit with Save

4. Turn on the Bluetooth on your Android device and search for ‘CT********’ 5. Input the pairing code 10010 in the pairing request dialog 6. Click the ‘OK’ button, you will hear a beep upon successful pairing

German Keyboard

5. By scanning the following barcode, the device leaves the offline mode, normal mode will be reinitialised. Exit With save

Quit offline mode

9

Prefix and Suffix Setting

10

Function Setup Barcodes

(Note: the barcode with * is default setting of BCST-10)

11

Common Function Barcodes

1. Scan the ‘Enter Setup’ barcode (*) Enable Code bar

Disable Code bar

Do not Apply Enter for suffix

Apply Tab for suffix

Exit without Save

Exit Auto Power Off

Disable Auto

(*) Apply Enter for suffix

Enable Auto-induction Mode

Bluetooth Input Method

Factory Reset

Enter setup

2. Scan the ‘Prefix Setting’ or ‘Suffix Setting’ scanner

Enable Industral 25

(*) Disable Industrial 25

(*) Enable Interleaved 25

Disable Interleaved 25

Enable Matrix 25

(*) Disable Matrix 25

Enble SPP

SPP Batch

(*) Enable Standard 25

Disable Standard 25

Enter Setup

Exit with Save

(*) Enable Code 39

Disable Code 39

Warning:

Prefix Setting

Suffix Setting

3. Scan certain barcodes sequentially to generate your own prefix/suffix. Example: If you want to add ‘#’ as prefix or suffix, according to the barcode list provided on our website, you need to scan the ‘3’ barcode first and then scan the ‘5’ barcode. (Please refer to www.inateck.com for the number and symbol barcode list.)

(*) Enable Code 93

Disable Code 93

(*) Enable Code 128

Disable Code 128

(*) Enable EAN-8

Disable EAN-8

(*) Enable EAN-13

Disable EAN-13

4. Scan the “Exit with Save” barcode.

1. Please remove the power and USB cable during thunderstorms to avoid electrical damage to circuits caused by lightning. 2. Keep the device away from heat sources and avoid extreme temperatures 3. Keep the device away from humid and wet places during storage and transportation

LED lndicators Indicator Colour

Meaning

Green LED on and off quickly

Good Read, with one short beep (high tone)

Red LED keep on

Charging, red LED will off when the battery full charged

Green LED Flashing (On/Off ratio 1:1)

Power on, Bluetooth unpaired

Blue LED Flashing (On/Off ratio 1:1)

Bluetooth paired, waiting for connection

Blue LED Flashing (On/Off ratio 20ms:3s)

Bluetooth paired, connected

The blue and green LED Flashing (On/Off ratio 1:1)

Indicates the Scanner is in setting mode

Beeper Beeping

Meaning

One long beep, high tone

Power on.

One short beep, high tone

Read barcode, with green LED on (1s) and off quickly

One long beep, low tone

Configuration error, with blue and green LED flashing; Or transmit buffer full, with green LED on and off quickly

Exit With save

(*) Enable UPC-E

Enable MSI

Disable UPC-E

(*) Disable MSI

Two short beeps, high tone

Power off

Two short beeps, low-high tone

BT connection established, with blue LED flashing (On/Off ratio 20ms:3s).

Two short beeps, low-high tone

BT connection out of range or suspended, with blue LED flashing (On/Off ratio 1:1)

Three short beeps, tone descending from high to low

Enter or Exit Setting mode, with blue and green LED flashing

Three short beeps, tone ascending from low to high

Configuration correct, with blue and green LED flashing

D. Why does Computer or smartphone fail to find the Bluetooth scanner? 1. Make sure the scanner is turned on. 2. Don’t pair devices until indicator blinks green light. 3. Please try ‘Reconnect the scanner’. E. Why can’t I Barcodes to my computer or smartphone which has been automatically paired? 1. Make sure devices are paired and indicator turns to blue light. 2. Check out if ‘Offline Mode’ switches on. Under this mode, barcodes won’t automatically, please scan barcode ‘Manual data ’ to retry. F. Why does the scanner fail to connect to Android smartphones? 1. Make sure the smartphone runs Android 4.0 and above 2. If the device runs Android 2.2 or 2.3 the smartphone needs to by connected by the Bluetooth input method. Please the customer service for technical .

Information

USA

Tel.: +1 513-644-9712

Phone hours: Weekdays 9 AM to 5 PM (EST)

Email: [email protected]

Web: www.inateck.com

Addr.: F&M Technology LLC, 9852 Crescent Park Drive,

West Chester, OH 45069 USA

Fax.: +49 342-07673082

N. How to solve the messy code problem encountered while using other foreign languages? The default language is English. Please refer to ‘Language Setting’ chapter to change the setting.



M. When connecting to computers via Bluetooth and inputting paring code, why does a PIN code display, such as 19179411? 1. Hold and press the power button for 3 seconds to restart the scanner. 2. Set up the scanner by scanning barcodes ‘Enter Setup’ and then ‘Factory Reset’ until indicator blinks green light. 3. Follow the steps on instruction manual, reconnect devices according to different systems.

Tel.: +49 342-07673081

L. Why is the response speed a little slower after reconnecting the scanner? 1. Hold and press the power button for 3 seconds to restart the scanner. 2. Please try ‘Reconnect the scanner’.

Phone hours: Weekdays 9 AM-5 PM (CET)

K. Why is the smartphone paired but disconnected to scanner? It happens in following scenarios: 1. Connected by Bluetooth input method. Please refers to Bluetooth input method operating instruction and follow the method strictly. 2. Using SPP mode. Install Bluetooth Serial Port APP in smartphones and connect through it.

Email: [email protected]

J. Are there any barcodes to apply or remove Enter for suffix? Yes, please follow page ‘Common Function Barcodes’ on the instruction manual or customer service for .

Web: http://www.inateck.com/de/

I. Why can’t the scanner connect automatically after restarting the computer? 1. Make sure the scanner is turned on. 2. Use ‘USB wired mode’ or try ‘Reconnect the scanner’.

Addr.: F&M TECHNOLOGY GmbH, Montgolfierstraße 6,

H. Can the scanner connect to smartphone or tablet after connecting to computers? A scanner can only connect to one device at a time. If you want to change device, please try ‘Reconnect the scanner’.

04509 Wiedemar

G. Some barcodes cannot be read, why? 1. Dirty or unclear barcodes might not be read. 2. Digital barcodes displayed on phones, computers or tablets cannot be read. 3. Some uncommon barcode types are not commonly used and thus not activated by default. You need to activate a specific barcode type first. Please feel free to our customer service for further assistance.

► USB wired + Bluetooth wireless communication ► Built-in FLASH memory, s breakpoint resume ► Can store 2600 pieces EAN-13 codes under offline state ► s Windows XP, Win7/8/10, Wince, mobile OS PC and android, iOS devices

C. Why does ‘Device cannot start’ display after inserting Bluetooth adapter to computer? 1. Check if the Bluetooth adapter is working and Bluetooth indicator lights up. 2. Make sure the Bluetooth device of your computer is turned off. 3. Please use another USB port or computer to retry.

BCST-10 Barcode Scanner Quick Start Guide

B. Why can’t I the data saved in the scanner via Bluetooth? 1. Connect USB cable to computer to see if data will be ed automatically. 2. If not, please scan ‘Manual data ’ barcode to .

Packing list:

A. Reconnect the scanner (How to reconnect the scanner to computers or smartphones you have successfully paired with before?) Warning: Reconnecting the scanner will empty its stored data. 1. Select and remove the paired scanner in PC Bluetooth devices list, or cancel paired scanner in smartphone Bluetooth devices list. 2. Set up the scanner by scanning barcodes ‘Enter Setup’ and then ‘Factory Reset’ until indicator blinks green light. 3. Follow the instruction manual, reconnect devices according to different systems.

BCST-10*1unit USB cable*1pcs Quick Start Guide

FAQ

Note: The device is not equipped with a charger, please charge the device via USB output charging cable.

12