Stag Beetle 5a97
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 445h4w
Overview 1s532p
& View Stag Beetle as PDF for free.
More details 6h715l
- Words: 1,030
- Pages: 18
Lucanus Swinhoei Model & diagram © Pavel Nikulshin Paper : Monocolor Side of square : 70 cm Density of paper : 60 g/m 2 Email [email protected]
1 .
3 .
2 .
4 .
NPV
Made in Russia
5 .
6 .
7 .
9 .
1 1 .
8 .
1 0 .
1 2 .
1 3 .
1 5 .
1 4 .
1 6 . Unfold to step 11.
1 7 . 1 8 .
1 9 .
2 0 .
2 1 . Fold on lines.
2 2 .
2 4 . 2 3 .
Reverse-fold two corners.
Reverse-fold two corners.
2 6 .
2 5 .
2 7 .
2 8 . Fold and unfold own layer.
Reverse-fold two corners.
2 9 . 3 0 .
Fold and unfold own layer. Open -sink.
3 1 .
3 2 .
View from above.
Repeat steps 30-33 from the front and behind.
30-33
3 3 . 3 4 .
Fold the edge in to the center, spread-sining top and bottom. Fold the edge back out to the side.
Sink the long edge, closed at top and bottom.
3 5 . 3 6 . Fold the edge in to the center, spread-sining top and bottom.
Fold the edge back out to the side.
3 7 . Sink the edge, closed at top and bottom.
3 8 . 3 9 .
4 0 .
Repeart step 35-40 to behind.
Fold own layer on the right.
Fold own layer on the left.
4 2 .
4 1 .
4 3 .
Fold own flap up.
Sink the long edge, closed at top and bottom. Fold and unfold one layer.
4 4 .
4 6 . 4 5 .
Sink the edge, closed at top and bottom.
4 7 .
Fold the flap down. To raise the top layer.
4 8 .
4 9 .
Sink the edge, closed at top and bottom.
Fold own flap up.
Repeat steps 35-51.
35-51
5 0 .
5 1 .
5 2 .
Fold down the small corner. Sink the corner.
5 3 . 5 4 .
5 5 .
Fold own layer on the right. Repeat steps 35-40 from two sides. Fold own layer on the left.
5 6 .
5 7 . 5 8 .
Fold own flap up. Repeat steps similar 35-40. Fold own flap up.
5 9 . 6 0 .
6 1 .
Repeat steps 45-47. Fold two flap down.
Repeat steps 59-63.
45-47
59-63
6 2 .
6 3 . 6 4 . Fold one flap down. Fold and unfold one layer.
6 5 . 6 6 . 6 7 .
Pressed from each side to shift up the top layer. Closed sink fold.
6 8 .
6 9 .
Fold own flap up.
7 0 .
Fold one flap up on each side, and fold two flaps down behind.
7 1 .
7 3 . 7 2 .
Fold and unfold one layer. Pressed from each side to shift down the top layer.
7 4 . 7 5 .
7 6 .
Open sink corner.
7 8 .
7 7 . Pleat fold. Position of lines to determined by sight.
8 0 .
7 8 .
8 2 . 8 1 .
Open the top layer.
Pleat fold. Position of lines to determined by sight.
8 5 . 8 3 . 8 4 .
Fold and unfold own layer.
Closed sink fold. Closed sink fold.
8 7 .
8 8 .
8 9 . Repeat steps 87-91.
Open.
87-91
9 1 .
9 0 .
9 2 . 9 3 .
9 4 . 9 5 .
9 6 .
Crimp the six leg.
9 7 .
9 8 .
Crimp the leg.
9 9 . Closed sink fold.
1 0 0 .
1 0 1 . 1 0 2 .
Repeat steps 101-102 behind. Reverse-fold the corner.
101-102
1 0 3 .
1 0 4 .
Reverse-fold the corner.
1 0 5 .
Reverse-fold the remaining bit. Narrow the foot and give it a half-twist.
Crimp the leg.
1 0 6 . 1 0 7 .
1 0 8 .
Repeat steps 103-107.
Repeat steps 103-107 in front. 100-107 Repeat steps 100-110.
103-107 100-110
1 0 9 .
1 1 0 . 1 1 1 . To form thorn.
Open on the middle.
Unsink.
1 1 2 .
1 1 5 .
1 1 3 . 1 1 4 .
Repeat steps 113-115. Open on the middle.
1 1 8 . 113-115 Unsink.
1 1 6 . 1 1 7 .
1 1 9 .
Unsink. To pull from marked points.
1 1 9 . 1 2 0 . To form thorns.
1 2 2 .
1 2 1 .
Repeat steps 118-123.
1 2 3 . 118-123
Open on the middle. To pull from marked points.
1 2 4 .
1 2 5 .
Unsink
1 2 6 . 1 2 7 . To form thorns.
1 2 8 . Repeat steps 126-131.
1 2 9 . 1 3 1 .
1 3 0 .
126-131
1 3 2 .
The top layer is not shown. Reverse-fold the corner.
Reverse-fold the corner.
Reverse-fold.
1 3 4 .
1 3 5 .
1 3 6 .
1 3 3 . Reverse-fold the remaining bit.
1 3 8 .
1 3 7 .
1 3 9 .
1 4 0 .
To pull from marked points.
Repeat steps 134-145. 134-145
1 4 1 . Shift the layer from behind.
1 4 4 .
1 4 2 .
1 4 3 .
To form the horn.
1 4 5 .
1 4 6 .
1 4 7 .
Fold own flap up. Make some small pleat folds. Mountain fold.
1 4 8 . 1 4 9 .
Fold own flap doun.
1 5 0 .
1 5 3 .
1 5 4 .
1 5 1 . Make two small pleat folds.
1 5 2 .
1 5 7 . 1 5 5 .
1 5 6 .
To give model the finished form.
Finished.
1 5 8 .
1 5 9 .
1 6 0 .
1 .
3 .
2 .
4 .
NPV
Made in Russia
5 .
6 .
7 .
9 .
1 1 .
8 .
1 0 .
1 2 .
1 3 .
1 5 .
1 4 .
1 6 . Unfold to step 11.
1 7 . 1 8 .
1 9 .
2 0 .
2 1 . Fold on lines.
2 2 .
2 4 . 2 3 .
Reverse-fold two corners.
Reverse-fold two corners.
2 6 .
2 5 .
2 7 .
2 8 . Fold and unfold own layer.
Reverse-fold two corners.
2 9 . 3 0 .
Fold and unfold own layer. Open -sink.
3 1 .
3 2 .
View from above.
Repeat steps 30-33 from the front and behind.
30-33
3 3 . 3 4 .
Fold the edge in to the center, spread-sining top and bottom. Fold the edge back out to the side.
Sink the long edge, closed at top and bottom.
3 5 . 3 6 . Fold the edge in to the center, spread-sining top and bottom.
Fold the edge back out to the side.
3 7 . Sink the edge, closed at top and bottom.
3 8 . 3 9 .
4 0 .
Repeart step 35-40 to behind.
Fold own layer on the right.
Fold own layer on the left.
4 2 .
4 1 .
4 3 .
Fold own flap up.
Sink the long edge, closed at top and bottom. Fold and unfold one layer.
4 4 .
4 6 . 4 5 .
Sink the edge, closed at top and bottom.
4 7 .
Fold the flap down. To raise the top layer.
4 8 .
4 9 .
Sink the edge, closed at top and bottom.
Fold own flap up.
Repeat steps 35-51.
35-51
5 0 .
5 1 .
5 2 .
Fold down the small corner. Sink the corner.
5 3 . 5 4 .
5 5 .
Fold own layer on the right. Repeat steps 35-40 from two sides. Fold own layer on the left.
5 6 .
5 7 . 5 8 .
Fold own flap up. Repeat steps similar 35-40. Fold own flap up.
5 9 . 6 0 .
6 1 .
Repeat steps 45-47. Fold two flap down.
Repeat steps 59-63.
45-47
59-63
6 2 .
6 3 . 6 4 . Fold one flap down. Fold and unfold one layer.
6 5 . 6 6 . 6 7 .
Pressed from each side to shift up the top layer. Closed sink fold.
6 8 .
6 9 .
Fold own flap up.
7 0 .
Fold one flap up on each side, and fold two flaps down behind.
7 1 .
7 3 . 7 2 .
Fold and unfold one layer. Pressed from each side to shift down the top layer.
7 4 . 7 5 .
7 6 .
Open sink corner.
7 8 .
7 7 . Pleat fold. Position of lines to determined by sight.
8 0 .
7 8 .
8 2 . 8 1 .
Open the top layer.
Pleat fold. Position of lines to determined by sight.
8 5 . 8 3 . 8 4 .
Fold and unfold own layer.
Closed sink fold. Closed sink fold.
8 7 .
8 8 .
8 9 . Repeat steps 87-91.
Open.
87-91
9 1 .
9 0 .
9 2 . 9 3 .
9 4 . 9 5 .
9 6 .
Crimp the six leg.
9 7 .
9 8 .
Crimp the leg.
9 9 . Closed sink fold.
1 0 0 .
1 0 1 . 1 0 2 .
Repeat steps 101-102 behind. Reverse-fold the corner.
101-102
1 0 3 .
1 0 4 .
Reverse-fold the corner.
1 0 5 .
Reverse-fold the remaining bit. Narrow the foot and give it a half-twist.
Crimp the leg.
1 0 6 . 1 0 7 .
1 0 8 .
Repeat steps 103-107.
Repeat steps 103-107 in front. 100-107 Repeat steps 100-110.
103-107 100-110
1 0 9 .
1 1 0 . 1 1 1 . To form thorn.
Open on the middle.
Unsink.
1 1 2 .
1 1 5 .
1 1 3 . 1 1 4 .
Repeat steps 113-115. Open on the middle.
1 1 8 . 113-115 Unsink.
1 1 6 . 1 1 7 .
1 1 9 .
Unsink. To pull from marked points.
1 1 9 . 1 2 0 . To form thorns.
1 2 2 .
1 2 1 .
Repeat steps 118-123.
1 2 3 . 118-123
Open on the middle. To pull from marked points.
1 2 4 .
1 2 5 .
Unsink
1 2 6 . 1 2 7 . To form thorns.
1 2 8 . Repeat steps 126-131.
1 2 9 . 1 3 1 .
1 3 0 .
126-131
1 3 2 .
The top layer is not shown. Reverse-fold the corner.
Reverse-fold the corner.
Reverse-fold.
1 3 4 .
1 3 5 .
1 3 6 .
1 3 3 . Reverse-fold the remaining bit.
1 3 8 .
1 3 7 .
1 3 9 .
1 4 0 .
To pull from marked points.
Repeat steps 134-145. 134-145
1 4 1 . Shift the layer from behind.
1 4 4 .
1 4 2 .
1 4 3 .
To form the horn.
1 4 5 .
1 4 6 .
1 4 7 .
Fold own flap up. Make some small pleat folds. Mountain fold.
1 4 8 . 1 4 9 .
Fold own flap doun.
1 5 0 .
1 5 3 .
1 5 4 .
1 5 1 . Make two small pleat folds.
1 5 2 .
1 5 7 . 1 5 5 .
1 5 6 .
To give model the finished form.
Finished.
1 5 8 .
1 5 9 .
1 6 0 .
Related Documents 2w1qw
Stag Beetle 5a97
June 2020 7
Flying Stag Beetle 1lia
December 2019 53
Eng-stag-200 Stag-4 Stag-300 Plus Stag-300 Manual 3k1d2s
November 2019 51
Stag Permission m2l1q
February 2022 0
New Beetle 676a5m
November 2019 38