This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 445h4w
Overview 1s532p
& View Operation Instruction - Iq8 Control C & M as PDF for free.
More details 6h715l
- Words: 8,386
- Pages: 48
Operation Instruction Fire Alarm Control IQ8Control C/M
798950.GB0 06.2005
G 299044
GB
Technical changes reserved!
2
Fire Alarm Control IQ8Control
Intended purpose This software must only be used for the applications outlined in the catalogue and the technical description and in combination with external components and systems, which have been approved or recommended by Esser by Honeywell.
Warning In order to ensure correct and safe operation of the product, all guidelines concerning its transport, storage, installation, and mounting must be observed. This includes the necessary care in operating the product.
Safety-relevant information This manual includes all information required for the proper use of the products described. The term 'qualified personnel' in the context of the safety information included in this manual or on the product itself designates: •
project engineers who are familiar with the safety guidelines concerning fire alarm and extinguishing systems.
•
trained service engineers who are familiar with the components of fire alarm and extinguishing systems and the information on their operation as included in this manual.
•
trained installation or service personnel with the necessary qualification for carrying out repairs on fire alarm and extinguishing systems or who are authorised to operate, ground and label electrical circuits and/or safety equipment/systems.
Safety warnings The following information is given in the interest of your personal safety and to prevent damage to the product described in this manual and all equipment connected to it. Safety information and warnings for the prevention of dangers putting at risk the life and health of and maintenance personnel as well as causing damage to the equipment itself are marked by the following pictograms. Within the context of this manual, these pictograms have the following meanings:
Warning sign Designates risks for man and/or machine. Non-compliance will create risks to man and/or machine. The level of risk is indicated by the word of warning:
Important information on a topic or a procedure and other important information!
This is an important guideline issued by VdS Schadenverhütung GmbH, Cologne. If the hazard alarm system is programmed in compliance with VdS, this section must be read very carefully and all instructions must be adhered to. Dismantling In accordance with Directive 2002/96/EG (WEEE), after being dismantled, electrical and electronic equipment is taken back by the manufacturer for proper disposal.
Fire Alarm Control IQ8Control
1
General ....................................................................................................................................................................... 4
2
General View.............................................................................................................................................................. 5 2.1
Key switch / enabling operation.......................................................................................................................... 6
2.2
Function of the display and operating elements................................................................................................ 7
3
Operating status of the fire alarm control ..................................................................................................... 16 3.1
Normal condition................................................................................................................................................ 16
3.2
Fire ...................................................................................................................................................................... 16
3.3
Trouble................................................................................................................................................................ 17
3.4
U failure ......................................................................................................................................................... 17
3.5
Disconnection..................................................................................................................................................... 18
3.6
Testmode ........................................................................................................................................................... 18
4
Operation .................................................................................................................................................................. 19 4.1
Function keys / selection menu ........................................................................................................................ 19 4.1.1 4.1.2 4.1.3
4.2
Entering time/date.............................................................................................................................................. 25
4.3
Detector zones................................................................................................................................................... 26 4.3.1 4.3.2 4.3.3
4.4
4.5
Switching on / resetting a detector zone ..................................................................................26 Disconnect a detector zone ......................................................................................................27 Status of a detector zone..........................................................................................................28
Detectors ............................................................................................................................................................ 29 4.4.1 4.4.2 4.4.3
Switching on / resetting a detector ...........................................................................................29 Disconnect a detector ...............................................................................................................30 Status of a detector...................................................................................................................31
Controls .............................................................................................................................................................. 32 4.5.1 4.5.2 4.5.3
Switching on a control...............................................................................................................32 Disconnect a control .................................................................................................................33 Status of a control.....................................................................................................................34
4.6
Common display of the status messages........................................................................................................ 35
4.7
Delay and ................................................................................................................................................. 36 4.7.1 4.7.2
5
Display / display control ............................................................................................................21 Display priority of the messages in the display ........................................................................23 Info text / additional text and parameter display.......................................................................24
Delay.........................................................................................................................................37 .........................................................................................................................................37
4.8
Alarm counter..................................................................................................................................................... 38
4.9
Lamp test............................................................................................................................................................ 39 Service Level ............................................................................................................................................................ 40 5.1.1 5.1.2 5.1.3
Primary loop functions ..............................................................................................................41 Sensor functions (loop).............................................................................................................43 Sensor functions (zone/detector)..............................................................................................45
3
4
Fire Alarm Control IQ8Control
1 General Thank you for buying a product from Esser by Honeywell. The quality and reliability of Esser products are well known and ensure the highest level of safety at their installation location for many, many years. This manual in combination with the instructions provided by your installer will quickly provide you with extensive information about the operation of the IQ8Control C/M fire alarm control . We recommend that you read this manual thoroughly and keep it together with the technical documentation of the fire alarm control . If you have any questions, please your installer.
To equip buildings, facilities, commonly frequented areas and working spaces with a fire warning system can only be carried out economically and with reasonable propriety when correspondingly well-founded safety concepts are developed and accordingly applied. Wherever the highest requirements are made on a fire warning system, whether in small commercial facilities or in industrial plants, the Fire Alarm Control IQ8Control transforms safety techniques and economy into practical reality. The modular design with different micro modules and individual extension concepts allow the FA IQ8Control to be easily adapted to special requirements. The FA IQ8Control represents the most modern standard of fire warning technology. A reliable fire warning facility is guaranteed by the application of "intelligent" fire detectors connected in an analog loop, which is tolerant to short and open circuits. In this analog loop - the esserbus® / esserbus® PLus - up to 127 loop devices each capable of being configured into 127 individual detector zones can be connected with an overall cable length of up to two kilometres. The esserbus® is a two-wire line supplied and monitored at both ends in ring topology. The Fire Alarm Control IQ8Control automatically s the wiring of the analog loop and determines the logical addresses of the individual loop devices. A separate adjustment of the addresses of the individual loop devices is unnecessary. Fire alarm s with esserbus® PLus analog loop provide the direct connection of addressable notification appliances, e.g. sounder to the loop. There is no need of an auxiliary power for these loop devices. Subscribers in the esserbus® are automatic intelligent fire detectors, manual call points and technical alarm modules (TAL) and the specially developed esserbus® transponder input/output devices. These esserbus® transponders are loop devices with freely programmable inputs and outputs, for example for the activation and monitoring of external devices such as display s, alarm devices, door closers and other connected equipment. Using the essernet® safety network, 31 Fire Alarm Control IQ8Control or other network subscribers such as display and operating s or alarm devices can be connected in a homogenous network. Operation of the fire warning system, e.g. switching off a detector zone, is possible from any fire alarm control or operating in the essernet®. Signals such as alarm, trouble, disconnection or other events are transferred to all subscribers in the essernet® and can be accessed from any desired position. Data exchange can, according to the transfer rate, be carried out either with a twisted pair or a LAN cable. The essernet® communications protocol guarantees reliable data exchange even if a short or open circuit occurs in the network.
LED is permanently on
LED blinks
Fire Alarm Control IQ8Control
5
2 General View 1
2
3
4
5
6 7
8
10
9
Fig. 1: General view of the display and operating elements
c
Single zone indicator unit (GEA)
d
Common display FIRE
e
Common display PRE-ALARM
f
Common display TROUBLE
g
Common display disconnection
h
Alphanumeric display
i
Key switch
j
Operating elements
k
Function keys and keyboard
l
Opening for Programming via Serice PC Connector must locked with dummy plug for ESD protection
6
Fire Alarm Control IQ8Control
2.1
Key switch / enabling operation
The key switch can be used to lock the operating keyboard of the fire alarm control IQ8Control to prevent unauthorised operation. In normal operating mode, the keyboard should be locked.
Key switch in horizontal position
locked unlocked
Fig. 2: Keyboard unlocked
•
The keyboard is unlocked for the operation of the single IQ8Control and other processors interconnected through the essernet®.
•
The display menu is activated.
•
The common disconnection display may be lit. Depending on the customer data programming, when the keyboard was unlocked, at least one zone, one output or one component of the fire alarm control , such as the master box, was switched off.
In case of a fire alarm, FA will disable the activation of the master box (MB). The fire brigade will not be alarmed, automatically. In case of an event, the red LED Notify fire department will be lit.
Key switch in vertical position
locked unlocked
Fig. 3: Keyboard blocked
•
The keyboard is blocked. The key can be removed.
•
The keys “Additional Messages” and “ / Buzzer off” can still be operated when the keyboard is blocked.
Fire Alarm Control IQ8Control
7
2.2 Function of the display and operating elements The display and operating of the FA IQ8Control are available with the standard display or the larger ¼ VGA display in both variants. In this documentation, the display is described using the 4-line standard display as an example. Slight differences in how information is displayed are possible with the ¼ VGA display.
1
2
1
2
3
5
4 3
5
4
Fig. 4: Operating elements - keypad - display
Operating elements - keypad - 1/4 VGA display
c
Common displays
d
Alphanumeric display standard or ¼ VGA display
e
Menu
f
Function key
g
Cursor key
All received signals such as fire, trouble or switch-off are shown in the alphanumeric display in alphanumeric form (8 lines, 40 characters per line). Keyboard By means of the key switch, the keyboard is unlocked for operation. With these keys, it is possible to control functions such as switching detector zones and detectors on and off. Function keys With the four function keys, the menu options positioned above them in the alphanumeric display are selected. Depending on the current state of the fire alarm control or the operation level, differing menu options are shown in the display.
8
Fire Alarm Control IQ8Control
Fire Releasing System Master Box (MB) Notify Fire Dept. Fig. 5: Common display fire
The common display Fire is activated if at least one fire alarm has been detected. The originating detector or detector zone will be shown on the alphanumeric display. If evacuation plans or guidelines exist for cases of fire alarm, these plans have to be followed and the premises have to be evacuated, if necessary. Make sure to inform yourself well in advance about existing escape routes and required measures in case of a fire.
Fire
⇒
Fire alarm ! An external alarm is triggered. The fire and rescue services are alarmed via the connected master box. If no master box (MFAB) is connected or if this could not be activated, the LED Call fire brigade is also on.
⇒
The fire releasing control equipment has been activated.
⇒
The master box (MB) is activated and the intervention staff (e.g. fire department) has been alarmed.
Fire
Red LED is permanently on Fire Releasing System
Red LED is permanently on Master box (MB)
Red LED is permanently on Notify fire department ⇒
Red LED is permanently on
The master box (MB) has malfunctioned or is switched off and cannot be activated. Call the fire department immediately!
Fire Alarm Control IQ8Control
9
Pre-Alarm Delay
Fig. 6:Common display pre-alarm
A Pre-alarm is signalled when an intelligent fire detector reaches the pre-alarm level or when in a programmed twin-loop/twin detector connection a loop or a detector have detected a fire alarm. The Pre-alarm is automatically reset if no further signals are transmitted. The common display Pre-alarm is extinguished and any activated alarm devices are switched off. If further alarm signals occur, a fire alarm is automatically initiated and the master box (MB) is activated. In case of a pre-alarm, it is important that the detector location and the cause of the alert are verified. PRE-ALARM
Pre-Alarm
⇒ Red LED is permanently on
At least one detector or detector zone is signalling the pre-alarm condition. The activated detector or the activated detector zone is indicated on the alphanumeric display.
Control actions assigned to this event by means of customer data programming, e.g. relay outputs for activating internal signalling devices or evacuation signals will be executed.
On pre-alarm, the master box for alarming the emergency services will not be activated.
10
Fire Alarm Control IQ8Control
Delay An on/off switching interval has been programmed for the delay function.
Yellow LED is permanently on
⇒
During this time, the activating of the master box (MB) due to a fire alarm is automatically delayed by the delay time programmed in the customer database.
An alarm signal has been detected during the active delay time. ⇒ Yellow LED blinks
The programmed delay time has been initiated. The master box is activated after expiry of this time.
The /Buzzer off key has activated the function . ⇒ Yellow LED is permanently on
The programmed time for the of the cause of the alarm is running. The master box is only activated after the expiry of the time.
The function Delay/ is described in Section 4.7.
Fire Alarm Control IQ8Control
11
Trouble in Operation
U Failure Power Supply Fig. 7: Common display TROUBLE
The common display Trouble is activated if at least one malfunction has been detected. The reason will be shown on the alphanumeric display. Trouble
Trouble
⇒
A component of the fire alarm control or a monitored relay output such as an external alarm device or a master box has malfunctioned.
⇒
The power supply (battery or mains voltage) is connected. The fire alarm control is in an operative condition.
Yellow LED is permanently on Operation
Green LED is permanently on U failure
Yellow LED is permanently on
⇒
The fire alarm control is only partially operative due to a malfunction of the control functions. Display or operation of the control is no longer possible (Exception: Key Buzzer off). The activating of the master box (MB) and the LED Master box (MB) and Notify fire department is still operative in the U failure mode of the control in the case of a fire alarm.
Power supply
⇒
The power supply (battery or mains voltage) is out of order.
Yellow LED is permanently on
In cases of malfunction or emergency operation, correct functioning of the FA is no longer ensured. Inform customer/maintenance service!
12
Fire Alarm Control IQ8Control
Disconnection Relay Outputs
Master Box Testmode Fig. 8: Common display Disconnection
The common display Disconnection indicates that at least one output, input, or other component of the FA has been disconnected. The disconnection will also be shown on the alphanumeric display. Disconnection (common display)
Disconnection
⇒
At least one input/output e.g. a detector zone or relay has been switched off.
⇒
At least one relay output (AE) such as an internal control relay or the control of an esserbus® transponder has been switched off.
⇒
The master box (MB) is switched off, e.g. for servicing, by enablement of the keyboard with the key switch.
Yellow LED is permanently on Outputs
Yellow LED is permanently on Master box (MB)
Yellow LED is permanently on
A switched off master box will not transmit an alarm signal in the case of an event!
Testmode
⇒
A component of the control (e.g. detector zone) has been set to Testmode for servicing and maintenance work.
Yellow LED lights
A detector zone in Testmode will not transmit an alarm in the case of an event.
Fire Alarm Control IQ8Control
13
Fig. 9: Single zone indicator units (GEA)
Optical displays (LED) for a total of 64 detector zones may be integrated into the control of the IQ8Control. Fire is signalled by a red LED. A yellow LED signals malfunctions and disconnections. There is a labelling field for each detector zone, which can be marked with the name of the zone or of the area monitored by this group of detectors. Fire
⇒
At least one detector and / or one manual call point in the detector zone is signalling a fire alarm.
⇒
For the zone, which first signalled the fire alarm (initial alarm detection).
Red LED is permanently on
Red LED blinks Disconnection / Trouble
⇒
The detector zone is switched off. Switching detector zones on/off see Section 4.2.
Yellow LED is permanently on
At least one detector of the detector zone has malfunctioned. ⇒ Yellow LED blinks
Inform customer/maintenance service!
Switched off or malfunctioning detector zones will not transmit an alarm in the case of an event.
14
Fire Alarm Control IQ8Control
Delay
Delay
When this key is pressed, the delay time is enabled/disabled (toggle function). See Section 4.7 Delay/.
reset
reset
All detected fire alarms, detector zones, displays and technical alarm signals (TAL alarm) are cancelled and returned to normal condition.
Audible Alarm off
Disconnect Relay
Activation of the relays of this , which were programmed with the Audible alarm off function in the customer data, such as the relays with connected audible and optical signaling devices, is switched on or off (toggle function). Switch-offs are displayed visually in the common display Disconnection field.
Disconnect Master Box
Disconnect Master Box
The activating of the master box (MB) is switched on or off (toggle function). Switch-offs are displayed visually in the Common display disconnection field.
Switched off alarm devices and master boxes will not transmit an alarm in the case of an event. The fire brigade is not notified automatically.
Fire Alarm Control IQ8Control Additional messages
Additional Messages
Additional messages can be shown in the display. The first and last messages with the highest priority are shown in the display approximately 20 seconds after the key was last pressed. By pressing this key the next message of the same or next level will be displayed. The key Additional Messages remains functional when the keyboard is locked (key-operated switch)!
/ Buzzer off
Buzzer off
Start of the programmed time up to the delay activating of the master box. The Delay/ function is explained in section 4.7. Buzzer off Acknowledgement of the control buzzer. This key remains active when the keyboard is locked. The buzzer is reactivated in the case of a further event.
15
16
Fire Alarm Control IQ8Control
3 Operating status of the fire alarm control The current operating status of the IQ8Control is shown on the operating . Six different operating conditions are possible.
3.1
Normal condition
The normal condition refers to an operative monitoring state of the control unchanged by external influences. •
The green LED in Operation lights.
•
No further displays or messages.
•
The key switch locks the operating keyboard.
3.2
Fire
•
The control is in alarm mode, i.e. it is signalling a fire alarm.
•
The common display FIRE (red LED) lights.
•
The master box (MB) has been activated.
•
The internal control buzzer sounds.
•
External alarm devices, e.g. acoustic alarm devices or control buzzers are activated.
•
The zone, which has detected the fire, is shown in the display with the programmed additional text.
•
The red LED of the corresponding zone(s) lights in the single zone indicator units (optional). If several zones signal a fire alarm, the red LED of the zone, which first detected the fire, blinks (initial alarm detection).
•
The red LED Master box (MB) lights when a master box for automatic transmission of the alarm is connected and the fire department has been informed.
•
Possibly, the red LED Notify fire department may light. The fire department has not been informed via the master box. Call the fire department immediately!
Fire Alarm Control IQ8Control
3.3
17
Trouble
The common display TROUBLE (yellow LED) lights and the control buzzer sounds intermittently. •
At least one control function has failed!
•
A message is shown in the display describing the failure/cause.
•
The yellow LED of the zone in which the malfunction has possibly occurred blinks on the single zone indicator units (optional).
Detector zones/relay loops or inputs/outputs will not signal an alarm in the case of an event. Inform customer/maintenance service!
3.4
U failure
The fire alarm control is only partially operative! •
No messages on the alphanumeric display.
•
No evaluation of information.
•
No activation of external equipment such as alarm sounders.
•
The master box and the Master box (MB) LED and Notify fire department will be activated even in the control U failure mode. A comprehensive operation of the fire alarm control is no longer provided. Call customer/maintenance service immediately!
18
Fire Alarm Control IQ8Control
3.5
Disconnection
The normal condition of the control has been changed by an external influence. Displays: •
The common display disconnection (yellow LED) lights.
•
Possibly, a further display in the Common display disconnection field may be signalled, showing which components have been switched off, e.g. Relay or Master box (MB).
•
The disconnection is reported in the display as a plaintext message.
•
A switched off detector zone is indicated on the single zone indicator units (optional) by a permanently lighting yellow LED. Switched off detector zones, detectors and controls (AE) and other parts of the equipment will not signal an alarm in the case of an event!
3.6
Testmode
The yellow LED Testmode is permanently on. The Testmode mode of the control has been activated for service and maintenance purposes: •
The function of detectors/detector zones is under inspection.
A detector zone in Testmode will not signal an alarm in the case of an event.
Fire Alarm Control IQ8Control
19
4 Operation The following section describes the most important operating actions for a single FA IQ8Control. If several processors are connected in a network through the essernet®, deviations from this description are possible. In this case, please ask your specialised installer. The operation of an installed and operative fire alarm control may only be carried out by authorised and trained personnel under observance of the safety precautions and, if necessary, in co-operation with the relevant emergency services (e.g. fire department).
4.1
Function keys / selection menu
Overview
F1
Service
Time func.
F2
F3
Info
or param. / add. text
F4
Fig. 10: Function keys / selection menu
Summary of the various menu options The selection menu allows direct access to logically grouped menu options. When the keyboard is unlocked, up to four menu options are constantly shown in the display, each of which can be selected using the function key located below it.
Status
⇒
Status display of current messages in order of significance.
Summery
⇒
Group display and number of the various types of message, such as fire, trouble, disconnection etc.
Service
⇒
Transfer to the service level to operate the primary loop functions such as switching primary loops, sensors etc. on/off.
20
Fire Alarm Control IQ8Control
Installer
⇒
Operating actions for the specialised installer for service and maintenance purposes. (Individual code required, if a code has been programmed.)
Time funct.
⇒
Entry of time/date and the switching times of the Delay/ function.
Escape
⇒
Termination of the current input prompt without storing or executing the function.
Acknowledge ⇒
Acknowledge the selected menu point/operation.
Function
⇒
Confirmation of the execution of the previously selected function.
Rem.Text
⇒
Query of the additional text display (Remote text) of other fire alarm control s in the essernet® network. If an event has been detected by a fire alarm control in the essernet®, the additional text from the activated fire alarm control can be displayed by the remote text function on another fire alarm control .
Information and additional text Info
Param/AT
⇒
Display of any programmed information text relating to the message in the alphanumeric display. If information text exists, i.e. has been programmed for this message, the menu point Info is displayed. If info text has not been programmed, the menu point Info is not displayed.
⇒
Display of the additional text programmed for the current message or a parameter. For a parameter, a works-programmed information text for the current message in the alphanumeric display is shown. It is possible to switch from additional text/parameter display using the function key. If additional text has not been programmed, the menu point Add. text is not displayed.
If information or additional text has been programmed for a message, the additional text (Param/AT) is always displayed first. Pushing the function key during the display of the additional text shows the information text.
Fire Alarm Control IQ8Control
4.1.1
21
Display / display control
2
3
1
1. FIRE
Zone : 002 Det : 02 Office 1 Room 17 1st floor
15:10
28:07
1
3. FIRE
15:10 Zone : 002 Det : 02 EDP room Room 21 1st floor
28:07
Overview
Service
Time func.
Info
4
5
Fig. 11: Example display for a fire alarm (additional display)
c
In all, three fire signals were detected. The display shows the first (1.) and the last signal (in this case 3.) respectively. Pressing the cursor key scrolls the display, and the next signal (2.) is displayed.
d e f g
Time of this alarm message. Date of this alarm message. Additional text line (the additional text programmed for the triggered zone or detector will be displayed). Additional information text or parameter / additional text (Param/AT).
Significance of the display to "1. Fire" : •
First fire signal on 28.07 at 15:10 hours.
•
The detector No. 02 in the detector zone No. 02 signals Fire.
•
The additional text programmed for this detector zone "Office 1 Room 17 1st floor" provides information on the location of the fire.
•
The display field Info shows that an information text has been programmed for this detector zone, which can be accessed by pressing the corresponding function key.
22
Fire Alarm Control IQ8Control
1)
First / last message with the next higher priority
2)
A next message with equal priority
3)
First / last message with the next lower priority
4)
Prior message with equal priority
Fig. 12: Cursor keys
Further Displays / Messages For your information, the following additional messages (if existing) are shown in the alphanumeric display:
MB disconnected
⇒
When the activation of at least one master box (MB) for the warning of the fire department has been switched off, e.g. by enablement of the keyboard.
MB trouble
⇒
When at least one master box (MB) has malfunctioned.
Acoustic trouble
⇒
When at least one acoustic alarm device has malfunctioned.
Acoustic disconnected.
⇒
When at least one acoustic alarm device has been disconnected.
Revision active
⇒
When the fire alarm control has been switched to revision on the fire department operating .
Fire Alarm Control IQ8Control
4.1.2
23
Display priority of the messages in the display Additional Messages
Fig. 13: Additional Message Key
Display priority The first and last messages with the highest current priority are shown in the alphanumeric display of the FA IQ8Control respectively. If several messages with equal priority are imminent, these can be queried by pressing the key Additional Messages. Priority stage
Condition
Display
1
Fire alarm
FIRE
2
Fire alarm primary loop
FIRE
3
Technical alarm
T-ALARM
4
Pre-alarm
PRE ALARM
5
Trouble
TROUBLE
6
Trouble primary loop
LINE TROUBLE
7
Transfer route switched on (Primary loop)
LINE ON
8
System trouble
SYS TROUBLE
9
Disconnection
DISCONNECTION
10
Disconnection primary loop
LINE OFF
11
Trouble relay output AE
TROUBLE
12
Switch-off relay output AE
O/P OFF
13
Activate AE
ACTIVATE
14
Testmode
TEST
If the control is operated during the display, the corresponding function is carried out. The message with the highest priority reappears in the display automatically approx. 20 seconds after the last key has been pressed.
24
4.1.3
Fire Alarm Control IQ8Control
Info text / additional text and parameter display
1. FIRE
1
Zone : 002 Det : 02 Office 1 Room 17 1st floor
15:10
28:07
2
Access via stairway right Inform Mr. J. Smith (Tel. 02137 / 99152) Status
Param/*T
Fig. 14: Info text display
c Info
Display of any programmed information text relating to the message in the alphanumeric display. If information text exists, i.e. has been programmed for this message, the menu point Info is displayed. If info text has not been programmed, the menu point Info is not displayed.
d Param/AT
Display of the additional text programmed for the current message or a parameter. For a parameter, a works-programmed information text for the current message in the alphanumeric display is shown. It is possible to switch between additional text/parameter display using the function key. If additional text has not been programmed, the menu point Add. text is not displayed.
If information or additional text and a parameter have been programmed for a message, the information and additional text is always displayed first. Pushing the Param./AT function key during the display of the additional text shows the parameter.
Example of an info text display (Fig. 14) Access to programmed information text for this message programmed in the customer data and related to the zones (max. 4 lines / 40 characters per line) can be attained by pressing the function key Info. In this example, the following two-line info text was programmed for detector zone 02 in a fire condition: Access via stairway right! Inform Mr. J. Smith (Tel. 02137/ 99152) Info text / additional text and parameter display
Pressing the Condition function key returns the to the condition display. The display switches automatically to the preceding menu point approx. 20 sec. after the last operation.
Fire Alarm Control IQ8Control
4.2
25
Entering time/date
Time fct.
Time/Date Time Date Delay on
Escape
: 10:4 : Tu. 02.06.99 : --:-- off: --:-Function
Fig. 15: Entering time/date
Entering the time or the date is carried out under the Time functions menu point, which is accessed by pressing the corresponding function key. The corresponding input field (hour, minute, day, etc.) is marked using the cursor keys and the desired value is entered on the numeric keypad. When a date is entered DD.MM.YY, the day of the week (Mo, Tu, We...) is automatically calculated. Escape
⇒
Exits the menu point without storing the changes/inputs
Function
⇒
The numeric values shown in the display are stored
Entering times for the function Delay/; see Section 4.7!
Approx. 20 seconds after the last operating action, the display switches back automatically to the last menu point without storing the changes/inputs!
26
Fire Alarm Control IQ8Control
4.3
Detector zones
4.3.1
Switching on / resetting a detector zone
With switch-on/reset, a detector zone, which has been switched off -incl. all fire alarms-, is switched into the operative status or an operative detector zone is reset and any imminent messages such as Fire or Trouble are deleted.
Zone
4
On
Press key Fig. 16: Switching on / resetting a detector zone 4 (example)
Operation Zone: Detector:
4 0
Fig. 17: Display switching on zone 4
On in progress
Fire Alarm Control IQ8Control
4.3.2
27
Disconnect a detector zone
With the disconnection, the corresponding detector zone -incl. all fire alarms- is disconnected. The detector zone is selected by means of the corresponding zone number.
Zone
4
Off
Press key Fig. 18: Switching off / resetting a detector zone 4 (example)
Operation Zone: Detector:
Off in progress
4 0
Fig. 19: Display switching off zone 4
In addition to the message on the display, the Disconnect is indicated optically by the common display Disconnect on the control and the corresponding continuous lighting of the yellow LED on the single zone indicator unit (if present).
1. Disconnect Zone: 0004 Det: 15
11:10
22:11
Additional text (client text)
Overview
Service
Time funct.
Info
Fig. 20: Disconnect to status display
A disconnected detector zone will not signal an alarm in the case of an event!
28
Fire Alarm Control IQ8Control
4.3.3
Status of a detector zone
With this function, the current status, e.g. Normal, Alarm and Trouble, of the corresponding detector zone can be interrogated directly.
Zone
2
Press key Fig. 21: Status detector zone 2 (example)
Operation Status:
Zone : 0002 normal
End Fig. 22: Display Status zone 2
Status query
Fire Alarm Control IQ8Control
4.4
29
Detectors
Functions relating to detectors are only possible for addressable fire detectors of the Esser by Honeywell detector series 9100 and 9200 and IQ8Quad. These fire detectors can be selected and controlled by a detector address.
4.4.1
Switching on / resetting a detector
With switch-on, an individual disconnected detector of the selected detector zone is switched into the operative status or an active detector is reset and any imminent messages such as Fire or Trouble for this detector are deleted. Please note that the zone number has to be entered before the detector number.
Zone
2
Detector
Press key Fig. 23: Switching on detector zone 2 /detector 12 (example)
Operation Zone: Detector:
2 12
on in progress
Fig. 24:Display switching on detector zone 2 / detector 12
1
2
On
30
Fire Alarm Control IQ8Control
4.4.2
Disconnect a detector
With the disconnection, an individual detector of the selected detector zone is disconnected. In addition to the message on the display, the disconnection of the detector is indicated optically in the Common display Disconnect field. Individual detectors within a detector zone can only be disconnected if addressable Esser by Honeywell series 9100, 9200 and IQ8Quad detectors are used. Series 9000 standard fire detectors cannot be disconnected individually. Please note that the zone number has to be entered ahead of the detector number.
Zone
2
Detector
1
2
Press key Fig. 25: Disconnect detector zone 2 /detector 12 (example)
Operation Zone: Detector:
2 12
off in progress
Fig. 26: Display disconnect detector zone 2 / detector 12
A disconnected detector will not signal an alarm in the case of an event!
Off
Fire Alarm Control IQ8Control
4.4.3
31
Status of a detector
With this function, the current status, e.g. Normal, Alarm and Trouble, of the corresponding detector can be queried directly. Individual status query within a detector zone is only possible if addressable Esser by Honeywell series 9100, 9200 and IQ8Quad detectors are used. Series 9000 standard fire detectors cannot be queried individually. Please note that the zone number has to be entered ahead of the detector number.
Zone
2
Detector
Press key Fig. 27: Status detector zone 2 / detector 12 (example)
Operation Status:
Zone : 0002 normal
End Fig. 28: Display Status detector zone 2 / detector 12
Det : 0012
1
2
Status query
32
Fire Alarm Control IQ8Control
4.5
Controls
4.5.1
Switching on a control
With the switch-on, a previously switched off control (relay, open collector output) is switched back on. In case of an event, the switched-on output will be controlled in accordance with the programmed control conditions. Relay
2
Press key Fig. 29: Switching on Relay 2 (example)
Operation Relay : 2
Fig. 30: Display switching on Relay 2
On in progress
On
Fire Alarm Control IQ8Control
4.5.2
33
Disconnect a control
With the disconnection, a control (relay, open collector) is disconnected. In addition to the plaintext message in the display, the Disconnection of the control is indicated optically in the Common display disconnect field.
Relay
2
Off
Press key Fig. 31: Disconnect Relay 2 (example)
Operation Relay : 2
Off in progress
Fig. 32: Display disconnect Relay 2
Relays may be set to inverse by means of customer data programming of the IQ8Control. In this case, the relays will be activated in the normal state of the FA and deactivated in case of the associated event. If a relay for which inverse activation has been programmed is disconnected, it will be deactivated. Control of external equipment depends on the way in which it is connected to the NO/NC s of the relay.
The equipment connected to a disconnection control (e.g. alarm devices) is not activated in the case of an event.
34
Fire Alarm Control IQ8Control
4.5.3
Status of a control
With this function, the current status, e.g. Normal, Activated, Disconnection or Trouble of the corresponding control can be queried directly.
Relay
2
Status query
Press key Fig. 33: Status Relay 2 (example)
Operation Status query:
Relay : 0002 0001 message
End Fig. 34: Display status Relay 2
Relays may be set to inverse by means of customer data programming of the FA IQ8Control. In this case, the relays will be activated in the normal state of the FA and deactivated in case of the associated event. In normal operation of the FA IQ8Control, relays programmed for inverse activation are indicated as 'active'.
Fire Alarm Control IQ8Control
4.6
35
Common display of the status messages
In the common display Overview, all current messages such as Fire, disconnection, Trouble and other conditions of the fire alarm control are displayed, sorted by priority. If more messages are imminent than can be shown in the display, it is possible to "scroll" in the display with the cursor keys. Overview Fire Switch-off Switch-off AE Status
13:51 : : :
28:04
1 message 1 message 2 messages
Service
Time func.
Alarm counter
Fig. 35: Display overview
For a detailed status display of a particular message, mark the corresponding message line with the cursor and press the function key Status.
1. FIRE
Overview
Zone : 002 Det : 02 EDP room, paper store
Service
14:10
Time func.
28:04
1
Info
2
Fig. 36: Display for a detailed status message fire alarm (example)
c d
Additional text line associated with the triggered zone/detector (example). Additional information or parameters may be displayed by pressing function key Info.
36
Fire Alarm Control IQ8Control
4.7
Delay and
A switching time can be entered under this menu point Time functions by the operator of the fire alarm system in addition to the switching times programmed under the Delay/ function in the customer data (if programmed by the installer). Please consult your installer to find out whether the function Delay/ has been programmed in the customer data of your fire alarm control . If this function is not activated, e.g. for technical reasons or requirements, the functions described in this section cannot be used. If a fire alarm occurs during the active delay function, the master box (MB) is only activated after the expiry of the programmed delay time (max. 600 seconds). If the key is pressed during the delay time, the delay of the activating of the master box is extended by the verification time programmed in the customer data (max. 600 seconds). The cause of the alarm can be verified in this period. After the expiry of the delay and the verification times, the master box (MB) is activated automatically if the alarm state has not been cancelled and the activation of the master box inhibited by pressing the reset key.
Time func. Time/Date Time Date Delay on
: 10:42 : Tu. 02.06.99 : :-- off: --:--
Escape
Function
Fig. 37: Entering a switching point for the delay time
If a switching time for the function Delay/ has been programmed in the customer data by the installer of the fire alarm system, the first switch-on time and the first switch-off time is accepted as the valid switching time when an additional switching time is entered under this menu point Time functions. Exceptional days can be specified in the customer data programming on which the automatic, i.e. delay/ times programmed by the installer will not take effect. Example: Customer data programming:
Switch on 06.30, switch off 21.30
Operator's entry under this menu point:
Switch on 10.00, switch off 15.00
Valid switching time:
Switch on 06.30, switch off 15.00
Fire Alarm Control IQ8Control
4.7.1
37
Delay
By pressing the Delay key, the function Delay is started or ended manually (toggle function). The activated delay function is indicated on the operating by the continuously illuminated yellow LED delay.
Delay
Fig. 38: Delay key
If a fire alarm occurs when the delay function is activated, the activation of the master box (MB) is delayed by the delay time programmed in the customer data (max. 600 seconds). The blinking yellow LED indicates the initiated delay time in the operating .
4.7.2
If the delay time has been started due to a fire alarm, the activation of the master box can be delayed additionally to the delay time (max. 600 seconds) by the verification time (max. 600 seconds) for the of the cause of the alarm by pressing this key.
Buzzer off
Fig. 39: key
For the Delay and functions, pay attention to the guidelines of VdS Schadenverhütung GmbH.
38
Fire Alarm Control IQ8Control
4.8
Alarm counter
Differentiated display of the detected alarm signals from fire and technical alarm zones for this individual fire alarm control and the aggregate value of all other fire alarm control s interconnected in the essernet®.
Alarm counter Fire alarm Tech. alarm
10:24 : 6 : 2
Sum Sum
10:05
: 50 : 2
Overview Fig. 40: Display alarm counter
Example display This fire alarm control has detected 6 fire alarms and 2 technical alarms up to now. The sum of all alarm signals detected in the essernet® network amounts to 50 fire alarms and 2 technical alarms (TAL alarms). The alarm counter cannot be reset to - 0000.
Fire Alarm Control IQ8Control
4.9
39
Lamp test
Using the Lamp test function, all the light emitting diodes (LED) and the internal buzzer are activated for approx. 10 seconds to check the optical and audible display of the operating .
Test Press key Fig. 41: Lamp test start
•
All optical displays (LED) of the operating and the single zone indicator unit (if installed) illuminate
•
The display area of the alphanumeric display is completely darkened
•
The control buzzer sounds
•
The version number of the software is then shown on the display
This function ends automatically after approx. 10 seconds! Pressing the Test key again stops the lamp test before the expiry of 10 seconds!
40
Fire Alarm Control IQ8Control
5 Service Level The service level allows the operator to carry out operations or to switch off individual fire detectors and primary loops in a functional fire alarm system. These functions can also be performed on interconnected control s integrated in the essernet® network, i.e. independently of the control .
Overview
Service
time func.
Fig. 42: Function key "Service“ in the status level
Service 1 Primary loop function 2 Sensor function (loop) 3 Sensor function (zone / det.) Escape
Installer
Select
Fig. 43: Display in the service level
The following operations and switch-offs can be carried out in the service level on the fire alarm control without entering an authorisation code:
•
Primary loop functions
(see Section 5.1.1)
•
Sensor function (loop)
(see Section 5.1.2)
•
Sensor function (zone/detector)
(see Section 5.1.3)
Enter the number of the desired function or select the menu point directly with the cursor keys and press the Select function key. The service level is protected from unauthorised access by means of an access code. Any operation of the FA may only be carried out by authorised and trained persons under observance of the safety precautions and, if necessary, in cooperation with the emergency services (e.g. fire department).
Fire Alarm Control IQ8Control
5.1.1
41
Primary loop functions
Using this function, primary loops including all connected zones and loop devices can be switched on or off at the keypad. The switching state is indicated on the control and the alphanumeric display.
Primary loop / Transfer route Primary loop :
1 on / off 2 reset
Func. menu
Repeat
Select
Fig. 44: Entering the primary loop number
Primary loops are: •
all analog loop modules included in this FA (including the analog loop with all associated devices connected to this module)
•
all 4-zone-modules included in this FA (including all detector zones and detectors connected to this module)
•
certain modules such as relays or the interface on the basic/peripheral module
Switch on / disconnect Primary loops: •
Enter the 4-digit primary loop number which is to be switched on and press the Select function key
•
Enter the number of the desired function (1 = switch on/reset, 2 = switch off) or select the menu point with the cursor keys and press the Function key
In the case of an input error, pressing the Zone key can erase the display and the primary loop number can be re-entered. Switching off a primary loop switches off all detector zones and detectors connected to this module. Disconnected fire detectors and call points will not activate an alarm in the case of an event!
42
Fire Alarm Control IQ8Control
Slot and associated primary loop number Individual modules in the can be switched on/off via the keyboard with the internal, four-digit primary loop number or can also be programmed with the customer data editor. The internal primary loop number is made up from the number, the slot and the module number.
Example: FA IQ8Control ( number 01)
0113
0123
0133 0132 0131
2
1
3 Fig. 45: Example: FA IQ8Control
01
X
X Slot number of the Basic-, Field device- or Extension module
Slot number:
FA Number Stand-alone Network
Basic module = Nr. 1 Basic module slot 1 = Nr. 2 Basic module slot 2 = Nr. 3 (only FA IQ8Control M) = 01 = 01 – 31
Fire Alarm Control IQ8Control
5.1.2
43
Sensor functions (loop)
Using this function, detector sensors of the intelligent fire detector such as all O sensors (Optical = photoelectric sensor) or all I sensors (I = ionisation smoke sensors) or in OHI intelligent detectors the OI sensor combination in an analog loop can be switched off. If, for example, OHI intelligent detectors are disconnected with the function OI sensors off, only the third sensor - the H sensor (heat sensor) - remains active. Disconnecting the heat sensors (H sensors) is not possible.
Sensors (loop) Primary loop :
1 2 3 4
O -Sensor off OI-Sensor off I -Sensor off Sensors on
Escape
Function
Fig. 46: Sensor functions related to primary loops
O-detector
⇒
Optical fire detector with a single sensor (photoelectric sensor)
H-detector
⇒
Heat detector with a single sensor (Heat sensor)
I-detector
⇒
Ionisation smoke detector with a single sensor (Ionisation sensors)
OH-detector
⇒
Intelligent fire detectors with two various sensors (OT= Photoelectric and Heat sensor)
OHI-detector
⇒
Intelligent fire detectors with three various sensors (OTI= Photoelectric-, Heat - and Ionisation sensors)
It is only possible to switch off sensors with the OH and OHI intelligent fire detectors.
44
Fire Alarm Control IQ8Control
Example of switching off sensors in an analog loop: •
Enter the primary loop number of the analog loop in which the sensors are to be switched off and press the Select function key
•
Enter the number of the desired function (1 = O sensor off, 2 = OI sensor off, 3 = I sensor off, 4 = all sensors on) or select the function with the cursor keys and press the Function key
The selected sensor type is switched off on all intelligent detectors on the analog loop. It is only possible to switch off sensors with the OH and OHI intelligent fire detectors. If intelligent fire detectors are installed together with single-criteria detectors (detectors with just one sensor) on an analog loop, only the sensors on the intelligent detectors are switched off.
Switching on/off not permissible The switching on/Disconnection of the detector sensors is indicated in the display. If sensors have already been disconnected in an analog loop, for example I sensor off for all fire detectors or if there are no sensors of the selected type in this analog loop or a zone disconnect has been detected, the message "Switch on/Disconnect not permissible" is displayed. In an analog loop, it is generally only possible to execute a disconnection function, e.g. disconnected sensors or detectors, when no further, lower-order disconnected functions have been carried out; i.e. when individual detector sensors within a detector zone have been disconnected, this detector zone cannot be additionally disconnected, as disconnect functions for this detector zone have been carried out. However, it is possible to switch off other zones of this analog loop in which sensors/detectors have not been disconnected. In order to change the existing sensor switching status, all disconnected detector sensors must first be switched on, for example with the command all sensors on. After all detector sensors have been switched on, a further switching off/sensor disconnect can be performed.
Fire Alarm Control IQ8Control
5.1.3
45
Sensor functions (zone/detector)
Using this function, it is possible to switch off sensors in detector zones or in individual fire detectors in an analog loop. By entering the zone and detector number, individual sensors can be switched off in each single intelligent detector. If only the zone number is entered (detector number = 0), the desired sensor switch-off is performed for all intelligent detectors in this detector zone. If sensors have already been switched off in individual intelligent detectors in this zone, the message "Switch on/off not permissible" appears. All sensors must first be switched on in this zone before the desired sensors can be switched off. (See also Sensor function loop.)
Sensors (loop) Primary loop : Detector Func. menu
:
1 2 3 4
O -Sensor off OI-Sensor off I -Sensor off Sensors on Repeater
Select
Fig. 47: Sensor function related to zones/detectors
It is only possible to switch off sensors with the OH and OHI intelligent fire detectors. If intelligent fire detectors are installed together with single-criteria detectors (detectors with just one sensor) on an analog loop, only the sensors on the intelligent detectors are switched off. If a switch-off has already been performed, e.g. the sensors of a zone have been switched off, this detector zone or the entire analog loop cannot be additionally switched off. It is possible to switch off other detector zones of this analog loop in which detectors or sensors have not been switched off.
46 Notes
Fire Alarm Control IQ8Control
Fire Alarm Control IQ8Control Notes
47
Novar GmbH a Honeywell Company Dieselstraße 2, D-41469 Neuss E-Mail : [email protected] Internet: www.novar.de
798950.GB0 06.2005
G 299044
GB
Technical changes reserved!
2
Fire Alarm Control IQ8Control
Intended purpose This software must only be used for the applications outlined in the catalogue and the technical description and in combination with external components and systems, which have been approved or recommended by Esser by Honeywell.
Warning In order to ensure correct and safe operation of the product, all guidelines concerning its transport, storage, installation, and mounting must be observed. This includes the necessary care in operating the product.
Safety-relevant information This manual includes all information required for the proper use of the products described. The term 'qualified personnel' in the context of the safety information included in this manual or on the product itself designates: •
project engineers who are familiar with the safety guidelines concerning fire alarm and extinguishing systems.
•
trained service engineers who are familiar with the components of fire alarm and extinguishing systems and the information on their operation as included in this manual.
•
trained installation or service personnel with the necessary qualification for carrying out repairs on fire alarm and extinguishing systems or who are authorised to operate, ground and label electrical circuits and/or safety equipment/systems.
Safety warnings The following information is given in the interest of your personal safety and to prevent damage to the product described in this manual and all equipment connected to it. Safety information and warnings for the prevention of dangers putting at risk the life and health of and maintenance personnel as well as causing damage to the equipment itself are marked by the following pictograms. Within the context of this manual, these pictograms have the following meanings:
Warning sign Designates risks for man and/or machine. Non-compliance will create risks to man and/or machine. The level of risk is indicated by the word of warning:
Important information on a topic or a procedure and other important information!
This is an important guideline issued by VdS Schadenverhütung GmbH, Cologne. If the hazard alarm system is programmed in compliance with VdS, this section must be read very carefully and all instructions must be adhered to. Dismantling In accordance with Directive 2002/96/EG (WEEE), after being dismantled, electrical and electronic equipment is taken back by the manufacturer for proper disposal.
Fire Alarm Control IQ8Control
1
General ....................................................................................................................................................................... 4
2
General View.............................................................................................................................................................. 5 2.1
Key switch / enabling operation.......................................................................................................................... 6
2.2
Function of the display and operating elements................................................................................................ 7
3
Operating status of the fire alarm control ..................................................................................................... 16 3.1
Normal condition................................................................................................................................................ 16
3.2
Fire ...................................................................................................................................................................... 16
3.3
Trouble................................................................................................................................................................ 17
3.4
U failure ......................................................................................................................................................... 17
3.5
Disconnection..................................................................................................................................................... 18
3.6
Testmode ........................................................................................................................................................... 18
4
Operation .................................................................................................................................................................. 19 4.1
Function keys / selection menu ........................................................................................................................ 19 4.1.1 4.1.2 4.1.3
4.2
Entering time/date.............................................................................................................................................. 25
4.3
Detector zones................................................................................................................................................... 26 4.3.1 4.3.2 4.3.3
4.4
4.5
Switching on / resetting a detector zone ..................................................................................26 Disconnect a detector zone ......................................................................................................27 Status of a detector zone..........................................................................................................28
Detectors ............................................................................................................................................................ 29 4.4.1 4.4.2 4.4.3
Switching on / resetting a detector ...........................................................................................29 Disconnect a detector ...............................................................................................................30 Status of a detector...................................................................................................................31
Controls .............................................................................................................................................................. 32 4.5.1 4.5.2 4.5.3
Switching on a control...............................................................................................................32 Disconnect a control .................................................................................................................33 Status of a control.....................................................................................................................34
4.6
Common display of the status messages........................................................................................................ 35
4.7
Delay and ................................................................................................................................................. 36 4.7.1 4.7.2
5
Display / display control ............................................................................................................21 Display priority of the messages in the display ........................................................................23 Info text / additional text and parameter display.......................................................................24
Delay.........................................................................................................................................37 .........................................................................................................................................37
4.8
Alarm counter..................................................................................................................................................... 38
4.9
Lamp test............................................................................................................................................................ 39 Service Level ............................................................................................................................................................ 40 5.1.1 5.1.2 5.1.3
Primary loop functions ..............................................................................................................41 Sensor functions (loop).............................................................................................................43 Sensor functions (zone/detector)..............................................................................................45
3
4
Fire Alarm Control IQ8Control
1 General Thank you for buying a product from Esser by Honeywell. The quality and reliability of Esser products are well known and ensure the highest level of safety at their installation location for many, many years. This manual in combination with the instructions provided by your installer will quickly provide you with extensive information about the operation of the IQ8Control C/M fire alarm control . We recommend that you read this manual thoroughly and keep it together with the technical documentation of the fire alarm control . If you have any questions, please your installer.
To equip buildings, facilities, commonly frequented areas and working spaces with a fire warning system can only be carried out economically and with reasonable propriety when correspondingly well-founded safety concepts are developed and accordingly applied. Wherever the highest requirements are made on a fire warning system, whether in small commercial facilities or in industrial plants, the Fire Alarm Control IQ8Control transforms safety techniques and economy into practical reality. The modular design with different micro modules and individual extension concepts allow the FA IQ8Control to be easily adapted to special requirements. The FA IQ8Control represents the most modern standard of fire warning technology. A reliable fire warning facility is guaranteed by the application of "intelligent" fire detectors connected in an analog loop, which is tolerant to short and open circuits. In this analog loop - the esserbus® / esserbus® PLus - up to 127 loop devices each capable of being configured into 127 individual detector zones can be connected with an overall cable length of up to two kilometres. The esserbus® is a two-wire line supplied and monitored at both ends in ring topology. The Fire Alarm Control IQ8Control automatically s the wiring of the analog loop and determines the logical addresses of the individual loop devices. A separate adjustment of the addresses of the individual loop devices is unnecessary. Fire alarm s with esserbus® PLus analog loop provide the direct connection of addressable notification appliances, e.g. sounder to the loop. There is no need of an auxiliary power for these loop devices. Subscribers in the esserbus® are automatic intelligent fire detectors, manual call points and technical alarm modules (TAL) and the specially developed esserbus® transponder input/output devices. These esserbus® transponders are loop devices with freely programmable inputs and outputs, for example for the activation and monitoring of external devices such as display s, alarm devices, door closers and other connected equipment. Using the essernet® safety network, 31 Fire Alarm Control IQ8Control or other network subscribers such as display and operating s or alarm devices can be connected in a homogenous network. Operation of the fire warning system, e.g. switching off a detector zone, is possible from any fire alarm control or operating in the essernet®. Signals such as alarm, trouble, disconnection or other events are transferred to all subscribers in the essernet® and can be accessed from any desired position. Data exchange can, according to the transfer rate, be carried out either with a twisted pair or a LAN cable. The essernet® communications protocol guarantees reliable data exchange even if a short or open circuit occurs in the network.
LED is permanently on
LED blinks
Fire Alarm Control IQ8Control
5
2 General View 1
2
3
4
5
6 7
8
10
9
Fig. 1: General view of the display and operating elements
c
Single zone indicator unit (GEA)
d
Common display FIRE
e
Common display PRE-ALARM
f
Common display TROUBLE
g
Common display disconnection
h
Alphanumeric display
i
Key switch
j
Operating elements
k
Function keys and keyboard
l
Opening for Programming via Serice PC Connector must locked with dummy plug for ESD protection
6
Fire Alarm Control IQ8Control
2.1
Key switch / enabling operation
The key switch can be used to lock the operating keyboard of the fire alarm control IQ8Control to prevent unauthorised operation. In normal operating mode, the keyboard should be locked.
Key switch in horizontal position
locked unlocked
Fig. 2: Keyboard unlocked
•
The keyboard is unlocked for the operation of the single IQ8Control and other processors interconnected through the essernet®.
•
The display menu is activated.
•
The common disconnection display may be lit. Depending on the customer data programming, when the keyboard was unlocked, at least one zone, one output or one component of the fire alarm control , such as the master box, was switched off.
In case of a fire alarm, FA will disable the activation of the master box (MB). The fire brigade will not be alarmed, automatically. In case of an event, the red LED Notify fire department will be lit.
Key switch in vertical position
locked unlocked
Fig. 3: Keyboard blocked
•
The keyboard is blocked. The key can be removed.
•
The keys “Additional Messages” and “ / Buzzer off” can still be operated when the keyboard is blocked.
Fire Alarm Control IQ8Control
7
2.2 Function of the display and operating elements The display and operating of the FA IQ8Control are available with the standard display or the larger ¼ VGA display in both variants. In this documentation, the display is described using the 4-line standard display as an example. Slight differences in how information is displayed are possible with the ¼ VGA display.
1
2
1
2
3
5
4 3
5
4
Fig. 4: Operating elements - keypad - display
Operating elements - keypad - 1/4 VGA display
c
Common displays
d
Alphanumeric display standard or ¼ VGA display
e
Menu
f
Function key
g
Cursor key
All received signals such as fire, trouble or switch-off are shown in the alphanumeric display in alphanumeric form (8 lines, 40 characters per line). Keyboard By means of the key switch, the keyboard is unlocked for operation. With these keys, it is possible to control functions such as switching detector zones and detectors on and off. Function keys With the four function keys, the menu options positioned above them in the alphanumeric display are selected. Depending on the current state of the fire alarm control or the operation level, differing menu options are shown in the display.
8
Fire Alarm Control IQ8Control
Fire Releasing System Master Box (MB) Notify Fire Dept. Fig. 5: Common display fire
The common display Fire is activated if at least one fire alarm has been detected. The originating detector or detector zone will be shown on the alphanumeric display. If evacuation plans or guidelines exist for cases of fire alarm, these plans have to be followed and the premises have to be evacuated, if necessary. Make sure to inform yourself well in advance about existing escape routes and required measures in case of a fire.
Fire
⇒
Fire alarm ! An external alarm is triggered. The fire and rescue services are alarmed via the connected master box. If no master box (MFAB) is connected or if this could not be activated, the LED Call fire brigade is also on.
⇒
The fire releasing control equipment has been activated.
⇒
The master box (MB) is activated and the intervention staff (e.g. fire department) has been alarmed.
Fire
Red LED is permanently on Fire Releasing System
Red LED is permanently on Master box (MB)
Red LED is permanently on Notify fire department ⇒
Red LED is permanently on
The master box (MB) has malfunctioned or is switched off and cannot be activated. Call the fire department immediately!
Fire Alarm Control IQ8Control
9
Pre-Alarm Delay
Fig. 6:Common display pre-alarm
A Pre-alarm is signalled when an intelligent fire detector reaches the pre-alarm level or when in a programmed twin-loop/twin detector connection a loop or a detector have detected a fire alarm. The Pre-alarm is automatically reset if no further signals are transmitted. The common display Pre-alarm is extinguished and any activated alarm devices are switched off. If further alarm signals occur, a fire alarm is automatically initiated and the master box (MB) is activated. In case of a pre-alarm, it is important that the detector location and the cause of the alert are verified. PRE-ALARM
Pre-Alarm
⇒ Red LED is permanently on
At least one detector or detector zone is signalling the pre-alarm condition. The activated detector or the activated detector zone is indicated on the alphanumeric display.
Control actions assigned to this event by means of customer data programming, e.g. relay outputs for activating internal signalling devices or evacuation signals will be executed.
On pre-alarm, the master box for alarming the emergency services will not be activated.
10
Fire Alarm Control IQ8Control
Delay An on/off switching interval has been programmed for the delay function.
Yellow LED is permanently on
⇒
During this time, the activating of the master box (MB) due to a fire alarm is automatically delayed by the delay time programmed in the customer database.
An alarm signal has been detected during the active delay time. ⇒ Yellow LED blinks
The programmed delay time has been initiated. The master box is activated after expiry of this time.
The /Buzzer off key has activated the function . ⇒ Yellow LED is permanently on
The programmed time for the of the cause of the alarm is running. The master box is only activated after the expiry of the time.
The function Delay/ is described in Section 4.7.
Fire Alarm Control IQ8Control
11
Trouble in Operation
U Failure Power Supply Fig. 7: Common display TROUBLE
The common display Trouble is activated if at least one malfunction has been detected. The reason will be shown on the alphanumeric display. Trouble
Trouble
⇒
A component of the fire alarm control or a monitored relay output such as an external alarm device or a master box has malfunctioned.
⇒
The power supply (battery or mains voltage) is connected. The fire alarm control is in an operative condition.
Yellow LED is permanently on Operation
Green LED is permanently on U failure
Yellow LED is permanently on
⇒
The fire alarm control is only partially operative due to a malfunction of the control functions. Display or operation of the control is no longer possible (Exception: Key Buzzer off). The activating of the master box (MB) and the LED Master box (MB) and Notify fire department is still operative in the U failure mode of the control in the case of a fire alarm.
Power supply
⇒
The power supply (battery or mains voltage) is out of order.
Yellow LED is permanently on
In cases of malfunction or emergency operation, correct functioning of the FA is no longer ensured. Inform customer/maintenance service!
12
Fire Alarm Control IQ8Control
Disconnection Relay Outputs
Master Box Testmode Fig. 8: Common display Disconnection
The common display Disconnection indicates that at least one output, input, or other component of the FA has been disconnected. The disconnection will also be shown on the alphanumeric display. Disconnection (common display)
Disconnection
⇒
At least one input/output e.g. a detector zone or relay has been switched off.
⇒
At least one relay output (AE) such as an internal control relay or the control of an esserbus® transponder has been switched off.
⇒
The master box (MB) is switched off, e.g. for servicing, by enablement of the keyboard with the key switch.
Yellow LED is permanently on Outputs
Yellow LED is permanently on Master box (MB)
Yellow LED is permanently on
A switched off master box will not transmit an alarm signal in the case of an event!
Testmode
⇒
A component of the control (e.g. detector zone) has been set to Testmode for servicing and maintenance work.
Yellow LED lights
A detector zone in Testmode will not transmit an alarm in the case of an event.
Fire Alarm Control IQ8Control
13
Fig. 9: Single zone indicator units (GEA)
Optical displays (LED) for a total of 64 detector zones may be integrated into the control of the IQ8Control. Fire is signalled by a red LED. A yellow LED signals malfunctions and disconnections. There is a labelling field for each detector zone, which can be marked with the name of the zone or of the area monitored by this group of detectors. Fire
⇒
At least one detector and / or one manual call point in the detector zone is signalling a fire alarm.
⇒
For the zone, which first signalled the fire alarm (initial alarm detection).
Red LED is permanently on
Red LED blinks Disconnection / Trouble
⇒
The detector zone is switched off. Switching detector zones on/off see Section 4.2.
Yellow LED is permanently on
At least one detector of the detector zone has malfunctioned. ⇒ Yellow LED blinks
Inform customer/maintenance service!
Switched off or malfunctioning detector zones will not transmit an alarm in the case of an event.
14
Fire Alarm Control IQ8Control
Delay
Delay
When this key is pressed, the delay time is enabled/disabled (toggle function). See Section 4.7 Delay/.
reset
reset
All detected fire alarms, detector zones, displays and technical alarm signals (TAL alarm) are cancelled and returned to normal condition.
Audible Alarm off
Disconnect Relay
Activation of the relays of this , which were programmed with the Audible alarm off function in the customer data, such as the relays with connected audible and optical signaling devices, is switched on or off (toggle function). Switch-offs are displayed visually in the common display Disconnection field.
Disconnect Master Box
Disconnect Master Box
The activating of the master box (MB) is switched on or off (toggle function). Switch-offs are displayed visually in the Common display disconnection field.
Switched off alarm devices and master boxes will not transmit an alarm in the case of an event. The fire brigade is not notified automatically.
Fire Alarm Control IQ8Control Additional messages
Additional Messages
Additional messages can be shown in the display. The first and last messages with the highest priority are shown in the display approximately 20 seconds after the key was last pressed. By pressing this key the next message of the same or next level will be displayed. The key Additional Messages remains functional when the keyboard is locked (key-operated switch)!
/ Buzzer off
Buzzer off
Start of the programmed time up to the delay activating of the master box. The Delay/ function is explained in section 4.7. Buzzer off Acknowledgement of the control buzzer. This key remains active when the keyboard is locked. The buzzer is reactivated in the case of a further event.
15
16
Fire Alarm Control IQ8Control
3 Operating status of the fire alarm control The current operating status of the IQ8Control is shown on the operating . Six different operating conditions are possible.
3.1
Normal condition
The normal condition refers to an operative monitoring state of the control unchanged by external influences. •
The green LED in Operation lights.
•
No further displays or messages.
•
The key switch locks the operating keyboard.
3.2
Fire
•
The control is in alarm mode, i.e. it is signalling a fire alarm.
•
The common display FIRE (red LED) lights.
•
The master box (MB) has been activated.
•
The internal control buzzer sounds.
•
External alarm devices, e.g. acoustic alarm devices or control buzzers are activated.
•
The zone, which has detected the fire, is shown in the display with the programmed additional text.
•
The red LED of the corresponding zone(s) lights in the single zone indicator units (optional). If several zones signal a fire alarm, the red LED of the zone, which first detected the fire, blinks (initial alarm detection).
•
The red LED Master box (MB) lights when a master box for automatic transmission of the alarm is connected and the fire department has been informed.
•
Possibly, the red LED Notify fire department may light. The fire department has not been informed via the master box. Call the fire department immediately!
Fire Alarm Control IQ8Control
3.3
17
Trouble
The common display TROUBLE (yellow LED) lights and the control buzzer sounds intermittently. •
At least one control function has failed!
•
A message is shown in the display describing the failure/cause.
•
The yellow LED of the zone in which the malfunction has possibly occurred blinks on the single zone indicator units (optional).
Detector zones/relay loops or inputs/outputs will not signal an alarm in the case of an event. Inform customer/maintenance service!
3.4
U failure
The fire alarm control is only partially operative! •
No messages on the alphanumeric display.
•
No evaluation of information.
•
No activation of external equipment such as alarm sounders.
•
The master box and the Master box (MB) LED and Notify fire department will be activated even in the control U failure mode. A comprehensive operation of the fire alarm control is no longer provided. Call customer/maintenance service immediately!
18
Fire Alarm Control IQ8Control
3.5
Disconnection
The normal condition of the control has been changed by an external influence. Displays: •
The common display disconnection (yellow LED) lights.
•
Possibly, a further display in the Common display disconnection field may be signalled, showing which components have been switched off, e.g. Relay or Master box (MB).
•
The disconnection is reported in the display as a plaintext message.
•
A switched off detector zone is indicated on the single zone indicator units (optional) by a permanently lighting yellow LED. Switched off detector zones, detectors and controls (AE) and other parts of the equipment will not signal an alarm in the case of an event!
3.6
Testmode
The yellow LED Testmode is permanently on. The Testmode mode of the control has been activated for service and maintenance purposes: •
The function of detectors/detector zones is under inspection.
A detector zone in Testmode will not signal an alarm in the case of an event.
Fire Alarm Control IQ8Control
19
4 Operation The following section describes the most important operating actions for a single FA IQ8Control. If several processors are connected in a network through the essernet®, deviations from this description are possible. In this case, please ask your specialised installer. The operation of an installed and operative fire alarm control may only be carried out by authorised and trained personnel under observance of the safety precautions and, if necessary, in co-operation with the relevant emergency services (e.g. fire department).
4.1
Function keys / selection menu
Overview
F1
Service
Time func.
F2
F3
Info
or param. / add. text
F4
Fig. 10: Function keys / selection menu
Summary of the various menu options The selection menu allows direct access to logically grouped menu options. When the keyboard is unlocked, up to four menu options are constantly shown in the display, each of which can be selected using the function key located below it.
Status
⇒
Status display of current messages in order of significance.
Summery
⇒
Group display and number of the various types of message, such as fire, trouble, disconnection etc.
Service
⇒
Transfer to the service level to operate the primary loop functions such as switching primary loops, sensors etc. on/off.
20
Fire Alarm Control IQ8Control
Installer
⇒
Operating actions for the specialised installer for service and maintenance purposes. (Individual code required, if a code has been programmed.)
Time funct.
⇒
Entry of time/date and the switching times of the Delay/ function.
Escape
⇒
Termination of the current input prompt without storing or executing the function.
Acknowledge ⇒
Acknowledge the selected menu point/operation.
Function
⇒
Confirmation of the execution of the previously selected function.
Rem.Text
⇒
Query of the additional text display (Remote text) of other fire alarm control s in the essernet® network. If an event has been detected by a fire alarm control in the essernet®, the additional text from the activated fire alarm control can be displayed by the remote text function on another fire alarm control .
Information and additional text Info
Param/AT
⇒
Display of any programmed information text relating to the message in the alphanumeric display. If information text exists, i.e. has been programmed for this message, the menu point Info is displayed. If info text has not been programmed, the menu point Info is not displayed.
⇒
Display of the additional text programmed for the current message or a parameter. For a parameter, a works-programmed information text for the current message in the alphanumeric display is shown. It is possible to switch from additional text/parameter display using the function key. If additional text has not been programmed, the menu point Add. text is not displayed.
If information or additional text has been programmed for a message, the additional text (Param/AT) is always displayed first. Pushing the function key during the display of the additional text shows the information text.
Fire Alarm Control IQ8Control
4.1.1
21
Display / display control
2
3
1
1. FIRE
Zone : 002 Det : 02 Office 1 Room 17 1st floor
15:10
28:07
1
3. FIRE
15:10 Zone : 002 Det : 02 EDP room Room 21 1st floor
28:07
Overview
Service
Time func.
Info
4
5
Fig. 11: Example display for a fire alarm (additional display)
c
In all, three fire signals were detected. The display shows the first (1.) and the last signal (in this case 3.) respectively. Pressing the cursor key scrolls the display, and the next signal (2.) is displayed.
d e f g
Time of this alarm message. Date of this alarm message. Additional text line (the additional text programmed for the triggered zone or detector will be displayed). Additional information text or parameter / additional text (Param/AT).
Significance of the display to "1. Fire" : •
First fire signal on 28.07 at 15:10 hours.
•
The detector No. 02 in the detector zone No. 02 signals Fire.
•
The additional text programmed for this detector zone "Office 1 Room 17 1st floor" provides information on the location of the fire.
•
The display field Info shows that an information text has been programmed for this detector zone, which can be accessed by pressing the corresponding function key.
22
Fire Alarm Control IQ8Control
1)
First / last message with the next higher priority
2)
A next message with equal priority
3)
First / last message with the next lower priority
4)
Prior message with equal priority
Fig. 12: Cursor keys
Further Displays / Messages For your information, the following additional messages (if existing) are shown in the alphanumeric display:
MB disconnected
⇒
When the activation of at least one master box (MB) for the warning of the fire department has been switched off, e.g. by enablement of the keyboard.
MB trouble
⇒
When at least one master box (MB) has malfunctioned.
Acoustic trouble
⇒
When at least one acoustic alarm device has malfunctioned.
Acoustic disconnected.
⇒
When at least one acoustic alarm device has been disconnected.
Revision active
⇒
When the fire alarm control has been switched to revision on the fire department operating .
Fire Alarm Control IQ8Control
4.1.2
23
Display priority of the messages in the display Additional Messages
Fig. 13: Additional Message Key
Display priority The first and last messages with the highest current priority are shown in the alphanumeric display of the FA IQ8Control respectively. If several messages with equal priority are imminent, these can be queried by pressing the key Additional Messages. Priority stage
Condition
Display
1
Fire alarm
FIRE
2
Fire alarm primary loop
FIRE
3
Technical alarm
T-ALARM
4
Pre-alarm
PRE ALARM
5
Trouble
TROUBLE
6
Trouble primary loop
LINE TROUBLE
7
Transfer route switched on (Primary loop)
LINE ON
8
System trouble
SYS TROUBLE
9
Disconnection
DISCONNECTION
10
Disconnection primary loop
LINE OFF
11
Trouble relay output AE
TROUBLE
12
Switch-off relay output AE
O/P OFF
13
Activate AE
ACTIVATE
14
Testmode
TEST
If the control is operated during the display, the corresponding function is carried out. The message with the highest priority reappears in the display automatically approx. 20 seconds after the last key has been pressed.
24
4.1.3
Fire Alarm Control IQ8Control
Info text / additional text and parameter display
1. FIRE
1
Zone : 002 Det : 02 Office 1 Room 17 1st floor
15:10
28:07
2
Access via stairway right Inform Mr. J. Smith (Tel. 02137 / 99152) Status
Param/*T
Fig. 14: Info text display
c Info
Display of any programmed information text relating to the message in the alphanumeric display. If information text exists, i.e. has been programmed for this message, the menu point Info is displayed. If info text has not been programmed, the menu point Info is not displayed.
d Param/AT
Display of the additional text programmed for the current message or a parameter. For a parameter, a works-programmed information text for the current message in the alphanumeric display is shown. It is possible to switch between additional text/parameter display using the function key. If additional text has not been programmed, the menu point Add. text is not displayed.
If information or additional text and a parameter have been programmed for a message, the information and additional text is always displayed first. Pushing the Param./AT function key during the display of the additional text shows the parameter.
Example of an info text display (Fig. 14) Access to programmed information text for this message programmed in the customer data and related to the zones (max. 4 lines / 40 characters per line) can be attained by pressing the function key Info. In this example, the following two-line info text was programmed for detector zone 02 in a fire condition: Access via stairway right! Inform Mr. J. Smith (Tel. 02137/ 99152) Info text / additional text and parameter display
Pressing the Condition function key returns the to the condition display. The display switches automatically to the preceding menu point approx. 20 sec. after the last operation.
Fire Alarm Control IQ8Control
4.2
25
Entering time/date
Time fct.
Time/Date Time Date Delay on
Escape
: 10:4 : Tu. 02.06.99 : --:-- off: --:-Function
Fig. 15: Entering time/date
Entering the time or the date is carried out under the Time functions menu point, which is accessed by pressing the corresponding function key. The corresponding input field (hour, minute, day, etc.) is marked using the cursor keys and the desired value is entered on the numeric keypad. When a date is entered DD.MM.YY, the day of the week (Mo, Tu, We...) is automatically calculated. Escape
⇒
Exits the menu point without storing the changes/inputs
Function
⇒
The numeric values shown in the display are stored
Entering times for the function Delay/; see Section 4.7!
Approx. 20 seconds after the last operating action, the display switches back automatically to the last menu point without storing the changes/inputs!
26
Fire Alarm Control IQ8Control
4.3
Detector zones
4.3.1
Switching on / resetting a detector zone
With switch-on/reset, a detector zone, which has been switched off -incl. all fire alarms-, is switched into the operative status or an operative detector zone is reset and any imminent messages such as Fire or Trouble are deleted.
Zone
4
On
Press key Fig. 16: Switching on / resetting a detector zone 4 (example)
Operation Zone: Detector:
4 0
Fig. 17: Display switching on zone 4
On in progress
Fire Alarm Control IQ8Control
4.3.2
27
Disconnect a detector zone
With the disconnection, the corresponding detector zone -incl. all fire alarms- is disconnected. The detector zone is selected by means of the corresponding zone number.
Zone
4
Off
Press key Fig. 18: Switching off / resetting a detector zone 4 (example)
Operation Zone: Detector:
Off in progress
4 0
Fig. 19: Display switching off zone 4
In addition to the message on the display, the Disconnect is indicated optically by the common display Disconnect on the control and the corresponding continuous lighting of the yellow LED on the single zone indicator unit (if present).
1. Disconnect Zone: 0004 Det: 15
11:10
22:11
Additional text (client text)
Overview
Service
Time funct.
Info
Fig. 20: Disconnect to status display
A disconnected detector zone will not signal an alarm in the case of an event!
28
Fire Alarm Control IQ8Control
4.3.3
Status of a detector zone
With this function, the current status, e.g. Normal, Alarm and Trouble, of the corresponding detector zone can be interrogated directly.
Zone
2
Press key Fig. 21: Status detector zone 2 (example)
Operation Status:
Zone : 0002 normal
End Fig. 22: Display Status zone 2
Status query
Fire Alarm Control IQ8Control
4.4
29
Detectors
Functions relating to detectors are only possible for addressable fire detectors of the Esser by Honeywell detector series 9100 and 9200 and IQ8Quad. These fire detectors can be selected and controlled by a detector address.
4.4.1
Switching on / resetting a detector
With switch-on, an individual disconnected detector of the selected detector zone is switched into the operative status or an active detector is reset and any imminent messages such as Fire or Trouble for this detector are deleted. Please note that the zone number has to be entered before the detector number.
Zone
2
Detector
Press key Fig. 23: Switching on detector zone 2 /detector 12 (example)
Operation Zone: Detector:
2 12
on in progress
Fig. 24:Display switching on detector zone 2 / detector 12
1
2
On
30
Fire Alarm Control IQ8Control
4.4.2
Disconnect a detector
With the disconnection, an individual detector of the selected detector zone is disconnected. In addition to the message on the display, the disconnection of the detector is indicated optically in the Common display Disconnect field. Individual detectors within a detector zone can only be disconnected if addressable Esser by Honeywell series 9100, 9200 and IQ8Quad detectors are used. Series 9000 standard fire detectors cannot be disconnected individually. Please note that the zone number has to be entered ahead of the detector number.
Zone
2
Detector
1
2
Press key Fig. 25: Disconnect detector zone 2 /detector 12 (example)
Operation Zone: Detector:
2 12
off in progress
Fig. 26: Display disconnect detector zone 2 / detector 12
A disconnected detector will not signal an alarm in the case of an event!
Off
Fire Alarm Control IQ8Control
4.4.3
31
Status of a detector
With this function, the current status, e.g. Normal, Alarm and Trouble, of the corresponding detector can be queried directly. Individual status query within a detector zone is only possible if addressable Esser by Honeywell series 9100, 9200 and IQ8Quad detectors are used. Series 9000 standard fire detectors cannot be queried individually. Please note that the zone number has to be entered ahead of the detector number.
Zone
2
Detector
Press key Fig. 27: Status detector zone 2 / detector 12 (example)
Operation Status:
Zone : 0002 normal
End Fig. 28: Display Status detector zone 2 / detector 12
Det : 0012
1
2
Status query
32
Fire Alarm Control IQ8Control
4.5
Controls
4.5.1
Switching on a control
With the switch-on, a previously switched off control (relay, open collector output) is switched back on. In case of an event, the switched-on output will be controlled in accordance with the programmed control conditions. Relay
2
Press key Fig. 29: Switching on Relay 2 (example)
Operation Relay : 2
Fig. 30: Display switching on Relay 2
On in progress
On
Fire Alarm Control IQ8Control
4.5.2
33
Disconnect a control
With the disconnection, a control (relay, open collector) is disconnected. In addition to the plaintext message in the display, the Disconnection of the control is indicated optically in the Common display disconnect field.
Relay
2
Off
Press key Fig. 31: Disconnect Relay 2 (example)
Operation Relay : 2
Off in progress
Fig. 32: Display disconnect Relay 2
Relays may be set to inverse by means of customer data programming of the IQ8Control. In this case, the relays will be activated in the normal state of the FA and deactivated in case of the associated event. If a relay for which inverse activation has been programmed is disconnected, it will be deactivated. Control of external equipment depends on the way in which it is connected to the NO/NC s of the relay.
The equipment connected to a disconnection control (e.g. alarm devices) is not activated in the case of an event.
34
Fire Alarm Control IQ8Control
4.5.3
Status of a control
With this function, the current status, e.g. Normal, Activated, Disconnection or Trouble of the corresponding control can be queried directly.
Relay
2
Status query
Press key Fig. 33: Status Relay 2 (example)
Operation Status query:
Relay : 0002 0001 message
End Fig. 34: Display status Relay 2
Relays may be set to inverse by means of customer data programming of the FA IQ8Control. In this case, the relays will be activated in the normal state of the FA and deactivated in case of the associated event. In normal operation of the FA IQ8Control, relays programmed for inverse activation are indicated as 'active'.
Fire Alarm Control IQ8Control
4.6
35
Common display of the status messages
In the common display Overview, all current messages such as Fire, disconnection, Trouble and other conditions of the fire alarm control are displayed, sorted by priority. If more messages are imminent than can be shown in the display, it is possible to "scroll" in the display with the cursor keys. Overview Fire Switch-off Switch-off AE Status
13:51 : : :
28:04
1 message 1 message 2 messages
Service
Time func.
Alarm counter
Fig. 35: Display overview
For a detailed status display of a particular message, mark the corresponding message line with the cursor and press the function key Status.
1. FIRE
Overview
Zone : 002 Det : 02 EDP room, paper store
Service
14:10
Time func.
28:04
1
Info
2
Fig. 36: Display for a detailed status message fire alarm (example)
c d
Additional text line associated with the triggered zone/detector (example). Additional information or parameters may be displayed by pressing function key Info.
36
Fire Alarm Control IQ8Control
4.7
Delay and
A switching time can be entered under this menu point Time functions by the operator of the fire alarm system in addition to the switching times programmed under the Delay/ function in the customer data (if programmed by the installer). Please consult your installer to find out whether the function Delay/ has been programmed in the customer data of your fire alarm control . If this function is not activated, e.g. for technical reasons or requirements, the functions described in this section cannot be used. If a fire alarm occurs during the active delay function, the master box (MB) is only activated after the expiry of the programmed delay time (max. 600 seconds). If the key is pressed during the delay time, the delay of the activating of the master box is extended by the verification time programmed in the customer data (max. 600 seconds). The cause of the alarm can be verified in this period. After the expiry of the delay and the verification times, the master box (MB) is activated automatically if the alarm state has not been cancelled and the activation of the master box inhibited by pressing the reset key.
Time func. Time/Date Time Date Delay on
: 10:42 : Tu. 02.06.99 : :-- off: --:--
Escape
Function
Fig. 37: Entering a switching point for the delay time
If a switching time for the function Delay/ has been programmed in the customer data by the installer of the fire alarm system, the first switch-on time and the first switch-off time is accepted as the valid switching time when an additional switching time is entered under this menu point Time functions. Exceptional days can be specified in the customer data programming on which the automatic, i.e. delay/ times programmed by the installer will not take effect. Example: Customer data programming:
Switch on 06.30, switch off 21.30
Operator's entry under this menu point:
Switch on 10.00, switch off 15.00
Valid switching time:
Switch on 06.30, switch off 15.00
Fire Alarm Control IQ8Control
4.7.1
37
Delay
By pressing the Delay key, the function Delay is started or ended manually (toggle function). The activated delay function is indicated on the operating by the continuously illuminated yellow LED delay.
Delay
Fig. 38: Delay key
If a fire alarm occurs when the delay function is activated, the activation of the master box (MB) is delayed by the delay time programmed in the customer data (max. 600 seconds). The blinking yellow LED indicates the initiated delay time in the operating .
4.7.2
If the delay time has been started due to a fire alarm, the activation of the master box can be delayed additionally to the delay time (max. 600 seconds) by the verification time (max. 600 seconds) for the of the cause of the alarm by pressing this key.
Buzzer off
Fig. 39: key
For the Delay and functions, pay attention to the guidelines of VdS Schadenverhütung GmbH.
38
Fire Alarm Control IQ8Control
4.8
Alarm counter
Differentiated display of the detected alarm signals from fire and technical alarm zones for this individual fire alarm control and the aggregate value of all other fire alarm control s interconnected in the essernet®.
Alarm counter Fire alarm Tech. alarm
10:24 : 6 : 2
Sum Sum
10:05
: 50 : 2
Overview Fig. 40: Display alarm counter
Example display This fire alarm control has detected 6 fire alarms and 2 technical alarms up to now. The sum of all alarm signals detected in the essernet® network amounts to 50 fire alarms and 2 technical alarms (TAL alarms). The alarm counter cannot be reset to - 0000.
Fire Alarm Control IQ8Control
4.9
39
Lamp test
Using the Lamp test function, all the light emitting diodes (LED) and the internal buzzer are activated for approx. 10 seconds to check the optical and audible display of the operating .
Test Press key Fig. 41: Lamp test start
•
All optical displays (LED) of the operating and the single zone indicator unit (if installed) illuminate
•
The display area of the alphanumeric display is completely darkened
•
The control buzzer sounds
•
The version number of the software is then shown on the display
This function ends automatically after approx. 10 seconds! Pressing the Test key again stops the lamp test before the expiry of 10 seconds!
40
Fire Alarm Control IQ8Control
5 Service Level The service level allows the operator to carry out operations or to switch off individual fire detectors and primary loops in a functional fire alarm system. These functions can also be performed on interconnected control s integrated in the essernet® network, i.e. independently of the control .
Overview
Service
time func.
Fig. 42: Function key "Service“ in the status level
Service 1 Primary loop function 2 Sensor function (loop) 3 Sensor function (zone / det.) Escape
Installer
Select
Fig. 43: Display in the service level
The following operations and switch-offs can be carried out in the service level on the fire alarm control without entering an authorisation code:
•
Primary loop functions
(see Section 5.1.1)
•
Sensor function (loop)
(see Section 5.1.2)
•
Sensor function (zone/detector)
(see Section 5.1.3)
Enter the number of the desired function or select the menu point directly with the cursor keys and press the Select function key. The service level is protected from unauthorised access by means of an access code. Any operation of the FA may only be carried out by authorised and trained persons under observance of the safety precautions and, if necessary, in cooperation with the emergency services (e.g. fire department).
Fire Alarm Control IQ8Control
5.1.1
41
Primary loop functions
Using this function, primary loops including all connected zones and loop devices can be switched on or off at the keypad. The switching state is indicated on the control and the alphanumeric display.
Primary loop / Transfer route Primary loop :
1 on / off 2 reset
Func. menu
Repeat
Select
Fig. 44: Entering the primary loop number
Primary loops are: •
all analog loop modules included in this FA (including the analog loop with all associated devices connected to this module)
•
all 4-zone-modules included in this FA (including all detector zones and detectors connected to this module)
•
certain modules such as relays or the interface on the basic/peripheral module
Switch on / disconnect Primary loops: •
Enter the 4-digit primary loop number which is to be switched on and press the Select function key
•
Enter the number of the desired function (1 = switch on/reset, 2 = switch off) or select the menu point with the cursor keys and press the Function key
In the case of an input error, pressing the Zone key can erase the display and the primary loop number can be re-entered. Switching off a primary loop switches off all detector zones and detectors connected to this module. Disconnected fire detectors and call points will not activate an alarm in the case of an event!
42
Fire Alarm Control IQ8Control
Slot and associated primary loop number Individual modules in the can be switched on/off via the keyboard with the internal, four-digit primary loop number or can also be programmed with the customer data editor. The internal primary loop number is made up from the number, the slot and the module number.
Example: FA IQ8Control ( number 01)
0113
0123
0133 0132 0131
2
1
3 Fig. 45: Example: FA IQ8Control
01
X
X Slot number of the Basic-, Field device- or Extension module
Slot number:
FA Number Stand-alone Network
Basic module = Nr. 1 Basic module slot 1 = Nr. 2 Basic module slot 2 = Nr. 3 (only FA IQ8Control M) = 01 = 01 – 31
Fire Alarm Control IQ8Control
5.1.2
43
Sensor functions (loop)
Using this function, detector sensors of the intelligent fire detector such as all O sensors (Optical = photoelectric sensor) or all I sensors (I = ionisation smoke sensors) or in OHI intelligent detectors the OI sensor combination in an analog loop can be switched off. If, for example, OHI intelligent detectors are disconnected with the function OI sensors off, only the third sensor - the H sensor (heat sensor) - remains active. Disconnecting the heat sensors (H sensors) is not possible.
Sensors (loop) Primary loop :
1 2 3 4
O -Sensor off OI-Sensor off I -Sensor off Sensors on
Escape
Function
Fig. 46: Sensor functions related to primary loops
O-detector
⇒
Optical fire detector with a single sensor (photoelectric sensor)
H-detector
⇒
Heat detector with a single sensor (Heat sensor)
I-detector
⇒
Ionisation smoke detector with a single sensor (Ionisation sensors)
OH-detector
⇒
Intelligent fire detectors with two various sensors (OT= Photoelectric and Heat sensor)
OHI-detector
⇒
Intelligent fire detectors with three various sensors (OTI= Photoelectric-, Heat - and Ionisation sensors)
It is only possible to switch off sensors with the OH and OHI intelligent fire detectors.
44
Fire Alarm Control IQ8Control
Example of switching off sensors in an analog loop: •
Enter the primary loop number of the analog loop in which the sensors are to be switched off and press the Select function key
•
Enter the number of the desired function (1 = O sensor off, 2 = OI sensor off, 3 = I sensor off, 4 = all sensors on) or select the function with the cursor keys and press the Function key
The selected sensor type is switched off on all intelligent detectors on the analog loop. It is only possible to switch off sensors with the OH and OHI intelligent fire detectors. If intelligent fire detectors are installed together with single-criteria detectors (detectors with just one sensor) on an analog loop, only the sensors on the intelligent detectors are switched off.
Switching on/off not permissible The switching on/Disconnection of the detector sensors is indicated in the display. If sensors have already been disconnected in an analog loop, for example I sensor off for all fire detectors or if there are no sensors of the selected type in this analog loop or a zone disconnect has been detected, the message "Switch on/Disconnect not permissible" is displayed. In an analog loop, it is generally only possible to execute a disconnection function, e.g. disconnected sensors or detectors, when no further, lower-order disconnected functions have been carried out; i.e. when individual detector sensors within a detector zone have been disconnected, this detector zone cannot be additionally disconnected, as disconnect functions for this detector zone have been carried out. However, it is possible to switch off other zones of this analog loop in which sensors/detectors have not been disconnected. In order to change the existing sensor switching status, all disconnected detector sensors must first be switched on, for example with the command all sensors on. After all detector sensors have been switched on, a further switching off/sensor disconnect can be performed.
Fire Alarm Control IQ8Control
5.1.3
45
Sensor functions (zone/detector)
Using this function, it is possible to switch off sensors in detector zones or in individual fire detectors in an analog loop. By entering the zone and detector number, individual sensors can be switched off in each single intelligent detector. If only the zone number is entered (detector number = 0), the desired sensor switch-off is performed for all intelligent detectors in this detector zone. If sensors have already been switched off in individual intelligent detectors in this zone, the message "Switch on/off not permissible" appears. All sensors must first be switched on in this zone before the desired sensors can be switched off. (See also Sensor function loop.)
Sensors (loop) Primary loop : Detector Func. menu
:
1 2 3 4
O -Sensor off OI-Sensor off I -Sensor off Sensors on Repeater
Select
Fig. 47: Sensor function related to zones/detectors
It is only possible to switch off sensors with the OH and OHI intelligent fire detectors. If intelligent fire detectors are installed together with single-criteria detectors (detectors with just one sensor) on an analog loop, only the sensors on the intelligent detectors are switched off. If a switch-off has already been performed, e.g. the sensors of a zone have been switched off, this detector zone or the entire analog loop cannot be additionally switched off. It is possible to switch off other detector zones of this analog loop in which detectors or sensors have not been switched off.
46 Notes
Fire Alarm Control IQ8Control
Fire Alarm Control IQ8Control Notes
47
Novar GmbH a Honeywell Company Dieselstraße 2, D-41469 Neuss E-Mail : [email protected] Internet: www.novar.de
Related Documents 2w1qw
October 2019 21
1installation Iq8 Control M Mu (1) 1p223j
July 2021 0
Toc Shimadzu Operation Instruction 3u334w
December 2019 34
Autoclave Operation Manual C 6u5x61
December 2019 59
Calypso C-m-m-guide v6p6z
November 2019 155
December 2021 0