Lm317k 381x3b
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 445h4w
Overview 1s532p
& View Lm317k as PDF for free.
More details 6h715l
- Words: 1,625
- Pages: 12
LM117/217 LM317
1.2V TO 37V VOLTAGE REGULATOR ■ ■ ■ ■
■
OUTPUT VOLTAGE RANGE : 1.2 TO 37V OUTPUT CURRENT IN EXCESS OF 1.5A 0.1% LINE AND LOAD REGULATION FLOATING OPERATION FOR HIGH VOLTAGES COMPLETE SERIES OF PROTECTIONS : CURRENT LIMITING, THERMAL SHUTDOWN AND SOA CONTROL
DESCRIPTION The LM117/LM217/LM317 are monolithic integrated circuit in TO-220, TO-220FP, TO-3 and D2PAK packages intended for use as positive adjustable voltage regulators. They are designed to supply more than 1.5A of load current with an output voltage adjustable over a 1.2 to 37V range. The nominal output voltage is selected by means of only a resistive divider, making the device exceptionally easy to use and eliminating the stocking of many fixed regulators.
TO-3
D2PAK
TO-220
TO-220FP
ABSOLUTE MAXIMUM RATING Symbol V i-o
Parameter
Value
Unit
40
V
Input-output Differential Voltage
IO
Output Current
T op
Operating Junction Temperature for: LM117 LM217 LM317
Intenrally Limited
P tot
Power Dissipation
T st g
Storage Temperature
o
-55 to 150 -25 to 150 0 to 125
C C o C o
Internally Limited o
- 65 to 150
C
THERMAL DATA Symbol
Parameter
R thj- ca se Thermal Resistance Junction-case R thj- amb Thermal Resistance Junction-ambient
November 2000
TO-3 Max Max
4 35
TO-220 3 50
TO-220FP 5 60
D2PAK 3 62.5
Unit o o
C/W C/W
1/11
LM117/217/317 CONNECTION DIAGRAM AND ORDERING NUMBERS (top view)
TO-220
TO-220FP
D2PAK
Type
TO-3
LM117
LM117K
LM217
LM217K
LM217T
LM317
LM317K
LM317T
SCHEMATIC DIAGRAM
2/11
TO-3
TO-220
TO-220FP
2
D PAK LM217D2T
LM317P
LM317D2T
LM117/217/317 BASIC ADJUSTABLE REGULATOR
ELECTRICAL CHARACTERISTICS (Vi - Vo = 5 V, Io = 500 mA, IMAX = 1.5A and PMAX = 20W, unless otherwise specified) Symbol
Parameter
Test Conditions
LM117/LM217 Min.
∆V o ∆V o
Line Regulation Load Regulation
Vi - Vo = 3 to 40 V Vo ≤ 5V Io = 10 mA to IMAX
T j = 25 o C o
Max.
LM317 Min.
Unit
Typ.
Max.
0.01
0.02
0.01
0.04
%/V
0.02
0.05
0.02
0.07
%/V
5
15
5
25
mV
20
50
20
70
mV
0.1
0.3
0.1
0.5
%
0.3
1
0.3
1.5
%
Adjustment Pin Current
50
100
50
100
µA
∆I ADJ
Adjustment Pin Current Vi - Vo = 2.5 to 40 V Io = 10 mA to IMAX
0.2
5
0.2
5
µA
V REF
Reference Voltage Vi - Vo = 2.5 to 40 V (between pin 3 and pin Io = 10 mA to IMAX 1) PD ≤ PMAX Output Voltage Temperature Stability
1.25
1.3
1.25
1.3
V
Vo ≥ 5V Io = 10 mA to IMAX I ADJ
∆ Vo Vo I o (m in)
Minimum Load Current Vi - Vo = 40 V
I o (max )
Maximum Load Current
T j = 25 C
Typ.
o
T j = 25 C
1.2
1 3.5
Vi - Vo ≤ 15 V PD < PMAX
1.5
Vi - Vo = 40 V PD < PMAX o Tj = 25 C eN SVR
Output Noise Voltage (percentance of VO)
B = 10Hz to 10KHz Tj = 25 oC
Supply Voltage Rejection (*)
Tj = 25 oC f = 120 Hz
1.2
C ADJ =0 C ADJ =10µF
66
2.2
1 5
3.5
10
mA
2.2
A
0.4
0.4
A
0.003
0.003
%
65
65
dB
80
dB
80
1.5
%
66
(*) CADJ is connected between pin 1 and ground. Note: (1) Unless otherwise specified the above specs, apply over the following conditions : LM 117 Tj = – 55 to 150°C; LM 217 Tj = – 25 to 150°C ; LM 317 Tj = 0 to 125°C.
3/11
LM117/217/317 Figure 1 : Output Current vs. Input-output Differential Voltage.
Figure 2 : Dropout Voltage vs. Junction Temperature.
Figure 3 : Reference Voltage vs. Junction
Figure 4 : Basic Adjustable Regulator.
APPLICATION INFORMATION The LM117/217/317 provides an internal reference voltage of 1.25V between the output and adjustments terminals. This is used to set a constant current flow across an external resistor divider (see fig. 4), giving an output voltage VO of: R2 VO = VREF (1 + ) + IADJ R2 R1 The device was designed to minimize the term IADJ (100µA max) and to maintain it very constant with line and load changes. Usually, the error term IADJ ⋅ R2 can be neglected. To obtain the previous requirement, all the regulator quiescent current is returned to the output terminal, imposing a minimum load current condition. If the load is insufficient, the output voltage will rise. Since the LM117/217317 is a floating regulator and ”sees” only the input-to-output differential 4/11
voltage, supplies of very high voltage with respect to ground can be regulated as long as the maximum input-to-output differential is not exceeded. Furthermore, programmable regulator are easily obtainable and, by connecting a fixed resistor between the adjustment and output, the device can be used as a precision current regulator. In order to optimise the load regulation, the current set resistor R1 (see fig. 4) should be tied as close as possible to the regulator, while the ground terminal of R2 should be near the ground of the load to provide remote ground sensing. Performance may be improved with added capacitance as follow: An input by capacitor of 0.1µF An adjustment terminal to ground 10µF capacitor
LM117/217/317 to improve the ripple rejection of about 15 dB (CADJ). An 1µF tantalium (or 25µFAluminium electrolitic) capacitor on the output to improve transient response. In additional to external capacitors, it is good
practice to add protection diodes, as shown in fig.5. D1 protect the device against input short circuit, while D2 protect against output short circuit for capacitance discharging.
Figure 5 : Voltage Regulator with Protection Diodes.
D1 protect the device against input short circuit, while D2 protects against output short circuit for capacitors discharging
Figure 6 : Slow Turn-on 15V Regulator.
Figure 7 : Current Regulator.
Io =
Vref R1
+ IADJ ≈
1.25V R1
5/11
LM117/217/317 Figure 8 : 5V Electronic Shut-down Regulator
Figure 9 : Digitally Selected Outputs
(R2 sets maximum Vo)
Figure 10 : Battery Charger (12V)
* RS sets output impedance of charger R2 Zo = RS (1 + ) R1 Use of RS allows low charging rates with fully charged battery.
6/11
Figure 11 : Current Limited 6V Charger
* R3 sets peak current (0.6A for 1Ω). ** C1 recommended to filter out input transients.
LM117/217/317
TO-3 (R) MECHANICAL DATA mm
DIM. MIN. A
inch
TYP.
MAX.
MIN.
TYP.
11.7
B
MAX.
0.460
0.96
1.10
0.037
0.043
C
1.70
0.066
D
8.7
0.342
E
20.0
0.787
G
10.9
0.429
N
16.9
0.665
P
26.2
R
3.88
1.031
4.09
U
0.152
39.50
V
1.555
30.10
1.185
A
P
D
C
O
N
B
V
E
G
U
0.161
R
P003N 7/11
LM117/217/317
TO-220 MECHANICAL DATA mm
DIM. MIN.
inch
TYP.
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
C
1.23
1.32
0.048
0.051
D
2.40
2.72
0.094
D1
0.107
1.27
0.050
E
0.49
0.70
0.019
0.027
F
0.61
0.88
0.024
0.034
F1
1.14
1.70
0.044
0.067
F2
1.14
1.70
0.044
0.067
G
4.95
5.15
0.194
0.203
G1
2.4
2.7
0.094
0.106
H2
10.0
10.40
0.393
0.409
14.0
0.511
L2
16.4
L4
0.645
13.0
0.551
2.65
2.95
0.104
0.116
L6
15.25
15.75
0.600
0.620
L7
6.2
6.6
0.244
0.260
L9
3.5
3.93
0.137
0.154
DIA.
3.75
3.85
0.147
0.151
D1
C
D
A
E
L5
H2
G
G1
F1
L2
F2
F
Dia.
L5
L9 L7 L6
8/11
L4
P011C
LM117/217/317
TO-220FP MECHANICAL DATA mm
DIM. MIN.
inch
TYP.
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
B
2.5
2.7
0.098
0.106
D
2.5
2.75
0.098
0.108
E
0.45
0.7
0.017
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.7
0.045
0.067
F2
1.15
1.7
0.045
0.067
G
4.95
5.2
0.195
0.204
G1
2.4
2.7
0.094
0.106
H
10
10.4
0.393
0.409
L2
16
L3
0.630
28.6
30.6
1.126
1.204
9.8
10.6
0.385
0.417
L6
15.9
16.4
0.626
0.645
L7
9
9.3
0.354
0.366
Ø
3
3.2
0.118
0.126
B
D
A
E
L4
L3 L6
F
F1
L7
F2
H
G
G1
¯
1 2 3 L2
L4
P011G4/B 9/11
LM117/217/317
TO-263 (D2PAK) MECHANICAL DATA mm
DIM. MIN.
inch
TYP.
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
A1
2.49
2.69
0.098
0.106
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
0.368
E
10
10.4
0.393
0.409
G
4.88
5.28
0.192
0.208
L
15
15.85
0.590
0.624
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
D
C2
A2
A C
DETAIL”A”
DETAIL”A” A1 B2
E
B
G
L2
L
L3 P011P6/F
10/11
LM117/217/317
Information furnished is believed to be accurate and reliable. However, STMicroelectronic s assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life devices or systems withoutexpress written approval of STMicroelectronics. The ST logo is a ed trademark of STMicroelectronics 2000 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - - - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com .
11/11
This datasheet has been from: www.datasheetcatalog.com Datasheets for electronics components.
1.2V TO 37V VOLTAGE REGULATOR ■ ■ ■ ■
■
OUTPUT VOLTAGE RANGE : 1.2 TO 37V OUTPUT CURRENT IN EXCESS OF 1.5A 0.1% LINE AND LOAD REGULATION FLOATING OPERATION FOR HIGH VOLTAGES COMPLETE SERIES OF PROTECTIONS : CURRENT LIMITING, THERMAL SHUTDOWN AND SOA CONTROL
DESCRIPTION The LM117/LM217/LM317 are monolithic integrated circuit in TO-220, TO-220FP, TO-3 and D2PAK packages intended for use as positive adjustable voltage regulators. They are designed to supply more than 1.5A of load current with an output voltage adjustable over a 1.2 to 37V range. The nominal output voltage is selected by means of only a resistive divider, making the device exceptionally easy to use and eliminating the stocking of many fixed regulators.
TO-3
D2PAK
TO-220
TO-220FP
ABSOLUTE MAXIMUM RATING Symbol V i-o
Parameter
Value
Unit
40
V
Input-output Differential Voltage
IO
Output Current
T op
Operating Junction Temperature for: LM117 LM217 LM317
Intenrally Limited
P tot
Power Dissipation
T st g
Storage Temperature
o
-55 to 150 -25 to 150 0 to 125
C C o C o
Internally Limited o
- 65 to 150
C
THERMAL DATA Symbol
Parameter
R thj- ca se Thermal Resistance Junction-case R thj- amb Thermal Resistance Junction-ambient
November 2000
TO-3 Max Max
4 35
TO-220 3 50
TO-220FP 5 60
D2PAK 3 62.5
Unit o o
C/W C/W
1/11
LM117/217/317 CONNECTION DIAGRAM AND ORDERING NUMBERS (top view)
TO-220
TO-220FP
D2PAK
Type
TO-3
LM117
LM117K
LM217
LM217K
LM217T
LM317
LM317K
LM317T
SCHEMATIC DIAGRAM
2/11
TO-3
TO-220
TO-220FP
2
D PAK LM217D2T
LM317P
LM317D2T
LM117/217/317 BASIC ADJUSTABLE REGULATOR
ELECTRICAL CHARACTERISTICS (Vi - Vo = 5 V, Io = 500 mA, IMAX = 1.5A and PMAX = 20W, unless otherwise specified) Symbol
Parameter
Test Conditions
LM117/LM217 Min.
∆V o ∆V o
Line Regulation Load Regulation
Vi - Vo = 3 to 40 V Vo ≤ 5V Io = 10 mA to IMAX
T j = 25 o C o
Max.
LM317 Min.
Unit
Typ.
Max.
0.01
0.02
0.01
0.04
%/V
0.02
0.05
0.02
0.07
%/V
5
15
5
25
mV
20
50
20
70
mV
0.1
0.3
0.1
0.5
%
0.3
1
0.3
1.5
%
Adjustment Pin Current
50
100
50
100
µA
∆I ADJ
Adjustment Pin Current Vi - Vo = 2.5 to 40 V Io = 10 mA to IMAX
0.2
5
0.2
5
µA
V REF
Reference Voltage Vi - Vo = 2.5 to 40 V (between pin 3 and pin Io = 10 mA to IMAX 1) PD ≤ PMAX Output Voltage Temperature Stability
1.25
1.3
1.25
1.3
V
Vo ≥ 5V Io = 10 mA to IMAX I ADJ
∆ Vo Vo I o (m in)
Minimum Load Current Vi - Vo = 40 V
I o (max )
Maximum Load Current
T j = 25 C
Typ.
o
T j = 25 C
1.2
1 3.5
Vi - Vo ≤ 15 V PD < PMAX
1.5
Vi - Vo = 40 V PD < PMAX o Tj = 25 C eN SVR
Output Noise Voltage (percentance of VO)
B = 10Hz to 10KHz Tj = 25 oC
Supply Voltage Rejection (*)
Tj = 25 oC f = 120 Hz
1.2
C ADJ =0 C ADJ =10µF
66
2.2
1 5
3.5
10
mA
2.2
A
0.4
0.4
A
0.003
0.003
%
65
65
dB
80
dB
80
1.5
%
66
(*) CADJ is connected between pin 1 and ground. Note: (1) Unless otherwise specified the above specs, apply over the following conditions : LM 117 Tj = – 55 to 150°C; LM 217 Tj = – 25 to 150°C ; LM 317 Tj = 0 to 125°C.
3/11
LM117/217/317 Figure 1 : Output Current vs. Input-output Differential Voltage.
Figure 2 : Dropout Voltage vs. Junction Temperature.
Figure 3 : Reference Voltage vs. Junction
Figure 4 : Basic Adjustable Regulator.
APPLICATION INFORMATION The LM117/217/317 provides an internal reference voltage of 1.25V between the output and adjustments terminals. This is used to set a constant current flow across an external resistor divider (see fig. 4), giving an output voltage VO of: R2 VO = VREF (1 + ) + IADJ R2 R1 The device was designed to minimize the term IADJ (100µA max) and to maintain it very constant with line and load changes. Usually, the error term IADJ ⋅ R2 can be neglected. To obtain the previous requirement, all the regulator quiescent current is returned to the output terminal, imposing a minimum load current condition. If the load is insufficient, the output voltage will rise. Since the LM117/217317 is a floating regulator and ”sees” only the input-to-output differential 4/11
voltage, supplies of very high voltage with respect to ground can be regulated as long as the maximum input-to-output differential is not exceeded. Furthermore, programmable regulator are easily obtainable and, by connecting a fixed resistor between the adjustment and output, the device can be used as a precision current regulator. In order to optimise the load regulation, the current set resistor R1 (see fig. 4) should be tied as close as possible to the regulator, while the ground terminal of R2 should be near the ground of the load to provide remote ground sensing. Performance may be improved with added capacitance as follow: An input by capacitor of 0.1µF An adjustment terminal to ground 10µF capacitor
LM117/217/317 to improve the ripple rejection of about 15 dB (CADJ). An 1µF tantalium (or 25µFAluminium electrolitic) capacitor on the output to improve transient response. In additional to external capacitors, it is good
practice to add protection diodes, as shown in fig.5. D1 protect the device against input short circuit, while D2 protect against output short circuit for capacitance discharging.
Figure 5 : Voltage Regulator with Protection Diodes.
D1 protect the device against input short circuit, while D2 protects against output short circuit for capacitors discharging
Figure 6 : Slow Turn-on 15V Regulator.
Figure 7 : Current Regulator.
Io =
Vref R1
+ IADJ ≈
1.25V R1
5/11
LM117/217/317 Figure 8 : 5V Electronic Shut-down Regulator
Figure 9 : Digitally Selected Outputs
(R2 sets maximum Vo)
Figure 10 : Battery Charger (12V)
* RS sets output impedance of charger R2 Zo = RS (1 + ) R1 Use of RS allows low charging rates with fully charged battery.
6/11
Figure 11 : Current Limited 6V Charger
* R3 sets peak current (0.6A for 1Ω). ** C1 recommended to filter out input transients.
LM117/217/317
TO-3 (R) MECHANICAL DATA mm
DIM. MIN. A
inch
TYP.
MAX.
MIN.
TYP.
11.7
B
MAX.
0.460
0.96
1.10
0.037
0.043
C
1.70
0.066
D
8.7
0.342
E
20.0
0.787
G
10.9
0.429
N
16.9
0.665
P
26.2
R
3.88
1.031
4.09
U
0.152
39.50
V
1.555
30.10
1.185
A
P
D
C
O
N
B
V
E
G
U
0.161
R
P003N 7/11
LM117/217/317
TO-220 MECHANICAL DATA mm
DIM. MIN.
inch
TYP.
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
C
1.23
1.32
0.048
0.051
D
2.40
2.72
0.094
D1
0.107
1.27
0.050
E
0.49
0.70
0.019
0.027
F
0.61
0.88
0.024
0.034
F1
1.14
1.70
0.044
0.067
F2
1.14
1.70
0.044
0.067
G
4.95
5.15
0.194
0.203
G1
2.4
2.7
0.094
0.106
H2
10.0
10.40
0.393
0.409
14.0
0.511
L2
16.4
L4
0.645
13.0
0.551
2.65
2.95
0.104
0.116
L6
15.25
15.75
0.600
0.620
L7
6.2
6.6
0.244
0.260
L9
3.5
3.93
0.137
0.154
DIA.
3.75
3.85
0.147
0.151
D1
C
D
A
E
L5
H2
G
G1
F1
L2
F2
F
Dia.
L5
L9 L7 L6
8/11
L4
P011C
LM117/217/317
TO-220FP MECHANICAL DATA mm
DIM. MIN.
inch
TYP.
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
B
2.5
2.7
0.098
0.106
D
2.5
2.75
0.098
0.108
E
0.45
0.7
0.017
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.7
0.045
0.067
F2
1.15
1.7
0.045
0.067
G
4.95
5.2
0.195
0.204
G1
2.4
2.7
0.094
0.106
H
10
10.4
0.393
0.409
L2
16
L3
0.630
28.6
30.6
1.126
1.204
9.8
10.6
0.385
0.417
L6
15.9
16.4
0.626
0.645
L7
9
9.3
0.354
0.366
Ø
3
3.2
0.118
0.126
B
D
A
E
L4
L3 L6
F
F1
L7
F2
H
G
G1
¯
1 2 3 L2
L4
P011G4/B 9/11
LM117/217/317
TO-263 (D2PAK) MECHANICAL DATA mm
DIM. MIN.
inch
TYP.
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
A1
2.49
2.69
0.098
0.106
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
0.368
E
10
10.4
0.393
0.409
G
4.88
5.28
0.192
0.208
L
15
15.85
0.590
0.624
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
D
C2
A2
A C
DETAIL”A”
DETAIL”A” A1 B2
E
B
G
L2
L
L3 P011P6/F
10/11
LM117/217/317
Information furnished is believed to be accurate and reliable. However, STMicroelectronic s assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life devices or systems withoutexpress written approval of STMicroelectronics. The ST logo is a ed trademark of STMicroelectronics 2000 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - - - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com .
11/11
This datasheet has been from: www.datasheetcatalog.com Datasheets for electronics components.
Related Documents 2w1qw
Lm317k 381x3b
June 2022 0More Documents from "Souvik Roy Chowdhury" 1f2tq
Lm317k 381x3b
June 2022 0
Eil Tender 6o2t5n
November 2019 158
Ethnic Consumers Consulting Case Study 6m1q5m
May 2020 43
Coca Cola Sales And Distribution 1k2u3h
December 2019 50
Resume Format For Tcs 55na
November 2019 158