Fundamentals Of Relational Database Design -- R937 3k5r4v

5/7/2017

Fundamentals of Relational Database Design r937.com

Home SQL Web Ask the Expert SQL Links SQL Archive

Fundamentals of Relational Database Design September 7, 2003

By Paul Litwin

Overview Database design theory is a topic that many people avoid learning for lack of time. Many others attempt to learn it, but give up because of the dry, academic treatment it is usually given by most authors and teachers. But if creating databases is part of your job, then you're treading on thin ice if you don't have a good solid understanding of relational database design theory.

Paul Litwin is the owner of Litwin Consulting, a Microsoft Solution Provider specializing in programming, consulting, mentoring, and training services in ASP, ASP.NET, VB, SQL Server, XML, and related technologies. This article was adapted by the author from the design chapter of Microsoft Access 2 Developer's Handbook, Sybex 1994, by Ken Getz, Paul Litwin and Greg Reddick, and is reproduced here with permission. Don't let the fact that the examples were done for Access 2 fool you. Relational database design is timeless, and this is a superb article.

This article begins with an introduction to relational database design theory, including a discussion of keys, relationships, integrity rules, and the oftendreaded "Normal Forms." Following the theory, I present a practical stepbystep approach to good database design.

The Relational Model The relational database model was conceived by E. F. Codd in 1969, then a researcher at IBM. The model is based on branches of mathematics called set theory and predicate logic. The basic idea behind the relational model is that a database consists of a series of unordered tables (or relations) that can be manipulated using nonprocedural operations that return tables. This model was in vast contrast to the more traditional database theories of the time that were much more complicated, less flexible and dependent on the physical storage methods of the data. Note: It is commonly thought that the word relational in the relational model comes from the fact that you relate together tables in a relational database. Although this is a convenient way to think of the term, it's not accurate. Instead, the word relational has its roots in the terminology that Codd used to define the relational model. The table in Codd's writings was actually referred to as a relation (a related set of http://r937.com/relational.html

1/23

5/7/2017


information). In fact, Codd (and other relational database theorists) use the relations, attributes and tuples where most of us use the more common tables, columns and rows, respectively (or the more physical—and thus less preferable for discussions of database design theory—files, fields and records). The relational model can be applied to both databases and database management systems (DBMS) themselves. The relational fidelity of database programs can be compared using Codd's 12 rules (since Codd's seminal paper on the relational model, the number of rules has been expanded to 300) for determining how DBMS products conform to the relational model. When compared with other database management programs, Microsoft Access fares quite well in  of relational fidelity. Still, it has a long way to go before it meets all twelve rules completely. Fortunately, you don't have to wait until Microsoft Access is perfect in a relational sense before you can benefit from the relational model. The relational model can also be applied to the design of databases, which is the subject of the remainder of this article.

Relational Database Design When deg a database, you have to make decisions regarding how best to take some system in the real world and model it in a database. This consists of deciding which tables to create, what columns they will contain, as well as the relationships between the tables. While it would be nice if this process was totally intuitive and obvious, or even better automated, this is simply not the case. A welldesigned database takes time and effort to conceive, build and refine. The benefits of a database that has been designed according to the relational model are numerous. Some of them are: Data entry, updates and deletions will be efficient. Data retrieval, summarization and reporting will also be efficient. Since the database follows a wellformulated model, it behaves predictably. Since much of the information is stored in the database rather than in the application, the database is somewhat selfdocumenting. Changes to the database schema are easy to make. The goal of this article is to explain the basic principles behind relational database design and demonstrate how to apply these principles when deg a database using Microsoft Access. This article is by no means comprehensive and certainly not definitive. Many books have been written on database design theory; in fact, many careers have been devoted to its study. Instead, this article is meant as an informal introduction to database design theory for the database developer.

http://r937.com/relational.html

2/23

5/7/2017


Note: While the examples in this article are centered around Microsoft Access databases, the discussion also applies to database development using the Microsoft Visual Basic® programming system, the Microsoft FoxPro® database management system, and the Microsoft SQL Server™ clientserver database management system.

Tables, Uniqueness and Keys Tables in the relational model are used to represent "things" in the real world. Each table should represent only one thing. These things (or entities) can be realworld objects or events. For example, a realworld object might be a customer, an inventory item, or an invoice. Examples of events include patient visits, orders, and telephone calls. Tables are made up of rows and columns. The relational model dictates that each row in a table be unique. If you allow duplicate rows in a table, then there's no way to uniquely address a given row via programming. This creates all sorts of ambiguities and problems that are best avoided. You guarantee uniqueness for a table by designating a primary key—a column that contains unique values for a table. Each table can have only one primary key, even though several columns or combination of columns may contain unique values. All columns (or combination of columns) in a table with unique values are referred to as candidate keys, from which the primary key must be drawn. All other candidate key columns are referred to as alternate keys. Keys can be simple or composite. A simple key is a key made up of one column, whereas a composite key is made up of two or more columns. The decision as to which candidate key is the primary one rests in your hands— there's no absolute rule as to which candidate key is best. Fabian Pascal, in his book SQL and Relational Basics, notes that the decision should be based upon the principles of minimality (choose the fewest columns necessary), stability (choose a key that seldom changes), and simplicity/familiarity (choose a key that is both simple and familiar to s). Let's illustrate with an example. Say that a company has a table of customers called tblCustomer, which looks like the table shown in Figure 1.

Figure 1. The best choice for primary key for tblCustomer would be CustomerId.


3/23

5/7/2017


Candidate keys for tblCustomer might include CustomerId, (LastName + FirstName), Phone#, (Address, City, State), and (Address + ZipCode). Following Pascal's guidelines, you would rule out the last three candidates because addresses and phone numbers can change fairly frequently. The choice among CustomerId and the name composite key is less obvious and would involve tradeoffs. How likely would a customer's name change (e.g., marriages cause names to change)? Will misspelling of names be common? How likely will two customers have the same first and last names? How familiar will CustomerId be to s? There's no right answer, but most developers favor numeric primary keys because names do sometimes change and because searches and sorts of numeric columns are more efficient than of text columns in Microsoft Access (and most other databases). Counter columns in Microsoft Access make good primary keys, especially when you're having trouble coming up with good candidate keys, and no existing arbitrary identification number is already in place. Don't use a counter column if you'll sometimes need to renumber the values—you won't be able to—or if you require an alphanumeric code—Microsoft Access s only long integer counter values. Also, counter columns only make sense for tables on the one side of a onetomany relationship (see the discussion of relationships in the next section). Note: In many situations, it is best to use some sort of arbitrary static whole number (e.g., employee ID, order ID, a counter column, etc.) as a primary key rather than a descriptive text column. This avoids the problem of misspellings and name changes. Also, don't use real numbers as primary keys since they are inexact.

Foreign Keys and Domains Although primary keys are a function of individual tables, if you created databases that consisted of only independent and unrelated tables, you'd have little need for them. Primary keys become essential, however, when you start to create relationships that  together multiple tables in a database. A foreign key is a column in a table used to reference a primary key in another table. Continuing the example presented in the last section, let's say that you choose CustomerId as the primary key for tblCustomer. Now define a second table, tblOrder, as shown in Figure 2.

   Figure 2. CustomerId is a foreign key in tblOrder which can be used to reference a customer stored in the tblCustomer table. http://r937.com/relational.html

4/23

5/7/2017


CustomerId is considered a foreign key in tblOrder since it can be used to refer to given customer (i.e., a row in the tblCustomer table). It is important that both foreign keys and the primary keys that are used to reference share a common meaning and draw their values from the same domain. Domains are simply pools of values from which columns are drawn. For example, CustomerId is of the domain of valid customer ID #'s, which in this case might be Long Integers ranging between 1 and 50,000. Similarly, a column named Sex might be based on a oneletter domain equaling 'M' or 'F'. Domains can be thought of as defined column types whose definition implies certain rules that the columns must follow and certain operations that you can perform on those columns. Microsoft Access s domains only partially. For example, Microsoft Access will not let you create a relationship between two tables using columns that do not share the same datatype (e.g., text, number, date/time, etc.). On the other hand, Microsoft Access will not prevent you from ing the Integer column EmployeeAge from one table to the Integer column YearsWorked from a second table, even though these two columns are obviously from different domains.

Relationships You define foreign keys in a database to model relationships in the real world. Relationships between realworld entities can be quite complex, involving numerous entities each having multiple relationships with each other. For example, a family has multiple relationships between multiple people—all at the same time. In a relational database such as Microsoft Access, however, you consider only relationships between pairs of tables. These tables can be related in one of three different ways: onetoone, onetomany or manytomany. OnetoOne Relationships

Two tables are related in a onetoone (1—1) relationship if, for every row in the first table, there is at most one row in the second table. True onetoone relationships seldom occur in the real world. This type of relationship is often created to get around some limitation of the database management software rather than to model a realworld situation. In Microsoft Access, onetoone relationships may be necessary in a database when you have to split a table into two or more tables because of security or performance concerns or because of the limit of 255 columns per table. For example, you might keep most patient information in tblPatient, but put especially sensitive information (e.g., patient name, social security number and address) in tblConfidential (see Figure 3). Access to the information in tblConfidential could be more restricted than for tblPatient. As a second example, perhaps you need to transfer only a portion of a large table to some other application on a regular basis. You can split the table into the transferred and the nontransferred pieces, and  them in a onetoone relationship.


5/23

5/7/2017


   Figure 3. The tables tblPatient and tblConfidential are related in a onetoone relationship. The primary key of both tables is PatientId. Tables that are related in a onetoone relationship should always have the same primary key, which will serve as the  column. OnetoMany Relationships

Two tables are related in a onetomany (1—M) relationship if for every row in the first table, there can be zero, one, or many rows in the second table, but for every row in the second table there is exactly one row in the first table. For example, each order for a pizza delivery business can have multiple items. Therefore, tblOrder is related to tblOrderDetails in a onetomany relationship (see Figure 4). The oneto many relationship is also referred to as a parentchild or masterdetail relationship. Onetomany relationships are the most commonly modeled relationship.

   Figure 4. There can be many detail lines for each order in the pizza delivery business, so tblOrder and tblOrderDetails are related in a onetomany relationship. Onetomany relationships are also used to link base tables to information stored in lookup tables. For example, tblPatient might have a short oneletter DischargeDiagnosis code, which can be linked to a lookup table, tlkpDiagCode, to get more complete Diagnosis descriptions (stored in DiagnosisName). In this case, http://r937.com/relational.html

6/23

5/7/2017


tlkpDiagCode is related to tblPatient in a onetomany relationship (i.e., one row in the lookup table can be used in zero or more rows in the patient table). ManytoMany Relationships

Two tables are related in a manytomany (M—M) relationship when for every row in the first table, there can be many rows in the second table, and for every row in the second table, there can be many rows in the first table. Manytomany relationships can't be directly modeled in relational database programs, including Microsoft Access. These types of relationships must be broken into multiple onetomany relationships. For example, a patient may be covered by multiple insurance plans and a given insurance company covers multiple patients. Thus, the tblPatient table in a medical database would be related to the tblInsurer table in a manytomany relationship. In order to model the relationship between these two tables, you would create a third, linking table, perhaps called tblPtInsurancePgm that would contain a row for each insurance program under which a patient was covered (see Figure 5). Then, the manytomany relationship between tblPatient and tblInsurer could be broken into two onetomany relationships (tblPatient would be related to tblPtInsurancePgm and tblInsurer would be related to tblPtInsurancePgm in oneto many relationships).

   Figure 5. A linking table, tblPtInsurancePgm, is used to model the manytomany relationship between tblPatient and tblInsurer. In Microsoft Access, you specify relationships using the Edit—Relationships command. In addition, you can create adhoc relationships at any point, using queries.

Normalization As mentioned earlier in this article, when deg databases you are faced with a series of choices. How many tables will there be and what will they represent? Which columns will go in which tables? What will the relationships between the tables be? The answers each to these questions lies in something called normalization. Normalization is the process of simplifying the design of a database so that it achieves the optimum structure.


7/23

5/7/2017


Normalization theory gives us the concept of normal forms to assist in achieving the optimum structure. The normal forms are a linear progression of rules that you apply to your database, with each higher normal form achieving a better, more efficient design. The normal forms are: First Normal Form Second Normal Form Third Normal Form Boyce Codd Normal Form Fourth Normal Form Fifth Normal Form In this article I will discuss normalization through Third Normal Form.

Before First Normal Form: Relations The Normal Forms are based on relations rather than tables. A relation is a special type of table that has the following attributes: 1. They describe one entity. 2. They have no duplicate rows; hence there is always a primary key. 3. The columns are unordered. 4. The rows are unordered. Microsoft Access doesn't require you to define a primary key for each and every table, but it strongly recommends it. Needless to say, the relational model makes this an absolute requirement. In addition, tables in Microsoft Access generally meet attributes 3 and 4. That is, with a few exceptions, the manipulation of tables in Microsoft Access doesn't depend upon a specific ordering of columns or rows. (One notable exception is when you specify the data source for a combo or list box.) For all practical purposes the  table and relation are interchangeable, and I will use the term table in the remainder of this chapter. It's important to note, however, that when I use the term table, I actually mean a table that also meets the definition of a relation.

First Normal Form First Normal Form (1NF) says that all column values must be atomic.

The word atom comes from the Latin atomis, meaning indivisible (or literally "not to cut"). 1NF dictates that, for every rowbycolumn position in a given table, there exists only one value, not an array or list of values. The benefits from this rule should be fairly obvious. If lists of values are stored in a single column, there is no simple way to manipulate those values. Retrieval of data becomes much more


8/23

5/7/2017


laborious and difficult to generalize. For example, the table in Figure 6, tblOrder1, used to store order records for a hardware store, would violate 1NF:

   Figure 6. tblOrder1 violates First Normal Form because the data stored in the Items column is not atomic. You'd have a difficult time retrieving information from this table, because too much information is being stored in the Items field. Think how difficult it would be to create a report that summarized purchases by item. 1NF also prohibits the presence of repeating groups, even if they are stored in composite (multiple) columns. For example, the same table might be improved upon by replacing the single Items column with six columns: Quant1, Item1, Quant2, Item2, Quant3, Item3 (see Figure 7).

Figure 7. A better, but still flawed, version of the Orders table, tblOrder2. The repeating groups of information violate First Normal Form. While this design has divided the information into multiple fields, it's still problematic. For example, how would you go about determining the quantity of hammers ordered by all customers during a particular month? Any query would have to search all three Item columns to determine if a hammer was purchased and then sum over the three quantity columns. Even worse, what if a customer ordered more than three items in a single order? You could always add additional columns, but where would you stop? Ten items, twenty items? Say that you decided that a customer would never order more than twentyfive items in any one order and designed the table accordingly. That means you would be using 50 columns to store the item and http://r937.com/relational.html

9/23

5/7/2017


quantity information per record, even for orders that only involved one or two items. Clearly this is a waste of space. And someday, someone would want to order more than 25 items. Tables in 1NF do not have the problems of tables containing repeating groups. The table in Figure 8, tblOrder3, is 1NF since each column contains one value and there are no repeating groups of columns. In order to attain 1NF, I have added a column, OrderItem#. The primary key of this table is a composite key made up of OrderId and OrderItem#.

   Figure 8. The tblOrder3 table is in First Normal Form. You could now easily construct a query to calculate the number of hammers ordered. The query in Figure 9 is an example of such a query.

   Figure 9. Since tblOrder3 is in First Normal Form, you can easily construct a Totals query to determine the total number of hammers ordered by customers.

Second Normal Form A table is said to be in Second Normal Form (2NF), if it is in 1NF and every nonkey column is fully dependent on the (entire) primary key. http://r937.com/relational.html

10/23

5/7/2017


Put another way, tables should only store data relating to one "thing" (or entity) and that entity should be described by its primary key. The table shown in Figure 10, tblOrder4, is slightly modified version of tblOrder3. Like tblOrder3, tblOrder4 is in First Normal Form. Each column is atomic, and there are no repeating groups.

Figure 10. The tblOrder4 table is in First Normal Form. Its primary key is a composite of OrderId and OrderItem#. To determine if tblOrder4 meets 2NF, you must first note its primary key. The primary key is a composite of OrderId and OrderItem#. Thus, in order to be 2NF, each non key column (i.e., every column other than OrderId and OrderItem#) must be fully dependent on the primary key. In other words, does the value of OrderId and OrderItem# for a given record imply the value of every other column in the table? The answer is no. Given the OrderId, you know the customer and date of the order, without having to know the OrderItem#. Thus, these two columns are not dependent on the entire primary key which is composed of both OrderId and OrderItem#. For this reason tblOrder4 is not 2NF. You can achieve Second Normal Form by breaking tblOrder4 into two tables. The process of breaking a nonnormalized table into its normalized parts is called decomposition. Since tblOrder4 has a composite primary key, the decomposition process is straightforward. Simply put everything that applies to each order in one table and everything that applies to each order item in a second table. The two decomposed tables, tblOrder and tblOrderDetail, are shown in Figure 11.


11/23

5/7/2017




   Figure 11. The tblOrder and tblOrderDetail tables satisfy Second Normal Form. OrderId is a foreign key in tblOrderDetail that you can use to re the tables. Two points are worth noting here. When normalizing, you don't throw away information. In fact, this form of decomposition is termed nonloss decomposition because no information is sacrificed to the normalization process. You decompose the tables in such a way as to allow them to be put back together again using queries. Thus, it's important to make sure that tblOrderDetail contains a foreign key to tblOrder. The foreign key in this case is OrderId which appears in both tables.

Third Normal Form A table is said to be in Third Normal Form (3NF), if it is in 2NF and if all nonkey columns are mutually independent.

An obvious example of a dependency is a calculated column. For example, if a table contains the columns Quantity and PerItemCost, you could opt to calculate and store in that same table a TotalCost column (which would be equal to Quantity*PerItemCost), but this table wouldn't be 3NF. It's better to leave this column out of the table and make the calculation in a query or on a form or a report instead. This saves room in the database and avoids having to update TotalCost, every time Quantity or PerItemCost changes. Dependencies that aren't the result of calculations can also exist in a table. The tblOrderDetail table from Figure 11, for example, is in 2NF because all of its nonkey columns (Quantity, ProductId and ProductDescription) are fully dependent on the http://r937.com/relational.html

12/23

5/7/2017


primary key. That is, given an OderID and an OrderItem#, you know the values of Quantity, ProductId and ProductDescription. Unfortunately, tblOrderDetail also contains a dependency among two if its nonkey columns, ProductId and ProductDescription. Dependencies cause problems when you add, update, or delete records. For example, say you need to add 100 detail records, each of which involves the purchase of screwdrivers. This means you would have to input a ProductId code of 2 and a ProductDescription of "screwdriver" for each of these 100 records. Clearly this is redundant. Similarly, if you decide to change the description of the item to "No. 2 Phillipshead screwdriver" at some later time, you will have to update all 100 records. Another problem arises when you wish to delete all of the 1994 screwdriver purchase records at the end of the year. Once all of the records are deleted, you will no longer know what ProductId of 2 is, since you've deleted from the database both the history of purchases and the fact that ProductId 2 means "No. 2 Phillipshead screwdriver." You can remedy each of these anomalies by further normalizing the database to achieve Third Normal Form. Note: An Anomaly is simply an error or inconsistency in the database. A poorly designed database runs the risk of introducing numerous anomalies. There are three types of anomalies: Insertion: an anomaly that occurs during the insertion of a record. For example, the insertion of a new row causes a calculated total field stored in another table to report the wrong total. Deletion: an anomaly that occurs during the deletion of a record. For example, the deletion of a row in the database deletes more information than you wished to delete. Update: an anomaly that occurs during the updating of a record. For example, updating a description column for a single part in an inventory database requires you to make a change to thousands of rows. The tblOrderDetail table can be further decomposed to achieve 3NF by breaking out the ProductId—ProductDescription dependency into a lookup table as shown in Figure 12. This gives you a new order detail table, tblOrderDetail1 and a lookup table, tblProduct. When decomposing tblOrderDetail, take care to put a copy of the linking column, in this case ProductId, in both tables. ProductId becomes the primary key of the new table, tblProduct, and becomes a foreign key column in tblOrderDetail1. This allows you to easily  together the two tables using a query.


13/23

5/7/2017




   Figure 12. The tbOrderDetail1 and tblProduct tables are in Third Normal Form. The ProductId column in tblOrderDetail1 is a foreign key referencing tblProduct.

Higher Normal Forms After Codd defined the original set of normal forms it was discovered that Third Normal Form, as originally defined, had certain inadequacies. This led to several higher normal forms, including the Boyce/Codd, Fourth and Fifth Normal Forms. I will not be covering these higher normal forms, instead, several points are worth noting here: Every higher normal form is a superset of all lower forms. Thus, if your design is in Third Normal Form, by definition it is also in 1NF and 2NF. If you've normalized your database to 3NF, you've likely also achieved Boyce/Codd Normal Form (and maybe even 4NF or 5NF). To quote C.J. Date, the principles of database design are "nothing more than formalized common sense." Database design is more art than science. This last item needs to be emphasized. While it's relatively easy to work through the examples in this article, the process gets more difficult when you are presented with a business problem (or another scenario) that needs to be computerized (or downsized). I have outlined an approach to take later in this article, but first the subject of integrity rules will be discussed.

Integrity Rules http://r937.com/relational.html

14/23

5/7/2017


The relational model defines several integrity rules that, while not part of the definition of the Normal Forms are nonetheless a necessary part of any relational database. There are two types of integrity rules: general and databasespecific.

General Integrity Rules The relational model specifies two general integrity rules. They are referred to as general rules, because they apply to all databases. They are: entity integrity and referential integrity. The entity integrity rule is very simple. It says that primary keys cannot contain null (missing) data. The reason for this rule should be obvious. You can't uniquely identify or reference a row in a table, if the primary key of that table can be null. It's important to note that this rule applies to both simple and composite keys. For composite keys, none of the individual columns can be null. Fortunately, Microsoft Access automatically enforces the entity integrity rule for you. No component of a primary key in Microsoft Access can be null. The referential integrity rule says that the database must not contain any unmatched foreign key values. This implies that: A row may not be added to a table with a foreign key unless the referenced value exists in the referenced table. If the value in a table that's referenced by a foreign key is changed (or the entire row is deleted), the rows in the table with the foreign key must not be "orphaned." In general, there are three options available when a referenced primary key value changes or a row is deleted. The options are: Disallow. The change is completely disallowed. Cascade. For updates, the change is cascaded to all dependent tables. For deletions, the rows in all dependent tables are deleted. Nullify. For deletions, the dependent foreign key values are set to Null. Microsoft Access allows you to disallow or cascade referential integrity updates and deletions using the Edit | Relationships command (see Figure 13). Nullify is not an option.


15/23

5/7/2017


   Figure 13. Specifying a relationship with referential integrity between the tblCustomer and tblOrder tables using the Edit | Relationships command. Updates of CustomerId in tblCustomer will be cascaded to tblOrder. Deletions of rows in tblCustomer will be disallowed if rows in tblOrders would be orphaned. Note: When you wish to implement referential integrity in Microsoft Access, you must perform one additional step outside of the Edit | Relationships dialog: in table design, you must set the Required property for the foreign key column to Yes. Otherwise, Microsoft Access will allow your s to enter a Null foreign key value, thus violating strict referential integrity.

DatabaseSpecific Integrity Rules All integrity constraints that do not fall under entity integrity or referential integrity are termed databasespecific rules or business rules. These type of rules are specific to each database and come from the rules of the business being modeled by the database. It is important to note that the enforcement of business rules is as important as the enforcement of the general integrity rules discussed in the previous section. Note: Rules in Microsoft Access 2.0 are now enforced at the engine level, which means that forms, action queries and table imports can no longer ignore your rules. Because of this change, however, column rules can no longer reference other columns or use domain, aggregate, or defined functions. Without the specification and enforcement of business rules, bad data will get in the database. The old adage, "garbage in, garbage out" applies aptly to the application (or lack of application) of business rules. For example, a pizza delivery business might have the following rules that would need to be modeled in the database: http://r937.com/relational.html

16/23

5/7/2017


Order date must always be between the date the business started and the current date. Order time and delivery time can be only during business hours. Delivery time must be greater than or equal to Order time. New orders cannot be created for discontinued menu items. Customer zip codes must be within a certain range—the delivery area. The quantity ordered can never be less than 1 or greater than 50. Nonnull discounts can never be less than 1 percent or greater than 30 percent. Microsoft Access 2.0 s the specification of validation rules for each column in a table. For example, the first business rule from the above list has been specified in Figure 14.

   Figure 14. A column validation rule has been created to limit all order dates to some time between the first operating day of the business (5/3/93) and the current date. Microsoft Access 2.0 also s the specification of a global rule that applies to the entire table. This is useful for creating rules that crossreference columns as the example in Figure 15 demonstrates. Unfortunately, you're only allowed to create one global rule per table, which could make for some awful validation error messages (e.g., "You have violated one of the following rules: 1. Delivery Date > Order Date. 2. Delivery Time > Order Time...."). http://r937.com/relational.html

17/23

5/7/2017


   Figure 15. A table validation rule has been created to require that deliveries be made on or after the date the pizza was ordered. Although Microsoft Access businessrule  is better than most other desktop DBMS programs, it is still limited (especially the limitation of one global table rule), so you will typically build additional business rule logic into applications, usually in the data entry forms. This logic should be layered on top of any tablebased rules and can be built into the application using combo boxes, listboxes and option groups that limit available choices, formlevel and fieldlevel validation rules, and event procedures. These applicationbased rules, however, should be used only when the tablebased rules cannot do the job. The more you can build business rules in at the table level, the better, because these rules will always be enforced and will require less maintenance.

A Practical Approach to Database Design As mentioned earlier in this article, database design is more art than science. While it's true that a properly designed database should follow the normal forms and the relational model, you still have to come up with a design that reflects the business you are trying to model. Relational database design theory can usually tell you what not to do, but it won't tell you where to start or how to manage your business. This is where it helps to understand the business (or other scenario) you are trying to model. A welldesigned database requires business insight, time, and experience. Above all, it shouldn't be rushed. To assist you in the creation of databases, I've outlined the following 20step approach to sound database design: 1. Take some time to learn the business (or other system) you are trying to model. This will usually involve sitting down and meeting with the people who http://r937.com/relational.html

18/23

5/7/2017


will be using the system and asking them lots of questions. 2. On paper, write out a basic mission statement for the system. For example, you might write something like "This system will be used to take orders from customers and track orders for ing and inventory purposes." In addition, list out the requirements of the system. These requirements will guide you in creating the database schema and business rules. For example, create a list that includes entries such as "Must be able to track customer address for subsequent direct mail." 3. Start to rough out (on paper) the data entry forms. (If rules come to mind as you lay out the tables, add them to the list of requirements outlined in step 2.) The specific approach you take will be guided by the state of any existing system. If this system was never before computerized, take the existing paper based system and rough out the table design based on these forms. It's very likely that these forms will be nonnormalized. If the database will be converted from an existing computerized system, use its tables as a starting point. , however, that it's very likely that the existing schema will be nonnormalized. It's much easier to normalize the database now rather than later. Print out the existing schema, table by table, and the existing data entry forms to use in the design process. If you are really starting from scratch (e.g., for a brand new business), then rough out on paper what forms you envision filling out. 4. Based on the forms, you created in step 3, rough out your tables on paper. If normalization doesn't come naturally (or from experience), you can start by creating one huge, nonnormalized table per form that you will later normalize. If you're comfortable with normalization theory, try and keep it in mind as you create your tables, ing that each table should describe a single entity. 5. Look at your existing paper or computerized reports. (If you're starting from scratch, rough out the types of reports you'd like to see on paper.) For existing systems that aren't currently meeting the  needs, it's likely that key reports are missing. Create them now on paper. 6. Take the roughedout reports from step 5 and make sure that the tables from step 4 include this data. If information is not being collected, add it to the existing tables or create new ones. 7. On paper, add several rows to each roughedout table. Use real data if at all possible.


19/23

5/7/2017


8. Start the normalization process. First, identify candidate keys for every table and using the candidates, choose the primary key.  to choose a primary key that is minimal, stable, simple, and familiar. Every table must have a primary key! Make sure that the primary key will guard against all present and future duplicate entries. 9. Note foreign keys, adding them if necessary to related tables. Draw relationships between the tables, noting if they are onetoone or onetomany. If they are manytomany, then create linking tables. 10. Determine whether the tables are in First Normal Form. Are all fields atomic? Are there any repeating groups? Decompose if necessary to meet 1NF. 11. Determine whether the tables are in Second Normal Form. Does each table describe a single entity? Are all nonkey columns fully dependent on the primary key? Put another way, does the primary key imply all of the other columns in each table? Decompose to meet 2NF. If the table has a composite primary key, then the decomposition should, in general, be guided by breaking the key apart and putting all columns pertaining to each component of the primary key in their own tables. 12. Determine if the tables are in Third Normal Form. Are there any computed columns? Are there any mutually dependent nonkey columns? Remove computed columns. Eliminate mutual dependent columns by breaking out lookup tables. 13. Using the normalized tables from step 12, refine the relationships between the tables. 14. Create the tables using Microsoft Access (or whatever database program you are using). If using Microsoft Access, create the relationships between the tables using the Edit | Relationships command. Add sample data to the tables. 15. Create prototype queries, forms, and reports. While creating these objects, design deficiencies should become obvious. Refine the design as needed. 16. Bring the s back in. Have them evaluate your forms and reports. Are their needs met? If not, refine the design.  to renormalize if necessary (steps 812). 17. Go back to the table design screen and add business rules. 18. Create the final forms, reports, and queries. Develop the application. Refine the design as necessary. 19. Have the s test the system. Refine the design as needed. 20. Deliver the final system. http://r937.com/relational.html

20/23

5/7/2017


This list doesn't cover every facet of the design process, but it's useful as a framework for the process.

Breaking the Rules: When to Denormalize Sometimes it's necessary to break the rules of normalization and create a database that is deliberately less normal than it otherwise could be. You'll usually do this for performance reasons or because the s of the database demand it. While this won't get you any points with database design purists, ultimately you have to deliver a solution that satisfies your s. If you do break the rules, however, and decide to denormalize you database, it's important that you follow these guidelines: Break the rules deliberately; have a good reason for denormalizing. Be fully aware of the tradeoffs this decision entails. Thoroughly document this decision. Create the necessary application adjustments to avoid anomalies. This last point is worth elaborating on. In most cases, when you denormalize, you will be required to create additional application code to avoid insertion, update, and deletion anomalies that a more normalized design would avoid. For example, if you decide to store a calculation in a table, you'll need to create extra event procedure code and attach it to the appropriate event properties of forms that are used to update the data on which the calculation is based. If you're considering denormalizing for performance reasons, don't always assume that the denormalized approach is the best. Instead, I suggest you first fully normalize the database (to Third Normal Form or higher) and then denormalize only if it becomes necessary for reasons of performance. If you're considering denormalizing because your s think they need it, investigate why. Often they will be concerned about simplifying data entry, which you can usually accomplish by basing forms on queries while keeping your base tables fully normalized. Here are several scenarios where you might choose to break the rules of normalization: You decide to store an indexed computed column, Soundex, in tblCustomer to improve query performance, in violation of 3NF (because Soundex is dependent on LastName). The Soundex column contains the soundalike code for the LastName column. It's an indexed column (with duplicates allowed) and is calculated using a defined function. If you wish to perform searches on the Soundex column with any but the smallest tables, you'll find a significant performance advantage to storing the Soundex column in the table and indexing this computed column. You'd likely use an event procedure attached to a form to perform the Soundex calculation and store the result in the http://r937.com/relational.html

21/23

5/7/2017


Soundex column. To avoid update anomalies, you'll want to ensure that this column cannot be updated by the  and that it is updated every time LastName changes. In order to improve report performance, you decide to create a column named TotalOrderCost that contains a sum of the cost of each order item in tblOrder. This violates 2NF because TotalOrderCost is dependent on the primary key of tblOrderDetail, not on tblOrder's primary key. TotalOrderCost is calculated on a form by summing the column TotalCost for each item. Since you often create reports that need to include the total order cost, but not the cost of individual items, you've broken 2NF to avoid having to  these two tables every time this report needs to be generated. As in the last example, you have to be careful to avoid update anomalies. Whenever a record in tblOrderDetail is inserted, updated, or deleted, you will need to update tblOrder, or the information stored there will be erroneous. You decide to include a column, SalesPerson, in the tblInvoice table, even though SalesId is also included in tblInvoice. This violates 3NF because the two nonkey columns are mutually dependent, but it significantly improves the performance of certain commonly run reports. Once again, this is done to avoid a  to the tblEmployee table, but introduces redundancies and adds the risk of update anomalies.

Summary This article has covered the basics of database design in the context of Microsoft Access. The main concepts covered were: The relational database model was created by E.F. Codd in 1969 and is founded on set theory and logic. A database designed according to the relational model will be efficient, predictable, well performing, selfdocumenting and easy to modify. Every table must have a primary key, which uniquely identifies rows in the table. Foreign keys are columns used to reference a primary key in another table. You can establish three kinds of relationships between tables in a relational database: onetoone, onetomany or manytomany. Manytomany relationships require a linking table. Normalization is the process of simplifying the design of a database so that it achieves the optimum structure. A welldesigned database follows the Normal Forms. The entity integrity rule forbids nulls in primary key columns. http://r937.com/relational.html

22/23

5/7/2017


The referential integrity rule says that the database must not contain any unmatched foreign key values. Business rules are an important part of database integrity. A welldesigned database requires business insight, time, and experience. Occasionally, you made need to denormalize for performance. Database design is an important component of application design. If you take the time to design your databases properly, you'll be rewarded with a solid application foundation on which you can build the rest of your application.

http://r937.com/relational.html   Copyright © 20032011   Rudy Limeback.

Home About Services Site Map


23/23

Fundamentals Of Relational Database Design -- R937 3k5r4v

Overview 1s532p

More details 6h715l

Related Documents 2w1qw

Fundamentals Of Relational Database Design -- R937 3k5r4v

Relational Database Design 6t3s42

3.relational Database Model t1g4m

Phases Of Database Design 4z5r5c

Fundamentals Of Mechanical Design 6s136c

Fundamentals Of Game Design 4o621y

More Documents from "Stuart" 6min

Calculus For Dummies Cheat Sheet - For Dummies 4o4c4b

Evaluation And Measurement In Education Pdf h5g2f

Fundamentals Of Relational Database Design -- R937 3k5r4v

Look Inside The Devos Family Office - Wsj 2i715n

Make An Avg-max-min Chart In Microsoft Excel 686k2y

Digital Booklet - (whats The Story).pdf c1y6m