Cryogenic Welding 1s553j

Cryogenic Pipe s About MAINEPORT Limited We are an engineering company experienced in manufacturing and marketing products and services for U.K. and international projects in the energy and process industries. Our purpose is to satisfy client needs for engineered products delivered to project requirements, working closely with our clients to create supply options which their project objectives. Our clients are international designers and owners of utilities and process plant, including the major oil companies and petrochemical contractors.

Product Range Pipe s Cold / Cryogenic Insulated Acoustic Insulated Hot Insulated Fabricated s Spring s PTFE Sliders

Pipework Technology Pipe Spooling Lined / Coated Pipe Systems Manifolds and Headers Weld Overlay Heating / Cooling Coils Strainers

Bulk Piping Material Thermal Insulation Insulation Cladding, Mastics, Sealants and Adhesives Flanges, Blinds and Spacers Butt-Weld, Fabricated and Forged Fittings Anchor Bolts and Fasteners Gaskets and Bolting

Modular Plant Technology Pre-assembled Units (PAU) Pre-assembled Racks (PAR) Ducting and Bellows Assemblies Secondary Steelwork Chutes and Hoppers Tanks

Note We have endeavoured in this catalogue to make the information as accurate as possible, but we cannot accept any responsibility should it be found that in any respect the information is inaccurate or incomplete or becomes so as a result of further developments.

1

Cryogenic Pipe s Contents Page 3

Introduction Section 1

Fully Insulated Pipe s

4

SIPStm Pipe s Hangers Sliders Guides Guides (heavy duty) Line Stops Anchors Section 2

Cold Break Pipe s Insulated Guides and Clamps Moulded Pipe Shoe Insulated Base Plate / Attachment Pipe Clamps Pipe Trunnions Clamped Pipe Shoes 40-200 NB Clamped Pipe Shoes 250-600 NB Pipe Anchors 40-200 NB Pipe Anchors 250-600 NB Material Data UNITHERM 1000

24

Section 3

PTFE Slider Plate Assemblies

37

2

Cryogenic Pipe s Introduction MAINEPORT manufactures two ranges of Cryogenic Pipe s, incorporating advanced technology in low temperature material applications. 1.

Fully Insulated Pipe s; - developed for continuous low temperature service using cellular foam and laminated materials to give a high compressive strength with low thermal conductivity. Service range: -196°C to +135°C.

2.

Cold Break Pipe s; - developed for piping in intermittent service incorporating ‘UNITHERM 1000’ glass reinforced phenolic laminate. Service range: -196°C to 200°C.

3

Cryogenic Pipe s SECTION 1. Fully Insulated Pipe s Type range MAINEPORT manufacture a complete range of pre-insulated types: Sliders Guides Line Stops Anchors Hangers Standard sizes available range from 15NB pipe to 600 NB pipe with insulation thickness up to 200mm. Design features • • • • • • • •

The s incorporate closed cellular foam with vapour barriers to eliminate moisture ingress. Safe working loads are based on a minimum factor of safety of 5. The diameters of the high density foam are the same as the insulation on the line pipe. s are fully pre-assembled for ease of installation. Design can be customised to meet client specifications, loading and size requirements. Condensation potential is minimised giving longer system. service life. multi layer insulation can be provided. (see table 14 for standard section sizes). sound transmission may be reduced by use of acoustic material bonded directly to plate.

4

Cryogenic Pipe s UNITHERM 4000 PU - Rigid Polyurethane Foam Description Unitherm 4000 PU is a rigid, high density, closed cell polyurethane foam specifically formulated to meet the demands of cryogenic pipe applications. o The foam is manufactured in individual 180 moulds designed to meet the close dimensional tolerances of standard specifications such as ASTM C585-90 whilst providing an high quality surface and skin definition not achieved with cut products.

Combined with high integrity mould design and a state-of-the-art environmentally friendly manufacturing processes Unitherm PUF offers a high quality, V-O rated flame retardant foam available in densities from 160kg/m³ to 500kg/m³. The in-house PUF manufacturing facility provides end-s with access to a one-stop-shop for the design and manufacture of cryogenic pipe-s where ease of fitting on-site is important. Typical Applications Unitherm PUF is monolithically moulded in half-shells for cradle type designs or in rectangular blocks as thermal break for use in cryogenic pipe applications. Technical specification Thermal conductivity @ @ @ Water absorption % @ Flexural strength @ Flexural modulus Compressive @ @ @ Flammability UL-94 Thermal Operating Ozone depletion

25°C -60°C -160°C 25°C 25°C 25°C -60°C -196°C

160 225 320 0.030 0.036 0.049 0.026 0.032 0.046 0.020 0.024 0.035 6.1 5.2 3.2 2.9 4.9 7.8 75 129 227 2.3 4.1 8.4 3.68 6.29 12.79 4.54 10.13 16.91 V-O V-O V-O -196°C to + 120°C Zero Zero Zero

Quality Assurance All performance data has been derived from independent laboratory tests conducted by a recognized cryogenic research establishment and the results witnessed by Lloyd’s and MAINEPORT Industries Ltd. MAINEPORT operates a quality assurance system which complies with the requirements of BS EN ISO 9001:1994 5

Cryogenic Pipe s

SIPS 

PIPE S

Description SIPS (segmented, insulated pipe shoes) are rigid, high density, closed cell foam segments specifically formulated to meet the demands of insulated pipe applications. The foam is manufactured in 60º moulded segments designed to meet the dimensional tolerances of standard specifications such as ASTM C585-90 providing an high performance economic solution for the of insulated pipe systems. The integral mould design and state-of-the-art manufacturing processes offer high quality, V-O rated flame retardant foams available in advanced composite materials ranging from 500 to 800 kg/m³ density. The in-house manufacturing facility provides end-s with access to a one-stop shop for the design and manufacture of insulated pipe s for either hot or cold systems. The shoe is supplied complete with adhesive for bonding to the pipe – simply remove the foil. See Data Sheet on next page for dimensions and loads. Options Additional shoes can be positioned to the side or above the pipe to accommodate lateral or uplift loads. PTFE sheet can be bonded to the base to reduce friction. Special configurations for line stops and anchors are available. Low Density Pipe Insulation Pipe

High Density Pipe Segment

Integral Stainless Steel Mould

Optional Guide

6

Cryogenic Pipe s

SIPS  Low Density Line Insulation

PIPE S

t max Notes HD Foam density 500 kg/m3 min: allowable comp.load 1.35 MPa Bottom plate: 1.5 mm thk 304ss for 0.5" to 4" NB, 3mm thk for over 4" NB to be bonded to pipe per approved procedure 2" to 8"NB

Pipe C/L

0.5" to 1.5"NB

BOP H2 High Density Segment TOS Min. steel width up to 3" 50mm 4" to 8" 75mm 10"& above 100mm

H1

H2

B

H1

A 10"NB and above

Pipe dia " Pipe OD Max Load kg 0.5 21 74 0.75 27 95 1 33 117 1.50 48 170 2 60 212 3 89 315 4 114 604 6 168 891 8 219 1161 10 273 2855 12 324 3200 14 356 3416 16 407 3760 18 457 4097 20 508 4509 24 610 5198 30 762 6291 32 813 6635 36 914 7317

H1 75 75 75 80 85 85 90 95 95 110 110 110 110 110 110 110 110 110 110

Bottom Plate

H2 86 89 92 104 115 130 147 179 205 247 272 288 314 339 364 415 491 517 567

'A' Range tmax Width A Height B 50 50 50 55 60 60 65 70 70 75 212 45 75 237 45 75 253 45 75 279 45 75 304 45 80 334 41 80 385 41 85 466 36 85 492 36 85 542 36

H1 95 100 105 110 115 120 125 130 135 150 150 150 150 150 150 155 175 175 175

H2 106 114 122 134 145 165 182 214 245 287 312 328 354 379 404 460 556 582 632

'B' Range tmax Width A Height B 70 75 80 85 90 95 100 105 110 115 252 50 120 282 46 120 298 46 125 329 42 125 354 42 125 379 42 130 435 42 150 531 45 150 557 45 150 607 45

H1 110 115 120 130 135 140 150 160 165 180 180 180 180 190 190 190 225 225 225

H2 121 129 137 154 165 185 207 244 275 317 342 358 384 419 444 495 606 632 682

'C' Range tmax Width A Height B 105 105 105 120 120 135 140 155 165 150 287 50 150 312 50 150 328 50 150 354 50 185 414 30 185 439 30 185 490 30 225 606 30 225 632 30 225 682 30

7

Cryogenic Pipe s Optional PTFE Slide Plates Where the co-efficient of friction is required to be limited to 0.10 the can be supplied with a PTFE pad bonded directly to the underside of the shoe and with one loose PTFE slider plate to be fitted to ing steel. (See Section 3 for PTFE Slider Plate Assemblies) Fabrication The pre-insulated s are provided with sufficient insulation extending beyond the the outer metal jacket so that the pipe insulation contractor can make a standard insulation butt t. The shoe and metal jacket may be fabricated from either:Stainless steel type A240 grade 316L (16 cr - 12Ni - 2 Mo) Carbon steel (available also in hot dipped galvanised finish) Material used in welded pipe attachments should be compatible with the pipe material. Where required, Guides are supplied from structural quality carbon steels, unless otherwise specified. To order specify: - Part number - Pipe size - Vertical load - Rotational forces and movements - Outside ambient temperatures

- Insulation thickness - Axial and lateral loads - Operating temperature - Pipe wall thickness and material

Foam Cradles Cradles from high density polyurethane foam are supplied with the following properties. The density is selected to suit the load bearing requirements of the .

8

Cryogenic Pipe s Hanger Type

TABLE 1 PIPE SIZE 15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600

SAFE WORKING LOAD (kN) 2.2 2.7 3.4 4.9 6.2 9.2 11.8 17.4 22.6 29.9 35.4 38.9 44.5 44.5 50.0 50.0

BOLT DIAM M10 M10 M12 M12 M16 M16 M20 M24 M24 M30 M30 M30 M36 M36 M40 M40

EYE ROD 10 10 10 12 16 16 20 20 22 22 30 30 36 36 36 36

LAGGING O/D MIN MAX 75 425 80 430 86 436 101 451 114 464 142 492 168 518 220 570 272 622 326 676 377 727 408 758 460 810 510 860 560 910 662 1012

9

Cryogenic Pipe s Cold Sliders

DIMENSIONS LAGGING O/DIA TYPE A B H L S W X1

TABLE 2

75265

270370

CSS-1

375400

425500

500750

CSS-2

775850

8501100

CSS-3

300 A/2+53 260 50 100

300 A/2+53 260 50 150

340 A/2+53 300 50 150

340 A/2+53 300 50 250

340 A/2+56 300 50 300

440 A/2+56 400 50 400

440 A/2+56 400 50 450

-

-

-

-

380

500

600

10

Cryogenic Pipe s Cold Sliders COLD S SLIDERS TABLE FOR LAGGING OUTSIDE DIAMS (A)

TABLE 3 incl. st.st. jacket 1.6 mm

PIPE SIZE

PIPE O/DIA

SAFE WORKIN G LOADS (kN)

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600

21.36 26.67 33.40 48.26 60.33 88.90 114.30 168.28 219.08 273.05 323.85 355.6 406.4 457.2 508.0 609.6

2.2 2.7 3.4 4.9 6.2 9.2 11.8 17.4 22.6 50.0 59.3 65.1 74.4 83.7 85.2 101.8

COLD INSULATION THICKNESS 25

40

50

80

100

130

150

180

200

75 80 86 101 114 142 168 220 272 326 377 408 460 510 560 662

105 110 116 131 144 172 198 250 302 356 407 438 490 540 590 692

125 130 136 151 164 192 218 270 322 376 427 458 510 560 610 712

185 190 196 211 224 252 278 330 382 436 487 518 570 620 670 772

225 230 236 251 264 292 318 370 422 476 527 558 610 660 710 812

285 290 296 311 324 352 378 430 482 536 587 618 670 720 770 872

325 330 336 351 364 392 418 470 522 576 627 658 710 760 810 912

385 390 396 411 424 452 478 530 582 636 687 718 770 820 870 972

425 430 436 451 464 492 518 570 622 676 727 758 810 860 910 1012

11

Cryogenic Pipe s Cold Guides

- can be supplied with guide angles DIMENSIONS

TABLE 4

LAGGING O/DIA TYPE A B H L S W

340 A/2+53 300 50 100

340 A/2+53 300 50 100

340 A/2+53 300 50 150

340 A/2+53 300 50 200

440 A/2+56 400 50 250

440 A/2+56 400 50 300

440 A/2+56 400 50 400

440 A/2+56 400 50 450

X1 Y

150

140 150

250

300

360

450 415

500 500

600 570

75100

100265

270370

375400

425500

500750

CSG-1

775850

8501100

CSG-2

12

Cryogenic Pipe s COLD S GUIDES TABLE FOR LAGGING OUTSIDE DIAMS (A) PIPE SIZE

PIPE O/DIA

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600

21.36 26.67 33.40 48.26 60.33 88.90 114.30 168.28 219.08 273.05 323.85 355.6 406.4 457.2 508.0 609.6

SAFE WORKING LOADS (kN)

TABLE 5 (incl. st.st. jacket 1.6 mm)

COLD INSULATION THICKNESS

VERT

HOR

25

40

50

80

100

130

150

180

200

2.2 2.7 3.4 4.9 6.2 9.2 11.8 17.4 22.6 50.0 59.3 65.1 74.4 83.7 85.2 101.8

2.2 2.4 2.4 2.4 5.5 5.5 5.5 8.9 8.9 9.9 23.7 25.9 29.7 29.7 30.3 35.2

75 80 86 101 114 142 168 220 272 326 377 408 460 510 560 662

105 110 116 131 144 172 198 250 302 356 407 438 490 540 590 692

125 130 136 151 164 192 218 270 322 376 427 458 510 560 610 712

185 190 196 211 224 252 278 330 382 436 487 518 570 620 670 772

225 230 236 251 264 292 318 370 422 476 527 558 610 660 710 812

285 290 296 311 324 352 378 430 482 536 587 618 670 720 770 872

325 330 336 351 364 392 418 470 522 576 627 658 710 760 810 912

385 390 396 411 424 452 478 530 582 636 687 718 770 820 870 972

425 430 436 451 464 492 518 570 622 676 727 758 810 860 910 1012

13

Cryogenic Pipe s Cold Guides (FRAME)

TYPE CSG-4

- Can be supplied with structural restraints

DIMENSIONS (TYPE CSG – 3 and CSG – 4) LAGGING 75100 100265 O/DIA TYPE A B 340 340 H A/2+53 A/2+53 L 300 300 S 50 50 W 100 100

270370

375400

405500

TABLE 6 505750

CSG-3

775850

8501100

CSG-4

340 A/2+53 300 50 150

340 A/2+53 300 50 200

440 A/2+56 400 50 250

440 A/2+56 400 50 300

440 A/2+56 400 50 400

440 A/2+56 400 50 450

400x3 PL A + 62 H + 75 450 415

400x3 PL A + 62 H + 75 500 500

400x3 PL A + 76 H + 75 600 570

P x t PL V Ht X1 Y

260x3 PL A + 56 H + 50 150

260x3 PL A + 56 H + 50 140 150

300x3 PL A + 56 H + 75 250

300x3 PL A + 56 H + 75 300

400x3 PL A + 62 H + 75 360

FRAME MEMBER

RSA 65 X 50

RSC 76 X 51

RSC 127 X 64

RSC 152 X 76

RSC 152 x 89 or 127 x 114J

152 X 127 RSJ

14

Cryogenic Pipe s COLD S GUIDES (heavy duty) TABLE FOR LAGGING OUTSIDE DIAMS (A) PIPE SIZE

PIPE O/DIA

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600

21.36 26.67 33.40 48.26 60.33 88.90 114.30 168.28 219.08 273.05 323.85 355.6 406.4 457.2 508.0 609.6

SAFE WORKING LOADS (kN)

TABLE 7 (incl. jacket)

COLD INSULATION THICKNESS

VERT

HOR

25

40

50

80

100

130

150

180

200

2.2 2.7 3.4 4.9 6.2 9.2 11.8 17.4 22.6 50.0 59.3 65.1 74.4 83.7 85.2 101.8

2.2 2.7 3.4 4.9 6.2 9.2 11.8 17.4 22.6 50.0 29.3 63.7 63.7 56.8 56.8 56.8

75 80 86 101 114 142 168 220 272 326 377 408 460 510 560 662

105 110 116 131 144 172 198 250 302 356 407 438 490 540 590 692

125 130 136 151 164 192 218 270 322 376 427 458 510 560 610 712

185 190 196 211 224 252 278 330 382 436 487 518 570 620 670 772

225 230 236 251 264 292 318 370 422 476 527 558 610 660 710 812

285 290 296 311 324 352 378 430 482 536 587 618 670 720 770 872

325 330 336 351 364 392 418 470 522 576 627 658 710 760 810 912

385 390 396 411 424 452 478 530 582 636 687 718 770 820 870 972

425 430 436 451 464 492 518 570 622 676 727 758 810 860 910 1012

15

Cryogenic Pipe s Cold Shoes – Line Stop

- Supplied with Line Stops - To order please specify width of ing steel DIMENSIONS LAGGING O/DIA TYPE A B H L S W X1 Y STOP SECTION

TABLE 8 164265

270370

375400

CSLS-1

425500

500750

775850

8501100

CSLS-2

350 A/2+53 300 50 100

350 A/2+53 300 50 150

350 A/2+53 300 50 200

400 A/2+56 350 50 250

400 A/2+56 350 50 300

450 A/2+56 400 50 400

450 A/2+56 400 50 450

140 150 76 x 38 RSC

250 102 x 51 RSC

300 127 x 64 RSC

360 76 x 76 RSJ

450 415 102 x 102 RSJ

500 500 102 x 102 RSJ

600 570 102 x 102 RSJ

16

Cryogenic Pipe s

COLD SHOES – LINE STOP TABLE FOR LAGGING OUTSIDE DIAMS (A) PIPE SIZE

PIPE O/DIA

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600

21.36 26.67 33.40 48.26 60.33 88.90 114.30 168.28 219.08 273.05 323.85 355.6 406.4 457.2 508.0 609.6

SAFE WORKING LOADS (kN) VERT

3.4 4.9 6.2 9.2 11.8 17.4 22.6 50.0 59.3 65.1 74.4 83.7 85.2 101.8

TABLE 9 (incl. st.st. jacket 1.6mm)

COLD INSULATION THICKNESS

AXIAL

25

40

50

80

100

130

150

180

200

2.6 5.9 7.0 9.6 12.1 23.5 30.0 36.7 43.0 47.0 53.4 59.8 66.2 78.9

75 80 86 101 114 142 168 220 272 326 377 408 460 510 560 662

105 110 116 131 144 172 198 250 302 356 407 438 490 540 590 692

125 130 136 151 164 192 218 270 322 376 427 458 510 560 610 712

185 190 196 211 224 252 278 330 382 436 487 518 570 620 670 772

225 230 236 251 264 292 318 370 422 476 527 558 610 660 710 812

285 290 296 311 324 352 378 430 482 536 587 618 670 720 770 872

325 330 336 351 364 392 418 470 522 576 627 658 710 760 810 912

385 390 396 411 424 452 478 530 582 636 687 718 770 820 870 972

425 430 436 451 464 492 518 570 622 676 727 758 810 860 910 1012

17

Cryogenic Pipe s Cold Shoes – Anchor

DIMENSIONS LAGGING O/DIA TYPE A B H L S W W X1 Y

TABLE 10 164265

270370

375400

425500

CSAS-1

500750

775850

8501100

CSAS-2

350 A/2+53 300 50 100

350 A/2+53 300 50 150

350 A/2+53 300 50 200

400 A/2+56 350 50 250

400 A/2+56 350 50 300

450 A/2+56 400 50 400

450 A/2+56 400 50 450

140 150

250

300

360

450 415

500 500

600 570

18

Cryogenic Pipe s

COLD SHOE – ANCHOR TABLE 11 TABLE FOR LAGGING OUTSIDE DIAMS (A) (incl. st.st. jacket 1.6mm) PIPE SIZE

PIPE O/DIA

15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600

21.36 26.67 33.40 48.26 60.33 88.90 114.30 168.28 219.08 273.05 323.85 355.6 406.4 457.2 508.0 609.6

COLD INSULATION THICKNESS

SAFE WORKING LOADS (kN) VERT

3.4 4.9 6.2 9.2 11.8 17.4 22.6 50.0 59.3 65.1 74.4 83.7 85.2 101.8

AXIAL

2.6 5.9 7.0 9.6 12.1 23.5 30.0 36.7 43.0 47.0 53.4 59.8 66.2 78.9

LATERAL

25

40

50

80

100

130

150

180

200

2.4 2.4 5.5 5.5 5.5 8.9 8.9 20.0 23.7 25.9 29.7 29.8 30.3 35.2

75 80 86 101 114 142 168 220 272 326 377 408 460 510 560 662

105 110 116 131 144 172 198 250 302 356 407 438 490 540 590 692

125 130 136 151 164 192 218 270 322 376 427 458 510 560 610 712

185 190 196 211 224 252 278 330 382 436 487 518 570 620 670 772

225 230 236 251 264 292 318 370 422 476 527 558 610 660 710 812

285 290 296 311 324 352 378 430 482 536 587 618 670 720 770 872

325 330 336 351 364 392 418 470 522 576 627 658 710 760 810 912

385 390 396 411 424 452 478 530 582 636 687 718 770 820 870 972

425 430 436 451 464 492 518 570 622 676 727 758 810 860 910 1012

19

Cryogenic Pipe s Anchor – Stop Plates Arrangements

Material used in welded pipe attachment shall be compatible with pipe material.

ANCHOR STOP PLATES

25 x 6 FLAT

TABLE 12

Q UNITHERM

BLOCK R U

120

120

120

150

150

150

150

52 50

52 50

47 50

47 50

47 50

72 50

72 50

20

Cryogenic Pipe s Typical Assembly of PU Cradle

Metal Sheet Vapour Seal

TABLE 14

Bearing PL Metal jacket (st. st.) protection sheild

Vapour

1. Layers shall be bonded together 2. The longitudinal ts between top and bottom PU foam cradles shall have a gap to allow for tightening of bearing plate bolts. TABLE 13

LINE SIZE

PRE-FORMED PU FOAM DENSITY SLIDES GUIDES CRADLES CRADLES

ANCHORS CRADLES

LOWER

UPPER

LOWER

UPPER

LOWER

UPPER

15200

160

160

224

224

224

224

250600

224

160

320

224

320

224

Available PU Foam Density; 160, 224 & 320 kg/m³

TOTAL INSUL. THICKNESS

PREFORMED / PU FOAM

30 40 50 60 70 80 90 100

30 40 50 30/30 30/40 40/44 50/44 50/50

110 120 130

50/60 30/40 30/50/50

140 150 160 170 180 190

40/50/50 50/50/50 50/60/50 50/70/50 50/80/50 50/90/50

200

50/100/50

21

Cryogenic Pipe s Cold Break Pipe s Cold break pipe s are designed to achieve sufficient thermal insulation between piping which is subject to sub-zero temperatures, and the ing steelwork or concrete structures operating at ambient temperatures. Product Range Selection from one of MAINEPORT’s standard units enables customers to specify their precise requirements without engineering drawings, either directly from this publication or in conjunction with another from our product range.

Pipe Guides & Clamps (Size 15-200NB) Moulded Pipe Shoe Base s Pipe Clamps (Hangers) Pipe Trunnions Clamped Pipe Shoes 40-200NB Clamped Pipe Shoes 250-600NB Pipe Anchors 40-200NB Pipe Anchors 250-600NB

TYPE IGC MS IB IC IT KS KS KA KA

PAGE No. 26 27 28 29 30 31 32 33 34

We can also supply special insulated units manufactured specifically to meet clients requirements, in any configuration or insulation type and thickness. Design features Excellent thermal insulation properties High load bearing properties Lightweight Water and dirt resistant Full fire protection Effective over a wide temperature range Low smoke generation Low toxicity

Cost Effective standardized unit Acoustic damping properties Range of insulation materials Maintenance free operation Compatible with all other MAINEPORT products

22

Cryogenic Pipe s

Standard Features Compatibility: Materials:

Insulation: Specification: Quality:

Threads: Installation: Safety:

Designs are compatible with most ranges of standard pipe systems, and all other products in the MAINEPORT range. Components are manufactured from BS4360 Grade 43EE or equivalent, bolts to ASTM A320/320M L7 and nuts to ASTM A194 Grade 4. ‘UNITHERM 1000’ phenolic/glass laminate. All components conform to British Standards where applicable. All MAINEPORT products are of high quality manufactured and tested in accordance with established in-house quality assurance procedures. Inspection release and certificates of conformity supplied as standard with each unit. All threads are ISO metric. Units may be clamped, welded or banded to pipe line. All units are designed with an adequate safety factor in accordance with recognised international standards.

Optional Features Materials: Insulation Material: Quality Assurance: Finish:

Ancillary Equipmeny: Special s: Acoustic Damping:

Components manufactured from other materials are available to suit operating conditions. Densified wood laminates, cellular glass and polyurethane foam are also available. Full documentation covering material traceability and original certification is available on request. Alternative surface preparations and finishes are available on request to suit customers own specifications and aggressive service environments. Beam attachments, hanger rods, spring s and PTFE slider units are available. (See Section 3 - PTFE Slider Units). MAINEPORT design and manufacture s for special applications where standard units are not suitable. Anti-vibration pads can be readily bonded to the units if required.

23

Cryogenic Pipe s MAINEPORT Cold Pipe s Insulation Materials MAINEPORT standard cold s incorporate ‘Permali’ insulation materials. Permali have over 50 years experience in the manufacture of natural and man made materials for industry, and are part of the BTR Group. The intrinsic properties of laminate materials offer a range of insulating products with proven engineering capabilities. In the early 1960’s a replacement for natural timbers was needed. Increased loads and thermal fractures were causing problems and with the advent of large bore insulated pipework there was an urgent need to improve the bearing and thermal properties of the structures. At that time, and until the present day, the Phenolic wood laminate called Permali fulfilled the requirements for most general applications. For the more arduous conditions where better cryogenic properties and a higher flexural and impact strength were required at temperatures down to 4°K, a unique type of composite laminate called Permaglass X was developed. This material has been in service since its development in 1968 on many applications world-wide. Product Development To meet today’s increasing sophistication of plant and pipelines with the need to improve the fire and thermal resistance of all materials, a number of glass reinforced insulation laminates have been developed. Permaglass laminates meet the criteria needed to provide and insulation that meet the exacting standards set by the industry and offers a specification tailored to satisfy BS476 Parts 5-7. Grades of Insulation UNITHERM 1000®

This is a phenolic/glass composite laminate which may be used as a standard load bearing insulation material on all cryogenic pipe s. Densified wood Established insulation material which offers unusual scope to pipework designers in that its maximum mechanical strength can be developed in any direction to suit specific applications.

24

Cryogenic Pipe s Advantages of UNITHERM 1000® The combination of extremely low thermal conductivity, high mechanical strength, water resistance and excellent fire/smoke performance makes UNITHERM 1000 unique and superior to other products presently available. For example, a “K” value below 0.13W/mC, a compressive strength of more than 240 Mpa, a fire performance rating of class 1 to BS476 pt7, a smoke generation in the event of fire of only 55% mean to BS5111. See full technical data on page 34. UNITHERM 1000 is easily machined to engineering tolerances and where required the material can be screw threaded for simplified assembly. UNITHERM 1000 is impervious to most solvents, is dimentionally stable and being phenolic based offers full fire protection plus exceptionally low smoke and toxicity properties. At cryogenic temperatures the material shows an increase in mechanical and thermal performance. The high compressive strength properties enable a design to optimize conductivity and mechanical properties whilst minimising material content and costs. All insulation materials are produced under the quailty control of EN ISO 9001: 1994 with full design and material technology available. Ordering Information Specify the material, insulation thickness and corrosion protection required for pipe . Stipulate the type of unit including any additional requirements such as site fixing holes or PTFE. Order all s by type and quantity for standard units, none standard dimensions should be amended to suit clients specific requirements. Installation Cold pipe s may be clamped, welded, banded or bolted directly to the pipe or ing steel. NB see appropriate type for site fixing dimensions if required.

25

Cryogenic Pipe s Insulated Guides & Clamps Type IGC

A N.B. mm

B

C

15 30 54 20 30 60 25 30 68 32 40 80 40 40 90 50 40 102 80 40 130 100 50 150 150 50 217 20 50 268 NOTE: 1) Compressive Load Safety Factor of 7

D

G DIA HOLE

MAX COMPRESSIVE LOAD KN@-100

86 92 100 116 126 138 166 198 265 316

10 10 10 12 12 14 14 14 18 18

11 14 17 29 34 34 34 34 34 34

26

Cryogenic Pipe s Moulded Pipe Shoe Type MS

MAX A B STRAP BOLT COMPRESSIVE N.B. BASE PLT C WIDTH & LOAD (SINGLE) DIA mm WIDTH THICK kN@-100°C 25 100 8 M6 40 X 3 87 40 120 8 M10 40 X 3 126 50 150 8 M10 40 X 5 156 80 170 8 M12 40 X 5 232 100 210 8 M16 50 X 6 298 150 290 10 M16 60 X 8 298 200 340 10 M20 60 X 8 298 250 400 10 M20 60 X 8 298 300 460 10 M20 60 X 8 298 NOTEs: 1) Unit can be supplied as either a single or double unit. Where double units are required on base plate will cover both blocks. 2) Compressive Load Safety Factor of 7.

27

Cryogenic Pipe s Insulated Base Plate / Attachment Type IB

A SQ PLATE 320 350 405 460 505 560 590 645 705 795 935

B PCD 250 280 335 390 425 470 540 555 615 705 845

T THICK 10 12 12 12 16 16 16 16 20 20 20

BOLT DIA 14 14 14 18 18 18 18 22 22 22 22

28

Cryogenic Pipe s Pipe Clamp Type IC

PIPE PIPE INS’N BLOCK BLOCK WEIGHT MAX N.B. THICK B ID OD Kg LOAD mm MAX 20 122 29 273 100 3 4.5 25 119 35 273 100 3 4.5 40 111 50 273 100 2.9 4.5 50 131 62 324 100 4.5 9.0 80 116 91 324 100 4.2 9.0 100 104 116 324 100 5.8 9.0 150 118 170 406 150 8.6 14 200 118 221 457 150 15.4 18 250 116 275 508 150 18.4 27 300 142 326 610 150 25.2 27 NOTES: 1) Special 2 or 3 hole pipe clamps can be manufactured to suit clients specific insulation thickness. 2) 3mm gap between segments sealed with mastic. 3) Cellular glass or polyurethane foam insulation also available.

29

Cryogenic Pipe s Pipe Trunnion Type IT 40-500

A N.B Mm

T Thick

B SQ

C CTRS

G DIA

F FILLET

WEIGHT Kg

80 100 150 200 250 350 450 500

12 12 12 12 15 15 15 15

150 200 250 300 350 450 550 600

100 140 190 240 290 370 470 520

8 8 10 12 12 16 16 16

6 6 60 6 8 8 8 8

5 9 14.4 21 28.5 47.5 71.5 85.3

MAX SAFE WORKING LOADS (kN) COMPR. (LATERAL)

139

42

30

Cryogenic Pipe s Clamped Pipe Shoe 40-200 NB Type KS

PIPE N.B. mm 40 50 80 100 150 200

PIPE INS’N THICK max 110 160 110 160 110 160 110 160 110 160 110 160

WEB HEIGHT 100 150 100 150 100 150 99 149 95 145 95 145

WEIGHT Kg (L=300) 9.2 10.3 9.4 10.5 9.6 10.7 10.9 12.0 14.0 15.1 15.1 16.1

MAX SAFE WORKING LOADS (kN) Compr. Axial

58

42

77

NOTES: 1) All welds 6mm CFW. 2) Specify shoe length. 3) Advise fixing bolt dia/centres if required.

31

Cryogenic Pipe s Clamped Pipe Shoe 250-600 NB Type KS

PIPE N.B. mm 250 300 350 400 450 500 600

PIPE INS’N THICK MAX 110 160 110 160 110 160 110 160 110 160 110 160 110 160

SHOE WIDTH W 150 150 200 250 250 250 250

WEB HEIGHT Y

WEIGHT Kg (L=300)

93 143 93 143 93 143 93 143 90 140 90 140 90 140

25.0 27.4 26.4 28.8 36.3 39.1 41.9 44.7 48.8 52.0 51.8 55.0 68.2 71.4

SAFE WORKING LOAD (kN) Compr

Axial

280

357

42

450

NOTES: 1) All welds 6mm CFW. 2) Specify shoe length. 3) Advise fixing bolt dia/centres if required.

32

Cryogenic Pipe s Pipe Anchor 40-200 NB Type KA

PIPE WRAPPER WEB WEIGHT INS’N RADIUS PLATE HEIGHT Kg THICK R WIDTH Y (L=450) MAX 110 105 12.7 40 * 160 155 14.3 110 105 12.7 50 * 160 155 14.3 110 99 160 80 45 100 160 149 17.6 110 99 16.9 100 58 130 160 149 18.5 110 97 18.6 150 85 180 160 147 20.0 110 96 20.2 200 110 230 160 146 21.6 * indicates no wrapper palte required: Web welded to pipe. Specify anchor length ‘L’. Advise fixing bolt dia/centres if required. Compressive and Axial Load Safety Factor of 7.

PIPE N.B. mm

1) 2) 3) 4)

MAX

MAX AXIAL LOAD

COMPRESSIVE LOAD (L=450) kN@-100°C

kN@-100°C

245

40

33

Cryogenic Pipe s Pipe Anchor 250-600 NB Type KA

PIPE N.B. MM

250 300 350 400 450 500 600

MAX

PIPE INS’N THICK MAX

WEB HEIGHT Y

110 160 110 160 110 160 110 160 110 160 110 160 110 160

95 145 95 145 95 145 95 145 95 145 95 145 95 145

WRAPPER

WIDTH W

RADIUS R

150

137

290

150

162

340

200

178

380

200

204

430

PLATE WIDTH

250

230

480

250

255

540

250

306

650

WEIGHT WIDTH (L=450)

26.6 30.0 28.3 31.7 32.5 37.6 35.3 39.2 41.1 45.5 43.1 47.5 46.7 51.5

COMPRESSIVE

LOAD (L=450)

kN@-100°C

245

MAX AXIAL LOAD kN@100°C

40

440

63 470

NOTES: 1) * indicates no wrapper palte required: Web welded to pipe. 2) Specify anchor length ‘L’. 3) Advise fixing bolt dia/centres if required. 4) Compressive and Axial Load Safety Factor of 7.

34

Cryogenic Pipe s UNITHERM 1000® High Density Thermal Insulation Block Technical Data Thermal conductivity

@ @ @ @

Specific gravity

+200°C +100°C -50°C -100°C

mean mean mean mean

1.0

Water absorbtion

0.227 W/m°C 0.209 W/m°C 0.155 W/m°C 0.138 W/m°C (density 1000kg/m3)

BS 2782 pt 4

0.9%Max

Flexural strength Flexural strength Flexural modulus Flexural modulus

@ @ @ @

20°C -150°C 20°C -150°C

BS 2782 pt 10 BS 2782 pt 10 BS 2782 pt 10 BS 2782 pt 10

85 97 5.1 5.4

MPa Min MPa Min GPa Min GPa Min

Compressive strength

@ @ @ @ @ @ @ @ @

200°C 100°C 23°C -50°C -100°C -150°C 20°C 20°C 20°C

BS 2782 pt 3 BS 2782 pt 3 BS 2782 pt 3 BS 2782 pt 3 BS 2782 pt 3 BS 2782 pt 3 BS 2782 pt 3 BS 2782 pt 3 BS 2782 pt 10

58 106 158 195 232 >240 40 16 60

MPa Min MPa Min MPa Min MPa Min MPa Min MPa Min MPa Min kJ/m2 Min MPa Min

Elec. insulation resistance

BS 2782 pt 2

10³M ohms Min

Flammability Surface spread of flame Ignitability Smoke generation Operating range

UL 94 BS 476 pt 7 BS 476 pt 5 BS 5111 pt1

V-O self extinguishing time. Class 1 with 0 flame spread. Designation P, not ignitable. Mean 55% -196°C to 200°C

Shear strength Charpy impact strength Tensile strength

35

Cryogenic Pipe s PFTE Slider Assemblies PTFE Slider Assemblies provide a simple and cost-effective solution to engineering problems where movement has to be accommodated. Current applications include piping systems, structures and containments subject to thermal, seismic, static and dynamic forces which include low-velocity relative movement of components. Assemblies can incorporate insulation, damping and other barrier materials to further improve the performance of the bearings in specific applications. About PTFE Polytetrafluoroethylene offers the lowest coefficient of friction of any known solid material. It is highly chemical-resistant and has no ‘stick-slip’ action, giving a very cost-effective solution for bearing applications with no maintenance costs and virtually indefinite life over a temperature range of minus 30 to plus 200°C. Advantages of PTFE Bearings Cost-effective solution High bearing loads Temperature resistance Electrical and Thermal Insulation Dirt absorbtion Corrosion free Simple and rapid installation Lubrication and maintenance-free operation Vibration damping characteristics MAINEPORT PTFE Slider Assemblies incorporate our wide experience in the manufacture, supply and construction of piping systems, steel structures and pressure vessels. They are designed and manufactured in-house at our own fabrication facility - your assurance of quality, innovation and excellence.

36

Cryogenic Pipe s Product Range MAINEPORT manufacture two ranges of slider units to a standard specification, which together with a range of optional features meet most customer’s requirements. We also supply special units manufactured in any combination of dimensions and materials (see below). The PP range is suitable for pipeline systems with no significant lateral movement and axial movement of up to 250mm. The PC range is suitable for structural and containment applications and can be specified to accomodate movements of up to 800mm. Standard Specification Stainless steel backing plate: 3mm thick to BS1501 Part 3 Gr. TP 304. Plain PTFE Pad (top and bottom): 1.5mm thick, bonded to backing plate. Backing plates are suitable for fixing to mating surfaces by welding at each corner. Optional Features Glass-filled PTFE for higher bearing loads. Screw, grout or adhesive fixing. Heavy backing plates in alternative materials. Non-standard dimensions. Thermal insulation barriers.. Vibration and corrosion-resisting barriers.

37

Cryogenic Pipe s Type PP Range Standard Units for Pipelines (no lateral movement)

Table (i) MAX LOAD (Kg) BASED

REF. No.

TYPICAL PIPE SIZE (mm dia)

TOP PLATE (mm) LxW

BOTTOM PLATE (mm) LxW

MAX AXIAL MOVEMEN T (mm)

AREA (cm²)

ON PRESSURE OF 60kg/cm²

PP1 PP2 PP3 PP4 PP10 PP20 PP30 PP40

50-200 250-300 350-400 450-600 50-200 20-300 350-400 450-600

300x100 300x150 300x200 300x250 450x100 450x150 450-200 450x250

200x100 200x150 200x200 200x250 200x100 200x150 200x200 200x250

100 100 100 100 250 250 250 250

75 150 225 300 75 150 225 300

4500 9000 13500 18000 4500 9000 13500 18000

BEARING

Units can be supplied with wider top plates and pads to accomodate lateral movement.

Selection You can select a type PP unit direct from your known pipe size, load and movement by referring to the table above.

38

Cryogenic Pipe s Design Guidance Notes General The pupose of the bearing assembly is to permit relative movement between engineering components inducted by the various forces to which the components are subjected. There may also be contractual interface between components and therefore it is essential that the design considerations are co-ordinated in a systematic manner, for example in accordance with BS EN ISO 9001. To select the appropriate PTFE Slider Assembly you require the following design data: Loads Movements Mating component dimensions and materials Dimensional constraints Temperature The normal design range is minus 30 to plus 120°C; temperatures up to 200°C continuous can be accommodated by using special bonding agents and techniques. If your design temperatures are outside this range, specify thermal insulation barrier materials (we will advise you on specific applications) to ‘sandwich’ between mating components and the PTFE bearing. Friction The friction coefficient of PTFE is dependant on the bearing pressure as shown in Chart No. 2 overleaf. The surface roughness, relative velocity and temperature will also influence friction coefficient, however for optimum results high bearing pressures are recommended as shown in Chart No. 1. The charts describe the performance of plain PTFE which we recommend and incorporate in our standard units on both upper and lower surfaces. If dimentional constraints require that a smaller unit be specified (i.e. with a higher bearing pressure) then glass-filled PTFE or a polished stainless steel upper plate can be used - we will advise you on specific applications. Generally, the of heavy loads over small areas should be avoided.

39

Cryogenic Pipe s Type PC Range Standard Units for Structures and Containments Ref No. BACKING PLATE WIDTH (mm)

100 150 200 250 300

PC 10

PC 15

PC 20

PC 25

PC 30

PC 35

PC 40

PC 45

PC 50

PC 60

PC 75

PC 90

500 225 450 675 900 1125

600 275 550 825 1100 1375

750 350 700 1050 1400 1750

900 425 850 1275 1700 2125

BACKING PLATE LENGTH L (mm) 100 25

150 50 100

200 75 150 225

250 100 200 300 400

300 125 250 375 500 625

350 150 300 450 600 750

400 175 350 525 700 875

450 200 400 600 800 1000

Table (ii) Bearing Area (cm²) Selection Determine optimum bearing pressure, (see section on design considerations) and load to be carried. Divide load by bearing pressure to give bearing area required (check units: above table is in cm2). Select appropriate size of bottom plate (length x width) from the above table taking into dimensions of mating structural elements. Size top plate by adding movement required in each plane. Specify each plate separately as shown in the example.

40

Cryogenic Pipe s Example Optimum bearing pressure = 60kg/cm2 Load = 13360 kg, therefore area required = 13360 --: 60 = 222.6 cm2 Therefore we could use the following sizes (from table II) 500 x 100 (LxW) 300 x 150 200 x 200 Mating structural elements is (say) 300 x 300 column base Therefore use 200 x 200 unit Top Plate Movement required is 100 longitudinal, zero lateral Therefore Top Plate = (200 + 100) x 200 = 300 x 200 unit i.e. PC30 W = 200 Note: The mating strucrural element must be at least as large as the backing plate and sufficient to carry the load. If not, a more substantial backing plate can be supplied; consult our Engineering Department. Bearings with anti-vibration pads and hot or cold insulation materials are also available to special order (please refer to MAINEPORT Insulated Pipe catalogue).

41

Cryogenic Pipe s Deg your own unit First calculate the bearing area: Divide your known load by the recommended bearing pressure.NB: If you are ing a large component you can use a number of smaller bearings spaced to provide adequate and distributed . Determine the bearing dimensions you require from the bearing area and component dimensions. The upper plate is sized larger than the lower plate by the amount of movement you require in each direction. Allow 25mm all round from the edge of the backing plate to the PTFE pad. Example Horizontal pressure vessel Vessel weighs 50 Tonnes Operating Temp is 100°C Vessel is ed by two saddles 300mm wide . . load on each saddle is 25000 kg Movement required is 100mm along length of vessel From chart No. 1 Maximum Bearing Pressure is 40 kg/cm2 . .Minimun Bearing Area = (25000 --: 40) = 625 cm2 Maximum width of top slider plate is 300 - (2 x 25) = 250 . . Minimum width of bottom slider plate is 250 - 100 = 150 . . length of slider plate is (625 --: 15) = 41.67cm Maximum size of slider plates are as follows:Top or

250mm x 420 in one piece 250mm x 210 in two pieces

or

150mm x 420 in one piece 150mm x 210 in two pieces

Bottom

42

Cryogenic Pipe s Installation and Maintenance Installation of MAINEPORT standard units could not be simpler. Ensure that PTFE faces are parallel and bearing over the whole surface. Tack weld in position at each corner, re-check position before fillet welding each corner only. Use a suitable 3.25mm stainless steel electrode e.g. BS2926 Class 23.12. LAR for welding to carbon steel and weld 25mm around each corner. NB. Protect the PTFE from weld spatter. For mechanical fixing MAINEPORT recommend countersunk stainless steel screws; we do not recommend adhesives for site application. MAINEPORT standard backing plates are made from 3mm thick Grade 304 stainless steel: we do not recommend the use of carbon steel, due to potential corrosion problems; the carbon steel cannot be galvanised as the PTFE will not bond to this type of surface. If the carbon steel is painted then the plates are inaccessible for repainting after installation and welding. The use of thinner stainless steel backing plates, or polished stainless steel upper bearing plates can lead to distortion during installation and ‘pick-up’ during operation. MAINEPORT units do not normally require dust seals or lubrication and are maintenance free. Ordering Information Specify quantity, standard specification and type / size, optional features and dimensions.

43