Catalogo Chumaceras Link Belt 3v5z2s

Contents

Introduction

Introduction A-1 Available Software A-2 New Products A-2

A

Ball Bearings, Ball Bearing Units and Takeups

Introduction B-1, Pictorial Index B-3, Selection B-9, Load Ratings B-11, Dimensions B-13, Additional Information B-75, Nomenclature B-78

B

Heavy Duty Ball Bearing Units

Introduction C-1, Pictorial Index C-3, Selection C-5, Load Ratings C-7, Dimensions C-9, Additional Information C-17, Nomenclature C-18

C

Spherical Roller Bearing Units and Takeups

Introduction D-1, D-27, D-41; Pictorial Index D-3, D-29, D-43; Selection D-5, D-31, D-45; Load Ratings D-7, D-33, D-47; Dimensions D-9, D-35, D-49; Replacement Parts D-61, Additional Information D-68, Nomenclature D-70

D

Spherical Roller Bearing Pillow Blocks and Takeups

Introduction E-1, Index E-3, Selection E-7, Load Ratings E-9, Dimensions E-15, Nomenclature E-27, Replacement Parts E-29, Additional Information E-34

E

Spherical Roller Bearings

Introduction F-1, Index F-2, Selection F-3, Load Ratings F-5, Dimensions F-7, Additional Information F-17, Nomenclature F-18

F

Cylindrical Roller Bearings

Introduction G-1, Pictorial Index G-3, Selection G-5, Load Ratings G-7, Dimensions G-15, Additional Information G-31, Nomenclature G-32

G


Introduction H-1, Selection H-3, H-7; Load Ratings H-5, H-9; Dimensions H-6, H-11; Additional Information H-15, Nomenclature H-16

Sleeve Bearing Units and Takeups

Introduction I-1, I-19; Pictorial Index I-3, I-20; Selection I-5, I-21; Load Ratings I-7, I-23; Dimensions I-9, I-25; Replacement Parts I-17, Nomenclature I-29

Bearing Number Index Appears on Last Page.

H I

Link-Belt® Bearings.

Across industry, the name “Link-Belt” is recognized as a symbol for a superior line of bearings. Today, the Link-Belt Bearing Division’s principal product line consists of cylindrical roller bearings; ball bearings and ball bearing units, self-aligning spherical roller bearings and spherical roller bearing units; babbitt and bronze sleeve bearing units and takeups. All in a wide range of sizes suitable for practically all industrial requirements. Mere completeness, however, does not, by itself, make any line of bearings superior. What counts is the performance of each individual bearing type. And, in that respect, Link-Belt bearings offer a true competitive edge. Every Link-Belt bearing incorporates the benefits of years of continuous research and development. Benefits that directly translate to superior quality in every aspect of judging a bearing. Rugged, advanced design. Quality materials. Accurate workmanship. The most modern of manufacturing facilities and techniques. Plus, application expertise that can come only from years of close working relationships with industries of all kinds. Wherever shafts turn, Link-Belt bearings help transmit power with efficiency and reliability that industry after industry depends on. There can be no greater assurance of superior quality performance in your application. A wide network of stock-carrying distributors maintain immediately available quantities of Link-Belt bearings in a wide variety of types. To give you superior performance, when and where you need it. In turn, vast Link-Belt warehouse inventories distributor stocks, allowing for overnight delivery in many cases.

Further supplementing these efforts, strategically located Sales Offices provide for direct, in-depth consultation. Each is staffed with knowledgeable customer service representatives, area managers, and product specialists, who are able to aid in matters from the simplest application questions to developing complete power transmission systems for specific applications.

The industry's most efficient order processing system. To facilitate prompt, efficient service and order processing, Link-Bearing Division, Rexnord Corp. customers get quick, upto-the-minute “on-line” response to new orders, order status, and inventory availability, anywhere in the world … all with a simple phone call to their nearest Link-Belt Bearing Division Service Center. The minute an order is entered, the inventory is instantly reserved. The system even stores predetermined shipping instructions for individual customers, saving phone times and eliminating the possibility of an error. The result: Link-Belt order processing is faster, easier, and more accurate than any other power transmission equipment manufacturer’s system.

A-1

New Products

Corrosion resistant polyamide or polypropylene housings with auxiliary seals. See pages B-13 and B-14. T-frame protected screw takeup frames for pillow block mounting. Available in mild or 304 stainless steel. See pages B-57 and B-58. LHD heavy duty welded steel takeup frames with protected screws. See pages C-15, D-22 and E-25.

Engineering Software Developed by engineers at Link-Belt Bearing Division, AutoLINK™ Version 1.0 is a general purpose bearing analysis program that calculates reaction loads on two bearing shaft systems based on data supplied by the . Loads from belts, gears, chain drives or other predetermined loads are calculated. The program then either selects bearings for an application of analyzes pre-selected bearings. It can analyze up to three externally applied loads and provide analysis for up to five different shaft arrangements and multiple shaft diameters. The final output provides lubrication, installation and service instructions for the calculated bearing selection. A similar program call FANBAN™ is also available to help simplify fan and blower bearing selection and system analysis. For more information on these valuable time-saving programs, your Rexnord Representative or the Link-Belt Engineering Department. With Cad-Cat® software, you’ll avoid the need for redrawing Rex and Link-Belt components from scratch. And enjoy new levels of speed, accuracy and efficiency throughout the design process. Compatible with AutoCad® software CadCat creates CAD drawings on-line and at your fingertips. CadCat electronic catalogs are available for the following Rexnord product lines: Link-Belt Bearings, Link-Belt Model R Speed Reducers, Rex Bearings, Rex Omega Couplings and Rex Planetgear Speed Reducers. For more information on CadCat call: 1-414-643-3021. ® AutoCAD is a ed trademark of Autodesk, Inc. ® CadCat is a ed trademark of Rexnord Corp.

A-2

Ball Bearings, Ball Bearing Units and Takeups Contents

Series 200

Series 200

Ball Bearing Units and Takeups

Ball Bearing Units and Takeups Introduction ............................................ B-1 Pictorial Index ....................................... B-3 Selection ................................................. B-9 Load Ratings ...................................... B-11 Dimensions: Klean-Gard Units .......................... B-13 Dura-Klean Units ........................... B-15 Pillow Blocks .................................. B-21 Flange Blocks ................................. B-32 Takeups ............................................ B-51 Additional Information ..................... B-75 Nomenclature ..................................... B-78

Series 200 standard duty ball bearing units provide a versatility of application arrangements for carrying shafts with radial or combination radial and thrust loads. They are designed for general purpose industrial machinery, conveyors, chain and belt drives, fans and blowers, power transmission, and many other applications.

a Extended or wide inner ring for moderate or high stability and load . b Choice of spring locking or spring locking collar with set screws or eccentric cam locking collar to lock inner ring securely to shaft. c Choice of Steel-Clad Type H labyrinth seal Type N single lip seal or Type E3 triple lip seal. W200 series has Type U or Type E single lip seal. S200 Series has Type E single lip seal. d Compact one-piece housing provides excellent mounting . e Alignable precision deep groove ball bearing manufactured of quality alloy bearing steel provides high capacity and long life.

Series 200 Collar Mounted Ball Bearings, Spring Locking Ball Bearings, Round, Square and Hex Bore Ball Bearings Introduction ............................................ B-7 Pictorial Index ....................................... B-8 Selection ................................................. B-9 Load Ratings ...................................... B-11 Dimensions: U200, S200, Y200, W200 ....... B-63 Hex, Square, or Round Bore .... B-70 Additional Information ..................... B-77 Nomenclature ..................................... B-80

b

c

d

a

B-1

e

Wide and Extended Inner Ring Ball Bearings, Spring Locking Precision alignable ball bearings of deep groove construction for high capacity and high precision applications. Spring locking collar or set screw locking securely locks

the bearing to the shaft. The U200 wide inner ring furnishes increased shaft and accommodates wider seals for extra lubricant capacity.

Wide and Extended Inner Ring Ball Bearings, Eccentric Cam Locking Collars Precision alignable ball bearings of deep groove construction. Eccentric cam locking collars hold the bearings securely to the shaft and further tightens with bearing

rotation. The Y200 wide inner ring provides increased shaft and accommodates wide seals for extra lubricant capacity.

Steel-Clad Seals

TYPE H SEAL

TYPE N SEAL

TYPE E3 SEAL

All bearing type seals are crimped tightly in the bearing outer rings with steel and cannot be blown out during relubrication.

Type E3 triple lip seal is a tight high torque seal for ultimate dirt exclusion. It has an external trash guard to protect the precision die molded lip .

Type N lip seals have the same contoured external trash guard for maximum lip protection and a full land riding lip for grease retention and dirt exclusion. The Type N seal rides on a precision ground surface of the bearing inner ring for smooth operation and tightness.

Type E molded lip seal with external trash guard for maximum lip protection and a full land riding lip for grease retention and dirt exclusion.

TYPE E SEAL

Type H multi-labyrinth seal with contoured external trash guard is an excellent all purpose low friction seal for grease lubrication.

One-piece Housings Rugged one-piece precision machined housings of many types provide a versatility of mounting arrangement and facilitate installation. All mounting surfaces are fully machined and all housings provide for easy bearing relubrication. Grease flows through the fitting into a machined grease groove

and through the lubricant holes of the outer ring directly into the bearing chamber between the seals. Pillow blocks have slotted bolt holes with ample space provided for drilling dowel pin holes. Flanged units have drilled mounting holes. Takeup units have machined slots for accurate adjustment.

B-2

Standard Duty Ball Bearing Units

Series 3-200, 200 Pillow Blocks, Cast Iron P3-U200N, PL3-U200N, PH3-U200N, PT3-U200N, PL3-Y200N, P3-Y200N Alignable pillow blocks for shaft sizes ¹⁄₂" through 4" (17-100 mm). Open or closed end, and standard, high or low backing dimension. Available with type H, type N, type E3, seals for grease lubrication. Load ratings on pages B-11 and B-12. Dimensions on pages B-21 and B-22, B-25 and B-26, and B-30 and B-31. Additional information on page B-75.

Flanged Units, 2, 3, and 4-bolt FX3-U200N, FX3-Y200N, F3-U200N, F3-Y200N, FB3-U200N Alignable 2-bolt units for shaft sizes ¹⁄₂" through 2³⁄₁₆" (17-55 mm); 3-bolt units for shaft sizes ⁷⁄₈" through 1⁷⁄₁₆" (25-85 mm); 4-bolt units for shaft sizes ¹⁄₂" through 3¹⁄₂" (17-85 mm). Open or closed end, drilled bolt holes, and machined mounting surfaces. Furnished with eccentric cam or spring locking. Available with type H, type N or type E3, seals for grease lubrication. Load ratings on pages B-11 and B-12. Dimensions on pages B-32 through B-34, B-37 and B-38. Additional information on page B-75.

Flanged Cartridge Units FC3-Y200N, FC3-U200N Alignable units for shaft sizes ⁷⁄₈" through 4" (25-100 mm). Open or closed end, drilled bolt holes, and machined mounting surfaces. Available with type H, type N, type E3 seals for grease lubrication. Load ratings on pages B-11 and B-12. Dimensions on pages B-41 and B-42. Additional information on page B-75.

Takeup Units T3-U200N, TH3-U200N Alignable units for takeup applications with shaft sizes ¹⁄₂" through 2⁷⁄₁₆" (17-55 mm) with narrow or wide slots. Open or closed end and without frames, guides, or adjusting screws. Furnished with type N seals for grease lubrication. Load ratings on pages B-11 and B-12. Dimensions on pages B-51 and B-53. Additional information on page B-75.

B-3

Takeups, Steel Frames Adjustable type takeups for conveyors and elevators. Spring locking. Furnished with type N lip seals for grease lubrication. TAS3-U200N Conveyor takeup with formed steel frame for moderate service. Bearing bores are perpendicular to the base of the frame. Shaft sizes ¹⁵⁄₁₆" through 2³⁄₁₆" (25-55 mm). TDS3-U200N Conveyor takeup with removable top welded steel frame, for moderate to heavy service. Bearing bores are parallel to the base of the frame. Shaft sizes 1¹⁵⁄₁₆" through 3¹⁵⁄₁₆" (50-100 mm). NT3-U200N Load ratings on pages B-11 and B-12. Dimensions on pages B-55 through B-60. Additional information on page B-75.

Conveyor takeup with welded steel channel frame for moderate service. Bearing bores are parallel to the base of the frame. Shaft sizes ¹⁵⁄₁₆" through 1¹⁵⁄₁₆" (25-50 mm). LC Universal takeup frames for mounting with all pillow blocks. TP, TSP, TPT, TSPT Universal T-frame takeup for mounting with pillow blocks or tapped base pillow blocks. T-frames are mild steel (TP, TPT) or AISI 304 stainless steel (TSP, TSPT). Also available with quick release feature for pillow block mounting and AISI 304 stainless steel frame.

Screw Conveyor Units Double ball bearing trough end units and hanger bearing units. FF200N Four bolt square trough end flanged units for shaft sizes 1¹⁄₂" through 3⁷⁄₁₆", and spring locking mounting. Two ball bearings for taking screw thrust and external chain or belt loads. HM3-U200E3, HM3-U200N

Alignable hanger bearing units, relubricatable, or spring locking, with type E3 triple lip seals or type N lip seals. Units made to fit square tubing with separate internal grease pipe for extra rigid mounting. Available for shaft sizes 1¹⁄₂" through 3⁷⁄₁₆".

Load ratings on pages B-11 and B-12. Dimensions on pages B-61 and B-62. Additional information on page B-75.

Replacement Bearings UG200NL, YG200NL Wide inner ring deep groove single row ball bearings for shaft sizes ¹⁄₂" through 4". (UG200 bearings are available with standard metric bores for shafting) (17 mm through 100 mm). Furnished with eccentric cam or spring locking or spring locking collar. Available with type N, type H, type E3 seals for grease lubrication. Load ratings on pages B-11 and B-12. Dimensions on pages B-64 and B-66. Additional information on page B-77.

B-4

Intermediate Ball Bearing Units Series 200 Pillow Blocks, Cast Iron P3-W200E, PL3-W200E, P3-S200E, PL3-S200E, PT3-S200E Alignable pillow blocks for shaft sizes ¹⁄₂" through 1¹⁵⁄₁₆", standard or low backing dimension. Available with type E seal. Relubricatable. Load ratings on pages B-11 and B-12. Dimensions on pages B-23 and B-24, B-27 and B-28, and B-30. Additional information on page B-76.

Pillow Blocks, Formed Steel PS-W200E, PS-Y200N, PS-U200N Alignable pillow blocks for shaft sizes ¹⁄₂" through 1⁷⁄₁₆". Standard backing dimension. Non-relubricatable. W200 series available with type E seals, U200 and Y200 series available with type N single lip or type E3 triple lip seal. Load ratings on pages B-11 and B-12. Dimensions on page B-29. Additional information on page B-76.

Flanged Units, 2, 3, and 4-bolt FX3-W200E, FX3-S200E, F3-W200E, F3-S200E, FB3-S200E Alignable flanged units for shaft sizes ¹⁄₂" through 1¹⁵⁄₁₆", two, three, or four bolt mounting. Available with type E seal. Relubricatable. Load ratings on pages B-11 and B-12. Dimensions on pagesB-32, B-35 and B-36, and B-39 and B-40. Additional information on page B-76.

Flanged Units, High-test Iron FX-U200N, FX-UG200N, FXR-U200N, FXR-UG200N FX-Y200N, FX-YG200N, FXR-Y200N, FXR-YG200N F-U200N, F-UG200N, FR-U200N, FR-UG200N F-Y200N, F-YG200N, FR-Y200N, FR-YG200N Alignable flanged units for shaft sizes ¹⁄₂" through 2", two, three, or four bolt mounting. W200 series available with type E seal, S200 series available with type E seal, U200 and Y200 series available with type N single lip or type E3 triple lip seals. Optional relubrication feature. Load ratings on pages B-11 and B-12. Dimensions on pages B-43 through B-46. Additional information on page B-76.

B-5

Takeup Units T3-S200E, TH3-S200E Alignable units for takeup applications with shaft sizes ³⁄₄" through 1¹⁵⁄₁₆" with narrow or wide slots. Opened or closed end and without frames, guides, or adjusting screws. Furnished with type E seals for grease lubrication. Load ratings on pages B-11 and B-12. Dimensions on pages B-52 and B-54. Additional information on page B-76.

Replacement Bearings U200NL, UG200NL W200EL, WG200EL Y200NL, YG200NL SG200EL Extended and wide inner ring deep groove ball bearings for shaft sizes ¹⁄₂" through 2⁷⁄₁₆". Furnished with eccentric cam collar or spring locking. Type E3 triple lip seal optional for series U200 and Y200. Load ratings on pages B-11 and B-12. Dimensions on pages B-63 through B-69. Additional information on page B-77.

Flanged Housings, 2-piece Formed Steel MST, MSTR, MS, MSC, GMSA-GMSB MST compact 2-bolt mounting for bearings of ¹⁄₂" through 1¹⁄₄" shaft diameter and basic 204 through 206 of the round, square and hex bore series. Dimensions on page B-50 MSTR-3 bolt triangular mounting for bearings of ³⁄₄" through 1¹⁄₄" shaft diameter and basic 204 through 206 of the round, square and hex bore series. Dimensions on page B-48. MS or MSC 3 or 4-bolt round mounting for bearings of ¹⁄₂" through 2³⁄₁₆" shaft diameter and basic 204 through 211 of the round, square and hex bore series. Dimensions on page B-47. GMSA-GMSB 3 or 4-bolt round mounting of the relubricatable type for ⁷⁄₈" through 2³⁄₁₆" shaft diameter or basic 205 through 211 of the round, square and hex bore series. Dimensions on page B-49. Load ratings on pages B-43 through B-46. Additional information on page B-76.

B-6

Series 200 Collar Mounted Ball Bearings Spring Locking Ball Bearing Round, Square and Hex Bore Ball Bearings Series U200, S200, W200, Y200 collar mounted or spring locking ball bearings, and round, square and hex bore ball bearings provide economic and versatile arrangements for ing shafts, especially with the 2-piece formed steel

flanged housings. These product lines are designed for light industrial applications, agricultural machinery, lawn and garden equipment, recreational vehicles and other applications.

d Extended or wide inner rings to meet diverse application requirements.

b

c d

Wide Inner Ring Ball Bearings, Spring Locking Series U200, UG200, UB200, UBG200

B-7

b Choice of spring locking collar with set screws or spring locking or eccentric cam locking collar to fasten inner ring securely to shaft. c Optional features such as spherical or cylindrical O.D.'s, relubricatable or non-relubricatable.

a

Ball bearing with wide inner rings provide mounting stability by distributing the load over a large shaft area. Spring locking design provides a secure grip of the bearing to the shaft. The extra inner ring width accommodates wider seals for increased

a Precision deep groove ball bearings or quality alloy bearing steel provide high capacity and long life.

lubricant capacity. Seals are crimped tightly in the bearing outer rings. Type N lip seals, type H labyrinth seals and type E3 triple lip seals can be furnished.

Extended Inner Ring Ball Bearings, Spring Locking Series SG200 Compact ball bearing with extended inner rings for space savings. Set screw locking, properly torqued, holds bearing securely to the shaft. Carbonized inner rings to resist

fracture. Type E molded seal protects bearing from dirt. Steel outer member protects against fiber wrappage.

Extended Inner Ring Ball Bearings, Eccentric Cam Locking Collars Series W200, WG200, WB200, WBG200 Compact ball bearings with extended inner rings for space savings. Eccentric cam locking collar holds bearing securely to the shaft. Shaft rotation further tightens collar. Type E molded seal protects

bearing from dirt. Steel outer member protects against fiber wrappage.

Wide Inner Ring Ball Bearings, Eccentric Cam Locking Collars Series Y200, YG200, YB200, YBG200 Ball bearings with wide inner rings provide mounting stability by distributing the load over a large shaft area. Eccentric cam locking collar design provides a secure grip of the bearing to the shaft. Shaft rotation further tightens collar. The extra inner ring

width accommodates wider seals for increased lubricant capacity. Type N lip seals, type H labyrinth seals and type E3 triple lip seals can be furnished.

Ball Bearings, Round Bore Relubricatable or non-relubricatable for shaft sizes ⁷⁄₈" through 2³⁄₁₆". Spherical or cylindrical outside diameters. Load ratings on pages B-11 and B-12. Dimensions on pages B-71 and B-72. Additional information on page B-77.

Ball Bearings, Square Bore Relubricatable or non-relubricatable for shaft sizes ⁷⁄₈" through 1¹⁄₂". Spherical or cylindrical outside diameters. Load ratings on pages B-11 and B-12. Dimensions on pages B-73 and B-74. Additional information on page B-77.

Ball Bearings, Hex Bore Non-relubricatable ball bearings for ⁵⁄₈" through 1⁵⁄₈" shaft size. Factory filled with grease. Spherical or cylindrical outside diameters.

Load ratings on pages B-11 and B-12. Dimensions on page B-70. Additional information on page B-77.

B-8

Selection

Ball Bearings and Ball Bearing Units To select a bearing, determine the applied radial load, the applied thrust load, the desired Rating Life, and applicable operating conditions. The procedure shown here will aid in selecting a bearing to meet an L₁₀ design life. The formulas for calculating life expectancy should be used to determine the Rating Life L₁₀ for the bearing selected. The selection procedures and rating formulas shown here are in agreement with The American Bearing Manufacturers Association Standards and ANSI/ABMA Standards STD 9-1990. Ratings are based

on fatigue life. The Rating Life or fatigue life at 90% reliability is the usual basis for bearing selection. Series U200, Y200, and hex, square and round bore bearings have wide inner rings for load ; however, the S200 and W200 series are extended on one side only for compactness and low cost. In combination with its companion line of economically designed housings, this series is applicable to light or moderate duty requirements.Where non-relubricatable bearings are used, bearing life is often

Bearing Selection Step 1

Step 2

Determine an appropriate L₁₀ design life. Operating time, Type of service hours per year Light seasonal usage 500 to 750 Heavy seasonal usage 1,400 to 1,600 Industrial—8 hour shift 2,000

Determine a required

Design life, years 3-5 4-6 10

L₁₀ design life, hours 3,000 8,000 20,000

from Table 1.

Step 3 Calculate the required C and select a ball bearing. a For radial load only: P = Fr required C =

P using

from Step 2

Select a ball bearing from Table 3, page B-11 with a basic load rating C equal to or greater than the required C. b For combined radial and thrust loads when P = Fr required C =

P using

is 0.19 or less:

from Step 2

Select a ball bearing from Table 3, page B-11 with a basic load rating C equal to or greater than the required C. c For combined radial and thrust loads when use the following trial method: Maximum P = .56Fr + 2.30Fa Maximum required C =

P using

is greater than 0.19,

from Step 2

Select a trial ball bearing with a basic load rating C from Table 3, page B-11, approximately equal to the maximum required C. With this trial bearing calculate: Determine X and Y from Table 2. Calculate P for the trial bearing. P = XFr + YFa required C =

P for the trial bearing using

from Step 2.

Consult Table 3, page B-11, basic load rating. If a smaller bearing meets or nearly meets the required C, its life expectancy can be calculated. Note: If the load P is greater than .25C for series U200, Y200, hex, square, and round bore bearings or greater than .15C for series S200 and W200, consult Link-Belt Bearing Division, Rexnord Corp. B-9

limited by grease life, which is in turn affected by operating conditions. Also, economically designed housings must be applied within proportionate load limits. To assure a satisfactory bearing application, fitting practice, mounting, lubrication, sealing, static rating, housing strength, operating conditions and maintenance must be considered. For radial load applications only, Table 4, page B-12, can be used to select a bearing or to determine life expectancy.

Selection

Ball Bearings and Ball Bearing Units symbols for formulas: C Co e Fa Fr L₁₀ n P X Y

= = = = = = = = = =

basic formulas: L₁₀ u n u 60 = 1,000,000

basic load rating, pounds (or newtons) static load rating, pounds (or newtons) a reference value thrust load, pounds (or newtons) radial load, pounds (or newtons) rating life, hours speed, revolutions per minute equivalent radial load, pounds (or newtons) radial factor thrust factor

³ L₁₀ =

Step 1 a b Step 2

ratio Speed, n 50

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

2.08 2.29 2.46 2.62 2.88 3.10 3.30 3.47 3.63 3.77 3.91 4.21 4.47 4.71 4.92 5.12 5.30 5.64 5.93 6.20 6.45 6.68 7.65 8.42

100

200

300

400

500

600

700

800

2.62 2.88 3.10 3.30 3.63 3.91 4.15 4.37 4.57 4.75 4.92 5.30 5.64 5.93 6.20 6.45 6.68 7.10 7.47 7.81 8.13 8.42 9.63 10.6

3.30 3.63 3.91 4.15 4.57 4.92 5.23 5.51 5.76 5.99 6.20 6.68 7.10 7.47 7.81 8.13 8.42 8.94 9.41 9.84 10.2 10.6 12.1 13.4

3.77 4.15 4.47 4.75 5.23 5.64 5.99 6.30 6.59 6.86 7.10 7.65 8.13 8.55 8.94 9.30 9.63 10.2 10.8 11.3 11.7 12.1 13.9 15.3

4.15 4.57 4.92 5.23 5.76 6.20 6.59 6.94 7.25 7.54 7.81 8.42 8.94 9.41 9.84 10.2 10.6 11.3 11.9 12.4 12.9 13.4 15.3 16.8

4.47 4.92 5.30 5.64 6.20 6.68 7.10 7.47 7.81 8.13 8.42 9.07 9.63 10.1 10.6 11.0 11.4 12.1 12.8 13.4 13.9 14.4 16.5 18.1

4.75 5.23 5.64 5.99 6.59 7.10 7.54 7.94 8.30 8.63 8.94 9.63 10.2 10.8 11.3 11.7 12.1 12.9 13.6 14.2 14.8 15.3 17.5 19.3

5.01 5.51 5.93 6.30 6.94 7.47 7.94 8.36 8.74 9.09 9.41 10.1 10.8 11.3 11.9 12.3 12.8 13.6 14.3 14.9 15.5 16.1 18.4 20.3

5.23 5.76 6.20 6.59 7.25 7.81 8.30 8.74 9.14 9.50 9.84 10.6 11.3 11.9 12.4 12.9 13.4 14.2 14.9 15.6 16.2 16.8 19.3 21.2

2400 7.54 8.30 8.94 9.50 10.5 11.3 12.0 12.6 13.2 13.7 14.2 15.3 16.2 17.1 17.9 18.6 19.3 20.5 21.5 22.5 23.4 24.3 27.8 30.5

3600 8.63 9.50 10.2 10.9 12.0 12.9 13.7 14.4 15.1 15.7 16.2 17.5 18.6 19.6 20.5 21.3 22.0 23.4 24.6 25.8 26.8 27.8 31.8 35.0

6000 10000 10.2 12.1 11.3 13.4 12.1 14.4 12.9 15.3 14.2 16.8 15.3 18.1 16.2 19.3 17.1 20.3 17.9 21.2 18.6 22.0 19.3 22.8 20.7 24.6 22.0 26.1 23.2 27.5 24.3 28.7 25.2 29.9 26.1 31.0 27.8 32.9 29.2 34.6 30.5 36.2 31.8 37.7 32.9 39.0 37.7 44.6 41.4 49.1

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

1000 5.64 6.20 6.68 7.10 7.81 8.42 8.94 9.41 9.84 10.2 10.6 11.4 12.1 12.8 13.4 13.9 14.4 15.3 16.1 16.8 17.5 18.1 20.7 22.8

1200 5.99 6.59 7.10 7.54 8.30 8.94 9.50 10.0 10.5 10.9 11.3 12.1 12.9 13.6 14.2 14.8 15.3 16.2 17.1 17.9 18.6 19.3 22.0 24.3

1500 6.45 7.10 7.65 8.13 8.94 9.63 10.2 10.8 11.3 11.7 12.1 13.1 13.9 14.6 15.3 15.9 16.5 17.5 18.4 19.3 20.0 20.7 23.7 26.1

1800 6.86 7.54 8.13 8.63 9.50 10.2 10.9 11.4 12.0 12.4 12.9 13.9 14.8 15.5 16.2 16.9 17.5 18.6 19.6 20.5 21.3 22.0 25.2 27.8

Step 3

To calculate the Rating Life L₁₀ of any selected or trial bearing: Determine the equivalent radial load P. For radial load only: P = Fr For combined radial and thrust load: P = XFr + YFa using X and Y from Table 2 below. Calculate the ratio of basic load rating C to the equivalent radial load. C P Approximate the bearing life from Table 1.

Table 2 • X and Y factors for ball bearings ≤ e

L e

e .19 .21 .22 .24

X 1.0 1.0 1.0 1.0

Y 0 0 0 0

X .56 .56 .56 .56

Y 2.30 2.15 1.99 1.85

100 125 150 200

.26 .27 .28 .30

1.0 1.0 1.0 1.0

0 0 0 0

.56 .56 .56 .56

1.71 1.63 1.56 1.45

300 500 750 1000

.34 .38 .42 .44

1.0 1.0 1.0 1.0

0 0 0 0

.56 .56 .56 .56

1.31 1.15 1.04 1.00

25 37.5 50 75

For values between those in the table linear interpolation can be used.

Life Adjustment

Speed, n 900 5.44 5.99 6.45 6.86 7.54 8.13 8.63 9.09 9.50 9.88 10.2 11.0 11.7 12.3 12.9 13.4 13.9 14.8 15.5 16.2 16.9 17.5 20.0 22.0

u 1,000,000 n u 60

Life Expectancy

Table 1 • Relation of L₁₀ life and speed to Bearing life, hours L₁₀

¹⁄₃

The Rating Life, L₁₀, may be modified for some applications in accordance with the formula Ln, = a₁a₂a₃L₁₀ where Ln, = Adjusted life for (100-n) % reliablility, a₁ = Life adjustment factor for reliability a₂ = Life adjustment factor for material and processing a₃ = Life adjustment factor for operating conditions. For most normal applications, all factors will be taken as 1, and the Rating Life used as the selection basis or life estimate. In addition, as long as standard catalog bearings are used, a₂ will be normally set equal to one. The factor a₃ covers such things as lubrication, misalignment, and temperature. Some conditions that could yield a₃ significantly different than unity include speeds less than 20000 DN or greater than 200000 DN, temperatures below –40°F (–40°C) or above 275°F (135°C), or misalignment greater than 0.0005 radians. For other possible conditions, as well as additional information on life adjustment factors, consult Link-Belt Bearing Division, Rexnord Corp. B-10

Load Ratings

Ball Bearings and Ball Bearing Units Table 3 • Load ratings, speed limits and ball data Bearing Size Number S200 U200 W200 Y200

Hex Square Round

2B08 210 211 2M17

C₀ Static load rating

C Static load rating

d Ball diameter

Approximate speed limit RPM V

N Number of balls

Nd2

pounds

Felt seals

N & E seals‡

8 100

1820

...

9000

12000

...

¹⁹⁄₆₄

7

.617

1480

9 830

2210

...

7500

10000

...

⁵⁄₁₆

8

.781

7 830

1760

10 810

2430

...

6800

9600

1000

⁵⁄₁₆

9

.879

206

11 300

2530

15 030

3380

...

5600

8000

...

³⁄₈

9

1.27

220 222 223 2M35

207

15 300

3440

19 880

4470

...

4800

6850

700

⁷⁄₁₆

9

1.72

224 2M40

208

19 900

4460

25 100

5640

...

4500

6000

650

¹⁄₂

9

2.25

226 227 228 2M45

209

20 400

4590

25 220

5670

...

4000

5330

600

¹⁄₂

9

2.25

231 2E32 2M50

210

23 200

5220

27 090

6090

...

3600

4800

550

¹⁄₂

10

2.50

232 235 2M55

211

29 200

6570

33 540

7540

...

3200

4360

500

⁹⁄₁₆

10

3.16

236 238 239 2M60

...

36 000

8080

40 520

9110

...

3000

4000

...

⁵⁄₈

10

3.91

240 243 2M65

...

40 100

9010

44 220

9940

3690

3850

...

...

²¹⁄₃₂

10

4.31

244 247 2E48 2M75

...

49 200

11100

51 600

11600

3200

3300

...

...

¹¹⁄₁₆

11

5.20

255 2E56 2M85

...

63 600

14300

64 500

14500

2800

2950

...

...

²⁵⁄₃₂

11

6.71

263 2E64 2M100

...

92 900

20900

94 300

21200

2400

2500

...

...

1

10

10.0

newtons

pounds

newtons

...

4 940

1110

212 2M20

204

6 590

214 215 216 2M25

205

218 219 2E20 2M30

If the load P is greater than .15C for S200 and W200 or .25C all others, consult Link-Belt Bearing Division, Rexnord Corp. V Based on grease lubrication and moderate load. Additional information, page B-75.

B-11

H seals

E3 seals

inches

‡ N & E seals operation at higher speeds up to H seal speed limit is allowable providing the lip seal friction does not result in operating temperatures over 225°F (107°C).

Load Ratings

Ball Bearings and Ball Bearing Units Table 4 • Radial load ratings in pounds at various RPM for appropriate L₁₀ life hours Bearing Size Number S200 Hex U200 Square W200 Round Y200

Radial load ratings, pounds

L₁₀ Minimum life, hours

50

100

200

300

400

500

600

700

800

900 1000 1200 1500 1800 2000 2500 3000 3500 4000 5000

…

3000 8000 20000 40000 100000

… … … 374 271

… … 373 298 215

… 404 298 238 171

… 353 260 209 149

444 320 238 189 136

413 298 222 176 126

387 382 209 166 119

367 267 198 158 113

353 256 189 152 108

338 245 182 146 104

327 236 176 141 100

309 223 166 133 94

287 209 154 124 87

269 196 146 116 82

262 191 141 113 79

243 176 131 105 74

229 166 123 94 69

218 158 118 89 66

209 152 113 86 63

194 141 105 79 58

212 2M20

204

3000 8000 20000 40000 100000

… … … 454 331

… … 451 361 263

… 489 361 288 209

… 427 314 253 182

538 387 288 228 166

500 361 268 213 154

469 341 253 201 145

445 323 239 191 137

427 310 228 183 131

409 297 220 176 126

396 286 213 170 122

374 270 201 160 115

348 253 186 149 107

325 237 176 140 100

317 230 170 136 97

295 213 158 127 90

277 201 149 119 85

264 191 142 114 80

253 183 136 109 77

235 170 126 96 71

214 215 216 2M25

205

3000 8000 20000 40000 100000

… … … 498 364

… … 496 396 289

… 537 396 316 229

… 469 345 277 200

591 425 316 250 182

549 396 294 234 169

515 374 277 220 159

489 355 263 209 151

469 340 250 201 144

450 326 242 193 139

435 314 234 186 134

411 297 220 176 126

382 277 205 163 117

357 260 193 154 110

348 253 187 149 106

323 234 173 139 99

304 220 163 131 93

298 210 155 124 88

277 201 149 119 84

258 186 138 111 78

206

3000 8000 20000 40000 100000

… … … 691 505

… … 688 549 401

… 745 549 438 318

… 651 378 384 278

820 590 438 346 252

762 549 407 323 234

715 519 384 304 221

678 492 363 289 209

651 471 346 277 200

624 451 335 266 193

603 434 323 257 186

569 411 304 243 175

529 384 282 225 162

495 360 267 212 153

482 350 258 206 148

448 323 239 191 137

421 304 225 180 129

400 290 214 171 123

384 277 205 164 117

357 257 191 152 109

220 222 223 2M35

207

3000 8000 20000 40000 100000

… … … 912 668

… … 908 759 530

… 984 725 577 421

… 1080 1000 859 778 725 631 577 537 506 456 426 367 334 310

944 684 506 401 292

895 649 479 380 277

859 622 456 365 265

823 595 441 351 255

796 573 426 338 246

751 541 401 319 231

698 506 372 296 215

653 474 351 279 202

635 461 339 271 195

591 426 314 251 181

555 401 296 236 171

526 381 282 224 162

506 365 270 216 155

470 338 250 200 144

224 2M40

208

3000 8000 20000 40000 100000

… … … … … 1100 … 1020 816 1020 816 650 752 597 474

… 1220 1130 1060 1000 968 877 816 771 731 711 650 605 569 539 569 514 480 452 428 414 376 349 328 312

968 701 514 411 298

927 670 496 395 287

897 645 479 380 277

847 610 451 359 261

786 569 419 334 242

736 534 395 313 228

716 519 382 304 220

665 479 354 282 204

625 451 333 266 192

595 429 317 252 182

569 411 304 242 174

529 381 282 225 162

226 227 228 2M45

209

3000 8000 20000 40000 100000

… … … … … … 1240 1080 … 1150 918 799 1150 918 731 640 847 672 534 466

1270 1190 1130 1080 1040 1000 918 867 821 787 753 725 680 640 606 578 558 539 539 507 481 461 443 427 393 370 351 336 323 312

952 685 507 404 294

884 640 471 375 273

827 600 444 352 256

804 583 429 342 248

748 539 397 317 230

702 507 374 298 216

668 482 356 283 205

640 462 341 272 197

596 428 316 252 182

231 2E32 2M50

210

3000 8000 20000 40000 100000

… … … 1240 909

… … … 1470 1360 1280 1210 1160 1110 1080 1020 … 1330 1160 1050 985 931 882 845 809 778 736 1230 985 858 785 730 687 651 620 599 578 544 985 785 687 620 579 545 517 495 476 459 433 722 573 500 455 422 397 377 361 347 335 315

949 687 505 402 293

888 644 476 378 275

864 626 461 367 266

803 578 426 340 247

754 544 401 320 232

718 518 382 304 221

687 496 366 292 211

211

3000 8000 20000 40000 100000

… … … … 1820 1690 1580 1500 1440 1380 1340 1260 … … 1650 1440 1300 1210 1150 1090 1040 1000 963 910 … 1520 1210 1060 970 902 849 804 767 740 715 672 1530 1210 970 849 767 715 673 638 612 588 567 535 1126 894 710 620 563 523 492 467 447 430 415 391

1170 1090 1060 849 797 774 624 589 569 497 466 453 363 341 329

993 715 527 420 306

932 672 496 395 288

887 640 472 375 273

849 613 452 360 261

1410 1320 1290 1190 1120 1020 962 934 862 811 753 710 686 635 598 599 563 546 506 476 438 412 398 369 347

1070 772 569 452 330

2B08 210 211 2M17

218 219 2E20 2M30

232 235 2M55

Speed, RPM

1370 986 731 578 423

E3 SEALS U SEALS 236 238 239 2M60

…

3000 8000 20000 40000 100000

… … … 1850 1360

… … … 2200 2040 1910 1810 1740 1670 1610 1520 … 2000 1740 1580 1470 1390 1310 1260 1200 1160 1090 1840 1470 1280 1170 1080 1020 971 925 893 862 811 1470 1170 1020 925 863 812 770 738 709 684 645 1079 857 748 680 631 594 564 540 519 501 471 N & E SEALS

H SEALS 240 243 2M65

…

3000 8000 20000 40000 100000

244 247 2E48 2M75

…

3000 8000 20000 40000 100000

… … … … 2880 2600 2440 2310 2220 2120 2050 1940 1800 1680 1640 1520 1430 … … 2540 2220 2010 1870 1760 1670 1600 1530 1470 1390 1300 1220 1180 1090 1030 … 2340 1870 1620 1490 1380 1300 1230 1170 1130 1090 1030 957 903 873 808 760 2360 1870 1490 1300 1170 1090 1030 979 939 902 869 820 761 715 694 643 605 1732 1375 1091 953 866 804 756 719 687 661 638 600 557 524 506 470 442

…

3000 8000 20000 40000 100000

… … … … 3500 3250 3050 2890 2770 2650 2570 2420 2250 2100 2050 1900 … … 3180 2770 2510 2340 2200 2090 2000 1910 1840 1740 1620 1520 1480 1360 … 2930 2340 2030 1860 1730 1620 1540 1470 1410 1360 1280 1190 1120 1090 1000 2940 2340 1860 1620 1470 1370 1290 1220 1170 1120 1080 1020 950 892 866 803 2166 1719 1365 1192 1083 1005 946 899 860 827 798 751 697 656 633 588

3000 8000 20000 40000 100000

… … … … 5110 4750 4450 4220 4050 3880 3750 3540 3290 3070 2990 … … 4640 4050 3670 3410 3220 3050 2930 2800 2690 2540 2370 2230 2160 … 4280 3410 2970 2710 2520 2370 2250 2140 2070 2000 1880 1740 1640 1590 4300 3410 2710 2370 2140 2000 1880 1780 1710 1640 1580 1490 1380 1300 1260 3168 2514 1996 1743 1584 1470 1384 1314 1257 1209 1167 1098 1019 959 926

255 2E56 2M85

263 2E64 2M100

… … … … 2400 2230 2090 1980 1900 1820 1760 1660 1540 1440 1400 1300 1220 1160 … … 2180 1900 1720 1600 1510 1430 1370 1310 1260 1190 1110 1040 1010 940 885 842 … 2010 1600 1390 1270 1180 1110 1050 1000 974 940 885 821 774 749 693 652 620 2020 1600 1270 1110 1000 941 886 840 805 773 746 704 653 613 595 552 519 493 1485 1178 935 817 742 689 649 616 589 567 547 515 478 450 434 403 379 360

Operation in the high speed shaded areas requires frequent relubrication. Heavy lines define recommended speed ranges of bearing and seal variations. If the load P is greater than .15C for S200 and W200 or .25C all others, consult Link-Belt Bearing Division, Rexnord Corp.

B-12

Corrosion Resistant

Klean-Gard™ Flanged Unit KF-S200, KLF-S200 Reinforced Polyamide or Polypropylene Housing 4-bolt Mounting Alignable Spring Locking Stainless Steel Bushing and Washers Prelubricated with Food Grade Grease Relubricatable Inner & Outer Rings with Black Oxide Coating

Basic Unit

Open Unit With Auxiliary Seals

KF-S200

KF-S200D

Closed Unit With End Cap and Seal

KF-S200DC

Dimensions (inches/mm) Shaft Diameter mm

inches

Flanged Unit Number Polyamide

1

KF-S216 KF-S2M25

KLF-S216 KLF-S2M25

1³⁄₁₆ 1¹⁄₄

KF-S219 KF-S2E20 KF-S2M30

KLF-S219 KLF-S2E20 KLF-S2M30

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

KF-S220 KF-S222 KF-S223 KF-S2M35

KLF-S220 KLF-S222 KLF-S223 KLF-S2M35

1¹⁄₂

KF-S224 KF-S2M40

KLF-S224 KLF-S2M40

25

30

35 40

H

J

K

L

Replacement Bearing Number

³⁄₈ 10

⁷⁄₈ 22.5

1⁶¹⁄₆₄ 49.5

1⁷⁄₈ 47.5

1¹⁵⁄₃₂ 37.3

SG216ELK82/99A SG2M25ELK82/99A

4²¹⁄₆₄

³⁄₈

1¹⁄₆₄

2¹¹⁄₆₄

2³⁄₃₂

1³⁄₄

34.13

110

10

26

55

53

44.2

SG219ELK82/99A SG2E20ELK82/99A SG2M30ELK82/99A

1⁹⁄₁₆

4²³⁄₃₂

³⁄₈

1¹⁄₆₄

2²¹⁄₆₄

2¹⁄₄

1⁷⁄₈

B

D

E

2.756 70

1³⁄₁₆ 30.17

3⁵⁵⁄₆₄ 98

3.268

1¹¹⁄₃₂

83 3.622

PolypropyleneG

F Bolts

92

39.67

120

10

26

59

57

47.7

SG220ELK82/99A SG222ELK82/99A SG223ELK82/99A SG2M35ELK82/99A

4.016 102

1¹¹⁄₁₆ 42.87

5⁵⁄₃₂ 131

³⁄₈ 10

1³⁄₁₆ 30

2³⁷⁄₆₄ 65.5

2¹⁵⁄₃₂ 62.5

2¹⁄₁₆ 52.4


Corrosion Resistant

Klean-Gard™ Flanged Units KFX-S200, KLFX-S200 Reinforced Polyamide or Polypropylene Housing 2-bolt Mounting Alignable Spring Locking Stainless Steel Bushing and Washers Prelubricated with Food Grade Grease Relubricatable Inner & Outer Rings with Black Oxide Coating

Basic Unit


KFX-S200

KFX-S200D


KFX-S200DC


inches

Polyamide

A

B

D

F Bolts

PolypropyleneG

J

K

L

N


KFX-S212 KFX-S2M20

KLFX-S212 KLFX-S2M20

2⁷⁄₁₆ 62

3.543 90

1¹⁄₈ 28.58

³⁄₈ 10

⁵¹⁄₆₄ 20

1¹³⁄₁₆ 46

1¹¹⁄₁₆ 43

1²³⁄₆₄ 34.3

4⁹⁄₁₆ 116


1

KFX-S216 KFX-S2M25


2¹³⁄₁₆ 71

3.898 99

1³⁄₁₆ 30.17

³⁄₈ 10

⁷⁄₈ 22.5

1⁶¹⁄₆₄ 49.5

1⁷⁄₈ 47.5

1¹⁵⁄₃₂ 37.3

5¹⁄₈ 130


1³⁄₁₆ 1¹⁄₄

KFX-S219 KFX-S2E20 KFX-S2M30

KLFX-S219 KLFX-S2E20 KLFX-S2M30

3¹¹⁄₃₂

4.606

1¹¹⁄₃₂

³⁄₈

1¹⁄₆₄

2¹¹⁄₆₄

2³⁄₃₂

1³⁄₄

5⁵³⁄₆₄

85

117

34.13

10

26

55

53

44.2

148


1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

KFX-S220 KFX-S222 KFX-S223 KFX-S2M35

KLFX-S220 KLFX-S222 KLFX-S223 KLFX-S2M35

3²¹⁄₃₂

5.118

1⁹⁄₁₆

³⁄₈

1¹⁄₆₄

2²¹⁄₆₄

2¹⁄₄

1⁷⁄₈

6³⁄₈

93

130

39.67

10

26

59

57

47.7

162


1¹⁄₂

KFX-S224 KFX-S2M40


4¹⁄₆₄ 102

5.672 144

1¹¹⁄₁₆ 42.87

³⁄₈ 10

1³⁄₁₆ 30

2³⁷⁄₆₄ 65.5

2¹⁵⁄₃₂ 62.5

2¹⁄₁₆ 52.4

6⁵⁹⁄₆₄ 176


25

30

35

See footnotes and Housing Load Ratings on facing page.

B-13

H

³⁄₄ 20

40

Flanged Unit Number

Corrosion Resistant

Klean-Gard™ Pillow Block KP-S200, KLP-S200 Reinforced Polyamide or Polypropylene Housing Alignable Spring Locking Stainless Steel Bushing and Washers Prelubricated with Food Grade Grease Relubricatable Inner & Outer Rings with Black Oxide Coating

Basic Unit



KP-S200

KP-S200D

KP-S200DC


inches

Pillow Block Number Polyamide

A

B

C

D

E

F Bolts

PolypropyleneG

H

J

L

S

W

Z


³⁄₄

KP-S212 KP-S2M20

KLP-S212 KLP-S2M20

1⁵⁄₁₆ 33.3

3²⁵⁄₃₂ 96.0

5¹⁄₃₂ 128.0

1¹⁄₈ 28.58

1³⁄₁₆ 30

³⁄₈ 10

⁴³⁄₆₄ 17

³⁄₄ 19

3¹⁄₃₂ 77

⁷⁄₈ 22.0

1⁷⁄₃₂ 30.8

1¹⁄₈ 28.8


1

KP-S216 KP-S2M25

KLP-S216 KLP-S2M25

1⁷⁄₁₆ 36.5

4¹¹⁄₆₄ 106.0

5³¹⁄₆₄ 140.0

1³⁄₁₆ 30.17

1²³⁄₆₄ 34.5

³⁄₈ 10

⁴³⁄₆₄ 17

¹³⁄₁₆ 20.6

3¹¹⁄₃₂ 85

⁷⁄₈ 22.0

1⁹⁄₃₂ 32.7

1¹³⁄₆₄ 30.7


1³⁄₁₆ 1¹⁄₄

KP-S219 KP-S2E20 KP-S2M30

KLP-S219 KLP-S2E20 KLP-S2M30

1¹¹⁄₁₆

4⁴⁹⁄₆₄

6²⁷⁄₆₄

1¹¹⁄₃₂

1²⁷⁄₆₄

¹⁄₂

²⁵⁄₃₂

⁶¹⁄₆₄

3 ⁵⁵⁄₆₄

¹⁵⁄₁₆

1³⁄₈

1¹⁹⁄₆₄

42.9

121.0

163.0

34.13

36

12

20

24.2

98

24.0

35

33


1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

KP-S220 KP-S222 KP-S223 KP-S2M35

KLP-S220 KLP-S222 KLP-S223 KLP-S2M35

1⁷⁄₈

4³¹⁄₃₂

6³⁷⁄₆₄

1⁹⁄₁₆

1³³⁄₆₄

¹⁄₂

²⁵⁄₃₂

1⁷⁄₆₄

4¹⁄₄

¹⁵⁄₁₆

1⁹⁄₁₆

1¹⁵⁄₃₂

1¹⁄₂

KP-S224 KP-S2M40

KLP-S224 KLP-S2M40

20 25

30

35 40

47.6

126.0

167.0

39.67

38.6

12

20

28.2

108

24.0

39.5

37.5


2 50.8

5¹¹⁄₃₂ 136

7⁹⁄₃₂ 185.0

1¹¹⁄₁₆ 42.87

1³³⁄₆₄ 38.6

¹⁄₂ 12

²⁵⁄₃₂ 20

1¹³⁄₆₄ 30.6

4¹³⁄₃₂ 112

¹⁵⁄₁₆ 24.0

1⁴¹⁄₆₄ 41.6

1⁹⁄₁₆ 39.6


Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, Rp ¹⁄₈ parallel thread per ISO 7/1 latest revision. Note: ¹⁄₈" PT external thread will not fit. G Furnished with Viton seals and o-ring and AISI 316 stainless steel bushings and washers. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

Load ratings for bearings and housings Shaft Diameter mm

Bearing Load Ratings*

Maximum Recommended Equivalent Radial Load *

Maximum Recommended Axial Load (1)

Dynamic C

Static C₀

³⁄₄

2210 lb 9830 N

1480 lb 6590 N

332 lb 1475 N

175 lb 778 N

1

2430 lb 10810 N

1760 lb 7830 N

365 lb 1622 N

175 lb 778 N

1³⁄₁₆ 1¹⁄₄

3380 lb 15030 N

2530 lb 11300 N

507 lb 2254 N

330 lb 1468 N

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

4470 lb 19880 N

3440 lb 15300 N

670 lb 2982 N

330 lb 1468 N

5640 lb 25100 N

4460 lb 19900 N

846 lb 3765 N

500 lb 2224 N

inches

20 25

P

E

F

a

30

35 1¹⁄₂ 40

* If actual bearing load exceeds maximum recommended equivalent radial load or impact loading will occur, consult Link-Belt Bearing Division, Rexnord Corporation. Housing should not be used under tension loads. For this reason, pillow blocks are designed to withstand loads directed into the base. Polymide and Polypropylene housing strength exceeds maximum recommended equivalent radial load. (1) Values based on set screw holding capacity for properly tightened set screws. These values may be used in design, as a safety factor has been applied.

B-14

Corrosion Resistant

Dura-Klean™ Pillow Blocks WP3-S200E Cast Iron Housing with Non-Porous Nylon Coating Standard Backing Alignable Spring Locking Prelubricated with Food Grade Grease Relubricable Inner & Outer Rings with Black Oxide Coating


Pillow block number

A

³⁄₄

WP3-S212E WP3-S2M20E

1⁵⁄₁₆ 33.34

⁷⁄₈ ¹⁵⁄₁₆ 1

WP3-S214E WP3-S215E WP3-S216E WP3-S2M25E

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

WP3-S218E WP3-S219E WP3-S2E20E WP3-S2M30E

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

WP3-S220E WP3-S222E WP3-S223E WP3-S2M35E

1⁷⁄₈

4¹⁵⁄₁₆

6³⁄₈

1⁹⁄₁₆

1⁷⁄₈

¹⁄₂

¹³⁄₁₆

3¹¹⁄₁₆

¹³⁄₁₆

1⁷⁄₆₄

47.62

125.4

161.9

39.67

47.6

12

20.6

93.7

20.6

28.2

WP3-S224E WP3-S2M40E

2 50.80

5³⁄₈ 136.5

7¹⁄₁₆ 179.4

1¹¹⁄₁₆ 42.87

1⁷⁄₈ 47.6

¹⁄₂ 12

¹³⁄₁₆ 20.6

4 101.6

¹⁵⁄₁₆ 23.8

1¹³⁄₆₄ 30.6

4.4

WP3-S226E WP3-S227E WP3-S228E

2¹⁄₈

⁵⁄₈

7¹⁄₄

1⁴⁹⁄₆₄

2

¹⁄₂

¹³⁄₁₆

4⁵⁄₁₆

⁷⁄₈

1¹⁵⁄₆₄

5.1 5.0 4.9

inches

20

25

30

35 1¹⁄₂ 40 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 1¹⁵⁄₁₆

WP3-S231E

C

D

E

F Bolts

H

L

S

U

Unit Wt. (lbs./kg)

3⁷⁄₈ 98.4

5¹⁄₈ 130.2

1¹⁄₈ 28.58

1¹⁄₂ 38.1

³⁄₈ 10

¹⁄₂ 12.7

2¹⁹⁄₃₂ 65.9

¹¹⁄₁₆ 17.5

³⁄₄ 19.0

1.5 .68


1⁷⁄₁₆

4

5³⁄₈

1³⁄₁₆

1⁵⁄₈

³⁄₈

⁹⁄₁₆

2⁷⁄₈

¹¹⁄₁₆

¹³⁄₁₆

1.7 1.6 1.6

36.51

101.6

136.5

30.17

41.3

10

14.3

73.0

17.5

20.6

.73


1.18

SG218ELK82/99A SG219ELK82/99A SG2E20ELK82/99A SG2M30ELK82/99A

1.50


2.00


B

†

1¹¹⁄₁₆

4⁵⁄₈

6⁵⁄₁₆

1¹¹⁄₃₂

1³⁄₄

¹⁄₂

¹¹⁄₁₆

3⁵⁄₁₆

¹⁵⁄₁₆

⁶¹⁄₆₄

42.86

117.5

160.3

34.13

44.4

12

17.5

84.1

23.8

24.2

53.98

142.9

184.2

44.85

50.8

12

20.6

109.5

22.2

31.4

2¹⁄₄ 57.15

6³⁄₁₆ 157.2

7⁷⁄₈ 200.0

1⁵¹⁄₆₄ 45.64

2¹⁄₈ 54.0

⁵⁄₈ 16

⁷⁄₈ 22.2

4¹⁄₂ 114.3

¹⁵⁄₁₆ 23.8

1¹⁷⁄₆₄ 32.1

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. †Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-15

2.6 2.6 2.6 3.4 3.4 3.3

Replacement bearing no.

SG226ELK82/99A SG227ELK82/99A SG228ELK82/99A 2.22

5.8 2.63

SG231ELK82/99A

Corrosion Resistant

Dura-Klean™ Pillow Blocks WPT3-S200E Cast Iron Housing with Non-Porous Nylon Coating Standard Backing Tapped Base Alignable Spring Locking Prelubricated with Food Grade Grease Relubricable Inner & Outer Rings with Black Oxide Coating


Pillow block number

A

WPT3-S212E WPT3-S2M20E

1⁵⁄₁₆ 33.34

2 50.80

2⁷⁄₈ 73.0

1¹⁄₈ 28.58

1⁷⁄₁₆

2

2⁷⁄₈

36.51

50.80

73.0

inches ³⁄₄

20 ⁷⁄₈ ¹⁵⁄₁₆ 1

WPT3-S214E WPT3-S215E WPT3-S216E WPT3-S2M25E

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

WPT3-S218E WPT3-S219E WPT3-S2E20E WPT3-S2M30E

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

WPT3-S220E WPT3-S222E WPT3-S223E WPT3-S2M35E

25

30

35 1¹⁵⁄₁₆

WPT3-S231E

B

C

D

F

L

N

U

¹⁄₂ 12.7

2¹⁹⁄₃₂ 65.9

1¹⁄₈ 28.6

³⁄₄ 19.0

1.0

³⁄₈-16

¹⁄₂

2⁷⁄₈

1⁵⁄₁₆

¹³⁄₁₆

1.3 1.3 1.2

—

12.7

73.0

33.3

20.6

E

†

Tap

Min. Depth

1¹⁄₂ 38.1

³⁄₈-16 —

1³⁄₁₆

1¹⁄₂

30.17

38.1

1¹¹⁄₁₆

3

4

1¹¹⁄₃₂

1¹⁄₂

⁷⁄₈-14

⁵⁄₈

3⁵⁄₁₆

1¹⁹⁄₃₂

⁶¹⁄₆₄

42.86

76.20

101.6

34.13

38.1

—

15.9

84.1

40.5

24.2

1⁷⁄₈

3¹⁄₄

4¹³⁄₃₂

1⁹⁄₁₆

1⁷⁄₈

¹⁄₂-13

³⁄₄

3¹¹⁄₁₆

1²⁷⁄₃₂

1⁷⁄₆₄

47.62

82.55

111.9

39.67

47.6

—

19.0

93.7

46.9

28.2

2¹⁄₄ 57.15

4 101.60

5⁷⁄₁₆ 138.1

1¹¹⁄₁₆ 42.87

2 50.8

⁵⁄₈-11 —

⁷⁄₈ 22.2

4¹⁄₂ 114.3

2¹⁵⁄₃₂ 62.7

1¹³⁄₆₄ 30.6

Unit wt. (lbs./kg)

Bearing no.

.45


.54


1.00


1.36


2.3 2.3 2.2 3.1 3.1 3.0 5.3 2.36

SG231ELK82/99A

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-16

Corrosion Resistant

Dura-Klean™ Flanged Units WFX3-S200E Cast Iron Housing with Non-Porous Nylon Coating 2-bolt Mounting Alignable Prelubricated with Food Grade Grease Relubricable Inner & Outer Rings with Black Oxide Coating


Flanged unit number

A

B

D

F Bolts

G

H

L

N

P

inches ³⁄₄

20 ⁷⁄₈ ¹⁵⁄₁₆ 1 25

WFX3-S212E WFX3-S2M20E WFX3-S214E WFX3-S215E WFX3-S216E WFX3-S2M25E

2⁷⁄₁₆ 61.9

3¹⁷⁄₃₂ 89.69

1¹⁄₈ 28.58

³⁄₈ 10

²³⁄₆₄ 9.1

⁹⁄₁₆ 14.3

1³¹⁄₆₄ 37.7

4¹³⁄₃₂ 111.9

⁹⁄₃₂ 7.1

1.1

2¹¹⁄₁₆

3⁵⁷⁄₆₄

1³⁄₁₆

⁷⁄₁₆

³⁄₈

¹⁹⁄₃₂

1⁹⁄₁₆

4²⁹⁄₃₂

⁵⁄₁₆

1.5 1.5 1.4

68.3

98.82

30.17

10

9.5

15.1

39.7

124.6

7.9

3³⁄₁₆

4¹⁹⁄₃₂

1¹¹⁄₃₂

⁷⁄₁₆

²⁵⁄₆₄

¹⁹⁄₃₂

1⁴⁷⁄₆₄

5¹⁹⁄₃₂

²⁷⁄₆₄

81.0

116.68

34.13

10

9.9

15.1

44.0

142.1

10.7

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

WFX3-S218E WFX3-S219E WFX3-S2E20E WFX3-S2M30E

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

WFX3-S220E WFX3-S222E WFX3-S223E WFX3-S2M35E

3⁵⁄₈

5¹⁄₈

92.1

130.18

39.69

12

9.1

15.9

48.8

155.6

13.1

1¹⁄₂

WFX3-S224E WFX3-S2M40E

4 5²¹⁄₃₂ 101.6 143.67

1¹¹⁄₁₆ 42.87

¹⁄₂ 12

²⁷⁄₆₄ 10.7

⁵⁄₈ 15.9

2⁷⁄₆₄ 53.6

6²⁵⁄₃₂ 172.2

¹⁷⁄₃₂ 1.5

3.8

WFX3-S226E WFX3-S227E WFX3-S228E

4¹⁄₄

1⁴⁹⁄₆₄

¹⁄₂

³⁄₈

⁵⁄₈

2⁹⁄₆₄

7³⁄₃₂

³⁵⁄₆₄

4.4 4.4 4.3

30

35 40 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 1¹⁵⁄₁₆

WFX3-S231E

5²⁷⁄₃₂

1⁹⁄₁₆

¹⁄₂

²³⁄₆₄

⁵⁄₈

1⁵⁹⁄₆₄

6¹⁄₈

³³⁄₆₄

108.0 148.43

44.85

12

9.5

15.9

54.4

180.2

13.9

4⁹⁄₁₆ 6³⁄₁₆ 115.9 157.16

1⁵¹⁄₆₄ 45.64

⁹⁄₁₆ 14

¹⁹⁄₃₂ 15.1

³⁄₄ 19.0

2²⁵⁄₆₄ 60.7

7⁷⁄₁₆ 188.9

³⁵⁄₆₄ 13.9

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-17

Unit wt. (lbs./kg)


.50


.64


.95


1.18


1.73


2.2 2.1 2.1 2.8 2.7 2.6

SG226ELK82/99A SG227ELK82/99A SG228ELK82/99A 1.95

5.6 2.54

SG231ELK82/99A

Corrosion Resistant

Dura-Klean™ Flanged Units WF3-S200E Cast Iron Housing with Non-Porous Nylon Coating 4-bolt Mounting Alignable Spring Locking Prelubricated with Food Grade Grease Relubricable Inner & Outer Rings with Black Oxide Coating


Flanged unit number

A

B

D

E

F Bolts

G

H

L

N

WF3-S212E WF3-S2M20E

2⁷⁄₁₆ 61.9

2¹⁄₂ 63.50

1¹⁄₈ 28.58

3³⁄₈ 85.7

³⁄₈ 10

²³⁄₆₄ 9.1

⁹⁄₁₆ 14.3

1³¹⁄₆₄ 37.7

4¹³⁄₃₂ 111.9

⁹⁄₃₂ 7.1

1.6

2¹¹⁄₁₆

2³⁄₄

1³⁄₁₆

3³⁄₄

⁷⁄₁₆

³⁄₈

¹⁹⁄₃₂

1⁹⁄₁₆

4²⁹⁄₃₂

⁵⁄₁₆

2.0 1.9 1.9

68.3

69.85

30.17

95.2

10

9.5

15.1

39.7

124.6

7.9

3³⁄₁₆

3¹⁄₄

1¹¹⁄₃₂

4¹⁄₄

⁷⁄₁₆

²⁵⁄₆₄

¹⁹⁄₃₂

1⁴⁷⁄₆₄

5¹⁹⁄₃₂

²⁷⁄₆₄

81.0

82.55

34.13

108.0

10

9.9

15.1

44.0

142.1

10.7

P

inches ³⁄₄

20 ⁷⁄₈ ¹⁵⁄₁₆ 1 25

WF3-S214E WF3-S215E WF3-S216E WF3-S2M25E

Unit wt. (lbs./kg)

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

WF3-S218E WF3-S219E WF3-S2E20E WF3-S2M30E

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

WF3-S220E WF3-S222E WF3-S223E WF3-S2M35E

3⁵⁄₈

3⁵⁄₈

1⁹⁄₁₆

4⁵⁄₈

¹⁄₂

²³⁄₆₄

⁵⁄₈

1⁵⁹⁄₆₄

6¹⁄₈

92.1

92.08

39.67

117.5

12

9.1

15.9

48.8

155.6

14.7

1¹⁄₂

WF3-S224E WF3-S2M40E

4 101.6

4 1¹¹⁄₁₆ 101.60 42.87

5¹⁄₈ 130.2

¹⁄₂ 12

²⁷⁄₆₄ 10.7

⁵⁄₈ 15.9

2⁷⁄₆₄ 53.6

6²⁵⁄₃₂ 172.2

¹⁷⁄₃₂ 13.5

4.7

WF3-S226E WF3-S227E WF3-S228E

4¹⁄₄

4¹⁄₈

5³⁄₈

¹⁄₂

³⁄₈

⁵⁄₈

2⁹⁄₆₄

7³⁄₃₂

³⁵⁄₆₄

5.4 5.4 5.3

30

35 40 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 1¹⁵⁄₁₆

WF3-S231E

1⁴⁹⁄₆₄

³⁷⁄₆₄


.73


.86


1.18


1.50


2.13


2.7 2.6 2.6 3.5 3.4 3.3

SG226ELK82/99A SG227ELK82/99A SG228ELK82/99A

108.0

104.78 44.85

136.5

12

9.5

15.9

54.4

180.2

13.9

2.41

4¹⁄₂ 114.3

4³⁄₈ 1⁵¹⁄₆₄ 111.12 45.64

5⁵⁄₈ 142.9

¹⁄₂ 12

¹⁄₂ 12.7

2¹³⁄₁₆ 19.0

2¹⁹⁄₆₄ 58.3

7⁷⁄₁₆ 188.9

⁹⁄₁₆ 14.3

6.2 2.81

SG231ELK82/99A


B-18

Corrosion Resistant

Dura-Klean™ Flanged Bracket Units WFB3-S200E Cast Iron Housing with Non-Porous Nylon Coating 3-bolt Mounting Alignable Spring Locking Prelubricated with Food Grade Grease Relubricable Inner & Outer Rings with Black Oxide Coating


inches ³⁄₄

WFB3-S212E WFB3-S2M20E

⁷⁄₈ ¹⁵⁄₁₆ 1

WFB3-S214E WFB3-S215E WFB3-S216E WFB3-S2M25E

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

WFB3-S218E WFB3-S219E WFB3-S2E20E WFB3-S2M30E

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

WFB3-S220E WFB3-S222E WFB3-S223E WFB3-S2M35E

20

25

30

35

Flanged unit numbers

A

B

C

D

E

F Bolts

G

H

K

L

N

P

2¹⁄₂ 63.5

1¹¹⁄₁₆ ⁷⁄₈ 42.9 22.2

1¹⁄₈ 2³⁄₈ 28.58 60.3

³⁄₈ 10

⁷⁄₃₂ 1.6

⁵⁄₁₈ 7.9

3 76.2

1¹¹⁄₃₂ 34.1

4¹⁄₄ 108.0

¹¹⁄₃₂ 8.7

1¹⁄₂ 38.1

2³⁄₄

1¹³⁄₁₆ 1¹⁄₈

1³⁄₁₆

³⁄₈

⁹⁄₃₂

³⁄₈

3³⁄₈

1²⁹⁄₆₄

4³⁄₄

⁵⁄₁₆

1⁵⁄₈

69.8

46.0

28.6

30.17 63.5

10

2.4

9.5

85.7

38.9

120.6

7.5

41.3

3¹⁄₄

2¹⁄₁₆

1¹⁄₄

1¹¹⁄₃₂

³⁄₈

⁹⁄₃₂

³⁄₈

3³⁄₄

1⁵⁄₈

5³⁄₈

³⁄₈

1⁷⁄₈

82.6

52.3

31.8

34.13 69.8

10

1.6

9.5

95.2

43.7

136.5

9.5

47.6

3³⁄₄

2³⁄₈

1¹⁄₄

1⁹⁄₁₆

¹⁄₂

²³⁄₆₄

¹⁄₂

4¹⁄₄

1⁵⁹⁄₆₄

6¹⁄₈

³¹⁄₆₄

2

95.2

60.3

31.8

39.67 82.6

12

4.0

12.7

108.0

48.8

155.6

12.3

50.8

2¹⁄₂

2³⁄₄

3¹⁄₄

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₄"-28 UNF. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-19

U

Unit wt. (lbs./kg)

Bearing no.

1.2 .54


1.7 1.7 1.6 0.72


2.2 2.2 2.1 0.95


3.2 3.2 3.1 1.41


Corrosion Resistant

Dura-Klean™ Takeup Units Cast Iron Housing with Non-Porous Nylon Coating Wide Slot Design Alignable Spring Locking Prelubricated with Food Grade Grease Relubricable Inner & Outer Rings with Black Oxide Coating

Dimensions (inches/mm)

³⁄₄

WTH3-S212E 2²⁷⁄₃₂ WTH3-S2M20E 72.2

2¹⁄₄ 57.2

1¹⁄₈ 1⁷⁄₈ 28.58 47.6

1¹⁄₄ 31.8

³⁄₄ 3³¹⁄₃₂ 1¹⁄₁₆ 19.0 100.8 27.0

3⁵⁄₈ 92.1

N +.000" -.015" (+0.00 -0.38) 3.000 76.20

⁷⁄₈ ¹⁵⁄₁₆ 1

WTH3-S214E 2²⁹⁄₃₂ WTH3-S215E 73.8 WTH3-S216E WTH3-S2M25E

2¹⁄₄ 57.2

1³⁄₁₆ 1²⁷⁄₃₂ 1¹⁄₄ 30.17 46.8 31.8

³⁄₄ 4¹⁄₃₂ 1³⁄₃₂ 19.0 102.4 27.8

3⁵⁄₈ 92.1

3.000 76.20

1¹⁄₈ 1³⁄₄ 1¹⁄₄

WTH3-S218E 3¹¹⁄₃₂ WTH3-S219E 84.9 WTH3-S2E20E WTH3-S2M30E

2¹⁄₂ 1¹¹⁄₃₂ 2³⁄₁₆ 1⁷⁄₁₆ ⁷⁄₈ 4¹⁵⁄₃₂ 1³⁄₃₂ 63.5 34.13 55.6 36.5 22.2 113.5 27.8

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

WTH3-S220E 3¹¹⁄₁₆ WTH3-S222E 93.7 WTH3-S223E WTH3-S2M35E

2³⁄₄ 1⁹⁄₁₆ 2⁵⁄₁₆ 1⁷⁄₁₆ ⁷⁄₈ 4¹³⁄₁₆ 1³⁄₁₆ 4¹⁄₈ 3.500 69.8 39.67 58.7 36.5 22.2 122.2 30.2 104.8 88.90

1¹⁄₂

WTH3-S224E 4³⁄₁₆ WTH3-S2M40E 106.4

3¹⁄₄ 82.6

1¹¹⁄₁₆ 2²⁷⁄₃₂ 1¹⁵⁄₁₆ 1¹⁄₈ 5⁹⁄₁₆ 1⁵⁄₁₆ 42.87 72.2 49.2 28.6 141.3 33.3

4³⁄₄ 3.969 .688 ³⁄₄ 120.6 100.81 17.48 19.0

1¹³⁄₆₄ 30.6

3¹⁵⁄₃₂ 88.6

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

WTH3-S226E 4³⁄₁₆ WTH3-S227E 106.4 WTH3-S228E

3¹⁄₄ 82.6

1⁴⁹⁄₆₄ 2⁷⁄₈ 44.85 73.0

4³⁄₄ 3.969 .688 ³⁄₄ 120.6 100.81 17.48 19.0

1¹⁵⁄₆₄ 31.4

3¹⁵⁄₃₂ 88.6

1¹⁵⁄₁₆

WTH3-S231E

1¹⁵⁄₁₆ 1¹⁄₈ 5¹⁵⁄₁₆ 1⁴³⁄₆₄ 4³⁄₄ 3.969 .688 ³⁄₄ 49.2 28.6 150.8 42.5 120.6 100.81 17.48 19.0

1¹⁷⁄₆₄ 32.1

3¹⁹⁄₃₂ 91.3

Shaft Diameter mm

inches

20

25

30

35 40

Takeup unit number

A

C

D

F

G

H

J

K

L

Lip seals

4⁹⁄₁₆ 115.9

S +.005" T -.015" (+.013 -0.38) .531 ⁵⁄₈ 13.49 15.9

U

Y

Unit wt. (lbs./kg)

Bearing no.

³⁄₄ 19.0

2²¹⁄₃₂ 67.5

2.4 1.1


.531 ⁵⁄₈ 13.49 15.9

¹³⁄₁₆ 20.6

2²¹⁄₃₂ 67.5

2.7 1.2

3³⁄₈ 1⁵¹⁄₆₄ 2⁷⁄₈ 85.7 45.64 73.0

1¹⁵⁄₁₆ 1¹⁄₈ 5⁹⁄₁₆ 1³⁄₈ 49.2 28.6 141.3 34.9

4¹⁄₈ 3.500 104.8 88.90

.531 ⁵⁄₈ 13.49 15.9

⁶¹⁄₆₄ 24.2

2²⁷⁄₃₂ 72.2

.531 ⁵⁄₈ 1⁷⁄₆₄ 13.49 15.9 28.2

2³¹⁄₃₂ 75.4


3.2 1.5


4.0 1.8


5.3 2.4


5.3 2.4

SG226ELK82/99A SG227ELK82/99A SG228ELK82/99A

6.6 3.0

SG231ELK82/99A


B-20

Standard Duty Ball Bearing Pillow Blocks

P3-U200N Cast Iron Housing Standard Backing Height Alignable Spring Locking Relubricatable Wide Inner Ring Available in Nickel Plate k


inches

A †

Lip Seals

B

C

E

D

F Bolts

H

L

M Collar O.D.

U

W X

P3-U2B08N P3-U210N P3-U211N P3-U2M17N

1³⁄₁₆

3¹⁄₂

4⁵⁄₈

1³⁄₃₂

30.16

88.9

117.5

27.78

38.1

10

12.7

59.5

...

19.0

16.3

30.6

³⁄₄

P3-U212N P3-U2M20N

1⁵⁄₁₆ 33.34

3⁷⁄₈ 98.4

5¹⁄₈ 130.2

1⁹⁄₃₂ 32.54

1¹⁄₂ 38.1

³⁄₈ 10

¹⁄₂ 12.7

2¹⁹⁄₃₂ 65.9

... ...

¹¹⁄₁₆ 17.5

³⁄₄ 19.0

1¹⁹⁄₆₄ 32.9

1⁷⁄₁₆

4

5³⁄₈

1²³⁄₆₄

1⁵⁄₈

³⁄₈

⁹⁄₁₆

2⁷⁄₈

...

¹¹⁄₁₆

⁵¹⁄₆₄

1⁹⁄₃₂

36.51

101.6

136.5

34.53

41.3

10

14.3

73.0

...

17.5

20.2

32.5

1¹¹⁄₁₆

4⁵⁄₈

6⁵⁄₁₆

1⁹⁄₁₆

1³⁄₄

¹⁄₂

¹¹⁄₁₆

3⁵⁄₁₆

...

¹⁵⁄₁₆

⁶¹⁄₆₄

1²⁹⁄₆₄

42.86

117.5

160.3

39.69

44.4

12

17.5

84.1

...

23.8

24.2

36.9

20

1¹⁄₂

³⁄₈

¹⁄₂

2¹¹⁄₃₂

...

³⁄₄

⁴¹⁄₆₄

1¹³⁄₆₄

Unit wt. (lbs./kg) 1.1 1.0 1.0 0.5 0.8

UG212NL UG2M20NL

1.9 1.9 1.8 0.9

UG214NL UG215NL UG216NL UG2M25NL

2.8 2.7 2.7 1.2

UG218NL UG219NL UG2E20NL UG2M30NL

3.8 3.7 3.7 1.7


2.1

UG224NL UG2M40NL

2.3


2.6

UG231NL UG2E32NL UG2M50NL

3.5

UG232NL UG235NL UG2M55NL UG236NL UG238NL UG239NL UG2M60NL

1.7

P3-U214Ng P3-U215Ng P3-U216Ng P3-U2M25N

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

P3-U218N P3-U219N P3-U2E20N P3-U2M30N

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


1⁷⁄₈

4¹⁵⁄₁₆

6³⁄₈

1⁴⁹⁄₆₄

1⁷⁄₈

¹⁄₂

¹³⁄₁₆

3¹¹⁄₁₆

...

¹³⁄₁₆

1⁷⁄₆₄

1³⁵⁄₆₄

47.62

125.4

161.9

44.85

47.6

12

20.6

93.7

...

20.6

28.2

39.3

P3-U224Ng P3-U2M40Ng

2 50.80

5³⁄₈ 136.5

7¹⁄₁₆ 179.4

1²⁹⁄₃₂ 48.42

1⁷⁄₈ 47.6

¹⁄₂ 12

¹³⁄₁₆ 20.6

4 101.6

... ...

¹⁵⁄₁₆ 23.8

1¹¹⁄₆₄ 29.8

1⁴¹⁄₆₄ 41.7

4.7

2¹⁄₈

5⁵⁄₈

7¹⁄₄

2¹⁄₃₂

2

¹⁄₂

¹³⁄₁₆

4⁵⁄₁₆

...

⁷⁄₈

1¹⁵⁄₆₄

1²¹⁄₃₂

5.4 5.4 5.3

53.98

142.9

184.2

51.59

50.8

12

20.6

109.5

...

22.2

31.4

42.1

30

35 1¹⁄₂ 40 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


1¹⁵⁄₁₆ 2

P3-U231Ng P3-U2E32Ng P3-U2M50N

45

50 2 2³⁄₁₆

P3-U232Ng P3-U235Ng P3-U2M55N

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆

P3-U236N P3-U238N P3-U239N P3-U2M60N

2¹⁄₂ 2¹¹⁄₁₆

P3-U240N P3-U243N P3-U2M65N

55

60

65 2³⁄₄ 2¹⁵⁄₁₆ 3

P3-U244N P3-U247N P3-U2E48N P3-U2M75N

3⁷⁄₁₆ 3¹⁄₂

P3-U255N P3-U2E56N P3-U2M85N

3¹⁵⁄₁₆ 4

P3-U263N P3-U2E64N P3-U2M100N

75

85

2¹⁄₄

6³⁄₁₆

7⁷⁄₈

2³⁄₃₂

2¹⁄₈

⁵⁄₈

⁷⁄₈

4¹⁄₂

...

¹⁵⁄₁₆

1¹⁷⁄₆₄

1²⁵⁄₃₂

57.15

157.2

200.0

53.18

54.0

16

22.2

114.3

...

23.8

32.1

45.2

2¹⁄₂

6³⁄₄

9¹⁄₁₆

2¹⁄₄

2³⁄₈

⁵⁄₈

1

5

...

1⁵⁄₁₆

1¹³⁄₃₂

2¹⁄₆₄

63.50

171.4

230.2

57.15

60.3

16

25.4

127.0

...

33.3

35.7

51.2

Bearing no. UG2B08NL UG210NL UG211NL UG2M17NL

⁷⁄₈ ¹⁵⁄₁₆ 1 25

6.1 6.0 7.8 7.7 11.5 11.4 11.3

2¹¹⁄₁₆

7¹⁄₂

9¹⁄₂

2¹⁄₂

2¹⁄₂

⁵⁄₈

1¹⁄₈

5³⁄₈

...

1¹⁄₁₆

1⁹⁄₁₆

2⁷⁄₆₄

68.26

190.5

241.3

63.50

63.5

16

28.6

136.5

...

27.0

39.7

53.6

5.1 16.2 15.6 6.8

UG240NL UG243NL UG2M65NL

20.0 19.3 19.0 8.7


13.2


22.9


3

8¹⁄₈

10¹⁄₂

2¹¹⁄₁₆

2⁷⁄₈

³⁄₄

1⁵⁄₁₆

6

76.20

206.4

266.7

68.26

73.0

20

33.3

3¹⁄₄

8⁷⁄₈

11³⁄₄

2⁷⁄₈

3¹⁄₄

³⁄₄

82.55

225.4

298.4

73.02

82.6

20

4³⁄₁₆

1³⁄₁₆

1¹¹⁄₁₆

2¹⁄₁₆

152.4 106.4

30.2

42.9

52.4

1³⁄₈

6¹⁄₂

4⁵⁄₈

1⁵⁄₁₆

1¹³⁄₁₆

2⁷⁄₃₂

34.9

165.1

117.5

33.3

46.0

56.4

3³⁄₄

10

13

3⁹⁄₁₆

3¹⁄₂

⁷⁄₈

1⁵⁄₈

7⁷⁄₁₆

5³⁄₁₆

1⁵⁄₈

2¹⁄₈

2¹⁄₂

95.25

254.0

330.2

90.49

88.9

24

41.3

188.9

131.8

41.3

54.0

63.5

4⁷⁄₁₆

11⁷⁄₈

15¹⁄₄

4¹⁄₄

4¹⁄₄

⁷⁄₈

1¹³⁄₁₆

8⁷|₈

5¹⁵⁄₁₆

1⁷⁄₈

2³⁷⁄₆₄

3¹⁄₆₄

112.71

301.6

387.4

107.95

108.0

24

46.0

225.4

150.8

47.6

65.5

76.6

Bold face items are normally available from stock; please consult for availability of non-stock items. Shaft sizes over 2⁷⁄₁₆" have collars. Lubrication fitting tap size: for ¹¹⁄₁₆" (17 mm) and smaller shafts, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. K N lip seals standard. H labyrinth seals available. k Nickel plated housings available through size 239; add Suffix K75, i.e. P3-U2B08NK75. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). g Available with E3 triple lip seals.

B-21

S

¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆ 17

100

Pillow block number K

29.0 28.5 50.4 49.9

X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.


P3-Y200N Cast Iron Housing Standard Backing Height Alignable Eccentric Cam Locking Collar Relubricatable Wide Inner Ring

Dimensions (inches/mm) Shaft Diameter inches

Pillow block number K Lip Seals

A †

B

C

D

E

F Bolts

H

L

M

S

U

W X

Unit wt. (lbs./kg)

Bearing no.

¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

P3-Y2B08N P3-Y210N P3-Y211N

1³⁄₁₆ 30.16

3¹⁄₂ 88.9

4⁵⁄₈ 117.5

1¹⁵⁄₃₂ 37.31

1¹⁄₂ 38.1

³⁄₈ 10

¹⁄₂ 12.7

2¹¹⁄₃₂ 59.5

1¹⁄₈ 28.6

³⁄₄ 19.0

⁵⁹⁄₆₄ 23.4

1¹³⁄₆₄ 30.6

1.1

³⁄₄

P3-Y212N

1⁵⁄₁₆ 33.34

3⁷⁄₈ 98.4

5¹⁄₈ 130.2

1²³⁄₃₂ 43.66

1¹⁄₂ 38.1

³⁄₈ 10

¹⁄₂ 12.7

2¹⁹⁄₃₂ 65.9

1⁵⁄₁₆ 33.3

¹¹⁄₁₆ 17.5

1³⁄₆₄ 26.6

1¹⁹⁄₆₄ 32.9

1.8

⁷⁄₈ ¹⁵⁄₁₆ 1

P3-Y214Ng P3-Y215Ng P3-Y216Ng

1⁷⁄₁₆ 36.51

4 101.6

5³⁄₈ 136.5

1³⁄₄ 44.45

1⁵⁄₈ 41.3

³⁄₈ 10

⁹⁄₁₆ 14.3

2⁷⁄₈ 73.0

1¹⁄₂ 38.1

¹¹⁄₁₆ 17.5

1¹⁄₁₆ 27.0

1⁹⁄₃₂ 32.5

2.0 .91

YG214NL YG215NL YG216NL

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

P3-Y218N P3-Y219N P3-Y2E20N

1¹¹⁄₁₆ 42.86

4⁵⁄₈ 117.5

6⁵⁄₁₆ 160.3

1²⁹⁄₃₂ 48.42

1³⁄₄ 44.4

¹⁄₂ 12

¹¹⁄₁₆ 17.5

3⁵⁄₁₆ 84.1

1³⁄₄ 44.4

¹⁵⁄₁₆ 23.8

1³⁄₁₆ 30.2

1²⁹⁄₆₄ 36.9

2.8 1.27

YG218NL YG219NL YG2E20NL

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


1⁷⁄₈ 47.62

4¹⁵⁄₁₆ 125.4

6³⁄₈ 161.9

2¹⁄₆₄ 51.20

1⁷⁄₈ 47.6

¹⁄₂ 12

¹³⁄₁₆ 20.6

3¹¹⁄₁₆ 93.7

2³⁄₁₆ 55.6

¹³⁄₁₆ 20.6

1⁹⁄₃₂ 32.5

1³⁵⁄₆₄ 39.3

4.0 1.82


1¹⁄₂

P3-Y224Ng

2 50.80

5³⁄₈ 136.5

7¹⁄₁₆ 179.4

2⁷⁄₃₂ 56.36

1⁷⁄₈ 47.6

¹⁄₂ 12

¹³⁄₁₆ 20.6

4 101.6

2³⁄₈ 60.3

¹⁵⁄₁₆ 23.8

1³⁄₈ 34.9

1⁴¹⁄₆₄ 41.7

5.0

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


2¹⁄₈ 53.98

5⁵⁄₈ 142.9

7¹⁄₄ 184.2

2⁷⁄₃₂ 56.36

2 50.8

¹⁄₂ 12

¹³⁄₁₆ 20.6

4⁵⁄₁₆ 109.5

2¹⁄₂ 63.5

⁷⁄₈ 22.2

1³⁄₈ 34.9

1²¹⁄₃₂ 42.1

5.7

1¹⁵⁄₁₆ 2

P3-Y231Ng P3-Y2E32Ng

2¹⁄₄ 57.15

6³⁄₁₆ 157.2

7⁷⁄₈ 200.0

2¹⁵⁄₃₂ 62.71

2¹⁄₈ 54.0

⁵⁄₈ 16

⁷⁄₈ 22.2

4¹⁄₂ 114.3

2³⁄₄ 69.8

¹⁵⁄₁₆ 23.8

1¹⁄₂ 38.1

1²⁵⁄₃₂ 45.2

6.4

2 2³⁄₁₆

P3-Y232Ng P3-Y235Ng

2¹⁄₂ 63.50

6³⁄₄ 171.4

9¹⁄₁₆ 230.2

2¹³⁄₁₆ 71.44

2³⁄₈ 60.3

⁵⁄₈ 16

1 25.4

5 127.0

3 76.2

1⁵⁄₁₆ 33.3

1²³⁄₃₂ 43.6

2¹⁄₆₄ 51.2

8.4

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆

P3-Y236N P3-Y238N P3-Y239N

2¹¹⁄₁₆ 68.26

7¹⁄₂ 190.5

9¹⁄₂ 241.3

3¹⁄₁₆ 77.79

2¹⁄₂ 63.5

⁵⁄₈ 16

1¹⁄₈ 28.6

5³⁄₈ 136.5

3⁵⁄₁₆ 84.1

1¹⁄₁₆ 27.0

1²⁷⁄₃₂ 46.8

2⁷⁄₆₄ 53.6

11.6

.50

YG2B08NL YG210NL YG211NL YG212NL

.82

2.27

2.59

YG224NL YG226NL YG227NL YG228NL

2.91

YG231NL YG2E32NL

3.81

YG232NL YG235NL

5.27


Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" and smaller shaft sizes, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. K N lip seals standard. H labyrinth seals available. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). g Available with E3 triple lip seals. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-22

Intermediate Ball Bearing Pillow Blocks

P3-W200E Cast Iron Housing Standard Backing Height Alignable Eccentric Cam Locking Collar Relubricable Extended Inner Ring


Pillow block number

A †

B

C

D

E

F Bolts

H

L

M

S

W R

Unit wt. (lbs./kg)

¹⁄₂ ⁵⁄₈

P3-W2B08E P3-W210E

1³⁄₁₆

3¹⁄₂

4⁵⁄₈

1¹⁄₈

1¹⁄₂

³⁄₈

¹⁄₂

2¹¹⁄₃₂

1¹⁄₈

³⁄₄

⁷⁄₈

1¹³⁄₆₄

.9

³⁄₄

P3-W212E

1⁵⁄₁₆ 33.34

3⁷⁄₈ 98.4

5¹⁄₈ 130.2

1⁷⁄₃₂ 30.96

1¹⁄₂ 38.1

³⁄₈ 10

¹⁄₂ 12.7

2¹⁹⁄₃₂ 65.9

1⁵⁄₁₆ 33.3

¹¹⁄₁₆ 17.5

⁵⁹⁄₆₄ 23.4

1¹⁹⁄₆₄ 32.9

1.6

⁷⁄₈ ¹⁵⁄₁₆ 1

P3-W214E P3-W215E P3-W216E

1⁷⁄₁₆ 36.51

4 101.6

5³⁄₈ 136.5

1⁷⁄₃₂ 30.96

1⁵⁄₈ 41.3

³⁄₈ 10

⁹⁄₁₆ 14.3

2⁷⁄₈ 73.0

1¹⁄₂ 38.1

¹¹⁄₁₆ 17.5

⁵⁹⁄₆₄ 23.4

1⁹⁄₃₂ 32.5

1.8

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

P3-W218E P3-W219E P3-W2E20E

1¹¹⁄₁₆ 42.86

4⁵⁄₈ 117.5

6⁵⁄₁₆ 160.3

1¹³⁄₃₂ 35.72

1³⁄₄ 44.4

¹⁄₂ 12

¹¹⁄₁₆ 17.5

3⁵⁄₁₆ 84.1

1³⁄₄ 44.4

¹⁵⁄₁₆ 23.8

1³⁄₆₄ 26.6

1²⁹⁄₆₄ 36.9

2.5

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

P3-W220E P3-W222E P3-W223E

1⁷⁄₈ 47.62

4¹⁵⁄₁₆ 125.4

6³⁄₈ 161.9

1¹⁷⁄₃₂ 38.89

1⁷⁄₈ 47.6

¹⁄₂ 12

¹³⁄₁₆ 20.6

3¹¹⁄₁₆ 93.7

2³⁄₁₆ 55.6

¹³⁄₁₆ 20.6

1⁵⁄₃₂ 29.4

1³⁵⁄₆₄ 39.3

3.7

1¹⁄₂

P3-W224E

2 50.80

5³⁄₈ 136.5

7¹⁄₁₆ 179.4

1²³⁄₃₂ 43.66

1⁷⁄₈ 47.6

¹⁄₂ 12

¹³⁄₁₆ 20.6

4 101.6

2³⁄₈ 60.3

¹⁵⁄₁₆ 23.8

1⁹⁄₃₂ 32.5

1⁴¹⁄₆₄ 41.7

4.6

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

P3-W226E P3-W227E P3-W228E

2¹⁄₈ 53.98

5⁵⁄₈ 142.9

7¹⁄₄ 184.2

1²³⁄₃₂ 43.66

2 50.8

¹⁄₂ 12

¹³⁄₁₆ 20.6

4⁵⁄₁₆ 109.5

2¹⁄₂ 63.5

⁷⁄₈ 22.2

1⁹⁄₃₂ 32.5

1²¹⁄₃₂ 42.1

5.0

1¹⁵⁄₁₆ 2

P3-W231E P3-W2E32E

2¹⁄₄ 57.15

6³⁄₁₆ 157.2

7⁷⁄₈ 200.0

1²³⁄₃₂ 43.66

2¹⁄₈ 54.0

⁵⁄₈ 16

⁷⁄₈ 22.2

4¹⁄₂ 114.3

2³⁄₄ 69.8

¹⁵⁄₁₆ 23.8

1⁹⁄₃₂ 32.5

1²⁵⁄₃₂ 45.2

5.5

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" and smaller shaft sizes, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). R Width dimension for closed end unit Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-23

U

.41 .73

0.82

1.14

1.68

2.09

2.27

2.5

Bearing no.

WG2B08EL WG210EL WG212EL WG214EL WG215EL WG216EL WG218EL WG219EL WG2E20EL WG220EL WG222EL WG223EL WG224EL WG226EL WG227EL WG228EL WG231EL WG2E32EL


P3-S200E Cast Iron Housing Standard Backing Height Alignable Spring Locking Relubricatable Extended Inner Ring Available in Nickel Plate k Available in DURA-KLEAN K


Pillow block number

A †

B

C

D

E

F Bolts

H

L

S

U

W X

Unit wt. (lbs./kg)

Replacement bearing no. SG212EL

³⁄₄

P3-S212E

1⁵⁄₁₆ 33.34

3⁷⁄₈ 98.4

5¹⁄₈ 130.2

1¹⁄₈ 28.58

1¹⁄₂ 38.1

³⁄₈ 10

¹⁄₂ 12.7

2¹⁹⁄₃₂ 65.9

¹¹⁄₁₆ 17.5

³⁄₄ 19.0

1¹⁹⁄₆₄ 32.9

1.5

⁷⁄₈ ¹⁵⁄₁₆ 1

P3-S214E P3-S215E P3-S216E

1⁷⁄₁₆

4

5³⁄₈

1³⁄₁₆

1⁵⁄₈

³⁄₈

⁹⁄₁₆

2⁷⁄₈

¹¹⁄₁₆

¹³⁄₁₆

1⁹⁄₃₂

1.7 1.6 1.6

36.51

101.6

136.5

30.17

41.3

10

14.3

73.0

17.5

20.6

32.5

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

P3-S218E P3-S219E P3-S2E20E

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

P3-S220E P3-S222E P3-S223E

1¹¹⁄₁₆

4⁵⁄₈

6⁵⁄₁₆

1¹¹⁄₃₂

1³⁄₄

¹⁄₂

¹¹⁄₁₆

3⁵⁄₁₆

¹⁵⁄₁₆

⁶¹⁄₆₄

1²⁹⁄₆₄

42.86

117.5

160.3

34.13

44.4

12

17.5

84.1

23.8

24.2

36.9

1⁷⁄₈

4¹⁵⁄₁₆

6³⁄₈

1⁹⁄₁₆

1⁷⁄₈

¹⁄₂

¹³⁄₁₆

3¹¹|₁₆

¹³⁄₁₆

1⁷⁄₆₄

1³⁵⁄₆₄

47.62

125.4

161.9

39.67

47.6

12

20.6

93.7

20.6

28.2

39.3

.68

.73 2.6 2.6 2.6 1.18

2 50.80

5³⁄₈ 136.5

7¹⁄₁₆ 179.4

1¹¹⁄₁₆ 42.87

1⁷⁄₈ 47.6

¹⁄₂ 12

¹³⁄₁₆ 20.6

4 101.6

¹⁵⁄₁₆ 23.8

1¹³⁄₆₄ 30.6

1⁴¹⁄₆₄ 41.7

4.4

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

P3-S226E P3-S227E P3-S228E

2¹⁄₈

5⁵⁄₈

7¹⁄₄

1⁴⁹⁄₆₄

2

¹⁄₂

¹³⁄₁₆

4⁵⁄₁₆

⁷⁄₈

1¹⁵⁄₆₄

1²¹⁄₃₂

5.1 5.0 4.9

1¹⁵⁄₁₆

P3-S231E

142.9

184.2

44.85

50.8

12

20.6

109.5

22.2

31.4

42.1

6³⁄₁₆ 157.2

7⁷⁄₈ 200.0

1⁵¹⁄₆₄ 45.64

2¹⁄₈ 54.0

⁵⁄₈ 16

⁷⁄₈ 22.2

4¹⁄₂ 114.3

¹⁵⁄₁₆ 23.8

1¹⁷⁄₆₄ 32.1

1²⁵⁄₃₂ 45.2

SG220EL SG222EL SG223EL 1.50

P3-S224E

2¹⁄₄ 57.15

SG218EL SG219EL SG2E20EL

3.4 3.4 3.3

1¹⁄₂

53.98

SG214EL SG215EL SG216EL

SG224EL 2.00 SG226EL SG227EL SG228EL 2.22

5.8

SG231EL 2.63

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. L DURA-KLEAN coated housings available; add prefix W, i.e. WP3-S212E. k Nickel plated housings available; add Suffix K75, i.e. P3-S212EK75. Nickel plated units are furnished prelubricated with food grade grease and black oxide coated inner and outer rings. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-24


PL3-U200N Cast Iron Housing Low Backing Height Alignable Spring Locking Relubricatable Wide Inner Ring


inches ¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

Lip seals

A †

B

C

D

E

F Bolts

H

L

S

U

30.6

³⁄₄ 19.0

1¹⁹⁄₆₄ 32.9

1.6 0.8

UG212NL UG2M20NL

⁹⁄₁₆

⁵¹⁄₆₄

1⁹⁄₃₂

1.8 1.8 1.7

14.3

20.2

32.5

0.9


1.1


4³⁄₄

1³⁄₃₂

1³⁄₈

³⁄₈

¹⁄₂

2¹⁄₈

⁹⁄₁₆

⁴¹⁄₆₄

1¹³⁄₆₄

26.99

88.9

120.6

27.78

34.9

10

12.7

54.0

14.3

16.3

³⁄₄

PL3-U212N PL3-U2M20N

1¹⁄₄ 31.75

3⁷⁄₈ 98.4

5¹⁄₈ 130.2

1⁹⁄₃₂ 32.54

1¹⁄₂ 38.1

³⁄₈ 10

⁷⁄₁₆ 11.1

2¹⁷⁄₃₂ 64.3

¹¹⁄₁₆ 17.5

⁷⁄₈ ¹⁵⁄₁₆ 1

PL3-U214Ng PL3-U215Ng PL3-U216Ng PL3-U2M25N

1⁵⁄₁₆

4¹⁄₈

5¹⁄₂

1²³⁄₆₄

1³⁄₄

³⁄₈

⁵⁄₈

2¹¹⁄₁₆

33.34

104.8

139.7

34.53

44.4

10

15.9

68.3

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

PL3-U218N PL3-U219N PL3-U2E20N PL3-U2M30N

30

Bearing no.

UG2B08NL UG210NL UG211NL UG2M17NL

3¹⁄₂

25

Unit wt. (lbs./kg) 1.0 .9 .9 0.4

1¹⁄₁₆

20

1⁹⁄₁₆

4³⁄₄

6⁵⁄₁₆

1⁹⁄₁₆

1⁷⁄₈

¹⁄₂

¹¹⁄₁₆

3⁵⁄₃₂

³⁄₄

⁶¹⁄₆₄

1²⁹⁄₆₄

39.69

120.6

160.3

39.69

47.6

12

17.5

80.2

19.0

24.2

36.9

2.6 2.5 2.5

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


1¹³⁄₁₆

4¹⁵⁄₁₆

6³⁄₈

1⁴⁹⁄₆₄

1⁷⁄₈

¹⁄₂

³⁄₄

3⁵⁄₈

¹³⁄₁₆

1⁷⁄₆₄

1³⁵⁄₆₄

46.04

125.4

161.9

44.85

47.6

12

19.0

92.1

20.6

28.2

39.3

1.6


1¹⁄₂

PL3-U224Ng PL3-U2M40N

1¹⁵⁄₁₆ 49.21

5³⁄₈ 136.5

7¹⁄₁₆ 179.4

1²⁹⁄₃₂ 48.42

1⁷⁄₈ 47.6

¹⁄₂ 12

³⁄₄ 19.0

3¹⁵⁄₁₆ 100.0

¹⁵⁄₁₆ 23.8

1¹¹⁄₆₄ 29.8

1⁴¹⁄₆₄ 41.7

4.5 2.0

UG224NL UG2M40NL

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


2¹⁄₁₆

5⁵⁄₈

7¹⁄₄

2¹⁄₃₂

2

¹⁄₂

³⁄₄

4¹⁄₄

⁷⁄₈

1¹⁵⁄₆₄

1²¹⁄₃₂

52.39

142.9

184.2

51.59

50.8

12

19.0

108.0

22.2

31.4

42.1

5.2 5.2 5.1 2.2


2³⁄₁₆

6³⁄₁₆

7⁷⁄₈

2³⁄₃₂

2¹⁄₈

⁵⁄₈

¹³⁄₁₆

4⁷⁄₁₆

¹⁵⁄₁₆

1¹⁷⁄₆₄

1²⁵⁄₃₂

55.56

157.2

200.0

53.18

54.0

16

20.6

112.7

23.8

32.1

45.2

5.9 5.8 2.5


2⁷⁄₁₆

6³⁄₄

9¹⁄₁₆

2¹⁄₄

2³⁄₈

⁵⁄₈

¹⁵⁄₁₆

4¹⁵⁄₁₆

1⁵⁄₁₆

1¹³⁄₃₂

2¹⁄₆₄

7.4 7.3

61.91

171.4

230.2

57.15

60.3

16

23.8

125.4

33.3

35.7

51.2

3.2


11.0 11.0 10.9 4.9


35 40

45 1¹⁵⁄₁₆ 2

PL3-U231Ng PL3-U2E32Ng PL3-U2M50N

2 2³⁄₁₆

PL3-U232Ng PL3-U235Ng PLE-U2M55N

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆

PL3-U236N PL3-U238N PL3-U239N PL3-U2M60N

50

55

2¹¹⁄₁₆

7¹⁄₂

9¹⁄₂

2¹⁄₂

2¹⁄₂

⁵⁄₈

1¹⁄₈

5³⁄₈

1¹⁄₁₆

1⁹⁄₁₆

2⁷⁄₆₄

68.26

190.5

241.3

63.50

63.5

16

28.6

136.5

27.0

39.7

53.6

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" (17 mm) and smaller shafts, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. L N lip seals standard. H labyrinth seals available. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). g Available with E3 triple lip seals. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-25

W X

PL3-U2B08N PL3-U210N PL3-U211N PL3-U2M17N

17

60


3.6 3.5 3.5


PL3-Y200N Cast Iron Housing Low Backing Height Alignable Eccentric Cam Locking Collar Relubricatable Wide Inner Ring

Dimensions (inches/mm) Shaft Diameter


inches

Lip seals

A †

B

C

D

E

F Bolts

H

L

M

S

U

W X

Unit wt. (lbs./kg)

Bearing no.

¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

PL3-Y2B08N PL3-Y210N PL3-Y211N

1¹⁄₁₆ 26.99

3¹⁄₂ 88.9

4³⁄₄ 120.6

1¹⁵⁄₃₂ 37.31

1³⁄₈ 34.9

³⁄₈ 10

¹⁄₂ 12.7

2¹⁄₈ 54.0

1¹⁄₈ 28.6

⁹⁄₁₆ 14.3

⁵⁹⁄₆₄ 23.4

1¹³⁄₆₄ 30.6

1.0

³⁄₄

PL3-Y212N

1¹⁄₄ 31.75

3⁷⁄₈ 98.4

5¹⁄₈ 130.2

1²³⁄₃₂ 43.66

1¹⁄₂ 38.1

³⁄₈ 10

⁷⁄₁₆ 11.1

2¹⁷⁄₃₂ 64.3

1⁵⁄₁₆ 33.3

¹¹⁄₁₆ 17.5

1³⁄₆₄ 26.6

1¹⁹⁄₆₄ 32.9

1.7

⁷⁄₈ ¹⁵⁄₁₆ 1

PL3-Y214Ng PL3-Y215Ng PL3-Y216Ng

1⁵⁄₁₆ 33.34

4¹⁄₈ 104.8

5¹⁄₂ 139.7

1³⁄₄ 44.45

1³⁄₄ 44.4

³⁄₈ 10

⁵⁄₈ 15.9

2¹¹⁄₁₆ 68.3

1¹⁄₂ 38.1

⁹⁄₁₆ 14.3

1¹⁄₁₆ 27.0

1⁹⁄₃₂ 32.5

1.9 0.9


1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

PL3-Y218N PL3-Y219N PL3-Y2E20N

1⁹⁄₁₆ 39.69

4³⁄₄ 120.6

6⁵⁄₁₆ 160.3

1²⁹⁄₃₂ 48.42

1⁷⁄₈ 47.6

¹⁄₂ 12

¹¹⁄₁₆ 17.5

3⁵⁄₃₂ 80.2

1³⁄₄ 44.4

³⁄₄ 19.0

1³⁄₁₆ 30.2

1²⁹⁄₆₄ 36.9

2.6 1.2


1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


1¹³⁄₁₆ 46.04

4¹⁵⁄₁₆ 125.4

6³⁄₈ 161.9

2¹⁄₆₄ 51.20

1⁷⁄₈ 47.6

¹⁄₂ 12

³⁄₄ 19.0

3⁵⁄₈ 92.1

2³⁄₁₆ 55.6

¹³⁄₁₆ 20.6

1⁹⁄₃₂ 32.5

1³⁵⁄₆₄ 39.3

3.8 1.7


1¹⁄₂

PL3-Y224Ng

1¹⁵⁄₁₆ 49.21

5³⁄₈ 136.5

7¹⁄₁₆ 179.4

2⁷⁄₃₂ 56.36

1⁷⁄₈ 47.6

¹⁄₂ 12

³⁄₄ 19.0

3¹⁵⁄₁₆ 100.0

2³⁄₈ 60.3

¹⁵⁄₁₆ 23.8

1³⁄₈ 34.9

1⁴¹⁄₆₄ 41.7

4.8

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


2¹⁄₁₆ 52.39

5⁵⁄₈ 142.9

7¹⁄₄ 184.2

2⁷⁄₃₂ 56.36

2 50.8

¹⁄₂ 12

³⁄₄ 19.0

4¹⁄₄ 108.0

2¹⁄₂ 63.5

⁷⁄₈ 22.2

1³⁄₈ 34.9

1²¹⁄₃₂ 42.1

5.5

1¹⁵⁄₁₆ 2

PL3-Y231Ng PL3-Y2E32Ng

2³⁄₁₆ 55.56

6³⁄₁₆ 157.2

7⁷⁄₈ 200.0

2¹⁵⁄₃₂ 62.71

2¹⁄₈ 54.0

⁵⁄₈ 16

¹³⁄₁₆ 20.6

4⁷⁄₁₆ 112.7

2³⁄₄ 69.8

¹⁵⁄₁₆ 23.8

1¹⁄₂ 38.1

1²⁵⁄₃₂ 45.2

6.2

2 2³⁄₁₆

PL3-Y232Ng PL3-Y235Ng

2⁷⁄₁₆ 61.91

6³⁄₄ 171.4

9¹⁄₁₆ 230.2

2¹³⁄₁₆ 71.44

2³⁄₈ 60.3

⁵⁄₈ 16

¹⁵⁄₁₆ 23.8

4¹⁵⁄₁₆ 125.4

3 76.2

1⁵⁄₁₆ 33.3

1²³⁄₃₂ 43.6

2¹⁄₆₄ 51.2

8.0

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆

PL3-Y236N PL3-Y238N PL3-Y239N

2¹¹⁄₁₆ 68.26

7¹⁄₂ 190.5

9¹⁄₂ 241.3

3¹⁄₁₆ 77.79

2¹⁄₂ 63.5

⁵⁄₈ 16

1¹⁄₈ 28.6

5³⁄₈ 136.5

3⁵⁄₁₆ 84.1

1¹⁄₁₆ 27.0

1²⁷⁄₃₂ 46.8

2⁷⁄₆₄ 53.6

11.6

0.4

0.8

2.1

2.4

YG2B08NL YG210NL YG211NL YG212NL

YG224NL YG226NL YG227NL YG228NL

2.7

YG231NL YG2E32NL

3.5

YG232NL YG235NL

5.3


Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" and smaller shaft sizes, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. L N lip seals standard. H labyrinth seals available. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). g Available with E3 triple lip seals. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-26


PL3-W200E Cast Iron Housing Low Backing Height Alignable Eccentric Cam Locking Collar Relubricatable Extended Inner Ring


Pillow block number

A †

B

C

D

E

F Bolts

H

L

M

S

W R

Unit wt. (lbs./kg)

Bearing no.

¹⁄₂ ⁵⁄₈

PL3-W2B08E PL3-W210E

1¹⁄₁₆

3¹⁄₂

4³⁄₄

1¹⁄₈

1³⁄₈

³⁄₈

¹⁄₂

2¹⁄₈

1¹⁄₈

⁹⁄₁₆

⁷⁄₈

1¹³⁄₆₄

.9

³⁄₄

PL3-W212E

1¹⁄₄ 31.75

3⁷⁄₈ 98.4

5¹⁄₈ 130.2

1⁷⁄₃₂ 30.96

1¹⁄₂ 38.1

³⁄₈ 10

⁷⁄₁₆ 11.1

2¹⁷⁄₃₂ 64.3

1⁵⁄₁₆ 33.3

¹¹⁄₁₆ 17.5

⁵⁹⁄₆₄ 23.4

1¹⁹⁄₆₄ 32.9

1.6

⁷⁄₈ ¹⁵⁄₁₆ 1

PL3-W214E PL3-W215E PL3-W216E

1⁵⁄₁₆ 33.34

4¹⁄₈ 104.8

5¹⁄₂ 139.7

1⁷⁄₃₂ 30.96

1³⁄₄ 44.4

³⁄₈ 10

⁵⁄₈ 15.9

2¹¹⁄₁₆ 68.3

1¹⁄₂ 38.1

⁹⁄₁₆ 14.3

⁵⁹⁄₆₄ 23.4

1⁹⁄₃₂ 32.5

1.8 0.8

WG214EL WG215EL WG216EL

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

PL3-W218E PL3-W219E PL3-W2E20E

1⁹⁄₁₆ 39.69

4³⁄₄ 120.6

6⁵⁄₁₆ 160.3

1¹³⁄₃₂ 35.72

1⁷⁄₈ 47.6

¹⁄₂ 12

¹¹⁄₁₆ 17.5

3⁵⁄₃₂ 80.2

1³⁄₄ 44.4

³⁄₄ 19.0

1³⁄₆₄ 26.6

1²⁹⁄₆₄ 36.9

2.5 1.1

WG218EL WG219EL WG2E20EL

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


1¹³⁄₁₆ 46.04

4¹⁵⁄₁₆ 125.4

6³⁄₈ 161.9

1¹⁷⁄₃₂ 38.89

1⁷⁄₈ 47.6

¹⁄₂ 12

³⁄₄ 19.0

3⁵⁄₈ 92.1

2³⁄₁₆ 55.6

¹³⁄₁₆ 20.6

1⁵⁄₃₂ 29.4

1³⁵⁄₆₄ 39.3

3.7 1.7


1¹⁄₂

PL3-W224E

1¹⁵⁄₁₆ 49.21

5³⁄₈ 136.5

7¹⁄₁₆ 179.4

1²³⁄₃₂ 43.66

1⁷⁄₈ 47.6

¹⁄₂ 12

³⁄₄ 19.0

3¹⁵⁄₁₆ 100.0

2³⁄₈ 60.3

¹⁵⁄₁₆ 23.8

1⁹⁄₃₂ 32.5

1⁴¹⁄₆₄ 41.7

4.6 2.1

WG224EL

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


2¹⁄₁₆ 52.39

5⁵⁄₈ 142.9

7¹⁄₄ 184.2

1²³⁄₃₂ 43.66

2 50.8

¹⁄₂ 12

³⁄₄ 19.0

4¹⁄₄ 2¹⁄₂ 108.0 63.5

⁷⁄₈ 22.2

1⁹⁄₃₂ 32.5

1²¹⁄₃₂ 42.1

5.0 2.3


1¹⁵⁄₁₆ 2

PL3-W231E PL3-W2E32E

2³⁄₁₆ 55.56

6³⁄₁₆ 157.2

7⁷⁄₈ 200.0

1²³⁄₃₂ 43.66

2¹⁄₈ 54.0

⁵⁄₈ 16

¹³⁄₁₆ 20.6

4⁷⁄₁₆ 2³⁄₄ 112.7 69.8

¹⁵⁄₁₆ 33.3

1⁹⁄₃₂ 32.5

1²⁵⁄₃₂ 45.2

5.5 2.5

WG231EL WG2E32EL

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" and smaller shaft sizes, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). R Width dimensions for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-27

U

WG2B08EL WG210EL 0.7

WG212EL


PL3-S200E Cast Iron Housing Low Backing Height Alignable Spring Locking Relubricatable Extended Inner Ring Available in Nickel Plate k


Pillow block number

A †

B

C

D

E

F Bolts

H

L

S

U

W X

³⁄₄

PL3-S212E

1¹⁄₄ 31.75

3⁷⁄₈ 98.4

5¹⁄₈ 130.2

1¹⁄₈ 28.58

1¹⁄₂ 38.1

³⁄₈ 10

⁷⁄₁₆ 11.1

2¹⁷⁄₃₂ 64.3

¹¹⁄₁₆ 17.5

³⁄₄ 19.0

1¹⁹⁄₆₄ 32.9

⁷⁄₈ ¹⁵⁄₁₆ 1

PL3-S214E PL3-S215E PL3-S216E

1⁵⁄₁₆

4¹⁄₈

5¹⁄₂

1³⁄₁₆

1³⁄₄

³⁄₈

⁵⁄₈

2¹¹⁄₁₆

⁹⁄₁₆

¹³⁄₁₆

1⁹⁄₃₂

33.34

104.8

139.7

30.17

44.4

10

15.9

68.3

14.3

20.6

32.5

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

PL3-S218E PL3-S219E PL3-S2E20E

1⁹⁄₁₆

4³⁄₄

6⁵⁄₁₆

1¹¹⁄₃₂

1⁷⁄₈

¹⁄₂

¹¹⁄₁₆

3⁵⁄₃₂

³⁄₄

⁶¹⁄₆₄

1²⁹⁄₆₄

39.69

120.6

160.3

34.13

47.6

12

17.5

80.2

19.0

24.2

36.9

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


1¹³⁄₁₆

4¹⁵⁄₁₆

6³⁄₈

1⁹⁄₁₆

1⁷⁄₈

¹⁄₂

³⁄₄

3⁵⁄₈

¹³⁄₁₆

1⁷⁄₆₄

1³⁵⁄₆₄

46.04 1¹⁵⁄₁₆ 49.21

125.4 5³⁄₈ 136.5

161.9 7¹⁄₁₆ 179.4

39.67 1¹¹⁄₁₆ 42.87

47.6 1⁷⁄₈ 47.6

12 ¹⁄₂ 12

19.0 ³⁄₄ 19.0

92.1 3¹⁵⁄₁₆ 100.0

20.6 ¹⁵⁄₁₆ 23.8

28.2 1¹³⁄₆₄ 30.6

39.3 1⁴¹⁄₆₄ 41.7

2¹⁄₁₆

5⁵⁄₈

7¹⁄₄

1⁴⁹⁄₆₄

2

¹⁄₂

³⁄₄

4¹⁄₄

⁷⁄₈

1¹⁵⁄₆₄

1²¹⁄₃₂

52.39 2³⁄₁₆ 55.56

142.9 6³⁄₁₆ 157.2

184.2 7⁷⁄₈ 200.0

44.85 1⁵¹⁄₆₄ 45.64

50.8 2¹⁄₈ 54.0

12 ⁵⁄₈ 16

19.0 ¹³⁄₁₆ 20.6

108.0 4⁷⁄₁₆ 112.7

22.2 ¹⁵⁄₁₆ 23.8

31.4 1¹⁷⁄₆₄ 32.1

42.1 1²⁵⁄₃₂ 45.2

1¹⁄₂

PL3-S224E

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


1¹⁵⁄₁₆

PL3-S231E

Unit wt. (lbs./kg) 1.4 .64 1.9 1.8 1.8 .82 2.6 2.6 2.5 1.14 3.4 3.3 3.3 1.50 4.2 1.91 5.1 5.0 5.0 2.27 5.7 2.59

Replacement bearing no. SG212EL SG214EL SG215EL SG216EL SG218EL SG219EL SG2E20EL SG220EL SG222EL SG223EL SG224EL SG226EL SG227EL SG228EL SG231EL

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. k Nickel plated housings available add Suffix K75, i.e. PL3-S212EK75. Nickel plated units are furnished prelubricated with food grade grease and black oxide coated inner and outer rings. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-28


PS-W200E, PS-Y200N Formed Steel Housing Standard Backing Height Alignable Eccentric Cam Locking Collar Non-relubricatable Extended and Wide Inner Ring


Pillow block number

D A

Extended Inner Ring

B

C

Wide Inner Ring

E W200

Y200

F Bolts

Radial load Unit wt. (lbs./kg.) rating of housing Extended Wide W200 Y200 lbs/ inner ring inner ring newtons U

H

L

M

S

¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

PS-W2B08E PS-W210E ––––––

PS-Y2B08N PS-Y210N PS-Y211N

1³⁄₁₆ 3¹⁄₂ 30.2 88.9

4⁵⁄₈ 117.5

1¹⁄₈ 28.58

1¹⁵⁄₃₂ 37.31

1¹⁄₁₆ 27.0

³⁄₈ 10

⁷⁄₃₂ 5.6

2¹¹⁄₃₂ 59.5

1¹⁄₈ ³³⁄₆₄ 28.6 13.1

⁷⁄₈ 22.2

⁵⁹⁄₆₄ 23.4

600 2 670

.7 0.3

.9 0.4

³⁄₄

PS-W212E

PS-Y212N

1⁵⁄₁₆ 33.3

5¹⁄₈ 130.2

1⁷⁄₃₂ 30.96

1²³⁄₃₂ 43.66

1¹⁄₈ 28.6

³⁄₈ 10

⁷⁄₃₂ 5.6

2⁵⁄₈ 66.7

1⁵⁄₁₆ ⁹⁄₁₆ 33.3 14.3

⁵⁹⁄₆₄ 23.4

1³⁄₆₄ 26.6

700 3 110

.9 0.4

1.1 0.5

⁷⁄₈ ¹⁵⁄₁₆ 1

PS-W214E PS-W215E PS-W216E

PS-Y214N PS-Y215N PS-Y216N

1⁷⁄₁₆ 4¹⁄₁₆ 5³⁄₈ 36.5 103.2 136.5

1⁷⁄₃₂ 30.96

1³⁄₄ 1⁷⁄₃₂ 44.45 31.0

³⁄₈ 10

⁷⁄₃₂ 5.6

2⁵⁵⁄₆₄ 72.6

1¹⁄₂ ¹⁄₂ 38.1 12.7

⁵⁹⁄₆₄ 23.4

1¹⁄₁₆ 27.0

800 3 560

1.1 0.5

1.3 0.6

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

PS-W218E PS-W219E PS-W2E20E

PS-Y218N PS-Y219N PS-Y2E20N

1¹¹⁄₁₆ 4⁴⁹⁄₆₄ 6⁵⁄₁₆ 42.9 121.0 160.3

1¹³⁄₃₂ 35.72

1²⁹⁄₃₂ 48.42

1⁷⁄₁₆ 36.5

¹⁄₂ 12

⁵⁄₁₆ 7.9

3⁵⁄₁₆ 84.1

1³⁄₄ ⁴⁹⁄₆₄ 44.4 19.4

1³⁄₆₄ 26.6

1³⁄₁₆ 30.2

985 4 380

1.7 0.8

2.0 0.9

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

PS-W220E PS-W222E PS-W223E

PS-Y220N PS-Y222N PS-Y223N

1⁷⁄₈ 47.6

1⁷⁄₃₂ 38.89

2¹⁄₆₄ 51.20

1⁵⁄₈ 41.3

¹⁄₂ 12

⁵⁄₁₆ 7.9

3³⁄₄ 95.2

2³⁄₁₆ ⁴⁹⁄₆₄ 55.6 19.4

1⁵⁄₃₂ 29.4

1⁹⁄₃₂ 32.5

1300 5 780

2.4 1.1

2.7 1.2

3⁷⁄₈ 98.4

5⁵⁄₆₄ 6¹⁵⁄₁₆ 129.0 176.2

Bold face items are normally available from stock; please consult for availability of non-stock items. Also available with U200N wide inner ring. Replace "Y" with "U"; i.e. PS-U2B08N. For dimensions D and U, see page B-30. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-29


PT3-U200N Cast Iron Housing Standard Backing Height Tapped Base Alignable

Spring Locking Relubricatable Wide Inner Ring

Dimensions (inches/mm) Shaft Diameter


F

A †

B

C

D

E

Tap

Min. Depth

L

N

U

Unit wt. (lbs./kg)

³⁄₄

PT3-U212N

1⁵⁄₁₆ 33.34

2 50.80

2⁷⁄₈ 73.0

1⁹⁄₃₂ 32.54

1¹⁄₂ 38.1

³⁄₈-16 —

¹⁄₂ 12.7

2¹⁹⁄₃₂ 65.9

1¹⁄₈ 28.6

³⁄₄ 19.0

1.2

⁷⁄₈ ¹⁵⁄₁₆ 1

PT3-U214Ng PT3-U215Ng PT3-U216Ng

1⁷⁄₁₆

2

2⁷⁄₈

1²³⁄₆₄

1¹⁄₂

³⁄₈-16

¹⁄₂

2⁷⁄₈

1⁵⁄₁₆

⁵¹⁄₆₄

1.5 1.4 1.4

36.51

50.80

73.0

34.53

38.1

—

12.7

73.0

33.3

20.2

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

PT3-U218N PT3-U219N PT3-U2E20N

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

PT3-U220Ng PT3-U222Ng PT3-U223Ng

47.62

82.55

111.9

44.85

50.8

—

1¹¹⁄₁₆ 1³⁄₄

PT3-U227N PT3-U228N

2¹⁄₈ 53.98

3³⁄₄ 95.25

5 127.0

2¹⁄₃₂ 51.59

2 50.8

¹⁄₂-13 M12x1.75

1¹⁵⁄₁₆ 2

PT3-U231Ng PT3-U2E32Ng

2¹⁄₄

4

5⁷⁄₁₆

2³⁄₃₂

2

⁵⁄₈-11

57.15

101.60 138.1

48.42

50.8

—

1¹¹⁄₁₆

3

4

1⁹⁄₁₆

1¹⁄₂

⁷⁄₁₆-14

⁵⁄₈

3⁵⁄₁₆

1¹⁹⁄₃₂

⁶¹⁄₆₄

42.86

76.20

101.6

39.69

38.1

—

15.9

84.1

40.5

24.2

1⁷⁄₈

3¹⁄₄

4¹³⁄₃₂

1⁴⁹⁄₆₄

2

¹⁄₂-13

³⁄₄

.54

Bearing no. UG212NL UG214NL UG215NL UG216NL

.64 2.5 2.5 2.4

UG218NL UG219NL UG2E20NL 1.09

3.5 3.4 3.3

3¹¹⁄₁₆

1²⁷⁄₃₂

1⁷⁄₆₄

19.0

93.7

46.9

28.2

⁷⁄₈ 22.2

4¹⁄₄ 2⁹⁄₃₂ 1¹⁵⁄₆₄ 108.0 57.94 31.4

4.9

⁷⁄₈

4¹⁄₂

2¹⁵⁄₃₂

1¹⁷⁄₆₄

5.6 5.5

22.2

114.3

62.7

32.1

L

N

U

UG220NL UG222NL UG223NL 1.50 2.27

UG227NL UG228NL UG231NL UG2E32NL

2.50

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. K N lip seals standard. H labyrinth seals available. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). g Available with E3 triple lip seals.


PT3-S200E Cast Iron Housing Standard Backing Height Alignable

Spring Locking Relubricatable Extended Inner Ring Available in Nickel Platek Available in DURA-KLEAN


Pillow block number

A †

B

C

D

F

E Tap

Min. Depth

Unit Wt. (lbs./kg)

³⁄₄

PT3-S212E

1⁵⁄₁₆ 33.34

2 50.80

2⁷⁄₈ 73.0

1¹⁄₈ 28.58

1¹⁄₂ 38.1

³⁄₈-16 —

¹⁄₂ 12.7

2¹⁹⁄₃₂ 65.9

1¹⁄₈ 28.6

³⁄₄ 19.0

1.0

⁷⁄₈ ¹⁵⁄₁₆ 1

PT3-S214E PT3-S215E PT3-S216E

1⁷⁄₁₆

2

2⁷⁄₈

1³⁄₁₆

1¹⁄₂

³⁄₈-16

¹⁄₂

2⁷⁄₈

1⁵⁄₁₆

¹³⁄₁₆

1.3 1.3 1.2

36.51

50.80

73.0

30.17

38.1

—

12.7

73.0

33.3

20.6

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

PT3-S218E PT3-S219E PT3-S2E20E

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

PT3-S220E PT3-S222E PT3-S223E

1¹¹⁄₁₆ 1³⁄₄

PT3-S227E PT3-S228E

1¹⁵⁄₁₆

PT3-S231E

1¹¹⁄₁₆

3

4

1¹¹⁄₃₂

1¹⁄₂

⁷⁄₁₆-14

⁵⁄₈

3⁵⁄₁₆

1¹⁹⁄₃₂

⁶¹⁄₆₄

42.86

76.20

101.6

34.13

38.1

—

15.9

84.1

40.5

24.2

1⁷⁄₈

3¹⁄₄

4¹³⁄₃₂

1⁹⁄₁₆

1⁷⁄₈

¹⁄₂-13

³⁄₄

47.62

82.55

111.9

39.67

47.6

—

2¹⁄₈ 53.98

3³⁄₄ 95.25

5 127.0

1⁴⁹⁄₆₄ 44.85

2 50.8

¹⁄₂-13 —

2¹⁄₄ 57.15

4 5⁷⁄₁₆ 101.60 138.1

1¹¹⁄₁₆ 42.87

2 50.8

⁵⁄₈-11 —

⁷⁄₈ 22.2

SG214EL SG215EL SG216EL .54

2.3 2.3 2.2

SG218EL SG219EL SG2E20EL 1.00

3.1 3.1 3.0

1²⁷⁄₃₂

1⁷⁄₆₄

19.0

93.7

46.9

28.2

⁷⁄₈ 22.2

4¹⁄₄ 2⁹⁄₃₂ 1¹⁵⁄₆₄ 108.0 57.94 31.4

4.8

4¹⁄₂ 114.3

5.3

1¹³⁄₆₄ 30.6

SG212EL .45

3¹¹⁄₁₆

2¹⁵⁄₃₂ 62.7

Bearing no.

SG220EL SG222EL SG223EL 1.36 2.18


2.36

Bold face items are normally available from stock; please consult for availability of non-stock items. Selection guide, pages B-9, B-10. Lubrication fitting tap size, ¹⁄₈" PT. Load ratings, pages B-11, B-12. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). Additional information, page B-76. k Nickel plated housings available add Suffix K75, i.e. PL3-S212EK75. Nickel plated units are furnished prelubricated with food grade grease and black oxide coated inner and outer rings.

B-30


PH3-U200N Cast Iron Housing High Backing Height Alignable Spring Locking Relubricatable Wide Inner Ring


inches 1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

30

A †

Lip seals PH3-U218N PH3-U219N PH3-U2E20N PH3-U2M30N

C

B

E

F Bolts

H

L

S

U

W X

2

5¹⁄₂

7

1⁹⁄₁₆

1¹⁵⁄₁₆

¹⁄₂

¹¹⁄₁₆

3⁵⁄₈

⁷⁄₈

⁶¹⁄₆₄

1²⁵⁄₆₄

50.80

139.7

177.8

39.69

49.2

12

17.5

92.1

22.2

24.2

36.9

2³⁄₈

6¹⁄₄

8¹⁄₄

1⁴⁹⁄₆₄

2¹⁄₂

⁵⁄₈

³⁄₄

4¹⁄₄

1¹⁄₄

1⁷⁄₆₄

1³⁵⁄₆₄

60.32

158.8

209.6

44.85

63.5

16

19.0

108.0

31.8

28.2

39.3

Unit wt. (lbs./kg) 3.8 3.7 3.7

PH3-U220N PH3-U222N PH3-U223N PH3-U2M35N

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


2³⁄₈

6⁵⁄₈

60.32

168.3

209.6

51.59

60.3

16

19.0

115.9

23.8

31.4

42.1

1¹⁵⁄₁₆

PH3-U231N PH3-U2M50N

2³⁄₄ 69.85

8¹⁄₁₆ 204.8

10¹⁄₈ 257.2

2³⁄₃₂ 53.18

2⁵⁄₈ 66.7

⁵⁄₈ 16

⁷⁄₈ 22.2

5 127.0

1¹⁄₄ 31.8

1¹⁷⁄₆₄ 32.1

1⁵³⁄₆₄ 46.4

9.5

2 2³⁄₁₆

PH3-U232N PH3-U235N PH3-U2M55N

3¹⁄₈

8⁷⁄₈

11³⁄₈

2¹⁄₄

3

⁵⁄₈

⁷⁄₈

5⁵⁄₈

1¹⁄₈

1¹³⁄₃₂

2¹⁄₆₄

13.2 13.1

79.38

225.4

288.9

57.15

76.2

16

22.2

142.9

28.6

35.7

51.2

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆


45 50

55

8¹⁄₄

2¹⁄₃₂

2³⁄₈

⁵⁄₈

³⁄₄

4⁹⁄₁₆

¹⁵⁄₁₆

1¹⁵⁄₆₄

1²¹⁄₃₂

3¹⁄₈

8⁷⁄₈

11³⁄₈

2¹⁄₂

3

³⁄₄

⁷⁄₈

5⁷⁄₈

1¹⁄₄

1⁹⁄₁₆

2⁷⁄₆₄

79.38

225.4

288.9

63.50

76.2

20

22.2

149.2

31.8

39.7

53.6

Please consult for availability. Lubrication fitting tap size, ¹⁄₈" PT. K N lip seals standard. H labyrinth seals available. † Tolerance, +.000" –.010" (+0.00 mm –0.25 mm). X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-31

D

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆ 35

60


Bearing no.

1.6


2.2


3.5


4.2

UG231NL UG2M50NL

5.9


6.5


4.8 4.7 4.7 7.9 7.9 7.8

14.4 14.4 14.3

Standard Duty Ball Bearing Flanged Bracket Units

FB3-U200N Cast Iron Housing 3-bolt Mounting Alignable Spring Locking Relubricatable Wide Inner Ring


mm

³⁄₄ 20

Flanged unit number FB3-U212N FB3-U2M20N

⁷⁄₈ ¹⁵⁄₁₆ 1

FB3-U214Ng FB3-U215Ng FB3-U216Ng FB3-U2M25N

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

FB3-U218N FB3-U219N FB3-U2E20N FB3-U2M30N

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

FB3-U220Ng FB3-U222Ng FB3-U223Ng FB3-U2M35N

25

30

35

A

B

C

2¹⁄₂ 63.5

1¹¹⁄₁₆ 42.9

⁷⁄₈ 22.2

2³⁄₄

1¹³⁄₁₆

69.8

46.0

D

E

F Bolts

G

H

K

L

N

1⁹⁄₃₂ 32.5

2³⁄₈ 60.3

³⁄₈ 10

¹⁄₁₆ 1.6

⁵⁄₁₆ 7.9

1¹⁄₈

1²³⁄₆₄

2¹⁄₂

³⁄₈

³⁄₃₂

28.6

34.53

63.5

10

2.4

P

3 76.2

1¹¹⁄₃₂ 34.1

4¹⁄₄ 108.0

¹¹⁄₃₂ 8.7

1¹⁄₂ 38.1

1.4

³⁄₈

3³⁄₈

1²⁹⁄₆₄

4³⁄₄

¹⁹⁄₆₄

1⁵⁄₈

1.9 1.9 1.8

9.5

85.7

38.9

120.6

7.5

41.3

U

3¹⁄₄

2¹⁄₁₆

1¹⁄₄

1⁹⁄₁₆

2³⁄₄

³⁄₈

¹⁄₁₆

³⁄₈

3³⁄₄

1⁵⁄₈

5³⁄₈

³⁄₈

1⁷⁄₈

82.6

52.3

31.8

39.69

69.8

10

1.6

9.5

95.2

43.7

136.5

9.5

47.6

3³⁄₄

2³⁄₈

1¹⁄₄

1⁴⁹⁄₆₄

3¹⁄₄

¹⁄₂

⁵⁄₃₂

¹⁄₂

4¹⁄₄

1⁵⁹⁄₆₄

6¹⁄₈

³¹⁄₆₄

2

95.2

60.3

31.8

44.85

82.6

12

4.0

12.7

108.0

48.8

155.6

12.3

50.8

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₄"-28 UNF. K N lip seals standard. H labyrinth seals available. g Available with E3 triple lip seals. X Width dimension for closed end unit.

Unit wt. (lbs./kg)

Bearing no.

.64

UG212NL UG2M20NL

0.9


1.1


1.5


2.6 2.5 2.5 3.5 3.4 3.4

Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

Intermediate Ball Bearing Flanged Bracket Units

FB3-S200E Cast Iron Housing 3-bolt Mounting Alignable Spring Locking

Relubricatable Extended Inner Ring Available in Nickel Plate k Available in DURA-KLEAN

Dimensions (inches/mm) Shaft Diameter Inches

Flanged unit number

A

B

C

D

E

F Bolts

G

H

K

L

N

P

U

Unit wt. (lbs./kg)

³⁄₄

FB3-S212E

2¹⁄₂ 63.5

1¹¹⁄₁₆ 42.9

⁷⁄₈ 22.2

1¹⁄₈ 28.58

2³⁄₈ 60.3

³⁄₈ 10

⁷⁄₃₂ 1.6

⁵⁄₁₆ 7.9

3 76.2

1¹¹⁄₃₂ 34.1

4¹⁄₄ 108.0

¹¹⁄₃₂ 8.7

1¹⁄₂ 38.1

1.2

⁷⁄₈ ¹⁵⁄₁₆ 1

FB3-S214E FB3-S215E FB3-S216E

2³⁄₄

1¹³⁄₁₆

1¹⁄₈

1³⁄₁₆

2¹⁄₂

³⁄₈

⁹⁄₃₂

³⁄₈

3³⁄₈

1²⁹⁄₆₄

4³⁄₄

⁵⁄₁₆

1⁵⁄₈

1.7 1.7 1.6

69.8

46.0

28.6

30.17

63.5

10

2.4

9.5

85.7

38.9

120.6

7.5

41.3

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

FB3-S218E FB3-S219E FB3-S2E20E

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

FB3-S220E FB3-S222E FB3-S223E

3¹⁄₄

2¹⁄₁₆

1¹⁄₄

1¹¹⁄₃₂

2³⁄₄

³⁄₈

⁹⁄₃₂

³⁄₈

3³⁄₄

1⁵⁄₈

5³⁄₈

³⁄₈

1⁷⁄₈

82.6

52.3

31.8

34.13

69.8

10

1.6

9.5

95.2

43.7

136.5

9.5

47.6

3³⁄₄

2³⁄₈

1¹⁄₄

1⁹⁄₁₆

3¹⁄₄

¹⁄₂

²³⁄₆₄

¹⁄₂

4¹⁄₄

1⁵⁹⁄₆₄

6¹⁄₈

³¹⁄₆₄

2

95.2

60.3

31.8

39.67

82.6

12

4.0

12.7

108.0

48.8

155.6

12.3

50.8

Bearing no. SG212EL

.54 SG214EL SG215EL SG216EL 0.72 2.2 2.2 2.1


3.2 3.2 3.1


Bold face items are normally available from stock; please consult for availability of non-stock items. Selection guide, pages B-9, B-10. Lubrication fitting tap size, ¹⁄₄"-28 UNF. Load ratings, pages B-11, B-12. k Nickel plated housings; add suffix K75, (i.e. FB3-S212EK75). Additional information, page B-76. Nickel plated units are furnished prelubricated with food grade grease and black oxide coated inner and outer rings.

B-32

Standard Duty Ball Bearing Flanged Units

FX3-U200N Cast Iron Housing 2-bolt Mounting Alignable Spring Locking Relubricatable Wide Inner Ring Available in Nickel Plate k


inches ¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

17 ³⁄₄ 20

FX3-U2B08N FX3-U210N FX3-U211N FX3-U2M17N FX3-U212N FX3-U2M20N FX3-U214Ng FX3-U215Ng FX3-U216Ng FX3-U2M25N

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

FX3-U218N FX3-U219N FX3-U2E20N FX3-U2M30N

30 1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

FX3-U220Ng FX3-U222Ng FX3-U223Ng FX3-U2M35N

1¹⁄₂

FX3-U224Ng FX3-U2M40N

35 40 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 45

FX3-U226Ng FX3-U227Ng FX3-U228Ng FX3-U2M45N

1¹⁵⁄₁₆ 2

FX3-U231Ng FX3-U2E32Ng FX3-U2M50N

2 2³⁄₁₆

FX3-U232Ng FX3-U235Ng FX3-U2M55N

50

A

B

D

Lip seals

⁷⁄₈ ¹⁵⁄₁₆ 1 25

55

Flanged unit number K

F Bolts

H

G

J X

L

N

Unit wt. (lbs./kg) 1.0 .9 .9

2¹⁄₈

3

1³⁄₃₂

³⁄₈

⁵⁄₃₂

¹⁄₂

1²⁵⁄₃₂

1¹⁄₄

3⁷⁄₈

¹⁄₄

54.0

76.20

27.78

10

4.0

12.7

45.2

31.8

98.4

6.4

2⁷⁄₁₆ 61.9

3¹⁷⁄₃₂ 89.69

1⁹⁄₃₂ 32.54

³⁄₈ 10

¹³⁄₆₄ 5.2

⁹⁄₁₆ 14.3

2¹⁄₆₄ 51.2

1³¹⁄₆₄ 37.7

4¹³⁄₃₂ 111.9

⁹⁄₃₂ 7.1

1.2

2¹¹⁄₁₆

3⁵⁷⁄₆₄

1²³⁄₆₄

⁷⁄₁₆

³⁄₁₆

¹⁹⁄₃₂

2

1³⁵⁄₆₄

4²⁹⁄₃₂

¹⁹⁄₆₄

1.6 1.6 1.5

68.3

98.82

34.53

10

4.8

15.1

50.8

39.3

124.6

7.5

4¹⁹⁄₃₂

1⁹⁄₁₆

⁷⁄₁₆

¹¹⁄₆₄

¹⁹⁄₃₂

2¹⁵⁄₆₄

1⁴⁷⁄₆₄

5¹⁹⁄₃₂

²⁷⁄₆₄

81.0

116.68

39.69

10

4.4

15.1

56.7

44.0

142.1

10.7

3⁵⁄₈

5¹⁄₈

1⁴⁹⁄₆₄

¹⁄₂

⁵⁄₃₂

⁵⁄₈

2²³⁄₆₄

1⁵⁹⁄₆₄

6¹⁄₈

³³⁄₆₄

92.1

130.18

44.85

12

4.0

15.9

59.9

48.8

155.6

13.1

4 101.6

5²¹⁄₃₂ 143.67

1²⁹⁄₃₂ 48.42

¹⁄₂ 12

¹¹⁄₆₄ 4.4

⁵⁄₈ 15.9

2³⁵⁄₆₄ 64.7

2⁵⁄₆₄ 52.8

6²⁵⁄₃₂ 172.2

¹⁄₂ 12.7

4.2

4¹⁄₄

5²⁷⁄₃₂

2¹⁄₃₂

¹⁄₂

⁷⁄₆₄

⁵⁄₈

2⁹⁄₁₆

2⁹⁄₆₄

7³⁄₃₂

³⁵⁄₆₄

5.1 5.1 5.0

108.0

148.30

51.59

12

2.8

15.9

65.1

54.4

180.2

13.9

4⁹⁄₁₆

6³⁄₁₆

2³⁄₃₂

⁹⁄₁₆

¹⁹⁄₆₄

³⁄₄

2⁵⁷⁄₆₄

2²⁵⁄₆₄

7⁷⁄₁₆

⁹⁄₁₆

115.9

157.16

53.18

14

7.5

19.0

73.4

60.7

188.9

14.3

5

7¹⁄₄

2¹⁄₄

⁵⁄₈

¹³⁄₃₂

¹³⁄₁₆

3¹⁄₄

2²¹⁄₃₂

8¹⁄₂

²¹⁄₃₂

127.0

184.15

57.15

16

10.3

20.6

82.6

67.5

215.9

16.7

Bearing no.

0.5


0.6

UG212NL UG2M20NL

0.7


1.0


1.4


1.9

UG224NL UG2M40NL

2.2


2.8


3.3


2.5 2.4 2.4

3³⁄₁₆

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" (17 mm) and smaller shafts, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. K N lip seals standard. H labyrinth seals available. k Nickel plated housings available through size 235; add suffix K75, i.e. FX3-U2B08NK75. g Available with E3 triple lip seals. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-33

P

3.1 3.0 3.0

6.3 6.2 7.4 7.3


FX3-Y200N Cast Iron Housing 2-bolt Mounting Alignable Eccentric Cam Locking Collar Relubricatable Wide Inner Ring



A

B

D

Lip seals

F Bolts

G

H

J X

L

M

N

P

Unit wt. (lbs./kg)

¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

FX3-Y2B08N FX3-Y210N FX3-Y211N

2¹⁄₈ 54.0

3 76.20

1¹⁵⁄₃₂ 37.31

³⁄₈ 10

¹⁄₁₆ 1.6

¹⁄₂ 12.7

1²⁵⁄₃₂ 45.2

1¹⁷⁄₃₂ 38.9

1¹⁄₈ 28.6

3⁷⁄₈ 98.4

³³⁄₆₄ 13.1

1.0

³⁄₄

FX3-Y212N

2⁷⁄₁₆ 61.9

3¹⁷⁄₃₂ 89.69

1²³⁄₃₂ 43.66

³⁄₈ 10

¹⁄₁₆ 1.6

⁹⁄₁₆ 14.3

2¹⁄₆₄ 51.2

1⁵¹⁄₆₄ 45.6

1⁵⁄₁₆ 33.3

4¹³⁄₃₂ 111.9

³⁷⁄₆₄ 14.7

1.3

⁷⁄₈ ¹⁵⁄₁₆ 1

FX3-Y214Ng FX3-Y215Ng FX3-Y216Ng

2¹¹⁄₁₆ 68.3

3⁵⁷⁄₆₄ 98.82

1³⁄₄ 44.45

⁷⁄₁₆ 10

¹⁄₁₆ 1.6

¹⁹⁄₃₂ 15.1

2 50.8

1¹³⁄₁₆ 46.0

1¹⁄₂ 38.1

4²⁹⁄₃₂ 124.6

³⁵⁄₆₄ 13.9

1.7

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

FX3-Y218N FX3-Y219N FX3-Y2E20N

3³⁄₁₆ 81.0

4¹⁹⁄₃₂ 116.68

1²⁹⁄₃₂ 48.42

⁷⁄₁₆ 10

¹⁄₁₆ 1.6

¹⁹⁄₃₂ 15.1

2¹⁵⁄₆₄ 56.7

1³¹⁄₃₂ 50.0

1³⁄₄ 44.4

5¹⁹⁄₃₂ 142.1

²¹⁄₃₂ 16.7

2.5

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


3⁵⁄₈ 92.1

5¹⁄₈ 130.18

2¹⁄₆₄ 51.20

¹⁄₂ 12

¹⁄₁₆ 1.6

⁵⁄₈ 15.9

2²³⁄₆₄ 59.9

2⁵⁄₆₄ 52.8

2³⁄₁₆ 55.6

6¹⁄₈ 155.6

¹¹⁄₁₆ 17.5

3.3

1¹⁄₂

FX3-Y224Ng

4 101.6

5²¹⁄₃₂ 143.67

2⁷⁄₃₂ 56.36

¹⁄₂ 12

¹⁄₁₆ 1.6

⁵⁄₈ 15.9

2³⁵⁄₆₄ 65.1

2⁹⁄₃₂ 57.9

2³⁄₈ 63.5

6²⁵⁄₃₂ 180.2

⁴⁵⁄₆₄ 17.5

4.5

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


4¹⁄₄ 108.0

5²⁷⁄₃₂ 148.3

2⁷⁄₃₂ 56.36

¹⁄₂ 12

¹⁄₁₆ 1.6

⁵⁄₈ 15.9

2⁹⁄₁₆ 64.7

2⁹⁄₃₂ 57.9

2¹⁄₂ 60.3

7³⁄₃₂ 172.2

¹¹⁄₁₆ 17.8

5.4

1¹⁵⁄₁₆ 2

FX3-Y231Ng FX3-Y2E32Ng

4⁹⁄₁₆ 115.9

6³⁄₁₆ 157.16

2¹⁵⁄₃₂ 62.71

⁹⁄₁₆ 14

⁵⁄₃₂ 4.0

³⁄₄ 19.0

2⁵⁷⁄₆₄ 73.4

2⁵⁄₈ 66.7

2³⁄₄ 69.8

7⁷⁄₁₆ 188.9

²⁵⁄₃₂ 19.8

6.6

2 2³⁄₁₆

FX3-Y232Ng FX3-Y235Ng

5 127.0

7¹⁄₄ 184.15

2¹³⁄₁₆ 71.44

⁵⁄₈ 16

⁵⁄₃₂ 4.0

¹³⁄₁₆ 20.6

3¹⁄₄ 82.6

2³¹⁄₃₂ 75.4

3 76.2

8¹⁄₂ 215.9

³¹⁄₃₂ 24.6

8.0

0.5

0.6

0.8

1.1

1.5

2.5

2.5

Bearing no. YG2B08NL YG210NL YG211NL YG212NL YG214NL YG215NL YG216NL YG218NL YG219NL YG2E20NL YG220NL YG222NL YG223NL YG224NL YG226NL YG227NL YG228NL

3.0

YG231NL YG2E32NL

3.6

YG232NL YG235NL

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" and smaller shaft sizes, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. K N lip seals standard. H labyrinth seals available. g Available with E3 triple lip seals. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-34

Intermediate Ball Bearing Flanged Units

FX3-W200E Cast Iron Housing 2-bolt Mounting Alignable Eccentric Cam Locking Collar Relubricatable Extended Inner Ring


Flanged unit number

A

B

D

F Bolts

G

H

J X

L

M

N

P

2¹⁄₈ 54.0 2⁷⁄₁₆ 61.9

3 76.20 3¹⁷⁄₃₂ 89.69

1¹⁄₈ 28.58 1⁷⁄₃₂ 30.96

³⁄₈ 10 ³⁄₈ 10

²³⁄₆₄ 9.1 ⁷⁄₁₆ 11.1

¹⁄₂ 12.7 ⁹⁄₁₆ 14.3

1²⁵⁄₃₂ 45.2 2¹⁄₆₄ 51.2

1³¹⁄₆₄ 37.7 1²¹⁄₃₂ 42.1

1¹⁄₈ 28.6 1⁵⁄₁₆ 33.3

3⁷⁄₈ 98.4 4¹³⁄₃₂ 111.9

¹⁵⁄₃₂ 11.9 ²⁹⁄₆₄ 11.5

¹⁄₂ ⁵⁄₈

FX3-W2B08E FX3-W210E

³⁄₄

FX3-W212E

⁷⁄₈ ¹⁵⁄₁₆ 1

FX3-W214E FX3-W215E FX3-W216E

2¹¹⁄₁₆ 68.3

3⁵⁷⁄₆₄ 98.82

1⁷⁄₃₂ 30.96

⁷⁄₁₆ 10

²⁹⁄₆₄ 11.5

¹⁹⁄₃₂ 15.1

2 50.8

1⁴³⁄₆₄ 42.5

1¹⁄₂ 38.1

4²⁹⁄₃₂ 124.6

²⁷⁄₆₄ 10.7

1.4

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

FX3-W218E FX3-W219E FX3-W2E20E

3³⁄₁₆ 81.0

4¹⁹⁄₃₂ 116.68

1¹³⁄₃₂ 35.72

⁷⁄₁₆ 10

²⁷⁄₆₄ 10.7

¹⁹⁄₃₂ 15.1

2¹⁵⁄₆₄ 56.7

1⁵³⁄₆₄ 64.4

1³⁄₄ 44.4

5¹⁹⁄₃₂ 142.1

³³⁄₆₄ 13.1

2.1

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


3⁵⁄₈ 92.1

5¹⁄₈ 130.18

1¹⁷⁄₃₂ 38.89

¹⁄₂ 12

⁷⁄₁₆ 11.1

⁵⁄₈ 15.9

2²³⁄₆₄ 59.9

1³¹⁄₃₂ 50.0

2³⁄₁₆ 55.6

6¹⁄₈ 155.6

⁹⁄₁₆ 14.3

3.0

1¹⁄₂

FX3-W224E

4 101.6

5²¹⁄₃₂ 143.67

1²³⁄₃₂ 43.66

¹⁄₂ 12

¹⁵⁄₃₂ 11.9

⁵⁄₈ 15.9

2³⁵⁄₆₄ 64.7

2³⁄₁₆ 55.6

2³⁄₈ 60.3

6²⁵⁄₃₂ 172.2

³⁹⁄₆₄ 15.5

4.0

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


4¹⁄₄ 108.0

5²⁷⁄₃₂ 148.43

1²³⁄₃₂ 43.66

¹⁄₂ 12

¹⁵⁄₃₂ 11.9

⁵⁄₈ 15.9

2⁹⁄₁₆ 65.1

2³⁄₁₆ 55.6

2¹⁄₂ 63.5

7³⁄₃₂ 180.2

¹⁹⁄₃₂ 15.1

4.7

1¹⁵⁄₁₆ 2

FX3-W231E FX3-W2E32E

4⁹⁄₁₆ 115.9

6³⁄₁₆ 157.16

1²³⁄₃₂ 43.66

⁹⁄₁₆ 14

¹¹⁄₁₆ 17.5

³⁄₄ 19.0

2⁵⁷⁄₆₄ 73.4

2¹³⁄₃₂ 61.1

2³⁄₄ 69.8

7⁷⁄₁₆ 188.9

⁹⁄₁₆ 14.3

5.7

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" and smaller shaft sizes, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-35

Unit wt. (lbs./kg) .6 0.3 1.0 0.4

0.6

1.0

1.4

1.8

2.1

2.6

Bearing no. WG2B08EL WG210EL WG212EL WG214EL WG215EL WG216EL WG218EL WG219EL WG2E20EL WG220EL WG222EL WG223EL WG224EL WG226EL WG227EL WG228EL WG231EL WG2E32EL


FX3-S200E Cast Iron Housing 2-bolt Mounting Alignable Spring Locking Relubricatable Extended Inner Ring Available in Nickel Plate k Available in DURA-KLEAN K


Flanged unit number

A

B

D

F Bolts

G

H

J X

L

N

P

Unit wt. (lbs./kg)

³⁄₄

FX3-S212E

2⁷⁄₁₆ 61.9

3¹⁷⁄₃₂ 89.69

1¹⁄₈ 28.58

³⁄₈ 10

²³⁄₆₄ 9.1

⁹⁄₁₆ 14.3

2¹⁄₆₄ 51.2

1³¹⁄₆₄ 37.7

4¹³⁄₃₂ 111.9

⁹⁄₃₂ 7.1

1.1

⁷⁄₈ ¹⁵⁄₁₆ 1

FX3-S214E FX3-S215E FX3-S216E

2¹¹⁄₁₆

3⁵⁷⁄₆₄

1³⁄₁₆

⁷⁄₁₆

³⁄₈

¹⁹⁄₃₂

2

1⁹⁄₁₆

4²⁹⁄₃₂

⁵⁄₁₆

1.5 1.5 1.4

68.3

98.82

30.17

10

9.5

15.1

50.8

39.7

124.6

7.9

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

FX3-S218E FX3-S219E FX3-S2E20E

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


3³⁄₁₆

4¹⁹⁄₃₂

1¹¹⁄₃₂

⁷⁄₁₆

²⁵⁄₆₄

¹⁹⁄₃₂

2¹⁵⁄₆₄

1⁴⁷⁄₆₄

5¹⁹⁄₃₂

²⁷⁄₆₄

81.0

116.68

34.13

10

9.9

15.1

56.7

44.0

142.1

10.7

3⁵⁄₈

5¹⁄₈

1⁹⁄₁₆

¹⁄₂

²³⁄₆₄

⁵⁄₈

2²³⁄₆₄

1⁵⁹⁄₆₄

6¹⁄₈

³³⁄₆₄

92.1

130.18

39.69

12

9.1

15.9

59.9

48.8

155.6

13.1

.50

.64

.95

5²¹⁄₃₂ 143.67

1¹¹⁄₁₆ 42.87

¹⁄₂ 12

²⁷⁄₆₄ 10.7

⁵⁄₈ 15.9

2³⁵⁄₆₄ 64.7

2⁷⁄₆₄ 53.6

6²⁵⁄₃₂ 172.2

¹⁷⁄₃₂ 13.5

3.8

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


4¹⁄₄

5²⁷⁄₃₂

1⁴⁹⁄₆₄

¹⁄₂

³⁄₈

⁵⁄₈

2⁹⁄₁₆

2⁹⁄₆₄

7³⁄₃₂

³⁵⁄₆₄

4.4 4.4 4.3

1¹⁵⁄₁₆

FX3-S231E

148.43

44.85

12

9.5

15.9

65.1

54.4

180.2

13.9

1⁵¹⁄₆₄ 45.64

⁹⁄₁₆ 14

¹⁹⁄₃₂ 15.1

³⁄₄ 19.0

2⁵⁷⁄₆₄ 73.4

2²⁵⁄₆₄ 60.7

7⁷⁄₁₆ 188.9

³⁵⁄₆₄ 13.9


4 101.6

6³⁄₁₆ 157.16


2.8 2.7 2.6

FX3-S224E

4⁹⁄₁₆ 115.9

SG212EL SG214EL SG215EL SG216EL

2.2 2.1 2.1

1¹⁄₂

108.0


1.73


1.95 5.6 2.54

SG231EL

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. K DURA-KLEAN coated housings available; add prefix W, i.e. WFX3-S212E. k Nickel plated housings available, add suffix K75, i.e. FX3-S212EK75. Nickel plated units are furnished prelubricated with food grade grease and black oxide coated inner and outer rings. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-36


F3-U200N Cast Iron Housing 4-bolt Mounting Alignable Spring Locking Relubricatable Wide Inner Ring Available in Nickel Plate k


inches ¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

17 ³⁄₄ 20

B

D

E

F Bolts

G

H

J X

L

N

P

Unit wt. (lbs./kg) 1.1 1.0 1.0

2¹⁄₈

2¹⁄₈

1³⁄₃₂

3

³⁄₈

⁵⁄₃₂

¹⁄₂

1²⁵⁄₃₂

1¹⁄₄

...

3⁷⁄₈

¹⁄₄

54.0

53.98

27.78

76.2

10

4.0

12.7

45.2

31.8

...

98.4

6.4

F3-U212N F3-U2M20N

2⁷⁄₁₆ 61.9

2¹⁄₂ 63.50

1⁹⁄₃₂ 32.54

3³⁄₈ 85.7

³⁄₈ 10

¹³⁄₆₄ 5.2

⁹⁄₁₆ 14.3

2¹⁄₆₄ 51.2

1³¹⁄₆₄ 37.7

... ...

4¹³⁄₃₂ 111.9

⁹⁄₃₂ 7.1

1.5

2¹¹⁄₁₆

2³⁄₄

1²³⁄₆₄

3³⁄₄

⁷⁄₁₆

³⁄₁₆

¹⁹⁄₃₂

2

1³⁵⁄₆₄

...

4²⁹⁄₃₂

¹⁹⁄₆₄

1.9 1.9 1.8

68.3

69.85

34.53

95.2

10

4.8

15.1

50.8

39.3

...

124.6

7.5

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

F3-U218N F3-U219N F3-U2E20N F3-U2M30N

3³⁄₁₆

3¹⁄₄

1⁹⁄₁₆

4¹⁄₄

⁷⁄₁₆

¹¹⁄₆₄

¹⁹⁄₃₂

2¹⁵⁄₆₄

1⁴⁷⁄₆₄

...

5¹⁹⁄₃₂

⁷⁄₁₆

81.0

82.55

39.69

108.0

10

4.4

15.1

56.7

44.0

...

142.1

11.1

1⁴⁹⁄₆₄

4⁵⁄₈

¹⁄₂

⁵⁄₃₂

⁵⁄₈

2²³⁄₆₄

1⁵⁹⁄₆₄

...

6¹⁄₈

³³⁄₆₄

F3-U220Ng F3-U222Ng F3-U223Ng F3-U2M35N

3⁵⁄₈

3⁵⁄₈

92.1

92.08

44.85

117.5

12

4.0

15.9

59.9

48.8

...

155.6

13.1

1¹⁄₂

F3-U224Ng F3-U2M40N

4 101.6

4 101.60

1²⁹⁄₃₂ 48.42

5¹⁄₈ 130.2

¹⁄₂ 12

¹¹⁄₆₄ 4.4

⁵⁄₈ 15.9

2³⁵⁄₆₄ 64.7

2⁵⁄₆₄ 52.8

... ...

6²⁵⁄₃₂ 172.2

¹⁄₂ 12.7

5.0

4¹⁄₄

4¹⁄₈

2¹⁄₃₂

5³⁄₈

¹⁄₂

⁷⁄₆₄

⁵⁄₈

2⁹⁄₁₆

2⁹⁄₆₄

...

7³⁄₃₂

³⁵⁄₆₄

6.2 6.2 6.1

108.0

104.78

51.59

136.5

12

2.8

15.9

65.1

54.4

...

180.2

13.9

4¹⁄₂

4³⁄₈

2³⁄₃₂

5⁵⁄₈

¹⁄₂

¹³⁄₆₄

³⁄₄

2¹³⁄₁₆

2¹⁹⁄₆₄

...

7⁷⁄₁₆

⁹⁄₁₆

114.3

111.12

53.18

142.9

12

5.2

19.0

71.4

58.3

...

188.9

14.3

40 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 45


1¹⁵⁄₁₆ 2

F3-U231Ng F3-U2E32Ng F3-U2M50N

2 2³⁄₁₆

F3-U232Ng F3-U235Ng FE-U2M55N

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆

F3-U236N F3-U238N F3-U239N F3-U2M60N

50

55

60 2¹⁄₂ 2¹¹⁄₁₆

F3-U240N F3-U243N F3-U2M65N

2³⁄₄ 2¹⁵⁄₁₆ 3

F3-U244N F3-U247N F3-U2E48N F3-U2M75N

65

75 3⁷⁄₁₆ 3¹⁄₂

F3-U255N F3-U2E56N F3-U2M85N

4¹⁵⁄₁₆

5¹⁄₈

2¹⁄₄

6³⁄₈

⁵⁄₈

⁵⁄₁₆

²⁹⁄₃₂

3¹¹⁄₆₄

2⁹⁄₁₆

...

8¹⁄₂

⁵⁄₈

125.4

130.18

57.15

161.9

16

7.9

23.0

80.6

65.1

...

215.9

15.9

5³⁄₈

5⁵⁄₈

2¹⁄₂

6⁷⁄₈

⁵⁄₈

¹¹⁄₃₂

¹⁵⁄₁₆

3²⁵⁄₆₄

2²⁷⁄₃₂

...

9⁷⁄₃₂

⁴¹⁄₆₄

136.5

142.88

63.50

174.6

16

8.7

23.8

86.1

72.2

...

234.2

16.3

5⁷⁄₈

5⁷⁄₈

2¹¹⁄₁₆

7³⁄₈

⁵⁄₈

³⁄₃₂

³⁄₄

3⁵⁄₃₂

2²⁵⁄₃₂

4³⁄₁₆

9¹³⁄₁₆

⁵⁄₈

149.2

149.22

68.26

187.3

16

2.4

19.0

80.2

70.6

106.4

249.2

15.9

6³⁄₈

6

2⁷⁄₈

7³⁄₄

³⁄₄

³⁄₃₂

³⁄₄

3³⁄₈

2³¹⁄₃₂

4⁵⁄₈

10¹⁄₄

¹¹⁄₁₆

161.9

152.40

73.02

196.8

20

2.4

19.0

85.7

75.4

117.5

260.4

17.5

7¹⁄₂

6³⁄₄

3⁹⁄₁₆

8⁹⁄₁₆

³⁄₄

³⁄₃₂

1

4¹⁄₃₂

3²¹⁄₃₂

5³⁄₁₆

11³⁄₈

³⁄₄

190.5

171.45

90.49

217.5

20

2.4

25.4

102.4

92.9

131.8

288.9

19.0

Bold face items are normally available from stock; please consult for availability of non-stock items. Shaft sizes over 2⁷⁄₁₆" have collars. Lubrication fitting tap size: for ¹¹⁄₁₆" (17 mm) and smaller shafts, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. K N lip seals standard. H labyrinth seals available. k Nickel plated housings available through size 239; add Suffix K75, i.e. F3-U2B08NK75. g Available with E3 triple lip seals.

Bearing no.

0.5


0.7

UG212NL UG2M20NL

0.9


1.3


1.7


2.3

UG224NL UG2M40NL

2.6


3.0


3.9


5.4


6.0


7.8


11.9


3.2 3.1 3.1

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆ 35

B-37

M Collar O.D.

F3-U2B08N F3-U210N F3-U211N F3-U2M17N


30

A

Lip seals

⁷⁄₈ ¹⁵⁄₁₆ 1 25

85


4.0 3.9 3.9

6.9 6.8 8.9 8.8 11.9 11.9 11.8 14.7 14.0 18.0 17.2 17.0 26.0 25.5

X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.


F3-Y200N Cast Iron Housing 4-bolt Mounting Alignable Eccentric Cam Locking Collar Relubricatable Wide Inner Ring



A

B

D

E

F Bolts

G

H

J X

L

Lip seals

M

N

P

Unit wt. (lbs./kg)

³⁄₄

F3-Y212N

2⁷⁄₁₆ 61.9

2¹⁄₂ 63.50

1²³⁄₃₂ 43.66

3³⁄₈ 85.7

³⁄₈ 10

¹⁄₁₆ 1.6

⁹⁄₁₆ 14.3

2¹⁄₆₄ 51.2

1⁵¹⁄₆₄ 45.6

1⁵⁄₁₆ 33.3

4¹³⁄₃₂ 111.9

³⁷⁄₆₄ 14.7

1.6

⁷⁄₈ ¹⁵⁄₁₆ 1

F3-Y214Ng F3-Y215Ng F3-Y216Ng

2¹¹⁄₁₆ 68.3

2³⁄₄ 69.85

1³⁄₄ 44.45

3³⁄₄ 95.2

⁷⁄₁₆ 10

¹⁄₁₆ 1.6

¹⁹⁄₃₂ 15.1

2 50.8

1¹³⁄₁₆ 46.0

1¹⁄₂ 38.1

4²⁹⁄₃₂ 124.6

³⁵⁄₆₄ 13.9

2.0

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

F3-Y218N F3-Y219N F3-Y2E20N

3³⁄₁₆ 81.0

3¹⁄₄ 82.55

1²⁹⁄₃₂ 48.42

4¹⁄₄ 108.0

⁷⁄₁₆ 10

¹⁄₁₆ 1.6

¹⁹⁄₃₂ 15.1

2¹⁵⁄₆₄ 56.7

1³¹⁄₃₂ 50.0

1³⁄₄ 44.4

5¹⁹⁄₃₂ 142.1

²¹⁄₃₂ 16.7

3.2

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


3⁵⁄₈ 92.1

3⁵⁄₈ 92.08

2¹⁄₆₄ 51.20

4⁵⁄₈ 117.5

¹⁄₂ 12

¹⁄₁₆ 1.6

⁵⁄₈ 15.9

2²³⁄₆₄ 59.9

2⁵⁄₆₄ 52.8

2³⁄₁₆ 55.6

6¹⁄₈ 155.6

¹¹⁄₁₆ 17.5

4.2

1¹⁄₂

F3-Y224Ng

4 101.6

4 101.60

2⁷⁄₃₂ 56.36

5¹⁄₈ 130.2

¹⁄₂ 12

¹⁄₁₆ 1.6

⁵⁄₈ 15.9

2³⁵⁄₆₄ 64.7

2⁹⁄₃₂ 57.9

2³⁄₈ 60.3

6²⁵⁄₃₂ 172.2

⁴⁵⁄₆₄ 17.8

5.3

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


4¹⁄₄ 108.0

4¹⁄₈ 104.78

2⁷⁄₃₂ 56.36

5³⁄₈ 136.5

¹⁄₂ 12

¹⁄₁₆ 1.6

⁵⁄₈ 15.9

2⁹⁄₁₆ 65.1

2⁹⁄₃₂ 57.9

2¹⁄₂ 63.5

7³⁄₃₂ 180.2

¹¹⁄₁₆ 17.5

6.5

1¹⁵⁄₁₆ 2

F3-Y231Ng F3-Y2E32Ng

4¹⁄₂ 114.3

4³⁄₈ 111.12

2¹⁵⁄₃₂ 62.71

5⁵⁄₈ 142.9

¹⁄₂ 12

¹⁄₁₆ 1.6

³⁄₄ 19.0

2¹³⁄₁₆ 71.4

2¹⁷⁄₃₂ 64.3

2³⁄₄ 69.8

7⁷⁄₁₆ 188.9

⁵¹⁄₆₄ 20.2

7.2

2 2³⁄₁₆

F3-Y232Ng F3-Y235Ng

4¹⁵⁄₁₆ 125.4

5¹⁄₈ 130.18

2¹³⁄₁₆ 71.44

6³⁄₈ 161.9

⁵⁄₈ 16

¹⁄₁₆ 1.6

²⁹⁄₃₂ 23.0

3¹¹⁄₆₄ 80.6

2⁷⁄₈ 73.0

3 76.2

8¹⁄₂ 215.9

¹⁵⁄₁₆ 23.8

9.5

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆

F3-Y236N F3-Y238N F3-Y239N

5³⁄₈ 136.5

5⁵⁄₈ 142.88

3¹⁄₁₆ 77.79

6⁷⁄₈ 174.6

⁵⁄₈ 16

¹⁄₁₆ 1.6

¹⁵⁄₁₆ 23.8

3²⁵⁄₆₄ 86.1

3¹⁄₈ 79.4

3⁵⁄₁₆ 84.1

9⁷⁄₃₂ 234.2

¹⁵⁄₁₆ 23.8

0.7

0.9

1.5

1.9

2.4

3.0

Bearing no. YG212NL YG214NL YG215NL YG216NL YG218NL YG219NL YG2E20NL YG220NL YG222NL YG223NL YG224NL YG226NL YG227NL YG228NL

3.3

YG231NL YG2E32NL

4.3

YG232NL YG235NL

12.5 5.7


Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" and smaller shaft sizes, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. K N lip seals standard. H labyrinth seals available. g Available with E3 triple lip seals. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-38


F3-W200E Cast Iron Housing 4-bolt Mounting Alignable Eccentric Cam Locking Collar Relubricatable Extended Inner Ring

Dimensions (inches/mm) Shaft dia. inches

Flanged unit

¹⁄₂ ⁵⁄₈

A

B

F3-W2B08E F3-W210E

2¹⁄₈ 54.0

2¹⁄₈ 53.98

³⁄₄

F3-W212E

2⁷⁄₁₆ 61.9

⁷⁄₈ ¹⁵⁄₁₆ 1

F3-W214E F3-W215E F3-W216E

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

D

E

F Bolts

G

H

M

N

P

1¹⁄₈ 28.58

3 76.2

³⁄₈ 10

²³⁄₆₄ 9.1

¹⁄₂ 12.7

1²⁵⁄₃₂ 45.2

1³¹⁄₆₄ 37.7

1¹⁄₈ 28.6

3⁷⁄₈ 98.4

¹⁵⁄₃₂ 11.9

.8

2¹⁄₂ 63.50

1⁷⁄₃₂ 30.96

3³⁄₈ 85.7

³⁄₈ 10

⁷⁄₁₆ 11.1

⁹⁄₁₆ 14.3

2¹⁄₆₄ 51.2

1²¹⁄₃₂ 42.1

1⁵⁄₁₆ 33.3

4¹³⁄₃₂ 111.9

²⁹⁄₆₄ 11.5

1.3 0.6

WG212EL

2¹¹⁄₁₆ 68.3

2³⁄₄ 69.85

1⁷⁄₃₂ 30.96

3³⁄₄ 95.2

⁷⁄₁₆ 10

²⁹⁄₆₄ 11.5

¹⁹⁄₃₂ 15.1

2 50.8

1⁴³⁄₆₄ 42.5

1¹⁄₂ 38.1

4²⁹⁄₃₂ 124.6

²⁷⁄₆₄ 10.7

1.8 0.8


F3-W218E F3-W219E F3-W2E20E

3³⁄₁₆ 81.0

3¹⁄₄ 82.55

1¹³⁄₃₂ 35.72

4¹⁄₄ 108.0

⁷⁄₁₆ 10

²⁷⁄₆₄ 10.7

¹⁹⁄₃₂ 15.1

2¹⁵⁄₆₄ 56.7

1⁵³⁄₆₄ 64.4

1³⁄₄ 44.4

5¹⁹⁄₃₂ 142.1

³³⁄₆₄ 13.1

2.9 1.3


1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

F3-W220E F3-W222E F3-W223E

3⁵⁄₈ 92.1

3⁵⁄₈ 92.08

1¹⁷⁄₃₂ 38.89

4⁵⁄₈ 117.5

¹⁄₂ 12

⁷⁄₁₆ 11.1

⁵⁄₈ 15.9

2²³⁄₆₄ 59.9

1³¹⁄₃₂ 50.0

2³⁄₁₆ 55.6

6¹⁄₈ 155.6

⁹⁄₁₆ 14.3

3.7 1.7


1¹⁄₂

F3-W224E

4 101.6

4 101.60

1²³⁄₃₂ 43.66

5¹⁄₈ 130.2

¹⁄₂ 12

¹⁵⁄₃₂ 11.9

⁵⁄₈ 15.9

2³⁵⁄₆₄ 64.7

2³⁄₁₆ 55.6

2³⁄₈ 60.3

6²⁵⁄₃₂ 172.2

³⁹⁄₆₄ 15.5

4.8 2.2

WG224EL

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

F3-W226E F3-W227E F3-W228E

4¹⁄₄ 108.0

4¹⁄₈ 104.78

1²³⁄₃₂ 43.66

5³⁄₈ 136.5

¹⁄₂ 12

¹⁵⁄₃₂ 11.9

⁵⁄₈ 15.9

2⁹⁄₁₆ 65.1

2³⁄₁₆ 55.6

2¹⁄₂ 63.5

7³⁄₃₂ 180.2

¹⁹⁄₃₂ 15.1

5.6 2.5


1¹⁵⁄₁₆ 2

F3-W231E F3-W2E32E

4¹⁄₂ 114.3

4³⁄₈ 111.12

1²³⁄₃₂ 43.66

5⁵⁄₈ 142.9

¹⁄₂ 12

¹⁹⁄₃₂ 15.1

³⁄₄ 19.0

2¹³⁄₁₆ 71.4

2⁵⁄₁₆ 58.7

2³⁄₄ 69.8

7⁷⁄₁₆ 188.9

³⁷⁄₆₄ 14.7

6.1 2.8

WG231EL WG2E32EL

number

J X

L

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" and smaller shaft sizes, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-39

Unit wt. (lbs./kg.)

0.4

Bearing no. WG2B08EL WG210EL


F3-S200E Cast Iron Housing 4-bolt Mounting Alignable Spring Locking Relubricatable Extended Inner Ring Available in Nickel Platek Available in DURA-KLEANK


Flanged unit number

A

B

D

E

F Bolts

G

H

J X

L

N

P

Unit wt. (lbs./kg)

³⁄₄

F3-S212E

2⁷⁄₁₆ 61.9

2¹⁄₂ 63.50

1¹⁄₈ 28.58

3³⁄₈ 85.7

³⁄₈ 10

²³⁄₆₄ 9.1

⁹⁄₁₆ 14.3

2¹⁄₆₄ 51.2

1³¹⁄₆₄ 37.7

4¹³⁄₃₂ 111.9

⁹⁄₃₂ 7.1

1.6

⁷⁄₈ ¹⁵⁄₁₆ 1

F3-S214E F3-S215E F3-S216E

2¹¹⁄₁₆

2³⁄₄

1³⁄₁₆

3³⁄₄

⁷⁄₁₆

³⁄₈

¹⁹⁄₃₂

2

1⁹⁄₁₆

4²⁹⁄₃₂

⁵⁄₁₆

2.0 1.9 1.9

68.3

69.85

30.17

95.2

10

9.5

15.1

50.8

39.7

124.6

7.9

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

F3-S218E F3-S219E F3-S2E20E

.73

.86

3¹⁄₄

1¹¹⁄₃₂

4¹⁄₄

⁷⁄₁₆

²⁵⁄₆₄

¹⁹⁄₃₂

2¹⁵⁄₆₄

1⁴⁷⁄₆₄

5¹⁹⁄₃₂

²⁷⁄₆₄

81.0

82.55

34.13

108.0

10

9.9

15.1

56.7

44.0

142.1

10.7

F3-S220E F3-S222E F3-S223E

3⁵⁄₈

3⁵⁄₈

1⁹⁄₁₆

4⁵⁄₈

¹⁄₂

²³⁄₆₄

⁵⁄₈

2²³⁄₆₄

1⁵⁹⁄₆₄

6¹⁄₈

³⁷⁄₆₄

92.1

92.08

39.67

117.5

12

9.1

15.9

59.9

48.8

155.6

14.7

1¹⁄₂

F3-S224E

4 101.6

4 101.60

1¹¹⁄₁₆ 42.87

5¹⁄₈ 130.2

¹⁄₂ 12

²⁷⁄₆₄ 10.7

⁵⁄₈ 15.9

2³⁵⁄₆₄ 64.7

2⁷⁄₆₄ 53.6

6²⁵⁄₃₂ 172.2

¹⁷⁄₃₂ 13.5

4.7

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

F3-S226E F3-S227E F3-S228E

4¹⁄₄

4¹⁄₈

1⁴⁹⁄₆₄

5³⁄₈

¹⁄₂

³⁄₈

⁵⁄₈

2⁹⁄₁₆

2⁹⁄₆₄

7³⁄₃₂

³⁵⁄₆₄

5.4 5.4 5.3

108.0

104.78

44.85

136.5

12

9.5

15.9

65.1

54.4

180.2

13.9

4¹⁄₂ 114.3

4³⁄₈ 111.12

1⁵¹⁄₆₄ 45.64

5⁵⁄₈ 142.9

¹⁄₂ 12

¹⁄₂ 12.7

³⁄₄ 19.0

2¹³⁄₁₆ 71.4

2¹⁹⁄₆₄ 58.3

7⁷⁄₁₆ 188.9

⁹⁄₁₆ 14.3

1¹⁵⁄₁₆

F3-S231E


2.7 2.6 2.6

3³⁄₁₆

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆



3.5 3.4 3.3

SG220EL SG222EL SG223EL 1.50 2.13


2.41 6.2 2.81

SG231EL

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. K DURA-KLEAN coated housings available; add prefix W, i.e. WF3-S212E. k Nickel plated housings available, add suffix K75, i.e. F3-S212EK75. Nickel plated units are furnished prelubricated with food grade grease and black oxide coated inner and outer rings X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-40

Standard Duty Ball Bearing Flanged Cartridge Units

FC3-U200N Cast Iron Housing 4-bolt Mounting Alignable Spring Locking Relubricatable Wide Inner Ring


inches ⁷⁄₈ ¹⁵⁄₁₆ 1

25

Lip seals FC3-U214Ng FC3-U215Ng FC3-U216N FC3-U2M25N

A †

B

C

D

F Bolts

G

H

L

M Collar O.D.

U

Y X

3.000

3⁵⁄₈

4³⁄₈

1²³⁄₆₄

³⁄₈

0

⁵⁄₈

⁵⁵⁄₆₄

...

¹⁄₂

1³⁄₈

76.20

92.08

111.1

34.53

10

0.0

15.9

21.8

...

12.7

34.9

3.375

4¹⁄₈

5

1⁹⁄₁₆

⁷⁄₁₆

0

¹³⁄₁₆

1⁹⁄₆₄

...

²⁷⁄₆₄

1⁴¹⁄₆₄

85.72

104.78

127.0

39.69

10

0.0

20.6

29.0

...

10.7

41.7

Unit wt. (lbs./kg) 3.0 3.0 2.9

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

FC3-U218N FC3-U219N FC3-U2E20N FC3-U2M30N

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

FC3-U220Ng FC3-U222Ng FC3-U223Ng FC3-U2M35N

3.625

4³⁄₈

5¹⁄₄

92.08

111.2

133.4

44.85

10

4.8

27.0

37.7

...

11.9

48.8

1¹⁄₂

FC3-U224Ng FC3-U2M40N

3.625 92.08

4³⁄₈ 111.12

5¹⁄₄ 133.4

1²⁹⁄₃₂ 48.42

⁷⁄₁₆ 10

¹⁄₃₂ 0.8

1¹⁄₃₂ 26.2

1¹⁵⁄₃₂ 37.3

... ...

¹⁵⁄₃₂ 11.9

1¹⁵⁄₁₆ 49.2

4.3

6¹⁄₈

2¹⁄₃₂

¹⁄₂

0

1¹⁄₁₆

1⁹⁄₁₆

...

¹⁵⁄₃₂

1⁶³⁄₆₄

6.3 6.3 6.2

30

35 40

1⁴⁹⁄₆₄

⁷⁄₁₆

³⁄₁₆

1¹⁄₁₆

1³¹⁄₆₄

...

¹⁵⁄₃₂

1⁵⁹⁄₆₄

1.3


2.0


2.1


2.0

UG224NL UG2M40NL

2.7


3.2

UG231NL UG2M50NL

4.6 4.5 4.5 4.7 4.6 4.6

FC3-U226Ng FC3-U227Ng FC3-U228Ng FC3-U2M45N

4.250

5¹⁄₈

107.95

130.18

155.6

51.59

12

0.0

27.0

39.7

...

11.9

50.4

1¹⁵⁄₁₆


4.500 114.30

5³⁄₈ 136.52

6³⁄₈ 161.9

2³⁄₃₂ 53.18

¹⁄₂ 12

¹¹⁄₆₄ 4.4

1¹³⁄₆₄ 30.6

1⁴¹⁄₆₄ 41.7

... ...

⁵⁄₈ 15.9

2⁵⁄₃₂ 54.8

7.4

2


4.500 114.30

5³⁄₈ 136.52

6³⁄₈ 161.9

2¹⁄₄ 57.15

¹⁄₂ 12

¹⁄₃₂ 0.8

1¹⁄₃₂ 26.2

1²¹⁄₃₂ 42.1

... ...

⁵⁄₈ 15.9

2¹⁷⁄₆₄ 57.5

7.7

UG232NL UG2M55NL

2 2³⁄₁₆

FC3-U232Ng FC3-U235Ng FC3-U2M55N

5.000

6

7¹⁄₈

2¹⁄₄

⁹⁄₁₆

⁵⁄₃₂

1

1¹⁷⁄₃₂

...

⁷⁄₈

2¹⁄₈

9.9 8.8

127.00

152.40

181.0

57.15

14

4.0

25.4

38.9

...

22.2

54.0


2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆

FC3-U236N FC3-U238N FC3-U239N FC3-U2M60N

5.500

6¹⁄₂

7⁵⁄₈

2¹⁄₂

⁹⁄₁₆

0

1

1⁵⁄₈

...

⁷⁄₈

2¹¹⁄₆₄

13.0 11.0 10.8

139.70

165.10

193.7

63.50

14

0.0

25.4

41.3

...

22.2

55.2


2¹⁄₂ 2¹¹⁄₁₆

FC3-U240N FC3-U243N FC3-U2M65N

6.375

7¹⁄₂

8³⁄₄

2¹¹⁄₁₆

⁵⁄₈

³⁄₁₆

1³⁄₁₆

1¹³⁄₁₆

4³⁄₁₆

1¹⁄₁₆

2³⁄₁₆

17.0 16.7

161.92

190.50

222.2

68.26

16

4.8

30.2

46.0

106.4

27.0

55.6

7.7


6.375

7¹⁄₂

8³⁄₄

2⁷⁄₈

⁵⁄₈

³⁄₁₆

1¹⁄₁₆

1¹³⁄₁₆

4⁵⁄₈

1¹⁄₄

2⁷⁄₃₂

161.92

190.50

222.2

73.02

16

4.8

27.0

46.0

117.5

31.8

56.4

8.1


15.6


19.0


50 55

55

60

65 2³⁄₄ 2¹⁵⁄₁₆ 3

FC3-U244N FC3-U247N FC3-U2E48N FC3-U2M75N

3⁷⁄₁₆ 3¹⁄₂

FC3-U255N FC3-U2E56N FC3-U2M85N

3¹⁵⁄₁₆ 4

FC3-U263N FC3-U2E64N FC3-U2M100N

75

85

7.375

8⁵⁄₈

10¹⁄₄

3⁹⁄₁₆

³⁄₄

0

1⁵⁄₈

2¹³⁄₃₂

5³⁄₁₆

1⁵⁄₃₂

2²⁵⁄₃₂

187.32

219.08

260.4

90.49

20

0.0

41.3

61.1

131.8

29.4

70.6

8.120

9³⁄₈

10⁷⁄₈

4¹⁄₄

³⁄₄

0

2¹⁄₈

3¹⁄₈

5¹⁵⁄₁₆

1¹⁄₈

3⁹⁄₁₆

206.25

238.12

276.2

107.95

20

0.0

54.0

79.4

150.8

28.6

90.5

17.9 17.7 17.5 34.0 33.6 42.0 41.5

Bold face items are normally available from stock; please consult for availability of non-stock items. Shaft sizes over 2⁷⁄₁₆" have collars. Lubrication fitting tap size: for FC3-U2E20N and smaller units, ¹⁄₄"-28 UNF; for all other units, ¹⁄₈" PT. K N lip seals standard. H labyrinth seals available. g Available with E3 triple lip seals. † Tolerance: +.000" –.002" (+0.00 mm –0.05 mm). Bore tolerance for mounting: +.002" –.000" (+0.05 mm –0.00 mm). X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-41

Bearing no.

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 45

100

Flanged cartridge unit number K

Standard Duty Ball Bearing Flanged Cartridge Units

FC3-Y200N Cast Iron Housing 4-bolt Mounting Alignable Eccentric Cam Locking Collar Relubricatable Wide Inner Ring


Flanged cartridge number K Lip seals

A †

B

C

D

F Bolts

H

L

M

U

Y X

Unit wt. (lbs./kg.)

Bearing no.

⁷⁄₈ ¹⁵⁄₁₆ 1

FC3-Y214Ng FC3-Y215Ng FC3-Y216Ng

3.000 76.20

3⁵⁄₈ 92.08

4³⁄₈ 111.1

1³⁄₄ 44.45

³⁄₈ 10

⁵⁄₈ 15.9

1¹⁄₈ 28.6

1¹⁄₂ 38.1

¹⁄₂ 12.7

1³⁄₈ 34.9

3.1

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

FC3-Y218N FC3-Y219N FC3-Y2E20N

3.375 85.72

4¹⁄₈ 104.78

5 127.0

1²⁹⁄₃₂ 48.42

⁷⁄₁₆ 10

¹³⁄₁₆ 20.6

1³⁄₈ 34.9

1³⁄₄ 44.4

²⁷⁄₆₄ 10.7

1⁴¹⁄₆₄ 41.7

4.6

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


3.625 92.08

4³⁄₈ 111.12

5¹⁄₄ 133.4

2¹⁄₆₄ 51.20

⁷⁄₁₆ 10

1¹⁄₁₆ 27.0

1²¹⁄₃₂ 42.1

2³⁄₁₆ 55.6

¹⁵⁄₃₂ 11.9

1⁵⁹⁄₆₄ 48.8

4.9

1¹⁄₂

FC3-Y224Ng

3.625 92.08

4³⁄₈ 111.12

5¹⁄₄ 133.4

2⁷⁄₃₂ 56.36

⁷⁄₁₆ 10

1¹⁄₃₂ 26.2

1⁴³⁄₆₄ 42.5

2³⁄₈ 60.3

¹⁵⁄₃₂ 11.9

1¹⁵⁄₁₆ 49.2

4.6

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


4.250 107.95

5¹⁄₈ 130.18

6¹⁄₈ 155.6

2⁷⁄₃₂ 56.36

¹⁄₂ 12

1¹⁄₁₆ 27.0

1⁴⁵⁄₆₄ 43.2

2¹⁄₂ 63.5

¹⁵⁄₃₂ 11.9

1⁶³⁄₆₄ 50.4

6.6

1¹⁵⁄₁₆

FC3-Y231Ng

4.500 114.30

5³⁄₈ 136.52

6³⁄₈ 161.9

2¹⁵⁄₃₂ 62.71

¹⁄₂ 12

1¹³⁄₆₄ 30.6

1⁷⁄₈ 47.6

2³⁄₄ 69.8

⁵⁄₈ 15.9

2⁵⁄₃₂ 54.8

7.7

2

FC4-Y232Ng

4.500 114.30

5³⁄₈ 136.52

6³⁄₈ 161.9

2¹³⁄₁₆ 71.44

¹⁄₂ 12

1¹⁄₃₂ 26.2

1³¹⁄₃₂ 50.0

3 76.2

⁵⁄₈ 15.9

2¹⁷⁄₆₄ 57.5

7.2

2 2³⁄₁₆

FC3-Y232Ng FC3-Y235Ng

5.000 127.00

6 152.40

7¹⁄₈ 181.0

2¹³⁄₁₆ 71.44

⁹⁄₁₆ 14

1 25.4

1²⁷⁄₃₂ 46.8

3 76.2

⁷⁄₈ 22.2

2¹⁄₈ 54.0

11.0 9.6

YG232NL YG235NL

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆

FC3-Y236N FC3-Y238N FC3-Y239N

5.500 139.70

6¹⁄₂ 165.10

7⁵⁄₈ 193.7

3¹⁄₁₆ 77.79

⁹⁄₁₆ 14

1 25.4

1²⁹⁄₃₂ 48.4

3⁵⁄₁₆ 84.1

⁷⁄₈ 22.2

2¹¹⁄₆₄ 55.2

12.7 12.4 12.2


1.4

2.1

2.2

2.1

3.0

3.5 3.3

YG214NL YG215NL YG216NL YG218NL YG219NL YG2E20NL YG220NL YG222NL YG223NL YG224NL YG226NL YG227NL YG228NL YG231NL YG232NL

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for FC3-Y2E20N and smaller units, ¹⁄₄"-28 UNF; for all other sizes, ¹⁄₈" PT. K N lip seals standard. H labyrinth seals available. g Available with E3 triple lip seals. † Tolerance: +.000" –.002" (+0.00 mm –0.05 mm). Bore tolerance for mounting + .002 –.000" (+0.05 mm –0.00 mm). X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-42


FX-W200E, FX-Y200N FX-WG200E, FX-YG200N High-test Iron Housing 2-bolt (Carriage) Mounting Alignable Eccentric Cam Locking Collar Optional Relubrication Feature Extended and Wide Inner Ring

Dimensions (inches/mm) Flanged unit number I Shaft NonNondia. relubricatable relubricatable inches Relubricatable Relubricatable K FX-W2B08E FX-Y2B08N ¹⁄₂ FX-WG2B08E FX-YG2B08N FX-W210E FX-Y210N ⁵⁄₈ FX-WG210E FX-YG210N ––––––– FX-Y211N ¹¹⁄₁₆ ––––––– FX-YG211N

E

D

F

NonCarriage W200 Y200 relubri- Relubri- bolt WG200 YG200 catable catable size

Unit wt. (lbs./kg.)

L

A

B

1²⁵⁄₃₂ 45.2

2¹⁄₂ 63.5

1¹⁄₈ 28.58

1¹⁵⁄₃₂ 37.31

2³⁄₁₆ 55.6

2³⁄₃₂ 53.2

¹⁄₄ ...

³⁄₈ 9.5

⁴⁵⁄₆₄ 17.8

1¹⁄₄ 31.8

H

K

W200 Y200 WG200 YG200

W200 WG200

Y200 YG200

M

N

1¹⁹⁄₆₄ 32.9

1¹⁄₈ 28.6

3³⁄₁₆ 81.0

.5 0.2

.6 0.2

³⁄₄

FX-W212E FX-WG212E

FX-Y212N FX-YG212N

2¹⁄₁₆ 52.4

2¹³⁄₁₆ 71.4

1⁷⁄₃₂ 30.96

1²³⁄₃₂ 43.66

2¹⁵⁄₃₂ 62.7

2³⁄₈ 60.3

⁵⁄₁₆ ...

²⁷⁄₆₄ 10.7

²⁵⁄₃₂ 19.8

1¹¹⁄₃₂ 34.1

1¹⁵⁄₃₂ 37.3

1⁵⁄₁₆ 33.3

3⁹⁄₁₆ 90.5

.7 0.3

.8 0.4

⁷⁄₈

FX-W214E FX-WG214E FX-W215E FX-WG215E FX-W216E FX-WG216E

FX-Y214Ng FX-YG214Ng FX-Y215Ng FX-YG215Ng FX-Y216Ng FX-YG216Ng

2⁹⁄₃₂ 57.9

3 76.2

1⁷⁄₃₂ 30.96

1³⁄₄ 44.45

2²³⁄₃₂ 69.0

2⁵⁄₈ 66.7

⁵⁄₁₆ ...

²⁷⁄₆₄ 10.7

²⁵⁄₃₂ 19.8

1¹¹⁄₃₂ 34.1

1³¹⁄₆₄ 37.7

1¹⁄₂ 38.1

3³⁄₄ 95.2

.8 0.4

1.0 0.5

FX-W218E FX-WG218E FX-W219E FX-WG219E FX-W2E20E FX-WG2E20E

FX-Y218N FX-YG218N FX-Y219N FX-YG219N FX-Y2E20N FX-YG2E20N

2²³⁄₃₂ 69.0

3⁹⁄₁₆ 90.5

1¹³⁄₃₂ 35.72

1²⁹⁄₃₂ 48.42

3³⁄₃₂ 78.6

3³⁄₃₂ 78.6

³⁄₈ ...

¹⁵⁄₃₂ 11.9

⁵⁷⁄₆₄ 22.6

1¹⁷⁄₃₂ 38.9

1²¹⁄₃₂ 42.1

1³⁄₄ 44.4

4⁷⁄₁₆ 112.7

1.2

FX-W220E FX-WG220E FX-W222E FX-WG222E FX-W223E FX-WG223E

FX-Y220Ng FX-YG220Ng FX-Y222Ng FX-YG222Ng FX-Y223Ng FX-YG223Ng

3¹⁄₈ 79.4

3¹⁵⁄₁₆ 100.0

1¹⁷⁄₃₂ 38.89

2¹⁄₆₄ 51.20

3¹⁄₂ 88.9

3¹⁄₂ 88.9

³⁄₈ ...

¹⁄₂ 12.7

¹⁵⁄₁₆ 23.8

1²¹⁄₃₂ 42.1

1²⁵⁄₃₂ 45.2

2³⁄₁₆ 55.6

4¹³⁄₁₆ 122.2

1.8

¹⁵⁄₁₆ 1 1¹⁄₈ 1³⁄₁₆ 1¹⁄₄ 1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ³⁄₄" and smaller shaft sizes, 10-32 UNF; for all other shafts, ¹⁄₄"-28 UNF. Also available with wide U200N inner ring. Replace "Y" with "U"; i.e. FX-U2B08N. For dimension D and U see page B-30. G Loading slots are on mounting face side for non-relubricatable units. I For replacement bearing number, drop prefix FX and add suffix L. K N lip seals standard. H labyrinth seals available. g Available with E3 triple lip seals. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-43

0.5

1.4 0.6

0.8

2.0 0.9


FXR-W200E, FXR-Y200N FXR-WG200E, FXR-YG200N High-test Iron Housing 2-bolt (Carriage) Inboard Mounting Alignable Eccentric Cam Locking Collar Optional Relubrication Feature Extended and Wide Inner Ring


¹¹⁄₁₆

Flanged unit number I Nonrelubricatable Relubricatable K FXR-W2B08E FXR-Y2B08N FXR-WG2B08E FXR-YG2B08N FXR-W210E FXR-Y210N FXR-WG210E FXR-YG210N ––––––– FXR-Y211N ––––––– FXR-YG211N

³⁄₄

FXR-W212E FXR-WG212E

FXR-Y212N FXR-YG212N

2¹³⁄₁₆ 71.4

1⁷⁄₃₂ 30.96

1²³⁄₃₂ 43.66

2¹⁵⁄₃₂ 62.7

⁵⁄₁₆ ...

²⁷⁄₆₄ 10.7

⁵⁹⁄₆₄ 23.4

1³⁄₆₄ 26.6

1⁵⁄₁₆ 33.3

3⁹⁄₁₆ 90.5

²³⁄₆₄ 9.1

2⁵⁄₃₂ 54.8

.7 0.3

⁷⁄₈

FXR-W214E FXR-WG214E FXR-W215E FXR-WG215E FXR-W216E FXR-WG216E

FXR-Y214Ng FXR-YG214Ng FXR-Y215Ng FXR-YG215Ng FXR-Y216Ng FXR-YG216Ng

3 76.2

1⁷⁄₃₂ 30.96

1³⁄₄ 44.45

2²³⁄₃₂ 69.0

⁵⁄₁₆ ...

²⁷⁄₆₄ 10.7

⁵⁹⁄₆₄ 23.4

1¹⁄₁₆ 27.0

1¹⁄₂ 38.1

3³⁄₄ 95.2

²³⁄₆₄ 9.1

2³⁄₈ 60.3

.8

FXR-W218E FXR-WG218E FXR-W219E FXR-WG219E FXR-W2E20E FXR-WG2E20E

FXR-Y218N FXR-YG218N FXR-Y219N FXR-YG219N FXR-Y2E20N FXR-YG3E20N

3⁹⁄₁₆ 90.5

1¹³⁄₃₂ 35.72

1²⁹⁄₃₂ 48.42

3³⁄₃₂ 78.6

³⁄₈ ...

¹⁵⁄₃₂ 11.9

1³⁄₆₄ 26.6

1³⁄₁₆ 30.2

1³⁄₄ 44.4

4⁷⁄₁₆ 112.7

²⁷⁄₆₄ 10.7

2¹³⁄₁₆ 71.4

1.2

FXR-W220E FXR-WG220E FXR-W222E FXR-WG222E FXR-W223E FXR-WG223E

FXR-Y220Ng FXR-YG220Ng FXR-Y222Ng FXR-YG222Ng FXR-Y223Ng FXR-YG223Ng

3¹⁵⁄₁₆ 100.0

1¹⁷⁄₃₂ 38.89

2¹⁄₆₄ 51.20

3¹⁄₂ 88.9

³⁄₈ ...

¹⁄₂ 12.7

1⁵⁄₃₂ 29.4

1⁹⁄₃₂ 32.5

2³⁄₁₆ 55.6

4¹³⁄₁₆ 122.2

⁷⁄₁₆ 11.1

3⁷⁄₃₂ 81.8

1.8

Shaft dia. inches ¹⁄₂ ⁵⁄₈

¹⁵⁄₁₆ 1 1¹⁄₈ 1³⁄₁₆ 1¹⁄₄ 1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

Nonrelubricatable Relubricatable

Fk

D B

W200 Y200 WG200 YG200

Unit wt. (lbs./kg.)

L

E

Carriage bolt size

H

W200 Y200 WG200 YG200

M

N

U

V

W200 WG200

2¹⁄₂ 63.5

1¹⁄₈ 28.58

1¹⁵⁄₃₂ 37.31

2³⁄₁₆ 55.6

¹⁄₄ ...

³⁄₈ 9.5

⁷⁄₈ 22.2

⁵⁹⁄₆₄ 23.4

1¹⁄₈ 28.6

3³⁄₁₆ 81.0

²¹⁄₆₄ 8.3

1⁷⁄₈ 47.6

.5

Y200 YG200

.6 0.2

0.2

.8 0.4

1.0 0.4

0.5

1.4 0.5

0.6

2.0 0.8

0.9

Please consult for availability. Lubrication fitting tap size: for ³⁄₄" and smaller shaft sizes, 10-32 UNF; for all other shafts, ¹⁄₄"-28 UNF. Also available with wide U200N inner ring. Replace "Y" with "U"; i.e. FXR-U2B08N. For dimension D and U see page B-30. K N lip seals standard. H labyrinth seals available. g Available with E3 triple lip seals. I For replacement bearing number, drop prefix FX and add suffix L. k Short shank square neck carriage bolt is not recommended. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-44


F-W200E, F-Y200N F-WG200E, F-YG200N High-test Iron Housing 3 and 4-bolt (Carriage) Mounting Alignable Eccentric Cam Locking Collar Optional Relubrication Feature Extended and Wide Inner Ring

Dimensions (inches/mm) Flanged unit number I A Style Shaft NonNonReluNonof dia. relubricatable reluhousing inches relubricatable Relubricatable brica- bricatable Relubricatable table K

C

W200 Y200 WG200 YG200

E

Unit wt. (lbs./kg.)

L K

W200 Y200 WG200 YG200

M

Y

W200 Y200 WG200 YG200

1²⁹⁄₃₂ 48.4

2¹⁄₂ 63.5

3³⁄₁₆ 81.0

1¹⁄₈ 1¹⁵⁄₃₂ 28.58 37.31

2³⁄₃₂ 53.2

¹⁄₄ ...

³⁄₈ 9.5

⁴⁵⁄₆₄ 17.8

1¹⁄₄ 31.8

1¹⁹⁄₆₄ 32.9

1¹⁄₈ . . . 28.6 . . .

1¹⁹⁄₃₂ 40.5

.5

¹¹⁄₁₆ ³⁄₄

F-W212E F-Y212N F-WG212E F-YG212N

2¹⁄₁₆ 52.4

2³⁄₁₆ 55.6

2¹³⁄₁₆ 71.4

3⁹⁄₁₆ 90.5

1⁷⁄₃₂ 1²³⁄₃₂ 2³⁄₈ 30.96 43.66 60.3

⁵⁄₁₆ ...

²⁷⁄₆₄ ²⁵⁄₃₂ 10.7 19.8

1¹¹⁄₃₂ 34.1

1¹⁵⁄₃₂ 37.3

1⁵⁄₁₆ . . . 33.3 . . .

1²⁵⁄₃₂ 45.2

.7

⁷⁄₈

F-W214E F-WG214E F-W215E F-WG215E F-W216E F-WG216E

F-Y214Ng F-YG214Ng F-Y215Ng F-YG215Ng F-Y216Ng F-YG216Ng

2⁹⁄₃₂ 57.9

2³⁄₈ 60.3

3 76.2

3³⁄₄ 95.2

1⁷⁄₃₂ 1³⁄₄ 2⁵⁄₈ 30.96 44.45 66.7

⁵⁄₁₆ ...

²⁷⁄₆₄ ²⁵⁄₃₂ 10.7 19.8

1¹¹⁄₃₂ 34.1

1³¹⁄₆₄ 37.7

1¹⁄₂ . . . 38.1 . . .

1⁷⁄₈ 47.6

.8

F-W218E F-Y218N F-WG218E F-YG218N F-W219E F-Y219N F-WG219E F-YG219N F-W2E20E F-Y2E20N F-WG2E20EF-YG2E20N

2²³⁄₃₂ 69.0

2¹³⁄₁₆ 71.4

3⁹⁄₁₆ 90.5

4⁷⁄₁₆ 1¹³⁄₃₂ 1²⁹⁄₃₂ 3³⁄₃₂ 112.7 35.72 48.42 78.6

³⁄₈ ...

¹⁵⁄₃₂ ⁵⁷⁄₆₄ 11.9 22.6

1¹⁷⁄₃₂ 38.9

1²¹⁄₃₂ 42.1

1³⁄₄ . . . 44.4 . . .

2⁷⁄₃₂ 1.2 1.4 56.4 0.5 0.6


3¹⁄₈ 79.4

3⁷⁄₃₂ 81.8

3¹⁵⁄₁₆ 4¹³⁄₁₆ 1¹⁷⁄₃₂ 2¹⁄₆₄ 3¹⁄₂ 100.0 122.2 38.89 51.20 88.9

³⁄₈ ...

¹⁄₂ ¹⁵⁄₁₆ 12.7 23.8

1²¹⁄₃₂ 42.1

1²⁵⁄₃₂ 45.2

2³⁄₁₆ . . . 55.6 . . .

2¹³⁄₃₂ 1.8 2.0 61.1 0.8 0.9

1⁷⁄₁₆

F-W220E F-WG220E F-W222E F-WG222E F-W223E F-WG223E

1¹⁄₂

F-W224E F-Y224Ng F-WG224E F-YG224Ng

3¹⁵⁄₃₂ 88.1

3²¹⁄₃₂ 92.9

4¹¹⁄₁₆ 5¹³⁄₁₆ 1²³⁄₃₂ 2⁷⁄₃₂ 3⁷⁄₈ 119.1 147.6 43.66 56.36 98.4

¹⁄₂ ...

⁵⁄₈ 1¹⁄₈ 15.9 28.6

1²⁹⁄₃₂ 48.4

2 50.8

2³⁄₈ 5¹³⁄₁₆ 60.3 147.6

... ...

2.8 3.0 1.3 1.4

3¹¹⁄₁₆ 93.7

3¹³⁄₁₆ 96.8

4³⁄₄ 5⁷⁄₈ 1²³⁄₃₂ 2⁷⁄₃₂ 4⁷⁄₃₂ 120.6 149.2 43.66 56.36 107.2

¹⁄₂ ...

⁵⁄₈ 1¹⁄₈ 15.9 28.6

1²⁹⁄₃₂ 48.4

2 50.8

2¹⁄₂ 5⁷⁄₈ 63.5 149.2

... ...

2.9 3.1 1.3 1.4

4¹⁄₁₆ 103.2

5 6¹⁄₈ 1²³⁄₃₂ 2¹⁵⁄₃₂ 4¹⁵⁄₃₂ 127.0 155.6 43.66 62.71 113.5

¹⁄₂ ...

⁵⁄₈ 1¹⁄₈ 15.9 28.6

1²⁹⁄₃₂ 48.4

2¹⁄₈ 54.0

2³⁄₄ 6¹⁄₈ 69.8 155.6

... ...

3.1

¹⁵⁄₁₆ 1 1¹⁄₈ 1³⁄₁₆ 1¹⁄₄ 1¹⁄₄ 1³⁄₈

F-W226E F-WG226E F-W227E 1¹¹⁄₁₆ F-WG227E F-W228E 1³⁄₄ F-WG228E 1⁵⁄₈

1¹⁵⁄₁₆ 2

F-W231E F-WG231E F-W2E32E F-WG2E32E


F-Y231Ng F-YG231Ng 3⁷⁄₈ F-Y2E32Ng 98.4 F-YG2E32Ng

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ³⁄₄" and smaller shaft sizes, 10-32 UNF; for all other shafts, ¹⁄₄"-28 UNF. Also available with wide U200N inner ring. Replace "Y" with "U"; i.e. F-U2B08N. For dimension D and U see page B-30. K N lip seals standard. H labyrinth seals available. g Available with E3 triple lip seals. I For replacement bearing number, drop prefix F and add suffix L. G Loading slots are on mounting face side for non-relubricatable units. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-45

N

1²⁵⁄₃₂ 45.2

⁵⁄₈

3-BOLT

B

Carriage H bolt size

F-W2B08E F-Y2B08N F-WG2B08EF-YG2B08N F-W210E F-Y210N F-WG210E F-YG210N – – – – – – F-Y211N – – – – – – F-YG211N

¹⁄₂

4-BOLT

F

D

.6 0.2

0.2

.8 0.3

0.4

1.0 0.4

0.5

3.6 1.4

1.6


FR-W200E, FR-Y200N FR-WG200E, FR-YG200N High-test Iron Housing 3 and 4-bolt (Carriage) Inboard Mounting Alignable Eccentric Cam Locking Collar Optional Relubrication Feature Extended and Wide Inner Ring

Dimensions (inches/mm) Style of housing

Shaft dia. inches

B

C

W200 Y200 WG200 YG200

Carriage E bolt size

L H

Unit wt. (lbs./kg.)

W200 Y200 WG200 YG200

M

U

V

Y

W200 Y200 WG200 YG200

2¹⁄₂ 63.5

3³⁄₁₆ 81.0

1¹⁄₈ 28.58

1¹⁵⁄₃₂ 37.31

2³⁄₃₂ 53.2

¹⁄₄ ...

³⁄₈ 9.5

⁷⁄₈ 22.2

⁵⁹⁄₆₄ 23.4

1¹⁄₈ 28.6

²¹⁄₆₄ 8.3

1⁷⁄₈ 47.6

1¹⁹⁄₃₂ 40.5

.5

¹¹⁄₁₆

FR-Y2B08N FR-YG2B08N FR-Y210N FR-YG210N FR-Y211N FR-YG211N

³⁄₄

FR-W212E FR-WG212E

FR-Y212N FR-YG212N

2¹³⁄₁₆ 71.4

3⁹⁄₁₆ 90.5

1⁷⁄₃₂ 30.96

1²³⁄₃₂ 43.66

2³⁄₈ 60.3

⁵⁄₁₆ ...

²⁷⁄₆₄ 10.7

⁵⁹⁄₆₄ 23.4

1³⁄₆₄ 26.6

1⁵⁄₁₆ 33.3

²³⁄₆₄ 9.1

2⁵⁄₃₂ 54.8

1²⁵⁄₃₂ 45.2

.7

⁷⁄₈

FR-W214E FR-WG214E FR-W215E FR-WG215E FR-W216E FR-WG216E

FR-Y214Ng FR-YG214Ng FR-Y215Ng FR-YG215Ng FR-Y216Ng FR-YG216Ng

3 76.2

3³⁄₄ 95.2

1⁷⁄₃₂ 30.96

1³⁄₄ 44.45

2⁵⁄₈ 66.7

⁵⁄₁₆ ...

²⁷⁄₆₄ 10.7

⁵⁹⁄₆₄ 23.4

1¹⁄₁₆ 27.0

1¹⁄₂ 38.1

²³⁄₆₄ 9.1

2³⁄₈ 60.3

1⁷⁄₈ 47.6

.8

FR-W218E FR-WG218E FR-W219E FR-WG219E FR-W2E20E FR-WG2E20E

FR-Y218N FR-YG218N FR-Y219N FR-YG219N FR-Y2E20N FR-YG2E20N

3⁹⁄₁₆ 90.5

4⁷⁄₁₆ 112.7

1¹³⁄₃₂ 35.72

1²⁵⁄₃₂ 48.42

3³⁄₃₂ 78.6

³⁄₈ ...

¹⁵⁄₃₂ 11.9

1³⁄₆₄ 26.6

1³⁄₁₆ 30.2

1³⁄₄ 44.4

²⁷⁄₆₄ 10.7

2¹³⁄₁₆ 71.4

2⁷⁄₃₂ 1.2 1.4 56.4 0.5 0.6


3¹⁵⁄₁₆ 4¹³⁄₁₆ 100.0 122.2

1¹⁷⁄₃₂ 38.89

2¹⁄₆₄ 51.20

3¹⁄₂ 88.9

³⁄₈ ...

¹⁄₂ 12.7

1⁵⁄₃₂ 29.4

1⁹⁄₃₂ 32.5

2³⁄₁₆ 55.6

⁷⁄₁₆ 11.1

3⁷⁄₃₂ 81.8

2¹³⁄₃₂ 1.8 2.0 61.1 0.8 0.9

1⁷⁄₁₆


1¹⁄₂

FR-W224E FR-WG224E

FR-Y224Ng FR-YG224Ng

4¹¹⁄₁₆ 5¹³⁄₁₆ 119.1 147.6

1²³⁄₃₂ 43.66

2⁷⁄₃₂ 56.36

3⁷⁄₈ 98.4

¹⁄₂ ...

⁵⁄₈ 15.9

1⁹⁄₃₂ 32.5

1³⁄₈ 34.9

2³⁄₈ 60.3

¹⁄₂ 12.7

3⁹⁄₁₆ 90.5

...

1⁵⁄₈



4³⁄₄ 5⁷⁄₈ 120.6 149.2

1²³⁄₃₂ 43.66

2⁷⁄₃₂ 56.36

2⁷⁄₃₂ 107.2

¹⁄₂ ...

⁵⁄₈ 15.9

1⁹⁄₃₂ 32.5

1³⁄₈ 34.9

2¹⁄₂ 63.5

¹⁄₂ 12.7

3²⁵⁄₃₂ 96.0

...

FR-W231E FR-WG231E FR-W2E32E FR-WG2E32E

FR-Y231Ng FR-YG231Ng FR-Y2E32Ng FR-YG2E32Ng

5 127.0

6¹⁄₈ 155.6

1²³⁄₃₂ 43.66

2¹⁵⁄₃₂ 62.7

4¹⁵⁄₃₂ ¹⁄₂ 113.5 . . .

⁵⁄₈ 15.9

1⁹⁄₃₂ 32.5

1¹⁄₂ 38.1

2³⁄₄ 69.8

¹⁄₂ 12.7

3³¹⁄₃₂ . . . 100.8

⁵⁄₈

¹⁵⁄₁₆ 3-BOLT

FK

D

FR-W2B08E FR-WG2B08E FR-W210E FR-WG210E –––––– ––––––

¹⁄₂

1 1¹⁄₈ 1³⁄₁₆ 1¹⁄₄ 1¹⁄₄ 1³⁄₈

4-BOLT

Flanged unit number I NonNonrelubricatable relubricatable Relubricatable Relubricatable K

1¹¹⁄₁₆ 1³⁄₄ 1¹⁵⁄₁₆ 2

.6 0.2

0.2

0.3

.8 0.4

1.0 0.4

2.8

0.5

3.0 1.3

2.9

1.4

3.1 1.3

3.1

1.4

3.6 1.4

1.6

Please consult for availability. Lubrication fitting tap size: for ³⁄₄" and smaller shaft sizes, 10-32 UNF; for all other shafts, ¹⁄₄"-28 UNF. Also available with wide U200N inner ring. Replace "Y" with "U"; i.e. FR-U2B08N. For dimension D and U see page B-30. K N lip seals standard. H labyrinth seals available. g Available with E3 triple lip seals. I For replacement bearing number, drop prefix FR and add suffix L. k Short shank square neck carriage bolt is not recommended. G For dimension N, see page B-45. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-46

Round Flanged Housings, 2-piece Formed Steel

MS, MSC 3-bolt or 4-bolt (Carriage) Mounting For Collar Mounted, Round, Square, or Hex Bore Bearings Alignable Non-relubricatable Bearing Not Included

3-Bolt Round

4-Bolt Round

Dimensions (inches/mm) Round housing style

Housing half number K

For collar mounted bearings Shaft diameter mm

40MSC1

in.

3-BOLT 4-BOLT

80MSC1

¹⁄₄ ...

⁹⁄₃₂ 7.14

¹³⁄₃₂ 10.3

.075 1.90

⁹⁄₃₂ 7.1

.006 .100 ... ...

1¹⁵⁄₁₆ 49.2

600 2 670

³⁄₄

212 2M20

...

...

⁵⁄₈ ¹¹⁄₁₆

204

2¹³⁄₁₆ 71.4

3⁹⁄₁₆ 90.5

⁵⁄₁₆ ...

¹¹⁄₃₂ 8.73

¹⁄₂ 12.7

.083 2.11

⁵⁄₁₆ 7.9

.021 .115 ... ...

2³⁄₁₆ 55.6

700 3 110

⁷⁄₈ ¹⁵⁄₁₆ 1

214 215 216 2M25

...

...

⁷⁄₈

205

3 76.2

3³⁄₄ 95.2

⁵⁄₁₆ ...

¹¹⁄₃₂ 8.73

¹⁄₂ 12.7

.083 2.11 .104 2.64

¹¹⁄₃₂ 8.7

.021 ... .000 ...

2³⁄₈ 60.3

800 3 560 1100 4 890

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

218 219 2E20 2M30

...

...

1

206

3⁹⁄₁₆ 90.5

4⁷⁄₁₆ 112.7

³⁄₈ ...

¹³⁄₃₂ 10.32

¹⁹⁄₃₂ 15.1

.104 2.64

¹¹⁄₃₂ 8.7

.011 .104 2¹³⁄₁₆ ... ... 71.4

1100 4 890

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

220 222 223 2M35

³⁄₈ 9.5

.011 ... .000 ... .000 ...

.104 ... .044 3³⁄₁₆ ... 81.0 .014 ...

1400 6 230 1700 7 560 1900 8 450

1¹⁄₂

224 2M40

.115 ... .073 ...

...

...

1¹⁄₈

207

3¹⁵⁄₁₆ 4¹³⁄₁₆ 100.0 122.2

³⁄₈ ...

¹³⁄₃₂ 10.32

¹⁹⁄₃₂ 15.1

.104 2.64 .134 3.40 .149 3.78

⁷⁄₈ 1³⁄₁₆ 1¹⁄₂

⁷⁄₈ 1 1¹⁄₈

1¹⁄₄

208

4¹¹⁄₁₆ 5¹³⁄₁₆ 119.1 147.6

¹⁄₂ ...

¹⁷⁄₃₂ 13.49

⁴⁹⁄₆₄ 19.4

.134 3.40

¹³⁄₃₂ 10.3

.013 .107 ... ...

3⁹⁄₁₆ 90.5

1700 7 560

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

226 227 228 2M45

1¹⁄₂ 45

1¹⁄₄

1¹⁄₂

209

4³⁄₄ 5⁷⁄₈ 120.6 149.2

¹⁄₂ ...

¹⁷⁄₃₂ 13.49

⁴⁹⁄₆₄ 19.4

.134 3.40

⁷⁄₁₆ 11.1

.013 .107 ... ...

3¹³⁄₁₆ 96.8

1700 7 560

1¹⁵⁄₁₆ 2

231 2E32 2M50

1³⁄₈ 1³⁄₄ 1¹⁵⁄₁₆

1¹⁄₈

1⁵⁄₈

210

5 127.0

6¹⁄₈ 155.6

¹⁄₂ ...

¹⁷⁄₃₂ 13.49

⁴⁹⁄₆₄ 19.4

.149 3.78

⁷⁄₁₆ 11.1

.000 .077 ... ...

4 101.6

1900 8 450

2 2³⁄₁₆

232 235 2M55

1⁵⁄₈ 2³⁄₁₆

1¹⁄₂

...

211

5⁷⁄₁₆ 6⁹⁄₁₆ 138.1 166.7

¹⁄₂ ...

¹⁷⁄₃₂ 13.49

⁴⁹⁄₆₄ 19.4

.149 3.78

¹⁵⁄₃₂ 11.9

.000 .077 ... ...

4⁷⁄₁₆ 112.7

1900 8 450

Please consult for availability. K Assembly requires two housing halves. Additional information, page B-76.

B-47

lbs/newtons

3³⁄₁₆ 81.0

50

55

V

Short Long shank shank

2¹⁄₂ 63.5

45

100MSC1

K

...

40

90MSC1

G

Radial load rating of housing assembly

...

35

85MSC1

Carriage bolt size

S Carriage bolts

...

30

72MSC1 72MS2 72MS3

C

H Stock thickness

...

25

62MSC1

B

Hole nominal ±.005" ±0.13 mm

2B08 210 211 2M17

20

52MSC1 52MS2

Shaft size Bearing Basic Round Square Hex size size bore bore bore number bearing

F

¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆ 17

47MSC1

For round, square and hex bore bearings

Triangular Flanged Housings, 2-piece Formed Steel

MSTR 3-bolt (Carriage) Mounting For Collar Mounted, Round, Square, or Hex Bore Bearings Alignable Non-relubricatable Bearing Not Included

Dimensions (inches/mm) Housing half number K 47MSTR

For collar mounted bearings

For round, square and hex bore bearings Shaft size Shaft Bearing Basic diameter Round Square Hex size size bore bore bore bearing mm in. number ³⁄₄

212 ... 2M20

⁷⁄₈ ¹⁵⁄₁₆ 1

214 215 ... 216 2M25

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

218 219 ... 2E20 2M30

20

52MSTR 25 62MSTR 30

F B

C

...

⁵⁄₈ ¹¹⁄₁₆

204

2¹³⁄₁₆ 3⁹⁄₁₆ 71.4 90.5

...

⁷⁄₈

205

3

...

1

206

Carriage bolt size

Hole nominal ±.005" ±0.13 mm

G

H

S

Stock thickness

J

Carriage bolt

K

N

T

V


Radial load rating of Y housing assembly lbs/newtons

⁵⁄₁₆ ...

¹¹⁄₃₂ 8.73

¹⁄₂ 12.7

.083 2.11

3 76.2

⁵⁄₁₆ 7.9

3 76.2

.021 .115 1¹⁄₁₆ ... ... 27.0

2³⁄₁₆ 1⁵⁄₁₆ 55.6 33.3

700 3 110

⁵⁄₁₆

¹¹⁄₃₂

¹⁄₂

.083

3⁵⁄₃₂

¹¹⁄₃₂

3⁵⁄₃₂

.021 .115 1⁷⁄₆₄

2³⁄₈

800

76.2 95.2

...

8.73

12.7

2.11

80.2

8.7

80.2

...

3⁹⁄₁₆

³⁄₈

¹³⁄₃₂

¹⁹⁄₃₂

.104

3¹¹⁄₁₆

¹¹⁄₃₂

3¹¹⁄₁₆

.011 .104 ³¹⁄₃₂

2¹³⁄₁₆ 1¹⁄₂

1100

...

10.32

15.1

2.64

93.7

8.7

93.7

...

71.4

4 890

3³⁄₄

4⁷⁄₁₆

90.5 112.7

...

...

1³⁄₈

28.2 60.3 34.9

24.6

38.1

3 560


B-48

Round Flanged Housings, 2-piece Formed Steel

GMSA, GMSB 3-bolt or 4-bolt (Carriage) Mounting For Collar Mounted, Round, Square, or Hex Bore Bearings Alignable Relubricatable Bearing Not Included

3-Bolt Round

4-Bolt Round

Dimensions (inches/mm) Round housing style

Housing

half number K


G52MSA 52MSC1

in. ⁷⁄₈ ¹⁵⁄₁₆ 1

⁷⁄₈

205

3 76.2

3³⁄₄ 95.2

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

218 219 2E20 2M30

...

...

1

206

3⁹⁄₁₆ 90.5

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

220 222 223 2M35

...

...

1¹⁄₈

1¹⁄₂

224

⁷⁄₈ 1³⁄₁₆ 1¹⁄₂

⁷⁄₈ 1 1¹⁄₈

3-BOLT 4-BOLT

40

G85MSA G85MSB

2M40

G100MSA G100MSB

⁵⁄₁₆ ...

G

H

S

Stock thickness

Carriage bolts

K

¹¹⁄₃₂ 8.73

¹⁄₂ 12.7

.083 2.11

¹¹⁄₃₂ 8.7

.021 .115 ... ...

4⁷⁄₁₆ ³⁄₈ 112.7 . . .

¹³⁄₃₂ 10.32

¹⁹⁄₃₂ 15.1

.104 2.64 .134 3.40

³⁄₈ 9.5

.011 ... .000 ...

207

3¹⁵⁄₁₆ 4¹³⁄₁₆ ³⁄₈ 100.0 122.2 . . .

¹³⁄₃₂ 10.32

¹³⁄₃₂ 15.1

.134 3.40

1¹⁄₄

208

4¹¹⁄₁₆ 5¹³⁄₁₆ 119.1 147.6

¹⁄₂ ...

¹⁷⁄₃₂ 13.49

⁴⁹⁄₆₄ 19.4

1¹⁄₄

1¹⁄₂

209

4³⁄₄ 5⁷⁄₈ ¹⁄₂ 120.6 149.2 . . .

¹⁷⁄₃₂ 13.49

lbs/newtons 2³⁄₈ 60.3

800 3 560

.104 ... 2¹³⁄₁₆ .044 71.4 ...

1100 4 890 1400 6 230

⁷⁄₁₆ 11.1

.000 .044 3³⁄₁₆ ... ... 81.0

1400 6 230

.149 3.78

⁵⁄₈ 15.9

.013 .107 ... ...

3⁹⁄₁₆ 90.5

1700 7 560

⁴⁹⁄₆₄ 19.4

.149 3.78

⁵⁄₈ 15.9

.013 .107 ... ...

3¹³⁄₁₆ 96.8

1700 7 560

1¹⁄₂ 45

1¹⁵⁄₁₆ 2

231 2E32 2M50

1³⁄₈ 1³⁄₄ 1¹⁵⁄₁₆

1¹⁄₈

1⁵⁄₈

210

5 6¹⁄₈ ¹⁄₂ 127.0 155.6 . . .

¹⁷⁄₃₂ 13.49

⁴⁹⁄₆₄ 19.4

.164 4.17

¹⁄₂ 12.7

.000 .077 ... ...

4 101.6

1900 8 450

2 2³⁄₁₆

232 235 2M55

1⁵⁄₈ 2³⁄₁₆

1¹⁄₂

...

211

5⁷⁄₁₆ 6⁹⁄₁₆ ¹⁄₂ 138.1 166.7 . . .

¹⁷⁄₃₂ 13.49

⁴⁹⁄₆₄ 19.4

.164 4.93

⁵⁄₈ 15.9

.000 .077 ... ...

4⁹⁄₁₆ 115.9

2300 10 230

Please consult for availability. K GMSA are housing halves with straight lube fittings; GMSB are housing halves without fittings. Assembly requires one of each. G G100MSA and G100MSB hole tolerance ±.015", ±.038 mm. Additional information, page B-76.

B-49

V



226 227 228 2M45

50

55

Carriage bolt size

F HoleG nominal ±.005" ±0.13 mm

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 45

G90MSA G90MSB

C

...

35 G80MSA G80MSB

B

...

30

G72MSA G72MSB

Shaft size Bearing Basic Round Square Hex size size bore bore bore number bearing 214 215 216 2M25

25 G62MSA G62MSB G62MSA-3 G62MSB-3


Flanged Housings, 2-piece Formed Steel

MST 2-bolt (Carriage) Mounting For Collar Mounted, Round, Square, or Hex Bore Bearings Alignable Non-relubricatable Bearing Not Included

Dimensions (inches/mm) Housing half number K


40MST

in. ¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

2B08 210 211 2M17

³⁄₄

212 2M20

⁷⁄₈ ¹⁵⁄₁₆ 1

214 215 216 2M25

17 47MST

20

52MST 25

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

62MST 30

Bearing size number

218 219 2E20 2M30


F Hole

B

Shaft size Basic Round Square Hex size bore bore bore bearing ...

V


58.7

...

7.14

10.3

1.90

7.1

81.0

...

49.2

2 670

...

204

2⁵⁄₈ 66.7

⁵⁄₁₆ ...

¹¹⁄₃₂ 8.73

¹⁄₂ 12.7

.083 2.11

⁵⁄₁₆ 7.9

3⁹⁄₁₆ 90.5

.021 .115 ... ...

2³⁄₁₆ 55.6

700 3 110

...

⁷⁄₈

205

3

2⁵¹⁄₆₄

⁵⁄₁₆

¹¹⁄₃₂

¹⁄₂

.083

¹¹⁄₃₂

3³⁄₄

.021 .115

2³⁄₈

800

76.2

71.0

...

8.73

12.7

2.11

8.7

95.2

...

60.3

3 560

3⁹⁄₁₆

3⁵⁄₁₆

³⁄₈

¹³⁄₃₂

¹⁹⁄₃₂

.104

¹¹⁄₃₂

4⁷⁄₁₆

.011 .104

2¹³⁄₁₆

1100

90.5

84.1

...

10.32

15.1

2.64

8.7

112.7

...

71.4

4 890

1

206

.075

⁹⁄₃₂

3³⁄₁₆

lbs/newtons

63.5

...

¹³⁄₃₂

N

2¹³⁄₁₆ 71.4

...

⁹⁄₃₂

K

⁵⁄₈ ¹¹⁄₁₆

...

¹⁄₄

G


2¹⁄₂

...

2⁵⁄₁₆

Car- nominal riage ±.005" bolt ±0.13 mm size

S Carriage bolt

...

...

...

E

H Stock thickness

.006 .100 ...

...

...

1¹⁵⁄₁₆

600


B-50

Standard Duty Ball Bearing Takeup Units

T3-U200N Cast Iron Housing Standard Slot Design Alignable Spring Locking Relubricatable Wide Inner Ring

Dimensions (inches/mm) Shaft diameter in.

mm

¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆ 17 ³⁄₄ 20

C

D

1.875

.281

¹⁄₂

⁴¹⁄₆₄

Y

Unit wt. (lbs./kg.)

27.78

42.9

27.0

14.3 76.2

20.6 57.2

47.62

7.14

12.7

16.3 30.6 49.2

T3-U212N T3-U2M20N

2¹⁄₂ 63.5

1⁷⁄₈ 47.6

1⁹⁄₃₂ 1¹¹⁄₁₆ 1¹⁄₁₆ 32.54 42.9 27.0

⁹⁄₁₆ 3⁵⁄₁₆ 14.3 84.1

¹⁵⁄₁₆ 23.8

2⁵⁄₈ 66.7

2.125 53.98

.281 7.14

¹⁄₂ 12.7

³⁄₄ 1⁵⁄₁₆ 2³⁄₃₂ 19.0 33.3 53.2

1.5

2³⁄₄

2

1²³⁄₆₄

⁹⁄₁₆

1

2⁷⁄₈

2.375

.281

¹⁄₂

⁵¹⁄₆₄

2.0

69.8

50.8 34.53 42.9

27.0

14.3 90.5

25.4 73.0

60.32

7.14

12.7

20.2 33.3 56.4

3¹⁄₄

2³⁄₈

1¹⁄₈

⁵⁄₈

1³⁄₃₂

3¹⁄₂

2.875

.406

⁹⁄₁₆

⁶¹⁄₆₄

1²⁹⁄₆₄ 2¹⁹⁄₃₂

82.6

60.3 39.69 47.6

28.6 15.9 106.4 27.8

88.9

73.02

10.31 14.3

24.2

36.9 65.9

1¹⁄₄

4

3.375

.406

1⁷⁄₆₄

1³⁵⁄₆₄ 2⁷⁄₈

93.7

T3-U224N T3-U2M40N

4¹⁄₁₆ 103.2

1⁹⁄₁₆

1⁴⁹⁄₆₄

1¹¹⁄₁₆ 1¹⁄₁₆

1⁷⁄₈

2

3

3⁹⁄₁₆

4³⁄₁₆

1³⁄₁₆

⁵⁄₈

1¹³⁄₆₄ 1¹⁵⁄₁₆

1⁵⁄₁₆

2⁷⁄₃₂

17.5

119.1 30.2 101.6

85.72

10.31 15.9

28.2 39.3 73.0

2⁷⁄₈ 73.0

1²⁹⁄₃₂ 2 1¹⁄₄ 48.42 50.8 31.8

¹¹⁄₁₆ 17.5

5¹⁄₈ 1¹¹⁄₃₂ 4¹⁄₈ 3.500 130.2 34.1 104.8 88.90

.406 ⁵⁄₈ 10.31 15.9

1¹¹⁄₆₄ 1⁴¹⁄₆₄ 3¹⁄₈ 29.8 41.7 79.4

4.5

⁷⁄₈

5³⁄₈

3.750

.406

1¹⁵⁄₆₄ 1²¹⁄₃₂ 3¹⁄₄

5.3 5.3 5.2

95.25

10.31 15.9

T3-U226N T3-U227N T3-U228N T3-U2M45N

4⁵⁄₁₆

3¹⁄₈

2¹⁄₃₂

109.5

79.4

51.59 57.2

36.5 22.2 136.5 34.9 114.3

T3-U231N T3-U2M50N

4⁹⁄₁₆ 115.9

3¹⁄₄ 82.6

2³⁄₃₂ 2¹⁄₄ 53.18 57.2

1⁷⁄₁₆ ⁷⁄₈ 5⁵⁄₈ 36.5 22.2 142.9

1¹³⁄₃₂ 4³⁄₄ 4.000 .406 ⁵⁄₈ 35.7 120.6 101.60 10.31 15.9

1¹⁷⁄₆₄ 1⁵³⁄₆₄ 3³⁄₈ 32.1 46.4 85.7

6.0

5

3³⁄₄

2¹⁄₄

2⁷⁄₈

1¹⁵⁄₁₆ 1¹⁄₈

1⁹⁄₁₆

1¹³⁄₃₂ 2¹⁄₆₄

7.6 7.5

127.0

95.2 57.15

73.0

49.2 28.6 158.8 39.7 133.4

T3-U232N T3-U235N T3-U2M55N

1⁷⁄₁₆

6¹⁄₄

1³⁄₈

4¹⁄₂

5¹⁄₄

4.500

.531

⁵⁄₈

³⁄₄

114.30 13.49 19.0

31.4

42.1 82.6

3²⁵⁄₃₂

35.7 51.2 96.0

0.9

UG212NL UG2M20NL

0.9


1.4


1.5


2.6

UG224NL UG2M40NL

2.3


2.6

UG231NL UG2M50NL

3.3


3.5 3.4 3.4

66.7 44.85 50.8 31.8

2¹⁄₄

0.4

3.0

4¹¹⁄₁₆

Bearing no. UG2B08NL UG210NL UG211NL UG2M17NL

1.0

¹¹⁄₁₆

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" (17 mm) and smaller shafts, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-51

W X

47.6

1¹⁄₂

2 2³⁄₁₆

2¹⁄₄

U

55.6

2⁵⁄₈

1¹⁵⁄₁₆

¹³⁄₁₆

T

⁹⁄₁₆

3¹¹⁄₁₆

50

L

1¹¹⁄₁₆ 1¹⁄₁₆

T3-U220N T3-U222N T3-U223N T3-U2M35N

45

K

J

1³⁄₃₂

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

H

1⁷⁄₈

T3-U218N T3-U219N T3-U2E20N T3-U2M30N

40

G

2³⁄₁₆

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

35

F

S +.005" –.015" (+0.13 –0.38)

T3-U2B08N T3-U210N T3-U211N T3-U2M17N

T3-U214N T3-U215N T3-U216N T3-U2M25N

30

A

N +.000" –.015" (+0.00 –0.38)

Lip seals

⁷⁄₈ ¹⁵⁄₁₆ 1 25

55

Takeup unit number

Intermediate Ball Bearing Takeup Units

T3-S200E Cast Iron Housing Standard Slot Design Alignable Spring Locking Relubricatable Extended Inner Ring

Dimensions (inches/mm) Shaft diameter

Takeup unit number

in.

Lip seals

A

C

D

F

G

H

J

K

L

N +.000" –.015" (+0.00 –0.38)

S +.005" –.015" (+0.13 –0.38)

T

U

W X

Y

Unit wt. (lbs./kg.)

³⁄₄

T3-S212E

2¹⁄₂ 63.5

1⁷⁄₈ 47.6

1¹⁄₈ 1¹¹⁄₁₆ 1¹⁄₁₆ 28.58 42.9 27.0

⁹⁄₁₆ 3⁵⁄₁₆ 14.3 84.1

¹⁵⁄₁₆ 2⁵⁄₈ 23.8 66.7

2.125 53.98

.281 7.14

¹⁄₂ ³⁄₄ 1⁵⁄₁₆ 12.7 19.0 33.3

2³⁄₃₂ 53.2

1.5

⁷⁄₈ ¹⁵⁄₁₆ 1

T3-S214E T3-S215E T3-S216E

2³⁄₄

2

1³⁄₁₆

⁹⁄₁₆

1

2.375

.281

¹⁄₂

¹³⁄₁₆

1⁵⁄₁₆

2⁷⁄₃₂

2.0

69.8

50.8 30.17 42.9

27.0

14.3 90.5

25.4 73.0

60.32

7.14

12.7

20.6

33.3

56.4

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

T3-S218E T3-S219E T3-S2E20E

3¹⁄₄

2³⁄₈

1¹⁄₈

⁵⁄₈

1³⁄₃₂

3¹⁄₂

2.875

.406

⁹⁄₁₆

⁶¹⁄₆₄

1²⁹⁄₆₄ 2¹⁹⁄₃₂

82.6

60.3 34.13 47.6

88.9

73.02

10.31

14.3

24.2

36.9

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

T3-S220E T3-S222E T3-S223E

1¹¹⁄₃₂

3¹¹⁄₁₆

2⁵⁄₈

1⁹⁄₁₆

93.7

66.7 39.67

1¹¹⁄₁₆ 1¹⁄₁₆

1⁷⁄₈

2

3⁹⁄₁₆

4³⁄₁₆

28.6 15.9 106.4 27.8 1¹⁄₄

¹¹⁄₁₆

4¹¹⁄₁₆

50.8 31.8

17.5

1³⁄₁₆

2⁷⁄₈

⁵⁄₈

1⁷⁄₆₄

1³⁵⁄₆₄ 2⁷⁄₈

119.1 30.2 101.6 85.72

10.31

15.9

28.2

39.3

3.375

1.4

73.0

2 1¹⁄₄ 50.8 31.8

¹¹⁄₁₆ 17.5

5¹⁄₈ 1¹¹⁄₃₂ 4¹⁄₈ 3.500 130.2 34.1 104.8 88.90

.406 10.31

⁵⁄₈ 1¹³⁄₆₄ 1⁴¹⁄₆₄ 3¹⁄₈ 15.9 30.6 41.7 79.4

4.5

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

T3-S226E T3-S227E T3-S228E

4⁵⁄₁₆

2¹⁄₄

⁷⁄₈

5³⁄₈

.406

⁵⁄₈

5.3 5.3 5.2

109.5 79.4 44.85 57.2

36.5 22.2 136.5 34.9 114.3

T3-S231E

4⁹⁄₁₆ 3¹⁄₄ 1⁵¹⁄₆₄ 2¹⁄₄ 115.9 82.6 45.64 57.2

1⁷⁄₁₆ ⁷⁄₈ 5⁵⁄₈ 36.5 22.2 142.9

1¹⁵⁄₁₆

1³⁄₈

4¹⁄₂

3.750 95.25

1¹³⁄₃₂ 4³⁄₄ 4.000 35.7 120.6 101.60

1¹⁵⁄₆₄ 1²¹⁄₃₂ 3¹⁄₄

10.31

15.9

31.4

.406 10.31

⁵⁄₈ 15.9

1¹⁷⁄₆₄ 1⁵³⁄₆₄ 3³⁄₈ 32.1 46.4 85.7

42.1


4¹⁄₁₆ 2⁷⁄₈ 1¹¹⁄₁₆ 103.2 73.0 42.87

1⁷⁄₁₆


3.5 3.4 3.4

T3-S224E

1⁴⁹⁄₆₄


3.0

1¹⁄₂

3¹⁄₈

SG212EL

0.9

65.9

.406

4

0.9

Bearing no.

2.6

82.6


2.3 6.0 2.6

SG231EL

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for ¹¹⁄₁₆" (17 mm) and smaller shafts, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-76.

B-52

Standard Duty Ball Bearing Takeup Units

TH3-U200N Cast Iron Housing Wide Slot Design Alignable Spring Locking Relubricatable Wide Inner Ring


Takeup unit number

inches

Lip seals

A

C

D

F

G

H

J

K

L

N +.000" –.015" (+0.00 –0.38)

S +.005" –.015" (+0.13 –0.38)

T

U

W X

Y

Unit wt. (lbs./kg.)

Bearing no.

³⁄₄

TH3-U212N

2²⁷⁄₃₂ 72.2

2¹⁄₄ 57.2

1⁹⁄₃₂ 32.54

1⁷⁄₈ 1¹⁄₄ 47.6 31.8

³⁄₄ 3³¹⁄₃₂ 19.0 100.8

1¹⁄₁₆ 3⁵⁄₈ 27.0 92.1

3.000 76.20

.531 ⁵⁄₈ 13.49 15.9

³⁄₄ 19.0

1⁵⁄₁₆ 33.3

2²¹⁄₃₂ 67.5

2.4

⁷⁄₈ ¹⁵⁄₁₆ 1

TH3-U214N TH3-U215N TH3-U216N

2²⁹⁄₃₂ 73.8

2¹⁄₄ 57.2

1²³⁄₆₄ 34.53

1²⁷⁄₃₂ 1¹⁄₄ 46.8 31.8

³⁄₄ 4¹⁄₃₂ 19.0 102.4

1³⁄₃₂ 3⁵⁄₈ 27.8 92.1

3.000 76.20

.531 ⁵⁄₈ 13.49 15.9

⁵¹⁄₆₄ 20.2

1⁵⁄₁₆ 33.3

2²¹⁄₃₂ 67.5

2.7

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

TH3-U218N TH3-U219N TH3-U2E20N

3¹¹⁄₃₂ 84.9

2¹⁄₂ 63.5

1⁹⁄₁₆ 39.69

2³⁄₁₆ 1⁷⁄₁₆ 55.6 36.5

⁷⁄₈ 4¹⁵⁄₃₂ 22.2 113.5

1³⁄₃₂ 4¹⁄₈ 3.500 27.8 104.8 88.90

.531 ⁵⁄₈ 13.49 15.9

⁶¹⁄₆₄ 24.2

1²⁹⁄₆₄ 2²⁷⁄₃₂ 36.9 72.2

3.2 1.5

UG218NL UG219NL UG2E20NL

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


3¹¹⁄₁₆ 93.7

2³⁄₄ 69.8

1⁴⁹⁄₆₄ 44.85

2⁵⁄₁₆ 1⁷⁄₁₆ 58.7 36.5

⁷⁄₈ 4¹³⁄₁₆ 22.2 122.2

1³⁄₁₆ 4¹⁄₈ 3.500 30.2 104.8 88.90

.531 ⁵⁄₈ 13.49 15.9

1⁷⁄₆₄ 28.2

1³⁵⁄₆₄ 2³¹⁄₃₂ 39.3 75.4

4.0 1.8

UG220NL UG222NL UG223NL

1¹⁄₂

TH3-U224N

4³⁄₁₆ 3¹⁄₄ 106.4 82.6

1²⁹⁄₃₂ 48.42

2²⁷⁄₃₂ 1¹⁵⁄₁₆ 1¹⁄₈ 5⁹⁄₁₆ 72.2 49.2 28.6 141.3

1⁵⁄₁₆ 4³⁄₄ 3.969 33.3 120.6 100.81

.688 ³⁄₄ 17.48 19.0

1¹¹⁄₆₄ 1⁴¹⁄₆₄ 3¹⁵⁄₃₂ 29.8 41.7 88.6

5.3

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


4³⁄₁₆ 3¹⁄₄ 106.4 82.6

2¹⁄₃₂ 51.59

2⁷⁄₈ 1¹⁵⁄₁₆ 1¹⁄₈ 5⁹⁄₁₆ 73.0 49.2 28.6 141.3

1³⁄₈ 4³⁄₄ 3.969 34.9 120.6 100.81

.688 ³⁄₄ 17.48 19.0

1¹⁵⁄₆₄ 1²¹⁄₃₂ 3¹⁵⁄₃₂ 31.4 42.1 88.6

5.3

1¹⁵⁄₁₆ 2

TH3-U231N TH3-U2E32N

4⁹⁄₁₆ 3³⁄₈ 115.9 85.7

2³⁄₃₂ 53.18

2⁷⁄₈ 1¹⁵⁄₁₆ 1¹⁄₈ 5¹⁵⁄₁₆ 73.0 49.2 28.6 150.8

1⁴³⁄₆₄ 4³⁄₄ 3.969 42.5 120.6 100.81

.688 ³⁄₄ 17.48 19.0

1¹⁷⁄₆₄ 1²⁵⁄₃₂ 3¹⁹⁄₃₂ 32.1 45.2 91.3

6.6

2 2³⁄₁₆

TH3-U232N TH3-U235N

5⁷⁄₁₆ 4 138.1 101.6

2¹⁄₄ 57.15

3¹⁹⁄₃₂ 2¹⁄₂ 91.3 63.5

1³⁄₈ 7⁷⁄₁₆ 34.9 188.9

1³⁄₄ 5⁷⁄₈ 5.094 44.4 149.2 129.39

1.062 1¹⁄₄ 26.97 31.8

1¹³⁄₃₂ 2¹⁄₆₄ 35.7 51.2

4²³⁄₃₂ 119.8

13.5 6.1

UG232NL UG235NL

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆


5⁷⁄₁₆ 4 138.1 101.6

2¹⁄₂ 63.50

3¹⁹⁄₃₂ 2¹⁄₂ 91.3 63.5

1³⁄₈ 7⁷⁄₁₆ 34.9 188.9

2¹⁄₁₆ 5⁷⁄₈ 5.094 52.4 149.2 129.39

1.062 1¹⁄₄ 26.97 31.8

1⁹⁄₁₆ 39.7

4²³⁄₃₂ 119.8

12.9 5.9


Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-53

2⁷⁄₆₄ 53.6

1.1

1.2

UG212NL UG214NL UG215NL UG216NL

2.4

UG224NL

2.4


3.0

UG231NL UG2E32NL

Intermediate Ball Bearing Takeup Units

TH3-S200E Cast Iron Housing Wide Slot Design Alignable Spring Locking Relubricatable Extended Inner Ring


Takeup unit number

inches

Lip seals

A

C

D

F

G

H

J

K

L

N +.000" –.015" (+0.00 –0.38)

S +.005" –.015" (+0.13 –0.38)

T

U

W X

Y

Unit wt. (lbs./kg.)

³⁄₄

TH3-S212E

2²⁷⁄₃₂ 72.2

2¹⁄₄ 57.2

1¹⁄₈ 28.58

1⁷⁄₈ 47.6

1¹⁄₄ ³⁄₄ 31.8 19.0

3³¹⁄₃₂ 100.8

1¹⁄₁₆ 27.0

3⁵⁄₈ 92.1

3.000 76.20

.531 13.49

⁵⁄₈ 15.9

³⁄₄ 19.0

1⁵⁄₁₆ 33.3

2²¹⁄₃₂ 67.5

2.4

⁷⁄₈ ¹⁵⁄₁₆ 1

TH3-S214E TH3-S215E TH3-S216E

2²⁹⁄₃₂ 73.8

2¹⁄₄ 57.2

1³⁄₁₆ 30.17

1²⁷⁄₃₂ 46.8

1¹⁄₄ ³⁄₄ 31.8 19.0

4¹⁄₃₂ 102.4

1³⁄₃₂ 27.8

3⁵⁄₈ 92.1

3.000 76.20

.531 13.49

⁵⁄₈ 15.9

¹³⁄₁₆ 20.6

1⁵⁄₁₆ 33.3

2²¹⁄₃₂ 67.5

2.7

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

TH3-S218E TH3-S219E TH3-S2E20E

3¹¹⁄₃₂ 84.9

2¹⁄₂ 63.5

1¹¹⁄₃₂ 34.13

2³⁄₁₆ 55.6

1⁷⁄₁₆ ⁷⁄₈ 36.5 22.2

4¹⁵⁄₃₂ 113.5

1³⁄₃₂ 27.8

4¹⁄₈ 3.500 104.8 88.90

.531 13.49

⁵⁄₈ 15.9

⁶¹⁄₆₄ 24.2

1²⁹⁄₆₄ 2²⁷⁄₃₂ 36.9 72.2

3.2

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


3¹¹⁄₁₆ 93.7

2³⁄₄ 69.8

1⁹⁄₁₆ 39.67

2⁵⁄₁₆ 58.7

1⁷⁄₁₆ ⁷⁄₈ 36.5 22.2

4¹³⁄₁₆ 122.2

1³⁄₁₆ 30.2

4¹⁄₈ 3.500 104.8 88.90

.531 13.49

⁵⁄₈ 15.9

1⁷⁄₆₄ 28.2

1³⁵⁄₆₄ 2³¹⁄₃₂ 39.3 75.4

4.0

1¹⁄₂

TH3-S224E

4³⁄₁₆ 106.4

3¹⁄₄ 82.6

1¹¹|₁₆ 42.87

2²⁷⁄₃₂ 72.2

1¹⁵⁄₁₆ 1¹⁄₈ 49.2 28.6

5⁹⁄₁₆ 141.3

1⁵⁄₁₆ 33.3

4³⁄₄ 3.969 .688 120.6 100.81 17.48

³⁄₄ 19.0

1¹³⁄₆₄ 1⁴¹⁄₆₄ 3¹⁵⁄₃₂ 30.6 41.7 88.6

5.3

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


4³⁄₁₆ 106.4

3¹⁄₄ 82.6

1⁴⁹⁄₆₄ 44.85

2⁷⁄₈ 73.0

1¹⁵⁄₁₆ 1¹⁄₈ 49.2 28.6

5⁹⁄₁₆ 141.3

1³⁄₈ 34.9

4³⁄₄ 3.969 .688 120.6 100.81 17.48

³⁄₄ 19.0

1¹⁵⁄₆₄ 1²¹⁄₃₂ 3¹⁵⁄₃₂ 31.4 42.1 88.6

5.3

1¹⁵⁄₁₆

TH3-S231E

4⁹⁄₁₆ 115.9

3³⁄₈ 85.7

1⁵¹⁄₆₄ 45.64

2⁷⁄₈ 73.0

1¹⁵⁄₁₆ 1¹⁄₈ 49.2 28.6

5¹⁵⁄₁₆ 150.8

1⁴³⁄₆₄ 4³⁄₄ 3.969 .688 42.5 120.6 100.81 17.48

³⁄₄ 19.0

1¹⁷⁄₆₄ 1²⁵⁄₃₂ 3¹⁹⁄₃₂ 32.1 45.2 91.3

6.6

1.1

Bearing no. SG212EL

1.2


1.5


1.8


2.4

SG224EL

2.4


3.0

SG231EL

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. X Width dimension for closed end unit. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-54

Standard Duty Ball Bearing Takeups

TAS3-U200N Formed Steel Frame Cast Iron Bearing Housing Alignable Spring Locking Relubricatable Wide Inner Ring TA3-U200N Takeup Unit Closed End

Open End

Dimensions (inches/mm) Shaft diameter mm

in. ¹⁵⁄₁₆ 1

25 1¹⁄₈ 1³⁄₁₆ 30 1¹⁄₄ 1⁷⁄₁₆ 35 1¹⁄₂ 40 1¹¹⁄₁₆ 1³⁄₄ 45 1⁵⁄₁₆ 50 2 2³⁄₁₆ 55

Adjustment 6

Takeup unit number

C

D

E

Lip seals

F Bolts

G

H

13¹⁄₄

1²³⁄₆₄

4⁷⁄₈

⁵⁄₁₆

4¹⁄₈

¹⁄₈

152.4

TAS3-U215N-6 TAS3-U216N-6 TAS3-U2M25N-6

336.5

34.53

123.8

8

104.8

3.2

6 12 6 12 152.4 304.8

TAS3-U218N-6 TAS3-U218N-12 TAS3-U219N-6 TAS3-U219N-12 TAS3-U2M30N-6 TAS3-U2M30N-12

15 21 15 21 381.0 533.4

6 12 6 12 152.4 304.8


15 21 15 21 381.0 533.4

9 18 228.6 457.2

TAS3-U224N-9 TAS3-U224N-18 TAS3-U2M40N-9 TAS3-U2M40N-18

19³⁄₄ 28³⁄₄ 501.6 730.2

9 18 9 18 228.6 457.2


19³⁄₄ 28³⁄₄ 19³⁄₄ 28³⁄₄ 501.6 730.2

9 18 228.6 457.2

TAS3-U231N-9 TAS3-U231N-18 TAS3-U2M50N-9 TAS3-U2M50N-18

19³⁄₄ 28³⁄₄ 501.6 730.2

9 18 9 18 228.6 457.2


21⁵⁄₈ 30⁵⁄₈ 21⁵⁄₈ 30⁵⁄₈ 549.3 777.9

1⁹⁄₁₆

6¹⁄₄

³⁄₈

5¹⁄₄

³⁄₁₆

39.69

158.8

10

133.4

4.8

1⁴⁹⁄₆₄

6¹⁄₄

³⁄₈

5¹⁄₄

³⁄₁₆

44.85

158.8

10

133.4

4.8

1²⁹⁄₃₂

7⁷⁄₈

³⁄₈

6⁵⁄₈

¹⁄₄

48.42

200.0

10

168.3

6.4

2¹⁄₃₂

7⁷⁄₈

³⁄₈

6⁵⁄₈

¹⁄₄

41.59

200.0

10

168.3

6.4

2³⁄₃₂

7⁷⁄₈

³⁄₈

6⁵⁄₈

¹⁄₄

53.18

200.0

10

168.3

6.4

2¹⁄₄ 57.15

8¹⁄₄ 209.6

¹⁄₂ 12

7¹⁄₈ 181.0

¹⁄₄ 6.4

J

K

L

M

R

S G

7³⁄₁₆

3³⁄₈

2⁵⁄₁₆

1³⁄₄

1¹⁄₂

198.4

85.7

58.7

44.4

38.1 114.3

8³⁄₁₆ 14³⁄₁₆ 8³⁄₁₆ 14³⁄₁₆ 208.0 360.4 8⁵⁄₁₆ 14⁵⁄₁₆ 8⁵⁄₁₆ 14⁵⁄₁₆ 211.1 363.5 11¹⁄₄ 20¹⁄₄ 285.8 514.4 11³⁄₁₆ 20³⁄₁₆ 11³⁄₁₆ 20³⁄₁₆ 284.2 512.8 11¹⁄₄ 20¹⁄₄ 285.8 514.4 11³⁄₁₆ 20³⁄₁₆ 11³⁄₁₆ 20³⁄₁₆ 284.2 512.8

3¹¹⁄₁₆

2⁷⁄₈

2³⁄₃₂

93.7

73.0

53.2

3³⁄₄

2⁷⁄₈

2⁷⁄₁₆

95.2

73.0

61.9

4¹⁄₂

3⁵⁄₈

2¹¹⁄₁₆

114.3 92.1

68.3

4⁵⁄₈

2⁷⁄₈

3⁵⁄₈

117.5

92.1

73.0

4⁵⁄₈

3⁵⁄₈

3¹⁄₈

117.5

92.1

79.4

5¹⁄₂

4¹⁄₄

139.7 108.0

3¹⁄₂ 88.9

4¹⁄₂

4⁷⁄₈ 5³⁄₈ 1⁵⁄₈ 4⁷⁄₈ 5³⁄₈ 123.8 41.3 136.5 4⁷⁄₈ 5³⁄₈ 4⁷⁄₈ 5³⁄₈ 123.8 41.3 136.5

1⁵⁄₈

5 6 127.0 41.3 152.4 1⁵⁄₈

5 6 5 6 127.0 41.3 152.4 1⁵⁄₈

5 6 127.0 41.3 152.4

1⁵⁄₈

5 6 2¹⁄₂ 5 6 127.0 63.5 152.4

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. Closed end takeups available, suffix "C" (optional). I On closed end takeup, bearing assembly is reversed. G Frames with 6" (152.4 mm) adjustment have six holes. Frames with 9" (228.6 mm) or 12" (304.8 mm) adjustment have eight holes. Frames with 18" (457.2 mm) adjustment have ten holes. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-55

T

V

W I

Y I

1⁵⁄₈

1⁵¹⁄₆₄

3³⁷⁄₆₄

2²⁷⁄₃₂

41.3

45.6

90.9

72.2

2¹⁄₈

2¹¹⁄₃₂

4¹⁹⁄₆₄

3¹⁄₂

54.0

59.5

109.1 88.9

2¹⁄₈

2³¹⁄₆₄

4⁷⁄₁₆

3³⁵⁄₆₄

54.0

63.1

112.7 90.1

2³⁄₄

3¹⁄₁₆

5⁹⁄₃₂

69.8

77.8

134.1 111.1

2³⁄₄

3¹⁄₁₆

5⁷⁄₁₆

4³⁄₈

4¹⁄₂

69.8

77.8

138.1 114.3

2³⁄₄

3¹⁄₁₆

5¹⁹⁄₃₂

69.8

77.8

142.1 115.1

3¹⁄₄ 82.6

3¹¹⁄₁₆ 93.7

6⁵⁄₁₆

4¹⁷⁄₃₂

5¹⁄₁₆

160.3 128.6

Unit wt. (lbs./kg.) 7.5 7.5 3.4 11.0 15.0 11.0 15.0 5.0 6.8 13.5 15.2 13.0 16.0 5.9 7.2 24.0 31.0 10.9 14.1 25.5 32.0 25.0 31.5 11.3 14.5 23.0 29.8 10.4 13.5 32.3 41.2 29.9 39.0 13.6 17.7

Unit no. TA3-U215N TA3-U216N TA3-U2M25N TA3-U218N TA3-U219N TA3-U2M30N TA3-U220N TA3-U223N TA3-U2M35N TA3-U224N TA3-U2M40N TA3-U227N TA3-U228N TA3-U2M45N TA3-U231N TA3-U2M40N TA3-U232N TA3-U235N TA3-U2M55N


TDS3-U200N Welded Steel Frame Removable Top Protected Screw Cast Iron Bearing Housing Alignable Spring Locking Relubricatable Wide Inner Ring TD3-U200N Takeup Units


Adjustment mm inches G 1¹⁵⁄₁₆ 50

2³⁄₁₆ 55

2⁷⁄₁₆

60

2¹⁵⁄₁₆

75

3⁷⁄₁₆

85

3¹⁵⁄₁₆

100

Takeup number

A

B

C

E

Lip seals

12 18 24 304.8 457.2 609.6

TDS3-U231N-12 TDS3-U231N-18 TDS3-U231N-24 TDS3-U2M50N-12 TDS3-U2M50N-18 TDS3-U2M50N-24

26¹⁄₂ 32¹⁄₂ 38¹⁄₂ 673.1 100.0 825.5 977.9

28¹⁄₂ 34¹⁄₂ 3 40¹⁄₂ 723.9 876.3 76.2 1028.7

12 18 24 304.8 457.2 609.6

TDS3-U235N-12 TDS3-U235N-18 TDS3-U235N-24 TDS3-U2M55N-12 TDS3-U2M55N-18 TDS3-U2M55N-24

27¹⁄₂ 33¹⁄₂ 39¹⁄₂ 698.5 106.4 850.9 1003.3

29¹⁄₂ 35¹⁄₂ 3 41¹⁄₂ 749.3 901.7 76.2 1054.1

12 18 24 30 304.8 457.2 609.6 762.0

TDS3-U239N-12 TDS3-U239N-18 TDS3-U239N-24 TDS3-U239N-30 TDS3-U2M60N-12 TDS3-U2M60N-18 TDS3-U2M60N-24 TDS3-U2M60N-30

28¹⁄₂ 34¹⁄₂ 40¹⁄₂ 46¹⁄₂ 725.9 876.3 111.1 1028.7 1181.1

30¹⁄₂ 36¹⁄₂ 3 42¹⁄₂ 48¹⁄₂ 774.7 927.1 76.2 1079.5 1231.9

12 18 24 30 304.8 457.2 609.6 762.0

TDS-U247N-12 TDS-U247N-18 TDS-U247N-24 TDS-U247N-30 TDS-U2M75N-12 TDS-U2M75N-18 TDS-U2M75N-24 TDS-U2M75N-30

30¹⁄₂ 36¹⁄₂ 42¹⁄₂ 48¹⁄₂ 774.7 927.1 130.2 1079.5 1231.9

32¹⁄₂ 38¹⁄₂ 4 44¹⁄₂ 50¹⁄₂ 825.5 977.9 101.6 1130.3 1282.7

12 18 24 30 304.8 457.2 609.6 762.0


32 38 44 50 812.8 965.2 142.9 1117.6 1270.0

34¹⁄₂ 40¹⁄₄ 4 46¹⁄₄ 52¹⁄₄ 870.0 1022.4 101.6 1174.8 1327.2

12 18 24 30 304.8 457.2 609.6 762.0


36 42 48 54 914.4 1066.8 177.8 1219.2 1371.6

38¹⁄₂ 44¹⁄₂ 5 50¹⁄₂ 56¹⁄₂ 977.9 1130.3 127.0 1282.7 1435.1

3¹⁵⁄₁₆

4³⁄₁₆

4³⁄₈

5¹⁄₈

5⁵⁄₈

7

F Bolts

G

H

K

L

M

U

V

W

⁵⁄₈

...

1³⁄₄

7¹⁄₄

8¹⁄₄

16

...

⁵⁄₈

...

1¹⁷⁄₆₄

⁵⁵⁄₆₄

1¹⁵⁄₁₆

4¹⁄₈

44.4

184.2 209.6 . . .

32.1

21.8

49.2

104.8

...

1³⁄₄

7³⁄₄

...

1¹³⁄₃₂

⁵⁵⁄₆₄

2³⁄₃₂

4¹⁄₈

16

...

44.4

196.8 220.7 . . .

35.7

21.8

53.3

104.8

³⁄₄

...

1³⁄₄

8¹⁄₄

...

1⁹⁄₁₆

³¹⁄₃₂

2⁵⁄₃₂

4¹⁄₈

20

...

44.4

209.6 231.8 . . .

39.7

24.6

54.8

104.8

⁵⁄₈

2

2

9¹⁄₄

1¹³⁄₁₆

1⁵⁄₃₂

2¹³⁄₆₄

5¹⁄₈

16

50.8

50.8

235.0 269.9 117.5 46.0

29.4

56.0

130.2

³⁄₄

2

2

10

1⁷⁄₁₆

2¹⁄₂

5⁵⁄₈

20

50.8

50.8

254.0 300.0 131.8 54.0

36.5

63.5

142.9

³⁄₄

2¹⁄₂

2¹⁄₄

12

2³⁷⁄₆₄

1⁴⁵⁄₆₄

3¹⁄₆₄

6⁷⁄₈

20

63.5

57.2

304.8 373.1 150.8 65.5

43.2

76.6

174.6

8¹¹⁄₁₆

9¹⁄₈

10⁵⁄₈

4⁵⁄₈

11¹³⁄₁₆ 5³⁄₁₆

14¹¹⁄₁₆ 5¹⁵⁄₁₆

2¹⁄₈

Z

Unit wt. (lbs./kg.) 41.0 47.0 52.0

Unit no.

TD3-U231N 18.6 21.3 23.6

45.0 51.0 56.0

TD3-U2M50N

TD3-U235N 20.4 23.1 25.4

52.0 58.0 63.0 68.0

TD3-U2M55N

TD3-U239N 23.6 38.6 42.2 45.8

76.0 85.0 93.0 101.0

TD3-U2M60N

TD3-U247N 34.5 38.6 42.2 45.8

99.0 108.0 116.0 124.0

TD3-U2M75N

TD3-U255N 44.9 49.0 52.6 56.2

173.0 185.0 195.0 205.0

TD3-U2M85N

TD3-U263N 78.5 83.9 88.4 93.0

TD3-U2M100N

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size, ¹⁄₈" PT. Closed end takeups available, suffix "C" (optional). 5 inch channel (DIM E) has hinged top construction. G Takeups with adjustment of 18" (457.2 mm) or more have center ing pad welded to bottom of frame. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-56


TP, TPT, TSP, TSPT T-Frame Takeup Protected Screw Mild Steel or AISI 304 Stainless Steel Pillow Block Mounting or Tapped Base Pillow Block Mounting Pillow Block and Tapped Base Pillow Block Units Not Included

Pillow Block Plate Basic Series No.

Adjustment

B

C

F Bolts

E

G

H

K

Unit wt. lbs.

Adj. Screw

T

Tapped Base Plate

100

3 6 9

3⁹⁄₁₆ 7¹⁄₁₆ 11¹⁄₁₆

6⁷⁄₈ 10³⁄₈ 14³⁄₈

3¹¹⁄₁₆

³⁄₈

2⁵⁄₈

¹⁄₄

1¹⁄₂

⁷⁄₈

³⁄₈

⁵⁄₈-11

3.0 4.0 5.1

Stainless 2.6 3.5 4.4

250

3 6 9 12

4³⁄₈ 7³⁄₈ 10³⁄₈ 13³⁄₈

8¹⁄₂ 11¹⁄₂ 14¹⁄₂ 17¹⁄₂

4

¹⁄₂

3

¹⁄₄

1⁷⁄₈

1¹⁄₈

¹⁄₂

³⁄₄-10

5.8 7.1 8.4 9.9

4.8 5.8 7.0 8.1

300

6 9 12 18

6¹⁄₈ 10¹⁄₈ 14¹⁄₈ 21¹⁄₈

11¹⁄₈ 15¹⁄₈ 19¹⁄₈ 26¹⁄₈

5¹⁄₄

⁵⁄₈

4

¹⁄₄

2³⁄₈

1¹⁄₂

¹⁄₂

⁷⁄₈-9

11.0 13.1 16.0 20.4

11.4 13.4 16.5 21.6

400

12 18 24

27³⁄₄ 33³⁄₄ 39³⁄₄

20 26 32

7¹⁄₂

³⁄₄

5¹⁄₂

¹⁄₄

3¹⁄₂

2¹⁄₈

Pinned Nut

1¹⁄₄-7

42.9 52.1 61.3

... ... ...

Pillow Block Mounting* Basic Series No.

100

250

Shaft dia. ¹⁄₂ Thru 1

1¹⁄₈ Thru 1³⁄₄

THD

Steel

Tapped Base MountingK

T-Frame Steel

Stainless

TP100-3 TP100-6 TP100-9

TSP100-3 TSP100-6 TSP100-9

TP250-3 TP250-6 TP250-9 TP250-12

Sq. Drive

TSP250-3 TSP250-6 TSP250-9 TSP250-12

N

F1 Bolts

³⁄₈

¹⁄₂

L

5¹⁄₄

7

V Min.

Max.

2¹⁵⁄₁₆

4⁵⁄₁₆

3¹³⁄₁₆

5¹¹⁄₁₆

1¹⁄₂

2¹⁄₃₂

T-Frame

Shaft dia.

Stainless

Steel

F1 Bolts

L

N

V

³⁄₄ Thru 1

TPT100-3 TPT100-6 TPT100-9

TSPT100-3 TSPT100-6 TSPT100-9

³⁄₈

3

2

1¹⁄₂

1¹⁄₈ Thru 1¹⁄₄

TPT2501-3 TPT2501-6 TPT2501-9 TPT2501-12

TSPT2501-3 TSPT2501-6 TSPT2501-9 TSPT2501-12

⁷⁄₁₆

4

3

1¹⁄₂

1¹⁄₄ Thru 1⁷⁄₁₆

TPT2502-3 TPT2502-6 TPT2502-9 TPT2502-12


¹⁄₂

4¹⁄₄

3¹⁄₄

2

1¹⁵⁄₁₆

TPT2505-3 TPT2505-6 TPT2505-9 TPT2505-12


⁵⁄₈

5¹⁄₂

4

2

2

300

1¹⁵⁄₁₆ Thru 2⁷⁄₁₆

TP300-6 TP300-9 TP300-12 TP300-18

TSP300-6 TSP300-9 TSP300-12 TSP300-18

⁵⁄₈

10

5⁹⁄₁₆

8¹¹⁄₁₆

2²⁷⁄₃₂

...

...

...

...

...

...

...

400

2¹⁄₂ Thru 3¹⁄₂

TP400-12 TP400-18 TP400-24

––––– ––––– –––––

³⁄₄

14

8¹⁄₂

11³⁄₄

3¹⁄₂

...

...

...

...

...

...

...

See footnotes on facing page.

B-57


TQP T-Frame Takeup Quick Release Protected Screw AISI 304 Stainless Steel Pillow Block Mounting Pillow Block Units Not Included

Adjustment

N

Shaft Dia.

T-Frame No.*

¹⁄₂ Thru 1

TQP100-6 TQP100-9

6 9

10³⁄₈ 14³⁄₈

³⁄₈

3⁷⁄₈ 5⁷⁄₈

1¹⁄₈ Thru 1³⁄₄

TQP250-6 TQP250-9 TQP250-12

6 9 12

11¹⁄₂ 14¹⁄₂ 17¹⁄₂

¹⁄₂

1⁹⁄₁₆ 3¹⁄₁₆ 4⁹⁄₁₆

C

F1

K

Adj. Screw

L

T

U

V

Z

Sq Drive

THD

Unit wt. lbs.

Min.

Max.

5¹⁄₄

2¹⁵⁄₁₆

4⁵⁄₁₆

³⁄₄

3 5

1¹⁄₂

3⁷⁄₁₆

³⁄₈

⁵⁄₈-11

4.0 5.0

7

3¹³⁄₁₆

5¹¹⁄₁₆

1

4 6 8

2¹⁄₃₂

4⁷⁄₈

¹⁄₂

³⁄₄-10

7.0 8.2

9.5

Bold face items are normally available from stock; please consult for availability of non-stock items. * For pillow block dimensions see page B-21. K For tapped base dimensions see page B-30. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-58


NT3-U200N Welded Channel Frame Protected Screw Cast Iron Bearing Housing Alignable Spring Locking Relubricatable Wide Inner Ring


Takeup number

A

B

C

12¹⁄₄

D

E

F Bolts

H

J

¹⁄₂

³⁄₁₆

1¹⁄₂

6

1³⁄₁₆ 1⁷⁄₁₆

30

35 1¹⁵⁄₁₆

L

R

U

W

⁵¹⁄₆₄

1⁹⁄₃₂

Unit wt. (lbs./kg.)

2³⁄₄

10⁷⁄₈

152.4

NT3-U215N-6 NT3-U216N-6 NT3-U2M25N-6

69.8

276.2

311.2

34.53 44.4

12

4.8

38.1

61.9 106.4 50.8

20.2

32.5

6 152.4

NT3-219N-6 NT3-U2M30N-6

3 76.2

10⁷⁄₈ 276.2

12¹⁄₄ 311.2

1⁹⁄₁₆ 1³⁄₄ 39.69 44.4

¹⁄₂ 12

³⁄₁₆ 4.8

1¹⁄₂ 38.1

2⁷⁄₁₆ 4¹¹⁄₁₆ 2 61.9 119.1 50.8

⁶¹⁄₆₄ 24.2

1¹⁵⁄₃₂ 37.3

5.0

9 12 228.6 304.8

NT3-U223N-9 NT3-U223N-12 NT3-U2M35N-9 NT3-U2M35N-12

3¹¹⁄₁₆

14¹⁄₂ 17¹⁄₂ 368.3 444.5

16¹⁄₂ 19¹⁄₂ 419.1 495.3

1⁷⁄₆₄

1⁹⁄₁₆

9.5 10.0

39.7

9 12 18 228.6 304.8 457.2

NT3-U231N-9 NT3-U231N-12 NT3-U231N-18 NT3-U2M50N-9 NT3-U2M50N-12 NT3-U2M50N-18

16 19 25 406.4 118.3 482.6 635.0

18¹⁄₂ 21¹⁄₂ 27¹⁄₂ 469.9 546.1 698.5

93.7 4²¹⁄₃₂

1²³⁄₆₄

1⁴⁹⁄₆₄

1³⁄₄

2¹⁄₄

2⁷⁄₁₆

4³⁄₁₆

¹⁄₄

2

2³⁄₄

44.85 57.2

12

6.4

50.8

69.8 141.3 63.5

28.2

2³⁄₃₂

⁵⁄₈

⁵⁄₁₆

2¹⁄₂

3¹⁄₂

1¹⁷⁄₆₄ 1²⁵⁄₃₂

16

7.9

63.5

88.9 175.4 76.2

3¹⁄₄

53.18 82.6

5⁹⁄₁₆

2

¹⁄₂


B-59

K

in. ¹⁵⁄₁₆ 1

25

50

Adjustment

6²⁹⁄₃₂

2¹⁄₂

3

32.1

45.2

4.5 4.5 2.0 2.3

4.3 4.5 18.0 19.0 21.0 8.2 8.6 9.5

Universal Takeup Frames

LC Bolted Steel Frames 2 or 4-bolt Frame Mounting Bolt Hole Centers Adjustable Pillow Block Units Not Included

Dimensions (inches/mm) Unit Mounting Pillow block series*

Bolt dia. (F') and max. shaft size (A) in.

P3-U216N P3-U2M25N .......... .......... PL3-U216N PL3-U2M25N .......... .......... P3-U231N P3-U2M50N .......... .......... PL3-U231N PL3-U2M50N PH3-U219N PH3-U2M30N

P3-U239N P3-U2M60N PL3-U235N PL3-U2M55N PH3-U235N PH3-U2M55N

Takeup frame number

Adjustment

B

C

D

E

F Bolts

G

H

K

L

R

T Bolts

U

V

W Min.

Max.

mm

³⁄₈

10 bolts

1

25

LC1-6 LC1-9 LC1-12

shaft

¹⁄₂

12 bolts

LC2-6 LC2-9 1¹⁵⁄₁₆ 50 LC2-12 shaft LC2-18 304.8

⁵⁄₈

16 bolts

2³⁄₁₆

60 shaft

LC3-9 LC3-12 LC3-18 LC3-24

15¹⁄₄ 18¹⁄₄ 21¹⁄₄

6 9 12

16 19 22

17 20 23

152.4 228.6 304.8

406.4 482.6 558.8

431.8 508.0 584.2

387.4 436.6 539.8

6 9 12 18

19¹⁄₈ 22¹⁄₈ 25¹⁄₈ 31¹⁄₈

20¹⁄₄ 23¹⁄₄ 26¹⁄₄ 32¹⁄₄

18¹⁄₈ 21¹⁄₈ 24¹⁄₈ 30¹⁄₈

152.4 228.6 638.2 457.2

485.8 562.0 667.8 790.6

514.4 590.6 819.2

460.4 536.6 612.8 765.2

9 12 18 24

25⁵⁄₁₆ 28⁵⁄₁₆ 34⁵⁄₁₆ 40⁵⁄₁₆

26⁹⁄₁₆ 29⁹⁄₁₆ 35⁸⁄₁₆ 41⁹₁₆

24¹⁄₁₆ 27¹⁄₁₆ 33¹⁄₁₆ 39¹⁄₁₆

228.6 304.8 457.2 609.6

642.9 719.1 871.5 1023.9

674.7 750.9 903.3 1055.7

1³⁄₄ 44.5

2³⁄₈ 60.3

3 76.2

2⁵⁄₈ 66.7

3¹⁄₈ 79.4

4 101.6

³⁄₈ 10

¹⁄₂ 12

⁵⁄₈ 16

1⁵⁄₈ ³⁄₁₆ 41.3 4.8

2¹⁄₈ ¹⁄₄ 54.0 6.4

2³⁄₄ ⁵⁄₁₆ 69.8 7.9

5 2¹⁄₈ 127.0 54.0

1³⁄₄ 44.5

6⁹⁄₁₆ 2¹¹⁄₁₆ 2³⁄₁₆ 166.7 68.3 55.6

8⁵⁄₃₂ 3⁵⁄₁₆ 207.2 84.1

2³⁄₄ 69.8

⁵⁄₁₆ 8

³⁄₈ 10

¹⁄₂ 12

611.2 687.4 839.8 992.2

1¹⁄₁₆ 27.0

3 76.2

5¹⁵⁄₁₆ 127.0

1¹¹⁄₃₂ 34.1

3³⁄₄ 95.2

7¹⁄₄ 184.2

1⁵⁄₈ 41.3

4¹⁄₄ 108.0

9 228.6

Bold face items are normally available from stock; please consult for availability of non-stock items. * Nominal maximum size of pillow block to fit frame. Use dimensions A, D, and W as limits for fitting and mounting ball bearing pillow blocks. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-60

Standard Duty Screw Conveyor Hanger Bearing Units

HM3-U200 High-test Iron Housing Alignable Spring Locking Relubricatable Wide Inner Ring

Typical Installation


Hanger unit number

A

1¹⁄₂

HM3-U224E3

2

E ±.015" ±0.38 mm

G

H

Thread K

M

2.500 63.50

1.75 44.4

.734 18.64

.97 24.6

³⁄₄-10 NC —

1.00 25.4

2.083 52.91

5.0

2.00 50.8

2.500 63.50

1.75 44.4

.828 21.03

.91 23.1

³⁄₄-10 NC —

1.00 25.4

2.475 62.86

6.3

.310 7.87

2.50 63.5

3.625 92.08

2.50 63.5

.938 23.83

1.75 44.4

⁷⁄₈-9 NC —

1.06 26.9

3.012 76.50

11.3

7.44 189.0

.375 9.52

2.88 73.02

3.625 92.08

2.50 63.5

1.062 26.99

2.00 50.8

⁷⁄₈-9 NC —

1.06 26.9

3.624 92.05

12.9

9.25 235.0

.344 8.74

3.562 90.49

4.500 114.30

3.56 90.5

1.438 36.51

2.56 65.0

1¹⁄₈-12 NF —

1.88 47.8

4.158 105.61

24.8

C

3.88 98.6

5.19 131.8

.218 5.54

1.91 48.5

HM3-U2E32E3

4.38 111.3

5.44 138.2

.170 4.32

2⁷⁄₁₆

HM3-U239N

5.25 133.4

7.00 177.8

3

HM3-U2E48N

6.12 155.6

3⁷⁄₁₆

HM3-U255N

7.50 190.5

D

Please consult for availability. † Shaft sizes 1¹⁄₂"-2" to fit 1¹⁄₄" square tubing; 2⁷⁄₁₆"-3", 1³⁄₄" square, 3⁷⁄₁₆", 2¹⁄₂" square. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

B-61

Unit wt. (lbs./kg.)

F

B

N

2.3 2.9 5.1 5.9 11.3

Bearing no. UG224E3L BS225555 UG239NL UG2E48NL UG255NL

Standard Duty Screw Conveyor Trough End Units

FF 200 Cast Iron Housing 2 Ball Bearings Spring Locking Relubricatable


Flanged unit number

inches

Lip seals

1¹⁄₂

FF 224N

2 2³⁄₁₆

FF 232N FF 235N

Replacement bearing number K

A

B

D

E

F Bolts

UR224A

4 101.6

4 101.60

3¹³⁄₁₆ 96.84

5¹⁄₈ 130.2

¹⁄₂ 12

UR232A UR235A

4¹⁵⁄₁₆ 125.4

5¹⁄₈ 130.17

4¹⁄₂ 114.30

6³⁄₈ 161.9

5⁵⁄₈ 142.88

5 127.00

G

H

L

¹⁄₄ 6.4

⁹⁄₁₆ 14.3

4¹⁄₁₆ 103.2

⁵⁄₈ 16

⁵⁄₁₆ 7.9

¹¹⁄₁₆ 17.5

6⁷⁄₈ 174.6

⁵⁄₈ 16

⁵⁄₁₆ 7.9

M

N

P

R

... ...

6²⁵⁄₃₂ 172.2

¹⁄₂ 12.7

4⁷⁄₃₂ 107.2

10.0

4¹³⁄₁₆ 122.2

... ...

8¹⁄₂ 215.9

⁵⁄₈ 15.9

5¹⁄₃₂ 127.8

17.4

¹¹⁄₁₆ 17.5

5⁵⁄₁₆ 134.9

... ...

9⁷⁄₃₂ 234.2

¹⁹⁄₃₂ 15.1

5¹⁷⁄₃₂ 140.5

20.8

Unit wt. (lbs./kg.)

4.5 7.9

2⁷⁄₁₆

FF 239N

UR239A

5³⁄₈ 136.5

2³⁄₄ 2¹⁵⁄₁₆ 3

FF 244N FF 247N FF 2E48N

UR244A UR247A UR2E48A

6³⁄₈ 161.9

6 152.40

5³⁄₄ 146.05

7³⁄₄ 196.8

³⁄₄ 20

⁵⁄₁₆ 7.9

³⁄₄ 19.0

6¹⁄₁₆ 154.0

4⁵⁄₈ 117.5

10¹⁄₄ 260.4

¹¹⁄₁₆ 17.5

6⁹⁄₃₂ 159.5

31.1

3⁷⁄₁₆

FF 255N

UR255A

7 177.8

6³⁄₄ 171.45

7¹⁄₈ 180.98

8⁹⁄₁₆ 217.5

³⁄₄ 20

¹⁄₂ 12.7

1 25.4

7⁵⁄₈ 193.7

5³⁄₁₆ 131.8

11³⁄₈ 288.9

³⁄₄ 19.0

7²³⁄₃₂ 196.0

50.2

9.4

14.1

22.8

Bold face items are normally available from stock; please consult for availability of non-stock items. * thrust load (preferably in shear) with heavy duty snap ring and square face washer. See below. Lubrication fitting tap size: for 2⁷⁄₁₆" and smaller shafts, ¹⁄₄" PT; for all other shafts, ³⁄₈" PT. K Includes two bearings, with seals, and inner ring set screws or collar with set screws. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-75.

Shaft Washer and Retaining Data. Not Furnished by Link-Belt Bearing Division. Shaft Size (inches)

Heavy Series Retaining Ring Eaton Number

1¹⁄₂ 2 and 2³⁄₁₆ 2⁷⁄₁₆ 2³⁄₄ to 3 3⁷⁄₁₆

344-1 1071 1227 5224 5531

Sharp Cornered Thrust Washer Bore (in.)

O.D. (in.)

Width (in.)

(¹⁄₆₄ over the shaft diameter)

2 2¹⁄₂ 3 3¹⁄₂ 4¹⁄₁₆

.0625 .125 .125 .125 .140

B-62

Spring Locking Ball Bearings

U200NL, UB200NL Spherical or Cylindrical O.D. Sealed Spring Locking Non-relubricatable Wide Inner Ring

U200NL

UB200NL

Dimensions (inches/mm) Shaft diameter mm inches ¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆ 17

J Bore tolerance

B k

D

G

N

r X

S

+.0006 –.0000

1.5748

1³⁄₃₂

.4531

.4724

.5118

.941

.024

.15

+0.015␣ –0.000

40.000

27.78

11.509

12.000

13.000

23.90

0.61

3.8

+.0007 –.0000 +0.018 –0.000

1.8504 47.000

1⁹⁄₃₂ 32.54

.5313 13.494

.5512 14.000

.5906 15.000

1.121 28.47

.039 1.00

.19 4.8

+.0007 –.0000

2.0472

1²³⁄₆₄

.5625

.5906

.5906

1.313

.039

.22

+0.018 –0.000

52.000

34.53

14.288

15.000

15.000

33.35

1.00

5.6

+.0007 –.0000

2.4409

1⁹⁄₁₆

.6094

.6299

.7087

1.587

.039

.22

+0.018␣ –0.000

62.000

39.69

15.478

16.000

18.000

40.31

1.00

5.6

Cyl. O.D.

Spher. O.D.

U212NL U2M20NL

UB212NL UB2M20NL

⁷⁄₈ ¹⁵⁄₁₆ 1

U214NLg U215NLg U216NLg U2M25NL

UB214NLg UB215NLg UB216NLg UB2M25NL

U218NL U219NL U2E20NL U2M30NL

UB218NL UB219NL UB2E20NL UB2M30NL



+.0008 –.0000

2.8346

1⁴⁹⁄₆₄

.6563

.6693

.7480

1.847

.039

.25

+0.020␣ –0.000

72.000

44.85

16.669

17.000

19.000

46.91

1.00

6.4

1¹⁄₂

U224NLg U2M40NL

UB224NLg UB2M40NL

+.0008 – .0000 +0.020␣ –0.000

3.1496 80.000

1²⁹⁄₃₂ 48.42

.7344 18.653

.7087 18.000

.8661 22.000

2.083 52.91

.039 1.00

.32 8.1

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄



+.0008 –.0000

3.3465

2¹⁄₃₂

.7969

.7480

.8661

2.281

.039

.32

+0.020␣ –0.000

85.000

51.59

20.241

19.000

22.000

57.94

1.00

8.1

U231NLg U2E32NLg U2M50NL

UB231NLg UB2E32NLg UB2M50NL

+.0008 –.0000

3.5433

2³⁄₃₂

.8261

.7874

.8661

2.475

.039

.38

+0.020␣ –0.000

90.000

53.18

21.034

20.000

22.000

62.86

1.00

9.6

U232NLg U235NLg U2M55NL

UB232NLg UB235NLg UB2M55NL

+.0009 –.0000

3.9370

2¹⁄₄

.8438

.8268

.9843

2.749

.059

.38

+0.023␣ –0.000

100.000

57.15

21.431

21.000

25.000

69.82

1.50

9.6

U236NL U238NL U239NL U2M60NL

UB236NL UB238NL UB239NL UB2M60NL

+.0009 –.0000

4.3307

2¹⁄₂

.9375

.8661

1.0630

3.012

.059

.38

+0.023␣ –0.000

110.000

63.50

23.813

22.000

27.000

76.50

1.50

9.6

25 1¹⁄₈ 1³⁄₁₆ 1¹⁄₄ 30 1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆ 35 40

45 1¹⁵⁄₁₆ 2 50 2 2³⁄₁₆ 55 2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆

T Tap Size

10–32

³⁄₄ 20

60

Bearing number with set screwsK Spherical Cylindrical O.D. O.D. U2B08NL UB2B08NL U210NL UB210NL U211NL UB211NL U2M17NL UB2M17NL

¹⁄₄–28

¹⁄₄–28

¹⁄₄–28

⁵⁄₁₆–24 ⁵⁄₁₆–24

⁵⁄₁₆–24

³⁄₈–24

³⁄₈–24

³⁄₈–24

Please consult for availability. X Max fillet radius of housing to clear bearing corner. k Bearing O.D. tolerance; for 1¹⁄₂" and smaller shaft, +.0000"–.0005" (+0.000 mm –0.013 mm); 1⁵⁄₈ thru 2¹¹⁄₁₆ shafts, +.0000" –.0006" (+0.000 mm –0.015 mm); 2¹⁄₂" thru 3¹⁄₂" shafts +.0000" –.0008" (+0.000 mm –0.020 mm); all other sizes, +.0000" –.0010" (+0.000 mm –0.025 mm). K N lip seals standard. H labyrinth seals available. g Available with E3 triple lip seals. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-77.

B-63


UG200NL, UBG200NL Spherical or Cylindrical O.D. Sealed Spring Locking Relubricatable Wide Inner Ring

UG200NL

UBG200NL


inches ¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

17 ³⁄₄

UG212NL UG2M20NL

UBG212NL UBG2M20NL

⁷⁄₈ ¹⁵⁄₁₆ 1

UG214NLg UG215NLg UG216NLg UG2M25NL

UBG214NLg UBG215NLg UBG216NLg UBG2M25NL

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄


UBG218NL UBG219NL UBG2E20NL UBG2M30NL

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

UG220NLg UG222NLg UG223NLg U2M35NL


1¹⁄₂

UG224NLg UG2M40NLg

UBG224NLg UBG2M40NLg

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

UG226NLg UG227NLg UG228NLg UG2M45NL


1¹⁵⁄₁₆ 2

UG231NLg UG2E32NLg UG2M50NL

UBG231NLg UBG2E32NLg UBG2M50NL

UG232NLg UG235NLg UG2M55NL

UBG232NLg UBG235NLg UBG2M55NL

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆


UBG236NL UBG238NL UBG239NL UBG2M60NL

2¹⁄₂ 2¹¹⁄₁₆


... ... ...

2³⁄₄ 2¹⁵⁄₁₆ 3


... ... ... ...

3⁷⁄₁₆ 3¹⁄₂


... ... ...


... ... ...

20

25

30

35 40

45

50 2 2³⁄₁₆ 55

60

65

75

85 3¹⁵⁄₁₆ 4 100

Bearing number with set screwsK Spherical Cylindrical O.D. O.D. UG2B08NL UBG2B08NL UG210NL UBG210NL UG211NL UBG211NL UG2M17NL UBG2M17NL

J Bore tolerance

+.0006 –.0000

B k

1.5748

D

Cyl. O.D. 1³⁄₃₂

Spher. O.D.

M Collar O.D.

.5118

...

G

.4531

.4724

N

r X

S

.941

.024

.15

T Tap Size

Y

.129 10–32

+0.015␣ –0.000

40.000

27.78

11.509 12.000

13.000 . . .

23.90 0.61

3.8

+.0007 –.0000 +0.018 –0.000

1.8504 47.000

1⁹⁄₃₂ .5313 .5512 32.54 13.494 14.000

.5906 ... 15.000 . . .

1.121 .039 28.47 1.00

.19 4.8

+.0007 –.0000

2.0472

1²³⁄₆₄

.5906

1.313

.039

.22

+0.018 –0.000

52.000

34.53 14.288 15.000

15.000 . . .

33.35 1.00

5.6

+.0007 –.0000

2.4409

1⁹⁄₁₆

.7087

1.587

.039

.22

+0.018␣ –0.000

62.000

39.69 15.478 18.000

18.000 . . .

40.31 1.00

5.6

+.0008 –.0000

2.8346

1⁴⁹⁄₆₄

.7480

1.847

.039

.25

+0.020␣ –0.000

.5625

.6094

.6563

.5906

.7087

.7480

...

...

...

72.000

44.85 16.669 19.000

19.000 . . .

46.91 1.00

6.4

+.0008 – .0000 3.1496 +0.020␣ –0.000 80.000

1²⁹⁄₃₂ .7344 .8268 48.42 18.653 21.000

.8661 ... 22.000 . . .

2.083 .039 52.91 1.00

.32 8.1

+.0008 –.0000

3.3465

2¹⁄₃₂

.8661

...

2.281

.039

.32

+0.020␣ –0.000

85.000

51.59 20.241 22.000

22.000 . . .

57.94

1.00

8.1

.8661

2.475

.7969

.8661

+.0008 –.0000

3.5433

2³⁄₃₂

.039

.38

+0.020␣ –0.000

90.000

53.18 21.034 23.000

22.000 . . .

62.86 1.00

9.6

.9843

2.749

.8281

.9055

...

+.0009 –.0000

3.9370

2¹⁄₄

.8438

.059

.38

+0.023␣ –0.000

100.000

57.15

21.431 25.000

25.000 . . .

69.82 1.50

9.6

+.0009 –.0000

4.3307

2¹⁄₂

.9375

1.0630

1.0630

...

3.012

.059

.38

+0.023␣ –0.000

110.000

63.50 23.813 27.000

27.000

...

76.50 1.50

9.6

.9843

...

3.28 ¹⁄₄–28

¹⁄₄–28

.137 3.48 .140 3.56

¹⁄₄–28

.202 5.13

⁵⁄₁₆–24

.239 6.07

⁵⁄₁₆–24

⁵⁄₁₆–24

.253 6.43 .254 6.45

³⁄₈–24

.268 6.81

³⁄₈–24

.295 7.49

³⁄₈–24

.330 8.38

+.0009 –.0000

4.7244

2¹¹⁄₁₆

...

1.0630

4³⁄₁₆

3.331

...

...

...

.343

+0.023␣ –0.000

120.000

68.26 25.400 . . .

27.000

106.4

84.61 . . .

...

...

8.71

+.0009 –.0000

5.1181

2⁷⁄₈

1.0625

1.1417

4⁵⁄₈

3.624

...

...

...

.367

+0.023␣ –0.000

130.000

73.02

26.987 . . .

92.05 . . .

...

...

1.0000

...

29.000 117.5

+.0011 –.0000

5.9055

3⁹⁄₁₆

+0.028␣ –0.000

150.000

90.49 36.513 . . .

34.000 131.8

+.0011 –.0000

7.0866

4¹⁄₄

1.5748

+0.028␣ –0.000

180.000

107.95 42.466 . . .

1.4375

1.6719

...

...

1.3386

5³⁄₁₆

5¹⁵⁄₁₆

40.000 150.8

...

...

...

105.61 . . .

4.158

...

...

4.913

...

...

...

124.79 . . .

...

...

9.32 .415 10.54 .504 12.80

See footnotes on facing page.

B-64

Collar Mounted Ball Bearings

Y200NL, YB200NL Spherical or Cylindrical O.D. Sealed Eccentric Cam Locking Collar Non-relubricatable Wide Inner Ring

Y200NL

YB200NL


Bearing number with collar Cylindrical Spherical O.D. O.D.

J Collar number

Bore tolerance

B k

D

G

H

Cyl. O.D.

Spher. O.D.

M

N

r X

T

¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

Y2B08NL Y210NL Y211NL

YB2B08NL YB210NL YB211NL

W2B08-5S W210-5S W211-5S

+.0006 –.0000 +0.015–0.000

1.5748 40.000

1¹⁵⁄₃₂ 37.31

.5469 13.891

1.0938 27.781

.4724 .5118 12.000 13.000

1¹⁄₈ 28.6

.941 23.90

.024 0.61

¹⁷⁄₃₂ 13.5

³⁄₄

Y212NL

YB212NL

W212-5S

+.0007 –.0000 +0.018␣ –0.000

1.8504 47.000

1²³⁄₃₂ 43.66

.6719 17.066

1.3438 34.131

.5512 .5906 14.000 15.000

1⁵⁄₁₆ 33.3

1.121 28.47

.039 1.00

¹⁸⁄₃₂ 13.5

⁷⁄₈ ¹⁵⁄₁₆ 1

Y214NLg Y215NLg Y216NLg

YB214NLg YB215NLg YB216NLg

W214-5S W215-5S W216-5S

+.0007 –.0000 +0.018␣ –0.000

2.0472 52.000

1³⁄₄ 44.45

.6875 17.462

1.3750 34.925

.5906 .5906 15.000 15.000

1¹⁄₂ 38.1

1.313 33.35

.039 1.00

¹⁷⁄₃₂ 13.5

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

Y218NL Y219NL Y2E20NL

YB218NL YB219NL YB2E20NL

W218-5S W219-5S W2E20-5S

+.0007 –.0000 +0.018␣ –0.000

2.4409 62.000

1²⁹⁄₃₂ 48.42

.7188 18.256

1.4375 36.513

.6299 .7087 16.000 18.000

1³⁄₄ 44.4

1.587 40.31

.039 1.00

⁵⁄₈ 15.9

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆



W220-5S W222-5S W223-5S

+.0008 –.0000 +0.020␣ –0.000

2.8346 72.000

2¹⁄₆₄ 51.20

.7422 18.852

1.4844 37.703

.6693 17.000

.7480 19.000

2³⁄₁₆ 55.6

1.847 46.91

.039 1.00

¹¹⁄₁₆ 17.5

1¹⁄₂

Y224NLg

YB224NLg

W224-5S

+.0008 –.0000 +0.020␣ –0.000

3.1496 80.000

2⁷⁄₃₂ 56.36

.8438 21.431

1.6875 42.863

.7087 .8661 18.000 22.000

2³⁄₈ 60.3

2.083 52.91

.039 1.00

²³⁄₃₂ 18.2

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄



W226-5S W227-5S W228-5S

+.0008 –.0000 +0.020␣ –0.000

3.3465 85.000

2⁷⁄₃₂ 56.36

.8438 21.431

1.6875 42.863

.7480 .8661 19.000 22.000

2¹⁄₂ 63.5

2.281 57.94

.039 1.00

²³⁄₃₂ 18.2

1¹⁵⁄₁₆ 2

Y231NLg Y2E32NLg

YB231NLg YB2E32NLg

W231-5S W2E32-5S

+.0008 –.0000 +0.020␣ –0.000

3.5433 90.000

2¹⁵⁄₃₂ 62.71

.9688 24.606

1.9375 49.213

.7874 .8661 20.000 22.000

2³⁄₄ 69.8

2.475 62.86

.039 1.00

²³⁄₃₂ 18.2

2 2³⁄₁₆

Y232NLg Y235NLg

YB232NLg YB235NLg

W232-5S W235-5S

+.0009 –.0000 +0.023␣ –0.000

3.9370 100.000

2¹³⁄₁₆ 71.44

1.0938 27.781

2.1875 55.563

.8268 .9843 21.000 25.000

3 76.2

2.749 69.82

.059 1.50

¹³⁄₁₆ 20.6

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆

Y236NL Y238NL Y239NL

YB236NL YB238NL YB239NL

W236-5S W238-5S W239-5S

+.0009 –.0000 +0.023␣ –0.000

4.3307 110.000

3¹⁄₁₆ 77.79

1.2188 30.956

2.4375 61.913

.8661 1.0630 22.000 27.000

3¹⁄₄ 82.6

3.012 76.50

.059 1.50

⁷⁄₈ 22.2

Please consult for availability. X Max fillet radius of housing to clear bearing corner. g Available with E3 triple lip seals. k Bearing O.D. tolerance; for 1¹⁄₂" and smaller shaft, +.0000" –.0005" (+0.000 mm –0.013 mm); all others +.0000" –.0006" (+0.000 mm –0.015 mm). Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-77.

B-65

Collar Mounted Ball Bearing

YG200NL, YBG200NL Spherical or Cylindrical O.D. Sealed Eccentric Cam Locking Collar Relubricatable Wide Inner Ring

YG200NL

YBG200NL

Dimensions (inches/mm) Shaft diameter inches

Bearing number with collar K Spherical Cylindrical O.D. O.D.

J Collar number

Bore tolerance

B k

D

G

H

Cyl. O.D.

Spher. O.D.

M

N

r X

Y

¹⁄₂ ⁵⁄₈ ¹¹⁄₁₆

YG2B08NL YG210NL YG211NL

YBG2B08NL YBG210NL YBG211NL

W2B08-5S W210-5S W211-5S

+.0006 –.0000 +0.015␣ –0.000

1.5748 40.000

1¹⁵⁄₃₂ 37.31

.5469 13.891

1.0938 27.781

.4724 12.000

.5118 13.000

1¹⁄₈ 28.6

.941 23.90

.024 0.61

.129 3.28

³⁄₄

YG212NL

YBG212NL

W212-5S

+.0007 –.0000 +0.018␣ –0.000

1.8504 47.000

1²³⁄₃₂ 43.66

.6719 17.066

1.3438 34.131

.5512 14.000

.5906 15.000

1⁵⁄₁₆ 33.3

1.121 28.47

.039 1.00

.137 3.48

⁷⁄₈ ¹⁵⁄₁₆ 1

YG214NLg YG215NLg YG216NLg

YBG214NLg YBG215NLg YBG216NLg

W214-5S W215-5S W216-5S

+.0007 –.0000 +0.018␣ –0.000

2.0472 52.000

1³⁄₄ 44.45

.6875 17.462

1.3750 34.925

.5906 15.000

.5906 15.000

1¹⁄₂ 38.1

1.313 33.35

.039 1.00

.140 3.56

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄


YBG218NL YBG219NL YBG2E20NL

W218-5S W219-5S W2E20-5S

+.0007 –.0000 +0.018␣ –0.000

2.4409 62.000

1²⁹⁄₃₂ 48.42

.7188 18.256

1.4375 36.513

.7087 18.000

.7087 18.000

1³⁄₄ 44.5

1.587 40.31

.039 1.00

.202 5.13

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆



W220-5S W222-5S W223-5S

+.0008 –.0000 +0.020␣ –0.000

2.8346 72.000

2¹⁄₆₄ 51.20

.7422 18.852

1.4844 37.703

.7480 19.000

.7480 19.000

2³⁄₁₆ 55.6

1.847 46.91

.039 1.00

.239 6.07

1¹⁄₂

YG224NLg

YBG224NLg

W224-5S

+.0008 –.0000 +0.020␣ –0.000

3.1496 80.000

2⁷⁄₃₂ 56.36

.8438 21.431

1.6875 42.863

.8268 21.000

.8661 22.000

2³⁄₈ 60.3

2.083 52.91

.039 1.00

.253 6.43

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄



W226-5S W227-5S W228-5S

+.0008 –.0000 +0.020␣ –0.000

3.3465 85.000

2⁷⁄₃₂ 56.36

.8438 21.431

1.6875 42.863

.8661 22.000

.8661 22.000

2¹⁄₂ 63.5

2.281 57.94

.039 1.00

.254 6.45

1¹⁵⁄₁₆ 2

YG231NLg YG2E32NLg

YBG231NLg YBG2E32NLg

W231-5S W2E32-5S

+.0008 –.0000 +0.020␣ –0.000

3.5433 90.000

2¹⁵⁄₃₂ 62.71

.9688 24.606

1.9375 49.213

.9055 23.000

.8661 22.000

2³⁄₄ 69.8

2.475 62.86

.039 1.00

.268 6.81

2 2³⁄₁₆

YG232NLg YG235NLg

YBG232NLg YBG235NLg

W232-5S W235-5S

+.0009 –.0000 +0.023␣ –0.000

3.9370 100.000

2¹³⁄₁₆ 71.44

1.0938 27.781

2.1875 55.563

.9843 25.000

.9843 25.000

3 76.2

2.749 69.82

.059 1.50

.295 7.49

2¹⁄₄ 2³⁄₈ 2⁷⁄₁₆


YBG236NL YBG238NL YBG239NL

W236-5S W238-5S W239-5S

+.0009 –.0000 +0.023␣ –0.000

4.3307 110.000

3¹⁄₁₆ 77.79

1.2188 30.956

2.4375 61.913

1.0630 27.000

1.0630 27.000

3¹⁄₄ 82.6

3.012 76.50

.059 1.50

.330 8.38

Bold face items are normally available from stock; please consult for availability of non-stock items. K N lip seals standard. H labyrinth seals available. k Bearing O.D. tolerance; for 1¹⁄₂" and smaller shaft, +.0000" –.0005" (+0.000 mm –0.013 mm); all others +.0000" –.0006" (+0.000 mm –0.015 mm). X Max fillet radius of housing to clear bearing corner. g Available with E3 triple lip seals. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-77.

B-66

Collar Mounted Ball Bearings

W200EL, WB200EL Spherical or Cylindrical O.D. Sealed Eccentric Cam Locking Collar Non-relubricatable Extended Inner Ring

W200UL

WB200UL


Bearing number with collar Spherical Cylindrical O.D. O.D.

Collar number

Bore tolerance

B k

D

G

H

J

M

N

r X

T

¹⁄₂ ⁵⁄₈

W2B08EL W210EL

WB2B08EL WB210EL

W2B08-5S W210-5S

+.0006 –.0000 +0.015␣ –0.000

1.5748 40.000

1¹⁄₈ 28.57

.2559 6.500

.7500 19.050

.5118 13.000

1¹⁄₈ 28.6

.879 22.33

.024 0.61

¹⁷⁄₃₂ 13.5

³⁄₄

W212EL

WB212EL

W212-5S

+.0007 –.0000 +0.018␣ –0.000

1.8504 47.000

1⁷⁄₃₂ 30.96

.2953 7.500

.8437 21.430

.5906 15.000

1⁵⁄₁₆ 33.3

1.013 25.73

.039 1.00

¹⁷⁄₃₂ 13.5

⁷⁄₈ ¹⁵⁄₁₆ 1

W214EL W215EL W216EL

WB214EL WB215EL WB216EL

W214-5S W215-5S W216-5S

+.0007 –.0000 +0.018␣ –0.000

2.0472 52.000

1⁷⁄₃₂ 30.96

.2953 7.500

.8437 21.430

.5906 15.000

1¹⁄₂ 38.1

1.210 30.73

.039 1.00

¹⁷⁄₃₂ 13.5

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

W218EL W219EL W2E20EL

WB218EL WB219EL WB2E20EL

W218-5S W219-5S W2E20-5S

+.0007 –.0000 +0.018␣ –0.000

2.4409 62.000

1¹³⁄₃₂ 35.71

.3543 9.000

.9375 23.812

.7087 18.000

1³⁄₄ 44.4

1.587 40.31

.039 1.00

⁵⁄₈ 15.9

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆



W220-5S W222-5S W223-5S

+.0008 –.0000 +0.020␣ –0.000

2.8346 72.000

1¹⁷⁄₃₂ 38.89

.3740 9.500

1.0000 25.400

.7480 19.000

2³⁄₁₆ 55.6

1.847 46.91

.039 1.00

¹¹⁄₁₆ 17.5

1¹⁄₂

W224EL

WB224EL

W224-5S

+.0008 –.0000 +0.020␣ –0.000

3.1496 80.000

1²³⁄₃₂ 43.66

.4330 11.000

1.1875 30.162

.8661 22.000

2³⁄₈ 60.3

2.083 52.91

.039 1.00

²³⁄₃₂ 18.2

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄



W226-5S W227-5S W228-5S

+.0008 –.0000 +0.020␣ –0.000

3.3465 85.000

1²³⁄₃₂ 43.66

.4330 11.000

1.1875 30.162

.8661 22.000

2¹⁄₂ 63.5

2.109 53.57

.039 1.00

²³⁄₃₂ 18.2

1¹⁵⁄₁₆ 2

W231EL W2E32EL

WB231EL WB2E32EL

W231-5S W2E32-5S

+.0008 –.0000 +0.020␣ –0.000

3.5433 90.000

1²³⁄₃₂ 43.66

.4330 11.000

1.1875 30.162

.8661 22.000

2³⁄₄ 69.8

2.306 58.57

.039 1.00

²³⁄₃₂ 18.2

Bold face items are normally available from stock; please consult for availability of non-stock items. X Max fillet radius of housing to clear bearing corners. k Bearing O.D. tolerance; for 1¹⁄₂" and smaller shaft, +.0000" –.0005" (+0.000 mm –0.013 mm); all others +.0000" –.0006" (+0.000 mm –0.015 mm). Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-77.

B-67

Collar Mounted Ball Bearing

WG200EL, WBG200EL Spherical or Cylindrical O.D. Sealed Eccentric Cam Locking Collar Relubricatable Extended Inner Ring

WG200UL

WBG200UL


Bearing number with collar Spherical Cylindrical O.D. O.D.

Collar number

Bore tolerance

B k

D

G

H

J

M

N

r X

T

Y

¹⁄₂ ⁵⁄₈

WG2B08EL WG210EL

WBG2B08EL WBG210EL

W2B08-5S W210-5S

+.0006 –.0000 +0.015␣ –0.000

1.5748 40.000

1¹⁄₈ 28.57

.2559 6.500

.7500 19.050

.5118 13.000

1¹⁄₈ 28.6

.879 22.33

.024 0.61

¹⁷⁄₃₂ 13.5

.129 3.28

³⁄₄

WG212EL

WBG212EL

W212-5S

+.0007 –.0000 +0.018␣ –0.000

1.8504 47.000

1⁷⁄₃₂ 30.96

.2953 7.500

.8437 21.430

.5906 15.000

1⁵⁄₁₆ 33.3

1.013 25.73

.039 1.00

¹⁷⁄₃₂ 13.5

.137 3.48

⁷⁄₈ ¹⁵⁄₁₆ 1


WBG214EL WBG215EL WBG216EL

W214-5S W215-5S W216-5S

+.0007 –.0000 +0.018␣ –0.000

2.0472 52.000

1⁷⁄₃₂ 30.96

.2953 7.500

.8437 21.430

.5906 15.000

1¹⁄₂ 38.1

1.210 30.73

.039 1.00

¹⁷⁄₃₂ 13.5

.140 3.56

1¹⁄₈ 1⁴⁄₁₆ 1¹⁄₄


WBG218EL WBG219EL WBG2E20EL

W218-5S W219-5S W2E20-5S

+.0007 –.0000 +0.018␣ –0.000

2.4409 62.000

1¹³⁄₃₂ 35.71

.3543 9.000

.9375 23.812

.7087 18.000

1³⁄₄ 44.4

1.587 40.31

.039 1.00

⁵⁄₈ 15.9

.202 5.13

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆



W220-5S W222-5S W223-5S

+.0008 –.0000 +0.020␣ –0.000

2.8346 72.000

1¹⁷⁄₃₂ 38.89

.3740 9.500

1.0000 25.400

.7480 19.000

2³⁄₁₆ 55.6

1.847 46.91

.039 1.00

¹¹⁄₁₆ 17.5

.239 6.07

1¹⁄₂

WG224EL

WBG224EL

W224-5S

+.0008 –.0000 +0.020␣ –0.000

3.1496 80.000

1²³⁄₃₂ 43.66

.4330 1.1875 11.000 30.162

.8661 22.000

2³⁄₈ 60.3

2.083 52.91

.039 1.00

²³⁄₃₂ 18.2

.253 6.43

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄



W226-5S W227-5S W228-5S

+.0008 –.0000 +0.020␣ –0.000

3.3465 85.000

1²³⁄₃₂ 43.66

.4330 1.1875 11.000 30.162

.8661 22.000

2¹⁄₂ 63.5

2.109 53.57

.039 1.00

²³⁄₃₂ 18.2

.254 6.45

1¹⁵⁄₁₆ 2

WG231EL WG2E32EL

WBG231EL WBG2E32EL

W231-5S W2E32-5S

+.0008 –.0000 +0.020␣ –0.000

3.5433 90.000

1²³⁄₃₂ 43.66

.4330 1.1875 11.000 30.162

.8661 22.000

2³⁄₄ 69.8

2.306 58.57

.039 1.00

²³⁄₃₂ 18.2

.268 6.81

Bold face items are normally available from stock; please consult for availability of non-stock items. X Max fillet radius of housing to clear bearing corners. k Bearing O.D. tolerance; for 1¹⁄₂" and smaller shaft, +.0000" –.0005" (+0.000 mm –0.013 mm); all others +.0000" –.0006" (+0.000 mm –0.015 mm). Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-77.

B-68


SG200EL Spherical O.D. Sealed Spring Locking Relubricatable Extended Inner Ring

SG200EL


Bearing number with set screws

Bore tolerance

B k

D

³⁄₄

SG212EL

+.0007 –.0000 — —

1.8504 47.000

1¹⁄₈ 28.58

⁷⁄₈ ¹⁵⁄₁₆ 1


+.0007 –.0000 — —

2.0472 52.000

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄


+.0007 –.0000 — —

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆


1¹⁄₂

G

J

N

S

T Tap Size

Y

.3750 9.525

.5906 15.000

1.116 28.35

.24 6.1

10-32 —

.137 3.48

1³⁄₁₆ 30.17

.3750 9.525

.5906 15.000

1.313 33.35

.24 6.1

10-32 —

.140 3.56

2.4409 62.000

1¹¹⁄₃₂ 34.13

.3910 9.931

.7087 18.000

1.587 40.31

.32 8.1

¹⁄₄-28 —

.202 5.13

+.0008 –.0000 — —

2.8346 72.000

1⁹⁄₁₆ 39.67

.4530 11.506

.7480 19.000

1.847 46.91

.34 8.6

¹⁄₄-28 —

.239 6.07

SG224EL

+.0008 –.0000 — —

3.1496 80.000

1¹¹⁄₁₆ 42.87

.4840 12.294

.8861 22.000

2.084 52.93

.34 8.6

⁵⁄₁₆-24 —

.253 6.43

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄


+.0008 –.0000 — —

3.3465 85.000

1⁴⁹⁄₆₄ 44.85

.5310 13.487

.8661 22.000

2.281 57.94

.36 9.1

⁵⁄₁₆-24 —

.254 6.45

1¹⁵⁄₁₆

SG231EL

+.0008 –.0000 — —

3.5433 90.000

1⁵¹⁄₆₄ 45.64

.5310 13.487

.8661 22.000

2.478 62.94

.38 9.6

⁵⁄₁₆-24 —

.268 6.81

Bold face items are normally available from stock; please consult for availability of non-stock items. k Bearing O.D. tolerance; for 1¹⁄₂" and smaller shaft, +.0000" –.0005" (+0.000 mm –0.013 mm); all others +.0000" –.0006" (+0.000 mm –0.015 mm). X Max fillet radius of housing to clear bearing corner. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-77.

B-69

Hex Bore Ball Bearings Alignable Spherical O.D. Lip Seals Non-relubricatable

Dimensions (inches/mm) Hex shaft size, inches

Bearing number

Industry number

¹¹⁄₁₆

11K204N

(204KRRB2)

⁷⁄₈

14K205N

(205KRRB2)

1

16K206N

(206KRRB6)

1¹⁄₈

18K207N

(207KRRB9)

1¹⁄₄

20K5-208E3g

(W208PPB16)

1¹⁄₂

24K209N

(209KRRB2)

1⁵⁄₈

26K3-210E3g

(W210PPB7)

A Across flats .695 17.65 .876 22.25 1.001 25.43 1.126 28.60 1.251 31.78 1.501 38.13 1.626 41.30

B Tolerance

Outside diameter

+.000 +.005 +0.00 +0.13

1.8504 47.000 2.0472 52.000 2.4409 62.000 2.8346 72.000 3.1496 80.000 3.3465 85.000 3.5433 90.000

C Tolerance

+.0000 –.0005 +0.000 –0.013

+.0000 –.0006 +0.000 –0.015

G

H Inner ring width

J Outer ring width

N

.412 10.48 .500 12.70 .472 12.00 .742 18.85 .718 18.26 .591 15.00 .594 15.08

.8250 20.955 1.0000 25.400 .9449 24.000 1.4844 37.704 1.4375 36.512 1.1811 30.000 1.1875 30.162

.5906 15.000 .5906 15.000 .7087 18.000 .7480 19.000 .7087 18.000 .8661 22.000 1.1875 30.162

1.121 28.47 1.313 33.35 1.587 40.31 1.847 46.91 2.083 52.91 2.281 57.94 2.475 62.86

Across corners

G

H Inner ring width

J Outer ring width

N

.728 18.49 .797 20.24 1.010 25.65 1.153 29.29 1.299 32.99 1.732 43.99 1.876 47.65

.412 10.48 .412 10.48 .500 12.70 .472 12.00 .742 18.85 .591 15.00 .594 15.08

.8250 20.955 .8250 20.955 1.0000 25.400 .9449 24.000 1.4844 37.704 1.1811 30.000 1.1875 30.162

.5512 14.000 .5512 14.000 .5906 15.000 .6299 16.000 .6693 17.000 .7480 19.000 1.1875 30.162

1.121 28.47 1.121 28.47 1.313 33.35 1.587 40.31 1.847 46.91 2.281 57.94 2.475 62.86

Across corners .797 20.24 1.010 25.65 1.153 29.29 1.299 32.99 1.450 36.83 1.732 43.99 1.876 47.65

Please consult for availability. g Type E3 triple lip seals are standard. On bearings 205, 207, and 209, type E3 seals are optional.

Hex Bore Ball Bearings Cylindrical O.D. Lip Seals Non-relubricatable

Dimensions (inches/mm) Hex shaft size, inches

Bearing number

⁵⁄₈

10KB204N

(204KRR4)

¹¹⁄₁₆

11KB204N

(204KRR2)

⁷⁄₈

14KB205N

(205KRR2)

1

16KB206N

(206KRR6)

1¹⁄₈

18KB207N

(207KRR9)

1¹⁄₂

24KB209N

(209KRR2)

1⁵⁄₈

26KB3-210E3g

(W210PP7)

A Industry number

Across flats

.626 15.90 .695 17.65 .876 22.25 1.001 25.43 1.126 28.60 1.501 31.78 1.626 41.30

B Tolerance

Outside diameter

+.000 +.005 +0.00 +0.13

1.8504 47.000 1.8504 47.000 2.0472 52.000 2.4409 62.000 2.8346 72.000 3.3465 85.000 3.5433 90.000

C Tolerance

+.0000 –.0005 +0.000 –0.013

+.0000 –.0006 +0.000 –0.015

Please consult for availability. g Type E3 triple lip seals are standard. On bearings 205, 207, and 209, type E3 seals are optional. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-77.

B-70

Round Bore Ball Bearings Alignable Spherical O.D. Triple Lip Seals Non-relubricatable

Style 1

Style 2

Style 3

Dimensions (inches/mm) Shaft diameter mm inches

A Bearing number

Industry number

Style

Bearing bore

.890 22.61 1.1880 30.175 1.1880 30.175 1.5005 30.113 1.535 38.99 1.535 38.99 1.7717 45.000 1.785 45.34 1.9380 49.225 2.1880 55.575

⁷⁄₈

14R4-208E3

(W208PPB14)

2

1³⁄₁₆

19R208E3

(W208PPB7)

1

1³⁄₁₆

19R3-208E3

(W208PPB4)

3

1¹⁄₂

24R6-208E3

(W208PPB2)

2

1¹⁄₂

24R3-209E3

(W209PPB4)

3

1¹⁄₂

24R4-209E3

(W209PPB6)

2

R3-209E3

(W209PPB2)

3

28R3-210E3

(W210PPB5)

3

1¹⁵⁄₁₆ 31R3-210E3

(W210PPB2)

3

2³⁄₁₆

(W211PPB2)

3

45 1³⁄₄

35R3-211E3

H

J

G

Inner ring width

Outer ring width

N

.719 18.26 .594 15.08 .594 15.08 .844 21.43 .594 15.08 .719 18.26 .594 15.08 .594 15.08 .594 15.08 .656 16.67

1.4375 36.512 1.1875 30.162 1.1875 30.162 1.6875 42.862 1.1875 30.162 1.4375 36.512 1.1875 30.162 1.1875 30.162 1.1875 30.162 1.3125 33.338

1.1875 30.162 .7087 18.000 1.1875 30.162 1.1875 30.162 1.1875 30.162 1.1875 30.162 1.1875 30.162 1.1875 30.162 1.1875 30.162 1.3125 33.338

2.083 52.91 2.083 52.91 2.083 52.91 2.083 52.91 2.281 57.94 2.281 57.94 2.281 57.94 2.475 62.86 2.475 62.86 2.749 69.82

B Tolerance + .0000" +0.000 mm –.010 – 0.25 –.0005 – 0.013 –.0005 – 0.013 –.0005 – 0.013 –.010 – 0.25 –.010 – 0.25 –.0005 – 0.013 –.010 – 0.25 –.0005 – 0.013 –.0005 – 0.013

Tolerance + .0000" +0.000 mm

Outside diameter

3.438 87.32 3.1496 80.000 3.1496 80.000 3.1496 80.000 3.3465 85.000 3.438 87.32 3.3465 85.000 3.5433 90.000 3.5433 90.000 3.9370 100.000

‡

–.0005 – 0.013

–.0006 – 0.015

Please consult for availability. ‡ Unground spherical O.D. tolerance, ±.005" (±0.13 mm). Center portion of O.D. is cylindrical.

Round Bore Ball Bearings Cylindrical O.D. Triple Lip Seals Non-relubricatable

Style 1


A Bearing number

Industry number

1³⁄₁₆

19RB208E3

(W208PP7)

1

1³⁄₁₆

19RB3-208E3

(W208PP4)

3

1¹⁄₂

24RB6-208E3

(W208PP2)

2

1¹⁄₂

24RB8-208E3

(W208PP10)

1

1¹⁵⁄₁₆

31RB3-210E3

(W210PP2)

3

2³⁄₁₆

35RB3-211E3

(W211PP2)

3

mm inches

Please consult for availability. Selection guide, pages B-9, B-10. Load ratings, pages B-11, B-12. Additional information, page B-77.

B-71

Style

Bearing bore

1.1880 30.175 1.1880 30.175 1.5005 38.113 1.5005 38.113 1.9380 49.225 2.1880 55.575

Style 2 H

J

G

Inner ring width

Outer ring width

N

.594 15.08 .594 15.08 .844 21.43 .844 21.43 .594 15.08 .656 16.67

1.1875 30.162 1.1875 30.162 1.6875 42.862 1.6875 42.862 1.1875 30.162 1.3125 33.338

.7087 18.000 1.1875 30.162 1.1875 30.162 .8268 21.000 1.1875 30.162 1.3125 33.338

2.083 52.91 2.083 52.91 2.083 52.91 2.083 52.91 2.475 62.86 2.749 69.82

B Tolerance + .0000" +0.000 mm

Outside diameter

– 0.0005 – 0.013

3.1496 80.000 3.1496 80.000 3.1496 80.000 3.1496 80.000 3.5433 90.000 3.9370 100.000

Tolerance + .0000" +0.000 mm

–.0005 – 0.013

–.0006 – 0.015

Style 3

Round Bore Ball Bearings Alignable Spherical O.D. Triple Lip Seals Relubricatable

Style 3


A Bearing number

Industry number

Style

1³⁄₈

22RG3-210E3

(GW210PPB3)

3

1¹⁄₂

24RG3-209E3

(GW209PPB4)

3

1⁵⁄₈

26RG3-211E3

(GW211PPB4)

3

RG3-209E3

(GW209PPB2)

3

28RG3-210E3

(GW210PPB5)

3

1¹⁵⁄₁₆ 31RG3-210E3

(GW210PPB2)

3

2³⁄₁₆

(GW211PPB2)

3

45 1³⁄₄

35RG3-211E3

B Tolerance + .0000" +0.000 mm

Bearing bore 1.4065 35.725 1.535 38.99 1.660 42.16 1.7717 45.000 1.785 45.34 1.9380 49.225 2.1880 55.575

–.0005 – 0.013 –.010 – 0.25 –.010 – 0.25 –.0005 – 0.013 –.010 – 0.25 –.0005 – 0.013 –.0005 – 0.013

Tolerance + .0000" +0.000 mm

Outside diameter 3.5433 90.000 3.3465 85.000 3.9370 100.000 3.3465 85.000 3.5433 90.000 3.5433 90.000 3.9370 100.000

–.0006 – 0.015

G

.594 15.08 .594 15.08 .656 16.67 .594 15.08 .594 15.08 .594 15.08 .656 16.67

H

J

Inner ring width

Outer ring width

1.1875 30.162 1.1875 30.162 1.3125 33.338 1.1875 30.162 1.1875 30.162 1.1875 30.162 1.3125 33.338

1.1875 30.162 1.1875 30.162 1.3125 33.338 1.1875 30.162 1.1875 30.162 1.1875 30.162 1.3125 33.338

N

Y

2.475 62.86 2.281 57.94 2.749 69.82 2.281 57.94 2.475 62.86 2.475 62.86 2.749 69.82

.255 6.48 .248 6.30 .267 6.78 .248 6.30 .255 6.48 .255 6.48 .267 6.78

N

Y

2.475 62.86 2.749 69.82 2.475 62.86 2.749 69.82

.255 6.48 .267 6.78 .255 6.48 .267 6.78

Please consult for availability.

Round Bore Ball Bearings Cylindrical O.D. Triple Lip Seals Relubricatable


Style 3 A

Bearing number

Industry number

Style

1³⁄₈

22RBG3-210E3

(GW210PP3)

3

1⁵⁄₈

26RBG3-211E3

(GW211PP4)

3

1¹⁵⁄₁₆

31RBG3-210E3

(GW210PP2)

3

2³⁄₁₆

35RBG3-211E3

(GW211PP2)

3

B

Bearing bore

Tolerance + .0000" +0.000 mm

1.4065 35.725 1.660 42.16 1.9380 49.225 2.1880 55.575

–.0005 – 0.013 –.010 – 0.25 –.0005 – 0.013 –.0005 – 0.013

Outside diameter 3.5433 90.000 3.9370 100.000 3.5433 90.000 3.9370 100.000

Tolerance + .0000" +0.000 mm

–.0006 –0.015

G

.594 15.08 .656 16.67 .594 15.08 .656 16.67

H

J

Inner ring width

Outer ring width

1.1875 30.162 1.3125 33.338 1.1875 30.162 1.3125 33.338

1.1875 30.162 1.3125 33.338 1.1875 30.162 1.3125 33.338


B-72

Square Bore Ball Bearings Alignable Spherical O.D. Triple Lip Seals Non-relubricatable

Style 1

Style 2

Style 3

Dimensions (inches/mm) Square Shaft size, inches

A Bearing number

Industry number

Style

⁷⁄₈

14S4-208E3

(W208PPB11)

2

1

16S5-208E3

(W208PPB6)

1

1

16S2-208E3

(W208PPB9)

2

1¹⁄₈

18S5-2E08E3 (W208PPB5)

1

1¹⁄₈

18S2-2E08E3 (W208PPB8)

2

1¹⁄₈

18S4-2E08E3 (W208PPB12)

2

1¹⁄₄

20S2-209E3

(W209PPB5)

2

1¹⁄₄

20S4-209E3

(W209PPB7)

2

1¹⁄₂

24S3-211E3

(W211PPB3)

3

Bearing bore .905 22.99 1.030 26.16 1.030 26.16 1.185 30.10 1.185 30.10 1.185 30.10 1.280 32.51 1.280 32.51 1.530 38.86

B Tolerance

Outside diameter

Tolerance + .0000" +0.000 mm

G

‡

±.005 ±0.13

3.438 87.32 3.1496 80.000 3.1496 80.000 3.1496 80.000 3.1496 80.000 3.438 87.32 3.3465 85.000 3.438 87.32 3.9370 100.000

.719 18.26 .719 18.26 .719 18.26 .719 18.26 .719 18.26 .719 18.26 .719 18.26 .719 18.26 .656 16.67

–.0005 – 0.013

‡ –.0006 – 0.015 ‡ –.0006 – 0.015

H

J

Inner ring width

Outer ring width

N

1.4375 36.512 1.4375 36.512 1.4375 36.512 1.4375 36.512 1.4375 36.512 1.4375 36.512 1.4375 36.512 1.4375 36.512 1.3125 33.338

1.1875 30.162 .7087 18.000 1.1875 30.162 .7087 18.000 1.1875 30.162 1.1875 30.162 1.1875 30.162 1.1875 30.162 1.3125 33.338

2.083 52.91 2.083 52.91 2.083 52.91 2.083 52.91 2.083 52.91 2.083 52.91 2.281 57.94 2.281 57.94 2.749 69.82

Please consult for availability. ‡ Unground spherical O.D. tolerance, ±.005" (±0.13 mm). Center portion of O.D. is cylindrical.

Square Bore Ball Bearings Cylindrical O.D. Triple Lip Seals Non-relubricatable Dimensions (inches/mm) Square Shaft size, inches

Style 1 A

Bearing number

Industry number

Style

⁷⁄₈

14SB5-208E3

(W208PP13)

1

1

16SB5-208E3

(W208PP6)

1

1

16SB2-208E3

(W208PP9)

2

1¹⁄₈

18SB5-2E08E3 (W208PP5)

1

1¹⁄₈

18SB2-2E08E3 (W208PP8)

2

1¹⁄₂

24SB3-211E3

3

(W211PP3)


B-73

Bearing bore

.905 22.99 1.030 26.16 1.030 26.16 1.185 30.10 1.185 30.10 1.530 38.96

Style 2

B Tolerance

±.005 ±0.13

Outside diameter

3.1496 80.000 3.1496 80.000 3.1496 80.000 3.1496 80.000 3.1496 80.000 3.9370 100.000

Tolerance + .0000" +0.000 mm

–.0005 – 0.013

–.0006 – 0.015

G

.719 18.26 .719 18.26 .719 18.26 .719 18.26 .719 18.26 .656 16.67

Style 3 H

J

Inner ring width

Outer ring width

1.4375 36.512 1.4375 36.512 1.4375 36.512 1.4375 36.512 1.4375 36.512 1.3125 33.338

.7087 18.000 .7087 18.000 1.1875 30.162 .7087 18.000 1.1875 30.162 1.3125 33.338

N

2.083 52.91 2.083 52.91 2.083 52.91 2.083 52.91 2.083 52.91 2.749 69.82

Square Bore Ball Bearings Alignable Spherical O.D. Triple Lip Seals Relubricatable

Style 1

Style 2

Style 3


1

A Bearing number

16SG5-208E3

Industry number

Style

(GW208PPB6)

Bearing bore

1

1¹⁄₈

18SG5-2E08E3

(GW208PPB5)

1

1¹⁄₈

18SG2-2E08E3 (GW208PPB8)

2

1¹⁄₄

20SG5-209E3

(GW209PPB8)

1

1¹⁄₂

24SG3-211E3

(GW211PPB3)

3

B Tolerance

1.030 26.16 1.185 30.10 1.185 30.10 1.280 32.51 1.530 38.86

±.005 ±0.13

Outside diameter

G

Tolerance

3.1496 80.000 3.1496 80.000 3.1496 80.000 3.3465 85.000 3.9370 100.000

+.0000 –.0005 +0.000 ±0.013 +0.000 –.0006 +0.000 –0.015

.719 18.26 .719 18.26 .719 18.26 .719 18.26 .656 16.67

H Inner ring width 1.4375 36.512 1.4375 36.512 1.4375 36.512 1.4375 36.512 1.3125 33.338

J Outer ring width

N

Y

.8661 22.000 .8661 22.000 1.1875 30.162 .8661 22.000 1.3125 33.338

2.083 52.91 2.083 52.91 2.083 52.91 2.281 57.94 2.749 69.82

.253 6.43 .253 6.43 .253 6.43 .254 6.45 .267 6.78

Please consult for availability.

Square Bore Ball Bearings Cylindrical O.D. Triple Lip Seals Relubricatable Style 1


A Bearing number

Industry number

Style

Bearing bore 1.280 32.51 1.530 38.86

1¹⁄₄

20SBG5-209E3

(GW209PP8)

1

1¹⁄₂

24SBG3-211E3

(GW211PP3)

3

Style 3

B Tolerance

±.005 ±0.13

Outside diameter 3.3465 85.000 3.9370 100.000

Tolerance

+0.000 –.0006 +0.000 –0.015

G

.719 18.26 .656 16.67

H Inner ring width

J Outer ring width

N

Y

1.4375 36.512 1.3125 33.338

.8661 22.000 1.3125 33.338

2.281 57.94 2.749 69.82

.254 6.45 .267 6.78


B-74

Additional Information

Series 3-U200, 3-Y200 Standard Duty Ball Bearing Units Additional Features: All 3-200 mounted units can be purchased with formed steel closed end caps on the collar side which cover all rotating elements. Two bearing seals are provided with all open or closed end units on series 3-U200 and 3-Y200. Closed end units require specially counter bored housings on these series. Closed end units are designated with the suffix C (i.e. P3U231NC). Shafting should not extend beyond the bearing inner ring more than ¹⁄₈" (3.2 mm) when end caps are to be used. Closed end unit is not available for PT3 tapped base pillow blocks. Series 3-200 mounted units have drilled or cored mounting bolt holes suitable for the inch or metric bolts listed. Drilled holes will be ¹⁄₃₂" (0.8 mm) larger than the largest inch shown. Cast slots in pillow blocks are normally ¹⁄₁₆" wider than the specified mounting bolt nominal diameter. It is expected that plain washers will be used under the bolt head to span the slot width and aid torquing. Narrow (N) series washers per ANSI B18.22.1-1981 (previously designated SAE series) are recommended. If wide series washers are

used, the full length of the slot may not be usable for positioning the unit. Sealed bearings can be replaced in series 3-200 mounted units. It is normally recommended, however, that complete units be replaced to assure a good fit between the bearing O.D. and the housing bore. Service instructions for mounting are included with each replacement bearing and should be carefully followed.

Operation: Series 3-200 mounted units are prelubricated with a good quality petroleum grease of No. 2 consistency which has been tested for operational characteristics and stability for long shelf life. The service instructions packed with each unit provide guidelines for relubrication intervals and recommended greases. The lubricant furnished is generally limited to an operating temperature range of –20°F to +200°F (–29 ° to 93 °C). The lip seals N and E3 should be limited to a temperature less than 225°F (107 °C).

Recommended Shaft Tolerances:

The service life of a collar mounted bearing is largely dependent on shaft fit and may be expected to approach Shaft Diameter Tolerance theoretical L₁₀ life only if the bearing is ¹⁄₂"-2" Nominal to –.0005" press fitted to a shaft. A slip fit mounting in 2¹⁄₁₆"-4" Nominal to –.0010" accordance with the shaft tolerances 17 mm-50 mm Nominal to –0.013 mm shown in table will provide generally 55 mm-100 mm Nominal to –0.025 mm acceptable service life on normal applications under light to moderate load and speed conditions. A shaft tolerance The above shaft tolerances resulting in looser fits (such as with are suitable for loads up to .18C and L₁₀ life commercial shafting) may be expected to greater than 20,000 hours. For more have greatly reduced reliability and severe conditions, consult Link-Belt increasing problems of shaft fret wear, Bearing Division. bearing inner ring fracture and shaft

Warning: The correct selection of bearings or mounted units requires that the magnitude and nature of all loads, speeds, alignment, mounting, operating requirements, and maintenance be adequately considered. The selection of materials for and design of housings, shafting, fasteners, seals, and accessories, as well as provisions for installation and maintenance, must follow good engineering principles. Housings must be selected and installed with regard to the degree and direction of the forces that will occur. Housings should B-75

not be used under tension loads except with adequate safety factors. For this reason pillow blocks are best suited to withstand radial loads ing through the base. When heavy loads or shock loads are possible, it is most important to mount a unit so that the unit is directly and substantially ed other than through its mounting bolts. Where the line of force falls outside the base, such as with horizontal or uplift loads on pillow blocks, serious housing and fastener deflection or failure may occur. These conditions may require designs using different materials, fasteners, mounting design, stop bars, etc., together with proper safety factors.

Where significant thrust loads are applied to Standard Duty Ball Bearing Units, thrust collars, spacers, shaft shoulders etc. should be utilized to the thrust so that it is not transmitted through the locking collars. Imposed radial loads should not exceed 25% of bearing basic load rating; where high speeds, thrust loads, or vibratory loads are unavoidable, consult Link-Belt Bearing Division.

Takeups: The mounting of 3-200 pillow blocks on universal takeup frames is illustrated on page B-60. For replacement bearing units in takeups, specify takeup part number without prefix S and adjustment (i.e. TA3U215N, TD3-U231N). Frames for takeup units must be securely fastened to their s.

Mountings: Two-bolt FX housings have fully machined mounting surfaces; for maximum stability, radial load should be along center line of bolts.

slippage. In general, looser fits than recommended are feasible only for very light loading and lower speeds. Prototype or field testing is strongly recommended if looser fits must be considered. Shafting should be designed for adequate strength and stiffness for the intended application. It should be round, straight, free of nicks and burrs and of correct size.

When these conditions are unavoidable, Link-Belt Bearing Division should be consulted. Service instructions are provided with shipments of bearings and are available on request. These instructions provide detailed information to aid in the proper installation, operation, and maintenance, and should be carefully read and followed. Failure to do so may result in unsatisfactory service as well as serious personal injury or property damage.


Series 3-W200, 3-S200, U200, W200, Y200 Intermediate Ball Bearing Units Additional Features: Series 3-W200, 3-S200, U200, W200, Y200 mounted units have cored or drilled mounting bolt holes suitable for the inch or metric round or carriage bolts listed. Drilled holes will be ¹⁄₃₂" (0.8 mm) larger than the largest inch shown. Cast slots in pillow blocks are normally ¹⁄₁₆" wider than the specified mounting bolt nominal diameter. It is expected that plain washers will be used under the bolt head to span the slot width and aid torquing. Narrow (N) series washers per ANSI B18.22.1-1981 (previously designated SAE series) are recommended. If wide series washers are used, the full length of the slot may not be usable for positioning the unit. Two bolt FX high-test iron flanged housings have stabilizing pads for fourpoint load . For maximum stability, the radial load should be in line with the centerline of the mounting bolts. Sealed bearings can be replaced in series 3-W200, 3-S200, U200, W200, Y200 mounted units. It is normally recommended, however, that complete units be

Recommended Shaft Tolerances: Shaft Diameter Tolerance ¹⁄₂"—2" Nominal to –.0005" 17 mm —50 mm Nominal to –0.013 mm The above shaft tolerances are suitable for loads up to .18C for series U200 and Y200 and loads up to .11C for series W200 and S200 and L₁₀ life greater than 20,000 hours. For more severe conditions, consult Link-Belt Bearing Division.

replaced to assure a good fit between the bearing O.D. and the housing bore. Service instructions for mounting are included with each replacement bearing and should be carefully followed. Replacement bearings for intermediate mounted units are sealed and prelubricated. 3-W200 and 3-S200 intermediate ball bearing units are available with closed end caps, except for PT3-S200E and PT3-U200N.

Operation: Series 3-W200, 3-S200, U200, W200 and Y200 intermediate ball bearing mounted units are prelubricated with a good quality petroleum grease of No. 2 consistency which has been tested for operational characteristics and stability for long shelf life. The service instructions packed with each unit provide guidelines for relubrication intervals and recommended greases. The lubricant furnished is generally limited to an operating temperature range of –20°F to +200°F (–29 ° to 93 °C). Lip seals should be limited to a temperature less than 225°F (107 °C).

Where significant thrust loads are applied to intermediate ball bearing units, thrust collars, spacers, shaft shoulders, etc. should be utilized to the thrust so that it is not transmitted through the locking collars. Imposed radial loads should not exceed .15C for S200 and W200 or .25C for U200 and Y200 bearings. Where high radial loads, high speeds, thrust loads or vibratory loads are unavoidable, consult the Link-Belt Bearing Division. Formed steel housings have radial load ratings which should not be exceeded. Thrust ratings are basically 50% of the radial ratings. Loads other than down through the pillow block (style PS) base should be avoided.

The service life of a collar mounted bearing is largely dependent on shaft fit and may be expected to approach theoretical L₁₀ life only if the bearing is press fitted to a shaft. A slip fit mounting in accordance with the shaft tolerances shown in table will provide generally acceptable service life on normal applications under light to moderate load and speed conditions. A shaft tolerance resulting in looser fits (such as with commercial shafting) may be expected to have greatly reduced reliability and increasing problems of shaft fret wear, bearing inner ring fracture and shaft

slippage. In general, looser fits than recommended are feasible only for very light loading and lower speeds. Prototype or field testing is strongly recommended if looser fits must be considered.

not be used under tension loads except with adequate safety factors. For this reason pillow blocks are best suited to withstand radial loads ing through the base. When heavy loads or shock loads are possible, it is most important to mount a unit so that the unit is directly and substantially ed other than through its mounting bolts. Where the line of force falls outside the base, such as with horizontal or uplift loads on pillow blocks, serious housing and fastener deflection or failure may occur. These conditions may require designs using different materials, fasteners, mounting design, stop bars,

etc., together with proper safety factors. When these conditions are unavoidable Link-Belt Bearing Division should be consulted.

Shafting should be designed for adequate strength and stiffness for the intended application. It should be round, straight, free of nicks and burrs and of correct size.

Warning: The correct selection of bearings or mounted units requires that the magnitude and nature of all loads, speeds, alignment, mounting, operating requirements, and maintenance be adequately considered. The selection of materials for and design of housings, shafting, fasteners, seals, and accessories, as well as provisions for installation and maintenance, must follow good engineering principles. Housings must be selected and installed with regard to the degree and direction of the forces that will occur. Housings should

Service instructions are provided with shipments of bearings and are available on request. These instructions provide detailed information to aid in the proper installation, operation, and maintenance, and should be carefully read and followed. Failure to do so may result in unsatisfactory service as well as serious personal injury or property damage.

B-76


Series U200, S200, W200, Y200, Collar/Set Screw Mounted Ball Bearings Series Round, Square and Hex Bore Ball Bearings Additional Features: Cylindrical O.D. collar mounted or round, square and hex bore bearings are made for mounting in customer manufactured housings or machine frames. Dimensions for machined bores to hold cylindrical O.D. bearings are on page B-82. Formed steel flanged housings consist of two housing halves in which can be mounted spherical O.D. collar mounted or round, square and hex bore bearings. Initial bearing alignment is obtained when the two halves are bolted around the bearing during mounting. It is best to position all bearings and housings correctly before final mounting bolt tightening.

Recommended Shaft Tolerances For U200, S200, W200, Y200 Shaft Diameter Tolerance ¹⁄₂"—2" Nominal to –.0005" 17 mm —50 mm Nominal to –0.013 mm The above shaft tolerances are suitable for loads up to .18C for series U200 and Y200 and loads up to .11C for series W200 and S200 and L₁₀life greater than 20,000 hours. For more severe

Warning: The correct selection of bearings or mounted units requires that the magnitude and nature of all loads, speeds, alignment, mounting, operating requirements, and maintenance be adequately considered. The selection of materials for and design of housings, shafting, fasteners, seals, and accessories, as well as provisions for installation and maintenance, must follow good engineering principles. Housings must be selected and installed with regard to the degree and direction of

B-77

Round, square and hex bore bearings are available in a variety of styles (1, 2, 3, etc.) to be completely adaptable for individual applications. Style 2 and 3 outer rings overhang the seal assemblies to give additional protection from fibre wrappage. Style 2 inner rings are extra long to act as spacers between machine components.

Operation:

environment conditions prevalent. Recommendations for specific lubricants and relubrication intervals can be obtained from Link-Belt Bearing Division. Imposed radial loads should not exceed .15C for S200 and W200 or .25C for U200 and Y200 bearings. Where high radial loads, high speeds, thrust loads or vibratory loads are unavoidable, consult the Link-Belt Bearing Division.

Series 200 collar mounted and round, square and hex bore ball bearings are prelubricated with a good quality petroleum grease of No. 2 consistency which has been tested for operational characteristics and stability for long shelf life. Relubricatable bearings should be greased at a frequency depending on the

Shaft locking of round bore bearings is usually accomplished by clamping an assembly along the shaft.

conditions, consult Link-Belt Bearing Division.

commercial shafting) may be expected to have greatly reduced reliability and increasing problems of shaft fret wear, bearing inner ring fracture and shaft slippage. In general, looser fits than recommended are feasible only for very light loading and lower speeds. Prototype or field testing is strongly recommended if looser fits must be considered.

The service life of a collar mounted bearing is largely dependent on shaft fit and may be expected to approach theoretical L₁₀ life only if the bearing is press fitted to a shaft. A slip fit mounting in accordance with the shaft tolerances shown in table will provide generally acceptable service life on normal applications under light to moderate load and speed conditions. A shaft tolerance resulting in looser fits (such as with

the forces that will occur. Housings should not be used under tension loads except with adequate safety factors. For this reason pillow blocks are best suited to withstand radial loads ing through the base. When heavy loads or shock loads are possible, it is most important to mount a unit so that the unit is directly and substantially ed other than through its mounting bolts. Where the line of force falls outside the base, such as with horizontal or uplift loads on pillow blocks, serious housing and fastener deflection or failure may occur. These conditions may require designs using different materials,

Square bore bearings are finished for use with AISI hot rolled, carbon steel square bars with round corners. Hex bore bearings are finished for use with AISI cold drawn, carbon steel hex bars.


fasteners, mounting design, stop bars, etc., together with proper safety factors. When these conditions are unavoidable Link-Belt Bearing Division should be consulted. Service instructions are provided with shipments of bearings and are available on request. These instructions provide detailed information to aid in the proper installation, operation, and maintenance, and should be carefully read and followed. Failure to do so may result in unsatisfactory service as well as serious personal injury or property damage.

Nomenclature

Series 200 Standard Duty Ball Bearing Units Symbol F FB FF FC FX HM P PH PL PT

Description

PL

3

3

Integral bearing seals

Wide inner ring, spring locking, relubricatable Wide inner ring, eccentric cam locking collar, relubricatable

2

Series 200 ball bearing designation

B E

Inner ring bore equal to a bore of preceding smaller bearing group Inner ring bore equal to a bore of following larger bearing group

H N E3 C K75

2

E

20

H

C

K75

U

G

2

E

20

N

K75

Flanged unit, 3 and 4 bolt Flanged bracket, 3 bolt Flanged screw conveyor unit, 4-bolt Flanged cartridge unit, 4-bolt round Flanged unit, 2-bolt Hanger, screw conveyor unit Pillow block, standard backing Pillow block, high backing Pillow block, low backing Pillow block, tapped base

U Y

20 M50

U

For standard duty units

Shaft diameter, in sixteenths of an inch Shaft diameter, metric series, in millimeters Floating labyrinth seals Single lip seals Triple lip seals Closed end unit Nickel plated housing

Intermediate Duty Ball Bearing Units Symbol W F FB3 FR FS FSA FSX FX FXR PS P3 PL3 S U Y W None G

W

Description

F

DURA-KLEAN housing Flanged unit, 3 and 4 bolt Flanged bracket, 3 bolt Flanged unit, 3 and 4-bolt, inboard mounting Flanged unit, 3 and 4-bolt round, formed steel Flanged unit, 3-bolt triangular, formed steel Flanged unit, 2-bolt, formed steel Flanged unit, 2-bolt Flanged unit, 2-bolt inboard mounting Pillow block, formed steel housing Pillow block, standard backing Pillow block, low backing Extended inner ring, spring locking Wide inner ring, spring locking Wide inner ring, eccentric cam locking collar Extended inner ring, eccentric cam locking collar Non-relubricatable bearing Relubricatable bearing

For intermediate units

2


B E


20 M30 E H N U E3

Shaft size in sixteenths of an inch Shaft diameter, metric series, in millimeters Molded single lip seals Floating labyrinth seals Single lip seals seals (W200 only) Triple lip seals

K75 Nickel plated housing Continued next page.

B-78

Klean-Gard Units Symbol

Description

K KL

Polyamide housing material Polypropylene housing material

F FX P

Four bolt flanged housing Two bolt flanged housing Pillow Block

K

S

Extended inner ring, spring locking

2


E

Inner ring bore equal to a bore of following larger bearing group

20 M30 None C D DC

FX - S

2

DC

20

E

Shaft size in sixteenths of an inch Shaft diameter, metric series, in millimeters Open end unit, basic unit Closed end unit, no auxiliary seals Open end unit, end cap with seals and rear auxiliary dual lip seal Closed end unit, end cap and rear auxiliary dual lip seal

Ball Bearing Takeup Units Symbol T TH TAS TDS TGS NT LC

Description

2

39

N

C - 18

Universal conveyor takeup frame, welded steel lilght duty frames only Bearing design, integral seals

U

Wide inner ring, spring locking

2

Series 200 ball bearing designation Shaft diameter, in sixteenths of an inch Shaft diameter, metric series, in millimeters

N

Single lip seals

C

Closed end unit

18

3 - U

Takeup unit, standard slot Takeup unit, wide slot Conveyor takeup, formed steel frame Conveyor takeup, hinged top, welded steel frame Conveyor elevator takeup, welded steel frame Conveyor takeup, welded channel frame

3

39 M60

TDS

Takeup adjustment, inches

For bearing nomenclature see following pages. The nomenclature shown is provided to identify the basic and optional features of bearing and mounted unit assemblies. The most commonly specified variations are listed; however, availability of all variations cannot be assumed. Link-Belt Bearing Division should be consulted regarding optional features, availability, and the application requirements.

B-79

Nomenclature

Series U200, S200, W200, Y200 Collar Mounted Ball Bearings Symbol S U Y W

Description

U

G

2

B

08

H

L

Extended inner ring, spring locking Wide inner ring, spring locking Wide inner ring, eccentric cam collar Inner ring extended one side only, eccentric cam collar

None B

O.D. of outer ring is spherical O.D. of outer ring is cylindrical

None G

Non-relubricatable Relubricatable (two holes in outer ring@ 180!)

2


B E


08 M17

B

Shaft diameter in sixteenths of an inch Shaft diameter, metric series, in millimeters

E U N H E3

Molded single lip seals seals (W200 only) Lip seals Floating labyrinth seals Triple lip seals

L1 L

Bearing without collar Bearing with collar/set screws

The nomenclature shown is provided to identify the basic and optional features of bearing and mounted unit assemblies. The most commonly specified variations are listed; however, availability of all variations cannot be assumed. Link-Belt Bearing Division should be consulted regarding optional features, availability, and the application requirements.

B-80

Nomenclature

Hex, Square, and Round Bores Round, Square, Hex Bore Ball Bearings Symbol None 31 R S K

Description

31 R

None G

Non-relubricatable Relubricatable (two holes in outer ring @ 180!)

None 2 3 4 5 6 7 8

Metric width outer ring; basic inch width inner ring Basic inch width outer ring; intermediate inch width inner ring Basic inch width outer ring; basic inch width inner ring Basic inch width outer ring; unground spherical O.D. with flat ground cylindrical center; intermediate inch width inner ring Metric width outer ring; intermediate inch width inner ring Basic inch width outer ring; wide inch width inner ring Wide metric width outer ring; intermediate inch width inner ring Wide metric width outer ring; wide inch width inner ring

2


E

Bore is .031 inch oversize

N E3

3 - 2

10

E3

Bearing bore is round Bearing bore is square Bearing bore is hex O.D. of outer ring is spherical O.D. of outer ring is cylindrical

None J

G

Bore is basic metric size Shaft size in sixteenths of an inch

None B

10

B

One fifth of basic mm bore size Non-metallic retainer Formed steel retainer, two-piece Single lip seals Triple lip seals


B-81

Housing Bearing Seat Diameters For Cylindrical O.D. Ball Bearings Class of fit selection Housing construction

Housing rotating in relation to direction of load Housing not split radially Direction of load indeterminate

Housing split or not split radially

Class of fit L N6

Operating condition

Housing stationary in relation to direction of loads

Normal and heady loads Light loads Heavy shock loads Normal and heavy loads where outer ring does not have to be axially displaceable

Remarks

Outer ring not axially displaceable

M6

Outer ring, as a rule not axially displaceable

K6

Normal and light loads where displaceability of outer ring is desirable

Outer ring, as a rule, axially displaceable

J6

Shock loads, temporary complete unloading All loads

Housing not split radially

H6

Housing split radially

H7

Outer ring is easily displaceable axially

L For cast iron or steel housings. For housings of light metal, select tolerances which give slightly tighter fits than those shown.

Class of fit and housing bores (inches/µm) Bearing/housing diameter fitsG Basic size

Nominal bearing O.D. and housing bore

W200, Y200, U200,

R200, S200, K200,

2M17 211 2M20 212

... 204

40 47

1.5748 1.8504

2M25 2M30 2M35 2M40

216 219 223 225

205 206 207 208

52 62 72 80

2M45 2M50 2M55 2M60

228 231 235 239

209 210 211 ...

85 90 100 110

mm

Bearing O.D. tolerance g

H7

H6

J6

K6

M6

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

N6 Tolerance

Fit

Housing bore

+.0000 –.0005 +0 –13

.0000 .0015L 0 38L

–.0000 +.0010 –0 +25

.00000 .0011L 0 28L

–.0000 +.0006 –0 +15

.0002T .0009L 5T 23L

–.0002 +.0004 –5 +10

.0005T .0006L 13T 15L

–.0005 +.0001 –13 +2

.0008T .0003L 20T 8L

–.0008 –.0002 –20 –5

.0011T .0000 28T 0

–.0011 –.0005 –28 –13

2.0472 2.4409 2.8346 3.1496

+.0000 –.0005 +0 –13

.0000 .0017L 0 43L

–.0000 +.0012 –0 +30

.0000 .0012L 0 30L

–.0000 +.0007 –0 +17

.0002T .0010L 5T 26L

–.0002 +.0005 –5 +13

.0006T .0006L 15T 15L

–.0006 +.0001 –15 +2

.0010T .0002L 25T 5L

–.0010 –.0003 –25 –8

.0013T .0001T 33T 2T

–.0013 –.0006 – 43 –15

3.3465 3.5433 3.9370 4.3307

+.0000 –.0006 +0 –15

.0000 .0020L 0 50L

–.0000 +.0014 –0 +35

.0000 .0015L 0 38L

–.0000 +.0009 –0 +23

.0002T .0013L 5T 33L

–.0002 +.0007 –5 +18

.0007T .0008L 18T 20L

–.0007 +.0002 –18 +5

.0012T .0003L 30T 8L

–.0012 –.0003 – 30 –8

.0016T .0001T 40T 3T

–.0016 –.0007 – 40 –18

inches

Fit

Housing bore

Fit

Housing bore

Fit

Housing bore

Fit

Housing bore

Fit

Housing bore

Please consult for availability. 1µm = .001 mm The appropriate housing bore for any class of fit can be easily determined by applying the housing tolerance to the nominal housing bore. Example, (using basic size 211 and class of fit H7): inches mm Nominal housing bore = 1.5748 1.5748 40.000 40.000 Housing bore tolerance = – .0000 + .0010 –␣ 0.000 +␣ 0.025 Resultant housing bore = 1.5748 1.5758 40.000 40.025 G Symbol L indicates a loose or clearance fit. Symbol T indicates a tight or interference fit. g The arithmetical mean of the largest and smallest single diameter to be within tolerance shown. Allowable deviations from mean diameter per ANSI/ABMA Standard 20, latest printing.

B-82


Contents

Series 300

Series 300


Introduction ................................... C-1 Pictorial Index ............................... C-3 Selection ........................................ C-5 Load Ratings ................................. C-7 Dimensions .................................... C-9 Replacements ............................ C-16 Additional Information ............... C-17 Nomenclature ............................. C-18

Series 300 wide inner ring ball bearing units are designed for heavy duty applications requiring high capacity and compactness. Manufactured from quality alloy bearing steel to precision tolerances, these bearings are used extensively on general industrial equipment, high speed fans and blowers and heavier duty power transmission and material handling equipment.

a Spring locking collar and two setscrews lock inner ring securely to shaft. b Steel-clad molded Type H clearance seal. c Alignable, precision, deep groove ball bearing of quality alloy bearing steel provides high capacity for radial/thrust loads. d Wide inner ring for greater surface between shaft and bearing. e One-piece, cast iron housings available in many types for a variety of application requirements. f Prelubricated and relubricatable.

f b c

a d

e

C-1

Heavy Duty Ball Bearings Heavy series precision alignable ball bearings of deep groove construction with larger balls and thicker rings for high capacity and longer life. The extra inner ring width furnishes ultimate shaft and load and concentricity for high speed precision application. The spring locking collar design provides a secure grip of the wide inner ring bearing to

the shaft. The two set screws extend through the inner ring of the bearing and lock firmly into the shaft. Tightening the two set screws produces elastic strain in the spring locking collar resulting in a continuous pressure on the shaft. Furnished with anti-rotation pin in the outer ring to prevent the outer ring from spinning in the bearing housing.

Bearing Mounted Molded Rubber Seal TYPE H SEAL: These molded rubber seals effectively retain lubricant and protect against contamination. An external seal guard enhances protection against contamination and protects the molded rubber seal. A snap ring locates and retains the molded rubber seal in the outer ring to ensure proper operation. This is an excellent non- seal for grease lubrication.

One-piece Cast Iron Housings Compact, one-piece cast iron housings provide strength with minimum size and weight, and excellent rigidity. All housings are designed with standard mounting dimensions and have finished mounting surfaces for proper installation stability. Pillow blocks have slotted bolt holes with ample space provided for drilling dowel pin holes and are also available with high backing dimensions. Flanged and flanged

cartridge units have drilled mounting holes. Takeup units have machined slots for accurate adjustment.

C-2

Pillow Blocks, One-piece Housing P-U300, PE-U300, P2-U300 Alignable pillow blocks with standard backing for shaft sizes ³⁄₄" through 3¹⁵⁄₁₆". High backing units for shaft sizes from ⁷⁄₈" through 3¹⁵⁄₁₆". Open or closed end, fixed or expansion type units. Furnished with bearing clearance seals for grease lubrication. Load ratings on pages C-7 and C-8. Dimensions on pages C-9 and C-10. Additional information on page C-17.

Flanged Units F-U300, FE-U300 Alignable units for shaft sizes ³⁄₄" through 3¹⁵⁄₁₆". Open or closed end, fixed or expansion type units, drilled mounting holes, and machined surfaces. Furnished with bearing clearance seals for grease lubrication. Load ratings on pages C-7 and C-8. Dimensions on page C-11. Additional information on page C-17.

Flanged Cartridge Units FC-U300, FCE-U300 Alignable units for shaft sizes ³⁄₄" through 3¹⁵⁄₁₆". Open or closed end, fixed or expansion type units, drilled mounting holes, and machined mounting surfaces. Furnished with bearing clearance seals for grease lubrication. Load ratings on pages C-7 and C-8. Dimensions on page C-12. Additional information on page C-17.

Cartridge Units C-U300, CE-U300 Alignable units for shaft sizes ³⁄₄" through 3¹⁵⁄₁₆". Open or closed end, fixed or expansion type units. Furnished with bearing clearance seals for grease lubrication. Load ratings on pages C-7 and C-8. Dimensions on page C-13. Additional information on page C-17.

C-3

Takeup Frames LHD Heavy duty welded steel takeup frames. For use in mounting heavy duty ball bearing pillow blocks listed on page C-9. Dimensions on page C-15. Additional information on page C-17.

Takeup Units T-U300 Alignable units for takeup applications with shaft sizes ⁷⁄₈" through 2¹⁵⁄₁₆". Open or closed end and without frames, guides, or adjusting screws, Furnished with bearing clearance seals for grease lubrication. Load ratings on pages C-7 and C-8. Dimensions on page C-14. Additional information on page C-17.

Replacement Bearings UG300L Wide inner ring deep-groove single row ball bearings for shaft sizes ³⁄₄" through 3¹⁵⁄₁₆". Furnished with spring locking collar, stainless steel flingers, and seals. Load ratings on pages C-7 and C-8. Dimensions on page C-16. Additional information on page C-17.

C-4

Selection

Series 300 To select a bearing, determine the applied radial load, the applied thrust load, the desired Rating Life, and applicable operating conditions. The procedure shown here will aid in selecting a bearing to meet an L₁₀ design life. The formulas for calculating life expectancy should be used to determine the Rating Life L₁₀ for the bearing selected.

The selection procedures and rating formulas shown here are in agreement with The American Bearing Manufacturers Association Standards and ANSI/ABMA STD 9-1990. Ratings are based on fatigue life. The Rating Life L₁₀ or fatigue life at 90% reliability is the usual basis for bearing selection.

Bearing Selection Step 1

Determine an appropriate L₁₀ design life. Operating time, hours per year 500 to 750 1,400 to 1,600 2,000 4,000 8,700

Type of service Light seasonal usage Heavy seasonal usage Industrial—8 hour shift Industrial—16 hour shift Industrial—Continuous

Step 2

Determine a required

Design life, years 3-5 4-6 10 10 10

L₁₀ design life, hours 3,000 8,000 20,000 40,000 80,000 to 100,000

from Table 1.

Step 3 Calculate the required C and select a ball bearing. a For radial load only: P = Fr required C =

P using

from Step 2

Select a ball bearing from Table 3, page C-7 with a basic load rating C equal to or greater than the required C. b For combined radial and thrust loads when

is 0.19 or less:

P = Fr required C =

P using

from Step 2

Select a ball bearing from Table 3, page C-7 with a basic load rating C equal to or greater than the required C. c For combined radial and thrust loads when

is greater than 0.19,

use the following trial method: Maximum P = .56Fr + 2.30Fa Maximum required C =

P using

from Step 2

Select a trial ball bearing with a basic load rating C from Table 3, page C-7, approximately equal to the maximum required C. With this trial bearing calculate: Determine X and Y from Table 2. Calculate P for the trial bearing. P = XFr + YFa required C =

P for the trial bearing using

from Step 2.

Consult Table 3, page C-7, basic load rating. If a smaller bearing meets or nearly meets the required C, its life expectancy can be calculated. Note: If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp.

C-5

For radial load applications only, Table 4, page C-8, can be used to select a bearing or to determine life expectancy. To assure a satisfactory bearing application, fitting practice, mounting, lubrication, sealing, static rating, housing strength, operating conditions and maintenance must be considered.

Selection

Series 300 basic formulas:

symbols for formulas: C Co e Fa Fr L₁₀ n P X Y

= = = = = = = = = =


=

³ L₁₀ =

ratio Speed, n 50

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

100

200

300

400

500

600

700

800

2.08 2.62 2.29 2.88 2.46 3.10 2.62 3.30 2.88 3.63 3.10 3.91 3.30 4.15 3.47 4.37 3.63 4.57 3.77 4.75 3.91 4.92 4.21 5.30 4.47 5.64 4.71 5.93 4.92 6.20 5.12 6.45 5.30 6.68 5.64 7.10 5.93 7.47 6.20 7.81 6.45 8.13 6.68 8.42 7.65 9.63 8.42 10.6

3.30 3.63 3.91 4.15 4.57 4.92 5.23 5.51 5.76 5.99 6.20 6.68 7.10 7.47 7.81 8.13 8.42 8.94 9.41 9.84 10.2 10.6 12.1 13.4

3.77 4.15 4.47 4.75 5.23 5.64 5.99 6.30 6.59 6.86 7.10 7.65 8.13 8.55 8.94 9.30 9.63 10.2 10.8 11.3 11.7 12.1 13.9 15.3

4.15 4.57 4.92 5.23 5.76 6.20 6.59 6.94 7.25 7.54 7.81 8.42 8.94 9.41 9.84 10.2 10.6 11.3 11.9 12.4 12.9 13.4 15.3 16.8

4.47 4.92 5.30 5.64 6.20 6.68 7.10 7.47 7.81 8.13 8.42 9.07 9.63 10.1 10.6 11.0 11.4 12.1 12.8 13.4 13.9 14.4 16.5 18.1

4.75 5.23 5.64 5.99 6.59 7.10 7.54 7.94 8.30 8.63 8.94 9.63 10.2 10.8 11.3 11.7 12.1 12.9 13.6 14.2 14.8 15.3 17.5 19.3

5.01 5.51 5.93 6.30 6.94 7.47 7.94 8.36 8.74 9.09 9.41 10.1 10.8 11.3 11.9 12.3 12.8 13.6 14.3 14.9 15.5 16.1 18.4 20.3

5.23 5.76 6.20 6.59 7.25 7.81 8.30 8.74 9.14 9.50 9.84 10.6 11.3 11.9 12.4 12.9 13.4 14.2 14.9 15.6 16.2 16.8 19.3 21.2

1200 5.99 6.59 7.10 7.54 8.30 8.94 9.50 10.0 10.5 10.9 11.3 12.1 12.9 13.6 14.2 14.8 15.3 16.2 17.1 17.9 18.6 19.3 22.0 24.3

1500 6.45 7.10 7.65 8.13 8.94 9.63 10.2 10.8 11.3 11.7 12.1 13.1 13.9 14.6 15.3 15.9 16.5 17.5 18.4 19.3 20.0 20.7 23.7 26.1

2400 7.54 8.30 8.94 9.50 10.5 11.3 12.0 12.6 13.2 13.7 14.2 15.3 16.2 17.1 17.9 18.6 19.3 20.5 21.5 22.5 23.4 24.3 27.8 30.5

3600 6000 10000 8.63 10.2 12.1 9.50 11.3 13.4 10.2 12.1 14.4 10.9 12.9 15.3 12.0 14.2 16.8 12.9 15.3 18.1 13.7 16.2 19.3 14.4 17.1 20.3 15.1 17.9 21.2 15.7 18.6 22.0 16.2 19.3 22.8 17.5 20.7 24.6 18.6 22.0 26.1 19.6 23.2 27.5 20.5 24.3 28.7 21.3 25.2 29.9 22.0 26.1 31.0 23.4 27.8 32.9 24.6 29.2 34.6 25.8 30.5 36.2 26.8 31.8 37.7 27.8 32.9 39.0 31.8 37.7 44.6 35.0 41.4 49.1

Speed, n 3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

900 5.44 5.99 6.45 6.86 7.54 8.13 8.63 9.09 9.50 9.88 10.2 11.0 11.7 12.3 12.9 13.4 13.9 14.8 15.5 16.2 16.9 17.5 20.0 22.0

1000 5.64 6.20 6.68 7.10 7.81 8.42 8.94 9.41 9.84 10.2 10.6 11.4 12.1 12.8 13.4 13.9 14.4 15.3 16.1 16.8 17.5 18.1 20.7 22.8

1800 6.86 7.54 8.13 8.63 9.50 10.2 10.9 11.4 12.0 12.4 12.9 13.9 14.8 15.5 16.2 16.9 17.5 18.6 19.6 20.5 21.3 22.0 25.2 27.8

¹⁄₃

u 1,000,000 n u 60

Life Expectancy


L₁₀ u n u 60 1,000,000

To calculate the Rating Life L₁₀ of any selected or trial bearing: Step 1 Determine the equivalent radial load P. a For radial load only: P = Fr b For combined radial and thrust load: P = XFr + YFa using X and Y from Table 2 below. Step 2 Calculate the ratio of basic load rating C to the equivalent radial load. C P Step 3 Approximate the bearing life from Table 1. Table 2 • X and Y factors for ball bearings ≤ e

L e

e .19 .21 .22 .24

X 1.0 1.0 1.0 1.0

Y 0 0 0 0

X .56 .56 .56 .56

Y 2.30 2.15 1.99 1.85

100 125 150 200

.26 .27 .28 .30

1.0 1.0 1.0 1.0

0 0 0 0

.56 .56 .56 .56

1.71 1.63 1.56 1.45

300 500 750 1000

.34 .38 .42 .44

1.0 1.0 1.0 1.0

0 0 0 0

.56 .56 .56 .56

1.31 1.15 1.04 1.00

25 37.5 50 75

For values between those in the table linear interpolation can be used. Nd2 values are given in Table 3, p. C-7.

Life Adjustment The Rating Life, L₁₀, may be modified for some applications in accordance with the formula Ln = a₁a₂a₃L₁₀ where Ln = Adjusted life for (100-n) % reliablility, a₁ = Life adjustment factor for reliability a₂ = Life adjustment factor for material and processing a₃ = Life adjustment factor for operating conditions. For most normal applications, all factors will be taken as 1, and the Rating Life used as the selection basis or life estimate. In addition, as long as standard catalog bearings are used, a₂ will be normally set equal to one. The factor a₃ covers such things as lubrication, misalignment, and temperature. Some conditions that could yield a₃ significantly different than unity include speeds less than 20000 DN or greater than 200000 DN, temperatures below –40°F (–40°C) or above 275°F (135°C). For other possible conditions, as well as additional information on link adjustment factors, consult Link-Belt Bearing Division, Rexnord Corp. C-6

Load Ratings

Series 300 Table 3 • Load ratings, speed limits and ball data Shaft diameter

Bearing size number

inches


C Basic load rating

d Ball diameter

N Number of balls

Nd2

newtons

pounds

newtons

pounds

³⁄₄

312

7 890

1770

12 370

2780

10950

³⁄₈

7

⁷⁄₈ ¹⁵⁄₁₆ 1

314 315 316

10 900

2450

16 460

3700

9350

⁷⁄₁₆

7

1.34

1¹⁄₈ 1³⁄₁₆

318 319

15 700

3530

21 660

4870

8300

³¹⁄₆₄

8

1.88

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

320 322 323

19 100

4290

25 620

5760

7550

¹⁷⁄₃₂

8

2.26

1¹⁄₂

324

24 000

5390

31 230

7020

7200

¹⁹⁄₃₂

8

2.82

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

326 327 328

31 600

7110

40 750

9160

6200

¹¹⁄₁₆

8

3.78

1¹⁵⁄₁₆

331

37 800

8500

47 600

10700

5600

³⁄₄

8

4.50

2 2¹⁄₈ 2³⁄₁₆

332 334 335

44 600

10000

55 200

12400

4950

¹³⁄₁₆

8

5.28

2¹⁄₄ 2⁷⁄₁₆

336 339

51 900

11700

62 700

14100

4450

⁷⁄₈

8

6.12

2¹¹⁄₁₆ 2³⁄₄

343 344

68 100

15300

80 100

18000

3950

1

8

8.00

2¹⁵⁄₁₆

347

77 100

17300

88 100

19800

3700

1¹⁄₁₆

8

9.03

3 3³⁄₁₆

348 351

86 600

19500

93 900

21100

3400

1¹⁄₈

8

10.1

3⁷⁄₁₆ 3¹⁄₂

355 356

107 200

24100

109 400

24600

3100

1¹⁄₄

8

12.5

3¹⁵⁄₁₆

363

140 500

31600

133 400

30000

2750

1⁷⁄₁₆

8

16.5

If the load P is greater than .25C, Consult Link-Belt Bearing Division, Rexnord Corp. V Based on grease lubrication and moderate load. Additional information, page C-17.

C-7


inches

.984

Load Ratings

Series 300 Table 4 • Radial load ratings in pounds at various RPM for appropriate L₁₀ life hours Shaft diameter, inches

Bearing size number

L₁₀ Min. life, hrs.

Radial load ratings, pounds Speed, RPM 50

100

200

300

400

500

600

700

800

900 1000 1200 1500 1800 2000 2500 3000 3500 4000

5000

.... .... .... 569

.... .... 567 453

.... 614 453 361

.... 536 394 316

675 486 361 286

628 453 336 267

589 428 316 251

558 405 300 239

536 389 286 229

514 372 276 220

497 358 267 212

469 339 251 200

436 316 233 186

408 297 220 175

397 289 213 170

369 267 197 158

347 251 186 149

330 239 177 141

316 229 170 136

294 212 158 126

.... 815 601 479

.... 712 523 419

897 645 479 379

834 601 445 354

782 567 419 333

741 538 397 316

712 516 379 303

682 493 366 291

660 475 353 281

623 449 332 265

579 419 309 246

542 394 291 231

527 382 282 225

490 353 261 209

460 332 246 196

438 317 234 187

419 303 224 179

380 281 208 166

. . . . 1170 1090 1020 935 848 789 745 687 628 585 550 550 497 464 436

974 706 521 414

935 677 497 397

896 648 480 381

867 623 463 368

818 589 436 347

760 550 405 323

711 516 382 303

692 502 369 294

643 463 342 273

604 436 322 257

575 415 306 244

550 398 294 234

511 368 272 217

967 696 515 410

898 650 478 381

³⁄₄

312

3000 8000 20000 40000

⁷⁄₈ ¹⁵⁄₁₆ 1

314 315 316

3000 8000 20000 40000

.... .... .... 756

.... .... 752 601

1¹⁄₈ 1³⁄₁₆

318 319

3000 8000 20000 40000

.... .... .... 994

.... .... . . . . 1070 989 789 789 628

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

320 322 323

3000 8000 20000 40000

. . . . . . . . 1390 1290 1210 1150 1100 1050 1020 . . . . . . . . 1260 1100 1001 932 881 834 800 765 737 . . . . 1160 932 811 742 690 650 616 587 567 547 1170 932 742 650 587 548 515 489 469 450 434

840 610 451 358

817 593 436 347

760 547 404 322

713 515 380 303

679 490 362 288

650 469 347 276

604 435 321 256

1¹⁄₂

324

3000 8000 20000 40000

. . . . . . . . . . . . . . . . 1690 1570 1470 1400 1340 1290 1240 1170 1090 1020 . . . . . . . . 1540 1340 1210 1130 1070 1010 974 932 897 847 791 742 . . . . 1420 1130 988 904 840 791 749 714 689 666 626 581 548 1430 1130 904 791 714 666 627 595 570 548 528 499 463 435

995 721 530 422

925 666 491 391

868 626 462 368

826 596 440 350

791 571 421 336

735 529 390 311

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

326 327 328

3000 8000 20000 40000

. . . . . . . . . . . . . . . . 2210 2050 1920 1820 1750 1680 1620 1530 1420 1330 1290 1200 1130 1070 1030 . . . . . . . . 2010 1750 1590 1480 1390 1320 1260 1210 1160 1100 1030 967 939 867 816 776 743 . . . . 1850 1480 1280 1170 1090 1030 976 930 898 867 816 757 714 690 639 601 572 548 1860 1480 1170 1030 930 868 817 774 742 713 687 649 602 566 549 509 479 455 436

1¹⁵⁄₁₆

331

3000 8000 20000 40000

. . . . . . . . . . . . . . . . 2580 2400 2250 2130 2040 1960 1890 1790 1660 1550 1510 1400 1320 1250 1200 . . . . . . . . 2340 2040 1850 1720 1630 1540 1480 1410 1360 1280 1200 1120 1090 1010 952 906 867 . . . . 2160 1720 1500 1370 1270 1200 1130 1080 1040 1010 952 883 833 805 745 702 667 640 2170 1720 1370 1200 1080 1010 953 904 866 832 802 757 703 660 641 594 558 530 509

2 2¹⁄₈ 2³⁄₁₆

332 334 335

3000 8000 20000 40000

. . . . . . . . . . . . . . . . 2990 2780 . . . . . . . . 2720 2370 2150 2000 . . . . 2510 2000 1740 1590 1480 2520 2000 1590 1390 1250 1170

2600 1890 1390 1100

2470 1790 1310 1040

2370 2270 2200 2070 1920 1800 1750 1620 1530 1450 1710 1640 1580 1490 1390 1300 1270 1170 1100 1040 1250 1210 1170 1100 1020 965 933 863 812 773 1003 964 929 877 813 764 742 687 646 614

2¹⁄₄ 2⁷⁄₁₆

336 339

3000 8000 20000 40000

. . . . . . . . . . . . . . . . 3400 3160 . . . . . . . . 3090 2690 2440 2270 . . . . 2850 2270 1970 1810 1680 2860 2270 1810 1580 1420 1330

2960 2140 1580 1250

2810 2030 1500 1180

2690 1950 1420 1140

2580 1860 1380 1090

2500 2360 2190 2050 1990 1850 1730 1790 1690 1580 1480 1440 1330 1250 1330 1250 1160 1090 1060 981 923 1050 996 924 868 843 781 734

2¹¹⁄₁₆ 2³⁄₄

343 344

3000 8000 20000 40000

. . . . . . . . . . . . . . . . 4340 4030 . . . . . . . . 3940 3440 3110 2900 . . . . 3640 2900 2520 2300 2140 3650 2900 2300 2020 1820 1700

3780 2740 2020 1600

3580 2590 1910 1510

3440 2480 1820 1450

3290 2380 1760 1390

3190 2290 1690 1340

3010 2160 1590 1270

2790 2020 1480 1170

2610 1890 1390 1100

2540 2360 1840 1690 1350 1250 1070 995

2¹⁵⁄₁₆

347

3000 8000 20000 40000

. . . . . . . . . . . . . . . . 4770 4440 . . . . . . . . 4340 3780 3430 3190 . . . . 4000 3190 2770 2530 2360 4020 3190 2530 2220 2000 1870

4160 3010 2220 1750

3940 2850 2100 1660

3780 2730 2000 1590

3620 2610 1930 1530

3510 2520 1860 1480

3310 2380 1750 1390

3070 2220 1630 1290

2870 2080 1530 1210

2790 2020 1480 1180

2590 1860 1370 1090

3 3³⁄₁₆

348 351

3000 8000 20000 40000

. . . . . . . . . . . . . . . . 5090 4730 . . . . . . . . 4620 4030 3650 3400 . . . . 4260 3400 2950 2700 2510 4280 3400 2700 2360 2130 1990

4430 3210 2360 1870

4200 3040 2240 1770

4030 2910 2130 1700

3860 2790 2060 1630

3740 2680 1990 1570

3520 2530 1870 1480

3270 2360 1730 1380

3060 2220 1630 1290

2980 2150 1580 1250

2760 1990 1460 1160

3⁷⁄₁₆ 3¹⁄₂

355 356

3000 8000 20000 40000

. . . . . . . . . . . . . . . . 5930 5510 . . . . . . . . 5390 4700 4260 3960 . . . . 4970 3960 3440 3150 2930 4990 3960 3150 2760 2490 2320

5170 3740 2760 2180

4900 3540 2610 2070

4700 3400 2490 1980

4500 3250 2400 1900

4350 3120 2320 1830

4110 2950 2180 1730

3810 2760 2020 1600

3570 2580 1900 1510

3470 2510 1840 1460

3¹⁵⁄₁₆

363

3000 8000 20000 40000

. . . . . . . . . . . . . . . . 7230 6720 . . . . . . . . 6570 5730 5190 4830 . . . . 6060 4830 4200 3840 3570 6090 4830 3840 3360 3030 2830

6300 4560 3360 2660

5970 4320 3180 2520

5730 4140 3030 2420

5490 3960 2930 2320

5310 3810 2820 2240

5010 3600 2660 2110

4650 3360 2460 1960

4350 3150 2320 1840

4230 3060 2240 1780

Operation in the high speed shaded areas requires frequent relubrication. If the load P is greater than .25C, Consult Link-Belt Bearing Division, Rexnord Corp.

C-8

Heavy Duty Ball Bearing Pillow Blocks

P-U300, PE-U300 Cast Iron Housing Standard Backing Height Fixed or Expansion Alignable Spring Locking Collar Relubricatable

Fixed

Expansion

Dimensions (inches/mm) Pillow block A Shaft number g diameter + .000" – .010" inches Fixed Expansion + 0.00 – 0.25 mm

B

C

D

L

E l

F Bolts

H

1³⁄₄ 44.4

¹⁄₂ 12

¹³⁄₁₆ 20.6

3¹⁄₁₆ 77.8

Total W Unit wt. Bearing axial X expansion (lbs./kg.) no.

M

S

U

3³⁄₁₆ 81.0

1⁵⁄₈ 41.3

⁷⁄₈ 22.2

²⁷⁄₃₂ 21.4

1³⁄₆₄ 26.6

³⁄₁₆ 4.8

3.0 1.4

UG312L

Fixed Expansion

³⁄₄

P-U312

PE-U312

1⁵⁄₈ 41.28

5 6¹⁄₂ 1¹⁵⁄₃₂ 127.0 165.1 37.31

⁷⁄₈ ¹⁵⁄₁₆ 1

P-U314 P-U315 P-U316

PE-U314 PE-U315 PE-U316

1⁷⁄₈ 47.62

5¹⁄₂ 7 139.7 177.8

1⁴³⁄₆₄ 2 42.46 50.8

¹⁄₂ 12

⁷⁄₈ 22.2

3⁹⁄₁₆ 90.5

3²³⁄₃₂ 94.4

2 50.8

⁷⁄₈ 22.2

⁶³⁄₆₄ 25.0

1¹⁵⁄₆₄ 31.4

³⁄₁₆ 4.8

4.0 1.8

UG314L UG315L UG316L

1¹⁄₈ 1³⁄₁₆

P-U318 P-U319

PE-U318 PE-U319

2¹⁄₈ 53.98

6⁷⁄₁₆ 8¹⁄₄ 1⁵⁹⁄₆₄ 2¹⁄₄ 163.5 209.6 48.82 57.2

¹⁄₂ 12

¹⁵⁄₁₆ 23.8

4¹⁄₁₆ 103.2

4¹⁄₄ 108.0

2⁵⁄₁₆ 58.7

1¹⁄₁₆ 27.0

1⁹⁄₆₄ 29.0

1¹³⁄₃₂ 35.7

³⁄₁₆ 4.8

5.9 2.7

UG318L UG319L

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

P-U320 P-U322 P-U323

PE-U320 PE-U322 PE-U323

2³⁄₈ 60.32

7³⁄₈ 9¹⁄₄ 2³⁄₃₂ 2³⁄₈ 187.3 235.0 53.18 60.3

⁵⁄₈ 16

1 25.4

4¹⁄₂ 114.3

4¹¹⁄₁₆ 119.1

2⁹⁄₁₆ 65.1

1¹⁄₈ 28.6

1¹⁄₄ 31.8

1¹⁄₂ 38.1

³⁄₁₆ 4.8

7.5 3.4


1¹⁄₂

P-U324

PE-U324

2⁵⁄₈ 66.68

8 10¹⁄₈ 2⁵⁄₁₆ 2⁵⁄₈ 203.2 257.2 58.74 66.7

⁵⁄₈ 16

1¹⁄₄ 31.8

5 127.0

5⁷⁄₃₂ 132.6

3¹⁄₁₆ 77.8

1¹⁄₄ 31.8

1²⁵⁄₆₄ 35.3

1³⁹⁄₆₄ 40.9

³⁄₁₆ 4.8

11.5 5.2

UG324L

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

P-U326 P-U327 P-U328

PE-U326 PE-U327 PE-U328

2⁷⁄₈ 73.02

8¹⁄₄ 10¹⁄₄ 2¹⁹⁄₃₂ 3 209.6 260.4 65.88 76.2

⁵⁄₈ 16

1⁵⁄₁₆ 33.3

5¹⁄₂ 139.7

5⁵⁄₈ 142.9

3¹⁄₄ 82.6

1¹⁄₈ 28.6

1³⁵⁄₆₄ 39.3

1²⁷⁄₃₂ 46.8

³⁄₁₆ 4.8

13.0 5.9


1¹⁵⁄₁₆

P-U331

PE-U331

3¹⁄₈ 79.38

8⁷⁄₈ 11¹⁄₈ 2¹³⁄₁₆ 3¹⁄₈ 225.4 282.6 71.44 79.4

⁵⁄₈ 16

1³⁄₈ 34.9

6 152.4

6⁷⁄₃₂ 158.0

3⁷⁄₁₆ 87.3

1¹⁄₈ 28.6

1⁴³⁄₆₄ 42.5

1³¹⁄₃₂ 50.0

³⁄₁₆ 4.8

17.2 7.8

UG331L

2 2¹⁄₈ 2³⁄₁₆

P-U332 P-U334 P-U335

PE-U332 PE-U334 PE-U335

3¹⁄₂ 88.90

10¹⁄₄ 12⁵⁄₈ 3¹⁄₁₆ 3³⁄₈ 260.4 320.7 77.79 85.7

³⁄₄ 20

1¹⁄₂ 38.1

6⁵⁄₈ 168.3

6¹³⁄₁₆ 173.0

3¹⁵⁄₁₆ 1¹⁄₄ 100.0 31.8

1²⁷⁄₃₂ 46.8

2³⁄₁₆ 55.6

³⁄₁₆ 4.8

21.5 9.8


2¹⁄₄ 2⁷⁄₁₆

P-U336 P-U339

PE-U336 PE-U339

3⁵⁄₈ 92.08

11¹⁄₄ 13³⁄₄ 3⁵⁄₁₆ 3¹⁄₂ 285.8 349.2 84.14 88.9

³⁄₄ 20

1⁵⁄₈ 41.3

7¹⁄₈ 181.0

7³⁄₁₆ 182.6

4³⁄₁₆ 1³⁄₈ 106.4 34.9

1¹⁵⁄₁₆ 49.2

2⁷⁄₁₆ 61.9

³⁄₁₆ 4.8

27.5 12.5

UG336L UG339L

2¹¹⁄₁₆ 2³⁄₄

P-U343 P-U344

PE-U343 PE-U344

4 101.60

11¹³⁄₁₆ 14⁵⁄₈ 3¹³⁄₁₆ 3³⁄₄ 300.0 371.5 96.84 95.2

⁷⁄₈ 24

1⁵⁄₈ 41.3

7³⁄₄ 196.8

7¹⁵⁄₁₆ 201.6

4³⁄₄ 1⁵⁄₈ 120.6 41.3

2¹⁄₄ 57.2

2⁵⁄₈ 66.7

¹⁄₄ 6.4

39.0 17.7

UG343L UG344L

2¹⁵⁄₁₆

P-U347

PE-U347

4¹⁄₄ 107.95

12 15¹⁄₈ 4³⁄₃₂ 4 ⁷⁄₈ 304.8 384.2 103.98 101.6 24

1³⁄₄ 44.4

8³⁄₈ 212.7

8³⁄₈ 212.7

4¹⁵⁄₁₆ 1⁵⁄₈ 125.4 41.3

2³⁄₈ 60.3

2³⁄₄ 69.8

¹⁄₄ 6.4

44.5 20.2

UG347L

3 3³⁄₁₆

P-U348 P-U351

PE-U348 PE-U351

4⁹⁄₁₆ 115.89

12¹⁄₄ 15³⁄₈ 4¹³⁄₃₂ 4⁵⁄₁₆ ⁷⁄₈ 311.2 390.5 111.92 105.6 24

1¹⁵⁄₁₆ 49.2

9 228.6

9 228.6

5¹¹⁄₁₆ 1⁵⁄₈ 144.5 41.3

2¹⁹⁄₃₂ 65.9

3 76.2

³⁄₈ 9.5

53.0 24.0

UG348L UG351L

3⁷⁄₁₆ 3¹⁄₂

P-U355 P-U356

PE-U355 PE-U356

5¹⁄₈ 130.18

12⁷⁄₈ 16¹⁄₈ 4¹⁵⁄₁₆ 5 1 327.0 409.6 125.41 127.0 24

2¹⁄₄ 57.2

9⁷⁄₈ 250.8

10¹⁄₁₆ 255.6

6 1⁵⁄₈ 152.4 41.3

2²⁹⁄₃₂ 73.8

3⁹⁄₃₂ 83.3

³⁄₈ 9.5

70.0 31.8

UG355L UG356L

3¹⁵⁄₁₆

P-U363

PE-U363

5¹¹⁄₁₆ 144.46

14¹⁄₂ 17⁵⁄₁₆ 5⁹⁄₁₆ 5 1 368.3 439.7 141.29 127.0 24

2⁹⁄₁₆ 65.1

11¹⁄₁₆ 281.0

11¹⁄₁₆ 281.0

7 1¹⁄₂ 177.8 38.1

3⁹⁄₃₂ 83.3

3¹¹⁄₁₆ 93.7

³⁄₈ 9.5

98.0 44.4

UG363L

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for all expansion units with 2⁷⁄₁₆" and smaller shafts, ¹⁄₄"-28 UNF; for other expansion units and all fixed units, ¹⁄₈" PT. g 1¹⁄₈ thru 2¹⁵⁄₁₆ shaft diameters also available with dual lip seals, add suffix N; i.e. P-U319N X Width dimension for closed end unit. l Dimension E for PE-U326 thru PE-U328 is 2³⁄₄", PE-U336 and PE-U339 is 3³⁄₄". Selection guide, pages C-5, C-6. Load ratings, pages C-7, C-8. Additional information, page C-17.

C-9

Heavy Duty Ball Bearing Pillow Blocks

P2-U300 Cast Iron Housing High Backing Height Alignable Spring Locking Collar Relubricatable


A Pillow block number g

+ .000" – .010" + 0.00 – 0.25 mm

B

C

D

E

F Bolts

H

L

M

S

U

W X

Unit wt. (lbs./kg.)

Bearing no.

⁷⁄₈ ␣ ¹⁵⁄₁₆ 1

P2-U314 P2-U315 P2-U316

2 50.80

5¹⁄₂ 139.7

7 177.8

1⁴³⁄₆₄ 42.46

2 50.8

¹⁄₂ 12

⁷⁄₈ 22.2

3¹¹⁄₁₆ 93.7

2 50.8

⁷⁄₈ 22.2

⁶³⁄₆₄ 25.0

1¹⁵⁄₆₄ 31.4

4.2 1.9


1¹⁄₈ 1³⁄₁₆

P2-U318 P2-U319

2³⁄₈ 60.32

6⁵⁄₈ 168.3

8¹⁄₄ 209.6

1⁵⁹⁄₆₄ 48.82

2³⁄₈ 60.3

¹⁄₂ 12

⁷⁄₈ 22.2

4⁵⁄₁₆ 109.5

2⁵⁄₁₆ 58.7

1 25.4

1⁹⁄₆₄ 29.0

1¹³⁄₃₂ 35.7

6.5 2.9

UG318L UG319L

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

P2-U320 P2-U322 P2-U323

2³⁄₄ 69.85

8¹⁄₄ 209.6

10¹⁄₈ 257.2

2³⁄₃₂ 53.18

2³⁄₄ 69.8

⁵⁄₈ 16

¹⁵⁄₁₆ 23.8

4⁷⁄₈ 123.8

2⁹⁄₁₆ 65.1

1¹⁄₈ 28.6

1¹⁄₄ 31.8

1¹⁄₂ 38.1

8.9 4.0


1¹⁄₂

P-U324(

2⁵⁄₈ 66.68

8 203.2

10¹⁄₈ 257.2

2⁵⁄₁₆ 58.74

2⁵⁄₈ 66.7

⁵⁄₈ 16

1¹⁄₄ 31.8

5 127.0

3¹⁄₁₆ 77.8

1¹⁄₄ 31.8

1²⁵⁄₆₄ 35.3

1³⁹⁄₆₄ 40.9

11.5 5.2

UG324L

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

P2-U326 P2-U327 P2-U328

3¹⁄₈ 79.38

9 228.6

11 279.4

2¹⁹⁄₃₂ 65.88

3 76.2

⁵⁄₈ 16

1³⁄₁₆ 30.2

5³⁄₄ 146.0

3¹⁄₄ 82.6

1¹⁄₈ 28.6

1³⁵⁄₆₄ 39.3

1²⁷⁄₃₂ 46.8

14.0 6.4


1¹⁵⁄₁₆

P-U331(

3¹⁄₈ 79.38

8⁷⁄₈ 225.4

11¹⁄₈ 282.6

2¹³⁄₁₆ 71.44

3¹⁄₈ 79.4

⁵⁄₈ 16

1³⁄₈ 34.9

6 152.4

3⁷⁄₁₆ 87.3

1¹⁄₈ 28.6

1⁴³⁄₆₄ 42.5

1³¹⁄₃₂ 50.0

17.2 7.8

UG331L

2 2¹⁄₈ 2³⁄₁₆

P2-U332 P2-U334 P2-U335

3³⁄₄ 95.25

10¹⁄₄ 260.4

12⁵⁄₈ 320.7

3¹⁄₁₆ 77.79

3³⁄₈ 85.7

³⁄₄ 20

1⁷⁄₁₆ 36.5

6⁷⁄₈ 174.6

3¹⁵⁄₁₆ 100.0

1³⁄₈ 34.9

1²⁷⁄₃₂ 46.8

2³⁄₁₆ 55.6

UG332L 22.9 UG334L 10.4 UG335L

2¹⁄₄ 2⁷⁄₁₆

P2-U336 P2-U339

4¹⁄₈ 104.78

11¹⁄₄ 285.8

13³⁄₄ 349.2

3⁵⁄₁₆ 84.14

4 101.6

³⁄₄ 20

1¹⁄₂ 38.1

7¹⁄₂ 190.5

4³⁄₁₆ 106.4

1³⁄₈ 34.9

1¹⁵⁄₁₆ 49.2

2⁷⁄₁₆ 61.9

31.1 UG336L 14.1 UG339L

2¹¹⁄₁₆ 2³⁄₄

P2-U343 P2-U344

4⁹⁄₁₆ 115.89

12 304.8

14¹³⁄₁₆ 376.2

3¹³⁄₁₆ 96.84

4³⁄₈ 111.1

⁷⁄₈ 24

1³⁄₄ 44.4

8⁷⁄₁₆ 214.3

4³⁄₄ 120.6

1³⁄₈ 34.9

2¹⁄₄ 57.2

2⁵⁄₈ 66.7

44.0 UG343L 20.0 UG344L

2¹⁵⁄₁₆

P2-U347

4⁹⁄₁₆ 115.89

12³⁄₈ 314.3

15³⁄₈ 390.5

4³⁄₃₂ 4³⁄₈ 103.98 111.1

⁷⁄₈ 24

1⁷⁄₈ 47.6

8¹¹⁄₁₆ 220.7

4¹⁵⁄₁₆ 125.4

1³⁄₈ 34.9

2³⁄₈ 60.3

2³⁄₄ 69.8

47.2 UG347L 21.4

3 3³⁄₁₆

P-U348( P-U351(

4⁹⁄₁₆ 115.89

12¹⁄₄ 311.2

15³⁄₈ 390.5

4¹³⁄₃₂ 4⁵⁄₁₆ 111.92 105.6

⁷⁄₈ 24

1¹⁵⁄₁₆ 49.2

9 228.6

5¹¹⁄₁₆ 144.5

1⁵⁄₈ 41.3

2¹⁹⁄₃₂ 65.9

3 76.2

53.0 UG348L 24.0 UG351L

3⁷⁄₁₆

P-U355(

5¹⁄₈ 130.18

12⁷⁄₈ 327.0

16¹⁄₈ 409.6

4¹⁵⁄₁₆ 5 125.41 127.0

1 24

2¹⁄₄ 57.2

9⁷⁄₈ 250.8

6 152.4

1⁵⁄₈ 41.3

2²⁹⁄₃₂ 73.8

3⁹⁄₃₂ 83.3

70.0 UG355L 31.8

3¹⁵⁄₁₆

P-U363(

5¹¹⁄₁₆ 144.46

14¹⁄₂ 368.3

17⁵⁄₁₆ 439.7

5⁹⁄₁₆ 5¹⁄₂ 141.29 139.7

1 24

2⁹⁄₁₆ 65.1

11¹|₁₆ 281.0

7 177.8

1¹⁄₂ 38.1

3⁹⁄₃₂ 83.3

3¹¹⁄₁₆ 93.7

98.0 UG363L 44.4

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: ¹⁄₈" PT. ( Same as P-U300 series. g 1¹⁄₈ thru 2¹⁵⁄₁₆ shaft diameters also available with dual lip seals, add suffix N; i.e. P-U319N X Width dimension for closed end unit. Selection guide, pages C-5, C-6. Load ratings, pages C-7, C-8. Additional information, page C-17.

C-10

Heavy Duty Ball Bearing Flanged Units

F-U300, FE-U300 Cast Iron Housing 4-bolt Mounting Fixed or Expansion Alignable Spring Locking Collar Relubricatable

Fixed

Expansion

Dimensions (inches/mm) Shaft diameter Inches

A

Flanged unit number g

Fixed Expansion

B

D

Total Unit wt. axial expansion (lbs./kg.)

E

F Bolts

G

H

J X

L

M

N

P

Bearing no.

3⁷⁄₈ 98.4

⁷⁄₁₆ 10

¹|₈ 3.2

¹|₂ 12.7

1⁵¹⁄₆₄ 45.6

1¹⁹⁄₃₂ 40.5

1⁵⁄₈ 41.3

5¹⁄₁₆ 128.6

¹⁵⁄₆₄ 6.0

... ...

2.5 1.1

UG312L

Fixed

Expansion

³⁄₄

F-U312

...

2³⁄₄ 69.8

3¹⁄₁₆ 77.8

⁷⁄₈ ¹⁵⁄₁₆ 1

F-U314 F-U315 F-U316

FE-U314 FE-U315 FE-U316

3¹⁄₄ 82.6

3¹¹⁄₁₆ 3¹⁄₂ 1⁴³⁄₆₄ 93.7 88.90 42.46

4⁵⁄₈ 117.5

¹⁄₂ 12

¹⁄₈ 3.2

⁹⁄₁₆ 14.3

2³⁄₆₄ 52.0

1⁵¹⁄₆₄ 45.6

2 50.8

6¹⁄₁₆ 154.0

¹⁹⁄₆₄ 7.5

³⁄₁₆ 4.8

4.0 1.8


1¹⁄₈ 1³⁄₁₆

F-U318 F-U319

FE-U318 FE-U319

3⁵⁄₈ 92.1

4¹⁄₈ 3¹³⁄₁₆ 1⁵⁹⁄₆₄ 104.8 96.84 48.82

4¹⁵⁄₁₆ 125.4

¹⁄₂ 12

¹⁄₈ 3.2

⁵⁄₈ 15.9

2⁵⁄₁₆ 58.7

2³⁄₆₄ 52.0

2⁵⁄₁₆ 58.7

6¹⁷⁄₃₂ 165.9

²⁵⁄₆₄ 9.9

³⁄₁₆ 4.8

4.7 2.1

UG318L UG319L

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

F-U320 F-U322 F-U323

FE-U320 FE-U322 FE-U323

4¹⁄₁₆ 4¹⁵⁄₃₂ 4 2³⁄₃₂ 103.2 113.5 101.60 53.18

5¹⁄₈ 130.2

¹⁄₂ 12

⁵⁄₃₂ 4.0

⁵⁄₈ 15.9

2¹⁄₂ 63.5

2¹⁄₄ 57.2

2⁹⁄₁₆ 65.1

6²⁵⁄₃₂ 172.2

⁷⁄₁₆ 11.1

⁹⁄₃₂ 7.1

6.0 2.7


1¹⁄₂

F-U324

FE-U324

4⁹⁄₁₆ 5 4⁵⁄₈ 2⁵⁄₁₆ 115.9 127.0 117.48 58.74

6 152.4

⁵⁄₈ 16

⁵⁄₃₂ 4.0

⁵⁄₈ 15.9

2¹¹⁄₁₆ 68.3

2¹⁵⁄₃₂ 62.7

3¹⁄₁₆ 77.8

7²⁹⁄₃₂ 200.8

¹⁄₂ 12.7

⁹⁄₃₂ 7.1

8.5 3.8

UG324L

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

F-U326 F-U327 F-U328

FE-U326 FE-U327 FE-U328

5 5¹⁄₂ 4⁷⁄₈ 2¹⁹⁄₃₂ 127.0 139.7 123.82 65.88

6¹⁄₄ 158.8

⁵⁄₈ 16

⁵⁄₃₂ 4.0

¹¹⁄₁₆ 17.5

3³⁄₆₄ 77.4

2³⁄₄ 69.8

3¹⁄₄ 82.6

8⁹⁄₃₂ 210.3

³⁵⁄₆₄ 13.9

³⁄₁₆ 4.8

10.2 4.6


1¹⁵⁄₁₆

F-U331

FE-U331

5¹⁄₂ 5¹⁵⁄₁₆ 5¹⁄₈ 2¹³⁄₁₆ 139.7 150.8 130.18 71.44

6¹⁄₂ 165.1

⁵⁄₈ 16

⁵⁄₃₂ 4.0

¹¹⁄₁₆ 17.5

3¹⁷⁄₆₄ 82.9

2³¹⁄₃₂ 75.4

3⁷⁄₁₆ 87.3

8⁵⁄₈ 219.1

³⁷⁄₆₄ 14.7

³⁄₁₆ 4.8

12.2 5.5

UG331L

2 2¹⁄₈ 2³⁄₁₆

F-U332 F-U334 F-U335

FE-U332 FE-U334 FE-U335

6 6³⁄₈ 5³⁄₄ 3¹⁄₁₆ 152.4 161.9 146.05 77.79

7⁵⁄₁₆ 185.7

³⁄₄ 20

⁵⁄₃₂ 4.0

³⁄₄ 19.0

3⁹⁄₁₆ 90.5

3⁷⁄₃₂ 81.8

3¹⁵⁄₁₆ 9¹¹⁄₁₆ 100.0 246.1

²¹⁄₃₂ 16.7

³⁄₁₆ 4.8

16.5 7.5


2¹⁄₄ 2⁷⁄₁₆

F-U336 F-U339

FE-U336 FE-U339

6³⁄₈ 6¹³⁄₁₆ 6 3⁵⁄₁₆ 161.9 173.0 152.40 84.14

7⁵⁄₈ 193.7

³⁄₄ 20

⁵⁄₃₂ 4.0

³⁄₄ 19.0

3³¹⁄₃₂ 3¹⁵⁄₃₂ 100.8 88.1

4³⁄₁₆ 10¹⁄₈ 106.4 257.2

²¹⁄₃₂ 16.7

³⁄₁₆ 4.8

19.2 8.7

UG336L UG339L

2¹¹⁄₁₆ 2³⁄₄

F-U343 F-U344

FE-U343 FE-U344

7⁵⁄₁₆ 7³⁄₄ 7 3¹³⁄₁₆ 185.7 196.8 177.80 96.84

8⁷⁄₈ 225.4

⁷⁄₈ 24

⁵⁄₃₂ 4.0

⁷⁄₈ 22.2

4¹¹⁄₃₂ 3³¹⁄₃₂ 4³⁄₄ 11²⁵⁄₃₂ 110.3 100.8 120.6 299.2

³⁄₄ 19.0

¹⁄₄ 6.4

30.0 13.6

UG343L UG344L

2¹⁵⁄₁₆

F-U347

FE-U347

7⁷⁄₈ 8¹⁄₄ 7¹⁄₄ 4³⁄₃₂ 9¹⁄₁₆ 200.0 209.6 184.15 103.98 230.2

⁷⁄₈ 24

⁷⁄₃₂ 5.6

⁷⁄₈ 22.2

4¹¹⁄₁₆ 4⁵⁄₁₆ 4¹⁵⁄₁₆ 12¹⁄₁₆ 119.1 109.5 125.4 306.4

⁷⁄₈ 22.2

¹⁄₄ 6.4

33.5 15.2

UG347L

3⁷⁄₁₆ 3¹⁄₂

F-U355 F-U356

FE-U355 FE-U356

9¹⁄₄ 9⁷⁄₈ 8¹⁄₂ 4¹⁵⁄₁₆ 11 235.0 250.8 215.90 125.41 279.4

1 24

⁷⁄₃₂ 5.6

1¹⁄₄ 31.8

5¹⁷⁄₃₂ 5⁵⁄₃₂ 6 14¹⁷⁄₃₂ 140.5 131.0 152.4 369.1

1 25.4

³⁄₈ 9.5

58.0 26.3

UG355L UG356L

3¹⁵⁄₁₆

F-U363

FE-U363

10³⁄₈ 10¹⁵⁄₁₆ 9¹⁄₂ 5⁹⁄₁₆ 12¹⁄₈ 263.5 277.8 241.30 141.29 308.0

1¹⁄₈ 30

⁷⁄₃₂ 5.6

1³⁄₈ 34.9

6³⁄₁₆ 5²⁵⁄₃₂ 7 16¹⁄₁₆ 157.2 146.8 177.8 408.0

1³⁄₃₂ 27.8

³⁄₈ 9.5

78.0 35.4

UG363L

2⁷⁄₈ 1¹⁵⁄₃₂ 73.02 37.31

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for all expansion units with 2⁷⁄₁₆" and smaller shafts, ¹⁄₄"-28 UNF; for other expansion units and all fixed units, ¹⁄₈" PT. g 1¹⁄₈ thru 2¹⁵⁄₁₆ shaft diameters also available with dual lip seals, add suffix N; i.e. P-U319N X Width dimension for closed end unit. Selection guide, pages C-5, C-6. Load ratings, pages C-7, C-8. Additional information, page C-17.

C-11

Heavy Duty Ball Bearing Flanged Cartridge Units

FC-U300, FCE-U300 Cast Iron Housing Fixed or Expansion Alignable Spring Locking Collar Relubricatable

Fixed

Expansion


Flanged cartridge unit number g Fixed

A †

B

C

D

F Bolts

H

J

K

L

M

P

U

Y X

Expansion

Total Unit wt. Bearing axial (lbs./kg.) no. expansion

³⁄₄

FC-U312

...

3.125 79.38

3³⁄₄ 95.25

4¹⁄₂ 1¹⁵⁄₃₂ 114.3 37.31

⁵⁄₁₆ 8

⁷⁄₁₆ 11.1

¹³⁄₁₆ 20.6

1⁷⁄₃₂ 31.0

²¹⁄₃₂ 16.7

1⁵⁄₈ 41.3

¹³⁄₆₄ 5.2

¹⁄₂ 12.7

⁵⁵⁄₆₄ 21.8

... ...

3.0 1.4

UG312L

⁷⁄₈ ¹⁵⁄₁₆ 1

FC-U314 FC-U315 FC-U316

... ... ...

3.688 93.68

4¹⁄₂ 5³⁄₈ 1⁴³⁄₆₄ 114.30 136.5 42.46

³⁄₈ 10

⁷⁄₁₆ 11.1

⁷⁄₈ 22.2

1⁵⁄₁₆ 33.3

⁵¹⁄₆₄ 20.2

2 50.8

¹⁹⁄₆₄ 7.5

⁵⁄₈ 15.9

1³⁄₆₄ 26.6

... ...

4.5 2.0


1¹⁄₈ 1³⁄₁₆

FC-U318 FC-U319

... ...

4.125 5 6 1⁵⁹⁄₆₄ 104.78 127.00 152.4 48.82

⁷⁄₁₆ 10

⁷⁄₁₆ 11.1

³¹⁄₃₂ 24.6

1⁷⁄₁₆ 36.5

⁶¹⁄₆₄ 24.2

2⁵⁄₁₆ 58.7

²⁵⁄₆₄ 9.9

⁵⁄₈ 15.9

1⁷⁄₃₂ 31.0

... ...

6.0 2.7

UG318L UG319L

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

FC-U320 FC-U322 FC-U323

FCE-U320 FCE-U322 FCE-U323

4.500 5³⁄₈ 6³⁄₈ 2³⁄₃₂ 114.30 136.52 161.9 53.18

⁷⁄₁₆ 10

⁷⁄₁₆ 11.1

1³⁄₃₂ 27.8

1⁹⁄₁₆ 39.7

1 25.4

2⁹⁄₁₆ 65.1

⁷⁄₁₆ 11.1

⁵⁄₈ 15.9

1¹⁄₄ 31.8

¹⁄₄ 6.4

7.5 3.4


1¹⁄₂

FC-U324

FCE-U324

5.000 6 7¹⁄₈ 2⁵⁄₁₆ 127.00 152.40 181.0 58.74

¹⁄₂ 12

¹⁄₂ 12.7

1¹¹⁄₆₄ 29.8

1²³⁄₃₂ 43.6

1⁹⁄₆₄ 29.0

3¹⁄₁₆ 77.8

¹⁄₂ 12.7

⁵⁄₈ 15.9

1²³⁄₆₄ 34.5

¹⁄₄ 6.4

10.0 4.5

UG324L

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

FC-U326 FC-U327 FC-U328


5.500 6¹⁄₂ 7⁵⁄₈ 2¹⁹⁄₃₂ 139.70 165.10 193.7 65.88

¹⁄₂ 12

¹⁄₂ 12.7

1¹⁹⁄₆₄ 32.9

1⁵⁹⁄₆₄ 48.8

1¹⁹⁄₆₄ 32.9

3¹⁄₄ 82.6

³⁵⁄₆₄ 13.9

³⁄₄ 19.0

1¹⁹⁄₃₂ 40.5

¹⁄₄ 6.4

12.2 5.5


1¹⁵⁄₁₆

FC-U331

FCE-U331

6.000 7 8¹⁄₈ 2¹³⁄₁₆ 152.40 177.80 206.4 71.44

¹⁄₂ 12

⁹⁄₁₆ 14.3

1²⁵⁄₆₄ 35.3

2¹⁄₈ 54.0

1²⁷⁄₆₄ 36.1

3⁷⁄₁₆ 87.3

⁹⁄₁₆ 14.3

⁷⁄₈ 22.2

1²³⁄₃₂ 43.6

¹⁄₄ 6.4

15.0 6.8

UG331L

2 2¹⁄₈ 2³⁄₁₆

FC-U332 FC-U334 FC-U335


6.375 7⁵⁄₈ 9 3¹⁄₁₆ 161.92 193.68 228.6 77.79

⁵⁄₈ 16

⁵⁄₈ 15.9

1¹⁷⁄₃₂ 38.9

2⁹⁄₃₂ 57.9

1¹⁷⁄₃₂ 38.9

3¹⁵⁄₁₆ 100.0

²¹⁄₃₂ 16.7

¹⁵⁄₁₆ 23.8

1⁷⁄₈ 47.6

¹⁄₄ 6.4

19.5 8.8


2¹⁄₄ 2⁷⁄₁₆

FC-U336 FC-U339

FCE-U336 FCE-U339

6.875 8¹⁄₈ 9¹⁄₂ 3⁵⁄₁₆ 174.62 206.38 241.3 84.14

⁵⁄₈ 16

⁵⁄₈ 15.9

1¹¹⁄₁₆ 42.9

2¹⁵⁄₃₂ 62.7

1⁵⁄₈ 41.3

4³⁄₁₆ 106.4

²¹⁄₃₂ 16.7

¹⁵⁄₁₆ 23.8

2¹⁄₈ 54.0

¹⁄₄ 6.4

23.5 10.6

UG336L UG339L

2¹¹⁄₁₆ 2³⁄₄

FC-U343 FC-U344

FCE-U343 FCE-U344

7.750 9 10³⁄₈ 3¹³⁄₁₆ 196.85 228.60 263.5 96.84

⁵⁄₈ 16

³⁄₄ 19.0

1¹⁵⁄₁₆ 49.2

2²⁷⁄₃₂ 72.2

1⁷⁄₈ 47.6

4³⁄₄ 120.6

²⁵⁄₃₂ 19.8

1¹⁄₈ 28.6

2¹⁄₄ 57.2

¹³⁄₃₂ 10.3

32.5 14.7

UG343L UG344L

2¹⁵⁄₁₆

FC-U347

FCE-U347

8.250 9¹⁄₂ 10⁷⁄₈ 4³⁄₃₂ 209.55 241.30 276.2 103.98

⁵⁄₈ 16

³⁄₄ 19.0

2³⁄₃₂ 53.2

3¹⁄₈ 79.4

2 50.8

4¹⁵⁄₁₆ 125.4

³⁄₄ 19.0

1¹⁄₈ 28.6

2³⁄₈ 60.3

¹³⁄₃₂ 10.3

37.0 16.8

UG347L

3⁷⁄₁₆ 3¹⁄₂

FC-U355 FC-U356

FCE-U355 FCE-U356

9.875 11³⁄₈ 12⁷⁄₈ 4¹⁵⁄₁₆ 250.82 288.92 327.0 125.41

³⁄₄ 20

⁷⁄₈ 22.2

2¹⁷⁄₃₂ 64.3

3¹¹⁄₁₆ 93.7

2¹³⁄₃₂ 61.1

6 152.4

1 25.4

1¹⁄₄ 31.8

2²⁵⁄₃₂ 70.6

¹³⁄₃₂ 10.3

64.0 29.0

UG355L UG356L

3¹⁵⁄₁₆

FC-U363

FCE-U363

11.000 12¹⁄₂ 14 5⁹⁄₁₆ 279.40 317.50 355.6 141.29

³⁄₄ 20

⁷⁄₈ 22.2

2²⁵⁄₃₂ 70.6

4⁷⁄₃₂ 2²⁵⁄₃₂ 107.2 70.6

7 177.8

1³⁄₃₂ 27.8

1³⁄₈ 34.9

3³⁄₁₆ 81.0

¹³⁄₃₂ 10.3

85.0 38.6

UG363L

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size for 1³⁄₁₆" and smaller shaft sizes, ¹⁄₄"-28; all other shafts, ¹⁄₈" PT. † Tolerance: +.000" –.002" (+0.00 –0.05 mm). Bore tolerance for mounting: +.002" –.000" (+0.05 –0.00 mm). g 1¹⁄₈ thru 2¹⁵⁄₁₆ shaft diameters also available with dual lip seals, add suffix N; i.e. P-U319N X Width dimension for closed end unit. Selection guide, pages C-5, C-6. Load ratings, pages C-7, C-8. Additional information, page C-17.

C-12

Heavy Duty Ball Bearing Cartridge Units

C-U300, CE-U300 Steel Housing Fixed or Expansion Alignable Spring Locking Collar Relubricatable

Fixed

Expansion

Dimensions (inches/mm) Cartridge unit number g

Shaft diameter inches

Fixed

Expansion

³⁄₄

C-U312

⁷⁄₈ ¹⁵⁄₁₆ 1

A †

B

CE-U312

2.469 62.71

1⁵⁄₃₂ 29.37

C-U314 C-U315 C-U316

CE-U314 CE-U315 CE-U316

3.000 76.20

1¹⁄₈ 1³⁄₁₆

C-U318 C-U319

CE-U318 CE-U319

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

C-U320 C-U322 C-U323

1¹⁄₂

D

M

U

W X

Y

1¹⁵⁄₃₂ 37.31

1⁵⁄₈ 41.3

²⁷⁄₃₂ 21.4

1³⁄₆₄ 26.6

³⁄₈ 9.5

1¹⁄₄ 31.75

1⁴³⁄₆₄ 42.46

2 50.8

⁶³⁄₆₄ 25.0

1¹⁵⁄₆₄ 31.4

3.438 87.32

1³⁄₈ 34.92

1⁵⁹⁄₆₄ 48.82

2⁵⁄₁₆ 58.7

1⁹⁄₆₄ 29.0

CE-U320 CE-U322 CE-U323

3.750 95.25

1¹⁄₂ 38.10

2³⁄₃₂ 53.18

2⁹⁄₁₆ 65.1

C-U324

CE-U324

4.188 106.38

1²¹⁄₃₂ 42.07

2⁵⁄₁₆ 58.74

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

C-U326 C-U327 C-U328

CE-U326 CE-U327 CE-U328

4.594 116.69

1²⁷⁄₃₂ 46.83

1¹⁵⁄₁₆

C-U331

CE-U331

5.000 127.00

2 2¹⁄₈ 2³⁄₁₆

C-U332 C-U334 C-U335

CE-U332 CE-U334 CE-U335

2¹⁄₄ 2⁷⁄₁₆

C-U336 C-U339

2¹¹⁄₁₆ 2³⁄₄

Total axial expansion

Unit wt. (lbs./kg.)

Bearing no.

³⁄₁₆ 4.8

1.2 0.5

UG312L

³⁄₈ 9.5

³⁄₁₆ 4.8

2.0 0.9


1¹³⁄₃₂ 35.7

¹³⁄₃₂ 10.3

³⁄₁₆ 4.8

2.7 1.2

UG318L UG319L

1¹⁄₄ 31.8

1¹⁄₂ 38.1

⁹⁄₁₆ 14.3

³⁄₁₆ 4.8

3.5 1.6


3¹⁄₁₆ 77.8

1²⁵⁄₆₄ 35.3

1³⁹⁄₆₄ 40.9

⁹⁄₁₆ 14.3

³⁄₁₆ 4.8

5.0 2.3

UG324L

2¹⁹⁄₃₂ 65.88

3¹⁄₄ 82.6

1³⁵⁄₆₄ 39.3

1²⁷⁄₃₂ 46.8

⁹⁄₁₆ 14.3

³⁄₁₆ 4.8

6.5 2.9


2¹⁄₃₂ 51.59

2¹³⁄₁₆ 71.44

3⁷⁄₁₆ 87.3

1⁴³⁄₆₄ 42.5

1³¹⁄₃₂ 50.0

¹⁹⁄₃₂ 15.1

³⁄₁₆ 4.8

7.7 3.5

UG331L

5.375 136.52

2³⁄₁₆ 55.56

3¹⁄₁₆ 77.79

3¹⁵⁄₁₆ 100.0

1²⁷⁄₃₂ 46.8

2³⁄₁₆ 55.6

¹¹⁄₁₆ 17.5

³⁄₁₆ 4.8

9.7 4.4


CE-U336 CE-U339

5.781 146.84

2³⁄₈ 60.32

3⁵⁄₁₆ 84.14

4³⁄₁₆ 106.4

1¹⁵⁄₁₆ 49.2

2⁷⁄₁₆ 61.9

²³⁄₃₂ 18.2

³⁄₁₆ 4.8

12.0 5.4

UG336L UG339L

C-U343 C-U344

CE-U343 CE-U344

6.562 166.67

2³⁄₄ 69.85

3¹³⁄₁₆ 96.84

4³⁄₄ 120.6

2¹⁄₄ 57.2

2⁵⁄₈ 66.7

¹³⁄₁₆ 20.6

¹⁄₄ 6.4

17.0 7.7

UG343L UG344L

2¹⁵⁄₁₆

C-U347

CE-U347

6.969 177.01

3 76.20

4³⁄₃₂ 103.98

4¹⁵⁄₁₆ 125.4

2³⁄₈ 60.3

2³⁄₄ 69.8

¹³⁄₁₆ 20.6

³⁄₈ 9.5

19.7 8.9

UG347L

3 3³⁄₁₆

C-U348 C-U351

CE-U348 CE-U351

7.594 192.89

3³⁄₁₆ 80.96

4¹³⁄₃₂ 111.92

5¹¹⁄₁₆ 144.5

2¹⁹⁄₃₂ 65.9

3 76.2

1 25.4

³⁄₈ 9.5

26.9 12.2

UG348L UG351L

3⁷⁄₁₆

C-U355 C-U356

CE-U355 CE-U356

8.375 212.72

3⁹⁄₁₆ 90.49

4¹⁵⁄₁₆ 125.41

6 152.4

2²⁹⁄₃₂ 73.8

3⁹⁄₃₂ 83.3

1 25.4

³⁄₈ 9.5

35.5 16.1

UG355L UG356L

3¹⁵⁄₁₆

C-U363

CE-U363

9.375 238.12

4¹⁄₁₆ 103.17

5⁹⁄₁₆ 141.29

7 177.8

3⁹⁄₃₂ 83.3

3¹¹⁄₁₆ 93.7

1 25.4

³⁄₈ 9.5

49.5 22.4

UG363L

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for all expansion units with 2⁷⁄₁₆" and smaller shafts, ¹⁄₄"-28 UNF; for other expansion units and all fixed units, ¹⁄₈" PT. * Locking plug thread sizes: for 2⁷⁄₁₆" and smaller shafts, ⁷⁄₁₆"-20 UNF; for all others, ⁵⁄₈"-18 UNF. † Tolerance: +.000" –.002" (+0.00 –0.05 mm). Bore tolerance for mounting: +.002" –.000" (+0.05 –0.00 mm). g 1¹⁄₈ thru 2¹⁵⁄₁₆ shaft diameters also available with dual lip seals, add suffix N; i.e. C-U319N X Width dimension for closed end unit Selection guide, pages C-5, C-6. Load ratings, pages C-7, C-8. Additional information, page C-17.

C-13

Heavy Duty Ball Bearing Takeup Units

T-U300 Cast Iron Housing Machined Slots Alignable Spring Locking Collar Relubricatable


Takeup unit numberg

⁷⁄₈ ¹⁵⁄₁₆ 1

T-U314 T-U315 T-U316

3⁵⁄₁₆ 84.1

2¹⁄₄ 57.2

1⁴³⁄₆₄ 42.46

2 50.8

1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆

T-U320 T-U322 T-U323

4 2³⁄₄ 101.6 69.8

2³⁄₃₂ 53.18

1¹⁄₂

T-U324

4⁵⁄₈ 3¹⁄₄ 117.5 82.6

1¹⁵⁄₁₆

N S +.000" –.015" +.000" –.015" +0.00 +0.00 –0.38 mm –0.38 mm

W X

Y

⁵⁄₈ ⁶³⁄₆₄ 15.9 25.0

1¹⁵⁄₆₄ 31.4

2³⁄₄ 69.8

3.2 1.4


.531 13.49

⁵⁄₈ 1¹⁄₄ 15.9 31.8

1¹⁄₂ 38.1

3¹⁄₄ 82.6

5.5 2.5


4.125 104.78

.687 17.45

³⁄₄ 1²⁵⁄₆₄ 1³⁹⁄₆₄ 19.0 35.3 40.9

3¹³⁄₁₆ 96.8

8.5 3.8

UG324L

1¹⁄₄ 7³⁄₈ 2³⁄₁₆ 5⁷⁄₈ 3⁷⁄₁₆ 31.8 187.3 55.6 149.2 87.3

5.125 130.18

.812 20.62

1 1⁴³⁄₆₄ 1³¹⁄₃₂ 25.4 42.5 50.0

4⁵⁄₈ 13.7 117.5 6.2

UG331L

2¹⁄₄ 57.2

1¹⁄₄ 7³⁄₄ 2³⁄₈ 6¹⁄₄ 3¹⁵⁄₁₆ 31.8 196.8 60.3 158.8 100.0

5.500 139.70

.812 20.62

1 1²⁷⁄₃₂ 2³⁄₁₆ 25.4 46.8 55.6

4²⁷⁄₃₂ 17.2 123.0 7.8


4¹⁄₈ 2¹⁄₂ 104.8 63.5

1³⁄₈ 8⁵⁄₈ 2⁹⁄₁₆ 6³⁄₄ 4³⁄₁₆ 34.9 219.1 65.1 171.4 106.4

6.000 152.40

1.062 26.97

1³⁄₈ 1¹⁵⁄₁₆ 2⁷⁄₁₆ 34.9 49.2 61.9

5⁷⁄₁₆ 20.0 138.1 9.1

UG336L UG339L

8 5³⁄₄ 4³⁄₃₂ 4³⁄₄ 2³⁄₄ 203.2 146.0 103.98 120.6 69.8

1⁵⁄₈ 10¹⁄₂ 3¹⁄₄ 8¹⁄₄ 4¹⁵⁄₁₆ 41.3 266.7 82.6 209.6 125.4

7.500 190.50

1.312 33.32

1¹⁄₄ 2³⁄₈ 31.8 60.3

6¹⁄₂ 37.5 165.1 17.0

UG347L

A

C

D

F

G

H

J

K

L

M

1¹⁄₄ 31.8

³⁄₄ 4³⁄₈ 1³⁄₈ 3⁵⁄₈ 19.0 111.1 34.9 92.1

2 50.8

3.000 76.20

.531 13.49

2³⁄₈ 60.3

1⁷⁄₁₆ 36.5

⁷⁄₈ 5¹⁄₄ 1⁵⁄₈ 4¹⁄₈ 2⁹⁄₁₆ 22.2 133.4 41.3 104.8 65.1

3.500 88.90

2⁵⁄₁₆ 58.74

3³⁄₁₆ 81.0

1¹⁵⁄₁₆ 1¹⁄₈ 6¹⁄₈ 1²⁵⁄₃₂ 4⁷⁄₈ 3¹⁄₁₆ 49.2 28.6 155.6 45.2 123.8 77.8

T-U331

5¹⁄₂ 4 2¹³⁄₁₆ 139.7 101.6 71.44

3³⁄₄ 95.2

2¹⁄₄ 57.2

2 2¹⁄₈ 2³⁄₁₆

T-U332 T-U334 T-U335

5¹³⁄₁₆ 4¹⁄₈ 3¹⁄₁₆ 147.6 104.8 77.79

3³⁄₄ 95.2

2¹⁄₄ 2⁷⁄₁₆

T-U336 T-U339

6¹⁄₄ 4¹⁄₂ 3⁵⁄₁₆ 158.8 114.3 84.14

2¹⁵⁄₁₆

T-U347

T

U

2³⁄₄ 69.8

Unit wt. Bearing (lbs./kg.) no.

Please consult for availability. Lubrication fitting tap size: ¹⁄₈" PT. g 1¹⁄₄ thru 2¹⁵⁄₁₆ shaft diameters also available with dual lip seals, add suffix N; i.e. T-U320N X Width dimension for closed end unit. Selection guide, pages C-5, C-6. Load ratings, pages C-7, C-8. Additional information, page C-17.

C-14

Heavy Duty Ball Bearing Takeups

LHD Type (Bearing Unit Not Included) Welded Steel Frame Protected Screw P-U300 Bearing Unit Pillow Block

Dimensions (inches/mm) Shaft Sizes inches

Takeup Frame number

Adjustment

B

⁷⁄₈ Thru 1¹⁵⁄₁₆

LHD20-12 LHD20-18 LHD20-24 LHD20-30 LHD20-36 LHD20-48

12 18 24 30 36 48

29 35 41 47 53 65

31 37 43 49 55 67

4 101.6

5 127.0

2 Thru 2³⁄₁₆


12 18 24 30 36 48

32³⁄₄ 38³⁄₄ 44³⁄₄ 50³⁄₄ 56³⁄₄ 68³⁄₄

35¹⁄₄ 41¹⁄₄ 47¹⁄₄ 53¹⁄₄ 59¹⁄₄ 71¹⁄₄

5 127.0

2¹⁄₄ Thru 2⁷⁄₁₆


12 18 24 30 36 48

35¹⁄₂ 41¹⁄₂ 47¹⁄₂ 53¹⁄₂ 59¹⁄₂ 71¹⁄₂

38¹⁄₄ 44¹⁄₄ 50¹⁄₄ 56¹⁄₄ 62¹⁄₄ 74¹⁄₄

2¹¹⁄₁₆ Thru 3³⁄₁₆


12 18 24 30 36 48

37¹⁄₄ 43¹⁄₄ 49¹⁄₄ 55¹⁄₄ 61¹⁄₄ 73¹⁄₄

3⁷⁄₁₆ Thru 3¹⁵⁄₁₆


12 18 24 30 36 48

41¹⁄₄ 47¹⁄₄ 53¹⁄₄ 59¹⁄₄ 65¹⁄₄ 77¹⁄₄

C

D

E

F bolts

G

H

⁵⁄₈ 16

2¹⁄₂ 63.5

¹⁄₄ 6.4

5¹⁄₂ 139.7

⁵⁄₈ 16

3 76.2

6 152.4

6¹⁄₂ 165.1

³⁄₄ 20

40 46 52 58 64 76

6 152.4

6¹⁄₂ 165.1

44 50 56 62 68 80

7 177.8

6¹⁄₂ 165.1

K

L

M

R

S Rod Dia.

V

Z

8¹⁄₂ 215.9

5¹⁄₄ 133.4

11 279.4

4 101.6

³⁄₄ ...

2 50.8

6¹⁄₄ 158.8

³⁄₈ 9.5

10³⁄₈ 263.5

6¹⁄₄ 158.8

13¹⁄₄ 336.6

5 127.0

1 ...

2⁹⁄₁₆ 65.1

7¹⁄₈ 181.0

3 76.2

¹⁄₂ 12.7

11³⁄₄ 298.4

7 177.8

14¹⁄₄ 362.0

6 152.4

1 ...

2¹⁄₂ 63.5

9 228.6

³⁄₄ 20

3 76.2

¹⁄₂ 12.7

12⁵⁄₈ 320.7

7 177.8

16 406.4

6 152.4

1¹⁄₄ ...

2¹⁄₂ 63.5

9 228.6

³⁄₄ 20

3 76.2

¹⁄₂ 12.7

14⁵⁄₈ 371.5

7 177.8

20 508.0

6 152.4

1¹⁄₂ ...

2¹⁄₈ 54.0

9¹³⁄₁₆ 249.2

Bold face items are normally available from stock; please consult for availability of non-stock items. Takeup frames can be furnished drilled to accommodate pillow block; order takeup frame drilled for " " pillow block; i.e. LHD20-12 drilled for P-U316. Selection guide, pages C-5, C-6. Load ratings, pages C-7, C-8. Additional information, page C-17.

C-15

Replacement Ball Bearings

UG300L Alignable Spherical O.D. Bearing Seals Spring Locking Collar Relubricatable

Dimensions (inches/mm) Shaft diameter inches ³⁄₄

Bearing Number (

Bearing bore tolerance

UG312L

B

UG314L UG315L

1

UG316L

1¹⁄₈ 1³⁄₁₆

UG318L UG319L

1¹⁄₄ 1³⁄₈

UG320L UG322L

1⁷⁄₁₆ 1¹⁄₂

UG323L UG324L

.7874

1⁵⁄₈

1.194

¹¹⁄₃₂

20.000

41.3

30.33

8.7

+.0000 –.0005

+0.018 –0.000

+0.000 –0.013 2.4409

1⁴³⁄₆₄

¹¹⁄₁₆

.8661

2

1.451

¹³⁄₃₂

62.000

42.46

17.46

22.000

50.8

46.86

10.3

1⁵⁹⁄₆₄ 48.82

²⁵⁄₃₂ 19.84

.9449 24.000

2⁵⁄₁₆ 58.7

1.708 43.38

¹⁄₂ 12.7

+.0008 –.0000 +.0020 –.0000

2.8346 72.000

+.0008 –0.000 +0.020 –0.000

3.1496

2³⁄₃₂

²⁷⁄₃₂

1.0236

2⁹⁄₁₆

1.946

¹|₂

+.0008 –.0000

80.000 3.5433

+.0000 –.0006

53.18 2⁵⁄₁₆

21.43 ⁵⁹⁄₆₄

26.000 1.1024

65.1 3¹⁄₁₆

49.43 2.204

12.7 ⁹⁄₁₆

+0.020 –0.000

90.000

+0.000 –0.015

58.74

23.42

28.000

77.8

55.98

14.3

+.0009 –.0000

3.9370 100.000

2¹⁹⁄₃₂ 65.88

1³⁄₆₄ 26.59

1.1811 30.000

3¹⁄₂ 82.6

2.443 62.05

⁵⁄₈ 15.9

2¹³⁄₁₆ 71.44

1⁹⁄₆₄ 28.97

1.2598 32.000

3⁷⁄₁₆ 87.3

2.701 68.60

²¹⁄₃₂ 16.7

4.7244

3¹⁄₁₆

1⁷⁄₃₂

1.3386

3¹⁵⁄₁₆

2.959

³⁄₄

120.000

77.79

30.96

34.000

100.0

75.16

19.0

3⁵⁄₁₆ 84.14

1³⁄₈ 34.92

1.4173 36.000

4³⁄₁₆ 106.4

3.216 81.69

³⁄₄ 19.0

3¹³⁄₁₆ 96.84

1⁹⁄₁₆ 39.69

1.6142 41.000

4³⁄₄ 120.6

3.732 94.79

⁷⁄₈ 22.2

4³⁄₃₂ 103.98

1²³⁄₃₂ 43.66

1.6929 43.000

4¹⁵⁄₁₆ 125.4

3.990 101.35

⁷⁄₈ 22.2

4¹³⁄₃₂ 111.92

1¹³⁄₁₆ 46.04

1.7717 45.000

5¹¹⁄₁₆ 144.5

4.247 107.87

1 25.4

4¹⁵⁄₁₆

2¹⁄₃₂

1.9291

6

4.763

125.41 5⁹⁄₁₆

51.59 2⁹⁄₃₂

49.000 2.1654

152.4 7

120.98 5.339

28.6 1¹⁄₄

141.29

57.94

55.000

177.8

135.61

31.8

+.0000 –.0005 +0.000 –0.013

UG331L

2 2¹⁄₈

UG332L UG334L

2³⁄₁₆

UG335L

2¹⁄₄ 2⁷⁄₁₆

UG336L UG339L

+.0009 –.0000 +0.023 –0.000

5.1181 130.000

2¹¹⁄₁₆ 2³⁄₄

UG343L UG344L

+0.011 –0.000 +0.028 –0.000

5.9055 150.000

2¹⁵⁄₁₆

UG347L +.0011 –.0000

6.2992 160.000

UG355L

T

15.88

1¹⁵⁄₁₆

UG356L UG363L

N

⁵⁄₈

UG327L UG328L

3⁷⁄₁₆

M

37.31

1¹¹⁄₁₆ 1³⁄₄

3¹⁄₂ 3¹⁵⁄₁₆

J

1¹⁵⁄₃₂

UG326L

UG348L UG351L

G

52.000

1⁵⁄₈

3 3³⁄₁₆

D

2.0472 +.0007 –.0000

⁷⁄₈ ¹⁵⁄₁₆

Bearing OD tolerance

+0.023 –0.000

+.0009 –.0000 +.0023 –.0000

4.3307 110.000

+0.028 –0.000

6.6929 170.000

+.0011 –.0000 +0.028 –0.000

190.000 8.4646

+.0000 –.0006 +0.000 –0.015

+.0000 –.0008 +0.000 –0.020

+.0000 –.0010 +0.000 –0.025

7.4806

215.000

+.0000 –.0012 +0.000 –0.030

1¹⁄₈

Bold face items are normally available from stock; please consult for availability of non-stock items. ( Bearing sealed replacement bearing includes bearing, collar, seals, and two external seal flingers. Selection guide, pages C-5, C-6. Load ratings, pages C-7, C-8. Additional information, page C-17.

C-16


Series 300 Additional Features: All Series 300 mounted units can be purchased with a closed end cap in place of one seal, usually the collar side. End caps are made of heavy gauge steel and completely cover rotating elements on the closed end side. The bearing and grease condition can be inspected by removing the closed end cap. With the use of end caps, shafting should not extend more than ¹⁄₈" (3.2 mm) beyond the end of the bearing inner ring. Series 300 units have drilled or cored mounting bolt holes suitable for the inch or metric bolts listed. Drilled holes will be ¹⁄₃₂" (0.8 mm) larger than the largest inch bolt shown. Cast slots in pillow blocks are normally ¹⁄₁₆" wider than the specified mounting bolt nominal diameter. It is expected that plain washers will be used under the bolt head to span the slot width and aid torquing. Narrow (N) series washers per ANSI B18.22.11981 (previously designated SAE series) are recommended. If wide series washers are used, the full length of the slot may not be usable for positioning the unit.

Recommended Shaft Tolerances Shaft Diameter ¹⁄₂"-2" 2¹⁄₈"-3¹⁵⁄₁₆"

Tolerance Nominal to –.0005" Nominal to –.0010"

The above shaft tolerances are suitable for loads up to .18C and L₁₀ life greater than 20,000 hours. For more severe conditions, consult Rexnord Corporation.

Bearings and seals can be replaced in all Series 300 mounted units. When UG300L replacement bearings are inserted in a housing, the Service Instructions for mounting should be closely followed. A copy is enclosed with each replacement UG300L. Replacement bearings are prelubricated.

Operation: Series 300 solid housing units are prelubricated with a good quality petroleum grease of No. 2 consistency which has been tested for operational characteristics and stability for long shelf life. Service instructions packed with each unit provide guidelines for correct installation and for relubrication intervals. Greases tested for use in Series 300 units are listed and can be used for relubrication. The lubricant furnished by Rexnord Corporation is generally limited to an operating temperature range of –20°F to 200°F (–29°C to +93°C).

Imposed radial loads should not exceed .25C. Where high radial loads, high speeds, thrust loads or vibratory loads are unavoidable, consult the Link-Belt Bearing Division. Care should be taken during relubrication to avoid the application of excessive grease pressure or volume. Use of automatic lubricators or hand grease guns is recommended. Bearings furnished with all standard series 300 units have sufficient clearance (C3) for operation within stated speed limits.

Takeups: For mounting P-U300 or PE-U300 series pillow blocks to universal takeup frames as illustrated on page B-60 or heavy duty welded steel frames as illustrated on page C-15.

The service life of a collar mounted bearing is largely dependent on shaft fit and may be expected to approach theoretical L₁₀ life only if the bearing is press fitted to a shaft. A slip fit mounting in accordance with the shaft tolerances shown in table will provide generally acceptable service life on normal applications under light to moderate load and speed conditions. A shaft tolerance resulting in looser fits (such as with commercial shafting) may be expected to have greatly reduced

reliability and increasing problems of shaft fret wear, bearing inner ring fracture and shaft slippage. In general, looser fits than recommended are feasible only for very light loading and lower speeds. Prototype or field testing is strongly recommended if looser fits must be considered.

tension loads except with adequate safety factors. For this reason pillow blocks are best suited to withstand radial loads ing through the base. When heavy loads or shock loads are possible, it is most important to mount a unit so that the unit is directly and substantially ed other than through its mounting bolts. Where the line of force falls outside the base, such as with horizontal or uplift loads on pillow blocks, serious housing and fastener deflections or failure may occur. These conditions may require designs using different materials, fasteners, mounting design, stop bars, etc., together with proper safety factors.

When these conditions are unavoidable, Link-Belt Bearing Division, Rexnord Corporation should be consulted.


Warning: The correct selection of bearings or mounted units requires that the magnitude and nature of all loads, speeds, alignment, mounting, operating requirements, and maintenance be adequately considered. The selection of materials for and designs of housings, shafting, fasteners, seals, and accessories, as well as provisions for installation and maintenance, must follow good engineering principles. Housings must be selected and installed with regard to the degree and direction of the forces that will occur. Housings should not be used under C-17


Nomenclature

Series 300 Ball Bearing Units Symbol C F FC P PL P2 T

Description

P

E

E

Expansion unit

U Y

Bearing sealed unit, spring locking, relubricatable Bearing sealed unit, eccentric cam locking collar, relubricatable

3

300 series designation

K

Adapter mounted

23 F none N C 17H 4

-U

3

K

23

F

N

C 17H

4

K

47

L

Cartridge unit Flanged unit; 4 bolt square Flanged cartridge unit; 4 bolt round Pillow block; standard backing Pillow block; low backing Pillow block; high backing Takeup unit, slotted guides

Shaft diameter in 16ths on an inch Four bolt base pillow block Steel clad clearance seal Molded double lip seal Closed end unit Grease designation Clearance, other than standard

Replacement Ball Bearing Symbol UG YG

Description

300 series designation

K

Adapter mounted

none N L L1

3

N

Wide inner ring, bearing seals, spring locking collar Wide inner ring, bearing seals, eccentric cam locking collar

3

47

UG

Shaft diameter in 16ths of an inch Steel clad clearance seal Molded double lip seal Bearing assembly with collar and bearing seals Bearing assembly without collar and with bearing seals

The nomenclature shown is provided to identify the basic and optional features of bearing and mounted unit assemblies. The most commonly specified variations are listed; however, availability of all variations cannot be assumed. Link-Belt Bearing Division, Rexnord Corp. should be consulted regarding optional features, availability, and the application requirements.

C-18

Spherical Roller Bearing Units and Takeups Series B22400

Contents

Spherical Roller Bearing Units and Takeups

Series B22400 Introduction ................................... D-1 Pictorial Index ............................... D-3 Selection ........................................ D-5 Load Ratings ................................. D-7 Dimensions .................................... D-9 Replacement Bearings .............. D-26 Replacement Parts .................... D-62 Additional Information ............... D-68 Nomenclature ............................. D-70

Series B22500 Introduction ................................ Pictorial Index ............................ Selection ..................................... Load Ratings .............................. Dimensions ................................. Replacement Bearings .............. Replacement Parts .................... Additional Information ............... Nomenclature .............................

D-27 D-29 D-31 D-33 D-35 D-40 D-64 D-68 D-70

D-1

D-41 D-43 D-45 D-47 D-49 D-61 D-66 D-69 D-70

b Choice of two seals, floating labyrinth Type H and spring-loaded lip Type E. c Long inner ring for high stability and load . d Self-aligning double row spherical roller bearing adjusts ±2° to allow for alignment variations between shaft and ing structure. e Double contoured retainer pockets assure accurate roller guidance and positive roller control. f Sturdy, compact one-piece cast iron or cast steel housing. g Slotted bolt holes in pillow block bases facilitate mounting; bottom of base is machined.

c b

Max MountE Series B22600 Introduction ................................ Pictorial Index ............................ Selection ..................................... Load Ratings .............................. Dimensions ................................. Replacement Bearings .............. Replacement Parts .................... Additional Information ............... Nomenclature .............................

Series B22400 collar mounted spherical roller bearing units provide economic and versatile arrangements for ing shafts carrying substantial radial or combination radial and thrust loads. These units are especially adaptable for conveyors, elevators, general industrial machinery, heavier duty fans and blowers, power transmission applications, ditchers, trenchers, pavers and other such applications. Series B22400 units are easy to mount, sealed, prelubricated and do not require bearing adjustment during mounting.

a Spring locking collar locks inner ring securely to shaft.

a

d e f g

Spherical Roller Bearings Series B22400 self-aligning double row spherical roller bearings have high LDN values and are designed to distribute the load over the symmetrical rollers, assuring positive tracking and smooth operation. The large roller complement provides high capacity for radial or combined radial-thrust loads. Osculation

clearance at the ends of the rollers compensates for shock loads and prevents destructive edge loading. These precision bearings with double contoured retainer pockets are designed to meet a broad range of application requirements.

Spring Locking Collar The spring locking collar design provides a secure grip of the wide inner ring bearing to the shaft. The two set screws extend through the inner ring of the bearing and lock firmly onto the shaft. Installation is fast and simple. Correctly tightening the two set screws produces elastic strain in the spring

locking collar resulting in a continuous pressure on the set screw threads and providing a positive lock.

Seals Two standard sealing systems are available. . .each offering maximum protection for the bearing. Type H floating labyrinth seals have multiple self-centering rings held securely in a steel carrier. Type H seals are normally furnished.

Type E spring-loaded lip seals utilize a spring to provide uniform pressure for keeping the sealing lip in with the inner ring. Type E seals are normally used for liquid splash environments. Seals are interchangeable and are designed for grease lubrication.

TYPE H SEAL

TYPE E SEAL

One-Piece Cast Iron or Cast Steel Housings Compact one-piece housings provide for strength and load . Scientifically contoured housing design provides superior rigidity. Cast iron or cast steel pillow blocks have two or four slotted bolt holes with ample space provided for drilling dowel pin holes. Flanged and flanged cartridge units have drilled

mounting holes and machined mounting surfaces for maximum stability. Cartridge units have cast iron or steel housings and are finished to precision tolerances. Takeup units have machined slots for smooth, precise operation. Pillow blocks, flanged, and cartridge units are available for fixed or expansion operation.

D-2

Series B22400 Spherical Roller Bearing Units Pillow Blocks, cast iron EP-B22400H*, EPE-B22400H*, EP-B22400FH*, EPE-B22400FH* P-B22400H, PE-B22400H, P-B22400FH, PE-B22400FH P-B22500FH, PE-22500FH Self-aligning 2-bolt base pillow blocks for shaft sizes 1" through 4" and 25 mm through 100 mm, and 4-bolt base pillow blocks for shaft sizes 1¹⁵⁄₁₆" through 5" and 45 mm through 125 mm. Units are available for fixed or expansion mounting. Load ratings on pages D-7 and D-8. Dimensions on pages D-9 through D-12. Additional information on page D-68. *Self-aligning Type E Interchange

Pillow Blocks, cast steel PK-B22400H, PKE-B22400H, PK-B22400FH, PKE-B22400FH, PK-B22500FH, PKE-B22500FH Self-aligning 2-bolt base pillow blocks for shaft sizes 1³⁄₁₆" through 4" and 30 mm through 100 mm, 4-bolt base pillow blocks for shaft sizes 1¹⁵⁄₁₆" through 5" and 45 mm through 125 mm. Units are available for fixed or expansion mounting. Load ratings on pages D-7 and D-8. Dimensions on pages D-13 and D-14. Additional information on page D-68.

Flanged Units, cast iron EFR-B22400H* F-B22400H, FE-B22400H Self-aligning flanged units for shaft sizes 1" through 4" and 25 mm through 100 mm. Units are available for fixed or expansion mounting. Load ratings on pages D-7 and D-8. Dimensions on pages D-17 and D-18. Additional information on page D-68. *Self-aligning Type E Interchange

Flanged Cartridge Units, cast iron FC-B22400H* Self-aligning flanged cartridge units for shaft sizes 1" through 4" and 25 mm through 100 mm. Units are available for fixed mounting. Load ratings on pages D-7 and D-8. Dimensions on page D-20. Additional information on page D-68. *Self-aligning Type E Interchange

D-3

Cartridge Units, cast iron and steel C-B22400H, CSE-B22400H Self-aligning cartridge units. Cast iron housings for shaft sizes 1" through 3¹⁄₂" and 25 mm through 85 mm, steel housings for shaft sizes 1" through 4" and 25 mm through 100 mm. Cast iron cartridge units are for fixed mounting and steel cartridge units are available for fixed or expansion mounting. Load ratings on pages D-7 and D-8. Dimensions on pages D-15 and D-16. Additional information on page D-68.

Takeup Units, cast iron T-B22400H Self-aligning units for takeup applications with shaft sizes 1" through 4" and 25 mm through 100 mm. Fixed units without frames, guides, or adjusting screws. Load ratings on pages D-7 and D-8. Dimensions on page D-21. Additional information on page D-68.

Takeups, cast iron DS-B22400H; DS-B22500H, LHD DS-B22400H and DS-B22500H for shaft sizes 1¹⁵⁄₁₆" through 4⁷⁄₁₆" and 45 mm through 115 mm have welded steel adjustable frames. LHD universal takeup frames use pillow blocks mounted to takeup frame. For shaft sizes 1³⁄₁₆" through 5" and 25 mm through 125 mm. Load ratings on pages D-7 and D-8. Dimensions on pages D-22 through D-24. Additional information on page D-68.

Replacement Bearings B22400HL Self-aligning double row spherical roller bearings with spring locking collars for shaft sizes 1" through 4" and 25 mm through 100 mm. Load ratings on pages D-7 and D-8. Dimensions on page D-26. Additional information on page D-68.

D-4

Selection

Series B22400 To select a bearing, determine the applied radial load, the applied thrust load, the desired Rating Life, and applicable operating conditions. The procedure shown here will aid in selecting a bearing to meet an L₁₀ design life. The formulas for calculating life expectancy should be used to determine the Rating Life L₁₀ for the bearing selected.

The selection procedures and rating formulas shown here are in agreement with The American Bearing Manufacturers Association Standards and ANSI/ ABMA Standards STD 11-1990. Ratings are based on fatigue life. The Rating Life L₁₀ or fatigue life at 90% reliability is the usual basis for bearing selection.

Bearing Selection Step 1 Determine an appropriate L₁₀ design life. Operating time, Type of service hours per year Light seasonal usage Heavy seasonal usage Industrial—8 hour shift Industrial—16 hour shift Industrial—continuous

500 to 750 1,400 to 1,600 2,000 4,000 8,700

Design life, years 3-5 4-6 10 10 10


from Table 1.

Step 2 Determine a required

Step 3 Calculate the required C and select a roller bearing. a For radial load only: P = Fr required C =

P

using

from Step 2

Select a roller bearing from Table 2, page D-7 with a basic load rating C equal to or greater than the required C. b For combined radial and thrust loads: Select a trial roller bearing of the desired shaft size from Table 2, page D-7. Calculate the ratio of thrust load Fa to the radial load Fr.

Calculate the equivalent radial load P P = XFr + YF a If

is equal to or less than e, then P = X 1Fr + Y1Fa

If

is greater than e, then P = X 2Fr + Y2Fa

For values of e, X1, Y1, X2, and Y2, see Table 2, page D-7. Calculate the required C required C =

P using

from Step 2.

Consult Table 2, page D-7, basic load rating. If a smaller bearing meets, or nearly meets, the required C, its life expectancy can be calculated. Note: If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp.

D-5

For radial load applications only, Table 3, page D-8, can be used to select a bearing or to determine L₁₀ life expectancy. To assure a satisfactory bearing application, fitting practice, mounting, lubrication, sealing, static rating, housing strength, operating conditions and maintenance must be considered.

Selection

Series B22400 symbols for formulas: C Co e Fa Fr L₁₀ n P X Y

= = = = = = = = = =

basic formulas:


= L₁₀ u n u 60 1,000,000

3/10

10/3

L₁₀ =

u1,000,000 n u 60

Life Expectancy To calculate the Rating Life L₁₀ of any selected or trial bearing:

Table 1 • Relation of L₁₀ life and speed to

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

Step 1 Determine the equivalent radial load P.

ratio

Bearing life, hours L₁₀

a

Speed, n 50

100

200

300

400

500

600

700

800

1.93 2.11 2.25 2.38 2.59 2.77 2.93 3.07 3.19 3.31 3.42 3.65 3.86 4.04 4.20 4.36 4.50 4.75 4.97 5.18 5.36 5.54 6.25 6.81

2.38 2.59 2.77 2.93 3.19 3.42 3.61 3.78 3.93 4.07 4.20 4.50 4.75 4.97 5.18 5.36 5.54 5.85 6.12 6.37 6.60 6.81 7.70 8.39

2.93 3.19 3.42 3.61 3.93 4.20 4.44 4.65 4.84 5.02 5.18 5.54 5.85 6.12 6.37 6.60 6.81 7.20 7.54 7.85 8.13 8.39 9.48 10.30

3.31 3.61 3.86 4.07 4.44 4.75 5.02 5.25 5.47 5.66 5.85 6.25 6.60 6.92 7.20 7.46 7.70 8.13 8.51 8.86 9.18 9.48 10.70 11.70

3.61 3.93 4.20 4.44 4.84 5.18 5.47 5.73 5.96 6.18 6.37 6.81 7.20 7.54 7.85 8.13 8.39 8.86 9.28 9.66 10.00 10.30 11.70 12.70

3.86 4.20 4.50 4.75 5.18 5.54 5.85 6.12 6.37 6.60 6.81 7.29 7.70 8.06 8.39 8.69 8.97 9.48 9.92 10.30 10.70 11.00 12.50 13.60

4.07 4.44 4.75 5.02 5.47 5.85 6.18 6.47 6.73 6.97 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.00 10.50 10.90 11.30 11.70 13.20 14.40

4.27 4.65 4.97 5.25 5.73 6.12 6.47 6.77 7.05 7.30 7.54 8.06 8.51 8.92 9.28 9.61 9.92 10.50 11.00 11.40 11.80 12.20 13.80 15.00

4.44 4.84 5.18 5.47 5.96 6.37 6.73 7.05 7.34 7.60 7.85 8.39 8.86 9.28 9.66 10.00 10.30 10.90 11.40 11.90 12.30 12.70 14.40 15.70

900

1000 1200 1500 1800 2400 3000 3600 6000

4.60 5.02 5.36 5.66 6.18 6.60 6.97 7.30 7.60 7.88 8.13 8.69 9.18 9.61 10.00 10.40 10.70 11.30 11.80 12.30 12.80 13.20 14.90 16.20

4.75 5.18 5.54 5.85 6.37 6.81 7.20 7.54 7.85 8.13 8.39 8.97 9.48 9.92 10.30 10.70 11.00 11.70 12.20 12.70 13.20 13.60 15.40 16.70

5.02 5.47 5.85 6.18 6.73 7.20 7.60 7.96 8.29 8.59 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.30 12.90 13.40 13.90 14.40 16.20 17.70

5.36 5.85 6.25 6.60 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.10 10.70 11.20 11.70 12.10 12.50 13.20 13.80 14.40 14.90 15.40 17.30 18.90

5.66 6.18 6.60 6.97 7.60 8.13 8.59 8.99 9.36 9.70 10.00 10.70 11.30 11.80 12.30 12.80 13.20 13.90 14.60 15.20 15.70 16.20 18.30 20.00

P = Fr b For combined radial and thrust load: P = XF r + YF a If

is equal to or less than e, then P = X 1F r + Y 1F a

If

is greater than e, then P = X 2F r + Y 2F a

For values of e, X1, Y1, X2, and Y2, see Table 2, page D-7. Step 2 Calculate the ratio of the basic load rating C to the equivalent radial load. C P Step 3 Approximate the bearing life from Table 1.

Life Adjustment

Speed, n 3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

For radial load only:

6.18 6.73 7.20 7.60 8.29 8.86 9.36 9.80 10.20 10.60 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.20 15.90 16.50 17.10 17.70 20.00 21.80

6.60 7.20 7.70 8.13 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.50 13.20 13.80 14.40 14.90 15.40 16.20 17.00 17.70 18.30 18.90 21.40 23.30

6.97 7.60 8.13 8.59 9.36 10.00 10.60 11.10 11.50 11.90 12.30 13.20 13.90 14.60 15.20 15.70 16.20 17.10 17.90 18.70 19.40 20.00 22.60 24.60

8.13 8.86 9.48 10.00 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.40 16.20 17.00 17.70 18.30 18.90 20.00 20.90 21.80 22.60 23.30 26.30 28.70

The Rating Life, L₁₀, may be modified for some applications in accordance with the formula ,

Ln = a₁a₂a₃L₁₀ where

,

Ln = Adjusted life for (100-n) % reliablility, a₁ = Life adjustment factor for reliability a₂ = Life adjustment factor for material and processing a₃ = Life adjustment factor for operating conditions. For most normal applications, all factors will be taken as 1, and the Rating Life used as the selection basis or life estimate. In addition, as long as standard catalog bearings are used, a₂ will be normally set equal to one. The factor a₃ covers such things as lubrication, misalignment, and temperature. Some conditions that could yield a₃ significantly different than unity include speeds less than 20000 DN or greater than 200000 DN, temperatures below –40°F (–40°C) or above 275°F (135°C). For other possible conditions, as well as additional information on life adjustment factors, consult Link-Belt Bearing Division, Rexnord Corp. D-6

Load Ratings

Series B22400 Table 2 • Load ratings and speed limits Shaft diameter mm

inches

1 25 1³⁄₁₆ 1¹⁄₄ 30 1⁷⁄₁₆ 1¹⁄₂ 35 1¹⁄₂ 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 40 1³⁄₄ 1¹⁵⁄₁₆ 2 45 50 2³⁄₁₆ 2¹⁄₄ 55 2¹⁄₄ 2⁷⁄₁₆ 2¹⁄₂ 60 2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3 65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4 90 100

Bearing size number

B22416 B224M25 B22419 B22420 B224M30 B22423 B22424 B224M35 B224B24 B22426 B22427 B22428 B224M40 B224B28 B22431 B22432 B224M45 B225M50 B22435 B22436 B224M55 B224B36 B22439 B22440 B224M60 B22443 B22444 B22447 B22448 B224M65 B224M70 B224M75 B22451 B22455 B22456 B224M80 B224M85 B22459 B22463 B22464 B224M90 B224M100



C Basic load rating

Le

X₁

Y₁

X₂

Y₂

.51

1.00

1.32

.67

1.96

3000

.48

1.00

1.40

.67

2.08

14600

2750

.44

1.00

1.54

.67

2.29

89 800

20200

2350

.45

1.00

1.51

.67

2.25

33200

94 300

21200

2150

.40

1.00

1.68

.67

2.50

197 500

44400

117 400

26400

1950

.40

1.00

1.68

.67

2.50

238 000

53500

139 700

31400

1750

.38

1.00

1.80

.67

2.68

318 000

71500

185 900

41800

1500

.38

1.00

1.79

.67

2.67

403 400

90700

226 800

51000

1250

.38

1.00

1.77

.67

2.64

609 400

137000

351 800

79100

1100

.36

1.00

1.88

.67

2.79

newtons

pounds

newtons

pounds

H and E seals

66 100

14900

51 200

11500

3500

80 500

18100

60 900

13700

93 200

20900

64 900

127 700

28700

147 700

For load ratings of 4³⁄₁₆" (110 through 125 mm), see series B22500 page D-33. If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp. For vertical shift application, consult Link-Belt Bearing Division, Rexnord Corp. V Based on grease lubrication and moderate load. Additional information, page D-68.

D-7

≤e

e

Load Ratings

Series B22400 Table 3 • Radial load ratings in pounds at various RPM for appropriate L₁₀ life hours Shaft diameter mm

inches



100

200

300

500

700

900

1000

1200

1500

1800

2000

2500

3000

1

B22416 B224M25

8000 20000 40000 100000

.... .... 2730 2080

.... 2730 2220 1690

.... 2220 1800 1370

2590 1970 1600 1210

2220 1690 1370 1040

2000 1520 1230 941

1860 1410 1140 872

1800 1370 1110 845

1700 1300 1050 800

1600 1210 985 749

1510 1140 933 709

1470 1110 904 687

1370 1040 845 642

1300 985 800 608

1³⁄₁₆ 1¹⁄₄

B22419 B22420 B224M30

8000 20000 40000 100000

.... .... 3250 2480

.... 3250 2640 2010

.... 2640 2140 1630

3080 2340 1900 1440

2640 2010 1630 1240

2390 1810 1480 1120

2210 1690 1370 1030

2140 1630 1320 1000

2030 1540 1250 953

1900 1440 1170 892

1800 1370 1110 844

1740 1320 1080 818

1630 1240 1000 765

1540 1170 953 724

1⁷⁄₁₆ 1¹⁄₂

B22423 B22424 B224M35

8000 20000 40000 100000

.... .... 3470 2630

.... 3470 2820 2140

.... 2820 2290 1740

3290 2500 2020 1540

2820 2140 1740 1320

2540 1930 1570 1200

2360 1800 1450 1100

2290 1740 1410 1070

2170 1640 1330 1010

2020 1540 1250 950

1920 1450 1180 900

1860 1410 1140 872

1740 1320 1070 815

1¹⁄₂ 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

B224B24 B22426 B22427 B22428 B224M40

8000 20000 40000

.... .... 4800

.... 4800 3900

.... 3900 3170

4540 3450 2800

3900 2960 2400

3520 2680 2180

3270 2480 2010

3170 2400 1950

3000 2280 1850

2800 2130 1730

2650 2010 1630

2570 1950 1590

100000

3640

2960

2400

2130

1820

1650

1530

1490

1400

1310

1240

1200

1³⁄₄ 1¹⁵⁄₁₆ 2

B224B28 B22431 B22432 B224M45 B225M50

8000 20000 40000

.... .... 5040

.... 5040 4100

.... 4100 3320

4770 3620 2940

4100 3110 2520

3700 2810 2280

3430 2600 2110

3320 2520 2050

3140 2390 1940

2940 2230 1810

2790 2110 1720

2700 2050 1670

100000

3830

3110

2520

2230

1910

1730

1600

1550

1480

1380

1300

1270

2³⁄₁₆ 2¹⁄₄

B22435 B22436 B224M55

8000 20000 40000 100000

.... .... 6280 4770

.... 6280 5100 3870

.... 5100 4140 3140

5940 4510 3670 2790

5100 3870 3140 2390

4600 3500 2840 2160

4280 3240 2630 2000

4140 3140 2550 1940

3920 2980 2410 1830

3670 2790 2260 1710

3470 2630 2140 1620

2¹⁄₄ 2⁷⁄₁₆ 2¹⁄₂

B224B36 B22439 B22440 B224M60

8000 20000 40000 100000

.... .... 7470 5670

.... 7470 6070 4600

.... 6070 4920 3740

7070 5370 4360 3310

6070 4600 3740 2840

5480 4170 3380 2570

5090 3860 3130 2380

4920 3740 3030 2300

4660 3540 2880 2190

4360 3310 2690 2040

2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3

B22443 B22444 B22447 B22448 B224M65 B224M70 B224M75

8000 20000 40000 100000

.... .... 9940 7550

.... 9940 8070 6130

.... 8070 6550 4980

9410 7150 5800 4410

8070 6130 4980 3780

7300 5540 4500 3420

6770 5140 4180 3170

6550 4980 4040 3070

6200 4710 3830 2910

5800 4410 3580 2720

3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂

B22451 B22455 B22456 B224M80 B224M85

8000 20000 40000 100000

.... .... 12100 9210

.... 12100 9850 7480

.... 9850 8000 6080

11400 8720 7090 5380

9850 7480 6080 4610

8900 6770 5500 4170

8250 6270 5100 3870

8000 6080 4930 3750

7580 5750 4670 3550

3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4

B22459 B22463 B22464 B224M90 B224M100

8000 20000 40000 100000

.... .... 18800 14200

.... 18800 15200 11600

.... 15200 12400 9420

17800 13500 11000 8340

15200 11600 9420 7160

13800 10400 8520 6470

12800 9730 7900 6000

12400 9420 7650 5810

25

30

35

40

45 50

55

60

65 70 75

80 85

90 100

Bearing size number

3500 1230 941 764 580

For radial load ratings of 4³⁄₁₆” through 5" (110 mm through 125 mm), see series B22500 page D-34. If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp.

D-8

Spherical Roller Bearing Pillow Blocks

P-B22400H, PE-B22400H Cast Iron Housing 2-bolt Base Fixed or Expansion Self-aligning Spring Locking Collar Factory Adjusted and Sealed

Fixed

Expansion

Dimensions (inches/mm) Shaft dia. mm inches

Pillow block number Fixed

1

P-B22416H P-B224M25H

PE-B22416H PE-B224M25H

1³⁄₁₆ 1¹⁄₄

P-B22419H P-B22420H P-B224M30H

PE-B22419H PE-B22420H PE-B224M30H

P-B22423H P-B22424H P-B224M35H

PE-B22423H PE-B22424H PE-B224M35H

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

P-B22426H P-B22427H P-B22428H P-B224M40H

PE-B22426H PE-B22427H PE-B22428H PE-B224M40H

1¹⁵⁄₁₆ 2

P-B22431H P-B22432H P-B224M45H P-B224M50H

PE-B22431H PE-B22432H PE-B224M45H PE-B224M50H

2³⁄₁₆ 2¹⁄₄

P-B22435H P-B22436H P-B224M55H

2⁷⁄₁₆ 2¹⁄₂ 2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3

25

30 1⁷⁄₁₆ 1¹⁄₂ 35

40

45 50

55

60

65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4 90 100 3¹⁵⁄₁₆ 4

A †

Expansion

1⁹⁄₁₆ 39.67

B

C

D

4³⁄₈ 5¹⁵⁄₁₆ 2⁹⁄₁₆ 111.1 150.8 65.09

1³⁄₄

4³⁄₄

44.45

120.6 160.3 68.26

6⁵⁄₁₆

1⁷⁄₈

5

47.62

127.0 174.6 73.02

53.98

7³⁄₈

Fixed

³⁄₈ 10

⁷⁄₈ 22.2

3¹⁄₈ 79.4

M

P

S

U

W X

Unit wt. (lbs./kg.)

¹⁷⁄₃₂ 13.5

⁵⁄₈ 15.9

1⁹⁄₁₆ 39.7

1²⁹⁄₃₂ 48.4

5 6 6

Expansion 3⁵⁄₁₆ 84.1

2 50.8

2³⁄₁₆

³⁄₈

1¹⁄₁₆

3¹⁄₂

3⁵⁄₈

2³⁄₁₆

¹⁷⁄₃₂

⁵⁄₈

1⁵⁄₈

1³¹⁄₃₂

55.6

10

27.0

88.9

92.1

55.6

13.5

15.9

41.3

50.0

2¹⁄₄

¹⁄₂

1³⁄₁₆

3¹¹⁄₁₆

3⁷⁄₈

2¹⁄₂

²¹⁄₃₂

¹³⁄₁₆

1²⁵⁄₃₂ 2³⁄₁₆

57.2

12

30.2

93.7

98.4

63.5

16.7

20.6

45.2

4¹⁄₄

4³⁄₈

2³⁄₄

²¹⁄₃₂

¹³⁄₁₆

1²⁹⁄₃₂ 2¹⁄₄

139.7 187.3 79.38

63.5

12

33.3

108.0

111.1

69.8

16.7

20.6

48.4

2¹⁄₄

6¹⁄₄

2¹⁄₂

⁵⁄₈

1³⁄₈

4⁹⁄₁₆

4⁹⁄₁₆

2¹⁵⁄₁₆

²¹⁄₃₂

¹⁵⁄₁₆

1²⁹⁄₃₂ 2⁹⁄₃₂

57.15

158.8 212.7 79.38

63.5

16

34.9

115.9

115.9

74.6

16.7

23.8

48.4

57.9

PE-B22435H PE-B22436H PE-B224M55H

2¹⁄₂

6³⁄₄

2⁹⁄₁₆

⁵⁄₈

1⁵⁄₈

5

5

3³⁄₈

²⁵⁄₃₂

¹⁵⁄₁₆

2¹⁄₁₆

2⁷⁄₁₆

63.50

171.4 225.4 84.14

65.1

16

41.3

127.0

127.0

85.7

19.8

23.8

52.4

61.9

P-B22439H P-B22440H P-B224M60H

PE-B22439H PE-B22440H PE-B224M60H

2³⁄₄

7¹⁄₈

2¹¹⁄₁₆

⁵⁄₈

1⁵⁄₈

5¹⁄₂

5¹⁄₂

3⁵⁄₈

²⁷⁄₃₂

¹⁵⁄₁₆

2³⁄₁₆

2⁹⁄₁₆

69.85

181.0 235.0 88.90

68.3

16

41.3

139.7

139.7

92.1

21.4

23.8

55.6

65.1

P-B22443H P-B22444H P-B22447H P-B22448H P-B224M65H P-B224M70H P-B224M75H

PE-B22443H PE-B22444H PE-B22447H PE-B22448H PE-B224M65H PE-B224M70H PE-B224M75H

3¹⁄₄

8¹⁄₈

3³⁄₁₆

³⁄₄

2

6⁷⁄₁₆

6⁷⁄₁₆

4³⁄₁₆

²⁷⁄₃₂

1¹⁄₁₆

2⁷⁄₁₆

2²⁵⁄₃₂

82.55

206.4 265.1 101.60 81.0

20

57.2

163.5

163.5

106.4 21.4

27.0

61.9

70.6

P-B22451H P-B22455H P-B22456H P-B224M80H P-B224M85H

PE-B22451H PE-B22455H PE-B22456H PE-B224M80H PE-B224M85H

3³⁄₄

10

3⁷⁄₁₆

⁷⁄₈

2¹⁄₄

7¹⁄₂

7¹⁄₂

5

1⁵⁄₈

2²¹⁄₃₂ 3

95.25

254.0 330.2 111.12 87.3

24

57.2

190.5

190.5

127.0 23.8

41.3

67.5

76.2

P-B22459H P-B22463H P-B22464H P-B224M90H P-B224M100H


4¹⁄₄

11³⁄₄

1

2⁵⁄₈

8¹⁄₂

8¹⁄₂

5²⁹⁄₃₂

2¹⁄₄

3¹⁄₁₆

3⁷⁄₁₆

107.95

298.4 387.4 128.59 101.6

24

66.7

215.9

215.9

150.0 27.0

57.2

77.8

87.3

4¹⁄₈ 104.78

10⁷⁄₈ 14¹⁄₄ 5¹⁄₁₆ 4 276.2 362.0 128.59 101.6

1 24

2¹⁄₂ 63.5

8³⁄₈ 212.7

— —

5²⁹⁄₃₂ 1¹⁄₁₆ 150.0 27.0

1⁷⁄₈ 47.6

3¹⁄₁₆ 77.8

3⁷⁄₁₆ 87.3

8⁷⁄₈

9¹⁄₄

3¹⁄₈

3⁵⁄₁₆

3¹⁄₂

10⁷⁄₁₆ 4

13

15¹⁄₄

4³⁄₈

5¹⁄₁₆

4

¹⁵⁄₁₆

1¹⁄₁₆

2.1

2.9 7 7

55.6

1⁵⁄₁₆

8³⁄₈

3¹⁄₈

H L

¹⁄₂

— —

5¹⁄₂

2⁷⁄₈

2¹⁄₁₆ 52.4

L

F Bolts

2¹⁄₂

PL-B22463H PL-B22464H

2¹⁄₈

6⁷⁄₈

2¹¹⁄₁₆

E

57.2

3.2 10 10 10 4.7 12 12 5.5 5.2 14 14 6.5 17 17 8.0 29 29 27 27 13.2 13.0 12.5 43 42 41 19.6 19.1 61 59 59 28.7 26.9 58 57

Bold face items are normally available from stock; please consult for availability of non-stock items. X Width dimension for closed end unit. For replacement bearing numbers, see pages D-62, D-63. Selection guide, page D-5, D-6. Lubrication fitting tap size, ¹⁄₈" PT. Load ratings, pages D-7, D-8. All units available with type E lip seals. Additional information, page D-68. * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. † Tolerance, ±.005" (± 0.13 mm). L Dimension H for PE-B22439H and PE-B22440H is 1³⁄₄"; Dimension H for PE-B22443H thru PE-B22448H is 2¹⁄₄".

D-9


P-B22400FH, PE-B22400FH Cast Iron Housing 4-bolt Base Fixed or Expansion Self-aligning Spring Locking Collar Factory Adjusted and Sealed

Fixed

Expansion

Dimensions (inches/mm) Shaft dia. mm inches 1¹⁵⁄₁₆ 2 45 50 2³⁄₁₆ 2¹⁄₄ 55 2⁷⁄₁₆ 2¹⁄₂ 60 2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3 65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4 90 100 4³⁄₁₆ 4⁷⁄₁₆ 4¹⁄₂ 110 115 4¹⁵⁄₁₆ 5 125


Expansion

P-B22431FH PE-B22431FH P-B22432FH PE-B22432FH P-B224M45FH PE-B224M45FH P-B224M50FH PE-B224M50FH P-B22435FH PE-B22435FH P-B22436FH PE-B22436FH P-B224M55FH PE-B224M55FH P-B22439FH PE-B22439FH P-B22440FH PE-B22440FH P-B224M60FH PE-B224M60FH P-B22443FH PE-B22443FH P-B22444FH PE-B22444FH P-B22447FH PE-B22447FH P-B22448FH PE-B22448FH P-B224M65FH PE-B224M65FH P-B224M70FH PE-B224M70FH P-B224M75FH PE-B224M75FH P-B22451FH PE-B22451FH P-B22455FH PE-B22455FH P-B22456FH PE-B22456FH P-B224M80FH PE-B224M80FH P-B224M85FH PE-B224M85FH P-B22459FH PE-B22459FH P-B22463FH PE-B22463FH P-B22464FH PE-B22464FH P-B224M90FH PE-B224M90FH P-B224M100FH PE-B224M100FH P-B22567FHi PE-B22567FHi P-B22571FHi PE-B22571FHi P-B22572FHi PE-B22572FHi P-B225M110FH i PE-B225M110FH i P-B225M115FH i PE-B225M115FH i P-B22579FHi PE-B22579FHi P-B22580FHi PE-B22580FHi P-B225M125FH i PE-B225M125FH i

A †

B

C

2¹⁄₄

6¹⁄₄

8³⁄₈

57.15

F Bolts

G

H

L

M

P

S

3³⁄₁₆

¹⁄₂

1¹⁹⁄₃₂

1³⁄₈

4⁹⁄₁₆

2¹⁵⁄₁₆

²¹⁄₃₂

¹³⁄₁₆

1²⁹⁄₃₂ 2⁹⁄₃₂

158.8 212.7 79.38

81.0

12

40.5

34.9

115.9 74.6

16.7

20.6

48.4

57.9

2¹⁄₂

6³⁄₄

3¹⁄₄

¹⁄₂

1¹¹⁄₁₆

1⁵⁄₈

5

²⁵⁄₃₂

¹³⁄₁₆

2¹⁄₁₆

2⁷⁄₁₆

63.50

171.4 225.4 84.14

82.6

12

42.9

41.3

127.0 85.7

19.8

20.6

52.4

61.9

8⁷⁄₈

3¹⁄₈

3⁵⁄₁₆

2³⁄₄

7¹⁄₈

69.85

181.0 235.0 88.90

3¹⁄₄

8¹⁄₈

82.55

9¹⁄₄

D

3¹⁄₂

3³⁄₈

3³⁄₈

¹⁄₂

1³⁄₄

1³⁄₄

5¹⁄₂

85.7

12

44.4

44.4

139.7 92.1

⁵⁄₈

1⁷⁄₈

2¹⁄₄

6⁷⁄₁₆

206.4 265.1 101.60 95.2

16

47.6

57.2

3³⁄₄

10

³⁄₄

2

95.25

254.0 330.2 111.12 104.8

20

4¹⁄₄

12¹⁄₂

²⁷⁄₃₂

¹³⁄₁₆

2³⁄₁₆

2⁹⁄₁₆

21.4

20.6

55.6

65.1

2⁷⁄₁₆

2²⁵⁄₃₂

163.5 106.4

21.4

23.8

61.9

70.6

2¹⁄₄

7¹⁄₂

¹⁵⁄₁₆

1¹⁄₂

2²¹⁄₃₂ 3

50.8

57.2

190.5 127.0

23.8

38.1

67.5

76.2

³⁄₄

2¹⁄₄

2⁵⁄₈

8¹⁄₂

1¹⁄₁₆

1¹⁄₄

3¹⁄₁₆

3⁷⁄₁₆

107.95 317.5 387.4 128.59 114.3

20

57.2

66.7

215.9 150.0

27.0

31.8

77.8

87.3

4³⁄₄

³⁄₄

2¹⁄₂

2³⁄₄

9³⁄₈

1¹⁄₈

1³⁄₈

3³⁄₈

3³⁄₄

120.65 342.9 419.1 171.45 120.6

20

63.5

69.8

238.1 155.6

28.6

34.9

85.7

95.2

5¹⁄₂

⁷⁄₈

2³⁄₄

3

10⁷⁄₈

1⁷⁄₃₂

1¹⁄₂

3⁵⁄₈

4

24

69.8

76.2

276.2 174.6

31.0

38.1

92.1

101.6

15¹⁄₂

15¹⁄₄

16¹⁄₂

18¹⁄₂

4³⁄₈

5¹⁄₁₆

6³⁄₄

7¹⁄₄

4¹⁄₈

4¹⁄₂

4³⁄₄

5³⁄₈

139.70 393.7 469.9 184.15 136.5

4³⁄₁₆

W X

¹⁵⁄₁₆

13

3³⁄₄

3⁵⁄₈

U

²⁷⁄₃₂

13¹⁄₂

10⁷⁄₁₆ 4

E

5

5²⁹⁄₃₂

6¹⁄₈

6⁷⁄₈

Unit wt. (lbs./kg.) 13 13 6.3 5.9 15 15 6.9 19 19 8.6 30 30 29 28 13.7 13.5 13.0 45 43 43 20.5 20.0 69 67 66 32.1 30.3 92 88 87 40.7 39.5 129 128 58.1

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62 through D-65. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. † Tolerance, ±.005" (± 0.13 mm). * Expansion unit allows axial movement of ³⁄₁₆” (4.8 mm) in either direction from centered position shown. p Series P-B22500FH pillow blocks have two spring locking collars (bearing dimensions, page D-40, load ratings, pages D-33, D-34). X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-10


EP-B22400H, EPE-B22400H Cast Iron Housing 2-Bolt Base Fixed or Expansion Self-aligning Spring Locking Collar Factory Adjusted and Sealed

Self-Aligning Type E Interchange Fixed

Expansion

Dimensions (inches/mm) Shaft dia. mm inches 1⁷⁄₁₆ 35 1¹⁄₂ 1⁵⁄₈ 1¹¹⁄₁₆ 40 1³⁄₄ 1¹⁵⁄₁₆ 2 45 50 2³⁄₁₆ 55 2¹⁄₄ 2⁷⁄₁₆ 2¹⁄₂ 60 2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3 65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85

Pillow block number Fixed Expansion EP-B22423H EP-B224M35H EP-B224B24H EP-B22426H EP-B22427H EP-B224M40H EP-B224B28H EP-B22431H EP-B22432H EP-B224M45H EP-B224M50H EP-B22435H EP-B224M55H EP-B224B36H EP-B22439H EP-B22440H EP-B224M60H EP-B22443H EP-B22444H EP-B22447H EP-B22448H EP-B224M65H EP-B224M70H EP-B224M75H EP-B22451H EP-B22455H EP-B22456H EP-B224M80H EP-B224M85H

EPE-B22423H EPE-B224M35H EPE-B224B24H EPE-B22426H EPE-B22427H EPE-B224M40H EPE-B224B28H EPE-B22431H EPE-B22432H EPE-B224M45H EPE-B224M50H EPE-B22435H EPE-B224M55H EPE-B224B36H EPE-B22439H EPE-B22440H EPE-B224M60H EPE-B22443H EPE-B22444H EPE-B22447H EPE-B22448H EPE-B224M65H EPE-B224M70H EPE-B224M75H EPE-B22451H EPE-B22455H EPE-B22456H EPE-B224M80H EPE-B224M85H

A † 1⁷⁄₈ 47.62

B min. 4³⁄₄ 120.6

C

D

E

F Bolts

H

L

7³⁄₈ 187.3

2⁷⁄₈ 73.02

2¹⁄₄ 57.2

¹⁄₂ 12

1¹⁄₈ 28.6

3⁷⁄₈ 98.4

max. 6 152.4

2¹⁄₂ 63.5

2¹⁄₈

5¹⁄₄

6¹⁄₂

7⁷⁄₈

3¹⁄₈

2¹⁄₂

¹⁄₂

1¹⁄₄

4³⁄₈

53.98

133.4

165.1

200.0

79.38

63.5

12

31.8

111.1 69.8

2¹⁄₄

6¹⁄₁₆

7¹⁄₄

8⁷⁄₈

3¹⁄₈

2¹⁄₂

⁵⁄₈

1⁵⁄₁₆

4⁹⁄₁₆

57.15

154.0

184.2

225.4

79.38

63.5

16

33.3

2¹⁄₂ 63.50

6⁹⁄₁₆ 166.7

8 203.2

9⁵⁄₈ 244.5

3⁵⁄₁₆ 84.14

2⁹⁄₁₆ 65.1

⁵⁄₈ 16

1¹⁄₂ 38.1

2³⁄₄

2¹⁵⁄₁₆

P

U

W X

²¹⁄₃₂ 16.7

1²⁵⁄₃₂ 45.2

2³⁄₁₆ 55.6

8 12 11 11

²¹⁄₃₂

1²⁹⁄₃₂

2¹⁄₄

16.7

48.4

57.2

Unit wt. (lbs./kg.) 3.1

5.4 12 12 12

²¹⁄₃₂

1²⁹⁄₃₂

2⁹⁄₃₂

115.9 74.6

16.7

48.4

57.9

5 3³⁄₈ 127.0 85.7

²⁵⁄₃₂ 19.8

2¹⁄₁₆ 52.4

2⁷⁄₁₆ 61.9

15 18 17 17

2³⁄₄

6¹⁵⁄₁₆

8³⁄₄

10¹⁄₂

3¹⁄₂

2¹¹⁄₁₆

⁵⁄₈

1⁵⁄₈

5¹⁄₂

69.85

176.2

222.2

266.7

88.90

68.3

16

41.3

139.7 92.1

3¹⁄₈

7¹³⁄₁₆

9³⁄₄

11¹³⁄₁₆

4

3³⁄₁₆

³⁄₄

1⁷⁄₈

6⁵⁄₁₆

79.38

198.4

247.6

300.0

101.60

81.0

20

47.6

3³⁄₄

9⁵⁄₁₆

11⁵⁄₁₆

13¹³⁄₁₆

4³⁄₈

3¹⁄₂

⁷⁄₈

95.25

236.5

287.3

350.8

111.12

88.9

24

3⁵⁄₈

4³⁄₁₆

²⁷⁄₃₂

2³⁄₁₆

2⁹⁄₁₆

21.4

55.6

65.1

2⁷⁄₁₆

2²⁵⁄₃₂

160.3 106.4 21.4

61.9

70.6

2¹⁄₄

7¹⁄₂

2²¹⁄₃₂

3

57.2

190.5 127.0 23.8

67.5

76.2

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62, D-63. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. † Tolerance, ±.005" (± 0.13 mm). X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-11

M

5

²⁷⁄₃₂

¹⁵⁄₁₆

5.5 5.2 6.6

8.2 29 29 27 27 13.5 13.3 12.8 44 43 42 20.0 19.5


EP-B22400FH, EPE-B22400FH Cast Iron Housing 4-Bolt Base Fixed or Expansion Self-aligning Spring Locking Collar Factory Adjusted and Sealed

Self-Aligning Type E Interchange Fixed

Expansion


60

65 70 75

80 85

90 100

110 115

125

Pillow block number Fixed Expansion

2¹⁄₄ EP-B224B36FH 2⁷⁄₁₆ EP-B22439FH 2¹⁄₂ EP-B22440FH EP-B224M60FH 2¹¹⁄₁₆ EP-B22443FH 2³⁄₄ EP-B22444FH 2¹⁵⁄₁₆ EP-B22447FH 3 EP-B22448FH EP-B224M65FH EP-B224M70FH EP-B224M75FH 3³⁄₁₆ EP-B22451FH 3⁷⁄₁₆ EP-B22455FH 3¹⁄₂ EP-B22456FH EP-B224M80FH EP-B224M85FH 3¹¹⁄₁₆ P-B22459FH 3¹⁵⁄₁₆ P-B22463FH 4 P-B22464FH P-B224M90FH P-B224M100FH 4³⁄₁₆ P-B22567FHi 4⁷⁄₁₆ P-B22571FHi 4¹⁄₂ P-B22572FHi P-B225M110FH i P-B225M115FH i 4¹⁵⁄₁₆ P-B22579FHi 5 P-B22580FHi P-B225M125FH i

EPE-B224B36FH EPE-B22439FH EPE-B22440FH EPE-B224M60FH EPE-B22443FH EPE-B22444FH EPE-B22447FH EPE-B22448FH EPE-B224M65FH EPE-B224M70FH EPE-B224M75FH EPE-B22451FH EPE-B22455FH EPE-B22456FH EPE-B224M80FH EPE-B224M85FH PE-B22459FH PE-B22463FH PE-B22464FH PE-B224M90FH PE-B224M100FH PE-B22567FHi PE-B22571FHi PE-B22572FHi PE-B225M110FH i PE-B225M115FH i PE-B22579FHi PE-B22580FHi PE-B225M125FH i

A †

B min.

C

D

E

F Bolts

G

H

3⁵⁄₈

⁵⁄₈

1⁷⁄₈

1⁵⁄₈

92.1

16

47.6

41.3 139.7

max.

2³⁄₄

6¹⁵⁄₁₆

8³⁄₄

10¹⁄₂

3¹⁄₂

69.85

176.2

222.2

266.7 88.90

3¹⁄₈

7¹³⁄₁₆

9⁷⁄₈

11¹³⁄₁₆ 4

4¹⁄₄

⁵⁄₈

2¹⁄₈

1⁷⁄₈

79.38

198.4

250.8

300.0 101.60

108.0

16

54.0

3³⁄₄

9⁵⁄₁₆

11⁵⁄₁₆

13¹³⁄₁₆ 4³⁄₈

4³⁄₄

³⁄₄

95.25

236.5

290.5

350.8 111.12

120.6

4¹⁄₄

11⁷⁄₈

13

15¹⁄₄

107.95 301.6

330.2

4³⁄₄

L

5¹⁄₂

P

U

W X

3⁵⁄₈

²⁷⁄₃₂

2³⁄₁₆ 2⁹⁄₁₆

92.1

21.4

55.6 65.1

4³⁄₁₆

²⁷⁄₃₂

2⁷⁄₁₆ 2²⁵⁄₃₂

47.6 160.3

106.4

21.4

61.9 70.6

2³⁄₈

2¹⁄₄

5

¹⁵⁄₁₆

2²¹⁄₃₂ 3

20

60.3

57.2 190.5

127.0

23.8

67.5 76.2

4¹⁄₂

³⁄₄

2¹⁄₄

2⁵⁄₈

5²⁹⁄₃₂

1¹⁄₁₆

3¹⁄₁₆ 3⁷⁄₁₆

387.4 128.59

114.3

20

57.2

66.7 215.9

150.0

27.0

77.8 87.3

14¹⁄₈

16¹⁄₂

4³⁄₄

³⁄₄

2¹⁄₂

2³⁄₄

6¹⁄₈

1¹⁄₈

3³⁄₈

120.65 323.8

358.8

419.1 171.45

120.6

20

63.5

69.8 238.1

155.6

28.6

85.7 95.2

5¹⁄₂

16¹⁄₈

18¹⁄₂

5³⁄₈

⁷⁄₈

2³⁄₄

3

6⁷⁄₈

1⁷⁄₃₂

3⁵⁄₈

409.6

469.9 184.15

136.5

24

69.8

76.2 276.2

174.6

31.0

92.1 101.6

12³⁄₄

14⁵⁄₁₆

139.70 363.5

5¹⁄₁₆

6³⁄₄

7¹⁄₄

6⁵⁄₁₆

M

7¹⁄₂

8¹⁄₂

9³⁄₈

10⁷⁄₈

Unit wt. (lbs./kg.) 21 20 20 8.8 31 31 29 29 14.0 13.8 13.3 47 46 45 21.3 20.8 69 67 66 32.1 30.3 92 88 87

3³⁄₄

4

40.7 39.5 129 128 58.1

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62 through D-65. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. † Tolerance, ±.005" (±0.13 mm). v Series P-B22500FH pillow blocks have two spring locking collars (bearing dimensions, page D-40, load ratings, pages D-33, D-34). X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-12


PK-B22400H, PKE-B22400H Cast Steel Housing 2-Bolt Base Fixed or Expansion Self-aligning Spring Locking Collar Factory Adjusted and Sealed

Fixed

Expansion

Dimensions (inches/mm) Shaft dia. mm inches 1³⁄₁₆ 1¹⁄₄ 30 1⁷⁄₁₆ 1¹⁄₂ 35 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 40 1¹⁵⁄₁₆ 2 45 50 2³⁄₁₆ 2¹⁄₄ 55 2⁷⁄₁₆ 2¹⁄₂ 60 2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3 65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4 90 100

Pillow block number Fixed PK-B22419H PK-B22420H PK-B224M30H PK-B22423H PK-B22424H PK-B224M35H PK-B22426H PK-B22427H PK-B22428H PK-B224M40H PK-B22431H PK-B22432H PK-B224M45H PK-B224M50H PK-B22435H PK-B22436H PK-B224M55H PK-B22439H PK-B22440H PK-B224M60H PK-B22443H PK-B22444H PK-B22447H PK-B22448H PK-B224M65H PK-B224M70H PK-B224M75H PK-B22451H PK-B22455H PK-B22456H PK-B224M80H PK-B224M85H PK-B22459H PK-B22463H PK-B22464H PK-B224M90H PK-B224M100H

Expansion ... ... ... PKE-B22423H PKE-B22424H PKE-B224M35H PKE-B22426H PKE-B22427H PKE-B22428H PKE-B224M40H PKE-B22431H PKE-B22432H PKE-B224M45H PKE-B224M50H PKE-B22435H PKE-B22436H PKE-B224M55H PKE-B22439H PKE-B22440H PKE-B224M60H PKE-B22443H PKE-B22444H PKE-B22447H PKE-B22448H PKE-B224M65H PKE-B224M70H PKE-B224M75H PKE-B22451H PKE-B22455H PKE-B22456H PKE-B224M80H PKE-B224M85H PKE-B22459H PKE-B22463H PKE-B22464H PKE-B224M90H PKE-B224M100H

A † 1³⁄₄

B 4³⁄₄

C 6⁵⁄₁₆

D 2¹¹⁄₁₆

E 2³⁄₁₆

F Bolts

H

³⁄₈

1¹⁄₁₆

L

M

P

3¹⁄₂

3⁵⁄₈

2³⁄₁₆

¹⁷⁄₃₂

⁵⁄₈

U

W X

1⁵⁄₈

1³¹⁄₃₂

44.45

120.6 160.3 68.26

55.6

10

27.0

88.9

92.1

55.6

13.5

15.9 41.3

50.0

1⁷⁄₈

5

2¹⁄₄

¹⁄₂

1³⁄₁₆

3¹¹⁄₁₆

3⁷⁄₈

2¹⁄₂

²¹⁄₃₂

¹³⁄₁₆

1²⁵⁄₃₂

2³⁄₁₆

47.62

127.0 174.6 73.02

57.2

12

30.2

93.7

98.4

63.5

16.7

20.6 45.2

55.6

2¹⁄₈

5¹⁄₂

53.98 2¹⁄₄ 57.15

6⁷⁄₈

7³⁄₈

2⁷⁄₈

2¹⁄₂

¹⁄₂

1⁵⁄₁₆

4¹⁄₄

4³⁄₈

2³⁄₄

²¹⁄₃₂

¹³⁄₁₆

139.7 187.3 79.38

63.5

12

33.3

108.0

111.1

69.8

16.7

20.6 48.4

57.2

6¹⁄₄

2¹⁄₂

⁵⁄₈

1³⁄₈

4⁹⁄₁₆

4⁹⁄₁₆

2¹⁵⁄₁₆

²¹⁄₃₂

¹⁵⁄₁₆

1²⁹⁄₃₂

2⁹⁄₃₂

158.8 212.7 79.38

63.5

16

34.9

115.9

115.9

74.6

16.7

23.8 48.4

57.9

2¹⁄₂

6³⁄₄

2⁹⁄₁₆

⁵⁄₈

1⁵⁄₈

5

5

3³⁄₈

²⁵⁄₃₂

¹⁵⁄₁₆

2¹⁄₁₆

2⁷⁄₁₆

63.50

171.4 225.4 84.14

65.1

16

41.3

127.0

127.0

85.7

19.8

23.8 52.4

61.9

2³⁄₄

7¹⁄₈

2¹¹⁄₁₆

⁵⁄₈

1³⁄₄

5¹⁄₂

5¹⁄₂

3⁵⁄₈

²⁷⁄₃₂

¹⁵⁄₁₆

2³⁄₁₆

2⁹⁄₁₆

69.85

181.0 235.0 88.90

68.3

16

44.4

139.7

139.7

92.1

21.4

23.8 55.6

65.1

8³⁄₈

8⁷⁄₈ 9¹⁄₄

10⁷⁄₁₆

3¹⁄₈

3¹⁄₈

3⁵⁄₁₆ 3¹⁄₂

3¹⁄₄

8¹⁄₈

3³⁄₁₆

³⁄₄

2¹⁄₄

6⁷⁄₁₆

6⁷⁄₁₆

4³⁄₁₆

82.55

206.4 265.1 101.60 81.0

20

57.2

163.5

163.5

3³⁄₄

10

⁷⁄₈

2¹⁄₄

7¹⁄₂

95.25

254.0 330.2 111.12 87.3

24

57.2

4¹⁄₄

11³⁄₄

1 24

13

15¹⁄₄

4

4³⁄₈

5¹⁄₁₆

3⁷⁄₁₆

4

107.95 298.4 387.4 128.59 101.6

²⁷⁄₃₂

2¹⁄₄

2²⁵⁄₃₂

106.4 21.4

27.0 61.9

70.6

7¹⁄₂

5

1⁵⁄₈

3

190.5

190.5

127.0 23.8

41.3 67.5

76.2

2⁵⁄₈

8¹⁄₂

8¹⁄₂

5²⁹⁄₃₂

2¹⁄₄

3¹⁄₁₆

3⁷⁄₁₆

66.7

215.9

215.9

150.0 27.0

57.2 77.8

87.3

¹⁵⁄₁₆

1¹⁄₁₆

1¹⁄₁₆

1²⁹⁄₃₂

2⁷⁄₁₆

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62, D-63. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. † Tolerance, ±.005" (± 0.13 mm). * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-13

S

Fixed Expansion

2²¹⁄₃₂

Unit wt. (lbs./kg.) 7 7 3.2 7 7 3.4 10 10 10 4.8 12 12 5.8 5.5 16 16 7.1 19 18 8.6 30 30 29 28 13.7 13.5 13.0 45 43 43 20.2 19.7 64 62 62 29.9 28.1


PK-B22400FH, PKE-B22400FH PK-B22500FH, PKE-B22500FH Cast Steel Housing 4-Bolt Base Fixed or Expansion Self-aligning Spring Locking Collar Factory Adjusted and Sealed

Fixed

Expansion

Dimensions (inches/mm) Shaft dia. mm

45 50

55

60

65 70 75

80 85

90 100

110 115

125

inches


Expansion

1¹⁵⁄₁₆ PK-B22431FH PKE-B22431FH 2 PK-B22432FH PKE-B22432FH PK-B224M45FH PKE-B224M45FH PK-B224M50FH PKE-B224M50FH 2³⁄₁₆ PK-B22435FH PKE-B22435FH 2¹⁄₄ PK-B22436FH PKE-B22436FH PK-B224M55FH PKE-B224M55FH 2⁷⁄₁₆ PK-B22439FH PKE-B22439FH 2¹⁄₂ PK-B22440FH PKE-B22440FH PK-B224M60FH PKE-B224M60FH 2¹¹⁄₁₆ PK-B22443FH PKE-B22443FH 2³⁄₄ PK-B22444FH PKE-B22444FH 2¹⁵⁄₁₆ PK-B22447FH PKE-B22447FH 3 PK-B22448FH PKE-B22448FH PK-B224M65FH PKE-B224M65FH PK-B224M70FH PKE-B224M70FH PK-B224M75FH PKE-B224M75FH 3³⁄₁₆ PK-B22451FH PKE-B22451FH 3⁷⁄₁₆ PK-B22455FH PKE-B22455FH 3¹⁄₂ PK-B22456FH PKE-B22456FH PK-B224M80FH PKE-B224M80FH PK-B224M85FH PKE-B224M85FH 3¹¹⁄₁₆ PK-B22459FH PKE-B22459FH 3¹⁵⁄₁₆ PK-B22463FH PKE-B22463FH 4 PK-B22464FH PKE-B22464FH PK-B224M90FH PKE-B224M90FH PK-B224M100FH PKE-B224M100FH 4³⁄₁₆ PK-B22567FHi PKE-B22567FHi 4⁷⁄₁₆ PK-B22571FHi PKE-B22571FHi 4¹⁄₂ PK-B22572FHi PKE-B22572FHi PK-B225M110FH i PKE-B225M110FH i PK-B225M115FH i PKE-B225M115FH i 4¹⁵⁄₁₆ PK-B22579FHi PKE-B22579FHi 5 PK-B22580FHi PKE-B22580FHi PK-B225M125FH i PKE-B225M125FH i

A †

B

2¹⁄₄

6¹⁄₄

57.15

C

8³⁄₈

D

F Bolts

G

H

L

4⁹⁄₁₆

3³⁄₁₆

¹⁄₂

1¹⁹⁄₃₂ 1³⁄₈

158.8 212.7 79.38

81.0

12

40.5

2¹⁄₂

6³⁄₄

3¹⁄₄

¹⁄₂

1¹¹⁄₁₆ 1⁵⁄₈

63.50

171.4 225.4 84.14

82.6

12

42.9

8⁷⁄₈

3⁵⁄₁₆

2³⁄₄

7¹⁄₈

69.85

181.0 235.0 88.90

3¹⁄₄

8¹⁄₈

82.55

9¹⁄₄

3¹⁄₈

E

3³⁄₈

¹⁄₂

1³⁄₄

1³⁄₄

85.7

12

44.4

44.4 139.7

1⁷⁄₈

2¹⁄₄

206.4 265.1 101.60 95.2

16

47.6

3³⁄₄

10

³⁄₄

95.25

254.0 330.2 111.12 104.8

4¹⁄₄

12¹⁄₂

U

W X

2¹⁵⁄₁₆

²¹⁄₃₂

¹³⁄₁₆

1²⁹⁄₃₂ 2⁹⁄₃₂

74.6

16.7

20.6

48.4 57.9

3³⁄₈

²⁵⁄₃₂

¹³⁄₁₆

2¹⁄₁₆

85.7

19.8

20.6

52.4 61.9

2⁷⁄₁₆

3⁵⁄₈

²⁷⁄₃₂

¹³⁄₁₆

2³⁄₁₆

92.1

21.4

20.6

55.6 65.1

2⁹⁄₁₆

¹⁵⁄₁₆

2⁷⁄₁₆

57.2 163.5

106.4

21.4

23.8

61.9 70.6

2

2¹⁄₄

5

¹⁵⁄₁₆

1¹⁄₂

2²¹⁄₃₂ 3

20

50.8

57.2 190.5

127.0

23.8

38.1

67.5 76.2

³⁄₄

2¹⁄₄

2⁵⁄₈

5²⁹⁄₃₂

1¹⁄₁₆

1¹⁄₄

3¹⁄₁₆

107.95 317.5 387.4 128.59 114.3

20

57.2

66.7 215.9

150.0

27.0

31.8

77.8 87.3

4³⁄₄

³⁄₄

2¹⁄₂

2³⁄₄

6¹⁄₈

1¹⁄₈

1³⁄₈

3³⁄₈

120.65 342.9 419.1 171.45 120.6

20

63.5

69.8 238.1

155.6

28.6

34.9

85.7 95.2

5¹⁄₂

⁷⁄₈

2³⁄₄

3

6⁷⁄₈

1⁷⁄₃₂

1¹⁄₂

3⁵⁄₈

24

69.8

76.2 276.2

174.6

31.0

38.1

92.1 101.6

15¹⁄₂

15¹⁄₄

16¹⁄₂

18¹⁄₂

5¹⁄₁₆

6³⁄₄

7¹⁄₄

4¹⁄₈

4¹⁄₂

4³⁄₄

5³⁄₈

139.70 393.7 469.9 184.15 136.5

6⁷⁄₁₆

S

²⁷⁄₃₂

4³⁄₈

3³⁄₄

5¹⁄₂

P

4³⁄₁₆

13

4

5

41.3 127.0

⁵⁄₈

13¹⁄₂

10⁷⁄₁₆

3¹⁄₂

34.9 115.9

M

7¹⁄₂

8¹⁄₂

9³⁄₈

10⁷⁄₈

2²⁵⁄₃₂

3⁷⁄₁₆

3³⁄₄

4

Unit wt. (lbs./kg.)

13 13 6.1 5.8 16 16 7.3 20 20 9.3 30 30 29 28 13.7 13.5 13.0 49 47 47 22.0 21.5 76 74 73 35.2 33.5 97 93 92 43.0 41.7 125 124 56.6

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62 through D-65. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. † Tolerance, ±.005" (±0.13 mm). v Series P-B22500FH pillow blocks have two spring locking collars (bearing dimensions, page D-40, load ratings, pages D-33, D-34). * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-14

Spherical Roller Bearing Cartridge Units

C-B22400H Cast Iron Housing Self-aligning Spring Locking Collar Factory Adjusted and Sealed


Cartridge unit number

A †

B

D

L

M

P

U

W X

Unit wt. (lbs./kg.)

1

C-B22416H C-B224M25H

3.000 76.20

2¹⁄₁₆ 52.39

2⁹⁄₁₆ 65.09

2¹⁹⁄₃₂ 65.9

2 50.8

¹⁷⁄₃₂ 13.5

1⁹⁄₁₆ 39.7

1²⁹⁄₃₂ 48.4

3

1³⁄₁₆ 1¹⁄₄

C-B22419H C-B22420H C-B224M30H

4 4

inches

25

30 1⁷⁄₁₆ 1¹⁄₂ 35 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

C-B22426H C-B22427H C-B22428H C-B224M40H

1¹⁵⁄₁₆ 2

C-B22431H C-B22432H C-B224M45H C-B224M50H

40

45 50 2³⁄₁₆ 2¹⁄₄ 55

C-B22435H C-B22436H C-B224M55H

2⁷⁄₁₆ 2¹⁄₂

C-B22439H C-B22440H C-B224M60H

2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3

C-B22443H C-B22444H C-B22447H C-B22448H C-B224M65H C-B224M70H C-B224M75H

60

65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85

C-B22423H C-B22424H C-B224M35H

C-B22451H C-B22455H C-B22456H C-B224M80H C-B224M85H

3.219

2³⁄₁₆

2¹¹⁄₁₆

2²³⁄₃₂

2³⁄₁₆

¹⁷⁄₃₂

1⁵⁄₈

1³¹⁄₃₂

81.76

55.56

68.26

69.0

55.6

13.5

41.3

50.0

3.437

2¹⁄₄

2⁷⁄₈

2²⁹⁄₃₂

2¹⁄₂

²¹⁄₃₂

1²⁵⁄₃₂

2³⁄₁₆

87.30

57.15

73.02

73.8

63.5

16.7

45.2

55.6

3.937

2¹⁄₂

3¹⁄₈

3⁵⁄₃₂

2³⁄₄

²¹⁄₃₂

1²⁹⁄₃₂

2¹⁄₄

100.00

63.50

79.38

80.2

69.8

16.7

48.4

57.2

4.125

2¹⁄₂

3¹⁄₈

3⁵⁄₃₂

2¹⁵⁄₁₆

²¹⁄₃₂

1²⁹⁄₃₂

2⁹⁄₃₂

104.78

63.50

79.38

80.2

74.6

16.7

48.4

57.9

4.531

2⁹⁄₁₆

3⁵⁄₁₆

3¹¹⁄₃₂

3³⁄₈

²⁵⁄₃₂

2¹⁄₁₆

2⁷⁄₁₆

115.09

65.09

84.14

84.9

85.7

19.8

52.4

61.9

5.000

2¹¹⁄₁₆

3¹⁄₂

3¹⁷⁄₃₂

3⁵⁄₈

²⁷⁄₃₂

2³⁄₁₆

2⁹⁄₁₆

127.00

68.26

88.90

89.7

92.1

21.4

55.6

65.1

5.875

3³⁄₁₆

4

4¹⁄₃₂

4³⁄₁₆

²⁷⁄₃₂

2⁷⁄₁₆

2²⁵⁄₃₂

149.22

80.96

101.60

102.4

106.4

21.4

61.9

70.6

6.750

3⁷⁄₁₆

4³⁄₈

4³⁄₈

5

¹⁵⁄₁₆

2²¹⁄₃₂

3

171.45

87.31

111.12

111.1

127.0

23.8

67.5

76.2

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62, D-63. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. † Tolerance, +.000" –.002" (+0.00 mm –0.05 mm); bore tolerance for mounting +.002" –.000" (+0.05 mm –0.00 mm). X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-15

1.4

1.7 4 4 2.1 6 6 6 2.9 6 6 3.1 3.0 8 8 3.8 10 10 4.8 18 17 16 16 8.1 8.0 7.8 25 23 23 11.2 11.0


CSE-B22400H Steel Housing Fixed or Expansion Self-aligning Spring Locking Collar Factory Adjusted and Sealed

FixedG Location G

Expansion Location G


inches 1

CSE-B22416H CSE-B224M25H

1³⁄₁₆ 1¹⁄₄

CSE-B22419H CSE-B22420H CSE-B224M30H

25

30 1⁷⁄₁₆ 1¹⁄₂ 35


1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

CSE-B22426H CSE-B22427H CSE-B22428H CSE-B224M40H

1¹⁵⁄₁₆ 2

CSE-B22431H CSE-B22432H CSE-B224M45H CSE-B224M50H

40

45 50 2³⁄₁₆ 2¹⁄₄ 55


2⁷⁄₁₆ 2¹⁄₂


2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3

CSE-B22443H CSE-B22444H CSE-B22447H CSE-B22448H CSE-B224M65H CSE-B224M70H CSE-B224M75H

60

65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4 90 100

Cartridge unit number G

CSE-B22451H CSE-B22455H CSE-B22456H CSE-B224M80H CSE-B224M85H CSE-B22459H CSE-B22463H CSE-B22464H CSE-B224M90H CSE-B224M100H

A † 2.665 67.69

B

D

L

M

P

U

2 50.80

2⁹⁄₁₆ 65.09

2⁹⁄₁₆ 65.1

2 50.8

⁹⁄₁₆ 14.3

1⁹⁄₁₆ 39.7

3 4 4

2.915

2¹⁄₈

2¹¹⁄₁₆

2¹¹⁄₁₆

2³⁄₁₆

⁹⁄₁₆

1⁵⁄₈

74.04

53.98

68.26

68.3

55.6

14.3

41.3

3.124

2³⁄₁₆

2⁷⁄₈

2⁷⁄₈

2¹⁄₂

¹¹⁄₁₆

1²⁵⁄₃₂

79.35

55.56

73.02

73.0

63.5

17.5

45.2

3.636

2⁷⁄₁₆

3¹⁄₈

3¹⁄₈

2³⁄₄

¹¹⁄₁₆

1²⁹⁄₃₂

92.35

61.91

79.38

79.4

69.8

17.5

48.4

3.833

2²⁵⁄₆₄

3¹⁄₈

3¹⁄₈

2¹⁵⁄₁₆

¹¹⁄₁₆

1²⁹⁄₃₂

97.36

60.72

79.38

79.4

74.6

17.5

48.4

4.227

2¹⁄₂

3⁵⁄₁₆

3⁵⁄₁₆

3³⁄₈

¹³⁄₁₆

2¹⁄₁₆

107.36

63.50

84.14

84.1

85.7

20.6

52.4

4.621

2⁵⁄₈

3¹⁄₂

3¹⁄₂

3⁵⁄₈

⁷⁄₈

2³⁄₁₆

117.37

66.68

88.90

88.9

92.1

22.2

55.6

5.407

3¹⁄₈

4

4

4³⁄₁₆

⁷⁄₈

2⁷⁄₁₆

137.34

79.38

101.60

101.6

106.4

22.2

61.9

6.194

3⁷⁄₁₆

4³⁄₈

4³⁄₈

5

¹⁵⁄₁₆

2²¹⁄₃₂

157.33

87.31

111.12

111.1

127.0

23.8

67.5

7.375

4

5¹⁄₁₆

5¹⁄₁₆

5²⁹⁄₃₂

1¹⁄₁₆

3¹⁄₁₆

187.32

101.60

128.59

128.6

150.0

27.0

77.8

Unit wt. (lbs./kg.) 1.3

1.7 4 4 1.8 6 5 5 2.5 6 5 2.6 2.3 7 7 3.2 8 8 3.9 14 14 13 13 6.6 6.4 5.9 20 18 18 9.0 8.6 33 31 31 15.9 14.1

Bold face items are normally available from stock; please consult for availability of non-stock items. Steel cartridge units cannot be disassembled. For replacement, use entire new unit. For 4³⁄₁₆" through 5" (110 mm through 125 mm) CSE-B22500, see page D-39. All units available with type E lip seals. † Tolerance, +.000" –.002" (+0.00 mm –0.05 mm); bore tolerance for mounting +.002" –.000" (+0.05 mm –0.00 mm). * Plug diameter .531" (13.49 mm), engagement depth .125" ±.015" (3.18 ±0.38 mm), allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position on expansion units. G Hole for fixed location and slot for expansion location in the same housing. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-16

Spherical Roller Bearing Flanged Units

F-B22400H, FE-B22400H Cast Iron Housing 3-bolt or 4-bolt Mounting Fixed or Expansion Self-aligning Spring Locking Collar Factory Adjusted and Sealed


3-BOLT ROUND

Type Shaft dia. of inches Housing mm

F-B22416H F-B224M25H

FE-B22416H FE-B224M25H

2⁷⁄₈ 73.0

1³⁄₁₆ 1¹⁄₄

F-B22419H F-B22420H F-B224M30H

FE-B22419H FE-B22420H FE-B224M30H

1⁷⁄₁₆ 1¹⁄₂

F-B22423H F-B22424H F-B224M35H

FE-B22423H FE-B22424H FE-B224M35H

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

F-B22426H F-B22427H F-B22428H F-B224M40H

FE-B22426H FE-B22427H FE-B22428H FE-B224M40H

1¹⁵⁄₁₆ 2

F-B22431H F-B22432H F-B224M45H F-B224M50H

FE-B22431H FE-B22432H FE-B224M45H FE-B224M50H

4¹⁄₄

4¹⁄₂

5³⁄₄

4¹⁄₁₆

6¹¹⁄₁₆

108.0

114.3

146.05

103.17

2³⁄₁₆ 2¹⁄₄

F-B22435H F-B22436H F-B224M55H

FE-B22435H FE-B22436H FE-B224M55H

4⁷⁄₈

4⁷⁄₈

6³⁄₈

123.8

123.8

161.92

2⁷⁄₁₆ 2¹⁄₂

F-B22439H F-B22440H F-B224M60H

FE-B22439H FE-B22440H FE-B224M60H

F-B22443H F-B22444H F-B22447H F-B22448H F-B224M65H F-B224M70H F-B224M75H

FE-B22443H FE-B22444H FE-B22447H FE-B22448H FE-B224M65H FE-B224M70H FE-B224M75H

F-B22451H F-B22455H F-B22456H F-B224M80H F-B224M85H

FE-B22451H FE-B22455H FE-B22456H FE-B224M80H FE-B224M85H

F-B22459H F-B22463H F-B22464H F-B224M90H F-B224M100H

FE-B22459H FE-B22463H FE-B22464H FE-B224M90H FE-B224M100H

30

45 50

55

60 2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3 65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4

Exp

C G

1

40

4-BOLT ROUND

B

Fixed

35

4-BOLT SQUARE

A

Expansion

25

90 100

Flanged unit number Fixed

3¹⁄₄ 82.6

Circle

Square

4¹⁄₈ 104.78

... ...

D

4³⁄₄ 2⁹⁄₁₆ 120.6 65.09 2¹¹⁄₁₆

F G Bolts I ³⁄₈ 10

J X

¹⁄₃₂ ⁹⁄₁₆ 2¹⁵⁄₁₆ 0.8 14.3 74.6

M

2¹⁹⁄₃₂ 65.9

2 50.8

N

P I

3 6 6

3¹⁄₂

4¹⁄₂

...

5¹⁄₈

³⁄₈

¹⁄₃₂

3¹⁄₁₆

2²³⁄₃₂

2³⁄₁₆

5¹⁄₂

88.9

114.30

...

130.2 68.26

10

0.8 15.1 77.8

69.0

55.6

139.7 13.5

3⁷⁄₁₆

3³⁄₄

5

...

5⁷⁄₈

¹⁄₂

¹⁄₃₂

3⁵⁄₁₆

2²⁹⁄₃₂

2¹⁄₂

6¹⁄₄

87.3

95.2

127.00

...

149.2 73.02

12

0.8 15.9 84.1

73.8

63.5

158.8 16.7

3¹⁵⁄₁₆

4¹⁄₄

5¹⁄₂

3⁵⁷⁄₆₄

6³⁄₈

3¹⁄₈

100.0

108.0

139.70

98.83

161.9 79.38 3¹⁄₈

⁵⁄₈

¹⁄₂

¹⁄₃₂

⁵⁄₈

12

0.8 15.9 88.9

¹⁷⁄₃₂

²¹⁄₃₂

3⁵⁄₃₂

2³⁄₄

6³⁄₄

²¹⁄₃₂

80.2

69.8

171.4 16.7

¹⁄₂

¹⁄₁₆

3⁹⁄₁₆

3³⁄₁₆

2¹⁵⁄₁₆

7

169.9 79.38

12

1.6 17.5 90.5

81.0

74.6

177.8 16.7

4¹⁄₂

7³⁄₈

⁵⁄₈

³⁄₃₂

3²⁵⁄₃₂

3¹³⁄₃₂

3³⁄₈

7³⁄₄

114.30

187.3 84.14

16

2.4 17.5 96.0

86.5

85.7

196.8 19.8

3⁵⁄₁₆

5³⁄₈

5³⁄₈

6³⁄₄

4⁴⁹⁄₆₄

7³⁄₄

136.5

136.5

171.45

121.06

196.8 88.90

3¹⁄₂

4

¹¹⁄₁₆

3¹⁄₂

¹¹⁄₁₆

⁵⁄₈

³⁄₃₂

16

2.4 19.0 100.8 91.3

206.4 21.4

158.8

158.8

200.02

141.27

231.8 101.60 20

2.4 22.2 112.7 104.0 106.4 241.3 21.4

7³⁄₈

7³⁄₈

9¹⁄₂

6²³⁄₃₂

8⁵⁄₈

³⁄₁₆

187.3

187.3

241.30

170.64

219.1 111.12 20

4.8 34.9 124.6 115.9 127.0 290.5 23.8

8¹⁄₈

8³⁄₈

10³⁄₄

7³⁹⁄₆₄

9³⁄₄

⁵⁄₃₂

206.4

212.7

273.05

193.28

247.6 128.59 24

⁷⁄₈

1¹⁄₂

5⁵⁄₈

4⁹⁄₁₆

5⁷⁄₃₂

4³⁄₁₆

5

5²⁹⁄₃₂

9¹⁄₂

²⁷⁄₃₂

9¹⁄₈

4²⁹⁄₃₂

4³⁄₃₂

8¹⁄₈

92.1

5⁹⁄₁₆

1³⁄₈

4⁷⁄₁₆

3⁵⁄₈

7⁷⁄₈

5¹⁄₁₆

⁷⁄₈

3¹⁹⁄₃₂

²⁵⁄₃₂

6¹⁄₄

³⁄₄

³⁄₃₂

3³¹⁄₃₂

²¹⁄₃₂

6¹⁄₄

4³⁄₈

³⁄₄

³⁄₄

Unit wt. (lbs./kg.)

5¹⁄₈ ¹⁷⁄₃₂ 130.2 13.5

3¹⁄₈

2⁷⁄₈

¹⁹⁄₃₂

L I

79.4

²⁷⁄₃₂

11⁷⁄₁₆ ¹⁵⁄₁₆

12²⁹⁄₃₂ 1¹⁄₃₂

4.0 38.1 142.9 132.6 150.0 327.8 26.2

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62, D-63. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. V For expansion units, dimensions G, L, and P are minimum values. For maximum values, add .375" (9.5 mm). G Cross flat dimension for 3³⁄₁₆" and larger shaft. X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-17

H

1.3

2.4 7 7 3.2 9 9 9 4.3 10 10 5.0 4.7 14 14 6.5 17 17 7.9 28 27 26 26 12.7 12.5 12.0 41 39 39 18.6 18.1 59 57 57 27.7 25.9


EFR-B22400H Cast Iron Housing Padded Flange 4-bolt Mounting Self-aligning Spring Locking Collar Factory Adjusted and Sealed

Self-Aligning Type E Interchange


1⁷⁄₁₆

EFR-B22423H EFR-B224M35H

1¹⁄₂ 1⁵⁄₈ 1¹¹⁄₁₆

EFR-B224B24H EFR-B22426H EFR-B22427H EFR-B224M40H

1³⁄₄ 1¹⁵⁄₁₆ 2

EFR-B224B28H EFR-B22431H EFR-B22432H EFR-B224M45H EFR-B224M50H

35

40

45 50 2³⁄₁₆

EFR-B22435H EFR-B224M55H

2¹⁄₄ 2⁷⁄₁₆ 2¹⁄₂

EFR-B224B36H EFR-B22439H EFR-B22440H EFR-B224M60H

2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3

EFR-B22443H EFR-B22444H EFR-B22447H EFR-B22448H EFR-B224M65H EFR-B224M70H EFR-B224M75H

55

60

65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4 90 100

Flanged unit number

A

inches

EFR-B22451H EFR-B22455H EFR-B22456H EFR-B224M80H EFR-B224M85H EFR-B22459H EFR-B22463H EFR-B22464H EFR-B224M90H EFR-B224M100H

3³⁄₄ 95.2

B Circle 4⁶¹⁄₆₄ 125.81

Square 3¹⁄₂ 88.9

C

D

F Bolts

G

H

J X

L

M

N

4⁵⁄₈ 117.5

2⁷⁄₈ 73.02

¹⁄₂ 12

¹⁄₁₆ 1.6

1¹⁄₄ 31.8

4¹⁄₃₂ 102.4

2³¹⁄₃₂ 75.4

2¹⁄₂ 63.5

6¹⁄₁₆ 154.0

4¹⁄₄

5⁵³⁄₆₄

4¹⁄₈

5¹⁄₂

3¹⁄₈

¹⁄₂

¹⁄₈

1³⁄₈

4⁹⁄₃₂

3⁹⁄₃₂

2³⁄₄

7⁷⁄₃₂

108.0

148.03

104.8

139.7

79.38

12

3.2

34.9

108.7

83.3

69.8

183.4

Unit wt. (lbs./kg.) 8 3.4 11 11 10 5.1 11 11 10

4¹⁄₂

6³⁄₁₆

4³⁄₈

5¹⁄₂

3¹⁄₈

¹⁄₂

¹⁄₈

1⁷⁄₁₆

4⁵⁄₁₆

3⁹⁄₃₂

2¹⁵⁄₁₆

7⁵⁄₁₆

114.3

157.18

111.1

139.7

79.38

12

3.2

36.5

109.5

83.3

74.6

185.7

5 127.0

6⁵⁷⁄₆₄ 175.03

4⁷⁄₈ 123.8

6¹⁄₄ 158.8

3⁵⁄₁₆ 84.14

⁵⁄₈ 16

¹⁄₈ 3.2

1¹⁄₂ 38.1

4⁵⁄₈ 117.5

3¹⁵⁄₃₂ 88.1

3³⁄₈ 85.7

8⁹⁄₃₂ 210.3

15 18 17 17

5³⁄₈

7¹⁹⁄₃₂

5³⁄₈

6³⁄₄

3¹⁄₂

⁵⁄₈

³⁄₁₆

1¹¹⁄₁₆

4¹⁵⁄₁₆

3²³⁄₃₂

3⁵⁄₈

8³¹⁄₃₂

136.5

192.89

136.5

171.4

88.90

16

4.8

42.9

125.4

94.5

92.1

227.8

6¹⁄₄

8³¹⁄₆₄

6

7⁵⁄₈

4

³⁄₄

³⁄₁₆

1¹³⁄₁₆

5¹³⁄₃₂

4⁷⁄₃₂

4³⁄₁₆

10¹⁄₈

158.8

215.49

152.4

193.7

101.60

20

4.8

46.0

137.3

107.2

106.4

257.2

7³⁄₈

9⁵⁹⁄₆₄

7

8³⁄₄

4³⁄₈

³⁄₄

³⁄₃₂

1¹⁵⁄₁₆

5³⁄₄

4¹⁵⁄₃₂

5

11²¹⁄₃₂

187.3

251.23

177.8

222.2

111.12

20

2.4

49.2

146.0

113.5

127.0

296.1

8³⁄₈

10⁶¹⁄₆₄

7³⁄₄

9³⁄₄

5¹⁄₁₆

⁷⁄₈

³⁄₃₂

2³⁄₁₆

6⁵⁄₈

5³⁄₁₆

5²⁹⁄₃₂

12³¹⁄₃₂

212.7

278.21

196.8

247.6

128.59

24

2.4

55.6

168.3

131.8

150.0

329.4

5.3 5.0 7.1

7.9 26 25 24 24 11.7 11.5 11.0 42 41 40 18.9 18.4 58 56 56 27.2 25.4

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62, D-63. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-18

Spherical Roller Bearing Flanged Bracket Units

FB-B22400H High-Test Iron Housing 3-bolt or 4-bolt Mounting Self-aligning Spring Locking Collar Factory Adjusted and Sealed


3-BOLT

Type Shaft dia. of mm inches Housing

B

C

3⁷⁄₁₆

2³⁄₈

1¹⁄₄

87.3

60.3

31.8 73.02

FB-B22423H FB-B22424H FB-B224M35H

1¹⁵⁄₁₆ 2

FB-B22431H FB-B22432H FB-B224M45H FB-B224M50H

4¹⁄₄

2¹⁵⁄₁₆

1⁵⁄₈

108.0

74.6

2⁷⁄₁₆ 2¹⁄₂

FB-B22439H FB-B22440H FB-B224M60H

5³⁄₈ 136.5

2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3

FB-B22443H FB-B22444H FB-B22447H FB-B22448H FB-B224M65H FB-B224M70H FB-B224M75H

45 50

60 4-BOLT

A

1⁷⁄₁₆ 1¹⁄₂ 35

65 70 75

Flanged bracket unit number

D 2⁷⁄₈

3¹⁄₈

E

F Bolts

G

3¹⁄₄

¹⁄₂

¹⁄₃₂

82.6

12

0.8

J X

K

⁵⁄₈

3⁵⁄₁₆

4¹⁄₄

2²⁹⁄₃₂

2¹⁄₂

5³¹⁄₃₂

15.9

84.1

108.0

73.8

63.5

151.6 50.8

H

M

U

N 2

4

¹⁄₂

¹⁄₁₆

¹¹⁄₁₆

3⁹⁄₁₆

5³⁄₁₆

3³⁄₁₆

2¹⁵⁄₁₆

7⁵⁄₁₆

41.3 79.38

101.6

12

1.6

17.5

90.5

131.8

81.0

74.6

185.7 69.8

3³⁄₄

1³⁄₄

4⁷⁄₈

⁵⁄₈

³⁄₃₂

³⁄₄

3³¹⁄₃₂

6¹⁄₄

3¹⁹⁄₃₂

3⁵⁄₈

8¹⁵⁄₁₆

95.2

44.4 88.90

123.8

16

2.4

19.0

100.8

158.8

91.3

92.1

227.0 76.2

3¹⁄₂

6¹⁄₄

3⁷⁄₈

2¹⁄₄

4

5³⁄₄

158.8

98.4

57.2 101.60 146.0

³⁄₄

³⁄₃₂

⁷⁄₈

4⁷⁄₁₆

7

20

2.4

22.2

112.7

177.8

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62, D-63. Lubrication fitting tap size: for 1¹⁄₂ and smaller shafts, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. All units available with type E lip seals. X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-19

L

2³⁄₄

3

Unit wt. (lbs./kg.) 6.4 6.4 2.9 10.0 10.0 4.4 4.3 17.5 17.5 8.1

30.0 30.0 4³⁄₃₂ 4³⁄₁₆ 10¹⁄₈ 4 28.0 28.0 13.7 104.0 106.4 257.2 101.6 13.5 12.8

Spherical Roller Bearing Flanged Cartridge Units

FC-B22400H Cast Iron Housing Self-aligning Spring Locking Collar Factory Adjusted and Sealed Jack Screw Holes for Removal



inches 1

FC-B22416H FC-B224M25H

1³⁄₁₆ 1¹⁄₄

FC-B22419H FC-B22420H FC-B224M30H

25

30 1⁷⁄₁₆ 1¹⁄₂

FC-B22423H FC-B22424H FC-B224M35H

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

FC-B22426H FC-B22427H FC-B22428H FC-B224M40H

1¹⁵⁄₁₆ 2

FC-B22431H FC-B22432H FC-B224M45H FC-B224M50H

35

40

45 50 2³⁄₁₆ 2¹⁄₄

FC-B22435H FC-B22436H FC-B224M55H

2⁷⁄₁₆ 2¹⁄₂

FC-B22439H FC-B22440H FC-B224M60H

55

60 2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3 65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4 90 100

Flanged cartridge unit number

FC-B22443H FC-B22444H FC-B22447H FC-B22448H FC-B224M65H FC-B224M70H FC-B224M75H FC-B22451H FC-B22455H FC-B22456H FC-B224M80H FC-B224M85H FC-B22459H FC-B22463H FC-B22464H FC-B224M90H FC-B224M100H

A † 3.000 76.20

B Circle 3⁵⁄₈ 92.08

C

D

F Bolts

H

J

K

L

4³⁄₈ 111.1

2⁹⁄₁₆ 65.09

⁵⁄₁₆ 8

⁷⁄₁₆ 11.1

1¹⁄₄ 31.8

2¹⁄₃₂ 51.6

1⁹⁄₃₂ 32.5

Square 2⁹⁄₁₆ 65.1

2 50.8

U

Y X

¹⁷⁄₃₂ 13.5

⁵⁄₈ 15.9

1⁵⁄₈ 41.3

4

1⁵⁄₈

5 5

3.375

4¹⁄₈

2⁵⁹⁄₆₄

5

2¹¹⁄₁₆

³⁄₈

⁷⁄₁₆

1²⁵⁄₆₄

2⁵⁄₃₂

1⁹⁄₃₂

2³⁄₁₆

¹⁷⁄₃₂

³⁄₄

85.72

104.78

74.2

127.0

68.26

10

11.1

35.3

54.8

32.5

55.6

13.5

19.0

41.3

3.625

4³⁄₈

3³⁄₃₂

5¹⁄₄

2⁷⁄₈

³⁄₈

¹⁄₂

1²⁵⁄₆₄

2⁷⁄₃₂

1¹⁵⁄₃₂

2¹⁄₂

²¹⁄₃₂

³⁄₄

1⁷⁄₈

92.08

111.12

78.6

133.4

73.02

10

12.7

35.3

56.4

37.3

63.5

16.7

19.0

47.6

4.250

5¹⁄₈

3⁵⁄₈

6¹⁄₈

3¹⁄₈

⁷⁄₁₆

¹⁄₂

1¹⁹⁄₃₂

2¹⁵⁄₃₂

1¹⁷⁄₃₂

2³⁄₄

²¹⁄₃₂

⁷⁄₈

1⁷⁄₈

107.95

130.18

92.1

155.6

79.38

10

12.7

40.5

62.7

38.9

69.8

16.7

22.2

47.6

4.500

5³⁄₈

3⁵¹⁄₆₄

6³⁄₈

3¹⁄₈

⁷⁄₁₆

⁹⁄₁₆

1¹⁹|₃₂

2¹⁵⁄₃₂

1¹⁷⁄₃₂

2¹⁵⁄₁₆

²¹⁄₃₂

⁷⁄₈

1²⁹⁄₃₂

114.30

136.52

96.4

161.9

79.38

10

14.3

40.5

62.7

38.9

74.6

16.7

22.2

48.4

5.000

6

4¹⁄₄

7¹⁄₈

3⁵⁄₁₆

¹⁄₂

⁹⁄₁₆

1²¹|₃₂

2¹⁷⁄₃₂

1²¹⁄₃₂

3³⁄₈

²⁵⁄₃₂

1

2¹⁄₃₂

127.00

152.40

107.9

181.0

84.14

12

14.3

42.1

64.3

42.1

85.7

19.8

25.4

51.6

5.500

6¹⁄₂

4¹⁹⁄₃₂

7⁵⁄₈

3¹⁄₂

¹⁄₂

⁵⁄₈

1¹¹⁄₁₆

2²¹⁄₃₂

1¹³⁄₁₆

3⁵⁄₈

⁷⁄₈

1

2⁵⁄₃₂

139.70

165.10

116.7

193.7

88.90

12

15.9

42.9

67.5

46.0

92.1

22.2

25.4

54.8

6.375

7¹⁄₂

5¹⁹⁄₆₄

8³⁄₄

4

⁵⁄₈

³⁄₄

2¹⁄₃₂

3⁵⁄₃₂

1³¹⁄₃₂

4³⁄₁₆

161.92

190.50

134.5

222.2

101.60

16

19.0

51.6

80.2

50.0

7.375

8⁵⁄₈

6³⁄₃₂

10¹⁄₄

4³⁄₈

³⁄₄

¹⁵⁄₁₆

1¹⁵⁄₁₆

3³⁄₈

187.32

219.08

154.8

260.4

111.12

20

23.8

49.2

8.125

9³⁄₈

6⁵⁄₈

10⁷⁄₈

5¹⁄₁₆

³⁄₄

1¹⁄₈

206.38

238.12

168.3

276.2

128.59

20

28.6

Unit wt. (lbs./kg.)

P

M

²⁷⁄₃₂

1¹⁄₄

2⁵⁄₁₆

106.4 21.4

31.8

58.7

2⁷⁄₁₆

5

¹⁵⁄₁₆

1¹⁄₄

2²⁵⁄₃₂

85.8

61.9

127.0

23.8

31.8

70.6

2¹³⁄₃₂

3³¹⁄₃₂

2²¹⁄₃₂

5²⁹⁄₃₂

1¹⁄₃₂

2

3¹⁄₁₆

61.1

101.1

67.5

150.0 26.2

50.8

77.8

1.6

2.2 6 6 2.6 9 9 9 3.8 9 9 4.0 4.3 12 12 5.6 16 16 7.2 25 25 24 24 11.6 11.4 11.0 38 37 36 17.4 16.9 52 50 50 24.6 22.8

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62, D-63. Lubrication fitting tap size, 1" & smaller shaft size, ¹⁄₄-28 UNF; for all others, ¹⁄₈" PT. All units available with type E lip seals. † Tolerance, +.000 –.002" (+0.00 mm –0.05 mm); bore tolerance for mounting +.002" –.000" (+0.05 mm –0.00 mm). X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-20

Spherical Roller Bearing Takeup Units

T-B22400H Cast Iron Housing Machined Slots Self-aligning Spring Locking Collar Factory Adjusted Clearance


Takeup unit number

A

1

T-B22416H T-B224M25H

2¹⁵⁄₁₆ 74.6

1³⁄₁₆ 1¹⁄₄

T-B22419H T-B22420H T-B224M30H

3¹⁄₄

2¹⁄₂

2¹¹⁄₁₆

2⁵⁄₁₆

1⁷⁄₁₆

⁷⁄₈

2³⁄₁₆

4¹⁄₈

2³⁄₁₆

3.500

.531

⁵⁄₈

82.6

63.5

68.26

58.7

36.5

22.2 112.7

55.6

104.8 55.6

88.90

13.49

15.9

1⁷⁄₁₆ 1¹⁄₂

T-B22423H T-B22424H T-B224M35H

3¹⁄₂

2³⁄₄

2⁷⁄₈

2³⁄₈

1⁷⁄₁₆

⁷⁄₈

2¹⁄₄

4¹⁄₈

3.500

.531

⁵⁄₈

1²⁵⁄₃₂ 2³⁄₁₆

88.9

69.8

73.02

60.3

36.5

22.2 120.6

57.2

104.8 63.5

88.90

13.49

15.9

45.2

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

T-B22426H T-B22427H T-B22428H T-B224M40H

1¹⁵⁄₁₆ 2

T-B22431H T-B22432H T-B224M45H T-B224M50H

inches

25

30

35

40

45 50 2³⁄₁₆ 2¹⁄₄

T-B22435H T-B22436H T-B224M55H

2⁷⁄₁₆ 2¹⁄₂

T-B22439H T-B22440H T-B224M60H

55

60 2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3 65 70 75 3⁷⁄₁₆ 3¹⁄₂ 80 85 3¹⁵⁄₁₆ 4 90 100

T-B22443H T-B22444H T-B22447H T-B22448H T-B224M65H T-B224M70H T-B224M75H T-B22455H T-B22456H T-B224M80H T-B224M85H T-B22463H T-B22464H T-B224M90H T-B224M100H

4¹⁄₈

C 2¹⁄₄ 57.2

3¹⁄₄

104.8 82.6 4³⁄₈

3³⁄₈

D 2⁹⁄₁₆ 65.09

F 2 50.8

G 1¹⁄₄ 31.8

H

¹³⁄₁₆ 4 20.6 101.6

3¹⁄₈

3³⁄₁₆

1¹⁵⁄₁₆ 1¹⁄₈

79.38

81.0

49.2

3³⁄₁₆

1¹⁵⁄₁₆ 1¹⁄₈

111.1 85.7

79.38

81.0

49.2

5¹⁄₁₆

3⁵⁄₁₆

3³⁄₄

84.14

95.2

128.6 95.2 5⁹⁄₁₆

4

3¹⁄₂

141.3 101.6 88.90 6⁷⁄₁₆

4³⁄₄

4³⁄₄

5¹¹⁄₁₆

5¹⁵⁄₁₆

2¹⁄₁₆ 52.4

3⁵⁄₈ 92.1

63.5

120.6 69.8

2¹⁄₄

1¹⁄₄

57.2

31.8 177.8

2¹⁄₂

1³⁄₈

63.5

34.9 198.4 1⁵⁄₈

163.5 120.6 101.60 120.6

69.8

7³⁄₈

7¹³⁄₁₆

.531 13.49

⁵⁄₈ 15.9

1⁹⁄₁₆ 39.7

4.4

1⁵⁄₈

1³¹⁄₃₂ 2¹³⁄₁₆

5.7 5.6

41.3

50.0 71.4 3

.687

³⁄₄

1²⁹⁄₃₂ 2¹⁄₄

101.60

17.46

19.0

48.4

3⁵⁄₈

48.4

57.9 95.2

2⁹⁄₁₆

5¹⁄₄

4.500

.813

1

2¹⁄₁₆

2⁷⁄₁₆

65.1

133.4 85.7

114.30

20.64

25.4

52.4

61.9 113.5

5⁷⁄₈

68.3

149.2 92.1

187.3 139.7 111.12 123.8

73.0

8⁷⁄₈

3⁵⁄₈

3³⁄₄

4¹⁵⁄₃₂

5.125

1.063

1¹⁄₄

2³⁄₁₆

2⁹⁄₁₆

130.18

26.99

31.8

55.6

65.1 127.8

5¹⁄₃₂

1.812

1¹⁄₄

2⁷⁄₁₆

2²⁵⁄₃₂ 5²³⁄₃₂

169.9 106.4 150.81

46.02

31.8

61.9

70.6 145.2

3⁷⁄₁₆

7¹³⁄₁₆

1.812

1⁹⁄₁₆

2²¹⁄₃₂ 3

47.6 254.0

87.3

198.4 127.0 173.02

46.02

39.7

67.5

76.2 160.3

3¹⁄₈

1⁷⁄₈

4

9⁵⁄₈

2.062

1⁵⁄₈

3¹⁄₁₆

3⁷⁄₁₆

79.4

47.6 301.6

52.37

41.3

77.8

87.3 188.9

10

11⁷⁄₈

4³⁄₁₆

5

5²⁹⁄₃₂

5.937

6.812

8.625

101.6 244.5 150.0 219.08

2.6 6.4 6.4 2.9 9.7 9.5 9.5

57.2 92.1

19.0

2¹¹⁄₁₆

2.0

55.6 76.2

17.46

3³⁄₈

Unit wt. (lbs./kg.)

1²⁹⁄₃₂ 2⁹⁄₁₆ 48.4 65.1

4.000

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62, D-63. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. j Slots are machined, tolerance, +.005" –.015" (+0.13 mm –0.38 mm). X Width dimension for closed end unit. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-21

Y

101.60

1⁷⁄₈

225.4 177.8 128.59 133.4

3.000 76.20

W X

120.6 74.6

2⁷⁄₈

5¹⁄₄

U

1²⁹⁄₃₂ 2⁹⁄₃₂

81.0

5¹⁄₁₆

T

³⁄₄

41.3 227.0

7

2¹⁵⁄₁₆

S k

.687

6¹¹⁄₁₆

4⁷⁄₈

2³⁄₄

N k

4.000

3³⁄₁₆

4³⁄₈

8¹⁵⁄₁₆

2¹⁄₂

4³⁄₄

63.5

104.8

2 50.8

2¹⁄₂

28.6 150.8 7

M

L

4³⁄₄

4¹⁄₈

4³⁄₄

K

2¹⁄₂

2³⁄₄

5¹⁄₂

4

4⁷⁄₁₆

28.6 144.5

3¹⁄₈

3³⁄₄

J

6⁵⁄₁₆

7⁷⁄₁₆

4.5 9.9 9.7 4.7 4.7 14.1 14.1 6.8 18.0 17.8 8.3 13.6 13.5 13.0 12.9 6.6 6.4 5.9 43.5 43.1 20.5 20.0 77 76 34.9 34.5

Spherical Roller Bearing Takeups LHD Type (Bearing Unit Not Included) Welded Steel Frame Protected Screw P-B22400FH Pillow Block P-B22500FH Pillow Block P-B22600FH Pillow Block

Dimensions (inches/mm) Takeup frame Adjustment number

Shaft Sizes

B

C

D

E

G

H

⁵⁄₈ 16

2¹⁄₂ 63.5

¹⁄₄ 6.4

8¹⁄₂ 5¹⁄₄ 215.9 133.4

5 5¹⁄₂ 127.0 139.7

⁵⁄₈ 16

3 76.2

³⁄₈ 9.5

38¹⁄₄ 44¹⁄₄ 50¹⁄₄ 56¹⁄₄ 62¹⁄₄ 74¹⁄₄

6 6¹⁄₂ 152.4 165.1

³⁄₄ 20

3 76.2

37¹⁄₄ 43¹⁄₄ 49¹⁄₄ 55¹⁄₄ 61¹⁄₄ 73¹⁄₄

40 46 52 58 64 76

6 6¹⁄₂ 152.4 165.1

³⁄₄ 20

12 18 24 30 36 48

41¹⁄₄ 47¹⁄₄ 53¹⁄₄ 59¹⁄₄ 65¹⁄₄ 77¹⁄₄

44 50 56 62 68 80

7 6¹⁄₂ 177.8 165.1

12 18 24 30 36 48

47 53 59 65 71 83

49¹⁄₂ 55¹⁄₂ 61¹⁄₂ 67¹⁄₂ 73¹⁄₂ 85¹⁄₂

8¹⁄₂ 7 215.9 177.8

P-B224 PK-B224 P-B226 PK-B226

EP-B224 EP-B225 EP-B226

P-B225

1³⁄₁₆ thru 2¹⁄₂

1⁷⁄₁₆ thru 2¹⁄₂

1⁷⁄₁₆ thru 2⁷⁄₁₆


12 18 24 30 36 48

29 35 41 47 53 65

31 37 43 49 55 67

4 5 101.6 127.0

2¹¹⁄₁₆ thru 3

2¹¹⁄₁₆ thru 3

2¹¹⁄₁₆ thru 2¹⁵⁄₁₆


12 18 24 30 36 48

32³⁄₄ 38³⁄₄ 44³⁄₄ 50³⁄₄ 56³⁄₄ 68³⁄₄

35¹⁄₄ 41¹⁄₄ 47¹⁄₄ 53¹⁄₄ 59¹⁄₄ 71¹⁄₄

3³⁄₁₆ thru 3¹⁄₂

...

3⁷⁄₁₆

...


12 18 24 30 36 48

35¹⁄₂ 41¹⁄₂ 47¹⁄₂ 53¹⁄₂ 59¹⁄₂ 71¹⁄₂

3¹¹⁄₁₆ thru 4

3³⁄₁₆ thru 3¹⁄₂

3¹⁵⁄₁₆ thru 4¹⁄₂


12 18 24 30 36 48

...

...

...

...

4¹⁵⁄₁₆ thru 5


...

...

...

...

...

...


F Bolts

K

L

M

R

S Rod Dia.

V

Z

11 4 279.4 101.6

³⁄₄ ...

2 50.8

6¹⁄₄ 158.8

10³⁄₈ 6¹⁄₄ 263.5 158.8

13¹⁄₄ 5 336.6 127.0

1 ...

2⁹⁄₁₆ 65.1

7¹⁄₈ 181.0

¹⁄₂ 12.7

11³⁄₄ 7 298.4 177.8

14¹⁄₄ 6 362.0 152.4

1 ...

2¹⁄₂ 63.5

9 228.6

3 76.2

¹⁄₂ 12.7

12⁵⁄₈ 7 320.7 177.8

16 6 406.4 152.4

1¹⁄₄ ...

2¹⁄₂ 63.5

9 228.6

³⁄₄ 20

3 76.2

¹⁄₂ 12.7

14⁵⁄₈ 7 371.5 177.8

20 6 508.0 152.4

1¹⁄₂ ...

2¹⁄₂ 63.5

9 228.6

⁷⁄₈ 24

4 ¹⁄₂ 101.6 12.7

17¹⁄₂ 7³⁄₄ 444.5 196.8

23¹⁄₂ 6³⁄₄ 596.9 171.4

1¹⁄₂ ...

3³⁄₈ 85.7

11¹⁄₄ 285.8

Bold face items are normally available from stock; please consult for availability of non-stock items. Takeup frames can be furnished drilled to accommodate pillow block; order takeup frame drilled for " " pillow block; i.e. LHD20-12 drilled for P-B22419FH. For load ratings, see rating table for pillow block to be used. Additional information, page D-68, D-69.

D-22

Spherical Roller Bearing Takeups

DS-B22400H, DS-B22500H Welded Steel Frame Removable Top Protected Screw Cast Iron Bearing Housing Self-aligning Spring Locking Collar Factory Adjusted and Sealed DS-B22400H or DS-B22500H Takeup Units

Dimensions (inches/mm) Shaft dia. mm inches 1¹⁵⁄₁₆

45

Adjustment G

Takeup unit number

12 18 24

DS-B22431H-12 DS-B22431H-18 DS-B22431H-24

304.8 457.2 609.6

DS-B224M45H-12 DS-B224M45H-18 DS-B224M45H-24

A

3¹⁵⁄₁₆

100 50

2³⁄₁₆

55

2⁷⁄₁₆

60

2¹⁵⁄₁₆

65

70

75

B

C

26¹⁄₂ 32¹⁄₂ 38¹⁄₂

28¹⁄₂ 34¹⁄₂ 40¹⁄₂

E

3

F Bolts ⁵⁄₈

G

H

K

...

1³⁄₄

7¹⁄₄

723.9 876.3 76.2 1028.7

16

27¹⁄₂ 33¹⁄₂ 39¹⁄₂

29¹⁄₂ 35¹⁄₂ 41¹⁄₂

⁵⁄₈

...

1³⁄₄

7³⁄₄

749.3 901.7 76.2 1054.1

16

...

44.4

³⁄₄

...

304.8 457.2 609.6


12 18 24

DS-B22435H-12 DS-B22435H-18 DS-B22435H-24

4³⁄₁₆

304.8 457.2 609.6


698.5 106.4 850.9 1003.3

12 18 24 30

DS-B22439H-12 DS-B22439H-18 DS-B22439H-24 DS-B22439H-30

4³⁄₈

28¹⁄₂ 34¹⁄₂ 40¹⁄₂ 46¹⁄₂

30¹⁄₂ 36¹⁄₂ 42¹⁄₂ 48¹⁄₂

304.8 457.2 609.6 762.0

DS-B224M60H-12 DS-B224M60H-18 DS-B224M60H-24 DS-B224M60H-30

111.1

723.9 876.3 1028.7 1181.1

774.7 927.1 76.2 1079.5 1231.9

20

12 18 24 30


5¹⁄₈

30¹⁄₂ 36¹⁄₂ 42¹⁄₂ 48¹⁄₂

32¹⁄₂ 38¹⁄₂ 44¹⁄₂ 50¹⁄₂

304.8 457.2 609.6 762.0


304.8 457.2 609.6 762.0


130.2

774.7 927.1 1079.5 1231.9

825.5 977.9 101.6 1130.3 1282.7

304.8 457.2 609.6 762.0


3

4

8¹⁄₄

M

2¹⁵⁄₁₆

...

44.4

184.2 209.6 74.6

1²⁹⁄₃₂

V

W X

1¹⁄₄

2⁹⁄₃₂

Z

4¹⁄₈

Unit wt. (lbs./kg.) 43 49 54

48.4

31.8

57.9

104.8 19.5 22.2 24.5

8¹¹⁄₁₆

2¹⁄₁₆

1⁹⁄₃₂

2⁷⁄₁₆

4¹⁄₈

196.8 220.7 85.7

52.4

32.5

61.9

104.8

1³⁄₄

8¹⁄₄

2³⁄₁₆

1³⁄₈

2⁹⁄₁₆

4¹⁄₈

...

44.4

209.6 231.8 92.1

55.6

34.9

65.1

104.8

⁵⁄₈

2

2

9¹⁄₄

2⁷⁄₁₆

1⁵⁄₈

2²⁵⁄₃₂ 5¹⁄₈

16

50.8

50.8

235.0 269.9 106.4

61.9

41.3

70.6

9¹⁄₈

10⁵⁄₈

3³⁄₈

3⁵⁄₈

4³⁄₁₆

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62 through D-65. X Width dimension for closed end unit. Continued on facing page.

D-23

U

19.5 22.2 24.5

673.1 825.5 977.9

3

L

130.2

49 55 60 22.2 24.9 27.2 55 61 66 71 24.9 27.2 29.9 32.2 80 89 97 05

36.3 40.4 44.4 47.6

Dimensions (inches/mm) Shaft dia. Adjustment G

mm inches

A

5⁵⁄₈

32 38 44 50

34¹⁄₄ 40¹⁄₄ 46¹⁄₄ 52¹⁄₄

142.9

812.8 965.2 1117.6 1270.0

7

3⁷⁄₁₆

12 18 24 30


80

304.8 457.2 609.6 762.0


85

304.8 457.2 609.6 762.0


3¹⁵⁄₁₆

12 18 24 30


304.8 457.2 609.6 762.0


90

100

4⁷⁄₁₆

110

115

4¹⁵⁄₁₆

125

Takeup unit number

304.8 457.2 609.6 762.0


18 24 30

DS-B22571H-18i DS-B22571H-24i DS-B22571H-30i

457.2 609.6 762.0

DS-B225M110H-18 i DS-B225M110H-24 i DS-B225M110H-30 i

B

C

E

4

F Bolts

G

H

M

V

Z

2²¹⁄₃₂

1²³⁄₃₂

3

5⁵⁄₈

870.0 1022.4 101.6 1174.8 1327.2

20

50.8 50.8

254.0 300.0 127.0

67.5

43.6

76.2

142.9

36 42 48 54

38¹⁄₂ 44¹⁄₂ 50¹⁄₂ 56¹⁄₂

³⁄₄

2¹⁄₂

12

3¹⁄₁₆

2

3⁷⁄₁₆

6⁷⁄₈

177.8

914.4 1066.8 1219.2 1371.6

977.9 1130.3 127.0 1282.7 1435.1

20

63.5 57.2

304.8 373.1 150.0

77.8

50.8

87.3

174.6

7¹⁄₂

42 48 54

44¹⁄₂ 50¹⁄₂ 56¹⁄₂

³⁄₄

2¹⁄₂

12

3³⁄₈

3³⁄₈

3³⁄₄

6⁷⁄₈

20

63.5 57.2

304.8 398.5 155.6

85.7

85.7

95.2

174.6

⁷⁄₈

3

14¹⁄₂

3⁵⁄₈

3⁵⁄₈

4

7⁷⁄₈

24

76.2 101.6 368.3 514.4 174.8

91.9

91.9

101.6 200.1

5

1066.8 1130.3 190.5 1219.2 1282.7 127.0 1371.6 1435.1

457.2 609.6 762.0


18 24 30

DS-B22579H-18i DS-B22579H-24i DS-B22579H-30i

10

457.2 609.6 762.0


1193.8 254.0 1346.2 1498.6

47 53 59

50¹⁄₂ 56¹⁄₂ 62¹⁄₂

6

1282.7 1435.1 152.4 1587.5

2¹⁄₄

4

11¹³⁄₁₆ 5

W X

U

2

2¹⁄₄

10

L

³⁄₄

5

2

K

14¹¹⁄₁₆ 5²⁹⁄₃₂

15¹¹⁄₁₆ 6¹⁄₈

20¹⁄₄

6⁷⁄₈

Unit wt. (lbs./kg.) 107 116 124 132

48.5 52.6 56.2 59.9

180 192 202 212

81.6 87.1 91.6 96.2

238 250 263

108.0 113.4 119.3

406 424 441 184.2 192.3 200.0

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-62 through D-65. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. X Width dimension for closed end unit. 5 inch channel (Dim E) has hinged top construction G Takeups with adjustment of 18" (457.2 mm) or more have center ing pad welded to bottom of frame. i Series DS-B22500H takeups have two spring locking collars (bearing dimensions, page D-40, load rating, pages D-33, D-34, selection guide, pages D-31, D-32. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

D-24

Notes:

D-25

Replacement Spherical Roller Bearings

B22400HL Self-aligning Spring Locking Collar

Dimensions (inches/mm) Shaft Sizes mm inches 1 25

B22416HL B224M25HL

1³⁄₁₆ 1¹⁄₄

B22419HL B22420HL B224M30HL

1⁷⁄₁₆ 1¹⁄₂

B22423HL B22424HL B224M35HL

30

35 1¹⁄₂ 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 40 1³⁄₄ 1¹⁵⁄₁₆ 2 45 50

B224B24HL B22426HL B22427HL B22428HL B224M40HL B224B28HL B22431HL B22432HL B224M45HL B224M50HL

2³⁄₁₆ 2¹⁄₄

B22435HL B22436HL B224M55HL

2¹⁄₄ 2⁷⁄₁₆ 2¹⁄₂

B224B36HL B22439HL B22440HL B224M60HL

2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3

B22443HL B22444HL B22447HL B22448HL B224M65HL B224M70HL B224M75HL

55

60

65 70 75 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 80 85 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4 90 100

Bearing number *

B22451HL B22455HL B22456HL B224M80HL B224M85HL B22459HL B22463HL B22464HL B224M90HL B224M100HL

A mm +0.025 –0.000

inches +.0010 –.0000 1.0000

25.000 1.1875 1.2500 30.000 1.4375 1.5000 35.000 1.5000 1.6250 1.6875 1.7500 40.000 1.7500 1.9375 2.0000 45.000 50.000 2.1875 2.2500 55.000 2.2500 2.4375 2.5000 60.000 2.6875 2.7500 2.9375 3.0000 65.000 70.000 75.000 3.1875 3.4375 3.5000 80.000 85.000 3.6875 3.9375 4.0000 90.000 100.000

B +.0010" –.000" +0.025 mm –0.000mm 2.3750 60.325

C ±.025" ±0.64 mm ‡

E Shoulder diameter

1.188 30.18

2 50.8

M

H 2⁹⁄₁₆ 65.09

2 50.8

N

R Housing fillet

T

Y

1.307 33.20

.046 1.17

¹⁄₂ 12.7

1 25.40

1.3 1.8 1.7

2.6250

1.312

2⁵⁄₁₆

2¹¹⁄₁₆

2³⁄₁₆

1.532

.062

¹⁄₂

1¹⁄₁₆

66.675

33.32

58.7

68.26

55.6

38.91

1.57

12.7

26.99

2.8345

1.310

2¹⁄₂

2⁷⁄₈

2¹⁄₂

1.745

.062

⁵⁄₈

1³⁄₃₂

71.996

33.27

63.5

73.02

63.5

44.32

1.57

15.9

27.78

3.3464

1.578

2⁷⁄₈

3¹⁄₈

2³⁄₄

2.027

.062

⁵⁄₈

1⁷⁄₃₂

84.998

40.08

73.0

79.38

69.8

51.48

1.57

15.9

30.96

3.5433

1.526

3³⁄₁₆

3¹⁄₈

2¹⁵⁄₁₆

2.307

.078

⁵⁄₈

1⁷⁄₃₂

90.000

38.76

81.0

79.38

74.6

58.59

1.98

15.9

30.96

3.9370

1.656

3¹⁄₂

3⁵⁄₁₆

3³⁄₈

2.620

.062

³⁄₄

1¹⁄₄

100.000

42.06

88.9

84.14

85.7

66.55

1.57

19.0

31.75

4.3307

1.750

3⁷⁄₈

3¹⁄₂

3⁵⁄₈

2.901

.078

¹³⁄₁₆

1⁵⁄₁₆

110.000

44.45

98.4

88.90

92.1

73.69

1.98

20.6

33.34

5.1172

2.125

4¹⁷⁄₃₂

4

4³⁄₁₆

3.370

.078

¹³⁄₁₆

1⁹⁄₁₆

129.977

53.98

115.1

101.60

106.4

85.60

1.98

20.6

39.69

5.9045

2.313

5¹¹⁄₃₂

4³⁄₈

5

3.975

.125

²⁷⁄₃₂

1²³⁄₃₂

149.974

58.75

135.7

111.12

127.0

100.97

3.18

21.4

43.66

7.0856

2.750

6³⁄₈

5¹⁄₁₆

5²⁹⁄₃₂

4.561

.125

³¹⁄₃₂

2

179.974

69.85

161.9

128.59

150.0

115.85

3.18

24.6

50.80

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearings for expansion units use complete CSE-B22400H per page D-16. For B22500 replacement bearing 4³⁄₁₆" through 5" (110 mm through 125 mm), see page D-40. * Includes bearing, two floating labyrinth seals, and one spring locking collar. All bearings available with type E lip seals. Selection guide, pages D-5, D-6. Load ratings, pages D-7, D-8. Additional information, page D-68.

Unit wt. (lbs./kg.)

0.6

0.8 2.2 2.1 1.0 3.3 3.2 3.0 1.6 3.5 3.3 1.8 1.5 4.7 4.5 2.2 5.9 5.7 2.8 10.3 10.1 9.0 8.7 4.8 4.6 4.1 14.4 12.8 12.4 6.6 6.1 25.2 23.2 22.6 12.3 10.5

‡ Use shims, threaded cover, or spacer ring to provide for adjustment. Housing must allow clearance for this adjustment on dimension C.

D-26

Series B22500 Spherical Roller Bearing Units

Series B22500 double collar mounted spherical roller bearing units will shafts carrying substantial radial or combination radial and thrust loads. These units are adaptable for conveyors, elevators, general industrial machinery, heavier duty fans and blowers, power transmission applications, ditchers, trenchers, pavers and other applications. They differ from series B22400 units in that they have two locking collars and the pillow blocks have higher backing and longer bolt centers. Series B22500 units are easy to mount, sealed, prelubricated and do not require bearing adjustment during mounting.

a Two spring locking collars lock inner ring securely to shaft. b Choice of two seals, floating labyrinth Type H, and spring-loaded lip Type E.

c b a

c Extra long inner ring for high stability and load . d Self-aligning double row spherical roller bearing adjusts ±2° to allow for alignment variations between shaft and ing structure.

d

e Double contoured retainer pockets assure accurate roller guidance and positive roller control.

e f

f Sturdy, compact one-piece high-test cast iron housing. g Slotted bolt holes in pillow block bases facilitate mounting; bottom of base is machined.

g

D-27

Spherical Roller Bearings Series B22500 self-aligning double row spherical roller bearings have extra long inner rings, high LDN values and are designed to distribute the load over the symmetrical rollers, assuring positive tracking and smooth operation. The large roller complement provides high capacity for radial or combined radial-thrust loads.

Osculation clearance at the ends of the rollers compensates for shock loads and prevents destructive edge loading. These precision bearings with double contoured retainer pockets are designed to meet a broad range of application requirements.

Spring Locking Collars The two spring locking collar design provides a secure grip of the extra long inner ring bearing to the shaft. The four set screws extend through the inner ring of the bearing and lock firmly onto the shaft. Installation is fast and simple. Correctly tightening the four set screws produces elastic strain in the spring

locking collars resulting in a continuous pressure on the set screw threads and providing a positive lock.



TYPE H SEAL

TYPE E SEAL

One-piece Cast Iron Housings Compact one-piece housings provide for strength and load . Scientifically contoured housing design provides superior rigidity. Pillow blocks have two or four slotted bolt holes with ample space provided for drilling dowel pin holes. Cartridge units have steel housings and

are finished to precision tolerances. Pillow blocks and cartridge units are available for fixed or expansion operation.

D-28

Series B22500 Spherical Roller Bearing Units Pillow Blocks, cast iron P-B22500H, PE-B22500H, EP-B22500H*, EPE-B22500H* P-B22500FH, PE-B22500FH, EP-B22500FH*, EPE-B22500FH* Self-aligning 2-bolt base pillow blocks for shaft sizes 1⁷⁄₁₆" through 2¹⁵⁄₁₆", and 4-bolt base pillow blocks for shaft sizes 1¹⁵⁄₁₆" through 5". Metric bores of 110, 115, and 125 mm available. Bearings have extra long inner ring and two spring locking collars. Units are available for fixed or expansion mounting. Load ratings on pages D-33 and D-34. Dimensions on page D-35. Additional information on page D-68. *Self-aligning Type E Interchange

Pillow Blocks, cast steel PK-B22500FH, PKE-B22500FH Self-aligning 4-bolt base pillow blocks. Cast steel housing for shaft sizes 4³⁄₁₆" through 5" and 110, 115, and 125 mm. Bearings have extra long inner ring and two spring locking collars. Units are available for fixed or expansion mounting. Load ratings on pages D-33 and D-34. Dimensions on page D-14. Additional information on page D-68.

Flanged Units, cast iron EF-B22500H* Self-aligning flanged units for shaft sizes, 1⁷⁄₁₆" through 4". Bearings have extra long inner ring and two spring locking collars. Load ratings on pages D-33 and D-34. Dimensions on page D-37. Additional information on page D-68. *Self-aligning Type E Interchange

D-29

Cartridge Units, steel CSE-B22500H Self-aligning cartridge units for shaft sizes 1⁷⁄₁₆" through 5" and 110, 115, and 125 mm. Bearings have extra long inner ring and two spring locking collars. Units are available for fixed or expansion mounting. Load ratings on pages D-33 and D-34. Dimensions on page D-39. Additional information on page D-68.

Takeups, cast iron DSH-B22500H Self-aligning takeups for shaft sizes 1¹⁵⁄₁₆" through 3¹⁵⁄₁₆". Bearings have extra long inner ring and two spring locking collars and are mounted in a one-piece cast iron housing. Takeups have extra heavy welded steel adjustable type frames. Load ratings on pages D-33 and D-34. Dimensions on page D-38. Additional information on page D-68.

Replacement Bearings B22500HL Self-aligning double-row spherical roller bearing with extra long inner ring and two spring locking collars for shaft sizes 1⁷⁄₁₆" through 5" and 110, 115, and 125 mm. Load ratings on pages D-33 and D-34. Dimensions on page D-40. Additional information on page D-68.

D-30

Selection

Series B22500 To select a bearing, determine the applied radial load, the applied thrust load, the desired Rating Life, and applicable operating conditions. The procedure shown here will aid in selecting a bearing to meet an L₁₀ design life. The formulas for calculating life expectancy should be used to determine the Rating Life L₁₀ for the bearing selected.

The selection procedures and rating formulas shown here are in agreement with The American Bearing Manufacturers Association Standards and ANSI/ ABMA Standards STD 11-1990. Ratings are based on fatigue life. The Rating Life L₁₀ or fatigue life at 90% reliability is the usual basis for bearing selection.

Bearing Selection Step 1 Determine an appropriate L₁₀ design life. Operating time, Type of service hours per year Heavy seasonal usage Industrial—8 hour shift Industrial—16 hour shift Industrial—continuous

Design life, years

1,400 to 1,600 2,000 4,000 8,700

4-6 10 10 10

L₁₀ design life, hours 8,000 20,000 40,000 80,000 to 100,000

from Table 1.



P

using

from Step 2


Calculate the equivalent radial load P P = XFr + YFa if

is equal to or less than e, then P = X1Fr + Y1Fa

If

is greater than e, then P = X2Fr + Y 2Fa


P using

from Step 2.

Consult Table 2, page D-33, basic load rating. If a smaller bearing meets, or nearly meets, the required C, its life expectancy can be calculated. Note: If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp. D-31


Selection

Series B22500 symbols for formulas: C Co e Fa Fr L₁₀ n P X Y

= = = = = = = = = =

basic formulas:


=

(

L₁₀ u n u 60 1,000,000

)

3/10

10/3

u1,000,000 n u 60

L₁₀ =



a

Speed, n 50

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000


ratio

Bearing life, hours L₁₀ 1.93 2.11 2.25 2.38 2.59 2.77 2.93 3.07 3.19 3.31 3.42 3.65 3.86 4.04 4.20 4.36 4.50 4.75 4.97 5.18 5.36 5.54 6.25 6.81

100

200

300

400

500

600

700

800

2.38 2.93 3.31 3.61 2.59 3.19 3.61 3.93 2.77 3.42 3.86 4.20 2.93 3.61 4.07 4.44 3.19 3.93 4.44 4.84 3.42 4.20 4.75 5.18 3.61 4.44 5.02 5.47 3.78 4.65 5.25 5.73 3.93 4.84 5.47 5.96 4.07 5.02 5.66 6.18 4.20 5.18 5.85 6.37 4.50 5.54 6.25 6.81 4.75 5.85 6.60 7.20 4.97 6.12 6.92 7.54 5.18 6.37 7.20 7.85 5.36 6.60 7.46 8.13 5.54 6.81 7.70 8.39 5.85 7.20 8.13 8.86 6.12 7.54 8.51 9.28 6.37 7.85 8.86 9.66 6.60 8.13 9.18 10.00 6.81 8.39 9.48 10.30 7.70 9.48 10.70 11.70 8.39 10.30 11.70 12.70

3.86 4.20 4.50 4.75 5.18 5.54 5.85 6.12 6.37 6.60 6.81 7.29 7.70 8.06 8.39 8.69 8.97 9.48 9.92 10.30 10.70 11.00 12.50 13.60

4.07 4.44 4.75 5.02 5.47 5.85 6.18 6.47 6.73 6.97 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.00 10.50 10.90 11.30 11.70 13.20 14.40

4.27 4.65 4.97 5.25 5.73 6.12 6.47 6.77 7.05 7.30 7.54 8.06 8.51 8.92 9.28 9.61 9.92 10.50 11.00 11.40 11.80 12.20 13.80 15.00

4.44 4.84 5.18 5.47 5.96 6.37 6.73 7.05 7.34 7.60 7.85 8.39 8.86 9.28 9.66 10.00 10.30 10.90 11.40 11.90 12.30 12.70 14.40 15.70

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

4.60 5.02 5.36 5.66 6.18 6.60 6.97 7.30 7.60 7.88 8.13 8.69 9.18 9.61 10.00 10.40 10.70 11.30 11.80 12.30 12.80 13.20 14.90 16.20

1000 1200 1500 1800 2400 3000 3600 6000 4.75 5.18 5.54 5.85 6.37 6.81 7.20 7.54 7.85 8.13 8.39 8.97 9.48 9.92 10.30 10.70 11.00 11.70 12.20 12.70 13.20 13.60 15.40 16.70

5.02 5.47 5.85 6.18 6.73 7.20 7.60 7.96 8.29 8.59 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.30 12.90 13.40 13.90 14.40 16.20 17.70

5.36 5.85 6.25 6.60 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.10 10.70 11.20 11.70 12.10 12.50 13.20 13.80 14.40 14.90 15.40 17.30 18.90

5.66 6.18 6.60 6.97 7.60 8.13 8.59 8.99 9.36 9.70 10.00 10.70 11.30 11.80 12.30 12.80 13.20 13.90 14.60 15.20 15.70 16.20 18.30 20.00



If


For values of e, X1, Y1, X2, and Y2, see the bearing rating Table 2, page D-33. Step 2 Calculate the ratio of the basic load rating C to the equivalent radial load. C P Step 3 Approximate the bearing life from Table 1.

Life Adjustment

Speed, n 900


6.18 6.73 7.20 7.60 8.29 8.86 9.36 9.80 10.20 10.60 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.20 15.90 16.50 17.10 17.70 20.00 21.80

6.60 7.20 7.70 8.13 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.50 13.20 13.80 14.40 14.90 15.40 16.20 17.00 17.70 18.30 18.90 21.40 23.30

6.97 7.60 8.13 8.59 9.36 10.00 10.60 11.10 11.50 11.90 12.30 13.20 13.90 14.60 15.20 15.70 16.20 17.10 17.90 18.70 19.40 20.00 22.60 24.60

8.13 8.86 9.48 10.00 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.40 16.20 17.00 17.70 18.30 18.90 20.00 20.90 21.80 22.60 23.30 26.30 28.70



,


Load Ratings

Series B22500 Table 2 • Load ratings and speed limits Shaft diameter mm

inches

newtons


C Basic load rating pounds

newtons

pounds

X₁

H and E seals

Y₁

Le X₂

Y₂

B22523

93 200

20900

64 900

14600

2750

.44

1.00

1.54

.67

2.29

1¹¹⁄₁₆

B22527

127 700

28700

89 800

20200

2350

.45

1.00

1.51

.67

2.25

1¹⁵⁄₁₆

B22531

147 700

33200

94 300

21200

2150

.40

1.00

1.68

.67

2.50

2 2³⁄₁₆

B22532 B22535

197 500

44400

117 400

26400

1950

.40

1.00

1.68

.67

2.50

2⁷⁄₁₆

B22539

238 000

53500

139 700

31400

1750

.38

1.00

1.80

.67

2.68

2¹¹⁄₁₆ 2¹⁵⁄₁₆

B22543 B22547

318 000

71500

185 900

41800

1500

.38

1.00

1.79

.67

2.67

3⁷⁄₁₆

B22555

403 400

90700

226 800

51000

1250

.38

1.00

1.77

.67

2.64

3¹⁵⁄₁₆ 4

B22563 B22564

609 400

137000

351 800

79100

1100

.36

1.00

1.88

.67

2.79

4³⁄₁₆ 4⁷⁄₁₆ 4¹⁄₂

B22567 B22571 B22572 B225M110 B225M115

790 200

178000

419 400

94300

1000

.38

1.00

1.80

.67

2.68

4¹⁵⁄₁₆ 5

B22579 B22580 B225M125

944 700

212000

520 400

117000

900

.37

1.00

1.83

.67

2.72

If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp. * Based on grease lubrication and moderate load. Additional information, page D-68.

D-33

me

e

1⁷⁄₁₆

110 115

125

Bearing size number


Load Ratings

Series B22500 Table 3 • Radial load ratings in pounds at various RPM for appropriate L₁₀ life hours Shaft diameter mm

inches

Bearing size number

1⁷⁄₁₆ B22523

8000 20000 40000 100000

1¹¹⁄₁₆ B22527

8000 20000 40000 100000

1¹⁵⁄₁₆ B22531

8000 20000 40000 100000

2 B22532 2³⁄₁₆ B22535

8000 20000 40000 100000

2⁷⁄₁₆ B22539

8000 20000 40000 100000

2¹¹⁄₁₆ B22543 2¹⁵⁄₁₆ B22547

8000 20000 40000 100000

3⁷⁄₁₆ B22555

8000 20000 40000 100000

3¹⁵⁄₁₆ B22563 4 B22564

8000 20000 40000 100000

4³⁄₁₆ B22567 4⁷⁄₁₆ B22571 4¹⁄₂ B22572

110 115

B225M110 B225M115 4⁵⁄₁₆ B22579 5 B22580

125


B225M125

8000 20000 40000 100000 8000 20000 40000 100000


100

200

300

500

700

900

3470 2630

3470 2820 2140

2820 2290 1740

3290 2500 2020 1540

2820 2140 1740 1320

2540 1930 1570 1200

2360 1800 1450 1100

4800 3640

4800 3900 2960

3900 3170 2400

4540 3450 2800 2130

3900 2960 2400 1820

3520 2680 2180 1650

5040 3830

5040 4100 3110

4100 3320 2520

4770 3620 2940 2230

4100 3110 2520 1910

6280 4770

6280 5100 3870

5100 4140 3140

5940 4510 3670 2790

7470 5670

7470 6070 4600

6070 4920 3740

9940 7550

9940 8070 6130

1000

1200

1500

2290 1740 1410 1070

2170 1640 1330 1010

2020 1540 1250 950

3270 2480 2010 1530

3170 2400 1950 1490

3000 2280 1850 1400

3700 2810 2280 1730

3430 2600 2110 1600

3320 2520 2050 1550

5100 3870 3140 2390

4600 3500 2840 2160

4280 3240 2630 2000

7070 5370 4360 3310

6070 4600 3740 2840

5480 4170 3380 2570

8070 6550 4980

9410 7150 5800 4410

8070 6130 4980 3780

12100 9210

12100 9850 7480

9850 8000 6080

11400 8720 7090 5380

18800 14200

18800 15200 11600

15200 12400 9420

22400 17000

22400 18200 13800

27800 21100

27800 22500 17100

1800

2000

2500

1920 1450 1180 900

1860 1410 1140 872

1740 1320 1070 815

2800 2130 1730 1310

2650 2010 1630 1240

2570 1950 1590 1200

3140 2390 1940 1480

2940 2230 1810 1380

2790 2110 1720 1300

2700 2050 1670 1270

4140 3140 2550 1940

3920 2980 2410 1830

3670 2790 2260 1710

3470 2630 2140 1620

5090 3860 3130 2380

4920 3740 3030 2300

4660 3540 2880 2190

4360 3310 2690 2040

7300 5540 4500 3420

6770 5140 4180 3170

6550 4980 4040 3070

6200 4710 3830 2910

5800 4410 3580 2720

9850 7480 6080 4610

8900 6770 5500 4170

8250 6270 5100 3870

8000 6080 4930 3750

7580 5750 4670 3550

17800 13500 11000 8340

15200 11600 9420 7160

13800 10400 8520 6470

12800 9730 7900 6000

12400 9420 7650 5810

18200 14800 11200

21200 16100 13100 9950

18200 13800 11200 8530

16400 12500 10100 7710

15200 11600 9420 7150

14800 11200 9120 6930

22500 18300 13900

26300 20000 16200 12300

22500 17100 13900 10500

20400 15500 12600 9580

18900 14300 11700 8880

If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp.

D-34


P-B22500H, PE-B22500H P-B22500FH, PE-B22500FH Cast Iron Housing 2- or 4-Bolt Base Fixed or Expansion Self-aligning Two Spring Locking Collars Factory Adjusted and Sealed

Fixed

Expansion


Pillow block number g Fixed

Expansion

A †

B

C

D

E

F Bolts

G

H

L

M

P

S

U

W X

Unit wt. (lbs./kg.)

2-bolt base P-B22523H

PE-B22523H

2¹⁄₈ 53.98

5⁷⁄₈ 7⁷⁄₈ 3⁹⁄₁₆ 149.2 200.0 90.49

2¹⁄₂ 63.5

¹⁄₂ 12

... ...

1³⁄₈ 4¹⁄₈ 2¹⁄₂ 34.9 104.8 63.5

¹¹⁄₁₆ 17.5

⁷⁄₈ 22.2

1²⁵⁄₃₂ 2³⁄₁₆ 45.2 55.6

10 —

1¹¹⁄₁₆ P-B22527H

PE-B22527H

2⁵⁄₁₆ 58.74

6¹⁄₂ 8⁹⁄₁₆ 3¹³⁄₁₆ 165.1 217.5 96.84

2¹³⁄₁₆ 71.4

¹⁄₂ 12

... ...

1¹⁄₂ 4¹⁹⁄₃₂ 2³⁄₄ 38.1 116.7 69.8

²³⁄₃₂ ⁷⁄₈ 18.2 22.2

1²⁹⁄₃₂ 2¹⁄₄ 48.4 57.2

12 —

1¹⁵⁄₁₆ P-B22531H

PE-B22531H

2¹⁄₂ 63.50

7 177.8

2⁷⁄₈ 73.0

⁵⁄₈ 16

... ...

1¹¹⁄₁₆ 4⁷⁄₈ 2¹⁵⁄₁₆ 42.9 123.8 74.6

²³⁄₃₂ 1¹⁄₈ 18.2 28.6

1²⁹⁄₃₂ 2⁹⁄₃₂ 48.4 57.9

14 —

2 2³⁄₁₆

P-B22532H P-B22535H

PE-B22532H PE-B22535H

2³⁄₄ 69.85

7¹⁄₂ 9¹⁵⁄₁₆ 4¹⁄₈ 3¹⁄₈ 190.5 252.4 104.78 79.4

⁵⁄₈ 16

... ...

2 5¹⁵⁄₃₂ 3³⁄₈ 50.8 138.9 85.7

²⁵⁄₃₂ 1¹⁄₈ 2¹⁄₁₆ 19.8 28.6 52.4

2⁷⁄₁₆

P-B22539H

PE-B22539H

3 76.20

8¹⁄₄ 10³⁄₄ 4³⁄₈ 3³⁄₈ 209.6 273.0 111.12 85.7

³⁄₄ 20

... ...

2¹⁄₈ 5⁷⁄₈ 3⁵⁄₈ 54.0 149.2 92.1

¹³⁄₁₆ 1¹⁄₄ 20.6 31.8

2¹¹⁄₁₆ P-B22543H 2¹⁵⁄₁₆ P-B22547H

PE-B22543H PE-B22547H

3¹⁄₂ 88.90

9³⁄₄ 247.6

12⁷⁄₈ 327.0

⁷⁄₈ 24

... ...

2⁵⁄₁₆ 6¹⁵⁄₁₆ 4³⁄₁₆ ²⁹⁄₃₂ 58.7 176.2 106.4 23.0

1¹⁵⁄₁₆ P-B22531FH

PE-B22531FH

2¹⁄₂ 63.50

7 177.8

9 3¹³⁄₁₆ 228.6 96.84

¹⁄₂ 12

2¹⁄₄ 57.2

1¹¹⁄₁₆ 4⁷⁄₈ 2¹⁵⁄₁₆ 42.9 123.8 74.6

2 2³⁄₁₆

P-B22532FH P-B22535FH

PE-B22532FH PE-B22535FH

2³⁄₄ 69.85

7¹⁄₂ 9¹⁵⁄₁₆ 4¹⁄₈ 4 190.5 252.4 104.78 101.6

⁵⁄₈ 16

2¹⁄₄ 57.2

2⁷⁄₁₆

P-B22539FH

PE-B22539FH

3 76.20

8¹⁄₄ 10⁵⁄₈ 4³⁄₈ 4³⁄₈ 209.6 269.9 111.12 111.1

2¹¹⁄₁₆ P-B22543FH 2¹⁵⁄₁₆ P-B22547FH


3¹⁄₂ 88.90

9³⁄₄ 247.6

3⁷⁄₁₆

P-B22555FH

1⁷⁄₁₆

9¹⁄₄ 3¹³⁄₁₆ 235.0 96.84

2⁷⁄₁₆ 61.9

21 20

2³⁄₁₆ 2⁹⁄₁₆ 55.6 65.1

24 —

1⁵⁄₈ 41.3

2⁷⁄₁₆ 61.9

2²⁵⁄₃₂ 70.6

39 37

²³⁄₃₂ 18.2

⁷⁄₈ 22.2

1²⁹⁄₃₂ 2⁹⁄₃₂ 48.4 57.9

16 —

2 5¹⁵⁄₃₂ 3³⁄₈ 50.8 138.9 85.7

²⁵⁄₃₂ 19.8

1¹⁄₈ 28.6

2¹⁄₁₆ 52.4

2⁷⁄₁₆ 61.9

22 22

⁵⁄₈ 16

2⁵⁄₈ 2¹⁄₈ 5⁷⁄₈ 3⁵⁄₈ 66.7 54.0 149.2 92.1

¹³⁄₁₆ 20.6

1¹⁄₈ 28.6

2³⁄₁₆ 55.6

2⁹⁄₁₆ 65.1

26 —

12⁵⁄₈ 4⁷⁄₈ 4³⁄₄ 320.7 123.82 120.6

³⁄₄ 20

2³⁄₄ 2⁵⁄₁₆ 6¹⁵⁄₁₆ 4³⁄₁₆ ²⁷⁄₃₂ 69.8 58.7 176.2 106.4 21.4

1¹⁄₂ 38.1

2⁷⁄₁₆ 61.9

2²⁵⁄₃₂ 70.6

38 36

PE-B22555FH

4 11¹⁄₂ 14¹⁄₄ 5⁵⁄₁₆ 5 101.60 292.1 362.0 134.94 127.0

³⁄₄ 20

3 76.2

¹⁵⁄₁₆ 23.8

1¹⁄₂ 38.1

2²¹⁄₃₂ 3 67.5 76.2

56 —

3¹⁵⁄₁₆ P-B22563FH 4 P-B22564FH


4⁷⁄₁₆ 12¹⁄₄ 15⁵⁄₈ 6¹⁄₈ 5⁵⁄₈ 112.71 311.2 396.9 155.58 142.9

⁷⁄₈ 24

3³⁄₈ 2⁷⁄₈ 8¹³⁄₁₆ 5²⁹⁄₃₂ 1¹⁄₁₆ 85.7 73.0 223.8 150.0 27.0

1³⁄₄ 44.4

3¹⁄₁₆ 77.8

3⁷⁄₁₆ 87.3

76 76

4³⁄₁₆ 4⁷⁄₁₆ 4¹⁄₂

PE-B22567FHG PE-B22571FHG 4³⁄₄ 13¹⁄₂ 16¹⁄₂ 6³⁄₄ 4³⁄₄ PE-B22572FHG G PE-B225M110FH 120.65 342.9 419.1 171.45 120.6 PE-B225M115FH G

³⁄₄

2¹⁄₂

1³⁄₈

3³⁄₈

3³⁄₄

20

63.5 69.8 238.1 155.6 28.6

34.9

85.7

95.2

⁷⁄₈

2³⁄₄

1⁷⁄₃₂

1¹⁄₂

3⁵⁄₈

4

24

69.8 76.2 276.2 174.6

31.0

38.1

92.1

101.6

4⁷⁄₈ 3⁷⁄₈ 123.82 98.4

4-bolt Base

110 115

P-B22567FHG P-B22571FHG P-B22572FHG P-B225M110FH G P-B225M115FH G

125

4¹⁵⁄₁₆ P-B22579FH 5 P-B22580FHG P-B225M125FH G G

G

3¹³⁄₁₆ 96.8

PE-B22579FH 5¹⁄₂ 15¹⁄₂ 18¹⁄₂ 7¹⁄₄ 5³⁄₈ PE-B22580FHG PE-B225M125FH G 139.70 393.7 469.9 184.15 136.5

2¹⁄₂ 7³¹⁄₃₂ 5 63.5 202.4 127.0

2³⁄₄

3

9³⁄₈

10⁷⁄₈

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-64, D-65. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. † Tolerance, ±.005" (±0.13 mm). G Also available with cast steel housings. See page D-14. g LHD sliding base takeup can be drilled for P-B22500H pillow blocks, see page D-22. * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. X Width dimension for closed end unit. Selection guide, pages D-31, D-32. Load ratings, pages D-33, D-34. Additional information, page D-68.

D-35

6¹⁄₈

6⁷⁄₈

1¹⁄₈

92 88 87 40.7 39.5 129 128 58.1


EP-B22500H, EPE-B22500H EP-B22500FH, EPE-B22500FH Cast Iron Housing 2 or 4-Bolt Base Fixed or Expansion Self-aligning Two Spring Locking Collars Factory Adjusted and Sealed Self-Aligning Type E Interchange Fixed

Expansion


Pillow block number g Fixed Expansion

A †

B

C

min.

max.

D

E

F

G

H

L

M

U

W X

Unit wt.

2-bolt base 1⁷⁄₁₆

EP-B22523H

EPE-B22523H

1⁷⁄₈ 47.62

4³⁄₄ 120.6

6 152.4

7³⁄₈ 187.3

3⁹⁄₁₆ 90.49

2¹⁄₄ 57.2

¹⁄₂ 12

... ...

1¹⁄₈ 3⁷⁄₈ 28.6 98.4

2¹⁄₂ 63.5

1²⁵⁄₃₂ 2³⁄₁₆ 45.2 55.6

8 —

1¹¹⁄₁₆

EP-B22527H

EPE-B22527H

2¹⁄₈ 53.98

5¹⁄₂ 139.7

6¹⁄₂ 165.1

7⁷⁄₈ 3¹³⁄₁₆ 200.0 96.84

2¹⁄₂ 63.5

¹⁄₂ 12

... ...

1¹⁄₄ 4³⁄₈ 2³⁄₄ 31.8 111.1 69.8

1²⁹⁄₃₂ 2¹⁄₄ 48.4 57.2

12 —

1¹⁵⁄₁₆

EP-B22531H

EPE-B22531H

2¹⁄₄ 57.15

6¹⁄₁₆ 154.0

7¹⁄₄ 184.2

8⁷⁄₈ 3¹³⁄₁₆ 225.4 96.84

2¹⁄₂ 63.5

⁵⁄₈ 16

... ...

1⁵⁄₁₆ 4⁹⁄₁₆ 2¹⁵⁄₁₆ 33.3 115.9 74.6

1²⁹⁄₃₂ 2⁹⁄₃₂ 48.4 57.9

13 —

2³⁄₁₆

EP-B22535H

EPE-B22535H

2¹⁄₂ 63.50

6⁹⁄₁₆ 166.7

8 203.2

9⁵⁄₈ 4¹⁄₈ 2⁹⁄₁₆ 244.5 104.78 65.1

⁵⁄₈ 16

... ...

1¹⁄₂ 5 38.1 127.0

3³⁄₈ 85.7

2¹⁄₁₆ 2⁷⁄₁₆ 52.4 61.9

16 —

2⁷⁄₁₆

EP-B22539H

EPE-B22539H

2³⁄₄ 69.85

6¹⁵⁄₁₆ 176.2

8³⁄₄ 222.2

10¹⁄₂ 4³⁄₈ 2¹¹⁄₁₆ 266.7 111.12 68.3

⁵⁄₈ 16

... ...

1⁵⁄₈ 5¹⁄₂ 3⁵⁄₈ 41.3 139.7 92.1

2³⁄₁₆ 2⁹⁄₁₆ 55.6 65.1

18 —

2¹¹⁄₁₆ 2¹⁵⁄₁₆

EP-B22543H EP-B22547H

EPE-B22543H EPE-B22547H

3¹⁄₈

7¹³⁄₁₆

9³⁄₄

11¹¹⁄₁₆ 4⁷⁄₈

³⁄₄

...

1⁷⁄₈

2⁷⁄₁₆

79.38

198.4

247.6

296.9 123.82 96.8

20

...

47.6 160.3 106.4

61.9 70.6

31 29 —

9⁵⁄₁₆ 236.5

11⁵⁄₁₆ 287.3

13¹³⁄₁₆ 5⁵⁄₁₆ 350.8 134.9

3¹⁄₂ 88.9

⁷⁄₈ 24

... ...

2¹⁄₄ 7¹⁄₂ 5 57.2 190.5 127.0

2²¹⁄₃₂ 3 67.5 76.2

45 —

3¹³⁄₁₆

6⁵⁄₁₆

4³⁄₁₆

2²⁵⁄₃₂

EP-B22555H

EPE-B22555H

3³⁄₄ 96.25

2⁷⁄₁₆

EP-B22539FH

EPE-B22539FH

2³⁄₄ 69.85

6¹⁵⁄₁₆ 176.2

8³⁄₄ 222.2

10¹⁄₂ 4³⁄₈ 3⁵⁄₈ 266.7 111.12 92.1

⁵⁄₈ 16

1⁷⁄₈ 47.6

1⁵⁄₈ 5¹⁄₂ 3⁵⁄₈ 41.3 139.7 92.1

2³⁄₁₆ 2⁹⁄₁₆ 55.6 65.1

21 —

2¹¹⁄₁₆ 2¹⁵⁄₁₆

EP-B22543FH EP-B22547FH

EPE-B22543FH EPE-B22547FH

3¹⁄₈

7¹³⁄₁₆

9⁷⁄₈

11¹³⁄₁₆ 4⁷⁄₈

⁵⁄₈

2¹⁄₈

1⁷⁄₈

2⁷⁄₁₆

79.38

198.4

247.6

300.0 123.82 108.0

16

54.0 47.6 160.3 106.4

61.9 70.6

33 31 —

9⁵⁄₁₆ 236.5

11⁷⁄₁₆ 290.5

13¹³⁄₁₆ 5⁵⁄₁₆ 4³⁄₄ 350.8 134.94 120.6

³⁄₄ 20

2³⁄₈ 2¹⁄₄ 7¹⁄₂ 5 60.3 57.2 190.5 127.0

2²¹⁄₃₂ 3 67.5 76.2

48 —

³⁄₄

2¹⁄₄

2⁵⁄₈

3¹⁄₁₆

3⁷⁄₁₆

71 70 —

3⁷⁄₁₆ 4-bolt base

4¹⁄₄

6⁵⁄₁₆

4³⁄₁₆

2²⁵⁄₃₂

3⁷⁄₁₆

EP-B22555FH

EPE-B22555FH

3³⁄₄ 96.25

3¹⁵⁄₁₆ 4



4¹⁄₄

11⁷⁄₈

13

15¹⁄₄

6¹⁄₈

107.95

301.6

330.2

387.4

155.58 114.3

20

57.2

66.7 215.9 150.0

77.8

87.3

4³⁄₁₆ 4⁷⁄₁₆ 4¹⁄₂

P-B22567FHG P-B22571FHG P-B22572FHG

PE-B22567FHG PE-B22571FHG PE-B22572FHG

4³⁄₄

12³⁄₄

14¹⁄₈

16¹⁄₂

6³⁄₄

³⁄₄

2¹⁄₂

2³⁄₄

3³⁄₈

3³⁄₄

120.65

323.9

358.8

419.1 171.45 120.6

20

63.5 69.8 238.1 155.6

85.7 95.2

92 88 87

4¹⁵⁄₁₆ 5

P-B22579FHG P-B22580FHG

PE-B22579FHG PE-B22580FHG

5¹⁄₂ 139.70

14⁵⁄₁₆ 363.6

16¹⁄₈ 409.6

18¹⁄₂ 7¹⁄₄ 5³⁄₈ 469.9 184.15 136.5

⁷⁄₈ 24

2³⁄₄ 3 10⁷⁄₈ 6⁷⁄₈ 69.8 76.2 276.2 174.6

3⁵⁄₈ 4 92.1 101.6

129 128

4¹⁄₂

4³⁄₄

8¹⁄₂

9³⁄₈

5²⁹⁄₃₂

6¹⁄₈

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-64, D-65. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. G Also available with cast steel housings. See page D-14. g LHD sliding base takeup can be drilled for EP-B22500H pillow blocks, see page D-22. † Tolerance, ±.005" (±0.13 mm). X Width dimension for closed end unit. Selection guide, pages D-31, D-32. Load ratings, pages D-33, D-34. Additional information, page D-68.

D-36


EF-B22500H Cast Iron Housing Padded Flange 4-Bolt Mounting Self-aligning Two Spring Locking Collars Factory Adjusted and Sealed Self-Aligning Type E Interchange


Flanged unit number

A

1⁷⁄₁₆

EF-B22523H

1¹¹⁄₁₆

F

G

H

J X

3⁹⁄₁₆ 90.49

¹⁄₂ 12

¹⁄₁₆ 1.6

1¹⁄₄ 31.8

4¹⁄₈ 104.8

5¹⁄₂ 3¹³⁄₁₆ 139.7 96.84

¹⁄₂ 12

¹⁄₈ 3.2

4¹⁄₂ 114.3

4³⁄₈ 111.1

5¹⁄₂ 3¹³⁄₁₆ 139.7 96.84

¹⁄₂ 12

EF-B22535H

5 127.0

4⁷⁄₈ 123.8

6¹⁄₄ 4¹⁄₈ 158.8 104.78

2⁷⁄₁₆

EF-B22539H

5³⁄₈ 136.5

5³⁄₈ 136.5

6³⁄₄ 171.4

2¹¹⁄₁₆ 2¹⁵⁄₁₆

EF-B22543H EF-B22547H

6¹⁄₄

6

7⁵⁄₈

158.8

152.4

193.7 123.82

20

4.8

46.0

137.3

107.3

106.4

7 177.8

8³⁄₄ 222.2

5⁵⁄₁₆ 134.94

³⁄₄ 20

³⁄₃₂ 2.4

1¹⁵⁄₁₆ 49.2

5³⁄₄ 146.0

4¹⁵⁄₃₂ 113.5

5 127.0

60 59 —

B

C

3³⁄₄ 95.2

3¹⁄₂ 88.9

4⁵⁄₈ 117.5

EF-B22527H

4¹⁄₄ 108.0

1¹⁵⁄₁₆

EF-B22531H

2³⁄₁₆

L

M

N

Unit wt.

4¹⁄₃₂ 102.4

2³¹⁄₃₂ 75.4

2¹⁄₂ 63.5

6¹⁄₁₆ 154.0

8 —

1³⁄₈ 34.9

4⁹⁄₃₂ 108.7

3⁹⁄₃₂ 83.3

2³⁄₄ 69.8

7⁷⁄₃₂ 183.4

11 —

¹⁄₈ 3.2

1⁷⁄₁₆ 36.5

4⁵⁄₁₆ 109.5

3⁹⁄₃₂ 83.3

2¹⁵⁄₁₆ 74.6

7⁵⁄₁₆ 185.7

12 —

⁵⁄₈ 16

¹⁄₈ 3.2

1¹⁄₂ 38.1

4⁵⁄₈ 117.5

3¹⁵⁄₃₂ 88.1

3³⁄₈ 85.7

8⁹⁄₃₂ 210.3

16 —

4³⁄₈ 111.12

⁵⁄₈ 16

³⁄₁₆ 4.8

1¹¹⁄₁₆ 42.9

4¹⁵⁄₁₆ 125.4

3²³⁄₃₂ 94.5

3⁵⁄₈ 92.1

8³¹⁄₃₂ 227.8

18 —

4⁷⁄₈

³⁄₄

³⁄₁₆

1¹³⁄₁₆

5¹³⁄₁₆

4⁷⁄₃₂

4³⁄₁₆

10¹⁄₈ 275.2

28 26 —

11²¹⁄₃₂ 296.1

44 —

3⁷⁄₁₆

EF-B22555H

7³⁄₈ 187.3

3¹⁵⁄₁₆ 4

EF-B22563H EF-B22564H

8³⁄₈

7³⁄₄

9³⁄₄

6¹⁄₈

⁷⁄₈

³⁄₃₂

2³⁄₁₆

6⁵⁄₈

5³⁄₁₆

5²⁹⁄₃₂

12³¹⁄₃₂

212.7

196.8

247.6

155.58

24

2.4

55.6

168.3

131.8

150.0

329.4

Please consult for availability. For replacement bearing numbers, see pages D-64, D-65. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. X Width dimension for closed end unit. Selection guide, pages D-31, D-32. Load ratings, pages D-33, D-34. Additional information, page D-68.

D-37

D


DSH-B22500H Extra-Strength Welded Steel Frame Cast Iron Bearing Housing Self-aligning Two Spring Locking Collars Factory Adjusted and Sealed

Dimensions (inches/mm) Shaft Takeup dia. Adjustment number inches 12 304.8 DSH-B22531H-12 1¹⁵⁄₁₆ 18 457.2 DSH-B22531H-18 24 609.6 DSH-B22531H-24

A

B

3¹⁵⁄₁₆ 100.0

27¹⁄₂ 698.5 33¹⁄₂ 850.9 39¹⁄₂ 1003.3

F Bolts

G

H

29¹⁄₂ 749.3 3¹⁄₂ 35¹⁄₂ 901.7 88.9 41¹⁄₂ 1054.1

⁵⁄₈ 16

... ...

1³⁄₄ 44.4

C

E

Unit wt. (lbs.)

U

W X

Z

7³⁄₄ 10⁵⁄₈ 2¹⁵⁄₁₆ 196.8 269.9 74.6

1²⁹⁄₃₂ 48.4

2⁹⁄₃₂ 57.9

4¹⁄₈ 104.8

78 88 98

K

L

M

2³⁄₁₆

12 304.8 18 457.2 24 609.6

DSH-B22535H-12 DSH-B22535H-18 DSH-B22535H-24

4⁷⁄₁₆ 112.7

27¹⁄₂ 698.5 33¹⁄₂ 850.9 39¹⁄₂ 1003.3

29¹⁄₂ 749.3 4¹⁄₂ 35¹⁄₂ 901.7 114.3 41¹⁄₂ 1054.1

⁵⁄₈ 16

... ...

2 50.8

7³⁄₄ 11¹⁄₄ 3³⁄₈ 196.8 285.8 85.7

2¹⁄₁₆ 52.4

2⁷⁄₁₆ 61.9

5¹⁄₄ 133.4

83 93 103

2⁷⁄₁₆

12 304.8 18 457.2 24 609.6

DSH-B22539H-12 DSH-B22539H-18 DSH-B22539H-24

4⁵⁄₈ 117.5

28¹⁄₂ 723.9 34¹⁄₂ 876.3 40¹⁄₂ 1028.7

30¹⁄₂ 774.7 4¹⁄₂ 36¹⁄₂ 927.1 114.3 42¹⁄₂ 1079.5

³⁄₄ 20

... ...

2 50.8

8¹⁄₄ 12¹³⁄₁₆ 3⁵⁄₈ 209.6 325.4 92.1

2³⁄₁₆ 55.6

2⁹⁄₁₆ 65.1

5¹⁄₄ 133.4

105 118 132

2¹⁵⁄₁₆

12 18 24 30 36

304.8 457.2 609.6 762.0 914.4

DSH-B22547H-12 DSH-B22547H-18 DSH-B22547H-24 DSH-B22547H-30 DSH-B22547H-36

5¹⁄₈ 130.2

30¹⁄₂ 774.7 36¹⁄₂ 927.1 42¹⁄₂ 1079.5 48¹⁄₂ 1231.9 54¹⁄₂ 1384.3

32¹⁄₂ 825.5 38¹⁄₂ 977.9 4¹⁄₂ 44¹⁄₂ 1130.3 114.3 50¹⁄₂ 1282.7 56¹⁄₂ 1435.1

⁵⁄₈ 16

2 50.8

2 50.8

9¹⁄₄ 13¹⁵⁄₁₆ 4³⁄₁₆ 235.0 354.0 106.4

2⁷⁄₁₆ 61.9

2²⁵⁄₃₂ 70.6

5¹⁄₄ 133.4

125 140 155 170 185

3⁷⁄₁₆

12 18 24 30 36

304.8 457.2 609.6 762.0 914.4


5⁵⁄₈ 142.9

32 38 44 50 56

812.8 965.2 1117.6 1270.0 1422.4

34¹⁄₄ 40¹⁄₄ 46¹⁄₄ 52¹⁄₄ 58¹⁄₄

870.0 1022.4 4¹⁄₂ 1174.8 114.3 1327.2 1479.6

³⁄₄ 20

2 50.8

2 50.8

10 15¹⁄₁₆ 5 254.0 382.6 127.0

2²¹⁄₃₂ 67.5

3 76.2

5⁵⁄₈ 142.9

146 162 178 194 210

3¹⁵⁄₁₆

12 18 24 30 36

304.8 457.2 609.6 762.0 914.4


7 177.8

36 42 48 54 60

914.4 1066.8 1219.2 1371.6 1524.0

38¹⁄₂ 44¹⁄₂ 50¹⁄₂ 56¹⁄₂ 62¹⁄₂

977.9 1130.3 5¹⁄₂ 1282.7 139.7 1435.1 1587.5

³⁄₄ 20

2¹⁄₂ 63x5

2¹⁄₄ 57.2

12 17¹⁄₁₆ 5²⁹⁄₃₂ 304.8 433.4 150.0

3¹⁄₁₆ 77.8

3⁷⁄₁₆ 87.3

6⁷⁄₈ 174.6

260 278 296 314 332

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-64, D-65. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. X Width dimension for closed end unit. Selection guide, pages D-31, D-32. Load ratings, pages D-33, D-34. Additional information, page D-68.

D-38


CSE-B22500H Steel Housing Fixed or Expansion Self-aligning Two Spring Locking Collars Factory Adjusted and Sealed

Fixed G Location

Expansion G Location


A

B

D

L

M

P

U

Unit wt. (lbs./kg.)

1⁷⁄₁₆

CSE-B22523H

3.124 79.35

2³⁄₁₆ 55.56

3⁹⁄₁₆ 90.49

3⁹⁄₁₆ 90.5

2¹⁄₂ 63.5

¹¹⁄₁₆ 17.5

1²⁵⁄₃₂ 45.2

4.2 —

1¹¹⁄₁₆

CSE-B22527H

3.636 92.35

2⁷⁄₁₆ 61.91

3¹³⁄₁₆ 96.84

3¹³⁄₁₆ 96.8

2³⁄₄ 69.8

¹¹⁄₁₆ 17.5

1²⁹⁄₃₂ 48.4

5.6 —

1¹⁵⁄₁₆

CSE-B22531H

3.833 97.36

2²⁵⁄₆₄ 60.72

3¹³⁄₁₆ 96.84

3¹³⁄₁₆ 96.8

2¹⁵⁄₁₆ 74.6

¹¹⁄₁₆ 17.5

1²⁹⁄₃₂ 48.4

6.1 —

2 2³⁄₁₆

CSE-B22532H CSE-B22535H

4.227 107.36

2¹⁄₂ 63.50

4¹⁄₈ 104.78

4¹⁄₈ 104.8

3³⁄₈ 85.7

¹³⁄₁₆ 20.6

2¹⁄₁₆ 52.4

9.0 8.7

2⁷⁄₁₆

CSE-B22539H

4.621 117.37

2⁵⁄₈ 66.68

4³⁄₈ 111.12

4³⁄₈ 111.1

3⁵⁄₈ 92.1

⁷⁄₈ 22.2

2³⁄₁₆ 55.6

10.1 —

2¹¹⁄₁₆ 2¹⁵⁄₁₆


5.407 137.34

3¹⁄₈ 79.38

4⁷⁄₈ 123.82

4⁷⁄₈ 123.8

4³⁄₁₆ 106.4

⁷⁄₈ 22.2

2⁷⁄₁₆ 61.9

16.4 15.3

3⁷⁄₁₆

CSE-B22555H

6.194 157.33

3⁷⁄₁₆ 87.31

5⁵⁄₁₆ 134.94

5⁵⁄₁₆ 134.9

5 127.0

¹⁵⁄₁₆ 23.8

2²¹⁄₃₂ 67.5

21.1 —

3¹⁵⁄₁₆ 4


7.375 187.32

4 101.60

6¹⁄₈ 155.58

6¹⁄₈ 155.6

5²⁹⁄₃₂ 150.0

1¹⁄₁₆ 27.0

3¹⁄₁₆ 77.8

36.1 35.6

4³⁄₁₆ 4⁷⁄₁₆ 4¹⁄₂

CSE-B22567H CSE-B22571H CSE-B22572H CSE-B225M110H CSE-B225M115H

7.769

4⁹⁄₁₆

6³⁄₄

6³⁄₄

6¹⁄₈

1³⁄₃₂

3³⁄₈

197.33

115.89

171.45

171.4

155.6

27.8

85.7

8.753

4⁷⁄₈

7¹⁄₄

7¹⁄₄

6⁷⁄₈

1³⁄₁₆

3⁵⁄₈

222.33

123.82

184.15

184.2

174.6

30.2

92.1

110 115 4¹⁵⁄₁₆ 5 125

Cartridge unit number G


52.8 50.6 49.9 — — 55.3 54.7 —

Bold face items are normally available from stock; please consult for availability of non-stock items. Steel cartridge units cannot be disassembled. For replacement, use entire new unit. All units available with type E lip seals. G Hole for fixed location and slot for expansion location in the same housing. † Tolerance, 4" and smaller shaft diameters, +.000" –.002" (+0.00 mm –0.05 mm); Larger than 4" shaft, +.000 –.003" (+0.00 mm –0.08 mm); Bore tolerance for mounting, +.002" –.000" (+0.05 mm –0.00 mm). * Plug diameter .531" (13.49 mm), engagement depth .125" ±.015" (3.18 ±.038 mm), allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position on expansion units. Selection guide, pages D-31, D-32. Load ratings, pages D-31, D-34. Additional information, page D-68.

D-39


B22500HL Self-aligning Two Spring Locking Collars

Dimensions (inches/mm) A Shaft Sizes mm inches 1⁷⁄₁₆

Bearing number *

mm +0.025 –0.000

inches +.0010" –.0000"

B +.0010" –.000" +0.025 mm –0.000 mm 2.8345 71.996

C ±.025" ±0.64 mm ‡

E Shoulder diameter

H

M

1.310 33.27

2¹⁄₂ 63.5

3⁹⁄₁₆ 90.49

2¹⁄₂ 63.5

R Housing fillet

T

Y

1.745 44.32

.062 1.57

⁵⁄₈ 15.9

1²⁵⁄₃₂ 45.24

2.4 —

N

Unit wt. (lbs./kg.)

B22523HL

1.4375

1¹¹⁄₁₆ B22527HL

1.6875

3.3464 84.998

1.578 40.08

2⁷⁄₈ 73.0

3¹³⁄₁₆ 96.84

2³⁄₄ 69.8

2.027 51.48

.062 1.57

⁵⁄₈ 15.9

1²⁹⁄₃₂ 48.42

3.5 —

1¹⁵⁄₁₆ B22531HL

1.9375

3.5433 90.000

1.526 38.76

3³⁄₁₆ 81.0

3¹³⁄₁₆ 96.84

2¹⁵⁄₁₆ 74.6

2.307 58.59

.078 1.98

⁵⁄₈ 15.9

1²⁹⁄₃₂ 48.42

3.8 —

2 2³⁄₁₆

B22532HL B22535HL

2.0000 2.1875

3.9370 100.000

1.656 42.06

3¹⁄₂ 88.9

4¹⁄₈ 104.78

3³⁄₈ 85.7

2.620 66.55

.062 1.57

³⁄₄ 19.0

2¹⁄₁₆ 52.39

6.2 5.5

2⁷⁄₁₆

B22539HL

2.4375

4.3307 110.000

1.750 44.45

3⁷⁄₈ 98.4

4³⁄₈ 111.12

3⁵⁄₈ 92.1

2.901 73.69

.078 1.98

¹³⁄₁₆ 20.6

2³⁄₁₆ 55.56

7.2 —

2¹¹⁄₁₆ B22543HL 2¹⁵⁄₁₆ B22547HL

2.6875 2.9375

5.1172 129.977

2.125 53.98

4¹⁷⁄₃₂ 115.1

4⁷⁄₈ 123.82

4³⁄₁₆ 106.4

3.370 85.60

.078 1.98

¹³⁄₁₆ 20.6

2⁷⁄₁₆ 61.91

11.6 10.6

3⁷⁄₁₆

B22555HL

3.4375

5.9045 149.974

2.313 58.75

5¹¹⁄₃₂ 135.7

5⁵⁄₁₆ 134.94

5 127.0

3.975 100.97

.125 3.18

²⁷⁄₃₂ 21.4

2²¹⁄₃₂ 67.47

15.7 —

3¹⁵⁄₁₆ B22563HL 4 B22564HL

3.9375 4.0000

7.0856 179.974

2.750 69.85

6³⁄₈ 161.9

6¹⁄₈ 155.58

5²⁹⁄₃₂ 150.0

4.561 115.85

.125 3.18

³¹⁄₃₂ 24.6

3¹⁄₁₆ 77.79

26.9 26.4

4³⁄₁₆ 4⁷⁄₁₆ 4¹⁄₂

4.1875 4.4375 4.5000

7.4792

2.974

6⁵⁄₈

6³⁄₄

6¹⁄₈

5.000

.125

1

3³⁄₈

38.2 36.0 35.3

189.972

75.54

168.3

171.45

155.6

127.00

3.18

25.4

85.72

8.4634

3.437

7¹⁄₂

7¹⁄₄

6⁷⁄₈

5.594

.125

1³⁄₃₂

3⁵⁄₈

214.970

87.30

190.5

184.15

174.6

142.08

3.18

27.8

92.08

110 115

B22567HL B22571HL B22572HL B225M110HL B225M115HL

125

4¹⁵⁄₁₆ B22579HL 5 B22580HL B225M125HL

110.000 115.000 4.9375 5.0000 125.000

16.3 16.0 41.6 40.7 18.4

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearings for expansion units see CSE-B22500H unit shown on page D-39. All bearings available with type E lip seals. * Includes bearing, two floating labyrinth seals, and two spring locking collars. ‡ Use shims, threaded cover, or spacer ring to provide for adjustment. Housing must allow clearance for this adjustment on dimension C. Selection guide, pages D-31, D-32. Load ratings, pages D-33, D-34. Additional information, page D-68.

D-40

Max MountTM Series B22600 Spherical Roller Bearing Units Series B22600 adapter mounted spherical roller bearing units will shafts carrying substantial radial or combination radial and thrust loads. These units are adaptable for conveyors, elevators, general industrial machinery, heavier duty fans and blowers, power transmission applications, ditchers, trenchers, pavers and other applications. They differ from series B22400 & B22500 units in that they have a tapered adapter mounting system. Series B22600 units are easy to mount, sealed, prelubricated and do not require bearing adjustment during mounting.

a Tapered adapter mounting system. b Choice of two seals, floating labyrinth Type H, and spring-loaded lip Type E. c Long inner ring for high stability and load .

c b a

d Self-aligning double row spherical roller bearing adjusts ±2° to allow for alignment variations between shaft and ing structure.

d

e Double contoured retainer pockets assure accurate roller guidance and positive roller control.

e f

f Sturdy, compact one-piece high-test cast iron housing. g Slotted bolt holes in pillow block bases facilitate mounting; bottom of base is machined.

g

D-41

Spherical Roller Bearings Series B22600 self-aligning double row spherical roller bearings have high LDN values and are designed to distribute the load over the symmetrical rollers, assuring positive tracking and smooth operation. The large roller complement provides high capacity for radial or combined radialthrust loads. Osculation clearance at the

ends of the rollers compensates for shock loads and prevents destructive edge loading. These precision bearings with double contoured retainer pockets are designed to meet a broad range of application requirements.

Adapter Mount The B22600 adapter mounting provides better concentricity and shaft control, increasing service life. Where Turned, Ground and Polished shafting is the norm on collar-mounted units, the maximized mounting power of the B22600 allows for Commercial Grade Shafting compatibility (a commonly used grade of shafting due to its price and availability).

Shaft damage from set screws is eliminated with the B22600's improved mounting design. Shaft damage from the bearing inner ring fretting to the shaft (the result of a clearance or loose fit) is also eliminated. These improvements facilitate easier bearing removal, replacement bearing installation and longer shaft service life.



TYPE H SEAL

TYPE E SEAL

One-Piece Cast Iron or Cast Steel Housings Compact one-piece housings provide for strength and load . Scientifically contoured housing design provides superior rigidity. Cast iron or cast steel pillow blocks have two or four slotted bolt holes with ample space provided for drilling dowel pin holes. Flanged and flanged cartridge units have drilled

mounting holes and machined mounting surfaces for maximum stability. Cartridge units have steel housings and are finished to precision tolerances. Takeup units have machined slots for smooth, precise operation. Pillow blocks, flanged, and cartridge units are available for fixed or expansion operation.

D-42

Max MountTM Series B22600 Spherical Roller Bearing Units Pillow Blocks, cast iron EP-B22600H*, EPE-B22600H*, EP-B22600FH*, EPE-B22600FH* P-B22600H, PE-B22600H, P-B22600FH, PE-B22600FH Self-aligning 2-bolt base pillow blocks for shaft sizes 1⁷⁄₁₆" through 3¹⁵⁄₁₆" and 4-bolt base pillow blocks for shaft sizes 1¹⁵⁄₁₆" through 4¹⁵⁄₁₆". Units are available for fixed or expansion mounting. Load ratings on pages D-47 and D-48. Dimensions on pages D-49 through D-52. Additional information on page D-69. *Self-aligning Type E Interchange

Pillow Blocks, cast steel PK-B22600H, PKE-B22600H, PK-B22600FH, PKE-B22600FH Self-aligning 2-bolt base pillow blocks for shaft sizes 1⁷⁄₁₆" through 3¹⁵⁄₁₆", 4-bolt base pillow blocks for shaft sizes 1¹⁵⁄₁₆" through 4¹⁵⁄₁₆". Units are available for fixed or expansion mounting. Load ratings on pages D-47 and D-48. Dimensions on pages D-53 and D-54. Additional information on page D-69.

Flanged Units, cast iron EF-B22600H,* FB-B22600H F-B22600H, FE-B22600H Self-aligning flanged units for shaft sizes 1⁷⁄₁₆" through 3¹⁵⁄₁₆". Units are available for fixed or expansion mounting. Load ratings on pages D-47 and D-48. Dimensions on pages D-56 through D-58. Additional information on page D-69. *Self-aligning Type E Interchange

Flanged Cartridge Units, cast iron FC-B22600H* Self-aligning flanged cartridge units for shaft sizes 1⁷⁄₁₆" through 3¹⁵⁄₁₆". Units are available for fixed mounting. Load ratings on pages D-47 and D-48. Dimensions on page D-59. Additional information on page D-69. *Self-aligning Type E Interchange

D-43

Cartridge Units, steel CSE-B22600H Self-aligning cartridge units. Steel housings for shaft sizes 1⁷⁄₁₆" through 3¹⁵⁄₁₆". Steel cartridge units are available for fixed or expansion mounting. Load ratings on pages D-47 and D-48. Dimensions on pages D-55. Additional information on page D-69.

Takeup Units, cast iron T-B22600H Self-aligning units for takeup applications with shaft sizes 1⁷⁄₁₆" through 3¹⁵⁄₁₆". Fixed units without frames, guides, or adjusting screws. Load ratings on pages D-47 and D-48. Dimensions on page D-60. Additional information on page D-69.

Replacement Bearings B22600HL Self-aligning double row spherical roller bearings with adapter assembly for shaft sizes 1⁷⁄₁₆" through 4¹⁵⁄₁₆". Load ratings on pages D-47 and D-48. Dimensions on page D-61. Additional information on page D-69.

D-44

Selection

Max MountTM Series B22600 To select a bearing, determine the applied radial load, the applied thrust load, the desired Rating Life, and applicable operating conditions. The procedure shown here will aid in selecting a bearing to meet an L₁₀ design life. The formulas for calculating life expectancy should be used to determine the Rating Life L₁₀ for the bearing selected.

The selection procedures and rating formulas shown here are in agreement with The American Bearing Manufacturers Association Standards and ANSI/ABMA Standards STD 11-1990. Ratings are based on fatigue life. The Rating Life L₁₀ or fatigue life at 90% reliability is the usual basis for bearing selection.

Bearing Selection Step 1 Determine an appropriate L₁₀ design life. Operating time, Type of service hours per year Light seasonal usage Heavy seasonal usage Industrial—8 hour shift Industrial—16 hour shift Industrial—continuous

Design life, years

500 to 750 1,400 to 1,600 2,000 4,000 8,700

3-5 4-6 10 10 10


from Table 1.



P

using

from Step 2


Calculate the equivalent radial load P P = XFr + YFa If


If



P using

from Step 2.

Consult Table 2, page D-47, basic load rating. If a smaller bearing meets, or nearly meets, the required C, its life expectancy can be calculated. Note: If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp.

D-45


Selection

Max MountTM Series B22600 symbols for formulas: C Co e Fa Fr L₁₀ n P X Y

= = = = = = = = = =

basic formulas:


= L₁₀ u n u 60 1,000,000

3/10

10/3

u1,000,000 n u 60

L₁₀ =



a

Speed, n 50

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000


ratio

Bearing life, hours L₁₀ 1.93 2.11 2.25 2.38 2.59 2.77 2.93 3.07 3.19 3.31 3.42 3.65 3.86 4.04 4.20 4.36 4.50 4.75 4.97 5.18 5.36 5.54 6.25 6.81

100

200

300

400

500

600

700

800

2.38 2.93 3.31 3.61 2.59 3.19 3.61 3.93 2.77 3.42 3.86 4.20 2.93 3.61 4.07 4.44 3.19 3.93 4.44 4.84 3.42 4.20 4.75 5.18 3.61 4.44 5.02 5.47 3.78 4.65 5.25 5.73 3.93 4.84 5.47 5.96 4.07 5.02 5.66 6.18 4.20 5.18 5.85 6.37 4.50 5.54 6.25 6.81 4.75 5.85 6.60 7.20 4.97 6.12 6.92 7.54 5.18 6.37 7.20 7.85 5.36 6.60 7.46 8.13 5.54 6.81 7.70 8.39 5.85 7.20 8.13 8.86 6.12 7.54 8.51 9.28 6.37 7.85 8.86 9.66 6.60 8.13 9.18 10.00 6.81 8.39 9.48 10.30 7.70 9.48 10.70 11.70 8.39 10.30 11.70 12.70

3.86 4.20 4.50 4.75 5.18 5.54 5.85 6.12 6.37 6.60 6.81 7.29 7.70 8.06 8.39 8.69 8.97 9.48 9.92 10.30 10.70 11.00 12.50 13.60

4.07 4.44 4.75 5.02 5.47 5.85 6.18 6.47 6.73 6.97 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.00 10.50 10.90 11.30 11.70 13.20 14.40

4.27 4.65 4.97 5.25 5.73 6.12 6.47 6.77 7.05 7.30 7.54 8.06 8.51 8.92 9.28 9.61 9.92 10.50 11.00 11.40 11.80 12.20 13.80 15.00

4.44 4.84 5.18 5.47 5.96 6.37 6.73 7.05 7.34 7.60 7.85 8.39 8.86 9.28 9.66 10.00 10.30 10.90 11.40 11.90 12.30 12.70 14.40 15.70

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

4.60 5.02 5.36 5.66 6.18 6.60 6.97 7.30 7.60 7.88 8.13 8.69 9.18 9.61 10.00 10.40 10.70 11.30 11.80 12.30 12.80 13.20 14.90 16.20

1000 1200 1500 1800 2400 3000 3600 6000 4.75 5.18 5.54 5.85 6.37 6.81 7.20 7.54 7.85 8.13 8.39 8.97 9.48 9.92 10.30 10.70 11.00 11.70 12.20 12.70 13.20 13.60 15.40 16.70

5.02 5.47 5.85 6.18 6.73 7.20 7.60 7.96 8.29 8.59 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.30 12.90 13.40 13.90 14.40 16.20 17.70

5.36 5.85 6.25 6.60 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.10 10.70 11.20 11.70 12.10 12.50 13.20 13.80 14.40 14.90 15.40 17.30 18.90

5.66 6.18 6.60 6.97 7.60 8.13 8.59 8.99 9.36 9.70 10.00 10.70 11.30 11.80 12.30 12.80 13.20 13.90 14.60 15.20 15.70 16.20 18.30 20.00



If


For values of e, X1, Y1, X2, and Y2, see Table 2, page D-47. Step 2 Calculate the ratio of the basic load rating C to the equivalent radial load. C P Step 3 Approximate the bearing life from Table 1.

Life Adjustment

Speed, n 900


6.18 6.73 7.20 7.60 8.29 8.86 9.36 9.80 10.20 10.60 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.20 15.90 16.50 17.10 17.70 20.00 21.80

6.60 7.20 7.70 8.13 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.50 13.20 13.80 14.40 14.90 15.40 16.20 17.00 17.70 18.30 18.90 21.40 23.30

6.97 7.60 8.13 8.59 9.36 10.00 10.60 11.10 11.50 11.90 12.30 13.20 13.90 14.60 15.20 15.70 16.20 17.10 17.90 18.70 19.40 20.00 22.60 24.60

8.13 8.86 9.48 10.00 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.40 16.20 17.00 17.70 18.30 18.90 20.00 20.90 21.80 22.60 23.30 26.30 28.70



,


Load Ratings

Max MountTM Series B22600 Table 2 • Load ratings and speed limits Shaft diameter inches

Bearing size number

C₀ Static load rating newtons


C Basic load rating pounds

newtons

pounds

H and E seals

me

e

Le

X₁

Y₁

X₂

Y₂

1⁷⁄₁₆

B22623

93 200

20900

64 900

14600

2750

.44

1.00

1.54

.67

2.29

1¹⁵⁄₁₆

B22631

147 700

33200

94 300

21200

2150

.40

1.00

1.68

.67

2.50

2³⁄₁₆

B22635

197 500

44400

117 400

26400

1950

.40

1.00

1.68

.67

2.50

2⁷⁄₁₆

B22639

238 000

53500

139 700

31400

1750

.38

1.00

1.80

.67

2.68

2¹¹⁄₁₆ 2¹⁵⁄₁₆

B22643 B22647

318 000

71500

185 900

41800

1500

.38

1.00

1.79

.67

2.67

3⁷⁄₁₆

B22655

403 400

90700

226 800

51000

1250

.38

1.00

1.77

.67

2.64

3¹⁵⁄₁₆

B22663

609 400

137000

351 800

79100

1100

.36

1.00

1.88

.67

2.79

4⁷⁄₁₆

B22671

790 200

178000

419 400

94300

1000

.38

1.00

1.80

.67

2.68

4¹⁵⁄₁₆

B22679

944 700

212000

520 400

117000

900

.37

1.00

1.83

.67

2.72

If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp. For vertical shift application, consult Link-Belt Bearing Division, Rexnord Corp. V Based on grease lubrication and moderate load. Additional information, page D-69.

D-47

Load Ratings

Max MountTM Series B22600 Table 3 • Radial load ratings in pounds at various RPM for appropriate L₁₀ life hours Shaft diameter inches

1⁷⁄₁₆

1¹⁵⁄₁₆

Bearing size number

B22623

B22631



100

200

300

500

700

900

1000

1200

1500

8000 20000 40000 100000

.... .... 3470 2630

.... 3470 2820 2140

.... 2820 2290 1740

3290 2500 2020 1540

2820 2140 1740 1320

2540 1930 1570 1200

2360 1800 1450 1100

2290 1740 1410 1070

2170 1640 1330 1010

2020 1540 1250 950

1920 1450 1180 900

1860 1410 1140 872

8000 20000 40000

.... .... 5040

.... 5040 4100

.... 4100 3320

4770 3620 2940

4100 3110 2520

3700 2810 2280

3430 2600 2110

3320 2520 2050

3140 2390 1940

2940 2230 1810

2790 2110 1720

2700 2050 1670

100000

3830

3110

2520

2230

1910

1730

1600

1550

1480

1380

1300

1270

.... .... 6280 4770

.... 6280 5100 3870

.... 5100 4140 3140

5940 4510 3670 2790

5100 3870 3140 2390

4600 3500 2840 2160

4280 3240 2630 2000

4140 3140 2550 1940

3920 2980 2410 1830

3670 2790 2260 1710

3470 2630 2140 1620

2³⁄₁₆

B22635

8000 20000 40000 100000

2⁷⁄₁₆

B22639

8000 20000 40000 100000

.... .... 7470 5670

.... 7470 6070 4600

.... 6070 4920 3740

7070 5370 4360 3310

6070 4600 3740 2840

5480 4170 3380 2570

5090 3860 3130 2380

4920 3740 3030 2300

4660 3540 2880 2190

4360 3310 2690 2040

2¹¹⁄₁₆ 2¹⁵⁄₁₆

B22643 B22647

8000 20000 4000 100000

.... .... 9940 7550

.... 9940 8070 6130

.... 8070 6550 4980

9410 7150 5800 4410

8070 6130 4980 3780

7300 5540 4500 3420

6770 5140 4180 3170

6550 4980 4040 3070

6200 4710 3830 2910

5800 4410 3580 2720

3⁷⁄₁₆

B22655

8000 20000 40000 100000

.... .... 12100 9210

.... 12100 9850 7480

.... 9850 8000 6080

11400 8720 7090 5380

9850 7480 6080 4610

8900 6770 5500 4170

8250 6270 5100 3870

8000 6080 4930 3750

7580 5750 4670 3550

3¹⁵⁄₁₆

B22663

8000 20000 40000 100000

.... .... 18800 14200

.... 18800 15200 11600

.... 15200 12400 9420

17800 13500 11000 8340

15200 11600 9420 7160

13800 10400 8520 6470

12800 9730 7900 6000

12400 9420 7650 5810

8000 4⁷⁄₁₆

B22671

.... 20000

.... .... 40000

.... 22400 22400 100000

21200 18200 18200 17000

18200 15100 14800 13800

16400 13800 13100 11200

15200 12500 11200 9950

14800 11600 10100 8530

11200 9420 7710

9120 7150

.... .... 40000

.... 27800 27800 100000

26300 22500 22500 2100

22500 20000 18300 17100

20400 17100 16200 13900

18900 15500 13900 12300

14300 12600 10500

11700 9580

8880

8000 4⁵⁄₁₆

B22679

.... 20000

1800

2000

2500

3000

3500

1740 1320 1070 815

6930

If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp.

D-48


Max MountTM P-B22600H, PE-B22600H Cast Iron Housing 2-bolt Base Fixed or Expansion Self-aligning Adapter Mounted Factory Adjusted and Sealed Fixed

Expansion


Pillow block numberg

A †

1⁷⁄₁₆

P-B22623H

PE-B22623H

1⁷⁄₈ 47.62

5 127.0

6⁷⁄₈ 2.708 174.6 68.78

2¹⁄₄ 57.2

1¹⁵⁄₁₆

P-B22631H

PE-B22631H

2¹⁄₄ 57.15

6¹⁄₄ 8³⁄₈ 3.075 158.8 212.7 78.10

2¹⁄₂ 63.5

⁵⁄₈ 16

1³⁄₈ 34.9

4⁹⁄₁₆ 115.9

4⁹⁄₁₆ 115.9

2³¹⁄₃₂ 75.4

⁴³⁄₆₄ 17.1

¹⁵⁄₁₆ 23.8

1⁵⁵⁄₆₄ 2⁹⁄₃₂ 47.2 57.9

12

6³⁄₄ 8⁷⁄₈ 3.159 171.4 225.4 80.24

2⁹⁄₁₆ 65.1

⁵⁄₈ 16

1⁵⁄₈ 41.3

5 127.0

5 127.0

3⁵⁄₃₂ 80.2

²¹⁄₃₂ 16.7

¹⁵⁄₁₆ 23.8

1⁹⁄₃₂ 30.7

2⁷⁄₁₆ 61.9

14 6.4

Expansion

B

C

D P

E

L

F Bolts ¹⁄₂ 12

Fixed

H L 1³⁄₁₆ 30.2

3¹¹⁄₁₆ 93.7

3⁷⁄₈ 98.4

2¹⁄₄ 57.2

⁹⁄₁₆ 14.3

W Unit wt. X (lbs./kg.) ¹³⁄₁₆ 1⁴³⁄₆₄ 2³⁄₁₆ 7 20.6 42.5 55.6 3.2

Fixed Expansion

M

P P

S

U P

5.4

2³⁄₁₆

P-B22635H

PE-B22635H

2¹⁄₂ 63.50

2⁷⁄₁₆

P-B22639H

PE-B22639H

2³⁄₄ 69.85

7¹⁄₈ 9¹⁄₄ 3.362 181.0 235.0 85.39

2¹¹⁄₁₆ 68.3

⁵⁄₈ 16

1⁵⁄₈ 41.3

5¹⁄₂ 139.7

5¹⁄₂ 139.7

3⁵⁄₈ 92.1

⁴³⁄₆₄ 17.1

¹⁵⁄₁₆ 23.8

2³⁄₆₄ 52.0

2⁹⁄₁₆ 65.1

17

3¹⁄₄

8¹⁄₈

10⁷⁄₁₆ 3.863

3³⁄₁₆

³⁄₄

2

6⁷⁄₁₆

6⁷⁄₁₆

4⁵⁄₃₂

³⁄₄

1¹⁄₁₆

2¹⁹⁄₆₄ 2²⁵⁄₃₂

29 27

82.55

206.4 265.1 98.12

81.0

20

57.2

163.5

163.5

105.6 19.1

27.0

58.3

70.6 3 76.2

2¹¹⁄₁₆ 2¹⁵⁄₁₆

P-B22643H P-B22647H

PE-B22643H PE-B22647H

3⁷⁄₁₆

P-B22655H

PE-B22655H

3³⁄₄ 95.25

10 13 4.306 3⁷⁄₁₆ 254.0 330.2 109.37 87.3

⁷⁄₈ 24

2¹⁄₄ 57.2

7¹⁄₂ 190.5

7¹⁄₂ 190.5

4¹⁵⁄₁₆ ⁷⁄₈ 125.4 22.2

1⁵⁄₈ 41.3

2⁹⁄₁₆ 65.1

PE-B22663H

4¹⁄₄ 107.95

11³⁄₄ 15¹⁄₄ 4.944 4 298.4 387.4 125.58 101.6

1 24

2⁵⁄₈ 66.7

8¹⁄₂ 215.9

8¹⁄₂ 215.9

5⁷⁄₁₆ ¹⁵⁄₁₆ 138.1 23.8

2¹⁄₄ 57.2

2¹⁵⁄₁₆ 3⁷⁄₁₆ 74.6 87.3

3¹⁵⁄₁₆

P-B22663H

7.7

13.2 12.2 42 19.1 59 26.9

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-66, D-67. Selection guide, page D-45, D4-6. Lubrication fitting tap size, ¹⁄₈" PT. Load ratings, pages D-47, D-48. All units available with type E lip seals. Additional information, page D-69. * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. † Tolerance, ±.005" (±0.13 mm). L Dimension H for PE-B22639H is 1³⁄₄"; Dimension H for PE-B22643H thru PE-B22647H is 2¹⁄₄". X Width dimension for closed end unit. g LHD Sliding Base Takeup can be drilled for P-B22600H pillow blocks, see page D-22 P Dimensions based on unmounted condition.

D-49


Max MountTM P-B24600FH, PE-B22600FH Cast Iron Housing 4-bolt Base Fixed or Expansion Self-aligning Adapter Mounted Factory Adjusted and Sealed

Fixed

Expansion



Expansion

1¹⁵⁄₁₆

P-B22631FH

PE-B22631FH

2³⁄₁₆

P-B22635FH

PE-B22635FH

2⁷⁄₁₆

P-B22639FH

PE-B22639FH

2¹¹⁄₁₆ 2¹⁵⁄₁₆

P-B22643FH P-B22647FH


3⁷⁄₁₆

P-B22655FH

PE-B22655FH

3¹⁵⁄₁₆

P-B22663FH

PE-B22663FH

4⁷⁄₁₆

P-B22671FH

PE-B22671FH

4¹⁵⁄₁₆

P-B22679FH

PE-B22679FH

A †

B

C

E

F Bolts

G

H

L

2¹⁄₄ 57.15 2¹⁄₂ 63.50 2³⁄₄ 69.85

D P 6¹⁄₄ 8³⁄₈ 3.075 158.8 212.7 78.10 6³⁄₄ 8⁷⁄₈ 3.159 171.4 225.4 80.24 7¹⁄₈ 9¹⁄₄ 3.362 181.0 235.0 85.39

3³⁄₁₆ 81.0 3¹⁄₄ 82.6 3³⁄₈ 85.7

¹⁄₂ 12 ¹⁄₂ 12 ¹⁄₂ 12

1¹⁹⁄₃₂ 40.5 1¹¹⁄₁₆ 42.9 1³⁄₄ 44.4

1³⁄₈ 34.9 1⁵⁄₈ 41.3 1³⁄₄ 44.4

4⁹⁄₁₆ 115.9 5 127.0 5¹⁄₂ 139.7

3¹⁄₄

8¹⁄₈

3³⁄₄

⁵⁄₈

1⁷⁄₈

2¹⁄₄

6⁷⁄₁₆

82.55

206.4 265.1 98.12

95.2

16

47.6

57.2

3³⁄₄ 95.25 4¹⁄₄ 107.95 4³⁄₄ 120.65 5¹⁄₂ 139.70

10 254.0 12¹⁄₂ 317.5 13¹⁄₂ 342.9 15¹⁄₂ 393.7

4¹⁄₈ 104.8 4¹⁄₂ 114.3 4³⁄₄ 120.6 5³⁄₈ 136.5

³⁄₄ 20 ³⁄₄ 20 ³⁄₄ 20 ⁷⁄₈ 24

2 50.8 2¹⁄₄ 57.2 2¹⁄₂ 63.5 2³⁄₄ 69.8

2¹⁄₄ 57.2 2⁵⁄₈ 66.7 2³⁄₄ 69.8 3 76.2

10⁷⁄₁₆ 3.863

13 330.2 15¹⁄₄ 387.4 16¹⁄₂ 419.1 18¹⁄₂ 469.9

4.306 109.37 4.944 125.58 5.534 140.56 6.056 153.82

M 2³¹⁄₃₂ 75.4 3⁵⁄₃₂ 80.2 3⁵⁄₈ 92.1

P P ⁴³⁄₆₄ 17.1 ²¹⁄₃₂ 16.7 ⁴³⁄₆₄ 17.1

S

U P ¹³⁄₁₆ 1⁵⁵⁄₆₄ 20.6 47.2 ¹³⁄₁₆ 1⁹⁄₃₂ 20.6 30.7 ¹³⁄₁₆ 2³⁄₆₄ 20.6 52.0

4⁵⁄₃₂

³⁄₄

W X

Unit wt. (lbs./kg.)

2⁹⁄₃₂ 57.9 2⁷⁄₁₆ 61.9 2⁹⁄₁₆ 65.1

13

¹⁵⁄₁₆

2¹⁹⁄₆₄ 2²⁵⁄₃₂

30 29

163.5 105.6 19.1

23.8

58.3 70.6

7¹⁄₂ 190.5 8¹⁄₂ 215.9 9³⁄₈ 238.1 10⁷⁄₈ 276.2

1¹⁄₂ 38.1 1¹⁄₄ 31.8 1³⁄₈ 34.9 1¹⁄₂ 38.1

2⁹⁄₁₆ 65.1 2¹⁵⁄₁₆ 74.6 3¹¹⁄₃₂ 84.9 3²¹⁄₃₂ 92.9

4¹⁵⁄₁₆ 125.4 5⁷⁄₁₆ 138.1 6¹⁄₈ 155.6 6³⁄₄ 171.4

⁷⁄₈ 22.2 ¹⁵⁄₁₆ 23.8 1³⁄₃₂ 27.8 1³⁄₁₆ 30.2

3 76.2 3⁷⁄₁₆ 87.3 3³⁄₄ 95.2 4 101.6

5.9 15 6.8 19 8.6

13.6 13.2 43 19.5 67 30.3 88 39.9 128 58.1

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-66 through D-67. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. † Tolerance, ±.005" (±0.13 mm). * Expansion unit allows axial movement of ³⁄₁₆” (4.8 mm) in either direction from centered position shown. P Dimensions based on unmounted condition. X Width dimension for closed end unit. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-50


Max MountTM EP-B22600H, EPE-B22600H Cast Iron Housing 2-Bolt Base Fixed or Expansion Self-aligning Adapter Mounted Factory Adjusted and Sealed Self-Aligning Type E Interchange

Fixed

Expansion


Pillow block numberg Fixed Expansion

1⁷⁄₁₆

EP-B22623H

EPE-B22623H

1¹⁵⁄₁₆

EP-B22631H

EPE-B22631H

2³⁄₁₆

EP-B22635H

EPE-B22635H

2⁷⁄₁₆

EP-B22639H

EPE-B22639H

2¹¹⁄₁₆ 2¹⁵⁄₁₆

EP-B22643H EP-B22647H

EPE-B22643H EPE-B22647H

3⁷⁄₁₆

EP-B22655H

EPE-B22655H

A †

B min.

C

D P

E

F Bolts

H

L

M

P P

U P

W X

max.

1⁷⁄₈ 47.62 2¹⁄₄ 57.15 2¹⁄₂ 63.50 2³⁄₄ 69.85

4³⁄₄ 120.6 6¹⁄₁₆ 154.0 6⁹⁄₁₆ 166.7 6¹⁵⁄₁₆ 176.2

6 152.4 7¹⁄₄ 184.2 8 203.2 8³⁄₄ 222.2

7³⁄₈ 187.3 8⁷⁄₈ 225.4 9⁵⁄₈ 244.5 10¹⁄₂ 266.7

2.708 68.78 3.075 78.10 3.159 80.24 3.362 85.39

2¹⁄₄ 57.2 2¹⁄₂ 63.5 2⁹⁄₁₆ 65.1 2¹¹⁄₁₆ 68.3

¹⁄₂ 12 ⁵⁄₈ 16 ⁵⁄₈ 16 ⁵⁄₈ 16

1¹⁄₈ 28.6 1⁵⁄₁₆ 33.3 1¹⁄₂ 38.1 1⁵⁄₈ 41.3

3⁷⁄₈ 98.4 4⁹⁄₁₆ 115.9 5 127.0 5¹⁄₂ 139.7

2¹⁄₄ 57.2 2³¹⁄₃₂ 75.4 3⁵⁄₃₂ 80.2 3⁵⁄₈ 92.1

⁹⁄₁₆ 14.3 ⁴³⁄₆₄ 17.1 ²¹⁄₃₂ 16.7 ⁴³⁄₆₄ 17.1

1⁴³⁄₆₄ 42.5 1⁵⁵⁄₆₄ 47.2 1⁹⁄₃₂ 30.7 2³⁄₆₄ 52.0

2³⁄₁₆ 55.6 2⁹⁄₃₂ 57.9 2⁷⁄₁₆ 61.9 2⁹⁄₁₆ 65.1

3¹⁄₈

7¹³⁄₁₆

9³⁄₄

11¹³⁄₁₆

3.863

3³⁄₁₆

³⁄₄

1⁷⁄₈

6⁵⁄₁₆

4⁵⁄₃₂

³⁄₄

2¹⁹⁄₆₄

2²⁵⁄₃₂

79.38

198.4

247.6

300.0

98.12

81.0

20

47.6

160.3 105.6 19.1

58.3

70.6

3³⁄₄ 95.25

9⁵⁄₁₆ 236.5

11⁵⁄₁₆ 287.3

13¹³⁄₁₆ 350.8

4.306 109.37

3¹⁄₂ 88.9

⁷⁄₈ 24

2¹⁄₄ 57.2

7¹⁄₂ 4¹⁵⁄₁₆ ⁷⁄₈ 190.5 125.4 22.2

2⁹⁄₁₆ 65.1

3 76.2

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-66, D-67. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. † Tolerance, ±.005" (±0.13 mm). g LHD Sliding Base Takeup can be drilled for P-B22600H pillow blocks, see page D-22. P Dimensions based on unmounted condition. X Width dimension for closed end unit. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-51

Unit wt. (lbs./kg.) 8 3.1 12 5.5 15 6.8 17 7.7 29 27 13.3 12.2 43 19.5


Max MountTM EP-B22600FH, EPE-B22600FH Cast Iron Housing 4-Bolt Base Fixed or Expansion Self-aligning Adapter Mounted Factory Adjusted and Sealed Self-Aligning Type E Interchange

Fixed

Expansion


Pillow block number

Fixed

Expansion

2⁷⁄₁₆

EP-B22639FH

EPE-B22639FH

2¹¹⁄₁₆ 2¹⁵⁄₁₆



3⁷⁄₁₆

EP-B22655FH

EPE-B22655FH

3¹⁵⁄₁₆

P-B22663FH

PE-B22663FH

4⁷⁄₁₆

P-B22671FH

PE-B22671FH

4¹⁵⁄₁₆

P-B22679FH

PE-B22679FH

A †

min.

B max.

C

2³⁄₄ 69.85

6¹⁵⁄₁₆ 176.2

8³⁄₄ 222.2

3¹⁄₈

7¹³⁄₁₆

9⁷⁄₈

79.38 3³⁄₄ 95.25 4¹⁄₄ 107.95 4³⁄₄ 120.65 5¹⁄₂ 139.70

E

F Bolts

G

10¹⁄₂ 3.362 266.7 85.39

3⁵⁄₈ 92.1

⁵⁄₈ 16

1⁷⁄₈ 47.6

1⁵⁄₈ 5¹⁄₂ 3⁵⁄₈ 41.3 139.7 92.1

⁴³⁄₆₄ 17.1

2³⁄₆₄ 2⁹⁄₁₆ 52.0 65.1

11¹³⁄₁₆ 3.863

4¹⁄₄

⁵⁄₈

2¹⁄₈

1⁷⁄₈

³⁄₄

2¹⁹⁄₆₄ 2²⁵⁄₃₂

198.4 250.8 300.0 98.12

108.0

16

54.0 47.6

160.3 105.6

19.1

58.3 70.6

9⁵⁄₁₆ 236.5 11⁷⁄₈ 301.6 12³⁄₄ 323.8 14⁵⁄₁₆ 363.5

4³⁄₄ 120.6 4¹⁄₂ 114.3 4³⁄₄ 120.6 5³⁄₈ 136.5

³⁄₄ 20 ³⁄₄ 20 ³⁄₄ 20 ⁷⁄₈ 24

2³⁄₈ 60.3 2¹⁄₄ 57.2 2¹⁄₂ 63.5 2³⁄₄ 69.8

7¹⁄₂ 190.5 8¹⁄₂ 215.9 9³⁄₈ 238.1 10⁷⁄₈ 276.2

⁷⁄₈ 22.2 ¹⁵⁄₁₆ 23.8 1³⁄₃₂ 27.8 1³⁄₁₆ 30.2

2⁹⁄₁₆ 65.1 2¹⁵⁄₁₆ 74.6 3¹¹⁄₃₂ 84.9 3²¹⁄₃₂ 92.9

11⁵⁄₁₆ 290.5 13 330.2 14¹⁄₈ 358.8 16¹⁄₈ 409.6

13¹³⁄₁₆ 350.8 15¹⁄₄ 387.4 16¹⁄₂ 419.1 18¹⁄₂ 469.9

D P

4.306 109.37 4.944 125.58 5.534 140.56 6.056 153.82

H

2¹⁄₄ 57.2 2⁵⁄₈ 66.7 2³⁄₄ 69.8 3 76.2

L

6⁵⁄₁₆

M

4⁵⁄₃₂

4¹⁵⁄₁₆ 125.4 5⁷⁄₁₆ 138.1 6¹⁄₈ 155.6 6³⁄₄ 171.4

P P

U P

W X

3 76.2 3⁷⁄₁₆ 87.3 3³⁄₄ 95.2 4 101.6

Unit wt. (lbs./kg.) 20 9.1 31 29 14.0 13.1 46 20.9 67 30.4 88 39.5 128 58.1

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-66 through D-67. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. † Tolerance, ±.005" (±0.13 mm). P Dimensions based on unmounted condition. X Width dimension for closed end unit. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-52


Max Mount™ PK-B22600H, PKE-B22600H Cast Steel Housing 2-Bolt Base Fixed or Expansion Self-aligning Adapter Mounted Factory Adjusted and Sealed Fixed

Expansion


Pillow block numberg Fixed

Expansion

1⁷⁄₁₆

PK-B22623H

PKE-B22623H

1¹⁵⁄₁₆

PK-B22631H

PKE-B22631H

2³⁄₁₆

PK-B22635H

PKE-B22635H

2⁷⁄₁₆

PK-B22639H

PKE-B22639H

A †

B

1⁷⁄₈ 47.62 2¹⁄₄ 57.15 2¹⁄₂ 63.50 2³⁄₄ 69.85

5 127.0 6¹⁄₄ 158.8 6³⁄₄ 171.4 7¹⁄₈ 181.0

C 6⁷⁄₈ 174.6 8³⁄₈ 212.7 8⁷⁄₈ 225.4 9¹⁄₄ 235.0

E

2.708 68.78 3.075 78.10 3.159 80.24 3.362 85.39

2¹⁄₄ 57.2 2¹⁄₂ 63.5 2⁹⁄₁₆ 65.1 2¹¹⁄₁₆ 68.3

F Bolts

H

¹⁄₂ 12 ⁵⁄₈ 16 ⁵⁄₈ 16 ⁵⁄₈ 16

1³⁄₁₆ 30.2 1³⁄₈ 34.9 1⁵⁄₈ 41.3 1³⁄₄ 44.4

L

3¹¹⁄₁₆ 93.7 4⁹⁄₁₆ 115.9 5 127.0 5¹⁄₂ 139.7

3⁷⁄₈ 98.4 4⁹⁄₁₆ 115.9 5 127.0 5¹⁄₂ 139.7

PK-B22643H

PKE-B22643H

3¹⁄₄

8¹⁄₈

3.863

3³⁄₁₆

³⁄₄

2¹⁄₄

6⁷⁄₁₆

6⁷⁄₁₆

2¹⁵⁄₁₆

PK-B22647H

PKE-B22647H

82.55

206.4 265.1 98.12

81.0

20

57.2

163.5

3⁷⁄₁₆

PK-B22655H

PKE-B22655H

3³⁄₄ 95.25 4¹⁄₄ 107.95

10 254.0 11³⁄₄ 298.4

3⁷⁄₁₆ 87.3 4 101.6

⁷⁄₈ 24 1 24

2¹⁄₄ 57.2 2⁵⁄₈ 66.7

7¹⁄₂ 190.5 8¹⁄₂ 215.9

PK-B22663H

PKE-B22663H

13 330.2 15¹⁄₄ 387.4

4.306 109.37 4.944 125.58

P P

S

U P

W X

2¹⁄₄ 57.2 2³¹⁄₃₂ 75.4 3⁵⁄₃₂ 80.2 3⁵⁄₈ 92.1

⁹⁄₁₆ 14.3 ⁴³⁄₆₄ 17.1 ²1⁄₃₂ 16.7 ⁴³⁄₆₄ 17.1

¹³⁄₁₆ 20.6 ¹⁵⁄₁₆ 23.8 ¹⁵⁄₁₆ 23.8 ¹⁵⁄₁₆ 23.8

1⁴³⁄₆₄ 42.5 1⁵⁵⁄₆₄ 47.2 1⁹⁄₃₂ 30.7 2³⁄₆₄ 52.0

2³⁄₁₆ 55.6 2⁹⁄₃₂ 57.9 2⁷⁄₁₆ 61.9 2⁹⁄₁₆ 65.1

1¹⁄₁₆

2¹⁹⁄₆₄

2²⁵⁄₃₂

163.5 105.6 19.1

27.0

58.3

70.6

7¹⁄₂ 190.5 8¹⁄₂ 215.9

1⁵⁄₈ 41.3 2¹⁄₄ 57.2

2⁹⁄₁₆ 65.1 2¹⁵⁄₁₆ 74.6

3 76.2 3⁷⁄₁₆ 87.3

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-66, D-67. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. † Tolerance, ±.005" (±0.13 mm). * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. g LHD Sliding Base Takeup can be drilled for PK-B22600H pillow blocks, see page D-22. P Dimensions based on unmounted condition. X Width dimension for closed end unit. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-53

M

Fixed Expansion

2¹¹⁄₁₆

3¹⁵⁄₁₆

10⁷⁄₁₆

D P

4⁵⁄₃₂

4¹⁵⁄₁₆ 125.4 5⁷⁄₁₆ 138.1

³⁄₄

⁷⁄₈ 22.2 1⁵⁄₁₆ 23.8

Unit wt. (lbs./kg.) 7 3.2 12 5.4 16 7.3 18 8.2 30 29 13.6 13.2 43 19.5 62 28.1


Max Mount™ PK-B22600FH, PKE-B22600FH Cast Steel Housing 4-Bolt Base Fixed or Expansion Self-aligning Adapter Mounted Factory Adjusted and Sealed

Fixed

Expansion

Dimensions (inches/mm) Shaft dia.

Pillow block number

inches

Fixed

Expansion

1¹⁵⁄₁₆

PK-B22631FH

PKE-B22631FH

2³⁄₁₆

PK-B22635FH

PKE-B22635FH

B

C

D P

2¹⁄₄ 57.15 2¹⁄₂ 63.50 2³⁄₄ 69.85

6¹⁄₄ 158.8 6³⁄₄ 171.4 7¹⁄₈ 181.0

8³⁄₈ 212.7 8⁷⁄₈ 225.4 9¹⁄₄ 235.0

3.075 78.10 3.159 80.24 3.362 85.39

10⁷⁄₁₆

3.863

A †

F Bolts

G

H

3³⁄₁₆ 81.0 3¹⁄₄ 82.6 3³⁄₈ 85.7

¹⁄₂ 12 ¹⁄₂ 12 ¹⁄₂ 12

1¹⁹⁄₃₂ 40.5 1¹¹⁄₁₆ 42.9 1³⁄₄ 44.4

1³⁄₈ 34.9 1⁵⁄₈ 41.3 1³⁄₄ 44.4

3³⁄₄

⁵⁄₈

1⁷⁄₈

E

P P

S

U P

4⁹⁄₁₆ 2³¹⁄₃₂ 115.9 75.4 5 3⁵⁄₃₂ 127.0 80.2 5¹⁄₂ 3⁵⁄₈ 139.7 92.1

⁴³⁄₆₄ 17.1 ²¹⁄₃₂ 16.7 ⁴³⁄₆₄ 17.1

¹³⁄₁₆ 20.6 ¹³⁄₁₆ 20.6 ¹³⁄₁₆ 20.6

1⁵⁵⁄₆₄ 47.2 1⁹⁄₃₂ 30.7 2³⁄₆₄ 52.0

2⁹⁄₃₂ 57.9 2⁷⁄₁₆ 61.9 2⁹⁄₁₆ 65.1

16

2¹⁄₄

6⁷⁄₁₆

4⁵⁄₃₂

³⁄₄

¹⁵⁄₁₆

2¹⁹⁄₆₄ 2²⁵⁄₃₂

30 29

L

M

W X

2⁷⁄₁₆

PK-B22639FH

PKE-B22639FH

2¹¹⁄₁₆

PK-B22643FH

PKE-B22643FH

3¹⁄₄

8¹⁄₈

2¹⁵⁄₁₆

PK-B22647FH

PKE-B22647FH

82.55

206.4 265.1 98.12

95.2

16

47.6

57.2

163.5

105.6

19.1

23.8

58.3 70.6

3⁷⁄₁₆

PK-B22655FH

PKE-B22655FH

3¹⁵⁄₁₆

PK-B22663FH

PKE-B22663FH

4⁷⁄₁₆

PK-B22671FH

PKE-B22671FH

4¹⁵⁄₁₆

PK-B22679FH

PKE-B22679FH

3³⁄₄ 95.25 4¹⁄₄ 107.95 4³⁄₄ 120.65 5¹⁄₂ 139.70

10 254.0 12¹⁄₂ 317.5 13¹⁄₂ 342.9 15¹⁄₂ 393.7

4¹⁄₈ 104.8 4¹⁄₂ 114.3 4³⁄₄ 120.6 5³⁄₈ 136.5

³⁄₄ 20 ³⁄₄ 20 ³⁄₄ 20 ⁷⁄₈ 24

2 50.8 2¹⁄₄ 57.2 2¹⁄₂ 63.5 2³⁄₄ 69.8

2¹⁄₄ 57.2 2⁵⁄₈ 66.7 2³⁄₄ 69.8 3 76.2

7¹⁄₂ 190.5 8¹⁄₂ 215.9 9³⁄₈ 238.1 10⁷⁄₈ 276.2

4¹⁵⁄₁₆ 125.4 5⁷⁄₁₆ 138.1 6¹⁄₈ 155.6 6³⁄₄ 171.4

⁷⁄₈ 22.2 ¹⁵⁄₁₆ 23.8 1³⁄₃₂ 27.8 1³⁄₁₆ 30.2

1¹⁄₂ 38.1 1¹⁄₄ 31.8 1³⁄₈ 34.9 1¹⁄₂ 38.1

2⁹⁄₁₆ 65.1 2¹⁵⁄₁₆ 74.6 3¹¹⁄₃₂ 84.9 3²¹⁄₃₂ 92.9

13 330.2 15¹⁄₄ 387.4 16¹⁄₂ 419.1 18¹⁄₂ 469.9

4.306 109.37 4.944 125.58 5.534 140.56 6.056 153.82

Unit wt. (lbs./kg.) 13 5.9 7.3 20 9.3

13.6 13.2 3 47 76.2 21.3 3⁷⁄₁₆ 74 87.3 33.5 3³⁄₄ 93 95.2 42.2 4 124 101.6 56.2

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-66 through D-67. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. † Tolerance, ±.005" (±0.13 mm). * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. P Dimensions based on unmounted condition. X Width dimension for closed end unit. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-54


Max Mount™ CSE-B22600H Steel Housing Fixed or Expansion Self-aligning Adapter Mounted Factory Adjusted and Sealed

FixedG Location G

Expansion Location G

Dimensions (inches/mm) Cartridge unit number G

A †

B

D P

L

M

inches

P P

U P

1⁷⁄₁₆

CSE-B22623H

3.124 79.35

2³⁄₁₆ 55.56

2.708 68.78

2³⁄₄ 69.9

2¹⁄₄ 57.2

⁹⁄₁₆ 14.3

1⁴³⁄₆₄ 42.5

4

CSE-B22631H

3.833 97.36

2²⁵⁄₆₄ 60.72

3.075 78.10

3¹⁄₁₆ 77.8

2³¹⁄₃₂ 75.4

⁴³⁄₆₄ 17.1

1⁵⁵⁄₆₄ 47.2

5

2³⁄₁₆

CSE-B22635H

4.227 107.36

2¹⁄₂ 63.50

3.159 80.24

3⁵⁄₃₂ 80.2

3⁵⁄₃₂ 80.2

²¹⁄₃₂ 16.7

1⁹⁄₃₂ 30.7

7

2⁷⁄₁₆

CSE-B22639H

4.621 117.37

2⁵⁄₈ 66.68

3.362 85.39

3¹⁹⁄₆₄ 83.7

3⁵⁄₈ 92.1

⁴³⁄₆₄ 17.1

2³⁄₆₄ 52.0

8 14 13

Shaft dia.

1¹⁵⁄₁₆

Unit wt. (lbs./kg.) 1.8 2.3 3.2 3.6

2¹¹⁄₁₆

CSE-B22643H

5.407

3¹⁄₈

3.863

3⁷⁄₈

4⁵⁄₃₂

³⁄₄

2¹⁹⁄₆₄

2¹⁵⁄₁₆

CSE-B22647H

137.34

79.38

98.12

98.4

105.6

19.1

58.3

3⁷⁄₁₆

CSE-B22655H

6.194 157.33

3⁷⁄₁₆ 87.31

4.306 109.37

4⁵⁄₁₆ 109.5

4¹⁵⁄₁₆ 125.4

⁷⁄₈ 22.2

2⁹⁄₁₆ 65.1

18

3¹⁵⁄₁₆

CSE-B22663H

7.375 187.32

4 101.60

4.944 125.58

4¹⁵⁄₁₆ 125.4

5⁷⁄₁₆ 138.1

¹⁵⁄₁₆ 23.8

2¹⁵⁄₁₆ 74.6

31

CSE-B22671H

7.769 197.33

4⁹⁄₁₆ 115.89

5.534 140.56

5²¹⁄₃₂ 143.7

6¹⁄₈ 155.6

1³⁄₃₂ 27.8

3¹¹⁄₃₂ 84.9

51

CSE-B22679H

8.753 222.33

4⁷⁄₈ 123.82

6.056 153.82

6¹⁄₁₆ 154.0

6³⁄₄ 171.4

1³⁄₁₆ 30.2

3²¹⁄₃₂ 92.9

55

4⁷⁄₁₆ 4¹⁵⁄₁₆

6.4 5.9 8.2 14.1 23.1

Bold face items are normally available from stock; please consult for availability of non-stock items. Steel cartridge units cannot be disassembled. For replacement, use entire new unit. All units available with type E lip seals. † Tolerance, +.000" –.002" (+0.00 mm –0.05 mm); bore tolerance for mounting +.002" –.000" (+0.05 mm –0.00 mm). * Plug diameter .531" (13.49 mm), engagement depth .125" ±.015" (3.18 ±0.38 mm), allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position on expansion units. P Dimensions based on unmounted condition. G Hole for fixed location and slot for expansion location in the same housing. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-55

24.9


Max Mount™ F-B22600H, FE-B22600H Cast Iron Housing 3-bolt or 4-bolt Mounting Fixed or Expansion Self-aligning Adapter Mounted Factory Adjusted and Sealed


4-BOLT SQUARE

4-BOLT ROUND

3-BOLT ROUND

Type of Housing

Shaft dia.

Flanged unit number

inches

Fixed

Expansion†

1⁷⁄₁₆

F-B22623H

FE-B22623H

A Fixed

B Exp

Circle

Square

3⁷⁄₁₆ 87.3

3³⁄₄ 95.2

5 127.00

... ...

4¹⁄₂ 114.3

C G

D P

F H Bolts

J X

L P

M

N

P P

Unit wt. (lbs./kg.)

5⁷⁄₈ 2.708 149.2 68.78

¹⁄₂ 12

⁵⁄₈ 15.9

3⁵⁄₁₆ 84.1

2¹³⁄₁₆ 71.4

2¹⁄₄ 57.2

6¹⁄₄ 158.8

⁹⁄₁₆ 14.3

7

5³⁄₄ 4¹⁄₁₆ 146.05 103.17

6¹¹⁄₁₆ 3.075 169.9 78.10

¹⁄₂ 12

¹¹⁄₁₆ 17.5

3⁹⁄₁₆ 90.5

3¹³⁄₆₄ 81.4

2³¹⁄₃₂ 75.4

7 177.8

⁴³⁄₆₄ 17.1

10

3.2

1¹⁵⁄₁₆

F-B22631H

FE-B22631H

4¹⁄₄ 108.0

2³⁄₁₆

F-B22635H

FE-B22635H

4⁷⁄₈ 123.8

4⁷⁄₈ 123.8

6³⁄₈ 161.92

4¹⁄₂ 114.30

7³⁄₈ 3.159 187.3 80.24

⁵⁄₈ 16

¹¹⁄₁₆ 17.5

3²⁵⁄₃₂ 96.0

3⁹⁄₃₂ 83.3

3⁵⁄₃₂ 80.2

7³⁄₄ 196.8

²¹⁄₃₂ 16.7

14

FE-B22639H

5³⁄₈ 136.5

5³⁄₈ 136.5

6³⁄₄ 171.45

4⁴⁹⁄₆₄ 121.06

7³⁄₄ 3.362 196.8 85.39

⁵⁄₈ 16

³⁄₄ 19.0

3³¹⁄₃₂ 100.8

3²⁷⁄₆₄ 86.9

3⁵⁄₈ 92.1

8¹⁄₈ 206.4

⁴³⁄₆₄ 17.1

17

³⁄₄

27 26

2⁷⁄₁₆

F-B22639H

2¹¹⁄₁₆

F-B22643H

FE-B22643H

6¹⁄₄

6¹⁄₄

7⁷⁄₈

5⁹⁄₁₆

9¹⁄₈

2¹⁵⁄₁₆

F-B22647H

FE-B22647H

158.8

158.8

200.02

141.27

231.8 98.12

3⁷⁄₁₆

F-B22655H

FE-B22655H

7³⁄₈ 187.3

7³⁄₈ 187.3

9¹⁄₂ 241.30

FE-B22663H

8¹⁄₈ 206.4

8³⁄₈ 212.7

10³⁄₄ 273.05

3¹⁵⁄₁₆

F-B22663H

6.5 7.9

³⁄₄

⁷⁄₈

4⁷⁄₁₆

4

4⁵⁄₃₂

20

22.2

112.7

101.6

105.6 241.3

19.1

6²³⁄₃₂ 170.64

8⁵⁄₈ 4.306 ³⁄₄ 219.1 109.37 20

1³⁄₈ 34.9

4²⁹⁄₃₂ 124.6

4¹⁄₂ 114.3

4¹⁵⁄₁₆ 11⁷⁄₁₆ 125.4 290.5

⁷⁄₈ 22.2

39

7³⁹⁄₆₄ 193.28

9³⁄₄ 4.944 ⁷⁄₈ 247.6 125.58 24

1¹⁄₂ 38.1

5⁵⁄₈ 142.9

5¹⁄₈ 130.2

5⁷⁄₁₆ 12²⁹⁄₃₂ 138.1 327.8

¹⁵⁄₁₆ 23.8

57

3.863

9¹⁄₂

4.5

12.2 11.8 17.7 25.9

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-66, D-67. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. † For expansion units, dimensions G, L, and P are minimum values. For maximum values, add .375" (9.5 mm). P Dimensions based on unmounted condition. G Cross flat dimension for 3³⁄₁₆" and larger shaft. X Width dimension for closed end unit. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-56


Max Mount™ EF-B22600H Cast Iron Housing Padded Flange 4-bolt Mounting Self-aligning Adapter Mounted Factory Adjusted and Sealed



Flanged unit number

A

inches

B Circle

Square

C

D P

F Bolts

H

J X

L P

M

N

P P

Unit wt. (lbs./kg.)

EF-B22623H

3³⁄₄ 95.2

4⁶¹⁄₆₄ 125.81

3¹⁄₂ 88.9

4⁵⁄₈ 117.5

2.708 68.78

¹⁄₂ 12

1¹⁄₄ 31.8

4¹⁄₃₂ 102.4

3⁵⁄₈ 92.1

2¹⁄₄ 57.2

6¹⁄₁₆ 154.0

⁹⁄₁₆ 14.3

8

1¹⁵⁄₁₆

EF-B22631H

4¹⁄₂ 114.3

6³⁄₁₆ 157.18

4³⁄₈ 111.1

5¹⁄₂ 139.7

3.075 78.10

¹⁄₂ 12

1⁷⁄₁₆ 36.5

4⁵⁄₁₆ 109.5

3¹⁵⁄₁₆ 100.0

2³¹⁄₃₂ 75.4

7⁵⁄₁₆ 185.7

⁴³⁄₆₄ 17.1

11

2³⁄₁₆

EF-B22635H

5 127.0

6⁵⁷⁄₆₄ 175.03

4⁷⁄₈ 123.8

6¹⁄₄ 158.8

3.159 80.24

⁵⁄₈ 16

1¹⁄₂ 38.1

4⁵⁄₈ 117.5

4¹⁄₄ 108.0

3⁵⁄₃₂ 80.2

8⁹⁄₃₂ 210.3

²¹⁄₃₂ 16.7

15

EF-B22639H

5³⁄₈ 136.5

7¹⁹⁄₃₂ 192.89

5³⁄₈ 136.5

6³⁄₄ 171.4

3.362 85.39

⁵⁄₈ 16

1¹¹⁄₁₆ 42.9

4¹⁵⁄₁₆ 125.4

4⁹⁄₁₆ 115.9

3⁵⁄₈ 92.1

8³¹⁄₃₂ 227.8

⁴³⁄₆₄ 17.1

17 25 24

1⁷⁄₁₆

2⁷⁄₁₆

3.6 5.0 6.8 7.7

2¹¹⁄₁₆

EF-B22643H

6¹⁄₄

8³¹⁄₆₄

6

7⁵⁄₈

3.863

³⁄₄

1¹³⁄₁₆

5¹³⁄₃₂

5¹⁄₁₆

4⁵⁄₃₂

10¹⁄₈

³⁄₄

2¹⁵⁄₁₆

EF-B22647H

158.8

215.49

152.4

193.7

98.12

20

46.0

137.3

128.6

105.6

257.2

19.1

3⁷⁄₁₆

EF-B22655H

7³⁄₈ 187.3

9⁵⁹⁄₆₄ 251.23

7 177.8

8³⁄₄ 222.2

4.306 109.37

³⁄₄ 20

1¹⁵⁄₁₆ 49.2

5³⁄₄ 146.0

5¹³⁄₃₂ 137.3

4¹⁵⁄₁₆ 125.4

11²¹⁄₃₂ 296.1

⁷⁄₈ 22.2

41

EF-B22663H

8³⁄₈ 212.7

10⁶¹⁄₆₄ 278.21

7³⁄₄ 196.8

9³⁄₄ 247.6

4.944 125.58

⁷⁄₈ 24

2³⁄₁₆ 55.6

6⁵⁄₈ 168.3

6⁷⁄₃₂ 158.0

5⁷⁄₁₆ 138.1

12³¹⁄₃₂ 329.4

¹⁵⁄₁₆ 23.8

56

3¹⁵⁄₁₆

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-66, D-67. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. * Expansion unit allows axial movement of ³⁄₁₆" (4.8 mm) in either direction from centered position shown. P Dimensions based on unmounted condition. X Width dimension for closed end unit. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-57

11.5 11.0 18.6 25.4

Spherical Roller Bearing Flanged Bracket Units

Max Mount™ FB-B22600H High-Test Iron Housing 3-bolt or 4-bolt Mounting Self-aligning Adapter Mounted Factory Adjusted and Sealed


4-BOLT

3-BOLT

Type of Housing

Shaft dia. inches

Flanged bracket unit number

A

B

C

D

E

F Bolts

H

J X

K

L

M

N

U

Unit wt. (lbs./kg.)

FB-B22623H

3⁷⁄₁₆ 87.3

2³⁄₈ 60.3

1¹⁄₄ 2.708 31.8 68.78

3¹⁄₄ 82.6

¹⁄₂ 12

⁵⁄₈ 15.9

3⁵⁄₁₆ 84.1

4¹⁄₄ 108.0

2¹³⁄₁₆ 71.4

2¹⁄₄ 57.2

5³¹⁄₃₂ 2 151.6 50.8

1¹⁵⁄₁₆

FB-B22631H

4¹⁄₄ 108.0

2¹⁵⁄₁₆ 74.6

1⁵⁄₈ 3.075 41.3 78.10

4 101.6

¹⁄₂ 12

¹¹⁄₁₆ 17.5

3⁹⁄₁₆ 90.5

5³⁄₁₆ 131.8

3¹³⁄₆₄ 81.4

2³¹⁄₃₂ 75.4

7⁵⁄₁₆ 2³⁄₄ 185.7 69.8

10.0 4.4

2⁷⁄₁₆

FB-B22639H

5³⁄₈ 136.5

3³⁄₄ 95.2

1³⁄₄ 3.159 44.4 80.24

4⁷⁄₈ 123.8

⁵⁄₈ 16

³⁄₄ 19.0

3³¹⁄₃₂ 100.8

6¹⁄₄ 158.8

3⁹⁄₃₂ 83.3

3⁵⁄₃₂ 80.2

8¹⁵⁄₁₆ 227.0

3 76.2

17.5

30.0 4 28.0 13.7 101.6 12.8

1⁷⁄₁₆

2¹¹⁄₁₆

FB-B22643H

6¹⁄₄

3⁷⁄₈

2¹⁄₄

3.362

5³⁄₄

³⁄₄

⁷⁄₈

4⁷⁄₁₆

7

3²⁷⁄₆₄

3⁵⁄₈

10¹⁄₈

2¹⁵⁄₁₆

FB-B22647H

158.8

98.4

57.2

85.39

146.0

20

22.2

112.7

177.8

86.9

92.1

257.2

6.4 2.9

7.9

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-66, D-67. Lubrication fitting tap size: for 1¹⁄₂ and smaller shafts, ¹⁄₄"-28 UNF; for all other shafts, ¹⁄₈" PT. All units available with type E lip seals. P Dimensions based on unmounted condition. X Width dimension for closed end unit. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-58

Spherical Roller Bearing Flanged Cartridge Units

Max Mount™ FC-B22600H Cast Iron Housing Self-aligning Adapter Mounted Factory Adjusted and Sealed Jack Screws for Removal



B

inches

Flanged cartridge unit number

1⁷⁄₁₆

FC-B22623H

3.625 92.08

4³⁄₈ 111.12

1¹⁵⁄₁₆ 2³⁄₁₆ 2⁷⁄₁₆

C

D

F Bolts

H

J

K

L

3³⁄₃₂ 78.6

5¹⁄₄ 133.4

2.708 68.78

³⁄₈ 10

¹⁄₂ 12.7

1²⁵⁄₆₄ 35.3

2⁷⁄₃₂ 56.4

1³⁄₈ 60.3

FC-B22631H

4.500 5³⁄₈ 114.30 136.52

3⁵¹⁄₆₄ 96.4

6³⁄₈ 161.9

3.075 78.10

⁷⁄₁₆ 10

⁹⁄₁₆ 14.3

1¹⁹|₃₂ 40.5

2¹⁵⁄₃₂ 62.7

FC-B22635H

5.000 127.00

6 152.40

4¹⁄₄ 107.9

7¹⁄₈ 181.0

3.159 80.24

¹⁄₂ 12

⁹⁄₁₆ 14.3

1²¹|₃₂ 42.1

FC-B22639H

5.500 6¹⁄₂ 139.70 165.10

4¹⁹⁄₃₂ 116.7

7⁵⁄₈ 193.7

3.362 85.39

¹⁄₂ 12

⁵⁄₈ 15.9

1¹¹⁄₁₆ 42.9

A †

2¹¹⁄₁₆

FC-B22643H

6.375

2¹⁵⁄₁₆

FC-B22647H

3⁷⁄₁₆

FC-B22655H

7.375 187.32

FC-B22663H

3¹⁵⁄₁₆

Circle

7¹⁄₂

Square

U

Y X

2¹⁄₄ 57.2

⁹⁄₁₆ 14.3

³⁄₄ 19.0

1⁷⁄₈ 47.6

6

1³⁵⁄₆₄ 39.3

2³¹⁄₃₂ 75.4

⁴³⁄₆₄ 17.1

⁷⁄₈ 22.2

1²⁹⁄₃₂ 48.4

9

2¹⁷⁄₃₂ 64.3

1¹⁷⁄₃₂ 38.9

3⁵⁄₃₂ 80.2

²¹⁄₃₂ 16.7

1 25.4

2¹⁄₃₂ 51.6

12

2²¹⁄₃₂ 67.5

1³⁹⁄₆₄ 40.9

3⁵⁄₈ 92.1

⁴³⁄₆₄ 17.1

1 25.4

2⁵⁄₃₂ 54.8

16

1¹⁄₄

2⁵⁄₁₆

25 24

³⁄₄

2.6 4.0 5.4 7.2

5¹⁹⁄₆₄

8³⁄₄

3.863

⁵⁄₈

³⁄₄

2¹⁄₃₂

3⁵⁄₃₂

1⁷⁄₈

4⁵⁄₃₂

161.92 190.50

134.5

222.2

98.12

16

19.0

51.6

80.2

44.4

105.6 19.1

31.8

58.7

8⁵⁄₈ 219.08

6³⁄₃₂ 154.8

10¹⁄₄ 260.4

4.306 109.37

³⁄₄ 20

¹⁵⁄₁₆ 23.8

1¹⁵⁄₁₆ 49.2

3¹³⁄₃₂ 86.5

2²³⁄₆₄ 59.9

4¹⁵⁄₁₆ ⁷⁄₈ 125.4 22.2

1¹⁄₄ 31.8

2²⁵⁄₃₂ 70.6

37

8.125 9³⁄₈ 206.38 238.12

6⁵⁄₈ 168.3

10⁷⁄₈ 276.2

4.944 125.58

³⁄₄ 20

1¹⁄₈ 28.6

2¹³⁄₃₂ 61.1

3³¹⁄₃₂ 101.1

2⁹⁄₁₆ 65.1

5⁷⁄₁₆ ¹⁵⁄₁₆ 138.1 23.8

2 50.8

3¹⁄₁₆ 77.8

50

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-66, D-67. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. † Tolerance, +.000 –.002" (+0.00 mm –0.05 mm); bore tolerance for mounting +.002" –.000" (+0.05 mm –0.00 mm). P Dimensions based on unmounted condition. X Width dimension for closed end unit. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-59

Unit wt. (lbs./kg.)

P

M

11.4 11.0 16.9 22.8

Spherical Roller Bearing Takeup Units

Max Mount™ T-B22600H Cast Iron Housing Machined Slots Self-aligning Adapter Mounted Factory Adjusted Clearance


Takeup unit number

N k

S k

4¹⁄₈ 2¹⁄₄ 104.8 57.2

3.500 88.90

.531 13.49

1¹⁵⁄₁₆ 1¹⁄₈ 5¹⁵⁄₁₆ 2¹⁄₂ 49.2 28.6 150.8 63.5

4³⁄₄ 2³¹⁄₃₂ 120.6 75.4

2¹⁄₄ 57.2

2⁹⁄₁₆ 65.1

4¹⁄₈ 2¹⁄₂ 1³⁄₈ 7¹³⁄₁₆ 2¹¹⁄₁₆ 104.8 63.5 34.9 198.4 68.3

A

C

D P

F

T-B22623H

3¹⁄₂ 88.9

2³⁄₄ 69.8

2.708 68.78

2³⁄₈ 60.3

1⁷⁄₁₆ ⁷⁄₈ 4³⁄₄ 2¹⁄₄ 36.5 22.2 120.6 57.2

1¹⁵⁄₁₆

T-B22631H

4³⁄₈ 3³⁄₈ 111.1 85.7

3.075 78.10

3³⁄₁₆ 81.0

2³⁄₁₆

T-B22635H

5¹⁄₁₆ 3³⁄₄ 128.6 95.2

3.159 80.24

3³⁄₄ 95.2

T-B22639H

5⁹⁄₁₆ 4 3.362 141.3 101.6 85.39

inches 1⁷⁄₁₆

2⁷⁄₁₆ 2¹¹⁄₁₆

T-B22643H

6⁷⁄₁₆

2¹⁵⁄₁₆

T-B22647H

163.5 120.6 98.12

3⁷⁄₁₆

T-B22655H

7³⁄₈ 187.3

T-B22663H

8⁷⁄₈ 7 225.4 177.8

3¹⁵⁄₁₆

4³⁄₄

3.863

4³⁄₄

G

2³⁄₄

H

J

1¹⁄₄ 7 31.8 177.8

1⁵⁄₈

8¹⁵⁄₁₆

120.6 69.8 41.3 227.0

5¹⁄₂ 4.306 4⁷⁄₈ 2⁷⁄₈ 139.7 109.37 123.8 73.0 4.944 5¹⁄₄ 3¹⁄₈ 125.58 133.4 79.4

K

L

M

T

U P

W X

Y

Unit wt. (lbs./kg.)

⁵⁄₈ 1⁴³⁄₆₄ 2³⁄₁₆ 3 15.9 42.5 55.6 76.2

6.4

4.000 .687 101.60 17.46

³⁄₄ 1⁵⁵⁄₆₄ 2⁹⁄₃₂ 19.0 47.2 57.9

9.7

5¹⁄₄ 3⁵⁄₃₂ 133.4 80.2

4.500 .813 114.30 20.64

1 1⁹⁄₃₂ 2⁷⁄₁₆ 4¹⁵⁄₃₂ 25.4 30.7 61.9 113.5

14.1

5⁷⁄₈ 3⁵⁄₈ 149.2 92.1

5.125 1.063 130.18 26.99

1¹⁄₄ 31.8

17.8

3³⁄₁₆

6¹¹⁄₁₆

81.0

4⁵⁄₃₂

2³⁄₆₄ 52.0

3³⁄₄ 95.2

2⁹⁄₁₆ 5¹⁄₃₂ 65.1 127.8

1¹⁄₄

2¹⁹⁄₆₄ 2²⁵⁄₃₂ 5²³⁄₃₂

169.9 105.6 150.81 46.02

31.8

58.3 70.6 145.2

7¹³⁄₁₆ 4¹⁵⁄₁₆ 6.812 198.4 125.4 173.02

1⁹⁄₁₆ 2⁹⁄₁₆ 3 6⁵⁄₁₆ 39.7 65.1 76.2 160.3

5.937

1.812

1⁷⁄₈ 47.6

10 3⁷⁄₁₆ 254.0 87.3

1⁷⁄₈ 47.6

11⁷⁄₈ 4 9⁵⁄₈ 5⁷⁄₁₆ 8.625 2.062 301.6 101.6 244.5 138.1 219.08 52.37

1.812 46.02

1⁵⁄₈ 41.3

2¹⁵⁄₁₆ 3⁷⁄₁₆ 74.6 87.3

7⁷⁄₁₆ 188.9

2.9 4.4 6.4 8.3 13.5 13.0 6.1 5.9 43.1 19.6 76 34.5

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing numbers, see pages D-67, D-68. Lubrication fitting tap size, ¹⁄₈" PT. All units available with type E lip seals. j Slots are machined, tolerance, +.005" –.015" (+0.13 mm –0.38 mm). P Dimensions based on unmounted condition. X Width dimension for closed end unit. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-60


Max Mount™ B22600HL Self-aligning Adapter Mounted

Dimensions (inches/mm) E Shoulder diameter

H P

M P

N

R Housing fillet

T

Y

1.310 33.27

2¹⁄₂ 63.5

2.708 68.78

2¹⁄₄ 57.2

1.745 44.32

.062 1.57

¹⁄₂ 12.7

1³⁄₃₂ 27.78

2.1

B22631HL

3.5433 90.000

1.526 38.76

3³⁄₁₆ 81.0

3.075 78.10

2³¹⁄₃₂ 75.4

2.307 58.59

.078 1.98

⁹⁄₁₆ 14.3

1⁷⁄₃₂ 30.96

3.3

B22635HL

3.9370 100.000

1.656 42.06

3¹⁄₂ 88.9

3.159 80.24

3⁵⁄₃₂ 80.2

2.620 66.55

.062 1.57

¹⁹⁄₃₂ 15.1

1¹⁄₄ 31.75

4.5

B22639HL

4.3307 110.000

1.750 44.45

3⁷⁄₈ 98.4

3.362 85.39

3⁵⁄₈ 92.1

2.901 73.69

.078 1.98

⁵⁄₈ 15.9

1⁵⁄₁₆ 33.34

5.9


B22623HL

1¹⁵⁄₁₆ 2³⁄₁₆ 2⁷⁄₁₆

B +.0010" –.000" +0.025 mm –0.000mm 2.8345 71.996

C ±.025" ± 0.64 mm ‡

Bearing number *

Shaft Sizes

Unit wt. (lbs./kg.)

1.0 1.5 2.1 2.8 10.1 9.0

2¹¹⁄₁₆

B22643HL

5.1172

2.125

4¹⁷⁄₃₂

3.863

4⁵⁄₃₂

3.370

.078

⁴³⁄₆₄

1⁹⁄₁₆

2¹⁵⁄₁₆

B22647HL

129.977

53.98

115.1

98.12

105.6

85.60

1.98

17.1

39.69

3⁷⁄₁₆

B22655HL

5.9045 149.974

2.313 58.75

5¹¹⁄₃₂ 135.7

4.306 109.37

4¹⁵⁄₁₆ 125.4

3.975 100.97

.125 3.18

⁵¹⁄₆₄ 20.2

1²³⁄₃₂ 43.66

12.8

3¹⁵⁄₁₆

B22663HL

7.0856 179.974

2.750 69.85

6³⁄₈ 161.9

4.944 125.58

5⁷⁄₁₆ 138.1

4.561 115.85

.125 3.18

⁵⁵⁄₆₄ 21.8

2 50.80

23.2 10.5

4⁷⁄₁₆

B22671HL

7.4792 189.972

2.974 75.54

6⁵⁄₈ 168.3

5.534 140.56

6¹⁄₈ 155.6

5.000 127.00

.125 3.18

⁶¹⁄₆₄ 24.2

3³⁄₈ 85.72

36.0 16.3

4¹⁵⁄₁₆

B22679HL

8.4634 214.970

3.437 87.30

7¹⁄₂ 190.5

6.056 153.82

6³⁄₄ 171.4

5.594 142.08

.125 3.18

1¹⁄₆₄ 25.8

3⁵⁄₈ 92.08

40.7 18.9

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearings for expansion units use complete CSE-B22600H per page D-55. * Includes bearing, two floating labyrinth seals and one adapter assembly. P Dimensions based on unmounted condition. All bearings available with type E lip seals. Selection guide, pages D-45, D-46. Load ratings, pages D-47, D-48. Additional information, page D-69.

D-61

4.6 4.1 5.8

‡ Use shims, threaded cover, or spacer ring to provide for adjustment. Housing must allow clearance for this adjustment on dimension C.

Spherical Roller Bearing Unit Replacement Parts

Series B22400 Fixed Type Alternate Seal

Optional End Closure

Type E

Seal Bearing

Housing

Seal Threaded Cover

1

B22416 B224M25

B22416HL B224M25HL

Components in repair kit Type H Spherical multi-disc Collar roller labyrinth seals with bearing (2 reqd.)K setscrews B22416 B22417-3H B22416-5S B224M25

1³⁄₁₆ 1¹⁄₄

B22419 B22420 B224M30

B22419HL B22420HL B224M30HL

B22419 B22420 B224M30

B22420-3H

B22420-5S

B22420-7

B22420-7C

B22420-6

P-B22420-0

1⁷⁄₁₆ 1¹⁄₂

B22423 B22424 B224M35

B22423HL B22424HL B224M35HL

B22423 B22424 B224M35

B22424-3H

B22424-5S

B22424-7

B22424-7C

B22424-6

P-B22424-0

1¹⁄₂ 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

B224B24 B22426 B22427 B22428 B224M40

B224B24HL B22426HL B22427HL B22428HL B224M40HL

B224B24 B22426 B22427 B22428 B224M40

B22428-3H

B22524-5S B22428-5S B22428-5S B22428-5S B22428-5S

B22428-7

B22428-7C

B22428-6

P-B22428-0

1³⁄₄ 1¹⁵⁄₁₆ 2

B224B28 B22431 B22432 B224M45 B224M50

B224B28HL B22431HL B22432HL B224M45HL B224M50HL

B224B28 B22431 B22432 B224M45 B224M50

B22432-3H

B22528-5S B22432-5S B22432-5S B22432-5S B22432-5S

B22432-7

B22432-7C

B22432-6

P-B22432-0

2³⁄₁₆ 2¹⁄₄

B22435 B22436 B224M55

B22435HL B22436HL B224M55HL

B22435 B22436 B224M55

B22436-3H

B22435-5S B22436-5S B22436-5S

B22436-7

B22436-7C

B22436-6

P-B22436-0

2¹⁄₄ 2⁷⁄₁₆ 2¹⁄₂

B224B36 B22439 B22440 B224M60

B224B36HL B22439HL B22440HL B224M60HL

B224B36 B22439 B22440 B224M60

B22440-3H

B22536-5S B22440-5S B22440-5S B22440-5S

B22440-7

B22440-7C

B22440-6

P-B22440-0

2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3

B22443 B22444 B22447 B22448 B224M65 B224M70 B224M75

B22443HL B22444HL B22447HL B22448HL B224M65HL B224M70HL B224M75HL

B22443 B22444 B22447 B22448 B224M65 B224M70 B224M75

B22448-3H

B22443-5S B22448-5S B22448-5S B22448-5S B22443-5S B22448-5S B22448-5S

B22448-7

B22448-7C

B22448-6

P-B22448-0

3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂

B22451 B22455 B22456 B224M80 B224M85


B22451 B22455 B22456 B224M80 B224M85

B22456-3H

B22551-5S B22456-5S B22456-5S B22551-5S B22456-5S

B22456-7

B22456-7C

B22456-6

P-B22456-0

3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4

B22459 B22463 B22464 B224M90 B224M100


B22459 B22463 B22464 B224M90 B224M100

B22464-3H

B22464-5S

B22464-7

B22464-7C

B22464-6

P-B22464-0

Shaft diameter mm inches

25

30

35

40

45 50

55

60

65 70 75

80 85

90 100

Collar

Basic Bearing Designation G

Repair kit K

Threaded cover for open end

Threaded cover for closed end

End closure *

Housing number G

B22417-7

B22417-7C

B22417-6

P-B22417-0

G For variations in type and material, use prefix: P-B22432 -0 For construction features, use suffix: T — takeup unit FB — flanged bracket unit P — pillow block, cast iron F — 4-bolt base pillow block EFR — padded flanged unit FC — flanged cartridge unit PK — pillow block, cast steel (on 1¹⁵⁄₁₆" and larger shafts only) EP — pillow block, cast iron C — cartridge unit, cast iron PL — pillow block, low backing * Closed end units are assembled with two seals. F — flanged unit DS — takeup unit L Floating labyrinth seals, suffix H, are furnished with B22400HL repair kits. For spring-loaded lip type seals specify B22400EL.

D-62


Series B22400 Expansion Type

Alternate seal

Lock plug

Type E

Housing

Shaft diameter mm

inches

Basic Bearing Designation

Repair kit K

Components in repair kit Type HK Collar multi-disc with labyrinth seals setscrews (2 reqd.)

Locking plug number For For pillow flanged block unit

Collar

Housing number G

1

PE-B22416H PE-B224M25H

B22416 B224M25

CSE-B22416H CSE-B224M25H

B22417-3H

B22416-5S

B22440-8A

B22440-8A

PE-B22417-OE

1³⁄₁₆ 1¹⁄₄

PE-B22419H PE-B22420H PE-B224M30H

B22419 B22420 B224M30


B22420-3H

B22420-5S

B22440-8A

B22440-8A

PE-B22420-OE

1⁷⁄₁₆ 1¹⁄₂

PE-B22423H PE-B22424H PE-B224M35H

B22423 B22424 B224M35


B22424-3H

B22424-5S

B22440-8A

B22440-8A

PE-B22424-OE

1¹⁄₂ 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

PE-B224B24H PE-B22426H PE-B22427H PE-B22428H PE-B224M40H

B224B24 B22426 B22427 B22428 B224M40

CSE-B224B24H CSE-B22426H CSE-B22427H CSE-B22428H CSE-B224M40H

B22428-3H

B22524-5S B22428-5S B22428-5S B22428-5S B22428-5S

B22440-8A

B22440-8A

PE-B22428-OE

1³⁄₄ 1¹⁵⁄₁₆ 2

PE-B224B28H PE-B22431H PE-B22432H PE-B224M45H PE-B224M50H

B224B28 B22431 B22432 B224M45 B224M50

CSE-B224B28H CSE-B22431H CSE-B22432H CSE-B224M45H CSE-B224M50H

B22432-3H

B22528-5S B22432-5S B22432-5S B22432-5S B22432-5S

B22440-8A

B22440-8A

PE-B22432-OE

2³⁄₁₆ 2¹⁄₄

PE-B22435H PE-B22436H PE-B224M55H

B22435 B22436 B224M55


B22436-3H

B22435-5S B22436-5S B22436-5S

B22440-8A

B22440-8A

PE-B22436-OE

2¹⁄₄ 2⁷⁄₁₆ 2¹⁄₂

PE-B224B36H PE-B22439H PE-B22440H PE-B224M60H

B224B36 B22439 B22440 B224M60

CSE-B224B36H CSE-B22439H CSE-B22440H CSE-B224M60H

B22440-3H

B22536-5S B22440-5S B22440-5S B22440-5S

B22440-8A

B22440-8A

PE-B22440-OE

2¹¹⁄₁₆ 2³⁄₄ 2¹⁵⁄₁₆ 3

PE-B22443H PE-B22444H PE-B22447H PE-B22448H PE-B224M65H PE-B224M70H PE-B224M75H

B22443 B22444 B22447 B22448 B224M65 B224M70 B224M75

CSE-B22443H CSE-B22444H CSE-B22447H CSE-B22448H CSE-B224M65H CSE-B224M70H CSE-B224M75H

B22448-3H

B22443-5S B22448-5S B22448-5S B22448-5S B22443-5S B22448-5S B22448-5S

B22448-8A

B22448-8A

PE-B22448-OE

3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂


B22451 B22455 B22456 B224M80 B224M85


B22456-3H

B22551-5S B22456-5S B22456-5S B22551-5S B22456-5S

B22572-8A

B22572-8A

PE-B22456-OE

3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4


B22459 B22463 B22464 B224M90 B224M100

CSE-B22459 CSE-B22463 CSE-B22464 CSE-B224M90H CSE-B224M100H

B22464-3H

B22464-5S

B22448-8A

B22572-8A

PE-B22464-OE

25

30

35

40

45 50

55

60

65 70 75

80 85

90 100

Pillow block number G

Cartridge unit

G For variations in type and material, use prefix: PE-B22432 -0 For construction features, use suffix: FE — flanged unit PE — pillow block, cast iron F — 4-bolt base pillow block EPE — pillow block, cast iron PKE — pillow block, cast steel (on 1¹⁵⁄₁₆" and larger shafts only) L Floating labyrinth seals, suffix H, are furnished with CSE-B22400H repair kits. For spring-loaded lip type seals specify CSE-B22400E.

D-63


Series B22500 Fixed Type Alternate seal


Type E

Collar

Seal Bearing Housing Seal Threaded Cover

Collar

Components in repair kit Shaft diameter

Collar with setscrews (2 included)



End closure

Housing number G

B22523

Type H multi-disc labyrinth seals (2 reqd.)K B22424-3H

B22424-5S

B22424-7

B22424-7C

B22424-6

P-B22523-0

B22527

B22428-3H

B22428-5S

B22428-7

B22428-7C

B22428-6

P-B22527-0

B22531HL

B22531

B22432-3H

B22432-5S

B22432-7

B22432-7C

B22432-6

P-B22531-0

B22532 B22535

B22532HL B22535HL

B22532 B22535

B22436-3H

B22435-5S

B22436-7

B22436-7C

B22436-6

P-B22535-0

2⁷⁄₁₆

B22539

B22539HL

B22539

B22440-3H

B22440-5S

B22440-7

B22440-7C

B22440-6

P-B22539-0

2¹¹⁄₁₆ 2¹⁵⁄₁₆

B22543 B22547

B22543HL B22547HL

B22543 B22547

B22448-3H

B22443-5S B22448-5S

B22448-7

B22448-7C

B22448-6

P-B22547-0

3⁷⁄₁₆

B22555

B22555HL

B22555

B22456-3H

B22456-5S

B22456-7

B22456-7C

B22456-6

P-B22556F-0

3¹⁵⁄₁₆ 4

B22563 B22564

B22563HL B22564HL

B22563 B22564

B22464-3H

B22464-5S

B22464-7

B22464-7C

B22464-6

P-B22564F-0

4³⁄₁₆ 4⁷⁄₁₆ 4¹⁄₂

B22567 B22571 B22572 B225M110 B225M115


B22567 B22571 B22572 B225M110 B225M115

B22572-3H

B22571-5S B22571-5S B22572-5S B22571-5S B22572-5S

B22572-7

B22572-7C

B22572-6

P-B22572F-0

4¹⁵⁄₁₆ 5

B22579 B22580 B225M125

B22579HL B22580HL B225M125HL

B22579 B22580 B225M125

B22580-3H

B22580-5S

B22580-7

B22580-7C

B22580-6

P-B22580F-0

1⁷⁄₁₆

Basic Bearing Designation G B22523

B22523HL

1¹¹⁄₁₆

B22527

B22527HL

1¹⁵⁄₁₆

B22531

2 2³⁄₁₆

mm inches

110 115

125

Repair kit K

Spherical roller bearing

G For variations in type and material, use prefix: P-B22531 -0 For construction features, use suffix: P — pillow block, cast iron F — 4-bolt base pillow block PK — pillow block, cast steel (on 1¹⁵⁄₁₆" and larger shafts only) (for 4³⁄₁₆", 110 mm and larger shaft only) DSH — takeup unit L Floating labyrinth seals, suffix H, are furnished with B22500HL repair kits. For spring-loaded lip type seals specify B22500EL. * Closed end units are assembled with two seals.

D-64


Series B22500

Lock plug

Alternate seal

Expansion Type

Collar Type E

Housing

Cartridge unit

Collar

Components in repair kit Shaft diameter mm

inches


Repair kit K

Type H multi-disc labyrinth seals (2 reqd.)K

Collar with setscrews (2 included)

Locking plug number

Housing number G

1⁷⁄₁₆

PE-B22523H

B22523

CSE-B22523H

B22424-3H

B22424-5S

B22440-8A

PE-B22523-OE

1¹¹⁄₁₆

PE-B22527H

B22527

CSE-B22527H

B22428-3H

B22428-5S

B22448-8A

PE-B22527-OE

1¹⁵⁄₁₆

PE-B22531H

B22531

CSE-B22531H

B22432-3H

B22432-5S

B22448-8A

PE-B22531-OE

2 2³⁄₁₆

PE-B22532H PE-B22535H

B22532 B22535


B22436-3H

B22435-5S

B22448-8A

PE-B22535-OE

2⁷⁄₁₆

PE-B22539H

B22539

CSE-B22539H

B22440-3H

B22440-5S

B22448-8A

PE-B22539-OE

2¹¹⁄₁₆ 2¹⁵⁄₁₆

PE-B22543H PE-B22547H

B22543 B22547


B22448-3H

B22443-5S B22448-5S

B22572-8A

PE-B22547-OE

3⁷⁄₁₆

PE-B22555FH

B22555

CSE-B22555H

B22456-3H

B22456-5S

B22580-8A

PE-B22556F-OE

3¹⁵⁄₁₆ 4


B22563 B22564


B22464-3H

B22464-5S

B22572-8A

PE-B22564F-OE

4³⁄₁₆ 4⁷⁄₁₆ 4¹⁄₂

PE-B22567FH PE-B22571FH PE-B22572FH PE-B225M110FH PE-B225M115FH

B22567 B22571 B22572 B225M110 B225M115


B22572-3H

B22571-5S B22571-5S B22572-5S B22571-5S B22572-5S

B22572-8A

PE-B22572F-OE

4¹⁵⁄₁₆ 5

PE-B22579FH PE-B22580FH PE-B225M125FH

B22579 B22580 B225M125


B22580-3H

B22580-5S

B22580-8A

PE-B22580F-OE

110 115

125

Pillow block number

Expansion units cannot be furnished with closed end caps. 4³⁄₁₆", 110 mm and larger shafts are available with cast steel housing, use prefix PKE i.e., PKE-B22567FH. G For pillow block with 4-bolt base, use suffix F (on 1¹⁵⁄₁₆" and larger shafts only). L Floating labyrinth seals, suffix H, are furnished with CSE-B22500H repair kits. For spring-loaded lip type seals specify CSE-B22500E.

D-65


Max Mount™ Series B22600 Fixed Type Adapter

Seal Housing Bearing Seal Threaded LockCover washer Locknut

Components in repair kit Shaft diameter inches

Basic Bearing Designation G

Repair kit K

Spherical roller bearing

Type H multi-disc labyrinth seals (2 reqd.)K

Adapter assembly†



End closure

*

Housing number G

1⁷⁄₁₆

B22623

B22623HL

B22623

B22424-3H

SNW623-1⁷⁄₁₆

B22424-7

B22424-7C

B22424-6

P-B22424-0

1¹⁵⁄₁₆

B22631

B22631HL

B22631

B22432-3H

SNW631-1¹⁵⁄₁₆

B22432-7

B22432-7C

B22432-6

P-B22432-0

2³⁄₁₆

B22635

B22635HL

B22635

B22436-3H

SNW635-2³⁄₁₆

B22436-7

B22436-7C

B22436-6

P-B22436-0

2⁷⁄₁₆

B22639

B22639HL

B22639

B22440-3H

SNW639-2⁷⁄₁₆

B22440-7

B22440-7C

B22440-6

P-B22440-0

2¹¹⁄₁₆ 2¹⁵⁄₁₆

B22643 B22647

B22643HL B22647HL

B22643 B22647

B22448-3H

SNW647-2¹¹⁄₁₆ SNW647-2¹⁵⁄₁₆

B22448-7

B22448-7C

B22448-6

P-B22448-0

3⁷⁄₁₆

B22655

B22655HL

B22655

B22456-3H

SNW655-3⁷⁄₁₆

B22456-7

B22456-7C

B22456-6

P-B22456-0

3¹⁵⁄₁₆

B22663

B22663HL

B22663

B22464-3H

SNW663-3¹⁵⁄₁₆

B22464-7

B22464-7C

B22464-6

P-B22464-0

4⁷⁄₁₆

B22671

B22671HL

B22671

B22572-3H

SNW671-4⁷⁄₁₆

B22572-7

B22572-7C

B22572-6

P-B22572F-0

4¹⁵⁄₁₆

B22679

B22679HL

B22679

B22580-3H

SNW679-4⁷⁄₁₆

B22580-7

B22580-7C

B22580-6

P-B22580F-0

GFor variations in type and material, use prefix: P-B22631 -0 For construction features, use suffix: T — takeup unit FB— flanged bracket unit P— pillow block, cast iron F— 4-bolt base pillow block EF — padded flanged unit FC— flanged cartridge unit PK— pillow block, cast steel (on 1¹⁵⁄₁₆" and larger shafts only) EP — pillow block, cast iron * Closed end units are assembled with two seals. F — flanged unit L Floating labyrinth seals, suffix H, are furnished with B22600HL repair kits. For spring-loaded lip type seals specify B22600EL. † — Adapter assembly consists of adapter, lockwasher and locknut.

D-66


Max Mount™ B22600 Expansion Type

Adapter

Housing Cartridge unit

Lockwasher Locknut

Components in repair kit Shaft diameter

Pillow block number G


Repair kit K

Locking plug number Housing number G

1⁷⁄₁₆

PE-B22623H

B22623

CSE-B22623H

Type HK multi-disc labyrinth seals (2 reqd.) B22424-3H

SNW623-1⁷⁄₁₆

For pillow block B22440-8A

1¹⁵⁄₁₆

PE-B22631H

B22631

CSE-B22631H

B22432-3H

SNW631-1¹⁵⁄₁₆

B22440-8A

B22440-8A

PE-B22432-OE

2³⁄₁₆

PE-B22635H

B22635

CSE-B22635H

B22436-3H

SNW635-2³⁄₁₆

B22440-8A

B22440-8A

PE-B22436-OE

2⁷⁄₁₆

PE-B22639H

B22639

CSE-B22639H

B22440-3H

SNW639-2⁷⁄₁₆

B22440-8A

B22440-8A

PE-B22440-OE

2¹¹⁄₁₆ 2¹⁵⁄₁₆

PE-B22643H PE-B22647H

B22643 B22647


B22448-3H

SNW647-2¹¹⁄₁₆ SNW647-2¹⁵⁄₁₆

B22448-8A

B22448-8A

PE-B22448-OE

3⁷⁄₁₆

PE-B22655H

B22655

CSE-B22655H

B22456-3H

SNW655-3⁷⁄₁₆

B22572-8A

B22572-8A

PE-B22456-OE

3¹⁵⁄₁₆

PE-B22663H

B22663

CSE-B22663H

B22464-3H

SNW663-3¹⁵⁄₁₆

B22448-8A

B22572-8A

PE-B22464-OE

4⁷⁄₁₆

PE-B22671H

B22671

CSE-B22671H

B22572-3H

SNW671-4⁷⁄₁₆

B22572-8A

PE-B22572F-OE

4¹⁵⁄₁₆

PE-B22679H

B22679

CSE-B22679H

B22580-3H

SNW679-4¹⁵⁄₁₆

B22580-8A

PE-B22580F-OE

inches

G

Adapter assembly†

For flanged unit B22440-8A

PE-B22424-OE

For variations in type and material, use prefix: PE-B22631 -0 For construction features, use suffix: FE — flanged unit PE — pillow block, cast iron F — 4-bolt base pillow block EPE — pillow block, cast iron PKE — pillow block, cast steel (on 1¹⁵⁄₁₆" and larger shafts only) L Floating labyrinth seals, suffix H, are furnished with CSE-B22600H repair kits. For spring-loaded lip type seals specify CSE-B22600E. † — Adapter assembly consists of adapter, lockwasher and locknut.

D-67


Series B22400 and B22500 Housing End Closures:

Replacement Parts:

All fixed type B22400 and B22500 mounted units can be purchased with formed steel closed end caps on the collar side which covers all rotating elements. Two housing seals are provided to protect the bearing during mounting or in case of accidental cap removal. Closed end units have a special extended threaded cover for mounting the end cap. They are designated with the suffix HHC or EEC (i.e., P-B22431HHC). Shafting should not extend beyond the end of the bearing inner ring more than ¹⁄₈" (3.2 mm) when end caps are to be used.

Bearings and seals can be replaced in Series B22400 and B22500 mounted units (except CSE units). Replacement parts are listed on pages D-62 through D-65. Service instructions for mounting are included with each unit or replacement bearing and should be closely followed. Replacement bearings are not prelubricated but are coated with a mineral base preservative and should be further protected from moisture and dirt, especially during installation.

Housing Mounting: Series B22400 and B22500 mounted units have drilled or cored mounting bolt holes suitable for the inch or metric bolts listed. Drilled holes will be ¹⁄₃₂" (0.8 mm) larger than the largest inch bolt shown. Cast slots in pillow blocks are normally ¹⁄₁₆" wider than the specified mounting bolt nominal diameter. It is expected that plain washers will be used under the bolt head to span the slot width and aid torquing. Narrow (N) series washers per ANSI B18.22.1-1981 (previously designated SAE series) are recommended. If wide series washers are used, the full length of the slot may not be usable for positioning the unit.

Recommended Shaft Tolerances Shaft Diameter 1"–2" 2¹⁄₁₆"–5" 17 mm–50 mm 55 mm–125 mm

Tolerance Nominal to –.0005" Nominal to –.0010" Nominal to –0.013 mm Nominal to –0.025 mm

The above shaft tolerances are suitable for loads up to .18 C and an L10 life greater than 20,000 hours. For more severe conditions, consult Rexnord strength and stiffness for the intended application. It should be round, straight, free of nicks and burrs and of correct size.

Operation: Series B22400 and B22500 mounted units are prelubricated with a good quality petroleum grease of No. 2 consistency which has been tested for operational characteristics and stability for long shelf life. The service instructions packed with each unit provide guidelines for relubrication intervals and recommended greases. The lubricant furnished is generally limited to an operating temperature range of –20°F to +200°F (–29° to 93°C). The lip seal E should be limited to a temperature less than 225°F (107°C ). Where significant thrust loads are applied to B22400 or B22500 mounted units, thrust collars, spacers, shaft shoulders etc.

Corporation. The service life of a collar mounted bearing is largely dependent on shaft fit and may be expected to approach theoretical L10 life only if the bearing is press fitted to a shaft. A slip fit mounting in accordance with the shaft tolerances shown in table will provide generally acceptable service life on normal applications under light to moderate load and speed conditions. A shaft tolerance resulting in looser fits (such as with commercial shafting) may be expected to have greatly reduced reliability and increasing problems of shaft fret wear,

Housings must be selected and installed with regard to the degree and direction of the forces that will occur. Housings should not be Warning: used under tension loads except with The correct selection of bearings or adequate safety factors. For this reason mounted units requires that the magnitude pillow blocks are best suited to withstand and nature of all loads, speeds, alignment, radial loads ing through the base. mounting, operating requirements, and When heavy loads or shock loads are maintenance be adequately considered. possible, it is most important to mount a unit The selection of materials for and design of so that the unit is directly and substantially housings, shafting, fasteners, seals, and ed other than through its mounting accessories, as well as provisions for bolts. Where the line of force falls outside installation and maintenance, must follow the base, such as with horizontal or uplift good engineering principles. loads on pillow blocks, serious housing and fastener deflection or failure

should be utilized to the thrust so that it is not transmitted through the locking collars and set screws. These units have a misalignment capability of ±2°. They are factory adjusted with sufficient clearance for operation within stated speed limits.

Takeups: The mounting of B22400 and B22500 pillow blocks on universal LHD takeup frames is illustrated on page D-22. Smaller pillow blocks can be mounted on LC frames, see page B-60.

Fixed and Expansion Units: Fixed and expansion type units are available in series B22400 and B22500 pillow blocks and flanged units. As these units are designed for slip fitted shafts, collar mounted, two fixed units can usually be applied to a shaft. Expansion units are recommended for use on one end of longer shafts, where s are not steel or where significant temperature differentials are expected between shafts and mounting structures.

bearing inner ring fracture and shaft slippage. In general, looser fits than recommended are feasible only for very light loading and lower speeds. Prototype or field testing is strongly recommended if looser fits must be considered. Shafting should be designed for adequate

may occur. These conditions may require designs using different materials, fasteners, mounting design, stops bars, etc., together with proper safety factors. When these conditions are unavoidable LinkBelt Bearing Division, Rexnord Corp. should be consulted. Service instructions are provided with shipments of bearings and are available on request. These instructions provide detailed information to aid in the proper installation, operation, and maintenance, and should be carefully read and followed. Failure to do so may result in unsatisfactory service as well as serious personal injury or property D-68 damage.


Max Mount™ Series B22600 Housing End Closures:

for positioning the unit.

All fixed type B22600 mounted units can be purchased with formed steel closed end caps on the collar side which covers all rotating elements. Two housing seals are provided to protect the bearing during mounting or in case of accidental cap removal. Closed end units have a special extended threaded cover for mounting the end cap. They are designated with the suffix HHC or EEC (i.e., PB22631HHC). Shafting should not extend beyond the end of the bearing inner ring more than ¹⁄₈" (3.2 mm) when end caps are to be used.

Replacement Parts:

Housing Mounting:

Operation:

Bearings and seals can be replaced in Series B22600 mounted units (except CSE units). Replacement parts are listed on pages D-66 and D-67. Service instructions for mounting are included with each unit or replacement bearing and should be closely followed. Replacement bearings are not prelubricated but are coated with a mineral base preservative and should be further protected from moisture and dirt, especially during installation.

Series B22600 mounted units have drilled or cored mounting bolt holes suitable for the inch or metric bolts listed. Drilled holes will be ¹⁄₃₂" (0.8 mm) larger than the largest inch bolt shown. Cast slots in pillow blocks are normally ¹⁄₁₆" wider than the specified mounting bolt nominal diameter. It is expected that plain washers will be used under the bolt head to span the slot width and aid torquing. Narrow (N) series washers per ANSI B18.22.1-1981 (previously designated SAE series) are recommended. If wide series washers are used, the full length of the slot may not be usable

Series B22600 mounted units are prelubricated with a good quality petroleum grease of No. 2 consistency which has been tested for operational characteristics and stability for long shelf life. The service instructions packed with each unit provide guidelines for relubrication intervals and recommended greases. The lubricant furnished is generally limited to an operating temperature range of –20°F to +200°F (–29° to 93°C). The lip seal E should be limited to a temperature less than 225°F (107°C ).

Recommended Shaft Tolerances

The above shaft tolerances are suitable for loads up to .18C and an L10 life greater than 20,000 hours. For more severe conditions, consult the Rexnord Corporation.

Shaft Diameter 1"–2" 2¹⁄₁₆"–4" 3¹⁄₁₆"–5" 17 mm–50 mm 55 mm–100 mm 110 mm–125 mm

Tolerance Nominal to –.003" Nominal to –.004" Nominal to –.005" Nominal to –0.076 mm Nominal to –0.102 mm Nominal to –0.127 mm

Warning: The correct selection of bearings or mounted units requires that the magnitude and nature of all loads, speeds, alignment, mounting, operating requirements, and maintenance be adequately considered. The selection of materials for and design of housings, shafting, fasteners, seals, and accessories, as well as provisions for installation and maintenance, must follow good engineering principles.

D-69

The service life of an adapter mounted bearing is largely dependent on a correctly tightened adapter. Improperly tightened bearings and adapter assemblies may slip or turn on the shaft. The proper procedure for tightening the adapter assembly is specified in the service instructions B-RBU-47. Refer to Housings must be selected and installed with regard to the degree and direction of the forces that will occur. Housings should not be used under tension loads except with adequate safety factors. For this reason pillow blocks are best suited to withstand radial loads ing through the base. When heavy loads or shock loads are possible, it is most important to mount a unit so that the unit is directly and substantially ed other than through its mounting bolts. Where the line of force falls

Where significant thrust loads are applied to B22600 mounted units, thrust collars, spacers, shaft shoulders etc. should be utilized to the thrust so that it is not transmitted through the locking collars and set screws. These units have a misalignment capability of ±2°. They are factory adjusted with sufficient clearance for operation within stated speed limits.

Takeups: The mounting of B22600 pillow blocks on universal LHD takeup frames is illustrated on page D-22. Smaller pillow blocks can be mounted on LC frames, see page B-60.

Fixed and Expansion Units: Fixed and expansion type units are available in series B22600 pillow blocks and flanged units. Expansion units are recommended for use on one end of the shaft, unless special consideration is taken into for axial movement when mounting the adapter assemblies. In the case of fixed units only, consult the Link-Belt Bearing Division for proper mounting instructions.

these instructions before mounting the B22600 series bearings. The shafting should be designed for adequate strength and stiffness for the intended application. It should be round, straight, free of nicks and burrs and of the correct size.

outside the base, such as with horizontal or uplift loads on pillow blocks, serious housing and fastener deflection or failure may occur. These conditions may require designs using different materials, fasteners, mounting design, stops bars, etc., together with proper safety factors. When these conditions are unavoidable Link-Belt Bearing Division, Rexnord Corp. should be consulted.

Nomenclature

Series B22400, B22500 and B22600 Spherical Roller Bearing Units Symbol C CSE EF EP F FB FC P PK T DS DSH

Description

P

Collar opposite cover (B22400 only)

E

Expansion unit (not used with CSE symbol)

400 series designation (one locking collar) 500 series designation (two locking collars) 600 series designation (adapter mounted)

B

Inner ring bore equal to a bore of preceding smaller bearing group

Four bolt base pillow block

H E

Floating labyrinth seal Spring-loaded lip seal (For closed end units use (2) i.e.: HHC)

17H

F

H

C

17H

Shaft diameter in 16ths of an inch Metric series, bore in mm

F

C 18

39

Spherical roller bearing; extended inner ring separable outer rings

4 5 6

39 M55

4

Cartridge unit Cartridge unit; steel housing Flanged unit; 4-bolt square Pillow block; cast iron Flanged unit; 3- and 4-bolt Flanged bracket unit Flanged cartridge unit; 4-bolt round Pillow block Pillow block; cast steel housing Takeup unit, slotted guides Takeup, conveyor, hinged top, welded steel frame Takeup, conveyor, extra strength, welded steel frame

R

B22

E -B22

Closed end unit Takeup adjustment, inches Grease designation


D-70

Spherical Roller Bearing Pillow Blocks and Takeups Contents Series 6600, 6800, SAF22600, 7600, 7800, SAF22300 Introduction ................................... E-1 Product Index ................................ E-3 Selection ........................................ E-7 Load Ratings ................................. E-9 Dimensions .................................. E-15 Nomenclature .............................. E-27 Replacement Parts ..................... E-29 Additional Information ................ E-34

Series 6600, 6800, 6900, SAF22600, 7600, 7800, 7900, SAF22300

a Spherical roller bearings may be direct or adapter mounted. Housings have provision for fixed or expansion mounting.

Spherical Roller Bearing Pillow Blocks and Takeups

b Choice of seals — Type R multilabyrinth, D5 Pentac®, or Type D8 independently flushable seals — effectively retain lubricant and exclude contaminants.

Self-aligning spherical roller bearing pillow blocks and takeups provide high load carrying capacity for radial or combination radial and thrust loads. They are designed for use on conveyors, dryers, road building equipment, runout tables, fans, crushers, hammermills and many other high-precision, heavy-duty applications.

c Removable housing cap facilitates bearing mounting, inspection and maintenance. d Mating surfaces are machined. Caps and bases matched and marked. e Base and cap are dowelled for accurate assembly and security. f Oil or grease lubrication ready. Large lubricant reservoir in base prolongs lubrication interval. g Slotted bolt holes in base facilitate mounting; machined finish on base for firm seating on ing surface. Pry slots for easy cap removal.

8

8 Dimpled flats for bearing monitor probes.

a c

b

d e

f

g

E-1

A Seal Choice for Every Environment Select the proper seal from Link-Belt's seal menu.

Dirt / Dust Speed Wash Down ✔ Good

✔✔ Better

®

Triple Ring R Seal

PenTac D5 Seal

Taconite D8 Seal

Wash Down T Seal

✔ ✔✔✔ ✔

✔✔ ✔✔ ✔✔

✔✔✔ ✔ ✔✔

✔ ✔✔ ✔✔✔

✔✔✔ Best

Metal Triple-Ring R Seal This industry standard seal provides a labyrinth grease chamber between the housing grooves and the seal rings. Operates at high speed; good for moderate dust, dirt or moisture.

D5 PenTac 5-Point Sealing System Rugged lip seal, molded on a Kevlar® body, rotates with the shaft. The PenTac seal acts as a flinger, keeping debris away from the seal area, and provides five seal points. 1 - Seals shaft 2 - Seals housing 3 - Creates a grease chamber to prevent bearing contamination 4 - Acts as a flinger 5 - Grease chambers created by multi-labyrinth chamber

D8 Taconite Sealing System A rugged cast carrier protects a metal labyrinth outboard seal and a spring-loaded inboard seal. When independently lubricated, the D8 system directs the grease between the two seals, purging all contaminants before they can reach the bearing chamber. Thousands are in use in the toughest applications worldwide.

Exclusive T Water Seal Available on special order, this patented seal was developed for use on equipment which experiences constant water splash or frequent wash down. The unique T-shaped lip seal rides in a stainless steel carrier and rotates with the shaft. It seals the shaft and its one-way, double- lips allow for grease purge from the bearing chamber, but prevent the reverse flow of water or debris. Link Belt’s T seal is the standard in the environmental equipment industry. Link Belt Bearing offers Pillow Blocks with special features for severe wash down environments. Black Rilsan Nylon 11 coated housings, stainless steel hardware and end caps or solid closed end housings, and the patented T water seal are the standard features of the BP-LB6800C series. Units may be further modified to meet specific needs.

Shaft

Part Number

Shaft

Part Number

1⁷⁄₁₆" 2³⁄₁₆" 2⁷⁄₁₆" 2¹¹⁄₁₆" 2¹⁵⁄₁₆"

BP-LB6823 BP-LB6835* BP-LB6839* BP-LB6843* BP-LB6847*

3³⁄₁₆" 3¹⁵⁄₁₆" 4¹⁄₂" 4¹⁵⁄₁₆"

BP-LB6851* BP-LB6863F BP-LB6872F BP-LB6879F

* For four-bolt base add suffix “F.” Unit with one side solid cast closed, add “C” suffix.

E-2

Series P-LB6800, P-LB6600, P-LB6900, SAF22600 Pillow Blocks P-LB6800R 2-bolt base pillow blocks for shafts 1⁷⁄₁₆" through 3¹⁄₂", 40 mm through 90 mm. P-LB6800FR 4-bolt base pillow block for shafts 2⁷⁄₁₆" through 8", 65 mm through 200 mm. These pillow blocks have Series 22200LBK tapered bore spherical roller bearings with adapter assemblies. They are available with open or closed ends, fixed or expansion type, for grease or oil lubrication. Load ratings on pages E-9 through E-12. Dimensions on pages E-15 and E-16. Additional information on page E-34.

Pillow Blocks P-LB6600FR 4-bolt base pillow blocks for shafts 8⁷⁄₁₆" through 10¹⁄₂", 220 mm through 300 mm. These pillow blocks have Series 23000LBK tapered bore spherical roller bearing with adapter assemblies. They are available with open or closed ends, fixed or expansion type, for grease or oil lubrication. Load ratings on pages E-10 through E-12. Dimensions on page E-16.

Additional information on page E-34.

Pillow Blocks P-LB6800D8 2-bolt base pillow blocks for shafts 1⁷⁄₁₆" through 3¹⁄₂". P-LB6800FD8 4-bolt base pillow blocks for shafts 2⁷⁄₁₆" through 8". P-LB6600FD8 4-bolt base pillow blocks for shafts 8⁷⁄₁₆" through 10¹⁄₂". These pillow blocks are equipped with type D8 sealing systems for extreme adverse operating conditions and have Series 22200LBK or 23000LBK tapered bore spherical roller bearings with adapter assemblies. They are available with open or closed ends, fixed or expansion type, for grease lubrication. Load ratings on pages E-9 through E-12.

Dimensions on pages E-17 and E-18. Additional information on page E-34.

Pillow Blocks P-LB6900R 2-bolt base pillow blocks for shafts 1⁷⁄₁₆" through 2¹⁵⁄₁₆". P-LB6900FR 2-bolt base pillow blocks for shafts 2³⁄₁₆" through 2¹⁵⁄₁₆". SAF22600 4-bolt base pillow blocks for shafts 3³⁄₁₆" through 5¹⁵⁄₁₆". These pillow blocks have Series 22300LBK tapered bore spherical roller bearings with adapter assemblies. They are available with open or closed ends, fixed or expansion type, for grease or oil lubrication. Load ratings on pages E-13 and E-14. Dimensions on page E-23. Additional information on page E-34.

E-3

Series P-LB7800, P-LB7600, P-LB7900, SAF22300 Series DS-LB6800 Pillow Blocks P-LB7800R 2-bolt base pillow blocks with bearing bores 2.9528" (75 mm) through 3.9370" (100 mm). P-LB7800FR 4-bolt base pillow blocks with bearing bores 2.9528" (75 mm) through 8.6614" (220 mm). These pillow blocks have Series 22200LB cylindrical bore spherical roller bearings for direct shaft mounting. They are available with open or closed ends, fixed or expansion type, for grease or oil lubrication. Load ratings on pages E-9 through E-12. Dimensions on page E-21. Additional information on page E-34.

Pillow Blocks P-LB7600FR 4-bolt base pillow blocks with bearing bores 9.4488" (240 mm) through 11.0236" (280 mm). These pillow blocks have Series 23000LB cylindrical bore spherical roller bearings for direct shaft mounting. They are available with open or closed ends, fixed or expansion type, for grease or oil lubrication. Load ratings on pages E-10 and E-12. Dimensions on page E-21. Additional information on page E-34.

Pillow Blocks P-LB7900R 2-bolt base pillow block with bearing bores 1.7717" (45 mm) through 3.3465" (85 mm). P-LB7900FR 4-bolt base pillow block with bearing bores 2.5591" (65 mm) through 3.3465" (85 mm). SAF22300 4-bolt base pillow blocks with bearing bores 3.5433" (90 mm) through 6.6929" (170 mm). These pillow blocks have Series 22300LB cylindrical bore spherical roller bearings for direct shaft mounting. They are available with open or closed ends, fixed or expansion type, for grease or oil lubrication. Load ratings on pages E-13 and E-14. Dimensions on page E-24. Additional information on page E-34.

Takeups DS-LB6800 conveyor takeups with hinged top welded steel frame and Series 22200LBK tapered bore spherical roller bearings with adapter assemblies. Bearing bores are parallel to the base of the frame.They are available with open or closed ends, fixed or expansion type, for grease lubrication. LHD heavy duty sliding base welded steel frame are available for pillow block mounting. Load ratings on pages E-9 through E-12. Dimensions on pages E-25 and E-26. Additional information on page E-34.

E-4

Series PK-LB6800, PK-LB6600

Pillow Blocks PK-LB6800FR 4-bolt base pillow block for shafts 2⁷⁄₁₆" through 8", 65 mm through 200 mm. These cast steel pillow blocks have Series 22200LBK tapered bore spherical roller bearings with adapter assemblies. They are available with open or closed ends, fixed or expansion type, for grease or oil lubrication. Load ratings on pages E-9 through E-12. Dimensions on page E-19. Additional information on page E-34.

Pillow Blocks PK-LB6600FR 4-bolt base pillow blocks for shafts 8⁷⁄₁₆" through 10¹⁄₂", 220 mm through 260 mm. These cast steel pillow blocks have Series 23000LBK tapered bore spherical roller bearings with adapter assemblies. They are available with open or closed ends, fixed or expansion type, for grease or oil lubrication. Load ratings on pages E-10 through E-12. Dimensions on page E-19. Additional information on page E-34.

Pillow Blocks PK-LB6800FD8 4-bolt base pillow blocks for shafts 2⁷⁄₁₆" through 8". PK-LB6600FD8 4-bolt base pillow blocks for shafts 8⁷⁄₁₆" through 10¹⁄₂". The cast steel pillow blocks are equipped with type D8 independently flushable seals for extreme adverse operating conditions and have Series 22200LBK or 23000LBK tapered bore spherical roller bearings with adapter assemblies. They are available with open or closed ends, fixed or expansion type, for grease lubrication. Load ratings on pages E-9 through E-12. Dimensions on page E-20. Additional information on page E-34.

E-5

Series PK-LB7800, PK-LB7600

Pillow Blocks PK-LB7800FR 4-bolt base pillow blocks with bearing bores 2.9528" (75 mm) through 8.6614" (220 mm). These cast steel pillow blocks have Series 22200LB cylindrical bore spherical roller bearings for direct shaft mounting. They are available with open or closed ends, fixed or expansion type, for grease or oil lubrication. Load ratings on pages E-9 through E-12. Dimensions on page E-22. Additional information on page E-34.

Pillow Blocks PK-LB7600FR 4-bolt base pillow block with bearing bores 9.4488" (240 mm) through 11.0236" (280 mm). These cast steel pillow blocks have Series 23000LB cylindrical bore spherical roller bearings for direct shaft mounting. They are available with open or closed ends, fixed or expansion type, for grease or oil lubrication. Load ratings on pages E-10 through E-12. Dimensions on page E-22. Additional information on page E-34.

E-6

Selection

Series 6600, 6800, 6900, 7600, 7800, 7900, 22600, 22300 To select a pillow block, determine the applied radial load, the applied thrust load, the desired Rating Life, the required minimum shaft size, and applicable operating conditions. The procedure shown here will aid in selecting a pillow block to meet an L₁₀ design life. The formulas for calculating life expectancy should be used to determine the Rating Life L₁₀ for the pillow block selected. Spherical roller bearing pillow blocks are available in Series 6600, 6800, 22600, 7600, 7800, and 22300. Because a number of series

are available, several different pillow blocks that will fulfill and L₁₀ life requirement can often be chosen.

are based on fatigue life. The Rating Life L₁₀ or fatigue life at 90% reliability is the usual basis for bearing selection.

Some of the factors to consider when choosing between series are: cost, speed limit, minimum shaft diameter, thrust load, space limitations, and type of shaft mounting.

For radial load applications only, Table 3, page E-11 and Table 5, page E-14 can be used to select a unit or to determine L₁₀ life expectancy.

The selection procedures and rating formulas shown here are in agreement with The American Bearing Manufacturers Association Standards and ANSI/ ABMA Standards STD 11-1990. Ratings

Bearing Selection Step 1 Determine an appropriate L₁₀ design life. Operating time, Type of service hours per year Heavy seasonal usage Industrial—8 hour shift Industrial—16 hour shift Industrial—continuous Industrial—High reliability Step 2 Determine a required

1,400 to 1,600 2,000 4,000 8,700 —

Design life, years 4-6 10 10 10 —

L₁₀ design life, hours 8,000 20,000 40,000 80,000 to 100,000 120,000 to 300,000

from Table 1.

Step 3 Calculate the required C and select a roller bearing pillow block. a For radial load only: P = Fr required C =

P using

from Step 2

Select a roller bearing pillow block from Table 2, page E-9, or Table 4, page E-13 having a basic load rating C equal to or greater than the required C. b For combined radial and thrust loads: Select a roller bearing pillow block of the desired shaft size from Table 2, page E-9 or Table 4, E-13. Calculate the ratio of thrust load Fa to the radial load Fr.

Calculate the equivalent radial load P P = XFr + YF a If


If

is greater than e, then P = X 2Fr + Y2Fa

For values of e, X1, Y1, X2, and Y2, see Table 2, page E-9 or Table 4, page E-13. Calculate the required C required C =

E-7

P using

from Step 2

Consult the bearing rating Table 2, page E-9 or Table 4, page E-13 to see if the selected bearing meets or exceeds the required C. The life expectancy of other sizes and series of bearings can be calculated similarly.

To assure a satisfactory bearing application, fitting practice, mounting, lubrication, sealing, static rating, housing strength, operating conditions and maintenance must be considered.

Selection

Series 6600, 6800, 6900, 7600, 7800, 7900, 22600, 22300

C Co e Fa Fr L₁₀ n P X Y

= = = = = = = = = =

symbols for formulas: basic load rating, pounds (or newtons) static load rating, pounds (or newtons) a reference value thrust load, pounds (or newtons) radial load, pounds (or newtons) rating life, hours speed, revolutions per minute equivalent radial load, pounds (or newtons) radial factor thrust factor

basic formulas:

(

=

L₁₀ T n T 60 1,000,000

10/3

3/10

)

L₁₀ =

T 1,000,000

n T 60



Step 1 Determine the equivalent radial load P. ratio


Speed, n 50

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

a

100

200

300

P = Fr

400

500

600

700

800

1.93 2.11 2.25 2.38 2.59 2.77 2.93 3.07 3.19 3.31 3.42 3.65 3.86 4.04 4.20 4.36 4.50 4.75 4.97 5.18 5.36 5.54 6.25 6.81

2.38 2.93 3.31 3.61 2.59 3.19 3.61 3.93 2.77 3.42 3.86 4.20 2.93 3.61 4.07 4.44 3.19 3.93 4.44 4.84 3.42 4.20 4.75 5.18 3.61 4.44 5.02 5.47 3.78 4.65 5.25 5.73 3.93 4.84 5.47 5.96 4.07 5.02 5.66 6.18 4.20 5.18 5.85 6.37 4.50 5.54 6.25 6.81 4.75 5.85 6.60 7.20 4.97 6.12 6.92 7.54 5.18 6.37 7.20 7.85 5.36 6.60 7.46 8.13 5.54 6.81 7.70 8.39 5.85 7.20 8.13 8.86 6.12 7.54 8.51 9.28 6.37 7.85 8.86 9.66 6.60 8.13 9.18 10.00 6.81 8.39 9.48 10.30 7.70 9.48 10.70 11.70 8.39 10.30 11.70 12.70

3.86 4.20 4.50 4.75 5.18 5.54 5.85 6.12 6.37 6.60 6.81 7.29 7.70 8.06 8.39 8.69 8.97 9.48 9.92 10.30 10.70 11.00 12.50 13.60

4.07 4.44 4.75 5.02 5.47 5.85 6.18 6.47 6.73 6.97 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.00 10.50 10.90 11.30 11.70 13.20 14.40

4.27 4.65 4.97 5.25 5.73 6.12 6.47 6.77 7.05 7.30 7.54 8.06 8.51 8.92 9.28 9.61 9.92 10.50 11.00 11.40 11.80 12.20 13.80 15.00

4.44 4.84 5.18 5.47 5.96 6.37 6.73 7.05 7.34 7.60 7.85 8.39 8.86 9.28 9.66 10.00 10.30 10.90 11.40 11.90 12.30 12.70 14.40 15.70

900

1000

1200

1500

1800

2400

3000

3600

6000

4.60 5.02 5.36 5.66 6.18 6.60 6.97 7.30 7.60 7.88 8.13 8.69 9.18 9.61 10.00 10.40 10.70 11.30 11.80 12.30 12.80 13.20 14.90 16.20

4.75 5.18 5.54 5.85 6.37 6.81 7.20 7.54 7.85 8.13 8.39 8.97 9.48 9.92 10.30 10.70 11.00 11.70 12.20 12.70 13.20 13.60 15.40 16.70

5.02 5.47 5.85 6.18 6.73 7.20 7.60 7.96 8.29 8.59 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.30 12.90 13.40 13.90 14.40 16.20 17.70

5.36 5.85 6.25 6.60 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.10 10.70 11.20 11.70 12.10 12.50 13.20 13.80 14.40 14.90 15.40 17.30 18.90

5.66 6.18 6.60 6.97 7.60 8.13 8.59 8.99 9.36 9.70 10.00 10.70 11.30 11.80 12.30 12.80 13.20 13.90 14.60 15.20 15.70 16.20 18.30 20.00

6.18 6.73 7.20 7.60 8.29 8.86 9.36 9.80 10.20 10.60 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.20 15.90 16.50 17.10 17.70 20.00 21.80

6.60 7.20 7.70 8.13 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.50 13.20 13.80 14.40 14.90 15.40 16.20 17.00 17.70 18.30 18.90 21.40 23.30

6.97 7.60 8.13 8.59 9.36 10.00 10.60 11.10 11.50 11.90 12.30 13.20 13.90 14.60 15.20 15.70 16.20 17.10 17.90 18.70 19.40 20.00 22.60 24.60

8.13 8.86 9.48 10.00 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.40 16.20 17.00 17.70 18.30 18.90 20.00 20.90 21.80 22.60 23.30 26.30 28.70

b For combined radial and thrust load: P = XF r + YFa If

is equal to or less than e, then P = X 1Fr + Y 1Fa

If

is greater than e, then P = X 2Fr + Y 2Fa

For values of e, X1, Y1, X2, and Y2, consult the appropriate bearing rating Table 2, page E-9 or Table 4, page E-13. Step 2 Calculate the ratio of the basic load rating C to the equivalent radial load. C P Step 3 Approximate the bearing life from Table 1.

Life Adjustment

Speed, n

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000



Ln = a₁a₂a₃L₁₀ ,

Ln = Adjusted life for (100-n) % reliablility, a₁ = Life adjustment factor for reliability a₂ = Life adjustment factor for material and processing a₃ = Life adjustment factor for operating conditions. For most normal applications, all factors will be taken as 1, and the Rating Life used as the selection basis or life estimate. In addition, as long as standard catalog bearings are used, a₂ will be normally set equal to one. The factor a₃ covers such things as lubrication, misalignment, and temperature. Some conditions that could yield a₃ significantly different than unity include speeds less than 20000 DN or greater than 200000 DN, temperatures below –40°F (–40°C) or above 275°F (135°C). For other possible conditions, as well as additional information on life adjustment factors, consult Link-Belt Bearing Division, Rexnord Corp. E-8

where

Selection

Series 6600, 6800, 7600, 7800 Table 2 • Load ratings and speed limits Approximate speed limit RPM V

Basic unit number Adapter mounted Shaft diameter inches/mm

Direct shaft mounted

Bearing size number


C Basic load rating

pounds/ newtons

pounds/ newtons

oil

1⁷⁄₁₆ 1¹⁄₂ 40

LB6823 LB6824 LB68M40

... ... ...

... ... ...

22209LB

23600 105000

20800 92500

6200

5300

5300

1¹¹⁄₁₆ 1³⁄₄ 45

LB6827 LB6828 LB68M45

... ... ...

... ... ...

22210LB

25500 113000

22000 97900

5500

5000

1¹⁵⁄₁₆ 2 50

LB6831 LB6832 LB68M50

... ... ...

... ... ...

22211LB

32500 145000

27000 120000

5000

2³⁄₁₆ 60

LB6835 LB68M60

... ...

... ...

22213LB

46500 207000

38000 169000

2⁷⁄₁₆ 65

LB6839 LB68M65

75

LB7875

22215LB

53000 236000

2¹¹⁄₁₆ 70

LB6843 LB68M70

80

LB7880

22216LB

2¹⁵⁄₁₆ 3 75

LB6847 LB6848 LB68M75

85

LB7885

3³⁄₁₆ 80

LB6851 LB68M80

90

3⁷⁄₁₆ 3¹⁄₂ 90

LB6855 LB6856 LB68M90

3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4 100

number

≤e

e

number

Bearing seat mm

D5 PenTac ™ grease 1mm Push-in ■

>e

X₁

Y₁

X₂

Y₂

.26

1.00

2.6

.67

3.9

5000

.26

1.00

2.8

.67

4.2

4500

4500

.23

1.00

2.9

.67

4.4

4300

3800

3800

.24

1.00

2.8

.67

4.2

41500 185000

3700

3400

3400

.22

1.00

3.1

.67

4.6

58500 260000

46500 207000

3500

3200

3200

.22

1.00

3.1

.67

4.7

22217LB

73500 327000

58500 260000

3250

3000

3000

.22

1.00

3.0

.67

4.5

LB7890

22218LB

81500 363000

64000 285000

3000

2600

2600

.23

1.00

2.9

.67

4.3

100

LB78100

22220LB

104000 463000

80000 356000

2800

2200

2200

.24

1.00

2.8

.67

4.2

LB6859 LB6863 LB6864 LB68M100

110

LB78110

22222LB

132000 587000

102000 454000

2500

2000

2000

.25

1.00

2.7

.67

4.0

4³⁄₁₆ 110

LB6867 LB68M110

120

LB78120

22224LB

163000 725000

120000 534000

2300

1900

1900

.25

1.00

2.7

.67

4.0

4⁷⁄₁₆ 4¹⁄₂ 115

LB6871 LB6872 LB68M115

130

LB78130

22226LB

196000 872000

143000 636000

2100

1800

1800

.26

1.00

2.6

.67

3.9

4¹⁵⁄₁₆ 5 125

LB6879 LB6880 LB68M125

140

LB78140

22228LB

228000 1010000

166000 738000

1950

1700

1700

.25

1.00

2.7

.67

4.0

Continued on facing page.

E-9

Table 2 • Load ratings and speed limits (continued) Approximate speed limit RPM

Basic unit number Adapter mounted

Bearing size number

C Static load rating

pounds/ newtons

pounds/ newtons

oil

V

number

5³⁄₁₆

LB6883 LB68M135

150

LB78150

22230LB

270000 1200000

190000 845000

1850

1600

1600

5⁷⁄₁₆

LB6887 LB68M140

160

LB78160

22232LB

310000 1380000

216000 961000

1700

1500

5¹⁵⁄₁₆ 6

LB6895 LB6896 LB68M150

170

LB78170

22234LB

345000 1530000

250000 1110000

1600

6⁷⁄₁₆ 6¹⁄₂

LB68103 LB68104 LB68M160

180

LB78180

22236LB

365000 1620000

255000 1130000

6¹⁵⁄₁₆ 7

LB68111 LB68112 LB68M170

190

LB78190

22238LB

415000 1850000

7³⁄₁₆

LB68115 LB68M180

200

LB78200

22240LB

7¹⁄₂ 7¹⁵⁄₁₆ 8

LB68120 LB68127 LB68128 LB68M200

220

LB78220

8⁷⁄₁₆ 8¹⁄₂ 8¹⁵⁄₁₆ 9

LB66135 LB66136 LB66143 LB66144 LB66M220

240

9⁷⁄₁₆ 9¹⁄₂ 9¹⁵⁄₁₆ 10 10⁷⁄₁₆ 10¹⁄₂

LB66B151 LB66B152 LB66159 LB66160 LB66167 LB66168 LB66M260

280

135 140

150

160

170 180

200

220

number

≤e

e

Bearing seat mm

Shaft diameter mm/inches

260



D5 PenTac ™ grease 1mm Push-in ■

>e

X₁

Y₁

X₂

Y₂

.25

1.00

2.7

.67

4.0

1500

.26

1.00

2.6

.67

3.9

1300

1300

.26

1.00

2.6

.67

3.9

1500

1300

1300

.25

1.00

2.7

.67

4.0

270000 1200000

1400

1200

1200

.28

1.00

2.4

.67

3.6

450000 2000000

300000 1330000

1300

1100

1100

.29

1.00

2.3

.67

3.5

22244LB

550000 2450000

365000 1620000

1200

1000

1000

.29

1.00

2.3

.67

3.5

LB76240

23048LB

490000 2180000

260000 1160000

1100

1000

100

.25

1.00

2.7

.67

4.1

LB76280

23056LB

670000 2980000

345000 1530000

950

850

850

.25

1.00

2.7

.67

4.1

V Speed limits are based on the following: 1. Type R seals properly aligned. a. For the type B seals, limit is 800 surface feet per minute (4.0 m/s) with good alignment. b. For type D8 seals, limit is 1500 surface feet per minute (7.6 m/s) with good alignment. 2. Proper operating internal clearance. 3. Adequate lubrication and maintenance (special lubricants and/or more frequent relubrication may be required). 4. Normal room temperature environment and no extraneous heat sources, such that bearing operating temperature does not exceed 100°C (212°F). 5. Equivalent radial load not greater than 7% of C. 6. Axial load, if any, not greater than 20% of radial load. Additional information, page E-34. ■ D5 Pentac™ speed limits in the chart are based on pushing the Pentac™ seal against the housing face a distance of 1mm as specified by the service instructions. The Pentac™ seal can be pressed in a distance of 2mm for high contaminant environments. The speed limit at a 2mm "Push-In" distance should be limited to 80% of those listed in the chart.

E-10

Load Ratings

Series 6600, 6800, 7600, 7800 Table 3 • Radial load ratings in pounds at various RPM for appropriate L₁₀ life hours

Adapter mounted

LB6823 LB6824 LB68M40

LB6827 LB6828 LB68M45

LB6831 LB6832 LB68M50

LB6835 LB68M60

LB6839 LB68M65

LB6843 LB68M70

LB6847 LB6848 LB68M75

LB6851 LB68M80

LB6855 LB6856 LB68M90

LB6859 LB6863 LB6864 LB68M100

LB6867 LB68M110



250

500

750

900

1200

1500

1800

2000

2500

3000

3500

4000

4500

5000

—

3000 8000 20000 40000 100000

10800 8020 6090 4950 3760

6640 4950 3760 3050 2320

5390 4020 3050 2480 1880

4770 3560 2700 2200 1670

4520 3370 2560 2080 1580

4150 3090 2350 1910 1450

3880 2890 2200 1780 1350

3670 2740 2080 1690 1280

3560 2650 2010 1640 1240

3330 2480 1880 1530 1160

3150 2350 1780 1450 1100

3010 2240 1700 1380 1050

2890 2150 1640 1330 1000

2790 2080 1580 1280 974

2700 2010 1530 1240 944

—

3000 8000 20000 40000 100000

11400 8480 6440 5230 3970

7020 5230 3970 3230 2450

5700 4250 3230 2620 1990

5050 3760 2860 2320 1760

4780 3560 2710 2200 1670

4390 3270 2480 2020 1530

4100 3060 2320 1890 1430

3880 2890 2200 1790 1360

3760 2800 2130 1730 1310

3520 2620 1990 1620 1230

3330 2480 1890 1530 1160

3180 2370 1800 1460 1110

3060 2280 1730 1410 1060

2950 2200 1670 1360 1030

2860 2130 1620 1310 998

—

3000 8000 20000 40000 100000

14000 10400 7910 6420 4880

8620 6420 4880 3960 3010

7000 5220 3960 3220 2440

6200 4620 3510 2850 2160

5870 4370 3320 2700 2050

5380 4010 3050 2470 1880

5030 3750 2850 2310 1760

4770 3550 2700 2190 1660

4620 3440 2610 2120 1610

4320 3220 2440 1990 1510

4090 3050 2310 1880 1430

3900 2910 2210 1800 1360

3750 2790 2120 1720 1310

3620 2700 2050 1660 1260

3510 2610 1990 1610 1220

—

3000 8000 20000 40000 100000

19700 14600 11100 9040 6870

12100 9040 6870 5580 4240

9850 7340 5580 4530 3440

8720 6500 4940 4010 3050

8260 6150 4670 3800 2880

7580 5640 4290 3480 2650

7090 5280 4010 3260 2470

6710 5000 3800 3080 2340

6500 4840 3680 2990 2270

6080 4530 3440 2790 2120

5760 4290 3260 2650 2010

5500 4090 3110 2530 1910

5280 3930 2990 2430 1840

LB7875

3000 8000 20000 40000 100000

21500 16000 12200 9870 7500

13200 9870 7500 6090 4630

10800 8020 6090 4950 3760

9530 7100 5390 4380 3330

9020 6720 5110 4150 3150

8270 6160 4680 3800 2890

7740 5770 4380 3560 2700

7330 5460 4150 3370 2560

7100 5290 4020 3260 2480

6640 4950 3760 3050 2320

6290 4680 3560 2890 2200

6000 4470 3400 2760 2090

LB7880

3000 8000 20000 40000 100000

24100 17900 13600 11100 8400

14800 11100 8400 6820 5180

12100 8980 6820 5540 4210

10700 10100 7950 7530 6040 5720 4910 4650 3730 3530

9270 6910 5250 4260 3240

8670 6460 4910 3990 3030

8210 6120 4650 3770 2870

7950 5930 4500 3660 2780

7440 5540 4210 3420 2600

7040 5250 3990 3240 2460

6720 5010 3810 3090 2340

LB7885

3000 8000 20000 40000 100000

30300 22500 17100 13900 10600

18700 13900 10600 8580 6520

15200 11300 8580 6970 5300

13400 12700 10000 9470 7600 7200 6170 5850 4690 4440

11700 8690 6600 5360 4070

10900 8130 6170 5010 3810

10300 7690 5850 4750 3610

10000 7460 5660 4600 3490

9360 6970 5300 4300 3270

8860 6600 5010 4070 3090

LB7890

3000 8000 20000 40000 100000

33100 24700 18700 15200 11600

20400 15200 11600 9390 7130

16600 12400 9390 7630 5790

14700 13900 10900 10400 8320 7870 6750 6400 5130 4860

12800 9510 7220 5870 4460

11900 8890 6750 5490 4170

11300 8420 6400 5190 3950

10900 10200 8160 7630 6200 5790 5030 4710 3820 3580

9690 7220 5490 4460 3390

LB78100

3000 8000 20000 40000 100000

41400 30800 23400 19000 14500

25500 19000 14500 11700 8920

20700 15500 11700 9540 7240

18400 17400 13700 13000 10400 9840 8440 7990 6410 6070

15900 11900 9030 7330 5570

14900 11100 8440 6860 5210

14100 10500 7990 6490 4930

13700 12800 10200 9540 7750 7240 6290 5880 4780 4470

LB78110

3000 8000 20000 40000 100000

52800 39300 29900 24300 18400

32600 24300 18400 15000 11400

26400 19700 15000 12200 9240

23400 17400 13300 10800 8180

22200 16500 12500 10200 7740

20300 15200 11500 9350 7100

19000 14200 10800 8740 6640

18000 13400 10200 8280 6290

17400 16300 13000 12200 9870 9240 8020 7500 6090 5700

LB78120

3000 8000 20000 40000 100000

62100 46300 35100 28500 21700

38300 28500 21700 17600 13400

31100 23200 17600 14300 10900

27500 20500 15600 12700 9620

26100 19400 14800 12000 9110

23900 17800 13500 11000 8360

22400 16700 12700 10300 7810

21200 15800 12000 9740 7400

20500 15300 11600 9440 7170


E-11


Load Ratings

Series 6600, 6800, 7600, 7800 Table 3 • Radial load ratings in pounds at various RPM for appropriate L₁₀ life hours Basic unit number Adapter mounted

LB6871 LB6872 LB68M115

LB6879 LB6880 LB68M125

LB6883 LB68M135

LB6887 LB68M140

LB6895 LB6896 LB68M150

LB68103 LB68104 LB68M160

LB68111 LB68112 LB68M170

LB68115 LB68M180

LB68120 LB68127 LB68128 LB68M200 LB66135 LB66136 LB66143 LB66144 LB66M220 LB66151 LB66152 LB66159 LB66160 LB66167 LB66168 LB66M260




250

500

750

900

1200

1500

1800

2000

LB78130

3000 8000 20000 40000 100000

74000 55100 41900 34000 25800

45600 34000 25800 21000 15900

37100 27600 21000 17000 12900

32800 24500 18600 15100 11500

31100 23200 17600 14300 10900

28500 21200 16100 13100 9960

26700 19900 15100 12300 9310

25200 18800 14300 11600 8820

24500 18200 13800 11200 8540

LB78140

3000 8000 20000 40000 100000

85900 64000 48600 39500 30000

53000 39500 30000 24400 18500

43000 32100 24400 19800 15000

38100 28400 21600 17500 13300

36100 26900 20400 16600 12600

33100 24700 18700 15200 11600

31000 23100 17500 14200 10800

29300 21800 16600 13500 10200

LB78150

3000 8000 20000 40000 100000

98300 73200 55600 45200 34300

60600 45200 34300 27900 21200

49300 36700 27900 22600 17200

43600 32500 24700 20100 15200

41300 30800 23400 19000 14400

37900 28200 21400 17400 13200

35400 26400 20100 16300 12400

33500 25000 19000 15400 11700

LB78160

3000 8000 20000 40000 100000

112000 83300 63200 51400 39000

68900 51400 39000 31700 24100

56000 41700 31700 25700 19600

49600 36900 28100 22800 17300

46900 35000 26600 21600 16400

43100 32100 24400 19800 15000

40300 30000 22800 18500 14100

LB78170

3000 8000 20000 40000 100000

129000 96400 73200 59500 45200

79800 59500 45200 36700 27900

64800 48300 36700 29800 22600

57400 42800 32500 26400 20000

54300 40500 30800 25000 19000

49800 37100 28200 22900 17400

46600 34700 26400 21400 16300

LB78180

3000 8000 20000 40000 100000

132000 98300 74700 60600 46100

81400 60600 46100 37400 28400

66100 49300 37400 30400 23100

58500 43600 33100 26900 20400

55400 41300 31400 25500 19400

50800 37900 28800 23400 17800

LB78190

3000 8000 20000 40000 100000

140000 104000 79100 64200 48800

86200 64200 48800 39600 30100

70000 52200 39600 32200 24400

62000 46200 35100 28500 21600

58700 43700 33200 27000 20500

53800 40100 30500 24700 18800

LB78200

3000 8000 20000 40000 100000

155000 116000 87800 71300 54200

95800 71300 54200 44000 33400

77800 58000 44000 35800 27200

68900 51300 39000 31700 24100

65200 48600 36900 30000 22800

59800 44600 33900 27500 20900

LB78220

3000 8000 20000 40000 100000

189000 117000 141000 86800 107000 65900 86800 53600 65900 40700

94600 70500 53600 43500 33000

83800 62400 47400 38500 29300

79300 59100 44900 36500 27700

72800 54200 41200 33500 25400

LB76240

3000 8000 20000 40000 100000

134000 100000 76100 61800 47000

83000 61800 47000 38200 29000

67400 50200 38200 31000 23500

59700 44500 33800 27400 20800

56500 42100 32000 26000 19700

LB76280

3000 8000 20000 40000 100000

178000 110000 133000 82000 101000 62300 82000 50600 62300 38500

89400 66600 50600 41100 31200

79200 59000 44800 36400 27700

75000 55900 42400 34500 26200

2500

3000

3500

4000

4500

5000

Operation in the high speed shaded areas may require oil lubrication.

E-12

Load Ratings

Series 6900, 7900, SAF22600, SAF22300 Table 4 • Load ratings and speed limits Basic unit number Adapter mounted Shaft diameter inches

number

Direct shaft mounted Bearing seat mm

number

Bearing size number

Co Static load rating

C Basic load rating

pounds/ newtons

pounds/ newtons

Approximate speed limit RPM I oil

grease

<=e

e

>e

X₁

Y₁

x₂

Y₂

1⁷⁄₁₆ 1¹⁄₂

LB6923 LB6924

45

LB7945

22309LB

40000 178000

35500 158000

4800

3800

.36

1.00

1.9

.67

2.8

1¹¹⁄₁₆

LB6927

50

LB7950

22310LB

48000 214000

42500 189000

4300

3400

.36

1.00

1.9

.67

2.8

1¹⁵⁄₁₆ 2

LB6931 LB6932

55

LB7955

22311LB

57000 254000

50000 222000

4000

3200

.36

1.00

1.9

.67

2.8

2³⁄₁₆

LB6935

65

LB7965

22313LB

80000 356000

65500 291000

3400

2600

.34

1.00

2.0

.67

3.0

2⁷⁄₁₆ 2¹⁄₂

LB6939 LB6940

75

LB7975

22315LB

98000 436000

83000 369000

3000

2200

.34

1.00

2.0

.67

3.0

2¹¹⁄₁₆

LB6943

80

LB7980

22316LB

112000 498000

93000 414000

2800

2000

.34

1.00

2.0

.67

3.0

2¹⁵⁄₁₆

LB6947

85

LB7985

22317LB

122000 543000

102000 454000

2600

1900

.33

1.00

2.0

.67

3.0

3³⁄₁₆

22618-303

90

22318

22318LB

140000 623000

114000 507000

2400

1800

.33

1.00

2.0

.67

3.0

3⁷⁄₁₆ 3¹⁄₂

22620-307 22620-308

100

22320

22320LB

183000 814000

146000 649000

2200

1700

.34

1.00

2.0

.67

3.0

3¹⁵⁄₁₆ 4

22622-315 22622-400

110

22322

22322LB

236000 1050000

180000 801000

2000

1600

.33

1.00

2.1

.67

3.1

4³⁄₁₆

22624-403

120

22324

22324LB

260000 1160000

204000 907000

1800

1400

.33

1.00

2.1

.67

3.1

4⁷⁄₁₆

22626-407

130

22326

22326LB

305000 1360000

236000 1050000

1700

1300

.33

1.00

2.1

.67

3.1

4¹⁵⁄₁₆ 5

22628-415 22628-500

140

22328

22328LB

360000 1600000

275000 1220000

1500

1100

.34

1.00

2.0

.67

3.0

5³⁄₁₆

22630-503

150

22330

22330LB

405000 1800000

310000 1380000

1400

1000

.33

1.00

2.0

.67

3.0

5⁷⁄₁₆

22632-507

160

22332

22332LB

425000 1890000

325000 1450000

1300

950

.37

1.00

1.8

.67

2.7

5¹⁵⁄₁₆

22634-515

170

22334

22334LB

475000 2110000

360000 1600000

1300

950

.37

1.00

1.8

.67

2.7

If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp. V Speed limits are based on the following: 1. Type R seals properly aligned. a. For the type B seals, limit is 800 surface feet per minute (4.0 m/s) with good alignment. b. For type D8 seals, limit is 1500 surface feet per minute (7.6 m/s) with good alignment. 2. Proper operating internal clearance. 3. Adequate lubrication and maintenance (special lubricants and/or more frequent relubrication may be required). 4. Normal room temperature environment and no extraneous heat sources, such that bearing operating temperature does not exceed 100°C (212°F). 5. Equivalent radial load not greater than 7% of C. 6. Axial load, if any, not greater than 20% of radial load. Additional information, page E-34.

E-13

Load Ratings

Series 6900, SAF22600, 7900, SAF22300 Table 5 • Radial load ratings in pounds at various RPM for appropriate L₁₀ life hours Basic unit number Adapter mounted


LB6923 LB6924

LB7945

LB6927



100

300

3000 8000 20000 40000

18400 13700 10400 8440

14900 11100 8440 6860

10700 7990 6070 4930

LB7950

8000 20000 40000 100000

22000 16400 12400 10100

17900 13300 10100 8210

LB6931 LB6932

LB7955

3000 8000 20000 40000

25900 19300 14600 11900

LB6935

LB7965

3000 8000 20000 40000

LB6939 LB6940

LB7975

LB6943

500

750

900

1000

1200

9200 6860 5210 4230

8150 6070 4610 3750

7720 5750 4370 3550

7480 5570 4230 3440

7080 5270 4010 3250

12800 9570 7270 5900

11000 8210 6240 5070

9760 7270 5520 4490

9240 6880 5230 4250

8950 6670 5070 4110

21000 15700 11900 9660

15100 11300 8550 6950

13000 9660 7340 5960

11500 8550 6500 5280

10900 8100 6150 5000

33900 25200 19200 15600

27500 20500 15600 12700

19800 14700 11200 9100

17000 15000 12700 11200 9610 8510 7810 6910

3000 8000 20000 40000

42900 32000 24300 19700

34900 26000 19700 16000

25100 18700 14200 11500

LB7980

3000 8000 20000 40000

48100 35800 27200 22100

39100 29100 22100 18000

LB6947

LB7985

3000 8000 20000 40000

52800 39300 29900 24300

22618

22318

3000 8000 20000 40000

22620

22320

22622

1500

1800

2000

2500

3000

3500

4000

6620 4930 3750 3040

6270 4670 3550 2880

6070 4520 3440 2790

5680 4230 3210 2610

5380 4010 3040 2470

5130 3830 2910 2360

4930 3670 2790 2270

8470 6310 4800 3900

7920 5900 4490 3640

7500 5590 4250 3450

7270 5420 4110 3340

6800 5070 3850 3130

6440 4800 3640 2960

6150 4580 3480 2830

5900 4400 3340 2710

10500 7850 5960 4840

9970 7430 5640 4580

9320 6950 5280 4290

8830 6580 5000 4060

8550 6370 4840 3930

8000 5960 4530 3680

7570 5640 4290 3480

7230 5390 4090 3320

6950 5180 3930 3190

14200 10600 8060 6540

13800 10300 7810 6340

13100 9730 7390 6000

12200 11600 9100 8620 6910 6540 5620 5320

11200 8350 6340 5150

10500 7810 5930 4820

9920 7390 5620 4560

9470 7060 5360 4350

21500 19100 16000 14200 12200 10800 9890 8760

18000 13400 10200 8290

17500 13000 9890 8040

16500 12300 9370 7610

15500 14700 14200 11500 10900 10600 8760 8290 8040 7120 6740 6530

13300 9890 7520 6100

12600 9370 7120 5780

28100 20900 15900 12900

24100 21300 18000 15900 13600 12100 11100 9820

20200 15100 11400 9290

19600 14600 11100 9000

18500 13800 10500 8520

17300 16400 15900 12900 12200 11900 9820 9290 9000 7970 7550 7310

14900 11100 8420 6840

42900 31900 24300 19700

30800 23000 17400 14200

26400 19700 15000 12200

23400 17400 13300 10800

22200 16500 12500 10200

21500 16000 12200 9870

20300 15200 11500 9350

19000 18000 17400 14200 13400 13000 10800 10200 9870 8740 8280 8020

16300 12200 9240 7500

59000 43900 33400 27100

47900 35700 27100 22000

34400 25700 19500 15800

29600 22000 16700 13600

26200 19500 14800 12000

24800 18500 14000 11400

24000 17900 13600 11000

22700 16900 12900 10400

21300 20100 19500 15800 15000 14500 12000 11400 11000 9770 9250 8960

3000 8000 20000 40000

75500 56300 42700 34700

61300 45700 34700 28200

44100 32900 25000 20300

37900 28200 21400 17400

33500 25000 19000 15400

31700 23600 18000 14600

30700 22900 17400 14100

29100 21700 16500 13400

27200 20300 15400 12500

25800 25000 19200 18600 14600 14100 11800 11500

22322

3000 8000 20000 40000

93100 69400 52700 42800

75600 56400 42800 34800

54400 40500 30800 25000

46700 34800 26400 21500

41300 30800 23400 19000

39100 29100 22100 18000

37900 28200 21500 17400

35900 26700 20300 16500

33600 25000 19000 15400

31800 23700 18000 14600

22624

22324

3000 8000 20000 40000

106000 78600 59700 48500

85700 63900 48500 39400

61600 45900 34900 28300

52900 39400 29900 24300

46800 34900 26500 21500

44300 33000 25100 20400

43000 32000 24300 19700

40700 30300 23000 18700

38000 28300 21500 17500

36000 26800 20400 16600

22626

22326

3000 8000 20000 40000

122000 91000 69100 56100

99200 73900 56100 45600

71300 53100 40400 32800

61200 45600 34600 28100

54200 40400 30700 24900

51300 38200 29000 23600

49700 37000 28100 22800

47100 35100 26600 21600

44000 32800 24900 20200

22628

22328

3000 8000 20000 40000

142000 116000 106000 86100 80500 65400 65400 53100

83100 61900 47000 38200

71300 53100 40400 32800

63100 47000 35700 29000

59800 44500 33800 27500

57900 43100 32800 26600

54800 40900 31000 25200

51300 38200 29000 23600

22630

22330

3000 8000 20000 40000

160000 130000 119000 97000 90800 73700 73700 59900

93700 69800 53000 43100

80400 59900 45500 36900

71200 53000 40300 32700

67400 50200 38100 31000

65300 48600 36900 30000

61800 46100 35000 28400

22632

22332

3000 8000 20000 40000

173000 141000 101000 129000 105000 75400 98100 79700 57300 79700 64700 46500

86900 64700 49200 39900

76900 57300 43500 35400

72800 54200 41200 33500

70500 52600 39900 32400

66800 49800 37800 30700

22634

22334

3000 8000 20000 40000

178000 145000 104000 133000 108000 77700 101000 82000 59000 82000 66600 47900

89400 66600 50600 41100

79200 59000 44800 36400

75000 55900 42400 34500

72700 54100 41100 33400

68800 51200 38900 31600

30800 22900 17400 14200

Operation in the high speed shaded areas may require oil lubrication.

E-14


P-LB6800R, P-LB6800FR, P-LB6600FR Triple-Ring R Seal (P-LB6800 R) Three-point sealing with metal seal ring D5 Pentac®Seal (P-LB6800 D5) Five-point sealing with Kevlar® body lip seal plus metal seal ring

D8 Taconite seal (P-LB6800 D8) Auxillary purgeable grease chamber between outside metal and inside lip seal Fixed

Expansion

Dimensions (inches/mm) V Shaft diameter mm

40

inches 1⁷⁄₁₆ P-LB6823R 1¹⁄₂ P-LB6824R P-LB68M40R

2¹⁄₄

1¹⁵⁄₁₆ 2

P-LB6831R P-LB6832R P-LB68M50R

22211LBK

2³⁄₁₆

P-LB6835R P-LB68M60R

22213LBK

2⁷⁄₁₆

P-LB6839R P-LB6839FR P-LB68M65R P-LB68M65FR

22215LBK


22216LBK

60

65 2¹¹⁄₁₆ 70 2¹⁵⁄₁₆ 3

75 3³⁄₁₆ 80 3⁷⁄₁₆

P-LB6847R P-LB6847FR P-LB6848R P-LB6848FR P-LB68M75FR P-LB68M75FR

22217LBK


22218LBK

3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4

P-LB6859FR P-LB6863FR P-LB6864FR P-LB68M100FR

22222LBK

4³⁄₁₆

P-LB6867FR P-LB68M110FR

22224LBK

4⁷⁄₁₆ 4¹⁄₂

P-LB6871FR P-LB6872FR P-LB68M115FR

22226LBK

4¹⁵⁄₁₆ 5


100 110

115


7

min. 6¹⁄₄

C 8¹⁄₄

E 2³⁄₈

F Bolts ¹⁄₂

G ....

H

K

K k

¹³⁄₁₆

3⁵⁄₈

4³⁄₈

L 4³⁄₈

T K 1¹⁄₁₆

P I 6¹⁄₄

57.15

177.8

158.8

209.6 60.3

12

....

20.6

92.1

111.1 111.1

27.0

158.8

2¹⁄₂

7

6¹⁄₂

8¹⁄₄

¹⁄₂

....

¹⁵⁄₁₆

3⁵⁄₈

4³⁄₈

1¹⁄₈

6⁵⁄₈

2³⁄₈

4³⁄₄

Unit wt. (lbs./kgs.) 11 11 5.0 12 12

63.50

177.8

165.1

209.6 60.3

12

....

23.8

92.1

111.1 120.6

28.6

168.3

2³⁄₄

7⁷⁄₈

7³⁄₈

9⁵⁄₈

2³⁄₄

⁵⁄₈

....

¹⁵⁄₁₆

3⁷⁄₈

4¹³⁄₁₆

1³⁄₁₆

7¹⁄₄

69.85

200.0

187.3

244.5

69.8

16

....

23.8

98.4

122.2 133.4

30.2

184.2

3 76.20

9¹⁄₂ 241.3

8¹⁄₈ 206.4

11 279.4

3¹⁄₄ 82.6

⁵⁄₈ 16

.... ....

1 25.4

4³⁄₈ 111.1

5¹⁄₁₆ 5¹⁵⁄₁₆ 128.6 150.8

1¹³⁄₃₂ 35.7

8¹⁄₄ 209.6

22

3¹⁄₈

⁵⁄₈ ¹⁄₂ 16 12

.... 1⁷⁄₈ .... 47.6

1¹⁄₈

4³⁄₄

5⁴¹⁄₆₄

1¹⁵⁄₃₂

8³⁄₈

27

28.6

120.6 143.3 161.9

37.3

212.7

³⁄₄ ⁵⁄₈ 20 16

.... 2 .... 50.8

³⁄₄ ⁵⁄₈ ³⁄₄ ⁵⁄₈ 20 16

.... 2 .... 2 .... 50.8

³⁄₄ ⁵⁄₈ 20 16

.... 2¹⁄₈ .... 54.0

4³⁄₈ 4¹⁄₂ 4³⁄₈ 4¹⁄₂ 111.1 114.3

⁷⁄₈ ³⁄₄ ⁷⁄₈ ³⁄₄ 24 20

.... 2³⁄₈ .... 2³⁄₈ .... 60.3

4³⁄₄

³⁄₄

3¹⁄₄

9⁵⁄₈

8⁵⁄₈

11¹⁄₄

82.55

244.5

219.1

285.8 79.4

3¹⁄₂

11

9⁵⁄₈

13

88.90

279.4

244.5

330.2 88.9

3¹⁄₂

3³⁄₄

11

9⁷⁄₈

13

95.25

279.4

250.8

330.2 88.9

11³⁄₄ 11⁵⁄₈ 298.4 101.60 295.3

10¹⁄₄ 10³⁄₈ 260.4 263.5

13³⁄₄

4

22220LBK

90

B max.

22210LBK

P-LB6855R P-LB6855FR P-LB6856R P-LB6856FR P-LB68M90R P-LB68M90FR

3¹⁄₂

A

22209LBK

P-LB6827R P-LB6828R P-LB68M45R

50

E-15

Bearing number

1¹¹⁄₁₆ 1³⁄₄ 45

125

Pillow block number

4¹⁄₂

13¹⁄₈

3¹⁄₂

3⁷⁄₈

349.2 98.4

6¹¹⁄₆₄

5¹⁄₄

6³⁄₈

1¹⁄₄

5¹⁄₄

1¹⁄₂

9¹⁄₂

31.8

133.4 156.8 177.8

7

38.1

241.3

1¹⁄₄

5

5⁵¹⁄₆₄

1¹⁹⁄₃₂

10

31.8

127.0

147.2 185.7

40.5

254.0

7¹⁄₆₄

7⁵⁄₁₆

1⁵⁄₁₆

5⁷⁄₈

1³⁄₄

10¹⁄₂

33.3

149.2 178.2 201.6

44.4

266.7

1¹⁄₂

6

1²⁹⁄₃₂

11³⁄₄

38.1

152.4 176.6 225.4

48.4

298.4

2³⁄₄

1⁵⁄₈

6¹⁄₂

2¹⁄₈

10.0

12.2

38 17.2

42 19.0

47 21.3

15¹⁄₄

114.30 333.4

295.3

387.4

4¹⁵⁄₁₆

12⁵⁄₈

16¹⁄₂

125.41 368.3

320.7

419.1 120.6

20

69.8

41.3

165.1 191.7 244.5

54.0

88 12¹⁄₄ 87 311.2

5¹⁄₄ 14¹⁄₂ 133.35 368.3

13¹⁄₄ 336.6

16¹⁄₂ 4³⁄₄ 419.1 120.6

³⁄₄ 20

2³⁄₄ 69.8

1³⁄₄ 44.4

7¹⁄₈ 8³⁄₁₆ 10⁷⁄₁₆ 181.0 208.0 265.1

2⁹⁄₃₂ 57.9

13¹⁄₂ 342.9

104

6

14⁵⁄₈

18³⁄₈

⁷⁄₈

3¹⁄₄

1⁷⁄₈

7³⁄₄

11¹¹⁄₃₂

2¹⁵⁄₃₂

14¹⁄₂

149

371.5

466.7 130.2

24

82.6

47.6

196.8 224.2 288.1

62.7

368.3

16

20¹⁄₈

5⁷⁄₈

1

3³⁄₈

1¹⁵⁄₁₆

7³⁄₄

2⁵⁄₈

15¹⁄₂

406.4

511.2

149.2

24

85.7

49.2

196.8 220.7 300.0

66.7

393.7

16

152.40 406.4 6

17¹⁄₈

5¹⁄₈

7³⁵⁄₆₄

8⁵³⁄₆₄

8³⁹⁄₆₄

8⁷⁄₈

6.4

11⁵⁄₈

14¹⁄₂

6⁶¹⁄₆₄

7¹⁵⁄₁₆

5.4 14 14

9⁵⁄₈

11¹³⁄₁₆

71 30.8

87 39.5 47.2

63.5 167

22228LBK 152.40 435.0

71.2

Fixed

Expansion

Dimensions (inches/mm) - continued V Shaft diameter

Pillow block number

Bearing number

A

5³⁄₁₆


22230LBK

5⁷⁄₁₆ 140


22232LBK

22234LBK

150

5¹⁵⁄₁₆ P-LB6895FR 6 P-LB6896FR P-LB68M150FR

mm

F Bolts

G

H

17 21¹⁄₄ 431.8 539.8

6¹⁄₄ 158.8

1 24

3³⁄₄ 95.2

2 50.8

8¹⁄₈ 9 ¹⁷⁄₆₄ 12⁹⁄₁₆ 206.4 235.4 319.1

2³⁄₄ 69.8

16 187 406.4 84.8

17³⁄₈ 22 441.3 558.8

6¹⁄₄ 158.8

1 24

3³⁄₄ 95.2

2 50.8

8¹⁄₂ 215.9

9³⁵⁄₆₄ 13³⁄₈ 242.5 339.7

2³¹⁄₃₂ 75.4

17 221 431.8 94.8

2¹⁄₈

9¹⁄₄

10⁵⁄₁₆ 14¹⁄₄

3¹⁄₈

235.0

261.9 362.0 79.4

6⁵⁄₁₆ 160.34

18¹⁄₄ 463.6

6¹¹⁄₁₆ 169.86

19¹⁄₄ 489.0

C

6⁷⁄₁₆ 6¹⁄₂

22236LBK

160


22238LBK

170

6¹⁵⁄₁₆ P-LB68111FR 7 P-LB68112FR P-LB68M170FR 7³⁄₁₆

180


22240LBK

22244LBK

200

7¹⁄₂ P-LB68120FR 7¹⁵⁄₁₆ P-LB68127FR 8 P-LB68128FR P-LB68M200FR 8⁷⁄₁₆ 8¹⁄₂ 9

220 9⁷⁄₁₆ 9¹⁄₂ 9¹⁵⁄₁₆ 10 10⁷⁄₁₆ 10¹⁄₂

P-LB66135FR P-LB66136FR P-LB66144FR P-LB66M220FR P-LB66B151FR P-LB66B152FR P-LB66159FR P-LB66160FR P-LB66167FR P-LB66168FR P-LB66M260FR

23048LBK

7¹⁄₁₆

21⁵⁄₈

19³⁄₈

6³⁄₄

1

4¹⁄₄

179.39

549.3

492.1 628.6

24³⁄₄

171.4

24

108.0 54.0

7¹⁄₈

1

4⁵⁄₈

181.0

24

117.5 54.0

7¹⁄₂

23⁵⁄₈

20⁷⁄₈

190.50

600.1

530.2 679.4

26³⁄₄

28

2¹⁄₈

L

T K

P I

18 457.2

9⁵⁄₈

10¹¹⁄₁₆ 14¹⁵⁄₁₆ 3⁵⁄₃₂

18³⁄₄

244.5

271.5 379.4

476.2

10¹⁄₄

11³⁄₁₆ 15¹³⁄₁₆ 3⁵⁄₁₆

80.2

280 119.8 304 137.9

7⁷⁄₈

24³⁄₈

21⁵⁄₈

7¹⁄₂

1¹⁄₄

4¹⁄₂

619.1

549.3 711.2

190.5

30

114.3 60.3

260.4 284.2 401.6

84.1

520.7

8¹⁄₄ 209.55

25 635.0

22¹⁄₂ 29¹⁄₂ 571.5 749.3

8 203.2

1¹⁄₄ 30

5 2³⁄₈ 127.0 60.3

11 279.4

11⁷⁄₈ 16³⁄₄ 301.6 425.4

3¹⁸⁄₃₂ 89.7

22¹⁄₄ 450 565.2 204.1

9¹⁄₂

27⁷⁄₈

24³⁄₄

8³⁄₄

1¹⁄₂

5¹⁄₄

11³⁄₁₆

12⁵⁄₁₆ 18⁹⁄₁₆

3¹³⁄₁₆

241.30

708.0

628.6 831.8

222.2

36

133.4 69.8

284.2 312.7 471.5

96.8

675 665 665 622.3 301.6

8¹⁄₄

25

22¹⁄₂

8

1¹⁄₄

5

11

12⁵⁄₁₆ 16³⁄₄

3¹³⁄₁₆

22¹⁄₄

209.55

635.0

571.5 749.3

203.2

30

127.0 60.3

279.4

312.7 425.4

96.8

565.2

29¹⁄₂

9¹⁄₂

27⁷⁄₈

24³⁄₄

32³⁄₄

241.30

708.0

628.6 831.8

2³⁄₄

2³⁄₈

8³⁄₄

1¹⁄₂

5¹⁄₄

2³⁄₄

222.2

36

133.4 69.8

23056LBK

20¹⁄₂

Unit wt. (lbs./kgs.)

200.02

32³⁄₄

2³⁄₈

K

K k

E

min.

inches

135

260

B max.

370 167.8

24¹⁄₂

430 195.0

550 545 11³⁄₄ 13¹⁄₁₆ 19¹⁄₁₆ 4¹⁄₄ 24¹⁄₂ 540 530 515 510 298.4 331.8 484.2 108.0 622.3 247.2

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: for 4¹⁄₂" (115 mm) and smaller shafts, ¹⁄₈" PT; for all other shafts ¹⁄₄" PT. * Expansion type block provides ¹⁄₄" (6.4 mm) total axial movement for 1³⁄₄" (40 mm) and smaller shafts. All larger sizes provide ³⁄₈" (9.5 mm). Fixed bearing is offset in relation to housing centerline. ** Drain plug tap size: for 3³⁄₁₆" (80 mm) and smaller shafts, ¹⁄₈" PT; for 3⁷⁄₁₆" (90 mm) through 6" (150 mm) shafts, ¹⁄₄" PT; for all other shafts, ¹⁄₂" PT. L Recommended dimension from bearing centerline to shaft face for closed end unit. Minimum Extension of shaft beyond locknut, .06 inch. V Recommended dimension for cap removal Selection guide, pages E-7, E-8. Load ratings, pages E-9 through E-12. Additional information, page E-34. m Width for D5 Pentac™ 5 point sealing system.

E-16


P-LB6800D8, P-LB6800FD8, P-LB6600FD8 Two-piece Cast Iron Housing 2 or 4-bolt Base Independently Flushable Seals Self-aligning Tapered Adapter Mounted Grease Lubrication

Dimensions (inches/mm) V Shaft diameter G 1⁷⁄₁₆ 1¹⁄₂

Pillow block number P-LB6823D8 P-LB6824D8

1¹¹⁄₁₆

P-LB6827D8

1¹⁵⁄₁₆ 2

P-LB6831D8 P-LB6832D8

2³⁄₁₆

P-LB6835D8

Bearing number

C

E

F Bolts

G

H

K

L

T K

P I

J


7 177.8

6¹⁄₄ 158.8

8¹⁄₄ 209.6

2³⁄₈ 60.3

¹⁄₂ 12

.... ....

¹³⁄₁₆ 20.6

5 127.0

4³⁄₈ 111.1

1¹⁄₁₆ 27.0

6¹⁄₄ 158.8

4⁷⁄₁₆ 112.7

12

22210LBK

2¹⁄₂ 63.50

7 177.8

6¹⁄₂ 165.1

8¹⁄₄ 209.6

2³⁄₈ 60.3

¹⁄₂ 12

.... ....

¹⁵⁄₁₆ 23.8

4¹⁵⁄₁₆ 125.4

4³⁄₄ 120.6

1¹⁄₈ 28.6

6⁵⁄₈ 168.3

4¹³⁄₃₂ 111.9

13

22211LBK

2³⁄₄ 69.85

7⁷⁄₈ 200.0

7³⁄₈ 187.3

9⁵⁄₈ 244.5

2³⁄₄ 69.8

⁵⁄₈ 16

.... ....

¹⁵⁄₁₆ 23.8

5⁵⁄₁₆ 134.9

5¹⁄₄ 133.4

1³⁄₁₆ 30.2

7¹⁄₄ 184.2

4²³⁄₃₂ 119.8

16

22213LBK

3 76.20

9¹⁄₂ 241.3

8¹⁄₈ 206.4

11 279.4

3¹⁄₄ 82.6

⁵⁄₈ 16

.... ....

1 25.4

5⁵⁄₈ 142.9

5¹⁵⁄₁₆ 150.8

1¹³⁄₃₂ 35.7

8¹⁄₄ 209.6

5¹⁄₈ 130.2

24

⁵⁄₈ ¹⁄₂ 16 12

.... 1⁷⁄₈ .... 47.6

30

³⁄₄ ⁵⁄₈ 20

.... 2 ....

³⁄₄ ⁵⁄₈ ³⁄₄ ⁵⁄₈ 20

.... 2 .... 2 ....

³⁄₄ ⁵⁄₈ 20 16

.... 2¹⁄₈

2¹¹⁄₁₆

P-LB6843D8

22216LBK

2¹⁵⁄₁₆

22217LBK

3

P-LB6847D8 P-LB6847FD8 P-LB6848D8

3³⁄₁₆

P-LB6851D8 P-LB6851FD8

22218LBK

3¹¹⁄₁₆ 3¹⁵⁄₁₆

min.

2¹⁄₄ 57.15

22215LBK

3⁷⁄₁₆

max.

22209LBK


2⁷⁄₁₆

B

A

3¹⁄₄

9⁵⁄₈

8⁵⁄₈

11¹⁄₄

3¹⁄₈

82.55

244.5

219.1

285.8

79.4

3¹⁄₂ 88.90

11 279.4

9⁵⁄₈ 244.5

13 330.2

3¹⁄₂ 88.9

3³⁄₄

11

9⁷⁄₈

13

3¹⁄₂

95.25

279.4

250.8

330.2

88.9

11³⁄₄ 11⁵⁄₈ 298.4 101.60 295.3

10¹⁄₄ 10³⁄₈ 260.4 263.5

13³⁄₄

3⁷⁄₈

349.2

98.4

4

54.0

5.4 5.9 7.3 10.9

1¹⁄₈

5¹⁵⁄₁₆

6³⁄₈

1¹⁵⁄₃₂

8³⁄₈

5¹⁷⁄₃₂

28.6

150.9

161.9

37.3

212.7

140.5

1¹⁄₄ 31.8

6⁹⁄₁₆ 166.7

7 177.8

1¹⁄₂ 38.1

9¹⁄₂ 241.3

6¹⁄₃₂ 153.2

42

1¹⁄₄

6³⁄₈

7⁵⁄₁₆

1¹⁹⁄₃₂

10

5¹¹⁄₁₆

47

31.8

161.9

185.7

40.5

254.0

144.5

1⁵⁄₁₆

7³⁄₈

7¹⁵⁄₁₆

1³⁄₄

10¹⁄₂

6³⁄₄

33.3

187.3

201.6

44.4

266.7

171.4

13.6

19.1

21.3 52 23.6


22220LBK

4¹⁄₂ 13¹⁄₈ 114.30 333.4

11⁵⁄₈ 295.3

4³⁄₈ 15¹⁄₄ 4¹⁄₂ 387.4 111.1 114.3

⁷⁄₈ ³⁄₄ 24 20

.... 2³⁄₈ .... 60.3

1¹⁄₂ 38.1

7⁵⁄₁₆ 185.7

8⁷⁄₈ 225.4

1²⁹⁄₃₂ 48.4

11³⁄₄ 298.4

6²¹⁄₃₂ 169.1

79

P-LB6859FD8 P-LB6863FD8

22222LBK

4¹⁵⁄₁₆ 14¹⁄₂ 125.41 368.3

12⁵⁄₈ 320.7

16¹⁄₂ 4³⁄₄ 419.1 120.6

³⁄₄ 20

2³⁄₄ 69.8

1⁵⁄₈ 41.3

7¹⁵⁄₁₆ 201.6

9⁵⁄₈ 244.5

2¹⁄₈ 54.0

12¹⁄₄ 311.2

7⁷⁄₃₂ 183.4

98

13¹⁄₄ 336.6

16¹⁄₂ 4³⁄₄ 419.1 120.6

³⁄₄ 20

2³⁄₄ 69.8

1³⁄₄ 44.4

8⁹⁄₁₆ 217.5

10⁷⁄₁₆ 265.1

2⁹⁄₃₂ 57.9

13¹⁄₂ 342.9

7³¹⁄₃₂ 116 253.2 52.6

35.8

44.5

4³⁄₁₆

P-LB6867FD8

22224LBK

5¹⁄₄ 14¹⁄₂ 133.35 368.3

4⁷⁄₁₆

P-LB6871FD8

22226LBK

6 16 152.40 406.4

14⁵⁄₈ 371.5

18³⁄₈ 5¹⁄₈ 466.7 130.2

⁷⁄₈ 24

3¹⁄₄ 82.6

1⁷⁄₈ 47.6

9⁷⁄₃₂ 234.2

11¹⁹⁄₃₂ 294.5

2¹⁵⁄₃₂ 62.7

14¹⁄₂ 368.3

8³¹⁄₆₄ 165 215.5 74.8

4¹⁵⁄₁₆

P-LB6879FD8

22228LBK

6 17¹⁄₈ 152.40 435.0

16 406.4

20¹⁄₈ 5⁷⁄₈ 511.2 149.2

1 24

3³⁄₈ 85.7

1¹⁵⁄₁₆ 49.2

8¹⁵⁄₁₆ 227.0

11¹³⁄₁₆ 300.0

2⁵⁄₈ 66.7

15¹⁄₂ 393.7

8⁷⁄₃₂ 184 208.8 83.5


E-17

Dimensions (inches/mm) - continued V Shaft diameter G

Pillow block number

Bearing number

B

A max.

C

E

F Bolts

G

H

K

L

T K

P I

J


min.

5⁷⁄₁₆

P-LB6887FD8

22232LBK

6¹¹⁄₁₆ 19¹⁄₄ 169.86 489.0

17³⁄₈ 441.3

22 558.8

6¹⁄₄ 158.8

1 24

3³⁄₄ 95.2

2 50.8

9¹³⁄₁₆ 249.2

13³⁄₈ 339.7

2³¹⁄₃₂ 69.8

17 431.8

9⁵⁄₃₂ 232.6

244 110.7

5¹⁵⁄₁₆ 6


22234LBK

7¹⁄₁₆ 21⁵⁄₈ 179.39 549.3

19³⁄₈ 492.1

24³⁄₄ 628.6

6³⁄₄ 171.4

1 24

4¹⁄₄ 2¹⁄₈ 108.0 54.0

11 279.4

14¹⁄₄ 362.0

3¹⁄₈ 79.4

18 457.2

10¹⁄₈ 257.2

309 140.2

6⁷⁄₁₆ 6¹⁄₂


22236LBK

7¹⁄₂ 23⁵⁄₈ 190.50 600.1

20⁷⁄₈ 530.2

26³⁄₄ 679.4

7¹⁄₈ 181.0

1 24

4⁵⁄₈ 2¹⁄₈ 117.5 54.0

11³⁄₈ 14¹⁵⁄₁₆ 288.9 379.4

3⁵⁄₃₂ 80.2

18³⁄₄ 476.2

10¹¹⁄₁₆ 271.5

322 146.1

6¹⁵⁄₁₆ 7


22238LBK

7⁷⁄₈ 24³⁄₈ 200.02 619.1

21⁵⁄₈ 549.3

28 711.2

7¹⁄₂ 190.5

1¹⁄₄ 30

4¹⁄₂ 2³⁄₈ 114.3 60.3

12¹⁄₁₆ 15¹³⁄₁₆ 306.4 401.6

3⁵⁄₁₆ 84.1

20¹⁄₂ 520.7

11¹¹⁄₃₂ 288.1

411 186.4

7¹⁄₂ 7¹⁵⁄₁₆ 8

P-LB68120FD8 P-LB68127FD8 P-LB68128FD8

22244LBK

9¹⁄₂ 241.30

27⁷⁄₈ 708.0

24³⁄₄ 628.6

32³⁄₄ 831.8

8³⁄₄ 222.2

1¹⁄₂ 36

5¹⁄₄ 2³⁄₄ 133.4 69.8

13³⁄₁₆ 335.0

18⁹⁄₁₆ 471.5

3¹³⁄₁₆ 96.8

24¹⁄₂ 622.3

12³⁄₁₆ 309.6

750 340.2

8⁷⁄₁₆ 8¹⁄₂ 9

P-LB66135FD8 P-LB66136FD8 P-LB66144FD8

23048LBK

8¹⁄₄ 25 209.55 635.0

22¹⁄₂ 571.5

29¹⁄₂ 749.3

8 203.2

1¹⁄₄ 30

5 2³⁄₈ 127.0 60.3

12¹¹⁄₁₆ 16³⁄₄ 322.3 425.4

3¹³⁄₁₆ 96.8

22¹⁄₄ 565.2

12¹⁄₃₂ 305.6

478 216.8

9¹⁄₂ 10¹⁄₂

P-LB66B152FD8 P-LB66168FD8

23056LBK

9¹⁄₂ 241.30

24³⁄₄ 628.6

32³⁄₄ 831.8

8³⁄₄ 222.2

1¹⁄₂ 36

5¹⁄₄ 2³⁄₄ 133.4 69.8

14⁷⁄₁₆ 19¹⁄₁₆ 366.7 484.2

4¹⁄₄ 24¹⁄₂ 108.0 622.3

13⁹⁄₃₂ 337.3

605 274.4

27⁷⁄₈ 708.0

Bold face items are normally available from stock; please consult for availability of non-stock items. Seal assembly lubrication fitting tap size: 1³⁄₄" and smaller shafts, ¹⁄₄-28; all other ¹⁄₈" PT. G Recommended shaft finish under D8 lip seals, 10-20 micro inches, obtain by straight plunge grinding or polishing with fine (000) Emery leaving no spiraling marks. Not required for low speed shafts. g Cast steel housing is standard. Expansion type block provides ¹⁄₄" (6.4 mm) total axial movement for 1³⁄₄" (40 mm) and smaller shafts. All larger shafts, ³⁄₈" (9.5 mm). Fixed bearing is offset in relation to housing centerline. L See cross section, page E-15; footnote, page E-16. V Recommended dimension for cap removal ** Drain plug tap size: for 3³⁄₁₆" (80 mm) and smaller shafts, ¹⁄₈" PT; for 3⁷⁄₁₆" (90 mm) through 6" (150 mm) shafts, ¹⁄₄" PT; for all other shafts, ¹⁄₂" PT. Selection guide, pages E-7, E-8. Load ratings, pages E-9 through E-12. Additional information, page E-34.

E-18


PK-LB6800FR, PK-LB6600FR Two-piece Cast Steel Housing 4-bolt Base Fixed or Expansion Self-aligning Tapered Adapter Mounted Grease or Oil Lubrication

Dimensions (inches/mm) V Shaft diameter mm 65 70


C

E

F Bolts

G

H

K

L

T K

P I


8⁵⁄₈ 219.1

11¹⁄₄ 285.8

4³⁄₈ 111.1

¹⁄₂ 12

1⁷⁄₈ 47.6

1¹⁄₂ 38.1

4³⁄₄ 6³⁄₈ 1¹⁵⁄₃₂ 120.6 161.9 37.3

10¹⁄₄ 260.4

37

2¹¹⁄₁₆

PK-LB6843FR PK-LB68M70FR

22216LBK

3¹⁄₂ 88.90

11 279.4

9⁵⁄₈ 244.5

13 330.2

4⁷⁄₈ 123.8

⁵⁄₈ 16

2 50.8

1⁵⁄₈ 41.3

5¹⁄₄ 7 133.4 177.8

1¹⁄₂ 38.1

11 279.4

51

2¹⁵⁄₁₆ 3

PK-LB6847FR PK-LB6848FR PK-LB68M75FR

22217LBK

3³⁄₄ 95.25

11 279.4

9⁷⁄₈ 250.8

13 330.2

4⁷⁄₈ 123.8

⁵⁄₈ 16

2 50.8

1⁵⁄₈ 41.3

5¹⁄₄ 7³⁄₈ 1¹⁹⁄₃₂ 133.4 187.3 40.5

11¹⁄₂ 292.1

51

3⁷⁄₁₆ 3¹⁄₂


22220LBK

4¹⁄₂ 13¹⁄₈ 114.30 333.4

11⁵⁄₈ 295.3

15¹⁄₄ 387.4

6 152.4

³⁄₄ 20

2³⁄₈ 60.3

1⁷⁄₈ 47.6

6¹⁄₂ 8¹³⁄₁₆ 1²⁹⁄₃₂ 165.1 223.8 48.4

13³⁄₄ 349.2

97

3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4

PK-LB6859FR PK-LB6863FR PK-LB6864FR PK-LB68M100FR

22222LBK

4¹⁵⁄₁₆

12⁵⁄₈

16¹⁄₂

6¹⁄₂

³⁄₄

2³⁄₄

2

7

9³⁄₄

2¹⁄₈

15¹⁄₄

125.41 368.3

320.7

419.1

165.1

20

69.8

50.8

177.8

247.6

54.0

387.4

50.8

4⁷⁄₁₆ 4¹⁄₂


22226LBK

6 16 152.40 406.4

14⁵⁄₈ 371.5

18³⁄₈ 466.7

7¹⁄₄ 184.2

⁷⁄₈ 24

3¹⁄₄ 82.6

2¹⁄₄ 57.2

7³⁄₄ 11¹⁄₂ 2¹⁵⁄₃₂ 196.8 292.1 62.7

200 18¹⁄₄ 196 463.6

88.9

4¹⁵⁄₁₆ 5


22228LBK

6 17¹⁄₈ 152.40 435.0

16 406.4

20¹⁄₈ 511.2

6⁷⁄₈ 174.6

1 24

3³⁄₈ 85.7

2¹⁄₂ 63.5

7¹⁄₂ 11¹⁵⁄₁₆ 2⁵⁄₈ 190.5 303.2 66.7

19¹⁄₄ 207 489.0

93.9

5⁷⁄₁₆


22232LBK

6¹¹⁄₁₆ 19¹⁄₄ 169.86 489.0

17³⁄₈ 441.3

22 558.8

8 203.2

1 24

3³⁄₄ 95.2

2³⁄₄ 69.8

8¹⁄₂ 13¹⁄₂ 2³¹⁄₃₂ 215.9 342.9 75.4

20¹⁄₂ 270 520.7 122.5

5¹⁵⁄₁₆ 6


22234LBK

7¹⁄₁₆ 21⁵⁄₈ 179.39 549.3

19³⁄₈ 492.1

24³⁄₄ 628.6

8³⁄₄ 222.2

1 24

4¹⁄₄ 3 108.0 76.2

9¹⁄₄ 14¹⁄₄ 3¹⁄₈ 235.0 362.0 79.4

22¹⁄₄ 368 565.2 166.9

6⁷⁄₁₆ 6¹⁄₂


22236LBK

7¹⁄₂ 23⁵⁄₈ 190.50 600.1

20⁷⁄₈ 530.2

26³⁄₄ 679.4

9¹⁄₈ 231.8

1 24

4⁵⁄₈ 3¹⁄₄ 117.5 82.6

9⁵⁄₈ 14¹⁵⁄₁₆ 3⁵⁄₃₂ 244.5 379.4 80.2

23¹⁄₄ 390 590.6 176.9

6¹⁵⁄₁₆ 7


22238LBK

7⁷⁄₈ 24³⁄₈ 200.02 619.1

21⁵⁄₈ 549.3

28 711.2

9³⁄₄ 247.6

1¹⁄₄ 30

4¹⁄₂ 3¹⁄₄ 114.3 82.6

10¹⁄₄ 15¹³⁄₁₆ 3⁵⁄₁₆ 260.4 401.6 84.1

25 470 635.0 213.2

7¹⁄₂ 7¹⁵⁄₁₆ 8

PK-LB68120FR PK-LB68127FR PK-LB68128FR PK-LB68M200FR

22244LBK

9¹⁄₂

25⁷⁄₈

32

12

1³⁄₄

7¹⁄₄

12⁵⁄₈

29¹⁄₄

241.30 701.7

657.2

812.8

304.8

48

184.2 101.6 320.7 474.7 96.8

743.0

8¹⁄₂ 9


8¹⁄₄

22¹⁄₂

29¹⁄₂

10³⁄₈

1¹⁄₄

5

26¹⁄₂

571.5

749.3

263.5

30

127.0 88.9

9¹⁄₂ 9¹⁵⁄₁₆ 10 10¹⁄₂

PK-LB66B152FR PK-LB66159FR PK-LB66160FR PK-LB66168FR PK-LB66M260FR

170

200

220

260

min.

9⁵⁄₈ 244.5

150

160

B max.

3¹⁄₄ 82.55

125 140

A

22215LBK

100

115

Bearing number


75

90

Pillow block number

23048LBK

14¹⁄₂

27⁵⁄₈ 25

209.55 635.0 9¹⁄₂

27⁵⁄₈

4 3¹⁄₂

4

11

18¹¹⁄₁₆ 3¹³⁄₁₆ 16¹⁄₂

3¹³⁄₁₆

279.4 419.1 96.8

25⁷⁄₈

32

12

1³⁄₄

7¹⁄₄

12⁵⁄₈

18¹¹⁄₁₆ 4¹⁄₄

657.2

812.8

304.8

48

184.2 101.6 320.7 474.7 108.0

29¹⁄₄

241.30 701.7

743.0

23.1

23.1

44.0 112

875 830 830 376.5 562 528

673.1

23056LBK

16.8

240.4 800 790 780 770 358.3

Bold face items are normally available from stock; please consult for availability of non-stock items. Lubrication fitting tap size: ¹⁄₄" PT. * Expansion type block provides ¹⁄₄" (6.4 mm) total axial movement for 1³⁄₄" (40 mm) and smaller shafts. All larger shafts, ³⁄₈" (9.5 mm). Fixed bearing is offset in relation to housing centerline. **Drain plug tap size: for 6" (160 mm) and smaller shafts, ¹⁄₄" PT; for all other shafts, ¹⁄₂" PT.

E-19

L

Recommended dimension from bearing centerline to shaft face for closed end unit. Minimum Extension of shaft beyond locknut, .06 inch. V Recommended dimension for cap removal Selection guide, pages E-7, E-8. Load ratings, pages E-9 through E-12. Additional information, page E-34.


PK-LB6800FD8, PK-LB6600FD8 Two-piece Cast Steel Housing 4-bolt Base Independently Flushable Seals Self-aligning Tapered Adapter Mounted Grease Lubrication

Dimensions (inches/mm) V Shaft diameter G

Pillow block number

2⁷⁄₁₆

PK-LB6839FD8

2¹⁵⁄₁₆ 3

PK-LB6847FD8 PK-LB6848FD8

4⁷⁄₁₆

PK-LB6871FD8

Bearing number

B

A max.

min.

C

E

F Bolts

G

H

K

L

T K

P I

J


22215LBK

3¹⁄₄ 82.55

9⁵⁄₈ 244.5

8⁵⁄₈ 219.1

11¹⁄₄ 285.8

4³⁄₈ 111.1

¹⁄₂ 12

1⁷⁄₈ 47.6

1¹⁄₂ 38.1

6¹⁄₁₆ 154.0

6³⁄₈ 161.9

1¹⁵⁄₃₂ 37.3

10¹⁄₄ 260.4

5¹⁷⁄₃₂ 140.5

41

22217LBK

3³⁄₄ 95.25

11 279.4

9⁷⁄₈ 250.8

13 330.2

4⁷⁄₈ 123.8

⁵⁄₈ 16

2 50.8

1⁵⁄₈ 41.3

6⁵⁄₈ 168.3

7³⁄₈ 187.3

1¹⁹⁄₃₂ 40.5

11¹⁄₂ 292.1

6¹⁄₁₆ 154.0

57

22226LBK

6 152.40

16 406.4

14⁵⁄₈ 371.5

18³⁄₈ 466.7

7¹⁄₄ 184.2

⁷⁄₈ 24

3¹⁄₄ 82.6

2¹⁄₄ 57.2

9¹⁄₄ 235.0

11¹⁄₂ 292.1

2¹⁵⁄₃₂ 62.7

18¹⁄₄ 363.6

8⁵⁄₈ 219.1

222

17¹⁄₈ 435.0

16 406.4

20¹⁄₈ 511.2

6⁷⁄₈ 174.6

1 24

3³⁄₈ 85.7

2¹⁄₂ 63.5

9 228.6

11¹⁵⁄₁₆ 303.2

2⁵⁄₈ 66.7

19¹⁄₄ 489.0

8³⁄₈ 212.7

230 104.3

23⁵⁄₈ 600.1

20⁷⁄₈ 530.2

26³⁄₄ 679.4

9¹⁄₈ 231.8

1 24

4⁵⁄₈ 3¹⁄₄ 117.5 82.6

11³⁄₈ 288.9

14¹⁵⁄₁₆ 379.4

3⁵⁄₃₂ 80.2

23¹⁄₄ 590.6

10¹¹⁄₁₆ 261.9

433 196.4

4¹⁵⁄₁₆

PK-LB6879FD8

22228LBK

6 152.40

6⁷⁄₁₆

PK-LB68103FD8

22236LBK

7¹⁄₂ 190.50

18.6 25.9 100.7

Please consult for availability. Seal assembly lubrication fitting tap size: ¹⁄₈" PT. G Recommended shaft finish under D8 lip seals, 10-20 micro inches, obtain by straight plunge grinding or polishing with fine (000) Emery leaving no spiraling marks. Not required for low speed shafts. Expansion type block provides ³⁄₈" (9.5 mm) total axial movement. Fixed bearing is offset in relation to housing centerline (see cross-sections, page E-19). K See cross section and footnote, page E-19. V Recommended dimension for cap removal. ** Drain plug tap size: for 6" and smaller shafts, ¹⁄₄" PT; for all other shafts, ¹⁄₂" PT. Selection guide, pages E-7, E-8. Load ratings, pages E-9 through E-12. Additional information, page E-34.

E-20


P-LB7800R, P-LB7800FR, P-LB7600FR Two-piece Cast Iron Housing 2 or 4-bolt Base Fixed or Expansion Self-aligning Direct Shaft Mounted Grease or Oil Lubrication

Fixed

Expansion

Dimensions (inches/mm) Bearing bore diameter

Shaft diameter V1

V2

2.9528 75.000

3⁷⁄₁₆

2¹³⁄₁₆

3.1496 80.000

3⁵⁄₈

3.3465 85.000

3¹⁵⁄₁₆

3.5433 90.000

4¹⁄₈

3.9370 100.000

4¹⁄₂

4.3307 110.000

4⁷⁄₈

4.7244 120.000 5.1181 130.000 5.5118 140.000 5.9055 150.000 6.2992 160.000 6.6929 170.000

5⁵⁄₁₆ 5⁷⁄₈ 6¹⁄₄ 6⁵⁄₈ 7 7⁷⁄₁₆

3

3³⁄₁₆

3³⁄₈

3¹³⁄₁₆

4³⁄₁₆ 4⁹⁄₁₆ 4¹⁵⁄₁₆ 5⁵⁄₁₆ 5³⁄₄ 6¹⁄₁₆ 6⁷⁄₁₆

Pillow block number

Bearing number

H

3¹⁄₈

K k

L

T K

P I

⁵⁄₈ ¹⁄₂ 16 12

.... 1⁷⁄₈ .... 47.6

1¹⁄₈

4³⁄₄

6³⁄₈

1¹⁵⁄₃₂

8³⁄₈

28.6

120.6 161.9 37.3

212.7

³⁄₄ ⁵⁄₈ 20 16

.... 2 .... 50.8

1¹⁄₄

5¹⁄₄

9¹⁄₂

31.8

133.4 177.8 38.1

241.3

³⁄₄ ⁵⁄₈ 20 16

.... 2 .... 50.8

1¹⁄₄

5

7⁵⁄₁₆

10

31.8

127.0

185.7 40.5

254.0

³⁄₄ ⁵⁄₈ 20 16

.... 2¹⁄₈ .... 54.0

1⁵⁄₁₆

5⁷⁄₈

7¹⁵⁄₁₆

10¹⁄₂

33.3

149.2 201.6 44.4

266.7

4³⁄₈ 4¹⁄₂ 111.1 114.3

⁷⁄₈ ³⁄₄ 24 20

.... 2³⁄₈ .... 60.3

1¹⁄₂

6

11³⁄₄

38.1

152.4 225.4 48.4

298.4


219.1 285.8 79.4

3¹⁄₂

11

9⁵⁄₈

13

88.90

279.4

244.5

330.2 88.9

3³⁄₄

11

9⁷⁄₈

13

95.25

279.4

250.8 330.2 88.9

4

11⁵⁄₈

10³⁄₈

101.60

295.3

263.5 349.2 98.4

4¹⁄₂

13¹⁄₈

11⁵⁄₈

114.30

333.4

295.1 387.4

22222LB

4¹⁵⁄₁₆ 125.41

14¹⁄₂ 368.3

12⁵⁄₈ 16¹⁄₂ 4³⁄₄ 320.7 419.1 120.6

³⁄₄ 20

2³⁄₄ 69.8

1⁵⁄₈ 41.3

6¹⁄₂ 9⁵⁄₈ 2¹⁄₈ 165.1 222.5 54.0

12¹⁄₄ 311.2

78

22224LB

5¹⁄₄ 133.35

14¹⁄₂ 368.3

13¹⁄₄ 16¹⁄₂ 4³⁄₄ 336.6 419.1 120.6

³⁄₄ 20

2³⁄₄ 69.8

1³⁄₄ 44.4

7¹⁄₈ 10⁷⁄₁₆ 2⁹⁄₃₂ 181.0 265.1 57.9

13¹⁄₂ 342.9

102

22226LB

6 152.40

16 406.4

14⁵⁄₈ 371.5

⁷⁄₈ 24

3¹⁄₄ 82.6

1⁷⁄₈ 47.6

7³⁄₄ 11¹⁹⁄₃₂ 2¹⁵⁄₃₂ 196.8 294.5 62.7

14¹⁄₂ 368.3

141

22228LB

6 152.40

17¹⁄₈ 435.0

16 20¹⁄₈ 406.4 511.2

5⁷⁄₈ 149.2

1 24

3³⁄₈ 85.7

1¹⁵⁄₁₆ 49.2

7³⁄₄ 11¹³⁄₁₆ 2⁵⁄₈ 196.8 300.0 66.7

15¹⁄₂ 393.7

162

22230LB

6⁵⁄₁₆ 160.34

18¹⁄₄ 463.6

17 431.8

21¹⁄₄ 6¹⁄₄ 539.8 158.8

1 24

3³⁄₄ 95.2

2 50.8

8¹⁄₈ 12⁹⁄₁₆ 2³⁄₄ 206.4 319.1 69.8

16 406.4

182

22232LB

6¹¹⁄₁₆ 169.86

19¹⁄₄ 489.0

17³⁄₈ 441.3

22 6¹⁄₄ 558.8 158.8

1 24

3³⁄₄ 95.2

2 50.8

8¹⁄₂ 13³⁄₈ 2³¹⁄₃₂ 215.9 339.7 75.4

17 431.8

202

22234LB

7¹⁄₁₆ 179.39

21⁵⁄₈ 549.3

19³⁄₈ 492.1

24³⁄₄ 6³⁄₄ 628.6 171.4

1 24

4¹⁄₄ 108.0

2¹⁄₈ 54.0

9¹⁄₄ 14¹⁄₄ 3¹⁄₈ 235.0 362.0 79.4

18 457.2

240

23⁵⁄₈ 600.1

20⁷⁄₈ 26³⁄₄ 530.2 679.4

7¹⁄₈ 181.0

1 24

4⁵⁄₈ 117.5

2¹⁄₈ 54.0

9⁵⁄₈ 244.5

14¹⁵⁄₁₆ 3⁵⁄₃₂ 379.4 80.2

18³⁄₄ 476.2

279 126.6

22217LB

P-LB7890R P-LB7890FR

22218LB


22220LB

P-LB78110FR

P-LB78170FR

G

244.5


P-LB78160FR

11¹⁄₄

F Bolts

82.55

22216LB

P-LB78150FR

E

8⁵⁄₈


P-LB78140FR

C min.

9⁵⁄₈

22215LB

P-LB78130FR

max. 3¹⁄₄


P-LB78120FR

B

A

13³⁄₄

15¹⁄₄

3¹⁄₂

3¹⁄₂

3⁷⁄₈

18³⁄₈ 5¹⁄₈ 466.7 130.2

7

8⁷⁄₈

1¹⁄₂

1¹⁹⁄₃₂

1³⁄₄

1²⁹⁄₃₂

35 15.9 35 15.9 40 18.1 42 19.1 62 28.1

35.4 46.3 64.0 73.5 82.6 91.6 108.9

7.0866 180.000

7¹³⁄₁₆

6⁷⁄₈

P-LB78180FR

22236LB

7¹⁄₂ 190.50

7.4803 190.000

8³⁄₈

7¹⁄₄

P-LB78190FR

22238LB

7⁷⁄₈ 200.02

24³⁄₈ 619.1

21⁵⁄₈ 28 549.3 711.2

7¹⁄₂ 190.5

1¹⁄₄ 30

4¹⁄₂ 114.3

2³⁄₈ 60.3

10¹⁄₄ 15¹³⁄₁₆ 3⁵⁄₁₆ 260.4 401.6 84.1

20¹⁄₂ 520.7

345

22240LB

8¹⁄₄ 209.55

25 635.0

22¹⁄₂ 571.5

29¹⁄₂ 749.3

8 203.2

1¹⁄₄ 30

5 127.0

2³⁄₈ 60.3

11 279.4

16³⁄₄ 3¹⁷⁄₃₂ 425.4 89.7

22¹⁄₄ 565.2

415

22244LB

9¹⁄₂ 241.30

27⁷⁄₈ 708.0

24³⁄₄ 32³⁄₄ 628.6 831.8

8³⁄₄ 222.2

1¹⁄₂ 36

5¹⁄₄ 133.4

2³⁄₄ 69.8

11³⁄₁₆ 18⁹⁄₁₆ 3¹³⁄₁₆ 284.2 471.5 96.8

24¹⁄₂ 622.3

620

23048LB

8¹⁄₄ 209.55

25 635.0

22¹⁄₂ 571.5

8 203.2

1¹⁄₄ 30

5 127.0

2³⁄₈ 60.3

11 279.4

22¹⁄₄ 565.2

430

23056LB

9¹⁄₂ 241.30

27⁷⁄₈ 708.0

24³⁄₄ 32³⁄₄ 8³⁄₄ 628.6 831.8 222.2

1¹⁄₂ 36

5¹⁄₄ 133.4

2³⁄₄ 69.8

11³⁄₄ 19¹⁄₁₆ 4¹⁄₄ 24¹⁄₂ 298.4 484.2 108.0 622.3

595

7.8740 200.000 8.6614 220.000 9.4488 240.000 11.0236 280.000

8³⁄₄ 9⁹⁄₁₆ 10¹⁄₂ 12

7⁵⁄₈ 8⁵⁄₁₆ 9³⁄₁₆ 10³⁄₄

P-LB78200FR P-LB78220FR P-LB76240FR P-LB76280FR

29¹⁄₂ 749.3

16³⁄₄ 3¹³⁄₁₆ 425.4 96.8

156.5 188.2 281.2 195.0 269.9

Please consult for availability. Lubrication fitting tap size: for 3.5433" (90 mm) and smaller shafts, ¹⁄₈" PT, for all other shafts, ¹⁄₄" PT. * Expansion type block provides ³⁄₈" (9.5 mm) total axial movement. Fixed bearing is offset in relation to housing centerline. ** Drain plug tap size: for 3.5433" (90 mm) and smaller bores, ¹⁄₈" K Recommended dimension from bearing centerline to shaft face for PT; for 3.9370" (100 mm) through 6.6929" (170 mm) bores, ¹⁄₄" closed end unit. Minimum extension of shaft beyond locknut, .06 inch. PT; for all other bores, ¹⁄₂" PT. Selection guide, pages E-7, E-8. k See footnote, page E-16. Load ratings, pages E-9 through E-12. I Recommended dimension for cap removal. Additional information, page E-34. Recommended bearing seat diameters, pages F-11, F-12.

E-21


PK-LB7800FR, PK-LB7600FR Two-piece Cast Steel Housing 4-bolt Base Fixed or Expansion Self-aligning Direct Shaft Mounted Grease or Oil Lubrication

Fixed

Expansion

Dimensions (inches/mm) Bearing bore diameter 2.9528 75.000 3.1496 80.000 3.3465 85.000 3.9370 100.000

Shaft diameter V1

V2

3⁷⁄₁₆

2¹³⁄₁₆

3⁵⁄₈ 3¹⁵⁄₁₆ 4¹⁄₂

3 3³⁄₁₆ 3¹³⁄₁₆

Pillow block number PK-LB7875FR PK-LB7880FR PK-LB7885FR PK-LB78100FR

Bearing number

B

A max.

C

E

min.

F Bolts

G

H

K

L

T K

P I


22215LB

3¹⁄₄ 82.55

9⁵⁄₈ 244.5

8⁵⁄₈ 11¹⁄₄ 219.1 285.8

4³⁄₈ 111.1

¹⁄₂ 12

1⁷⁄₈ 47.6

1¹⁄₂ 38.1

4³⁄₄ 6³⁄₈ 1¹⁵⁄₃₂ 120.6 161.9 37.3

10¹⁄₄ 260.4

35

22216LB

3¹⁄₂ 88.90

11 279.4

9⁵⁄₈ 13 244.5 330.2

4⁷⁄₈ 123.8

⁵⁄₈ 16

2 50.8

1⁵⁄₈ 41.3

5¹⁄₄ 7 133.4 177.8

1¹⁄₂ 38.1

11 279.4

48

22217LB

3³⁄₄ 95.25

11 279.4

9⁷⁄₈ 13 250.8 330.2

4⁷⁄₈ 123.8

⁵⁄₈ 16

2 50.8

1⁵⁄₈ 41.3

5¹⁄₄ 7³⁄₈ 133.4 187.3

1¹⁹⁄₃₂ 40.5

11¹⁄₂ 292.1

50

22220LB

4¹⁄₂ 114.30

13¹⁄₈ 333.4

11⁵⁄₈ 15¹⁄₄ 295.3 387.4

6 152.4

³⁄₄ 20

2³⁄₈ 60.3

1⁷⁄₈ 47.6

6¹⁄₂ 8¹³⁄₁₆ 1²⁹⁄₃₂ 165.1 223.8 48.4

13³⁄₄ 349.2

85

12⁵⁄₈ 16¹⁄₂ 320.7 419.1

6¹⁄₂ 165.1

³⁄₄ 20

2³⁄₄ 69.8

2 50.8

7 177.8

15¹⁄₄ 105 387.4 47.6

22.7 38.6

4⁷⁄₈

4³⁄₁₆

PK-LB78110FR

22222LB

4¹⁵⁄₁₆ 14¹⁄₂ 125.41 368.3

5.1181 130.000

5⁷⁄₈

4¹⁵⁄₁₆

PK-LB78130FR

22226LB

6 16 14⁵⁄₈ 152.40 406.4

18³⁄₈ 7¹⁄₄ 371.5 466.7

⁷⁄₈ 184.2

3¹⁄₄ 24

2¹⁄₄ 82.6

7³⁄₄ 57.2

11¹⁄₂ 2¹⁵⁄₃₂ 18¹⁄₄ 196.8 292.1 62.7

187 463.6

84.8

22228LB

6 17¹⁄₈ 16 152.40 435.0

20¹⁄₈ 6⁷⁄₈ 406.4 511.2

1 174.6

3³⁄₈ 24

2¹⁄₂ 85.7

7¹⁄₂ 63.5

11¹⁵⁄₁₆ 2⁵⁄₈ 19¹⁄₄ 190.5 303.2 66.7

190 489.0

86.2

17³⁄₈ 22 441.3 558.8

8 203.2

1 24

3³⁄₄ 95.2

2³⁄₄ 69.8

8¹⁄₂ 13¹⁄₂ 2³¹⁄₃₂ 215.9 342.9 75.4

20¹⁄₂ 250 520.7 113.4

6¹⁄₄

5⁵⁄₁₆

PK-LB78140FR

2¹⁄₈ 54.0

21.8

4.3307 110.000

5.5118 140.000

9³⁄₄ 247.6

15.9

6.2992 160.000

7

6¹⁄₁₆

PK-LB78160FR

22232LB

6¹¹⁄₁₆ 19¹⁄₄ 169.86 489.0

6.6929 170.000

7⁷⁄₁₆

6⁷⁄₁₆

PK-LB78170FR

22234LB

7¹⁄₁₆ 179.39

21⁵⁄₈ 549.3

19³⁄₈ 24³⁄₄ 492.1 628.6

8³⁄₄ 222.2

1 24

4¹⁄₄ 3 108.0 76.2

9¹⁄₄ 14¹⁄₄ 3¹⁄₈ 235.0 362.0 79.4

22¹⁄₄ 344 565.2 156.0

7.0866 180.000

7¹³⁄₁₆

6⁷⁄₈

PK-LB78180FR

22236LB

7¹⁄₂ 23⁵⁄₈ 190.50 600.1

20⁷⁄₈ 26³⁄₄ 530.2 679.4

9¹⁄₈ 231.8

1 24

4⁵⁄₈ 117.5

3¹⁄₄ 82.6

9⁵⁄₈ 14¹⁵⁄₁₆ 3⁵⁄₃₂ 244.5 379.4 80.2

23¹⁄₄ 365 590.6 165.6

7.4803 190.000

8³⁄₈

7¹⁄₄

PK-LB78190FR

22238LB

7⁷⁄₈ 200.02

24³⁄₈ 619.1

21⁵⁄₈ 28 549.3 711.2

9³⁄₄ 247.6

1¹⁄₄ 30

4¹⁄₂ 3¹⁄₄ 114.3 82.6

10¹⁄₄ 15¹³⁄₁₆ 3⁵⁄₁₆ 260.4 401.6 84.1

25 450 635.0 204.1

8.6614 220.000

9⁹⁄₁₆

8⁵⁄₁₆

PK-LB78220FR

22244LB

9¹⁄₂ 241.30

27⁷⁄₈ 701.7

25₅⁄₈ 657.2

32 812.8

12 304.8

1³⁄₄ 48

7¹⁄₄ 4 12⁵⁄₈ 18¹¹⁄₁₆ 3¹³⁄₁₆ 184.2 101.6 320.7 474.7 96.8

29¹⁄₄ 770 743.0 349.3

9.4488 240.000

10¹⁄₂

9³⁄₁₆

PK-LB76240FR

23048LB

8¹⁄₄ 25 209.55 635.0

22¹⁄₂ 29¹⁄₂ 571.5 749.3

10³⁄₈ 263.5

1¹⁄₄ 30

5 127.0

26¹⁄₂ 530 673.1 240.4

11.0236 280.000

12

10³⁄₄

PK-LB76280FR

23056LB

9¹⁄₂ 241.30

25⁷⁄₈ 657.2

12 304.8

1³⁄₄ 48

7¹⁄₄ 4 12⁵⁄₈ 18¹¹⁄₁₆ 4¹⁄₄ 29¹⁄₄ 745 184.2 101.6 320.7 747.7 108.0 743.0 337.9

27⁵⁄₈ 701.7

32 812.8

3¹⁄₂ 88.9

11 279.4

16¹⁄₂ 3¹³⁄₁₆ 419.1 96.8

Please consult for availability. Lubrication fitting tap size: ¹⁄₄" PT. * Expansion type block provides ³⁄₈" (9.5 mm) total axial movement. Fixed bearing is offset in relation to housing centerline. ** Drain plug tap size: for 6.6929" (170 mm) and smaller bores, ¹⁄₂" PT; for all other bores, ¹⁄₂" PT. K Recommended dimension from bearing centerline to shaft face for closed end unit. Minimum extension of shaft beyond locknut, .06 inch. V Recommended dimension for cap removal. Selection guide, pages E-7, E-8. Load ratings, pages E-9 through E-12. Additional information, page E-34. Recommended bearing seat diameters, pages F-11, F-12.

E-22


P-LB6900R, P-LB6900FR, SAF22600 Two-piece Cast Iron Housing 2 or 4-bolt Base Fixed or Expansion Self-aligning Tapered Adapter Mounted Grease or Oil Lubrication

Fixed

Expansion

Dimensions (inches/mm) V Shaft diameter inches 1⁷⁄₁₆ 1¹⁄₂

Pillow block number P-LB6923R P-LB6924R

1¹¹⁄₁₆

P-LB6927R

1¹⁵⁄₁₆ 2

P-LB6931R P-LB6932R

Bearing number

B

A

C

max.

min.

E

F Bolts

G

H

K

L

T K

P I


22309LBK

2³⁄₄ 69.85

8 203.2

7¹⁄₄ 184.2

9⁵⁄₈ 244.5

2³⁄₄ 69.8

⁵⁄₈ 16

....

1 25.4

4¹⁄₈ 5³⁄₈ 104.8 136.5

1⁵⁄₁₆ 33.3

7¹⁄₂ 190.5

20

22310LBK

3 76.20

9 228.6

7³⁄₄ 196.8

10⁵⁄₈ 269.9

2³⁄₄ 69.8

⁵⁄₈ 16

....

1¹⁄₈ 28.6

4¹⁄₂ 114.3

5⁷⁄₈ 149.2

1¹⁵⁄₃₂ 37.3

7⁷⁄₈ 200.0

23

22311LBK

3¹⁄₄ 82.55

9¹⁄₂ 241.3

8¹⁄₈ 206.4

11 279.4

3¹⁄₈ 79.4

⁵⁄₈ 16

....

1³⁄₁₆ 30.2

4³⁄₄ 6⁵⁄₁₆ 120.6 160.3

1⁹⁄₁₆ 39.7

8¹⁄₂ 215.9

28

3¹⁄₂

11

9⁵⁄₈

13

3¹⁄₂

5¹⁄₄

7

1²³⁄₃₂

9⁵⁄₈

41

279.4

244.5

330.2

88.9

.... 2 .... 50.8

1¹⁄₄

88.90

³⁄₄ ⁵⁄₈ 20 16

31.8

133.4

177.8

43.7

244.5

4

11⁵⁄₈

10³⁄₈

13³⁄₄

3⁷⁄₈

5⁷⁄₈

7¹⁵⁄₁₆

1¹⁵⁄₁₆

10¹⁄₂

295.3

263.5

349.2

98.4

.... 2¹⁄₈ .... 54.0

1⁵⁄₁₆

101.60

³⁄₄ ⁵⁄₈ 20 16

33.3

149.2 201.6

49.2

266.7

4¹⁄₄

12⁵⁄₈

10⁵⁄₈

14¹⁄₄

3⁷⁄₈

.... 2¹⁄₄

1⁵⁄₁₆

6¹⁄₈

2

11¹⁄₄

107.95

320.7

269.9

362.0

98.4

³⁄₄ ⁵⁄₈ 20 16

33.3

155.6 212.7

50.8

285.8

⁷⁄₈ ³⁄₄ 24 20

.... 2³⁄₈ .... 60.3

1¹⁄₂

6¹⁄₂

2¹⁄₂

11³⁄₄

38.1

165.1 225.4

63.5

298.4

2³⁄₁₆


22313LBK

2⁷⁄₁₆ 2¹⁄₂

P-LB6939R P-LB6939FR P-LB6940R P-LB6940FR

22315LBK

2¹¹⁄₁₆


22316LBK

8³⁄₈

9.1 10.4 12.7

18.6 52 23.6 59 26.8

54.0

4¹⁄₂

13¹⁄₈

11⁵⁄₈

15¹⁄₄

4³⁄₈

114.30

333.4

295.3

387.4

111.1

22318LBK

4³⁄₄ 120.65

13¹⁄₂ 342.9

12 304.8

15¹⁄₂ 393.7

4³⁄₈ 111.1

³⁄₄ 20

2¹⁄₄ 57.2

2 50.8

6⁷⁄₈ 174.6

9¹⁄₄ 235.0

2⁷⁄₃₂ 56.4

12¹⁄₄ 311.2

SAF22620-307 SAF22620-308

22320LBK

5¹⁄₄ 133.35

14¹⁄₂ 368.3

13¹⁄₄ 336.6

16¹⁄₂ 419.1

4³⁄₄ 120.6

³⁄₄ 20

2³⁄₄ 69.8

1³⁄₄ 44.4

7¹⁄₈ 181.0

10⁷⁄₁₆ 265.1

2⁷⁄₁₆ 61.9

13¹⁄₂ 342.9

111 50.3

3¹⁵⁄₁₆ 4

SAF22622-315 SAF22622-400

22322LBK

6 152.40

16 406.4

14⁵⁄₈ 371.5

18³⁄₈ 466.7

5¹⁄₈ 130.2

⁷⁄₈ 24

3¹⁄₄ 82.6

1⁷⁄₈ 47.6

7³⁄₄ 11¹¹⁄₁₆ 196.8 296.9

2²¹⁄₃₂ 67.5

14¹⁄₂ 368.3

149 67.6

4³⁄₁₆

SAF22624-403

22324LBK

6⁵⁄₁₆ 160.84

18¹⁄₄ 463.6

17 431.8

21¹⁄₄ 539.8

6¹⁄₄ 158.8

1 24

3³⁄₄ 95.2

2¹⁄₂ 63.5

8³⁄₈ 12¹⁄₂ 212.7 317.5

2¹³⁄₁₆ 71.4

16 406.4

225

22326LBK

6¹¹⁄₁₆ 169.86

19¹⁄₄ 489.0

17³⁄₈ 441.3

22 558.8

6¹⁄₄ 158.8

1 24

3³⁄₄ 95.2

2⁵⁄₈ 66.7

8³⁄₄ 222.3

13⁵⁄₁₆ 338.1

3⁵⁄₁₆ 84.1

17 431.8

228

22328LBK

7¹⁄₁₆ 179.39

21⁵⁄₈ 549.3

19³⁄₈ 492.1

24³⁄₄ 628.6

6³⁄₄ 171.4

1 24

4¹⁄₄ 108.0

2³⁄₄ 69.8

9⁵⁄₈ 244.5

14³⁄₁₆ 360.4

3¹⁄₄ 82.6

18 457.2

330

22330LBK

7¹⁄₂ 190.50

23⁵⁄₈ 600.1

20⁷⁄₈ 530.2

26³⁄₄ 679.4

7¹⁄₈ 181.0

1 24

4⁵⁄₈ 117.5

3 76.2

9³⁄₄ 247.6

14⁷⁄₈ 377.8

3⁷⁄₁₆ 87.3

18³⁄₄ 476.2

375

22332LBK

7⁷⁄₈ 200.02

24³⁄₈ 619.1

21⁵⁄₈ 549.3

28 711.2

7¹⁄₂ 190.5

1¹⁄₄ 30

4¹⁄₂ 114.3

3¹⁄₈ 79.4

10³⁄₄ 273.0

15¹¹⁄₁₆ 398.5

3⁵⁄₈ 92.1

20¹⁄₂ 520.7

430

22334LBK

8¹⁄₄ 209.55

25 635.0

22¹⁄₂ 571.5

29¹⁄₂ 749.3

8 203.2

1¹⁄₄ 30

5 127.0

3³⁄₈ 85.7

11¹⁄₄ 16¹⁄₂ 285.8 419.1

3³⁄₄ 95.2

22¹⁄₄ 565.2

515 233.6

2¹⁵⁄₁₆


22317LBK

3³⁄₁₆

SAF22618-303

3⁷⁄₁₆ 3¹⁄₂

4⁷⁄₁₆

SAF22626-407

4¹⁵⁄₁₆ 5

SAF22628-415 SAF22628-500

5³⁄₁₆ 5⁷⁄₁₆ 5¹⁵⁄₁₆

SAF22630-503 SAF22632-507 SAF22634-515

8⁷⁄₈

71 32.2 97 44.0

102.1 103.5 149.7 170.1 195.0

Please consult for availability. Lubrication fitting tap size: for 2¹¹⁄₁₆" and smaller shafts, ¹⁄₈" PT; for all other shafts, ¹⁄₄" PT. * Expansion type block provides ³⁄₈" (9.5 mm) total axial movement. Fixed bearing is offset in relation to housing centerline. ** Drain plug tap size: for 2¹¹⁄₁₆" (70 mm) and smaller shafts, ¹⁄₈" PT; for all other shafts, ¹⁄₄" PT. K Recommended dimension from bearing centerline to shaft face for closed end unit. Minimum extension of shaft beyond locknut, .06 inch. V Recommended dimension for cap removal. Selection guide, pages E-7, E-8. Load ratings, pages E-13, E-14. Additional information, page E-34.

E-23


P-LB7900R, P-LB7900FR, SAF22300 Two-piece Cast Iron Housing 2 or 4-bolt Base Fixed or Expansion Self-aligning Direct Shaft Mounted Grease or Oil Lubrication

Fixed

Expansion

Dimensions (inches/mm) Bearing bore diameter 1.7717 45.000 1.9685 50.000 2.1654 55.000

Shaft diameter V1 2¹⁄₈ 2³⁄₈ 2⁹⁄₁₆

2.5591 65.000

3¹⁄₁₆

2.9528 75.000

3⁷⁄₁₆

3.1496 80.000

3⁵⁄₈

3.3465 85.000

3¹⁵⁄₁₆

3.5433 90.000

4¹⁄₈

3.9370 100.000 4.3307 110.000 4.7244 120.000 5.1181 130.000 5.5118 140.000 5.9055 150.000

4¹⁄₂ 4⁷⁄₈ 5⁵⁄₁₆ 5⁷⁄₈ 6¹⁄₄ 6⁵⁄₈

V2 1¹¹⁄₁₆ 1⁷⁄₈ 2¹⁄₁₆

2⁷⁄₁₆

2¹³⁄₁₆

3

3³⁄₁₆

3³⁄₈ 3¹³⁄₁₆ 4³⁄₁₆ 4⁹⁄₁₆ 4¹⁵⁄₁₆ 5⁵⁄₁₆ 5³⁄₄

Pillow block number G P-LB7945R P-LB7950R P-LB7955R

Bearing number

H

K

L

T K

P


⁵⁄₈ 16

....

1 25.4

4¹⁄₈ 5³⁄₈ 1⁵⁄₁₆ 104.8 136.5 33.3

7¹⁄₂ 190.5

18

22310LB

3 76.20

9 228.6

7³⁄₄ 10⁵⁄₈ 2³⁄₄ 196.8 269.9 69.8

⁵⁄₈ 16

....

1¹⁄₈ 28.6

4¹⁄₂ 114.3

5⁷⁄₈ 1¹⁵⁄₃₂ 149.2 37.3

7⁷⁄₈ 200.0

22

22311LB

3¹⁄₄ 82.55

9¹⁄₂ 241.3

8¹⁄₈ 11 206.4 279.4

3¹⁄₈ 79.4

⁵⁄₈ 16

....

1³⁄₁₆ 30.2

4³⁄₄ 6⁵⁄₁₆ 1⁹⁄₁₆ 120.6 160.3 39.7

8¹⁄₂ 215.9

27

9⁵⁄₈

3¹⁄₂ ⁵⁄₈

³⁄₄ 2 20 16

....

1¹⁄₄

5¹⁄₄

9⁵⁄₈

39

.... 50.8

31.8

133.4 177.8 43.7

244.5

1⁵⁄₁₆

5⁷⁄₈

10¹⁄₂

33.3

149.2 201.6 49.2

266.7 11¹⁄₄

3¹⁄₂

22316LB


22317LB

SAF22318

SAF22330

G

2³⁄₄ 69.8


SAF22328

F Bolts

7¹⁄₄ 9⁵⁄₈ 184.2 244.5

22315LB

SAF22326

E

8 203.2


SAF22324

C min.

2³⁄₄ 69.85

22313LB

SAF22322

max.

22309LB


SAF22320

B

A

11

13

88.90

279.4

244.5

330.2 88.9

4

11⁵⁄₈

10³⁄₈

13³⁄₄

101.60

295.3

263.5 349.2 98.4

4¹⁄₄

12⁵⁄₈

10⁵⁄₈

107.95

320.7

269.9 362.0 98.4

4¹⁄₂

13¹⁄₈

11⁵⁄₈

114.30

333.4

295.3 387.4

22318LB

4³⁄₄ 120.65

13¹⁄₂ 342.9

22320LB

5¹⁄₄ 133.35

7

1²³⁄₃₂

8.2 10.0 12.2

17.7

³⁄₄ ⁵⁄₈ 20 16

.... 2¹⁄₈ .... 54.0

³⁄₄ ⁵⁄₈ 20 16

.... 2¹⁄₈ .... 54.0

1⁵⁄₁₆

6¹⁄₈

33.3

155.6 212.7 50.8

285.8

⁷⁄₈ ³⁄₄ 24 20

.... 2³⁄₈ .... 60.3

1¹⁄₂

6¹⁄₂

11³⁄₄

38.1

165.1 225.4 63.5

298.4

12 15¹⁄₂ 4³⁄₈ 304.8 393.7 111.1

³⁄₄ 20

2¹⁄₄ 57.2

2 50.8

6⁷⁄₈ 174.6

9³⁄₁₆ 2⁷⁄₃₂ 233.4 56.4

12¹⁄₄ 311.2

94

14¹⁄₂ 368.3

13¹⁄₄ 336.6

16¹⁄₂ 4³⁄₄ 419.1 120.6

³⁄₄ 20

2³⁄₄ 69.8

1³⁄₄ 44.4

7¹⁄₈ 10⁷⁄₁₆ 2⁷⁄₁₆ 181.0 265.1 61.9

13¹⁄₂ 342.9

118

22322LB

6 152.40

16 406.4

14⁵⁄₈ 371.5

18³⁄₈ 5¹⁄₈ 466.7 130.2

⁷⁄₈ 24

3¹⁄₄ 82.6

1⁷⁄₈ 47.6

7³⁄₄ 11¹¹⁄₁₆ 2²¹⁄₃₂ 196.8 296.9 67.5

14¹⁄₂ 368.3

147

22324LB

6⁵⁄₁₆ 160.34

18¹⁄₄ 463.6

17 431.8

21¹⁄₄ 6¹⁄₄ 339.8 158.8

1 24

3³⁄₄ 95.2

2¹⁄₂ 63.5

8³⁄₈ 12¹⁄₂ 2¹³⁄₁₆ 212.7 317.5 71.4

16 406.4

215

22326LB

6¹¹⁄₁₆ 169.86

19¹⁄₄ 489.0

17³⁄₈ 441.3

22 6¹⁄₄ 558.8 158.8

1 24

3³⁄₄ 95.2

2⁵⁄₈ 66.7

8³⁄₄ 222.3

13⁵⁄₁₆ 3⁵⁄₁₆ 338.1 84.1

17 431.8

215

22328LB

7¹⁄₁₆ 179.39

21⁵⁄₈ 549.3

19³⁄₈ 492.1

24³⁄₄ 6³⁄₄ 628.6 171.4

1 24

4¹⁄₄ 108.0

2³⁄₄ 69.8

9³⁄₈ 14³⁄₁₆ 3¹⁄₄ 238.1 360.4 82.6

18 457.2

320

22330LB

7¹⁄₂ 190.50

23⁵⁄₈ 600.1

20⁷⁄₈ 530.2

26³⁄₄ 679.4

7¹⁄₈ 181.0

1 24

4⁵⁄₈ 117.5

3 76.2

9³⁄₄ 247.6

14⁷⁄₈ 3⁷⁄₁₆ 377.8 87.3

18³⁄₄ 476.2

350

24³⁄₈ 619.1

21⁵⁄₈ 28 549.3 711.2

7¹⁄₂ 190.5

1¹⁄₄ 30

4¹⁄₂ 114.3

3¹⁄₈ 79.4

10³⁄₄ 273.0

15¹¹⁄₁₆ 3⁵⁄₈ 398.5 92.1

20¹⁄₂ 520.7

410 186.0

25 635.0

22¹⁄₂ 571.5

8 203.2

1¹⁄₄ 30

5 127.0

3³⁄₈ 85.7

11¹⁄₄ 16¹⁄₂ 3³⁄₄ 285.8 419.1 95.2

22¹⁄₄ 565.2

485 220.2

6.2992 160.000

7

6¹⁄₁₆

SAF22332

22332LB

7⁷⁄₈ 200.02

6.6929 170.000

7⁷⁄₁₆

6⁷⁄₁₆

SAF22334

22334LB

8¹⁄₄ 209.55

14¹⁄₄

15¹⁄₄

29¹⁄₂ 749.3

3⁷⁄₈

3⁷⁄₈

4³⁄₈ 111.1

7¹⁵⁄₁₆

8³⁄₈

8⁷⁄₈

1¹⁵⁄₁₆

2

2¹⁄₂

50 22.7 58 26.3 71 32.2

42.6 53.6 66.7 97.5 97.6 145.2 158.8

Please consult for availability. Lubrication fitting tap size: for 3.1496" (80 mm) and smaller bores, ¹⁄₈" PT; for all other bores, ¹⁄₄" PT. * Expansion type block provides ³⁄₈" (9.5 mm) total axial movement. Fixed bearing is offset in relation to housing centerline. ** Drain plug tap size: for 3.1496" (80 mm) and smaller bores, ¹⁄₈" PT; for 3.346" (85 mm) through 4.3307" (110 mm) bores, ¹⁄₄" PT; for 4.7244" (120 mm) through 6.2992" (160 mm) bores, ³⁄₈" PT; for all other bores, ¹⁄₂" PT. K Recommended dimension from bearing centerline to shaft face for closed end unit. Minimum extension of shaft beyond locknut, .06 inch. G SAF pillow blocks include locknut and lockwasher, for P-LB pillow blocks with locknut and lockwasher add suffix "T2" ie P-LB7945RT2. Selection guide, pages E-7, E-8. Load ratings, pages E-13, E-14. Additional information, page E-34. Recommended bearing seat diameters, pages F-11, F-12.

E-24


LHD Type (Bearing Unit Not Included) Welded Steel Frame Protected Screw P-LB6800 Bearing Unit Pillow Block P-LB7800 Pillow Block

Shaft Sizes P-LB68 P-LB78 inches

mm

Takeup frame number

Adjustment 12 18 24 30 36 48

29 35 41 47 53 65

31 37 43 49 55 67

4 101.6

5 127.0

B

C

D

E

F Bolts

G

H

K

L

M

R

⁵⁄₈ 16

2¹⁄₂ 63.5

S rod dia.

V

Z

¹⁄₄ 6.4

8¹⁄₂ 215.9

5¹⁄₄ 133.4

11 279.4

4 101.6

³⁄₄

2 50.8

6¹⁄₄ 158.8

1⁷⁄₁₆ thru 2³⁄₁₆

...


2⁷⁄₁₆ thru 3

75 thru 85


12 18 24 30 36 48

32³⁄₄ 38³⁄₄ 44³⁄₄ 50³⁄₄ 56³⁄₄ 68³⁄₄

35¹⁄₄ 41¹⁄₄ 47¹⁄₄ 53¹⁄₄ 59¹⁄₄ 71¹⁄₄

5 127.0

5¹⁄₂ 139.7

⁵⁄₈ 16

3 76.2

³⁄₈ 9.5

10³⁄₈ 263.5

6¹⁄₄ 158.8

13¹⁄₄ 336.6

5 127.0

1

2⁹⁄₁₆ 65.1

7¹⁄₈ 181.0

90


12 18 24 30 36 48

35¹⁄₂ 41¹⁄₂ 47¹⁄₂ 53¹⁄₂ 59¹⁄₂ 71¹⁄₂

38¹⁄₄ 44¹⁄₄ 50¹⁄₄ 56¹⁄₄ 62¹⁄₄ 74¹⁄₄

6 152.4

6¹⁄₂ 165.1

³⁄₄ 20

3 76.2

¹⁄₂ 12.7

11³⁄₄ 298.4

7 177.8

14¹⁄₄ 362.0

6 152.4

1

2¹⁄₂ 63.5

9 228.6

3⁷⁄₁₆ thru 3¹⁄₂

100


12 18 24 30 36 48

37¹⁄₄ 43¹⁄₄ 49¹⁄₄ 55¹⁄₄ 61¹⁄₄ 73¹⁄₄

40 46 52 58 64 76

6 152.4

6¹⁄₂ 165.1

³⁄₄ 20

3 76.2

¹⁄₂ 12.7

12⁵⁄₈ 320.7

7 177.8

16 406.4

6 152.4

1¹⁄₄

2¹⁄₂ 63.5

9 228.6

3¹¹⁄₁₆ thru 4¹⁄₂

110 thru 130


12 18 24 30 36 48

41¹⁄₄ 47¹⁄₄ 53¹⁄₄ 59¹⁄₄ 65¹⁄₄ 77¹⁄₄

44 50 56 62 68 80

7 177.8

6¹⁄₂ 165.1

³⁄₄ 20

3 76.2

¹⁄₂ 12.7

14⁵⁄₈ 371.5

7 177.8

20 508.0

6 152.4

1¹⁄₂

2¹⁄₂ 63.5

9 228.6

4¹⁵⁄₁₆ thru 5⁷⁄₁₆

140 thru 160


12 18 24 30 36 48

47 53 59 65 71 83

49¹⁄₂ 55¹⁄₂ 61¹⁄₂ 67¹⁄₂ 73¹⁄₂ 85¹⁄₂

8¹⁄₂ 215.9

7 177.8

⁷⁄₈ 24

4 101.6

¹⁄₂ 12.7

17¹⁄₂ 444.5

7³⁄₄ 196.8

23¹⁄₂ 596.9

6³⁄₄ 171.4

1¹⁄₂

3³⁄₈ 85.7

11¹⁄₄ 285.8

3³⁄₁₆

Bold face items are normally available from stock; please consult for availability of non-stock items. Takeup frames can be furnished drilled to accommodate pillow block; order takeup frame drilled for " " pillow block, i.e. LHD25-12 drilled for P-LB6839R. For load ratings, see rating table for pillow block to be used. Additional information, page E-34.

E-25


DS-LB6800 Welded Steel Frame Hinged Top Protected Screw Cast Iron Bearing Housing Self-aligning Tapered Adapter Mounted Independently Flushable Seals TD-LB6800D8 Takeup Unit

Shaft Adjustment diameter #

2⁷⁄₁₆

2¹⁵⁄₁₆

3⁷⁄₁₆

3¹⁵⁄₁₆

4⁷⁄₁₆

4¹⁵⁄₁₆

5¹⁵⁄₁₆

12 18 24 30 304.8 457.2 609.6 762.0 12 18 24 30 304.8 457.2 609.6 762.0 12 18 24 30 304.8 457.2 609.6 762.0 12 18 24 30 304.8 457.2 609.6 762.0 18 24 30 457.2 609.6 762.0 18 24 30 457.2 609.6 762.0 18 24 30 42 457.2 609.6 762.0 1066.8

Takeup number

DS-LB6839-12 DS-LB6839-18 DS-LB6839-24 DS-LB6839-30




DS-LB6871-18 DS-LB6871-24 DS-LB6871-30

Bearing number

A

5¹⁄₈ 22215LBK 130.2

5⁵⁄₈ 22217LBK 142.9

7 22220LBK 177.8

7¹⁄₂ 22222LBK 190.5

10 22226LBK 254.0

DS-LB6879-18 DS-LB6879-24 DS-LB6879-30


10¹⁄₂ 22228LBK 266.7

12¹⁄₈ 22234LBK 308.0

B

C

30¹⁄₂ 36¹⁄₂ 42¹⁄₂ 48¹⁄₂ 774.7 927.1 1079.5 1231.9

32¹⁄₂ 38¹⁄₂ 44¹⁄₂ 50¹⁄₂ 825.5 977.9 1130.3 1282.7

32 38 44 50 812.8 965.2 1117.6 1270.0

34¹⁄₄ 40¹⁄₄ 46¹⁄₄ 52¹⁄₄ 870.0 1022.4 1174.8 1327.2

36 42 48 54 914.4 1066.8 1219.2 1371.6

38¹⁄₂ 44¹⁄₂ 50¹⁄₂ 56¹⁄₂ 977.9 1130.3 1282.7 1435.1

36 42 48 54 914.4 1066.8 1219.2 1371.6

38¹⁄₂ 44¹⁄₂ 50¹⁄₂ 56¹⁄₂ 977.9 1130.3 1282.7 1435.1

47 53 59 1193.8 1346.2 1498.6

50¹⁄₂ 56¹⁄₂ 62¹⁄₂ 1282.7 1435.1 1587.5

49 55 61 1244.6 1397.0 1549.4

52¹⁄₂ 58¹⁄₂ 64¹⁄₂ 1333.5 1485.9 1638.3

55⁷⁄₈ 61⁷⁄₈ 67⁷⁄₈ 79⁷⁄₈ 1419.2 1571.6 1724.0 2028.8

60¹⁄₄ 66¹⁄₄ 72¹⁄₄ 84¹⁄₄ 1530.4 1682.8 1835.2 2140.0

E

F Bolts

G

H

K

L

V

W

Z.

4

⁵⁄₈

2

2

9¹⁄₄

10⁷⁄₈

3¹⁵⁄₃₂

2¹⁹⁄₃₂

5⁵⁄₈

101.6

16

50.8

50.8

235.0

276.2

88.1

65.9

142.9

4

³⁄₄

2

2

10

11¹³⁄₁₆

3¹⁄₂

2⁵⁄₈

5⁵⁄₈

101.6

20

50.8

50.8

254.0

300.0

88.9

66.7

142.9

5

³⁄₄

2¹⁄₂

2¹⁄₄

12

14¹¹⁄₁₆

4¹⁄₈

3¹⁄₄

6⁷⁄₈

127.0

20

63.5

57.2

304.8

373.1

104.8

82.6

174.6

5

³⁄₄

2¹⁄₂

2¹⁄₄

12

15¹¹⁄₁₆

4³⁄₈

3¹⁄₂

6⁷⁄₈

127.0

20

63.5

57.2

304.8

398.5

111.1

88.9

174.6

6

⁷⁄₈

3

4

14¹⁄₂

20¹⁄₄

4⁷⁄₈

3³⁄₄

7⁷⁄₈

152.4

24

76.2

101.6

368.3

514.4

123.8

95.2

200.0

6

1

3

4

15¹⁄₂

21¹⁄₈

4³⁄₄

3²⁷⁄₃₂

7⁷⁄₈

152.4

24

76.2

101.6

393.7

536.6

120.7

97.6

200.0

7¹⁄₂

1¹⁄₄

3³⁄₄

4

18¹⁵⁄₁₆

25¹⁄₂

5³³⁄₆₄

4¹⁄₂

9⁷⁄₈

190.5

30

95.2

101.6

481.0

647.7

140.1

114.3 250.8

Unit Wt. (lbs./kgs.) 94 103 111 119 42.6 46.7 50.3 54.0 120 130 145 155 54.4 59.0 65.8 70.3 206 218 230 242 93.4 98.9 104.3 109.8 255 270 285 300 115.7 122.5 129.3 136.1 414 432 450 187.8 196.0 204.1 475 494 515 215.5 224.1 233.6 708 726 746 784 321.1 329.3 338.4 355.6

Bold face items are normally available from stock; please consult for availability of non-stock items. Expansion types block provides ³⁄₈" (9.5 mm) total axial movement. Fixed bearing is offset in relation to housing bore centerline. Standard seal arrangement, D8 type. 4" channel (Dim E) has removable top construction (see page D-23). # Takeups with adjustment of 18" (457.2 mm) or more have center ing pad welded to bottom of frame. Selection guide, page E-7, E-8. Load ratings, page E-9. Additional information, page E-34.

E-26

Nomenclature

Series 6600, 6800, 6900, 7600, 7800, 7900 Pillow blocks Symbol

Description

BP P PK

Pillow block; two-piece; black Rilsan nylon II coated Pillow block; two-piece Pillow block; two-piece cast steel housing (66, 68, 76 and 78 series)

E LB

Expansion Mounting Spherical roller bearing

66 68 69 76 78 79

Adapter mounted with 23000LBK bearing Adapter mounted with 22200LBK bearing Adapter mounted with 22300LBK bearing Direct shaft mounted with 23000LB bearing Direct shaft mounted with 22200LB bearing Direct shaft mounted with 22300LB bearing

M 39 65 60 F None D5 D8 B R C T2 2 0 None 4

P

E - LB

79

65

F

B

C -T2/ 3

Metric bore adapter mount Shaft diameter in 16ths of an inch — adapter mounted Inner ring bore in millimeters — direct shaft mounted Shaft diameter in millimeters — adapter mounted Four bolt base pillow block "T" Water seals Pentac™ 5-point seals Independently flushable seal Felt seal Multi-labyrinth seal Closed end unit Locknut and washer included (76, 78, 79 series) Internal clearance less than C0 Basic C0 internal clearance Internal clearance greater than C0 (standard) Internal clearance greater than C3

Takeups Symbol DS E

Description

68

Adapter mounted with 22200LBK bearing

39

Shaft diameter in 16ths of an inch — adapter mounted

12

C

12

Expansion unit Spherical roller bearing

C

LB 68 39

Takeup, welded steel frame, hinged top

LB

None

DS E

D8 independently flushable seal (standard) Closed end unit Takeup adjustment, inches

The nomenclature shown is provided to identify the basic and optional features of bearing and mounted unit assemblies. The most commonly specified variations are listed; however, availability of all variations cannot be assumed. Link-Belt Bearing Division, Rexnord Corp. should be consulted regarding optional features, availability, and the application requirements. E-27

Nomenclature

Series SAF22600, SAF22300 Pillow blocks Symbol F SAF

F

Description

None E

Fixed Unit — Furnish with spacer ring Expansion Unit Direct shaft mounted with 22300LB spherical roller bearing Adapter mounted with 22300LBK spherical roller bearing One-fifth bearing bore diameter in mm Closed end unit

T

Lockwasher and locknut NOT INCLUDED (22300 Series)

215 2 0 None 4

-215 /

Housing Material

C

None

17

Pillow block; two-piece; inch series; labyrinth seal Gray Iron Cast Steel

17

226

Four bolt base

None S

223 226

SAF

Direct shaft mounted shaft size Adapter mounted shaft size in inch and ¹⁄₁₆, i.e., 215 is 2¹⁵⁄₁₆ inch shaft size Internal clearance less than C0 Basic internal clearance Internal clearance greater than C0 (standard) Internal clearance greater than C3

Radial Clearance


E-28


Series 6600, 6800 Optional End Closure

Housing

Bearing

Adapter

Locknut Lockwasher

Pillow block number G P-LB6823R P-LB6824R P-LB6827R P-LB6828R P-LB6831R P-LB6832R P-LB6835R P-LB6839R* P-LB6843R* P-LB6847R* P-LB6848R* P-LB6851R* P-LB6855R* P-LB6856R* P-LB6859FR P-LB6863FR P-LB6864FR P-LB6867FR P-LB6871FR P-LB6872FR P-LB6879FR P-LB6880FR P-LB6883FR P-LB6887FR P-LB6895FR P-LB6896FR P-LB68103FR P-LB68104FR P-LB68111FR P-LB68112FR P-LB68115FR P-LB68120FR P-LB68127FR P-LB68128FR P-LB66135FR P-LB66136FR P-LB66144FR P-LB66B151FR P-LB66B152FR P-LB66159FR P-LB66160FR P-LB66167FR P-LB66168FR

Shaft diameter inches 1⁷⁄₁₆ 1¹⁄₂ 1¹¹⁄₁₆ 1³⁄₄ 1¹⁵⁄₁₆ 2 2³⁄₁₆ 2⁷⁄₁₆ 2¹¹⁄₁₆ 2¹⁵⁄₁₆ 3 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4 4³⁄₁₆ 4⁷⁄₁₆ 4¹⁄₂ 4¹⁵⁄₁₆ 5 5³⁄₁₆ 5⁷⁄₁₆ 5¹⁵⁄₁₆ 6 6⁷⁄₁₆ 6¹⁄₂ 6¹⁵⁄₁₆ 7 7³⁄₁₆ 7¹⁄₂ 7¹⁵⁄₁₆ 8 8⁷⁄₁₆ 8¹⁄₂ 9 9⁷⁄₁₆ 9¹⁄₂ 9¹⁵⁄₁₆ 10 10⁷⁄₁₆ 10¹⁄₂

Spherical roller bearing number 22209LBK/W33/C3 22210LBK/W33/C3 22211LBK/W33/C3 22213LBK/W33/C3 22215LBK/W33/C3 22216LBK/W33/C3 22217LBK/W33/C3 22218LBK/W33/C3 22220LBK/W33/C3 22222LBK/W33/C3 22224LBK/W33/C3 22226LBK/W33/C3 22228LBK/W33/C3 22230LBK/W33/C3 22232LBK/W33/C3 22234LBK/W33/C3 22236LBK/W33/C3 22238LBK/W33/C3 22240LBK/W33/C3 22244LBK/W33/C3

23048LBK/W33/C3

23056LBK/W33/C3

Labyrinth seal number K

Adapter assembly number

LB6923-3R LB6924-3R LB6927-3R LB6928-3R LB6931-3RA LB6932-3R LB6935-3RA LB6839-3RA LB6843-3RA LB6847-3RA LB6848-3R LB6851-3R LB6855-3RA LB6856-3R LB6859-3R LB6863-3RA LB6864-3R LB6867-3R LB6871-3RA LB6872-3R LB6879-3R LB6880-3R LB6883-3R LB6887-3R LB6895-3R LB6896-3R LB68103-3R LB68104-3R LB68111-3R LB68112-3R LB68115-3R LB68120-3R LB68127-3R LB68128-3R LB66135-3R LB66136-3R LB66144-3R LB66B151-3R LB66B152-3R LB66159-3R LB66160-3R LB66167-3R LB66168-3R

H309023 H309024 H310027 H310028 H311031 H311032 H313035 H315039 H316043 H317047 H318051 H320055 H320056 H322063 H322064 H3124067 H3126071 H3126072 H3128079 H3128080 H3130083 H3132087 H3134095 H3134096 H3136103 H3136104 H3138111 H3138112 H3140115 H3144120 H3144127 SNW44-7¹⁄₂ SNW44-7¹⁵⁄₁₆ SNW44-8 SNP3048-8⁷⁄₁₆ SNP3048-9¹⁄₂ SNP3048-9 SNP3056-9⁷⁄₁₆ SNP3056-9¹⁄₂ SNP3056-9¹⁵⁄₁₆ SNP3056-10 SNP3056-10⁷⁄₁₆ SNP3056-10¹⁄₂

C-spacer number

End closure ‡

6824-4

LB6924-6R

6828-4

LB6928-6R

6924-4

LB6932-6R

6932-4 6840-4 6844-4

LB6936-6R LB6840-6R LB6844-6R

6848-4

LB6848-6R

6852-4

LB6852-6R

6856-4

LB6856-6R

6864-4

LB6864-6R

6868-4

LB6868-6R

6872-4

LB6872-6R

6880-4

LB6880-6R

6884-4 6892-4

LB6884-6R LB6888-6R

6896-4

LB6896-6R

68104-4

LB68104-6R

68112-4

LB68112-6R

68116-4

LB68116-6R

68128-4

LB68128-6R

66144-4

LB66144-6R LB66152-6R

66168-4

LB66160-6R LB66168-6R

Housing number G (Bearing and adapter assembly not included)

P-LB6823R-02 P-LB6824R-02 P-LB6827R-02 P-LB6828R-02 P-LB6831R-02 P-LB6832R-02 P-LB6835R-02 P-LB6839R-02* P-LB6843R-02* P-LB6847R-02* P-LB6848R-02* P-LB6851R-02* P-LB6855R-02* P-LB6856R-02* P-LB6859FR-02 P-LB6863FR-02 P-LB6864FR-02 P-LB6867FR-02 P-LB6871FR-02 P-LB6872FR-02 P-LB6879FR-02 P-LB6880FR-02 P-LB6883FR-02 P-LB6887FR-02 P-LB6895FR-02 P-LB6896FR-02 P-LB68103FR-02 P-LB68104FR-02 P-LB68111FR-02 P-LB68112FR-02 P-LB68115FR-02 P-LB68120FR-02 P-LB68127FR-02 P-LB68128FR-02 P-LB66135FR-02 P-LB66136FR-02 P-LB66144FR-02 P-LB66B151FR-02 P-LB66B152FR-02 P-LB66159FR-02 P-LB66160FR-02 P-LB66167FR-02 P-LB66168FR-02

G For variations in type of housing, use prefix: P-LB6839R-02 For construction features, use suffix: P—pillow block, cast iron F — 4-bolt base pillow block PK — pillow block, cast steel, 4-bolt base M4 — Cast steel housing material. E —Expansion mounting; C-spacer not required. C — End closure included K Labyrinth seals, suffix R, are furnished unless otherwise specified. For optional seals, use suffix B for type (4 halves required). ‡ Closed end unit (suffix C) requires one seal and one end closure. * 2-bolt base listed. For 4-bolt base add suffix F; i.e., P-LB6839FR pillow block or P-LB6839FR-02 housing.

E-29


Series 66M00, 68M00 Metric Optional End Closure

Housing

Bearing

Adapter Lockwasher

Pillow block number P-LB68M40R P-LB68M45R P-LB68M50R P-LB68M60R P-LB68M65R* P-LB68M70R* P-LB68M75R* P-LB68M80R* P-LB68M90R* P-LB68M100FR P-LB68M110FR P-LB68M115FR P-LB68M125FR P-LB68M135FR P-LB68M140FR P-LB68M150FR P-LB68M160FR P-LB68M170FR P-LB68M180FR P-LB68M200FR P-LB66M220FR P-LB66M260FR

Shaft diameter mm 40 45 50 60 65 70 75 80 90 100 110 115 125 135 140 150 160 170 180 200 220 260

Spherical roller bearing number

Labyrinth seal number


C-spacer number

22209LBK/W33/C3 22210LBK/W33/C3 22211LBK/W33/C3 22213LBK/W33/C3 22215LBK/W33/C3 22216LBK/W33/C3 22217LBK/W33/C3 22218LBK/W33/C3 22220LBK/W33/C3 22222LBK/W33/C3 22224LBK/W33/C3 22226LBK/W33/C3 22228LBK/W33/C3 22230LBK/W33/C3 22232LBK/W33/C3 22234LBK/W33/C3 22236LBK/W33/C3 22238LBK/W33/C3 22240LBK/W33/C3 22244LBK/W33/C3 23048LBK/W33/C3 23056LBK/W33/C3

LB69M40-3R LB69M45-3R LB69M50-3R LB69M60-3R LB68M65-3R LB68M70-3R LB68M75-3R LB68M80-3R LB68M90-3R LB6863-3R LB68M110-3R LB68M115-3R LB68M125-3R LB68M135-3R LB68M140-3R LB68M150-3R LB68M160-3R LB68M170-3R LB68M180-3R LB68M200-3R LB66M220-3R LB66M260-3R

H309 H310 H311 H313 H315 H316 H317 H318 H320 H322 H3124 H3126 H3128 H3130 H3132 H3134 H3136 H3138 H3140 H3144 H3048 H3056

6824-4 6828-4 6924-4 6932-4 6840-4 6844-4 6948-4 6852-4 6856-4 6864-4 6868-4 6872-4 6880-4 6884-4 6892-4 6896-4 68104-4 68112-4 68116-4 68128-4 66144-4 66168-4

End closure ‡ LB6928-6R LB6928-6R LB6932-6R LB69M60-6R LB68M65-6R LB6844-6R LB6848-6R LB6852-6R LB6856-6R LB6864-6R LB6872-6R LB6872-6R LB6880-6R LB6884-6R LB6888-6R LB6896-6R LB68104-6R LB68112-6R LB68116-6R LB68128-6R LB66144-6R LB66168-6R

Locknut


P-LB68M40R-02 P-LB68M45R-02 P-LB68M50R-02 P-LB68M60R-02 P-LB68M65R-02* P-LB68M70R-02* P-LB68M75R-02* P-LB68M80R-02* P-LB68M90R-02* P-LB68M100FR-02 P-LB68M110FR-02 P-LB68M115FR-02 P-LB68M125FR-02 P-LB68M135FR-02 P-LB68M140FR-02 P-LB68M150FR-02 P-LB68M160FR-02 P-LB68M170FR-02 P-LB68M180FR-02 P-LB68M200FR-02 P-LB66M220FR-02 P-LB66M260FR-02

G For variations in type of housing, use prefix: P-LB68M40R-02 For construction features, use suffix: P—pillow block, cast iron F — 4-bolt base pillow block PK — pillow block, cast steel, 4-bolt base M4 — Cast steel housing material. E —Expansion mounting; C-spacer not required. C — End closure included ‡ Closed end unit (suffix C) requires one seal and one end closure. * 2-bolt base listed. For 4-bolt base add suffix F; i.e., P-LB68M65FR pillow block or P-LB68M65FR-02 housing.

E-30


Series P-LB6900, SAF22600


Housing

Adapter

Locknut

Bearing Lockwasher

Pillow block number P-LB6923R P-LB6924R P-LB6927R P-LB6931R P-LB6932R P-LB6935R* P-LB6939R* P-LB6940R* P-LB6943R* P-LB6947R* SAF22618-303 SAF22620-307 SAF22620-308 SAF22622-315 SAF22622-400 SAF22624-403 SAF22626-407 SAF22628-415 SAF22628-500 SAF22630-503 SAF22632-507 SAF22634-515

Shaft diameter inches 1⁷⁄₁₆ 1¹⁄₂ 1¹¹⁄₁₆ 1¹⁵⁄₁₆ 2 2³⁄₁₆ 2⁷⁄₁₆ 2¹⁄₂ 2¹¹⁄₁₆ 2¹⁵⁄₁₆ 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 3¹⁵⁄₁₆ 4 4³⁄₁₆ 4⁷⁄₁₆ 4¹⁵⁄₁₆ 5 5³⁄₁₆ 5⁷⁄₁₆ 5¹⁵⁄₁₆

Spherical roller bearing number 22309LBK/W33/C3 22310LBK/W33/C3 22311LBK/W33/C3 22313LBK/W33/C3 22315LBK/W33/C3 22316LBK/W33/C3 22317LBK/W33/C3 22318LBK/W33/C3 22320LBK/W33/C3 22322LBK/W33/C3 22324LBK/W33/C3 22326LBK/W33/C3 22328LBK/W33/C3 22330LBK/W33/C3 22332LBK/W33/C3 22334LBK/W33/C3

Labyrinth seal number


LB6923-3R LB6924-3R LB6927-3R LB6931-3RA LB6932-3R L6935-3R LB6839-3RA LB6840-3R LB6843-3RA L6947-3R LB6851-3R LB6855-3RA LB6856-3R LB6863-3RA LB6864-3R LB6867-3R LB6871-3RA LB6879-3R LB6880-3R LB6883-3R LB6887-3R LB6895-3R

SNW109-1⁷⁄₁₆ SNW109-1¹⁄₂ SNW110-1¹¹⁄₁₆ SNW111-1¹⁵⁄₁₆ SNW111-2 SNW113-2³⁄₁₆ SNW115-2⁷⁄₁₆ SNW115-2¹⁄₂ SNW116-2¹¹⁄₁₆ SNW117-2¹⁵⁄₁₆ SNW118-3³⁄₁₆ SNW120-3⁷⁄₁₆ SNW120-3¹⁄₂ SNW122-3¹⁵⁄₁₆ SNW122-4 SNW124-4³⁄₁₆ SNW126-4⁷⁄₁₆ SNW128-4¹⁵⁄₁₆ SNW128-5 SNW130-5³⁄₁₆ SNW132-5⁷⁄₁₆ SNW134-5¹⁵⁄₁₆

C-spacer number 6924-4

LB6924-6R

6928-4

LB6928-6R

6932-4

LB6932-6R

6844-4

LB6936-6R

6852-4

LB6840-6R

6944-4 6856-4 L6956-4

LB6844-6R LB6848-6R LB6852-6R

6868-4

LB6856-6R

6964-4

LB6864-6R

L6968-4 L6972-4

LB6868-6R LB6872-6R

L6980-4

LB6880-6R

L6984-4 L6988-4 L6996-4

LB6884-6R LB6888-6R LB6896-6R

‡ Closed end unit (suffix C) requires one seal and one end closure. * 2-bolt base listed. For 4-bolt base add suffix F; i.e., P-LB6935FR pillow block or P-L6935FR-02 housing.

E-31

End closure ‡


P-LB6923R-02 P-LB6924R-02 P-LB6927R-02 P-LB6931R-02 P-LB6932R-02 P-LB6935R-02* P-LB6939R-02* P-LB6940R-02* P-LB6943R-02* P-LB6947R-02* SAF618-303-02 SAF620-307-02 SAF620-308-02 SAF622-315-02 SAF622-400-02 SAF624-403-02 SAF626-407-02 SAF628-415-02 SAF628-500-02 SAF630-503-02 SAF632-507-02 SAF634-515-02


Series 6600D8, 6800D8 Optional End Closure

Adapter Housing

Pillow block number G P-LB6823D8 P-LB6824D8 P-LB6827D8 P-LB6831D8 P-LB6832D8 P-LB6835D8 P-LB6839D8* P-LB6843D8* P-LB6847D8* P-LB6848D8* P-LB6851D8* P-LB6855D8* P-LB6856D8* P-LB6859FD8 P-LB6863FD8 P-LB6867FD8 P-LB6871FD8 P-LB6879FD8 P-LB6887FD8 P-LB6895FD8 P-LB6896FD8 P-LB68103FD8 P-LB68111FD8 P-LB68112FD8 P-LB68120FD8 P-LB68127FD8 P-LB68128FD8 P-LB66135FD8 P-LB66136FD8 P-LB66144FD8 P-LB66B152FD8 P-LB66168FD8

Shaft diameter inches 1⁷⁄₁₆ 1¹⁄₂ 1¹¹⁄₁₆ 1¹⁵⁄₁₆ 2 2³⁄₁₆ 2⁷⁄₁₆ 2¹¹⁄₁₆ 2¹⁵⁄₁₆ 3 3³⁄₁₆ 3⁷⁄₁₆ 3¹⁄₂ 3¹¹⁄₁₆ 3¹⁵⁄₁₆ 4³⁄₁₆ 4⁷⁄₁₆ 4¹⁵⁄₁₆ 5⁷⁄₁₆ 5¹⁵⁄₁₆ 6 6⁷⁄₁₆ 6¹⁵⁄₁₆ 7 7¹⁄₂ 7¹⁵⁄₁₆ 8 8⁷⁄₁₆ 8¹⁄₂ 9 9¹⁄₂ 10¹⁄₂

Spherical roller bearing number 22209LBK/W33/C3 22210LBK/W33/C3 22211LBK/W33/C3 22213LBK/W33/C3 22215LBK/W33/C3 22216LBK/W33/C3 22217LBK/W33/C3 22218LBK/W33/C3 22220LBK/W33/C3 22222LBK/W33/C3 22224LBK/W33/C3 22226LBK/W33/C3 22228LBK/W33/C3 22232LBK/W33/C3 22234LBK/W33/C3 22236LBK/W33/C3 22238LBK/W33/C3 22244LBK/W33/C3

23048LBK/W33/C3 23056LBK/W33/C3

Type DB Seal assembly number LB6923D8 LB6924D8 LB6927D8 LB6931D8 LB6932D8 LB6935D8 LB6839D8 LB6843D8 LB6847D8 LB6848D8 LB6851D8 LB6855D8 LB6856D8 LB6859D8 LB6863D8 LB6867D8 LB6871D8 LB6879D8 LB6887D8 LB6895D8 LB6896D8 LB68103D8 LB68111D8 LB68112D8 L68120D8 L68127D8 L68128D8 LB66135D8 LB66136D8 LB66144D8 LB66152D8 LB66168D8

Adapter assembly number SNW09-1⁷⁄₁₆ SNW09-1¹⁄₂ SNW10-1¹¹⁄₁₆ SNW11-1¹⁵⁄₁₆ SNW11-2 SNW13-2³⁄₁₆ SNW15-2⁷⁄₁₆ SNW16-2¹¹⁄₁₆ SNW17-2¹⁵⁄₁₆ SNW17-3 SNW18-3³⁄₁₆ SNW20-3⁷⁄₁₆ SNW20-3¹⁄₂ SNW22-3¹¹⁄₁₆ SNW22-3¹⁵⁄₁₆ SNW24-4³⁄₁₆ SNW26-4⁷⁄₁₆ SNW28-4¹⁵⁄₁₆ SNW32-5⁷⁄₁₆ SNW34-5¹⁵⁄₁₆ SNW34-6 SNW36-6⁷⁄₁₆ SNW38-6¹⁵⁄₁₆ SNW38-7 SNW44-7¹⁄₂ SNW44-7¹⁵⁄₁₆ SNW44-8 SNP3048-8⁷⁄₁₆ SNP3048-8¹⁄₂ SNP3048-9 SNP3056-9¹⁄₂ SNP3056-10¹⁄₂

Locknut

Bearing Lockwasher

C-spacer number

End closure ‡

6824-4

LB6924D8-6

6828-4 6924-4

LB6928D8-6 LB6932D8-6

6932-4

LB6936D8-6

6840-4 6844-4

LB6840D8-6 LB6840D8-6

6848-4

LB6848D8-6

6852-4

LB6852D8-6

6856-4

LB6856D8-6

6864-4

LB6868D8-6

6868-4 6872-4 6880-4 6892-4

LB6868D8-6 LB6880D8-6 LB6880D8-6 LB6888D8-6

6896-4

LB68104D8-6

68104-4

LB68104D8-6

68112-4

LB68112D8-6

68128-4

LB68128D8-6

66144-4

LB66144D8-6

66168-4

LB66168D8-6


P-LB6823D8-02 P-LB6824D8-02 P-LB6827D8-02 P-LB6831D8-02 P-LB6832D8-02 P-LB6835D8-02 P-LB6839D8-02* P-LB6843D8-02* P-LB6847D8-02* P-LB6848D8-02* P-LB6851D8-02* P-LB6855D8-02* P-LB6856D8-02* P-LB6859FD8-02 P-LB6863FD8-02 P-LB6867FD8-02 P-LB6871FD8-02 P-LB6879FD8-02 P-LB6887FD8-02 P-LB6895FD8-02 P-LB6896FD8-02 P-LB68103FD8-02 P-LB68111FD8-02 P-LB68112FD8-02 P-LB68120FD8-02 P-LB68127FD8-02 P-LB68128FD8-02 P-LB66135FD8-02 P-LB66136FD8-02 P-LB66144FD8-02 P-LB66B152FD8-02 P-LB66168FD8-02

G For variations in type of housing, use prefix: P-LB6839 D8-02 For construction features, use suffix: P—pillow block, cast iron F — 4-bolt base pillow block PK—pillow block, cast steel, 4-bolt base M4 — Cast steel housing material. E—Expansion mounting; C-spacer not required. ‡ Closed end unit (suffix C) requires one seal and one end closure. * 2-bolt base listed. For 4-bolt base add suffix F; i.e., P-LB6839FD8 pillow block or P-LB6839FD8-02 housing.

E-32


Series 7600, 7800, P-LB7900, SAF22300


Housing Bearing

Series 7600, 7800 Pillow block number

Bore diameter, inches

Spherical roller bearing number

P-LB7875R* P-LB7880R* P-LB7885R* P-LB7890R* P-LB78100R* P-LB78110FR P-LB78120FR P-LB78130FR P-LB78140FR P-LB78150FR P-LB78160FR P-LB78170FR P-LB78180FR P-LB78190FR P-LB78200FR P-LB78220FR P-LB76240FR P-LB76280FR

2.9528 3.1496 3.3465 3.5433 3.9370 4.3307 4.7244 5.1181 5.5118 5.9055 6.2992 6.6929 7.0866 7.4803 7.8740 8.6614 9.4488 11.0236

22215LB/W33/C3 22216LB/W33/C3 22217LB/W33/C3 22218LB/W33/C3 22220LB/W33/C3 22222LB/W33/C3 22224LB/W33/C3 22226LB/W33/C3 22228LB/W33/C3 22230LB/W33/C3 22232LB/W33/C3 22234LB/W33/C3 22236LB/W33/C3 22238LB/W33/C3 22240LB/W33/C3 22244LB/W33/C3 23048LB/W33/C3 23056LB/W33/C3

Labyrinth seal number V1 shaft

V2 shaft

L7875-3R1 L7880-3R1 L7885-3R1 LB6866-3R LB6872-3R LB6878-3R LB68B85-3R L78130-3R1 L78140-3R1 L78150-3R1 LB68112-3R L78170-3R1 LB68125-3R L78190-3R1 L78200-3R1 L78220-3R1 LB66168-3R LB76280-3R1

LB7875-3R2 LB6848-3R L7885-3R2 L7890-3R2 L78100-3R2 LB6867-3R LB78120-3R2 LB6879-3R LB68B85-3R L78150-3R2 LB78160-3R2 LB68103-3R LB68110-3R LB68116-3R L78200-3R2 L78220-3R2 LB76240-3R2 LB76280-3R2

C-spacer number 6840-4 6844-4 6848-4 6852-4 6856-4 6864-4 6868-4 6872-4 6880-4 6884-4 6892-4 6896-4 68104-4 68112-4 68116-4 68128-4 66144-4 66168-4

G For variations in type of housing, use prefix: P-LB7875 -02 P—pillow block, cast iron PK—pillow block, cast steel, 4-bolt base E—Expansion mounting; ‡ Closed end unit (suffix C) requires one seal and one end closure. * 2-bolt base listed. For 4-bolt base add suffix F; i.e., P-LB7875FR pillow block or P-LB7875FR-02 housing.

End closure ‡ LB6844-6R LB6848-6R L7885-6R LB6852-6R L78100-6R LB6868-6R LB6872-6R LB6880-6R LB6884-6R L78150-6R LB6896-6R LB68104-6R LB68112-6R LB68116-6R L78200-6R L78220-6R LB76240-6R LB76280-6R


P-LB7875R-02* P-LB7880R-02* P-LB7885R-02* P-LB7890R-02* P-LB78100R-02* P-LB78110FR-02 P-LB78120FR-02 P-LB78130FR-02 P-LB78140FR-02 P-LB78150FR-02 P-LB78160FR-02 P-LB78170FR-02 P-LB78180FR-02 P-LB78190FR-02 P-LB78200FR-02 P-LB78220FR-02 P-LB76240FR-02 P-LB76280FR-02

For construction features, use suffix: F — 4-bolt base pillow block M4 — Cast steel housing material. C-spacer not required.

Series P-LB7900, SAF22300 Pillow block number P-LB7945R P-LB7950R P-LB7955R* P-LB7965R* P-LB7975R* P-LB7980R* P-LB7985R* SAF22318 SAF22320 SAF22322 SAF22324 SAF22326 SAF22328 SAF22330 SAF22332 SAF22334

Bore diameter, inches 1.7717 1.9685 2.1654 2.5591 2.9528 3.1496 3.3465 3.5433 3.9370 4.3307 4.7244 5.1181 5.5118 5.9055 6.2992 6.6929

Spherical roller bearing number 22309LB/W33/C3 22310LB/W33/C3 22311LB/W33/C3 22313LB/W33/C3 22315LB/W33/C3 22316LB/W33/C3 22317LB/W33/C3 22318LB/W33/C3 22320LB/W33/C3 22322LB/W33/C3 22324LB/W33/C3 22326LB/W33/C3 22328LB/W33/C3 22330LB/W33/C3 22332LB/W33/C3 22334LB/W33/C3

Labyrinth seal number V1 shaft LB6934-3R L7950-3R1 LB7955-3R1 LB7965-3R1 L7875-3R1 L7880-3R1 L7885-3R1 LB6866-3R LB6872-3R LB6878-3R LB68B85-3R L78130-3R1 L78140-3R1 L78150-3R1 LB68112-3R L78170-3R1

V2 shaft LB6927-3R LB6930-3R LB6933-3R LB6839-3RA LB7875-3R2 LB6848-3R L7885-3R2 L7890-3R2 L78100-3R2 LB6867-3R LB78120-3R2 LB6879-3R LB68B85-3R2 L78150-3R2 LB78160-3R2 LB68103-3R

C-spacer number 6924-4 6928-4 6932-4 6844-4 6852-4 6944-4 6856-4 L6956-4 6868-4 6964-4 L6968-4 L6972-4 L6980-4 L6984-4 L6988-4 L6996-4

‡ Closed end unit (suffix C) requires one seal assembly and one end closure. * 2-bolt base listed. For 4-bolt base add suffix F; i.e., P-LB7955FR pillow block or P-L7955FR-02 housing.

E-33

End closure ‡ LB6928-6R LB6932-6R LB6936-6R LB6840-6R LB6844-6R LB6848-6R L7885-6R LB6852-6R L78100-6R LB6868-6R LB6872-6R LB6880-6R LB6884-6R L78150-6R LB6896-6R LB68104-6R


P-LB7945R-02 P-LB7950R-02 P-LB7955R-02* P-LB7965R-02* P-LB7975R-02* P-LB7980R-02* P-LB7985R-02* SAF318-02 SAF320-02 SAF322-02 SAF324-02 SAF326-02 SAF328-02 SAF330-02 SAF332-02 SAF334-02


Series 6600, 6800, 7600, 7800, 22600, 22300 Housing End Closures: All pillow blocks and takeups are available with standard end closures, designated with the suffix C (i.e. PELB6847FRC). The end closure takes the place of one of the seals. For series 7600, 7800 and SAF22300 the end cap fits in the V2 side. On closed end units, shafting should not extend beyond the end of the adapter sleeve or locknut face more than ¹⁄₈".

Pillow Block Mounting: Pillow blocks have cored mounting bolt holes suitable to clear the largest inch or metric bolt shown. Cast slots in pillow blocks are normally ¹⁄₁₆" wider than the specified mounting bolt nominal diameter. It is expected that plain washers will be used under the bolt head to span the slot width and aid torquing. Narrow (N) series washers per ANSI B18.22.1-1981 (previously designated SAE series) are recommended. If wide series washers are used, the full length of the slot may not be usable for positioning the unit.

Replacement Parts: Bearings and seals can be replaced in these units. Replacement parts are listed on pages E-29 through E-33. When replacing bearings, be sure to use one with the same clearance specification.

Metric locknuts and sleeves have different threads than inch locknuts and sleeves, and are not interchangeable.

Operation: Units of these series are not prelubricated. The service instructions packed with each unit of replacement bearing provide guidelines for relubrication intervals and recommended lubricants. The type A or B felt seal should be limited to temperature less than 225°F (107°C) and to grease lubrication only. These pillow blocks are designed for use with grease, static oil or circulating oil lubrication. With circulation systems, the standard drain holes will probably require enlarging. Where significant thrust loads must be carried by adapter mounted bearings, the use of shaft shoulder rings is recommended to transmit the thrust from the bearings to the shaft. Consult Link-Belt Bearing Division. Imposed radial loads should not exceed .25C. Where high radial loads, high speeds, thrust loads or vibratory loads are unavoidable, consult the Link-Belt Bearing Division.

Spherical roller bearings with other than standard clearance (C3) are frequently required due to application conditions. The nomenclature page (E-27) shows bearing clearance specifications. Spherical roller bearing clearances are listed on pages F-15 and F-16.

Takeups: Pillow blocks can be mounted on type LHD universal takeup frames illustrated on page E-25. Protected screw takeups type DS-LB6800 are on page E-26.

Fixed and Expansion Units: Important: The application of these spherical roller bearing units requires the use of one fixed and one expansion mounting on a shaft. For fixed pillow blocks, spacer rings are used which move the bearing to one side of the pillow block center line. Bearings should be centered in expansion units during mounting unless special application conditions dictate otherwise. To avoid premature failure, care should be taken not to force the bearings to thrust against or away from each other during mounting or operation. Expansion units are designated by adding the prefix "E". Example—PE-LB6863FR.

Shaft Fits and Tolerances: For direct shaft mounted units Series 7600, 7800, 7900, and 22300 refer to Shaft Bearing Seat Diameters pages F-11 and F-12. Shaft diameters for V1 and V2 shafts on 7600, 7800, 7900, and 22300 series and for adapter mounted units should be held to the following regular commercial tolerances: Shaft Diameter

Recommended Tolerance

… through 2" 2¹⁄₁₆" through 4" 4¹⁄₁₆" through 6" 6¹⁄₁₆" through 13"

Nominal to –.003" (–0.07 mm) Nominal to –.004" (–0.10 mm) Nominal to –.005" (–0.13 mm) Nominal to –.006" (–0.15 mm)

Warning: The correct selection of bearings or mounted units requires that the magnitude and nature of all loads, speeds, alignment, mounting, operating requirements, and maintenance be adequately considered. The selection of materials for and design of housings, shafting, fasteners, seals, and accessories, as well as provisions for installation and maintenance, must follow good engineering principles. Housings must be selected and installed with regard to the degree and direction of the forces that will occur. Housings

should not be used under tension loads except with adequate safety factors. For this reason pillow blocks are best suited to withstand radial loads ing through the base. When heavy loads or shock loads are possible, it is most important to mount a unit so that the unit is directly and substantially ed other than through its mounting bolts. Where the line of force falls outside the base, such as with horizontal or uplift loads on pillow blocks, serious housing and fastener deflection or failure may occur. These conditions may require designs using different materials, fasteners, mounting

design, stop bars, etc., together with proper safety factors. When these conditions are unavoidable Link-Belt Bearing Division, Rexnord Corp. should be consulted. Service instructions are provided with shipments of bearings and are available on request. These instructions provide detailed information to aid in the proper installation, operation, and maintenance, and should be carefully read and followed. Failure to do so may result in unsatisfactory service as well as serious personal injury or property damage. E-34


Contents Series 22200, 22300, 23000, 23100, 23200 Introduction .................................... F-1 Selection ........................................ F-3 Load Ratings .................................. F-5 Dimensions .................................... F-7 Shaft Diameters ........................... F-11 Housing Diameters ...................... F-13 Radial Clearances ........................ F-15 Additional Information .................. F-17 Nomenclature ............................... F-18

Series 22200, 22300, 23000 Spherical Roller Bearings Self-aligning and self-contained spherical roller bearings provide high capacity for heavy-duty and high-precision applications. They are used extensively on earthmoving equipment, vibrating screens, steel mill and paper mill equipment, embossing rolls, printing presses, and torque converters.

a

b

c

d

e

F-1

a Positive roller guidance is provided from rugged retainer design. b Large high-capacity rollers for extended bearing life. c Controlled raceway curvatures afford precise osculation clearance preventing roller edge loading. d Micro-finished raceways assure smooth operation. e Outer ring groove and three symmetrically spaced holes for maximum lubrication access.


Series 22200, 22300, 23000

Spherical Roller Bearings 22200LB, 22200LBK Double-row self-aligning spherical roller bearings with cylindrical or tapered bores for direct shaft mounting. Available with bores from 45 mm, (1.7717") to 220 mm, (8.6614"), inclusive. 22200LBK with Adapter Assembly Double-row self-aligning spherical roller bearings with tapered bores for adapter mounting. Available for shaft sizes 1⁷⁄₁₆" through 8". Load ratings on page F-5. Dimensions on pages F-7 and F-8. Additional information on page F-17.

Spherical Roller Bearings 22300LB, 22300LBK Double-row self-aligning spherical roller bearings with cylindrical or tapered bores for direct shaft mounting. Available with bores 40 mm, (1.5748") to 220 mm, (8.6614"), inclusive. 22300LBK with Adapter Assembly Double-row self-aligning spherical roller bearings with tapered bores for adapter mounting. Available for shaft sizes 1³⁄₁₆" through 7¹⁵⁄₁₆". Load ratings on page F-6. Dimensions on pages F-9 and F-10. Additional information on pages F-17.

Spherical Roller Bearings 23000LB, 23000LBK Double-row self-aligning spherical roller bearings with cylindrical or tapered bores for direct shaft mounting. Available with bores from 120 mm, (4.7244") to 300 mm, (11.8110"), inclusive. 23000LBK with Adapter Assembly Double-row self-aligning spherical roller bearings with tapered bores for adapter mounting. Available for shaft sizes 4³⁄₁₆" through 11". Load ratings, consult Link-Belt Bearings Division. Dimensions on pages F-9 and F-10. Additional information on page F-17.

F-2

Selection

Series 22200, 22300, 23000 To select a bearing, determine the applied radial load, the applied thrust load, the desired Rating Life, and applicable operating conditions. The procedure shown here will aid in selecting a bearing to meet an L₁₀ design life. The formulas for calculating life expectancy should be used to determine the Rating Life L₁₀ for the bearing selected. Spherical roller bearings are available in five series with cylindrical bores for direct shaft mounting and tapered bores for direct shaft or

adapter mounting. Bearings in several series may fulfill the L₁₀ life requirements. However, speed limit, minimum shaft diameter, thrust load, and space limitations may be determining factors in final selection. The selection procedures and rating formulas shown here are in agreement with The American Bearing Manufacturers Association Standards and ANSI/ABMA Standards STD 11-1990. Ratings are

Bearing Selection Step 1 Determine an appropriate L₁₀ design life. Operating time, Type of service hours per year Heavy seasonal usage Industrial—8 hour shift Industrial—16 hour shift Industrial—continuous Industrial—High reliability Step 2 Determine a required

1,400 to 1,600 2,000 4,000 8,700 —

Design life, years

L₁₀ design life, hours

4-6 8,000 10 20,000 10 40,000 10 80,000 to 100,000 — 120,000 to 300,000

from Table 1.

Step 3 Calculate the required C and select a spherical roller bearing. a For radial load only: P = Fr required C =

P using

from Step 2

Select a spherical roller bearing having a basic load rating C equal to or greater than the required C from the appropriate series. b For combined radial and thrust loads: Select a spherical roller bearing with the appropriate characteristics and the desired shaft size, pages F-7 thru F-10. Calculate the ratio of thrust load Fa to the radial load Fr.

Calculate the equivalent radial load P P = XFr + YFa If


If


For values of e, X1, Y1, X2, and Y2, consult the appropriate bearing rating tables, pages F-5 and F-6. Calculate the required C required C =

P using

from Step 2

Consult the bearing rating table to see if the selected bearing meets or exceeds the required C. The life expectancy of the selected bearing or other sizes and series of bearings can be calculated. F-3

based on fatigue life. The Rating Life L₁₀ or fatigue life at 90% reliability is the usual basis for bearing selection. To assure a satisfactory bearing application, fitting practice, mounting, lubrication, sealing, static rating, housing strength, operating conditions and maintenance must be considered.

Selection

Series 22200, 22300, 23000

C Co e Fa Fr L₁₀ n P X Y

= = = = = = = = = =

symbols for formulas: basic load rating, pounds (or newtons) static load rating, pounds (or newtons) a reference value thrust load, pounds (or newtons) radial load, pounds (or newtons) rating life, hours speed, revolutions per minute equivalent radial load, pounds (or newtons) radial factor thrust factor

basic formulas: = L₁₀ u n u 60 1,000,000

3/10

10/3

L₁₀ =

u1,000,000 n u 60



Step 1 Determine the equivalent radial load P. ratio


Speed, n 50

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

a

1.93 2.11 2.25 2.38 2.59 2.77 2.93 3.07 3.19 3.31 3.42 3.65 3.86 4.04 4.20 4.36 4.50 4.75 4.97 5.18 5.36 5.54 6.25 6.81

P = Fr

200

300

400

500

600

700

800

b For combined radial and thrust load:

2.38 2.93 2.59 3.19 2.77 3.42 2.93 3.61 3.19 3.93 3.42 4.20 3.61 4.44 3.78 4.65 3.93 4.84 4.07 5.02 4.20 5.18 4.50 5.54 4.75 5.85 4.97 6.12 5.18 6.37 5.36 6.60 5.54 6.81 5.85 7.20 6.12 7.54 6.37 7.85 6.60 8.13 6.81 8.39 7.70 9.48 8.39 10.30

3.31 3.61 3.86 4.07 4.44 4.75 5.02 5.25 5.47 5.66 5.85 6.25 6.60 6.92 7.20 7.46 7.70 8.13 8.51 8.86 9.18 9.48 10.70 11.70

3.61 3.93 4.20 4.44 4.84 5.18 5.47 5.73 5.96 6.18 6.37 6.81 7.20 7.54 7.85 8.13 8.39 8.86 9.28 9.66 10.00 10.30 11.70 12.70

3.86 4.20 4.50 4.75 5.18 5.54 5.85 6.12 6.37 6.60 6.81 7.29 7.70 8.06 8.39 8.69 8.97 9.48 9.92 10.30 10.70 11.00 12.50 13.60

4.07 4.44 4.75 5.02 5.47 5.85 6.18 6.47 6.73 6.97 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.00 10.50 10.90 11.30 11.70 13.20 14.40

4.27 4.65 4.97 5.25 5.73 6.12 6.47 6.77 7.05 7.30 7.54 8.06 8.51 8.92 9.28 9.61 9.92 10.50 11.00 11.40 11.80 12.20 13.80 15.00

4.44 4.84 5.18 5.47 5.96 6.37 6.73 7.05 7.34 7.60 7.85 8.39 8.86 9.28 9.66 10.00 10.30 10.90 11.40 11.90 12.30 12.70 14.40 15.70

P = XF r + YF a

100

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

4.60 5.02 5.36 5.66 6.18 6.60 6.97 7.30 7.60 7.88 8.13 8.69 9.18 9.61 10.00 10.40 10.70 11.30 11.80 12.30 12.80 13.20 14.90 16.20

1000 1200 1500 1800 2400 3000

3600 6000

4.75 5.18 5.54 5.85 6.37 6.81 7.20 7.54 7.85 8.13 8.39 8.97 9.48 9.92 10.30 10.70 11.00 11.70 12.20 12.70 13.20 13.60 15.40 16.70

6.97 7.60 8.13 8.59 9.36 10.00 10.60 11.10 11.50 11.90 12.30 13.20 13.90 14.60 15.20 15.70 16.20 17.10 17.90 18.70 19.40 20.00 22.60 24.60

5.02 5.47 5.85 6.18 6.73 7.20 7.60 7.96 8.29 8.59 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.30 12.90 13.40 13.90 14.40 16.20 17.70

5.36 5.85 6.25 6.60 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.10 10.70 11.20 11.70 12.10 12.50 13.20 13.80 14.40 14.90 15.40 17.30 18.90

5.66 6.18 6.60 6.97 7.60 8.13 8.59 8.99 9.36 9.70 10.00 10.70 11.30 11.80 12.30 12.80 13.20 13.90 14.60 15.20 15.70 16.20 18.30 20.00

If


If


For values of e, X1, Y1, X2, and Y2, consult the appropriate bearing rating table, pages F-5 thru F-6. Step 2 Calculate the ratio of the basic load rating C to the equivalent radial load. C P Step 3 Approximate the bearing life from Table 1.

Life Adjustment

Speed, n 900


6.18 6.73 7.20 7.60 8.29 8.86 9.36 9.80 10.20 10.60 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.20 15.90 16.50 17.10 17.70 20.00 21.80

6.60 7.20 7.70 8.13 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.50 13.20 13.80 14.40 14.90 15.40 16.20 17.00 17.70 18.30 18.90 21.40 23.30

8.13 8.86 9.48 10.00 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.40 16.20 17.00 17.70 18.30 18.90 20.00 20.90 21.80 22.60 23.30 26.30 28.70


Ln = a₁a₂a₃L₁₀ ,

Ln = Adjusted life for (100-n) % reliablility, a₁ = Life adjustment factor for reliability a₂ = Life adjustment factor for material and processing a₃ = Life adjustment factor for operating conditions. For most normal applications, all factors will be taken as 1, and the Rating Life used as the selection basis or life estimate. In addition, as long as standard catalog bearings are used, a₂ will be normally set equal to one. The factor a₃ covers such things as lubrication, misalignment, and temperature. Some conditions that could yield a₃ significantly different than unity include speeds less than 20000 DN or greater than 200000 DN, temperatures below –40°F (–40°C) or above 275°F (135°C). For other possible conditions, as well as additional information on life adjustment factors, consult Link-Belt Bearing Division, Rexnord Corp. F-4

where

Load Ratings

Series 22200LB, 22200LBK

23000

22200

22300

Size Relationship

Load ratings and speed limits Bearing number Cylindrical bore

Tapered bore


C Basic load rating

Speed Limit, rpm

pounds

newtons

pounds

Grease

Oil

l= e

e X₁

Y₁

X₂

Y₂

22209LB 22210LB 22211LB 22212LB

22209LBK 22210LBK 22211LBK 22212LBK

105000 113000 145000 180000

23600 25500 32500 40500

92500 97900 120000 151000

20800 22000 27000 34000

5300 5000 4500 4000

6200 5500 5000 4500

.26 .26 .23 .24

1.00 1.00 1.00 1.00

2.6 2.8 2.9 2.8

.67 .67 .67 .67

3.9 4.2 4.4 4.2

22213LB 22214LB 22215LB 22216LB

22213LBK 22214LBK 22215LBK 22216LBK

207000 222000 236000 260000

46500 50000 53000 58500

169000 178000 185000 207000

38000 40000 41500 46500

3800 3600 3400 3200

4300 4000 3700 3500

.24 .23 .22 .22

1.00 1.00 1.00 1.00

2.8 2.9 3.1 3.1

.67 .67 .67 .67

4.2 4.4 4.6 4.7

22217LB 22218LB 22219LB 22220LB

22217LBK 22218LBK 22219LBK 22220LBK

327000 363000 400000 463000

73500 81500 90000 104000

260000 285000 316000 356000

58500 64000 71000 80000

3000 2600 2400 2200

3250 3000 2900 2800

.22 .23 .24 .24

1.00 1.00 1.00 1.00

3.0 2.9 2.9 2.8

.67 .67 .67 .67

4.5 4.3 4.3 4.2

22222LB 22224LB 22226LB 22228LB

22222LBK 22224LBK 22226LBK 22228LBK

587000 725000 872000 1010000

132000 163000 196000 228000

454000 534000 636000 738000

102000 120000 143000 166000

2000 1900 1800 1700

2500 2300 2100 1950

.25 .25 .26 .25

1.00 1.00 1.00 1.00

2.7 2.7 2.6 2.7

.67 .67 .67 .67

4.0 4.0 3.9 4.0

22230LB 22232LB 22234LB 22236LB

22230LBK 22232LBK 22234LBK 22236LBK

1200000 1380000 1530000 1620000

270000 310000 345000 365000

845000 961000 1110000 1130000

190000 216000 250000 255000

1600 1500 1300 1300

1850 1700 1600 1500

.25 .26 .26 .25

1.00 1.00 1.00 1.00

2.7 2.6 2.6 2.7

.67 .67 .67 .67

4.0 3.9 3.9 4.0

22238LB 22240LB 22244LB

22238LBK 22240LBK 22244LBK

1850000 2000000 2450000

415000 450000 550000

1200000 1330000 1620000

270000 300000 365000

1200 1100 1000

1400 1300 1200

.28 .29 .29

1.00 1.00 1.00

2.4 2.3 2.3

.67 .67 .67

3.6 3.5 3.5

If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp. Speed limits are based on the following: 1. Negligible seal torque (e.g., non- seals) 2. Proper operating internal clearance. 3. Adequate lubrication and maintenance (special lubricants and/or more frequent relubrication may be required). 4. Normal room temperature environment and no extraneous heat sources, such that bearing operating temperature does not exceed 100°C (212°F). 5. Equivalent radial load not greater than 7% of C. 6. Axial load, if any, not greater than 20% of radial load. Additional information, page F-17.

F-5

Le

Load Ratings

Series 22300LB, 22300LBK

23000

22200

22300

Size Relationship

Load ratings and speed limits Bearing number Cylindrical bore

Tapered bore


C Basic load rating

pounds

newtons

Speed Limit, rpm

pounds

Grease

Oil

l= e

e

Le

X₁

Y₁

X₂

Y₂

22308LB 22309LB 22310LB 22311LB

22308LBK 22309LBK 22310LBK 22311LBK

145000 178000 214000 254000

32500 40000 48000 57000

129000 158000 189000 222000

29000 35500 42500 50000

4500 3800 3600 3200

5600 4800 4300 4000

.36 .36 .36 .36

1.00 1.00 1.00 1.00

1.9 1.9 1.9 1.9

.67 .67 .67 .67

2.8 2.8 2.8 2.8

22312LB 22313LB 22314LB 22315LB

22312LBK 22313LBK 22314LBK 22315LBK

302000 356000 378000 436000

68000 80000 85000 98000

260000 291000 320000 369000

58500 65500 72000 83000

3000 2600 2400 2200

3800 3400 3200 3000

.35 .34 .34 .34

1.00 1.00 1.00 1.00

1.9 2.0 2.0 2.0

.67 .67 .67 .67

2.8 3.0 3.0 3.0

22316LB 22317LB 22318LB 22319LB

22316LBK 22317LBK 22318LBK 22319LBK

498000 543000 623000 681000

112000 122000 140000 153000

414000 454000 507000 556000

93000 102000 114000 125000

2000 1900 1800 1800

2800 2600 2400 2400

.34 .33 .33 .33

1.00 1.00 1.00 1.00

2.0 2.0 2.0 2.0

.67 .67 .67 .67

3.0 3.0 3.0 3.0

22320LB 22322LB 22324LB 22326LB

22320LBK 22322LBK 22324LBK 22326LBK

814000 1050000 1160000 1360000

183000 236000 260000 305000

649000 801000 907000 1050000

146000 180000 204000 236000

1700 1600 1400 1300

2200 2000 1800 1700

.34 .33 .33 .33

1.00 1.00 1.00 1.00

2.0 2.1 2.1 2.1

.67 .67 .67 .67

3.0 3.1 3.1 3.1

22328LB 22330LB 22332LB 22334LB

22328LBK 22330LBK 22332LBK 22334LBK

1600000 1800000 1890000 2110000

360000 405000 425000 475000

1220000 1380000 1450000 1600000

275000 310000 325000 360000

1100 1000 950 950

1500 1400 1300 1300

.34 .33 .37 .37

1.00 1.00 1.00 1.00

2.0 2.0 1.8 1.8

.67 .67 .67 .67

3.0 3.0 2.7 2.7

22336LB 22338LB 22340LB 22344LB

22336LBK 22338LBK 22340LBK 22344LBK

2360000 2540000 2800000 3340000

530000 570000 630000 750000

1730000 1850000 2070000 2360000

390000 415000 465000 530000

900 850 850 700

1200 1100 1100 900

.37 .37 .36 .35

1.00 1.00 1.00 1.00

1.8 1.8 1.9 2.0

.67 .67 .67 .67

2.7 2.7 2.8 2.9

If the load P is greater than .25C, consult Link-Belt Bearing Division, Rexnord Corp. Speed limits are based on the following: 1. Negligible seal torque (e.g., non- seals) 2. Proper operating internal clearance. 3. Adequate lubrication and maintenance (special lubricants and/or more frequent relubrication may be required). 4. Normal room temperature environment and no extraneous heat sources, such that bearing operating temperature does not exceed 100°C (212°F). 5. Equivalent radial load not greater than 7% of C. 6. Axial load, if any, not greater than 20% of radial load. Additional information, page F-17.

F-6


22200LB, 22200LBK Cylindrical or Tapered Bore Roller Riding Retainers Self-aligning High Capacity

Cylindrical bore

Tapered bore

Dimensions A

Bearing number

Bore diameter

Outside diameter

Width

Cylindrical bore

Tapered bore +

22209LB 22210LB 22211LB 22212LB

22209LBK 22210LBK 22211LBK 22212LBK

45.000 50.000 55.000 60.000

1.7717 1.9685 2.1654 2.3622

85.000 90.000 100.000 110.000

3.3465 3.5433 3.9370 4.3307

23.000 23.000 25.000 28.000

22213LB 22214LB 22215LB 22216LB

22213LBK 22214LBK 22215LBK 22216LBK

65.000 70.000 75.000 80.000

2.5591 2.7559 2.9528 3.1496

120.000 125.000 130.000 140.000

4.7244 4.9213 5.1181 5.5118

22217LB 22218LB 22219LB 22220LB

22217LBK 22218LBK 22219LBK 22220LBK

85.000 90.000 95.000 100.000

3.3465 3.5433 3.7402 3.9370

150.000 160.000 170.000 180.000

22222LB 22224LB 22226LB 22228LB

22222LBK 22224LBK 22226LBK 22228LBK

110.000 120.000 130.000 140.000

4.3307 4.7244 5.1181 5.5118

22230LB 22232LB 22234LB 22236LB

22230LBK 22232LBK 22234LBK 22236LBK

150.000 160.000 170.000 180.000

22238LB 22240LB 22244LB

22238LBK 22240LBK 22244LBK

190.000 200.000 220.000

mm

D Shaft shoulder diameter min.

C

B

R Housing & shaft fillet radius#

Unit weight

mm

in.

mm

in.

mm

in.

lbs.

.9055 .9055 .9843 1.1024

53 58 65 70

2.1 2.3 2.6 2.8

77 82 91 101

3.0 3.2 3.6 4.0

1.00 1.00 1.50 1.50

.039 .039 .059 .059

1.3 1.4 1.9 2.6

31.000 31.000 31.000 33.000

1.2205 1.2205 1.2205 1.2992

74 79 84 90

2.9 3.1 3.3 3.5

111 116 121 129

4.4 4.6 4.8 5.1

1.50 1.50 1.50 2.00

.059 .059 .059 .079

3.4 3.7 3.9 4.9

5.9055 6.2992 6.6929 7.0866

36.000 40.000 43.000 46.000

1.4173 1.5748 1.6929 1.8110

95 100 107 112

3.7 3.9 4.2 4.4

139 149 157 167

5.5 5.9 6.2 6.6

2.00 2.00 2.00 2.00

.079 .079 .079 .079

6.1 7.6 9.5 11.4

200.000 215.000 230.000 250.000

7.8740 8.4646 9.0551 9.8425

53.000 58.000 64.000 68.000

2.0866 2.2835 2.5197 2.6772

122 132 144 154

4.8 5.2 5.7 6.1

187 203 217 236

7.4 8.0 8.5 9.3

2.00 2.00 2.50 2.50

.079 .079 .098 .098

16.6 20.2 25.1 32.4

5.9055 6.2992 6.6929 7.0866

270.000 290.000 310.000 320.000

10.6299 11.4173 12.2047 12.5984

73.000 80.000 86.000 86.000

2.8740 3.1496 3.3858 3.3858

164 174 188 199

6.5 6.9 7.4 7.8

256 276 293 303

10.1 10.9 11.5 11.9

2.50 2.50 3.00 3.00

.098 .098 .118 .118

40.9 52.0 64.6 67.4

7.4803 7.8740 8.6614

340.000 360.000 400.000

13.3858 14.1732 15.7480

92.000 98.000 108.000

3.6220 3.8583 4.2520

209 218 239

8.2 8.6 9.4

322 342 383

12.7 13.5 15.1

3.00 3.00 3.00

.118 .118 .118

81.9 95.0 133.0

in.

mm

in.

mm

in.

Bold face items are normally available from stock; please consult for availability of non-stock items. + Tapered bore, 1:12 on diameter. # Largest fillet radius that will clear bearing corners. Selection guide, pages F-3, F-4. Load ratings, page F-5. Additional information, page F-17. Shaft and housing bearing seat diameters, pages F-11 through F-14.

F-7

E Housing shoulder diameter max.


22200LBK Adapter Mounted Roller Riding Retainers Self-aligning High Capacity

SNW adapter assembly

Tapered bore bearing with SNW adapter assembly

Adapter assembly dimensions Bearing number


Tapered bore +

22209LBK 22210LBK 22211LBK 22212LBK

H309023, H309024 H310027, H310028 H311031, H311032 .......

22213LBK 22214LBK 22215LBK 22216LBK

H313035 ....... H315039 H316043

22217LBK 22218LBK 22219LBK 22220LBK

V Shaft diameter

L

F

M

Adapter weight

in.

mm

in.

mm

in.

mm

in.

lbs.

1⁷⁄₁₆, 1¹⁄₂ 1¹¹⁄₁₆, 1³⁄₄ 1¹⁵⁄₁₆, 2 ....

65.0 70.0 75.0

2.56 2.76 2.95 ....

11.3 12.3 12.5

.44 .48 .49 ....

39.0 42.0 45.0

1.54 1.65 1.77 ....

.7 .8 .9 —

13.5

50.0

14.5 16.8

.53 .... .57 .66

55.0 59.0

1.97 .... 2.16 2.32

1.5 — 2.4 2.4

....

85.0

....

....

2³⁄₁₆ .... 2⁷⁄₁₆ 2¹¹⁄₁₆

95.0 105.0

3.35 .... 3.86 4.13

H317047, H317048 H318051 SNW19-3⁵⁄₁₆ H320055, H320056

2¹⁵⁄₁₆, 3 3³⁄₁₆ 3⁵⁄₁₆ 3⁷⁄₁₆, 3¹⁄₂

110.0 120.0 125.4 130.0

4.33 4.72 4.94 5.12

17.8 17.8 21.0 19.8

.70 .70 .83 .78

63.0 65.0 70.2 71.0

2.48 2.56 2.77 2.80

3.0 3.2 3.5 4.4

3¹¹⁄₁₆ 3¹⁵⁄₁₆, 4 4³⁄₁₆ 4⁷⁄₁₆, 4¹⁄₂ 4¹⁵⁄₁₆, 5

145.0

5.71

20.8

.82

74.0

3.03

5.0

22224LBK 22226LBK 22228LBK

H322059 H322063, H322064 H3124067 H3126071, H3126072 H3128079, H3128080

155.0 165.0 180.0

6.10 6.50 7.09

22.0 23.0 24.0

.87 .91 .94

92.0 92.0 97.0

3.46 3.62 3.82

6.9 8.8 10.2

22230LBK 22232LBK 22234LBK 22236LBK

H3130083 H3132087 H3134095, H3134096 H3136103

5³⁄₁₆ 5⁷⁄₁₆ 5¹⁵⁄₁₆, 6 6⁷⁄₁₆

195.0 210.0 220.0 230.0

7.68 8.27 8.66 9.06

26.0 27.5 28.5 29.5

1.02 1.08 1.12 1.16

111.0 119.0 122.0 131.0

4.37 4.68 4.80 5.16

13.2 15.7 17.8 17.6

22238LBK 22240LBK

H3138111, H3138112 H3140115 H3144120, H3144127 SNW44-8

6¹⁵⁄₁₆, 7 7³⁄₁₆ 7¹⁄₂, 7¹⁵⁄₁₆ 8

240.0 250.0 280.0 279.4

9.45 9.84 11.02 11.00

30.5 31.5 35.0 36.1

1.20 1.24 1.38 1.42

141.0 150.0 161.0 150.0

5.55 5.91 6.34 5.91

18.6 30.0 33.0 31.0

22222LBK

22244LBK

....

....

....

Bold face items are normally available from stock; please consult for availability of non-stock items. + Tapered bore, 1:12 on diameter. Selection guide, pages F-3, F-4. Load ratings, page F-5. Additional information, page F-17. Housing bearing seat diameters, pages F-13 and F-14.

F-8


22300LB, 22300LBK, 23000LB, 23000LBK Cylindrical or Tapered Bore Roller Riding Retainers Self-aligning Extra High Capacity

Cylindrical bore

Tapered bore

Dimensions A

Bearing number

Cylindrical bore

Tapered bore +

Bore diameter mm

D Shaft shoulder diameter min.

C

B Outside diameter

Width

in.

mm

in.

mm

in.

mm

in.

E Housing shoulder diameter max. mm

in.

R Housing & shaft fillet radius# mm

in.

22308LB22308LBK 22309LB22309LBK 22310LB22310LBK 22311LB22311LBK

40.000 45.000 50.000 55.000

1.5748 1.7717 1.9685 2.1654

90.000 100.000 110.000 120.000

3.5433 3.9370 4.3307 4.7244

33.000 36.000 40.000 43.000

1.2992 1.4173 1.5748 1.6929

49 55 60 66

1.9 2.2 2.4 2.6

81 91 100 110

3.2 3.6 3.9 4.3

1.50 1.50 2.00 2.00

.059 .059 .079 .079

2.8 3.1 4.0 5.2


60.000 65.000 70.000 75.000

2.3622 2.5591 2.7559 2.9528

130.000 140.000 150.000 160.000

5.1181 5.5118 5.9055 6.2992

46.000 48.000 51.000 55.000

1.8110 1.8898 2.0079 2.1654

73 78 83 88

2.9 3.1 3.3 3.5

118 128 138 148

4.6 5.0 5.4 5.8

2.00 2.00 2.00 2.00

.079 .079 .079 .079

6.6 7.9 9.8 11.9


80.000 85.000 90.000 95.000

3.1496 3.3465 3.5433 3.7402

170.000 180.000 190.000 200.000

6.6929 7.0866 7.4803 7.8740

58.000 60.000 64.000 67.000

2.2835 2.3622 2.5197 2.6378

93 100 104 109

3.7 3.9 4.1 4.3

157 166 176 186

6.2 6.5 6.9 7.3

2.00 2.50 2.50 2.50

.079 .098 .098 .098

14.1 16.3 19.5 22.6

22320LB22320LBK100.000 22322LB22322LBK110.000 22324LB22324LBK120.000 22326LB22326LBK130.000

3.9370 4.3307 4.7244 5.1181

215.000 240.000 260.000 280.000

8.4646 9.4488 10.2362 11.0236

73.000 80.000 86.000 93.000

2.8740 3.1496 3.3858 3.6614

115 124 135 149

4.5 4.9 5.3 5.9

201 226 246 262

7.9 8.9 9.7 10.3

2.50 2.50 2.50 3.00

.098 .098 .098 .118

28.9 40.0 49.0 62.5

22328LB22328LBK140.000 22330LB22330LBK150.000 22332LB22332LBK160.000 22334LB22334LBK 170.000

5.5118 5.9055 6.2992 6.6929

300.000 320.000 340.000 360.000

11.8110 12.5984 13.3858 14.1732

102.000 108.000 114.000 120.000

4.0157 4.2520 4.4882 4.7244

159 169 180 188

6.3 6.6 7.1 7.4

283 303 322 342

11.1 11.9 12.7 13.5

3.00 3.00 3.00 3.00

.118 .118 .118 .118

78.2 92.0 110.0 129.0

22336LB22336LBK180.000 22338LB22338LBK190.000 22340LB22340LBK 200.000 22344LB22344LBK 220.000

7.0866 7.4803 7.8740 8.6614

380.000 400.000 420.000 460.000

14.9606 15.7480 16.5354 18.1102

126.000 132.000 138.000 145.000

4.9606 5.1968 5.4331 5.7087

199 213 223 243

7.8 8.4 8.8 9.6

363 379 399 439

14.3 14.9 15.7 17.3

3.00 4.00 4.00 4.00

.118 .157 .157 .157

153.0 176.0 200.0 287.0

240.000 280.000 300.000

9.4488 11.0236 11.8110

360.000 420.000 460.000

14.1732 16.5354 18.1102

92.000 106.000 118.000

3.6220 4.1732 4.6457

254 299 319

10.0 11.8 12.6

346 402 443

13.6 15.8 17.4

2.50 3.00 3.00

.098 .118 .118

23048LBJ 23056LBJ 23060LBJ

23048LBKJ 23056LBKJ 23060LBKJ

Bold face items are normally available from stock; please consult for availability of non-stock items. + Tapered bore, 1:12 on diameter. # Largest fillet radius that will clear bearing corners. Selection guide, pages F-3, F-4. Load ratings, page F-6. J Load ratings, consult Link-Belt Bearing Division, Rexnord Corp. Additional information, page F-17. Shaft and housing bearing seat diameters, pages F-11 through F-14.

F-9

Unit weight lbs.

74.6 117.6 163.3


22300LBK, 23000LBK Adapter Mounted Roller Riding Retainers Self-aligning Extra High Capacity

SNW adapter assembly

Tapered bore bearing with SNW adapter assembly

Adapter assembly dimensions Bearing number Tapered bore + 22308LBK

Adapter assembly number (

V Shaft diameter in.

L

F max.

M

Adapter weight

mm

in.

mm

in.

mm

in.

lbs.

SNW108 H2309023 SNW109 H2310027 SNW111 H2311032

1³⁄₁₆ 1⁷⁄₁₆ 1¹⁄₂ 1¹¹⁄₁₆ 1¹⁵⁄₁₆ 2

57.2 65.0 64.3 70.0 75.4 75.0

2.25 2.56 2.53 2.76 2.97 2.95

13.1 11.3 13.1 12.3 14.7 12.5

.52 .44 .52 .48 .58 .49

51.2 50.0 54.4 55.0 63.9 59.0

2.02 1.97 2.14 2.16 2.52 2.32

1.3 1.4 1.4 1.8 2.4 2.4

22312LBK 22313LBK 22314LBK 22315LBK

SNW112 H2313035 SNW114 H2315039, H2315040

2¹⁄₁₆ 2³⁄₁₆ 2⁵⁄₁₆ 2⁷⁄₁₆, 2¹⁄₂

80.2 85.0 92.1 95.0

3.16 3.35 3.62 3.86

15.5 13.5 16.3 14.5

.61 .53 .64 .57

67.5 65.0 74.6 73.0

2.66 2.56 2.94 3.87

3.0 3.6 4.4 5.4

22316LBK 22317LBK 22318LBK 22319LBK

H2316043 H2317047 H2318051 SNW119

2¹¹|₁₆ 2¹⁵⁄₁₆ 3³⁄₁₆ 3⁵⁄₁₆

105.0 110.0 120.0 125.4

4.13 4.33 4.72 4.94

16.8 17.8 17.8 21.0

.66 .70 .70 .83

78.0 82.0 86.0 94.0

3.07 3.23 3.39 3.70

6.4 7.4 8.8 10.2

22324LBK 22326LBK

H2320055 SNW120 H2322063 SNW122 SNW124 SNW126

3⁷⁄₁₆ 3¹⁄₂ 3¹⁵⁄₁₆ 4 4³⁄₁₆ 4⁷⁄₁₆

130.0 131.8 145.0 145.2 155.6 171.4

5.12 5.19 5.71 5.72 6.12 6.75

19.8 21.8 20.8 23.4 24.2 25.8

.78 .86 .82 .92 .95 1.02

97.0 100.8 105.0 110.3 117.9 126.6

3.82 3.97 3.13 4.34 4.64 4.98

13.1 13.1 18.1 18.1 22.2 28.3

22328LBK 22330LBK 22332LBK 22334LBK

SNW128 SNW130 SNW132 SNW134

4¹⁵⁄₁₆, 5 5³⁄₁₆ 5⁷⁄₁₆ 5¹⁵|₁₆

180.2 195.3 204.8 219.9

7.09 7.69 8.06 8.66

27.4 29.0 30.6 31.4

1.08 1.14 1.20 1.23

135.3 142.9 150.4 157.2

5.33 5.62 5.92 6.19

35.5 41.7 49.9 58.5

22336LBK 22338LBK 22340LBK 22344LBK

SNW136 SNW138 SNW140 SNW144

6⁷⁄₁₆ 6¹⁵⁄₁₆ 7³⁄₁₆ 7¹⁵⁄₁₆

230.2 240.5 250.0 279.4

9.06 9.47 9.84 11.00

32.1 32.9 34.5 36.1

1.27 1.30 1.36 1.42

163.9 171.4 180.2 184.9

6.45 6.75 7.09 7.28

69.4 79.8 90.7 130.2

23048LBKJ 23056LBKJ 23060LBKJ

SNP3048 SNP3056 SNP3060

8⁷|₁₆, 8¹⁵⁄₁₆ X 9¹⁵⁄₁₆, 10¹⁄₂ X 10¹⁵⁄₁₆, 11

290.5 330.2 360.4

11.44 13.00 14.19

44.0 48.0 51.2

1.73 1.89 2.02

138.1 157.2 171.0

5.44 6.19 6.73

32.0 45.5 59.0

22309LBK 22310LBK 22311LBK

22320LBK 22322LBK

Please consult for availability. + Tapered bore, 1:12 on diameter. ( Specify shaft size when ordering SNW OR SNP adapter assembly, i.e., SNW108-1³⁄₁₆. X SNP3048 adapter assemblies also available with 8¹⁄₂" and 9" bores; SNP3056 adapter assemblies available with 9⁷⁄₁₆", 9¹⁄₂" and 10⁷⁄₁₆" bores. Selection guide, pages F-3, F-4. Load ratings, page F-6. J Load ratings, consult Link-Belt Bearing Division, Rexnord Corp. Additional information, page F-17. Housing bearing seat diameters, pages F-13 and F-14.

F-10

Shaft Bearing Seat Diameters For Spherical Roller Bearings

Bearing bore tolerances are in accord with the system of tolerancing established by the International Standards Organization (ISO) and adopted by the American Bearing Manufacturers Association (ABMA) and the American National Standards Institute (ANSI). A system of limits and fits has been established by ISO for shafts. A portion of this system has been adopted by ABMA to provide flexibility in selecting shaft fits. Shaft fits are designated by a lower case letter and a number, such as h6. The letter indicates the location of the shaft tolerance limits with respect to the nominal bearing bore. The number indicates the size of the tolerance zone.

Many factors influence the proper fit on the bearing inner ring on a shaft. The magnitude of the load and its direction with respect to bearing inner or outer rings are generally the first factors considered in shaft fit selection. The effects of other factors such as vibration, shock, temperature, speed, etc. are of secondary importance but sometimes need to be considered. Where assembly or disassembly requirements are of prime importance special shaft fits may be required. Appropriate diameter shafting is determined (as shown) from the tables below.

Shaft fits recommended for various types of applications are listed in the table at right. A graphic relationship of various shaft fits is illustrated in the figure at the left.

Class of fit and shaft diameters (inches/µm) Bearing/Shaft diameter fitsG Bearing series 22200, 22300 23000 Basic size

Nominal bearing bore and shaft diameter inches

Bearing bore tolerance w

f6

g6

h6

h5

j5

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

Fit

Shaft Dia.

Fit

Shaft Dia.

Fit

Shaft Dia.

Fit

Shaft Dia.

Fit

Shaft Dia.

mm

08 09 10

1.5748 1.7717 1.9685

40.000 45.000 50.000

+.0000 –.0005 +0 –12

.0005L .0016L 13L 41L

–.0010 –.0016 –25 –41

.0001T .0010L 3T 25L

–.0004 –.0010 –9 –25

.0005T .0006L 12T 16L

+.0000 –.0006 +0 –16

.0005T .0004L 12T 11L

+.0000 –.0004 +0 –11

.0007T .0002L 18T 5L

+.0002 –.0002 +6 –5

11 12 13 14 15 16

2.1654 2.3622 2.5591 2.7559 2.9528 3.1496

55.000 60.000 65.000 70.000 75.000 80.000

+.0000 –.0006 +0 –15

.0006L .0019L 15L 49L

–.0012 –.0019 –30 –49

.0002T .0011L 5T 29L

–.0004 –.0011 –10 –29

.0006T .0007L 15T 19L

+.0000 –.0007 +0 –19

.0006T .0005L 15T 13L

+.0000 –.0005 +0 –13

.0008T .0003L 21T 7L

+.0002 –.0003 +6 –7

17 18 19 20 22 24

3.3465 3.5433 3.7402 3.9370 4.3307 4.7244

85.000 90.000 95.000 100.000 110.000 120.000

+.0000 –.0008 +0 –20

.0006L .0023L 16L 58L

–.0014 –.0023 –36 –58

.0003T .0014L 8T 34L

–.0005 –.0014 –12 –34

.0008T .0009L 20T 22L

+.0000 –.0009 +0 –22

.0008T .0006L 20T 15L

+.0000 –.0006 +0 –15

.0010T .0004L 26T 9L

+.0002 –.0004 +6 –9

26 28 30 32 34 36

5.1181 5.5118 5.9055 6.2992 6.6929 7.0866

130.000 140.000 150.000 160.000 170.000 180.000

+.0000 –.0010 +0 –25

.0006L .0026L 18L 68L

–.0016 –.0026 –43 –68

.0004T .0016L 11T 39L

–.0006 –.0016 –14 –39

.0010T .0010L 25T 25L

+.0000 –.0010 +0 –25

...... ...... ...... ......

...... ...... ...... ......

.0013T .0005L 32T 11L

+.0003 –.0004 +7 –11

38 40 44 48

7.4803 7.8740 8.6614 9.4488

190.000 200.000 220.000 240.000

+.0000 –.0012 +0 –30

.0008L .0032L 20L 79L

–.0020 –.0032 –50 –79

.0006T .0018L 15T 44L

–.0006 –.0018 –15 –44

.0012T .0012L 30T 29L

+.0000 –.0012 +0 –29

...... ...... ...... ......

...... ...... ...... ......

...... ...... ...... ......

...... ...... ...... ......

52 56 60

10.2362 11.0236 11.8110

260.000 280.000 300.000

+.0000 –.0014 +0 –35

.0008L .0034L 21L 88L

–.0022 –.0034 –56 –88

.0007T .0019L 18T 49L

–.0007 –.0019 –17 –49

.0014T .0012L 35T 32L

+.0000 –.0012 +0 –32

...... ...... ...... ......

...... ...... ...... ......

...... ...... ...... ......

...... ...... ...... ......

1µm = .001 mm L For solid steel shafts. ( C = basic load rating of bearing. l "The arithmetical mean of the largest and smallest single diameter to be within tolerance shown. Allowable deviations from mean diameter per ANSI/ABMA STD 20, latest printing."

F-11

Class of fit selection Operating condition Inner ring stationary in relation to direction of load

Inner ring has to be easily displaced Inner ring does not have to be easily displaced

All loads

Remarks

g6 All diameters h6

Electric apparatus, machine tools, pumps, ventilators, industrial trucks,

<=40 40—100 100—200

<=1.57 1.57—3.94 3.94—7.88

j6 k6 m6

Normal load >0.08C( <=0.18C (

Applications in general, electrical motors, turbines pumps, combustion engines, gear transmissions, woodworking machines

<=40 40—65 65—100 100—140 140—280 280—500 >500

<=1.57 1.57—2.56 2.56—3.94 3.94—5.52 5.52—11.10 11.10—19.7 >19.7

k5 m5 m6 n6 p6 r6 r7

Heavy load >0.18C(

Journal boxes for locomotives & other heavy rail vehicles, traction motors

<=40 40—65 65—100 100—140 140—200 >200

<=1.57 1.57—2.56 2.56—3.94 3.94—5.52 5.52—7.88 >7.88

m5 m6 n6 p6 r6 r7

Light load <=0.08C (

Direction of load indeterminate or inner ring rotating in relation to direction of load.

W

inches

mm

Wheel on stationary shaft Tension pulleys and rope sheaves

Radial load

Class of fit

Nominal shaft diameter

Examples

When greater accuracy is required, use j5, k5 and m5 for j6, k6, and m6 respectively.

Greater internal clearance may be required

Bearing/Shaft diameter fitsG j6

k5

k6

m5

m6

n6

p6

r6

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

Fit .0009T .0002L

23T 5L .0010T .0003L

22T 7L .0013T .0004L

33T 9L .0016T .0004L

39T 11L .0019T .0005L

46T 16L .0021T .0006L

51T 16L

Shaft Dia. +.0004 –.0002 + 11

–5 +.0004 –.0003 + 12

–7 +.0005 –.0004 + 13

–9 +.006 –.0004 + 14

–11 +.0007 –.0005 + 16

–16 +.0007 –.0006 + 16

–16

Fit .0010T .0001T

25T 2T .0012T .0001T

30T 2T .0015T .0001T

38T 3T .0018T .0001T

46T 3T .0022T .0002T

54T 4T .0025T .0002T

62T 4T

Shaft Dia.

Fit

+.0005 +.0001 + 13 +2

.0012T .0001T

+.0006 +.0001 + 15 +2

.0014T .0001T

+.0007 +.0001 + 18 +3

.0018T .0001T

+.0008 +.0001 + 21 +3

.0021T .0001T

+.0010 +.0002 + 24 +4

.0026T .0002T

+.0011 +.0002 + 27 +4

.0028T .0002T

30T 2T

36T 2T

45T 3T

53T 3T

63T 4T

71T 4T

Shaft Dia.

Fit

+.0007 +.0001 + 18 +2

.0013T .0004T

+.0008 +.0001 + 21 +2

.0016T .0005T

+.0010 +.0001 + 25 +3

.0019T .0005T

+.0011 +.0001 + 28 +3

.0023T .0006T

+.0014 +.0002 + 33 +4

.0026T .0006T

+.0014 +.0002 + 36 +4

.0031T .0008T

32T 9T

39T 11T

48T 13T

58T 15T

67T 17T

78T 20T

Shaft Dia.

Fit

+.0008 +.0004 + 20 +9

.0015T .0004T

+.0010 +.0005 + 24 + 11

.0018T .0005T

+.0011 +.0005 + 28 + 13

.0022T .0005T

+.0013 +.0006 + 33 + 15

.0026T .0006T

+.0014 +.0006 + 37 + 17

.0030T .0006T

+.0017 +.0008 + 43 + 20

.0034T .0008T

37T 9T

45T 11T

55T 13T

65T 15T

76T 17T

87T 20T

Shaft Dia.

Fit

+.0010 +.0004 + 25 +9

.0018T .0007T

+.0012 +.0005 + 30 + 11

.0021T .0008T

+.0014 +.0005 + 35 + 13

.0027T .0010T

+.0016 +.0006 + 40 + 15

.0032T .0012T

+.0018 +.0006 + 46 + 17

.0038T .0014T

+.0020 +.0008 + 52 + 20

.0040T .0014T

45T 17T

54T 20T

65T 23T

77T 27T

90T 31T

101T 34T

Shaft Dia.

Fit

Shaft Dia.

Fit

Shaft Dia.

+.0013 +.0007 + 33 + 17

...... ...... ...... ......

...... ...... ...... ......

...... ...... ...... ......

...... ...... ...... ......

+.0015 +.0008 + 39 + 20

.0027T +.021 .0014T +.0014 66T + 51 32T + 32

...... ...... ...... ......

...... ...... ...... ......

+.0019 +.0010 + 45 + 23

.0033T +.0025 .0016T +.0016 79T + 59 37T + 37

.0037T .0020T

+.0029 +.0020 + 73 + 51

+.0020 +.0011 + 52 + 27

.0038T +.0028 .0018T +.0018 93T + 68 43T + 43

.0045T .0025T

+.0026 +.0014 + 60 + 31

.0044T +.0032 .0020T +.0020 109T + 79 50T + 50

.0054T .0030T

+.0026 +.0014 + 66 + 34

.0048T +.0034 .0022T +.0022 123T + 88 56T + 56

.0061T .0035T

93T 51T

115T 65T

136T 77T

161T 94T

+.0035 +.0025 + 90 + 65 +.0042 +.0030 + 106 + 77 +.0047 +.0035 + 126 +94

G Symbol L indicates a loose or clearance fit; Symbol T indicates a tight or interference fit. The appropriate shaft diameter for any class of fit can be easily determined by applying the shaft tolerance to the nominal shaft diameter. Example: (Using basic bearing size 08 and fit class f6). inches mm Nominal shaft diameter = 1.5748 1.5748 = 40.000 40.000 Shaft diameter tolerance = – .0010 – .0016 = – 0.025 –␣ 0.041 Resultant shaft diameter

= 1.5738

1.5732

=

39.975

39.959

F-12

Housing Bearing Seat Diameters For Spherical Roller Bearings Bearing outside diameter tolerances are in accord with the system of tolerancing established by the International Standards Organization (ISO) and adopted by the American Bearing Manufacturers Association (ABMA) and the American National Standards Institute (ANSI). A system of limits and fits has been established by ISO for shafts. A portion of this system has been adopted by ABMA to provide flexibility in selecting shaft fits. Housing fits are designated by a capital letter and a number, such as H7. The letter indicates the location of the housing bore tolerance limits with respect to the nominal bearing O.D. The number indicates the size of the tolerance zone. Housing fits recommended for various types of applications are listed in the table at right. A graphic relationship of various housing fits is illustrated in the figure at the left. The class of

fit is determined by nature of loading (oscillating, vibrating, reversing, etc.), axial movement requirements, temperature conditions, housing material and cross section of housing. Shaft expansion increases bearing center distances and requires all but one bearing on a shaft to be movable axially in the housing. In most bearings the outer rings are subjected to stationary loads which permit a loose housing fit. Operating temperature may affect the housing fit, as the housing may dissipate heat rapidly and not expand with the outer ring. However, the loose fit must never be greater than necessary. Excessive looseness results in less accurate shaft centering and additional ring deformation under load. The appropriate housing bores are determined (as shown) from the tables below.

Class of fit and housing bores (inches/µm) Bearing/Shaft diameter fitsG Bearing series 222 232 223

230

231

Nominal bearing O.D. and housing bore inches

Basic Size

Bearing O.D. tolerance w

mm

G7

H8

H7

H6

J7

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

Fit

Housing Bore

Fit

Housing Bore

Fit

Housing Bore

.0005L .00025L 12L 62L

+.0005 +.0019 +12 +47

.0000 .0028L 0 69L

+.0000 +.0022 +0 +54

.0000 .0020L 0 50L

+.0000 +.0014 +0 +35

.0000 .0015L 0 37L

+.0000 +.0009 +0 +22

.0005T .0015L 13T 37L

–.0005 +.0009 –13 +22

Fit

Housing Bore

Fit

Housing Bore

09 10 11 12 13

.. 08 09 10 11

.. .. .. .. ..

.. .. .. .. ..

3.3465 85.000 3.5433 90.000 3.9370 100.000 4.3307 110.000 4.7244 120.000

+.0000 –.0006

14 15 16 17

.. 12 13 14

.. .. .. ..

.. .. .. ..

4.9312 5.1181 5.5118 5.9055

125.000 130.000 140.000 150.000

+.0000 –.0008 +0 –20

.0006L .0030L 14L 74L

+.0006 +.0022 +14 +54

.0000 .0033L 0 83L

+.0000 +.0025 +0 +63

.0000 .0024L 0 60L

+.0000 +.0016 +0 +40

.0000 .0018L 0 45L

+.0000 +.0010 +0 +25

.0006T .0018L 14T 46L

–.0006 +.0010 –14 +26

18 19 20

15 16 17

.. .. 24

.. .. 22

6.2992 165.000 6.6929 170.000 7.0866 180.000

+.0000 –.0010 +0 –25

.0006L .0032L 14L 79L

+.0006 +.0022 +14 +54

.0000 .0035L 0 88L

+.0000 +.0025 +0 +63

.0000 .0026L 0 65L

+.0000 +.0016 +0 +40

.0000 .0020L 0 50L

+.0000 +.0010 +0 +25

.0006T .0020L 14T 51L

–.0006 +.0010 –14 +26

.. 22 .. 24 .. 26 .. 28

18 19 .. 20 .. .. 22 ..

.. 26 28 .. 30 .. 32 ..

.. 24 26 .. 28 .. .. 30

7.4803 7.8740 8.2677 8.4646 8.8583 9.0551 9.4488 9.8425

190.000 200.000 210.000 215.000 225.000 230.000 240.000 250.000

+.0000 –.0012 +0 –30

.0006L .0036L 15L 91L

+.0006 +.0024 +15 +61

.0000 .0040L 0 102L

+.0000 +.0028 +0 +72

.0000 .0030L 0 76L

+.0000 +.0018 +0 +46

.0000 .0024L 0 59L

+.0000 +.0012 +0 +29

.0007T .0023L 16T 60L

–.0007 +.0011 –16 +30

.. 30 .. 32 .. 34

24 .. 26 .. 28 ..

34 .. 36 38 .. 40

.. 32 34 .. 36 ..

10.2362 10.6299 11.0236 11.4173 11.8110 12.2047

260.000 270.000 280.000 290.000 300.000 310.000

+.0000 –.0014 +0 –35

.0007L .0041L 17L 104L

+.0007 +.0027 +17 +69

.0000 .0044L 0 116L

+.0000 +.0030 +0 +81

.0000 .0034L 0 87L

+.0000 +.0020 +0 +52

.0000 .0026L 0 67L

+.0000 +.0012 +0 +32

.0007T .0027L 16T 71L

–.0007 +.0013 –16 +36

36 38 40 .. .. 44

30 32 34 .. 36 38

.. 44 48 .. .. 52

38 40 .. 44 .. 48

12.5984 13.3858 14.1732 14.5669 14.9606 15.7480

320.000 340.000 360.000 370.000 380.000 400.000

+.0000 –.0016 +0 – 40

.0007L .0045L 18L 115L

+.0007 +.0029 +18 +75

.0000 .0051L 0 129L

+.0000 +.0035 +0 +89

.0000 .0038L 0 97L

+.0000 +.0022 +0 +57

.0000 .0030L 0 76L

+.0000 +.0014 +0 +36

.007L .0031L 18T 79L

–.0007 +.0015 –18 +39

.. 48 ..

40 .. 44

56 .. 60

.. .. ..

16.5354 420.000 17.3228 440.000 18.1102 460.000

+.0000 –.0018 +0 – 45

.0008L .0051L 20L 128L

+.0008 +.0033 +20 +83

.0000 .0056L 0 142L

+.0000 +.0038 +0 +97

.0000 .0043L 0 108L

+.0000 +.0025 +0 +63

.0000 .0034L 0 85L

+.0000 +.0016 +0 +40

.0009T .0034L 20T 88L

–.0009 +.0016 –20 +43

+0

–15

l "The arithmetical mean of the largest and smallest single diameter to be within tolerance shown. 1 µm = .001 mm Allowable deviations from mean diameter per ANSI/ABMA STD 20, latest printing." G Symbol L indicates a loose or clearance fit. Symbol T indicates a tight or interference fit. The appropriate housing bore for any class of fit can be easily determined by applying the housing tolerance to the nominal housing bore. Example: (Using basic bearing size 09 and fit class G7). inches mm Nominal housing bore = 3.3465 3.3465 = 85.000 85.000 Shaft bore tolerance = + .0005 + .0019 = + 0.012 + 0.047 Resultant housing bore = 3.3470 3.3484 = 85.012 85.047

F-13

Class of fit selection Housing construction

Operating condition Heavy loads on bearings in thin-walled housing


Housing rotating in relation to direction of load

Housing split or housing not split radially

Normal and heavy loads

Housing stationary in relation to direction of load

ing wheels in cranes, wheel hubs with roller bearings, crank bearings Wheel hubs with roller bearings, crank bearings

Heavy shock loads

Electrical fraction motors Electrical motors, pumps, crankshaft main bearings Electrical motors, pumps, crankshaft main bearings

Shock loads, a temporary complete unloading

Journal boxes for rail vehicles

All loads

Bearing applications in general, journal boxes for rail vehicles Line shafting Dryer cylinders

Housing split radially Heat supplied through shaft

P6X N6X M6X

Heavy and normal loads where outer ring does not have to be axially displaceable Normal and light loads where displaceability of outer ring is desirable


Remarks

W

Conveyor rollers, rope sheaves, tension pulleys

Light loads

Direction of load indeterminate

Class of fit

Examples

K6X

Outer ring not axially displaceable

Outer ring, as a rule, not axially displaceable Outer ring, as a rule, axially displaceable

J6X H6X H7 G7

Outer ring easily displaceable axially

Bearing/Housing diameter fitsG J6

K6

K7

M6

M7

N6

N7

P7

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

Tolerance

Fit

Housing Bore

Fit

Housing Bore

Fit

Housing Bore

Fit

Housing Bore

Fit

Housing Bore

Fit

Housing Bore

Fit

Housing Bore

Fit

Housing Bore

.0002T .0013L 6T 31L

–.0002 +.0007 –6 +16

.0007T .0008L 18T 19L

–.0007 +.0002 –18 +4

.0010T .0010L 25T 25L

–.0010 +.0004 –25 +10

.0012T .0003L 28T 9L

–.0012 –.0003 –28 –6

.0014T .0006L 35T 15L

–.0014 +.0000 –35 +0

.0016T .0001T 38T 1T

–.0016 –.0007 –38 –16

.0018T .0002L 45T 5L

–.0018 –.0004 – 45 –10

.0025T .0005T 59T 9T

–.0025 –.0011 –59 –24

.0003T .0015L 7T 38L

.0003 .0007 –7 +18

.0008T .0010L 21T 24L

–.0008 +.0002 –21 +4

.0011T .0013L 28T 32L

–.0011 +.0005 –28 +12

.0013T .0005L 33T 12L

–.0013 –.0003 –33 –8

.0016T .0008L 40T 20L

–.0016 +.0000 – 40 +0

.0019T .0001T 45T 0T

–.0019 –.0009 –45 –20

.0022T .0002L 52T 8L

–.0022 –.0006 –52 –12

.0028T .0004T 68T 8T

–.0028 –.0012 – 68 –28

.0003T .0017L 7T 43L

–.0003 +.0007 –7 +18

.0008T .0012L 21T 29L

–.0008 +.0002 –21 +4

.0011T .0015L 28T 37L

–.0011 +.0005 –28 +12

.0013T .0007L 33T 17L

–.0013 –.0003 –33 –8

.0016T .0010L 40T 25L

–.0016 +.0000 – 40 +0

.0019T .0001L 45T 5L

–.0019 –.0009 –45 –20

.0022T .0004L 52T 13L

–.0022 –.0006 –52 –12

.0028T .0002T 68T 3T

–.0028 –.0012 –68 –28

.0003T .0021L 7T 52L

–.0003 +.0009 –7 +22

.0010T .0014L 24T 35L

–.0010 +.0002 –24 +5

.0013T .0017L 33T 43L

–.0013 +.0005 –33 +13

.0015T .0009L 37T 22L

–.0015 –.0003 –37 –8

.0018T .0012L 46T 30L

–.0018 +.0000 –46 +0

.0022T .0002L 51T 8L

–.0022 –.0010 –51 –22

.0026T .0004L 60T 16L

–.0026 –.0008 –60 –14

.0032T .0002T 79T 3T

–.0032 –.0014 –79 –33

.0003T .0023L 7T 60L

–.0003 +.0009 –7 +25

.0010T .0016L 22T 40L

–.0010 +.0002 –27 +5

.0014T .0020L 36T 51L

–.0014 +.0006 –36 +16

.0016T .0010L 41T 26L

–.0016 –.0004 – 41 –9

.0020T .0014L 52T 35L

–.0020 +.0000 –52 +0

.0023T .0003L 57T 10L

–.0023 –.0011 –57 –25

.0028T .0006L 66T 21L

–.0028 –.0008 – 66 –14

.0034T .0000 88T 1T

–.0034 –.0014 – 88 –36

.0003T .0027L 7T 69L

–.0003 +.0011 –7 +29

.0012T .0018L 29T 47L

–.0012 +.0002 –29 +7

.0016T .0022L 40T 57L

–.0016 +.0006 – 40 +17

.0018T .0012L 46T 30L

–.0018 –.0004 – 46 –10

.0022T .0016L 57T 40L

–.0022 +.0000 –57 +0

.0026T .0004L 62T 14L

–.0026 –.0012 –62 –26

.0030T .0008L 73T 26L

–.0030 –.0008 –73 –16

.0039T .0001T 98T 1T

–.0039 –.0017 –98 – 41

.0003T .0031L 7T 78L

–.0003 +.0013 –7 +33

.0012T .0022L 32T 53L

–.0012 +.0004 –32 +8

.0018T .0025L 45T 63L

–.0018 +.0007 – 45 +18

.0020T .0014L 50T 35L

–.0020 –.0004 –50 –10

.0025T .0018L 63T 45L

–.0025 +.0000 – 63 +0

.0028T .0006L 67T 18L

–.0028 –.0012 – 67 –27

.0034T .0009L 80T 28L

–.0034 –.0009 – 80 –17

.0044T .0001T 108T 0

–.0044 –.0019 –108 – 45

L For cast iron or steel housings. For housings of light metal, select tolerances which give slightly tighter fits than those shown. X Where wider tolerances are permissible P7, N7, M7, K7, J7 and H7 may be used for P6, N6, M6, K6, J6 and H6 respectively.

F-14

Radial Clearances

Cylindrical Bore Spherical Roller Bearings Cylindrical bore bearings Internal clearance symbol

Series 22200, 22300 23000 Basic size

C2

C0(basic)

C4

08

40

.0006–.0012

15–30

.0012–.0018

30–45

.0018–.0024

45–60

.0024–.0032

60–80

09 10

45 50

.0008–.0014

20–35

.0014–.0022

35–55

.0022–.0030

55–75

.0030–.0039

75–100

11 12 13

55 60 65

.0010–.0017

25–40

.0017–.0026

40–65

.0026–.0036

65–90

.0036–.0047

90–120

14 15 16

70 75 80

.0012–.0020

30–50

.0020–.0032

50–80

.0032–.0044

80–110

.0044–.0057

110–145

17 18 19 20

85 90 95 100

.0014–.0025

35–60

.0025–.0039

60–100

.0039–.0053

100–135

.0053–.0071

135–180

22 24

110 120

.0017–.0031

40–80

.0031–.0048

80–120

.0048–.0064

120–160

.0064–.0083

160–210

26 28

130 140

.0020–.0038

50–95

.0038–.0057

95–145

.0057–.0075

145–190

.0075–.0095

190–240

30 32

150 160

.0024–.0043

60–110

.0043–.0065

110–165

.0065–.0087

165–220

.0087–.0110

220–280

34 36

170 180

.0026–.0047

65–120

.0047–.0071

120–180

.0071–.0095

180–240

.0095–.0122

240–310

38 40

190 200

.0028–.0051

70–130

.0051–.0079

130–200

.0079–.0103

200–260

.0103–.0133

260–340

44

220

.0032–.0055

80–140

.0055–.0087

140–220

.0087–.0114

220–290

.0114–.0149

290–380

48

240

.0036–.0059

90–150

.0059–.0095

150–240

.0095–.0126

240–320

.0126–.0165

320–420

52 56

260 280

.0039–.0067

100–170

.0067–.0103

170–260

.0103–.0138

260–350

.0138–.0180

350–455

60

300

.0044–.0075

110–190

.0075–.0110

190–280

.0110–.0145

280–370

.0145–.0197

370–500

1µm = .001 mm C2 = Internal clearance less than C0 C0 = Basic internal clearance C3 = Internal clearance greater than C0 (standard) C4 = Internal clearance greater than C3

F-15

C3

inches – µm

Bore mm

Radial Clearances

Tapered Bore Spherical Roller Bearings Tapered bore bearings Internal clearance symbol

Series 22200, 22300, 23000 Basic size

C2

C0(basic)

Bore mm

C3

C4

inches – µm

08

40

.0008–.0014

20–35

.0014–.0020

35–50

.0020–.0026

50–65

.0026–.0034

65–85

09 10

45 50

.0012–.0018

30–45

.0018–.0024

45–60

.0024–.0032

60–80

.0032–.0041

80–105

11 12 13

55 60 65

.0014–.0022

35–55

.0022–.0030

55–75

.0030–.0039

75–100

.0039–.0049

100–125

14 15 16

70 75 80

.0018–.0028

45–70

.0028–.0037

70–95

.0037–.0049

95–125

.0049–.0061

125–155

17 18 19 20

85 90 95 100

.0020–.0032

50–80

0032–.0044

80–110

.0044–.0057

110–145

.0057–.0075

145–190

22 24

110 120

.0025–.0039

60–100

.0039–.0053

100–135

.0053–.0069

135–175

.0069–.0089

175–225

26 28

130 140

.0030–.0047

75–120

.0047–.0063

120–160

.0063–.0081

160–205

.0081–.0102

205-260

30 32

150 160

.0033–.0051

85–130

.0051–.0071

130–180

.0071–.0091

180–230

.0091–.0118

230–300

34 36

170 180

.0037–.0055

95–140

.0055–.0079

140–200

.0079–.0102

200–260

.0102–.0134

260–340

38 40

190 200

.0041–.0063

105–160

.0063–.0088

160–220

.0088–.0114

220–290

.0114–.0146

290–370

44

220

.0047–.0071

120–180

.0071–.0099

180–250

.0099–.0126

250–320

.0126–.0162

320–410

48

240

.0053–.0079

135–200

.0079–.0106

200–270

.0106–.0140

270–355

.0140–.0178

355–450

52 56

260 280

.0059–.0087

150–220

.0087–.0118

220–300

.0118–.0156

300–395

.0156–.0195

395–490

60

300

.0065–.0094

165–235

.0094–.0130

235–330

.0130–.0169

330–430

.0169–.0213

430–540

1µm = .001 mm C2 = Internal clearance less than C0 C0 = Basic internal clearance C3 = Internal clearance greater than C0 (standard) C4 = Internal clearance greater than C3

F-16


Series 22200, 22300, 23000 Additional Features:

Operation:

Fixed and Expansion Mounting:

Spherical roller bearings are available with varied combinations of standard features. The nomenclature, page F-18, explains the features available; clearance variations C2, C0, and C4; bearing outside diameter tolerances C40, W22, and C50; and variations as listed.

Spherical roller bearings are designed to be used with grease or oil lubrication. The service instructions packed with each bearing provide guidelines for lubrication, relubrication intervals and recommended lubricants.

The normal application of spherical roller bearings requires the use of one fixed and one expansion mounting on a shaft. Unless vibratory loads are involved, expansion mounting of a spherical roller bearing is accomplished by allowing room for the bearing to shift axially in either direction in its housing. Care should always be taken not to force bearings to thrust against or away from each other during mounting or operation.

Where metric adapter sleeves are required they must be listed separately, as they are not interchangeable with inch sleeves and do not fit with inch locknuts.

Where significant thrust loads must be carried by adapter mounted bearings, the use of shaft shoulder rings is recommended to transmit the thrust from the bearings to the shaft. Imposed radial loads should not exceed .25C. Where high radial loads, high speeds, thrust loads or vibratory loads are unavoidable, consult the Link-Belt Bearing Division.

Shaft Fits and Tolerances: Direct shaft mounting requires appropriate fits on bearing seals. Recommended fits and tolerances for bearing seals are shown on pages F-11 and F-12. Recommended fits and tolerances for bearing housings are on pages F-13 and F-14. Shaft diameters for adapter mounted bearings should be held to the following regular commercial tolerances: Shaft Diameter

Recommended Tolerance

1³⁄₁₆" 2¹⁄₁₆" 4¹⁄₁₆" 6¹⁄₁₆"

Nominal to –.003" Nominal to –.004" Nominal to –.005" Nominal to –.006"

through through through through

2" 4" 6" 12"

Warning: The reliability built into all Link-Belt bearings can be realized in service only when they are correctly selected and properly installed, protected and maintained.

Housings and covers must be designed to safely handle the radial and axial loads involved. Adequate space must be provided in the housing and covers for a supply of lubricant.

The correct selection of bearings or mounted units requires that the magnitude and nature of all loads, speeds, alignment, mounting, operating requirements, and maintenance be adequately considered. The selection of materials for and design of housings, shafting, fasteners, seals, and accessories, as well as provisions for installation and maintenance, must follow good engineering principles.

Seals must be provided that will satisfactorily cope with the environmental conditions.

F-17

Recommended fitting practices should be followed strictly to assure a successful mounting arrangement. Shaft and housing bore size tables are provided on pages F-11 through F-14 for various fitting practices.


Nomenclature

Series 22200, 22300, 23000 Spherical Roller Bearings Symbol 2 22 16 LB

Description

Cylindrical bore Tapered bore

W33

Lubrication holes and groove in outer ring (standard)

W22 C40 C50 W4

22

16

LB

K / W33 / C0 / C40 / W 4

Used to distinguish from other series Bearing dimension series (22, 23, 30) One-fifth of bore diameter (mm) Designation for Link-Belt spherical roller bearing

None K

C2 C0 C3 C4

2

Internal clearance less than C0 Basic internal clearance Internal clearance greater than C0 (standard) Internal clearance greater than C3 Reduced O.D. tolerance in center of standard tolerance range Reduced O.D. tolerance on high side Reduced O.D. tolerance on low side Inner ring marked to show high point of eccentricity

The nomenclature is provided to identify the basic and optional features of bearing and mounted unit assemblies. The most commonly specified variations are listed; however, availability of all variations cannot be assumed. Link-Belt Bearing Division, Rexnord Corp. should be consulted regarding optional features, availability, and the application requirements.

F-18


Contents Series M1000, 1200, 1300, 1900, 5200, 5300, 7300 Introduction .................................. G-1 Pictorial Index .............................. G-3 Selection ....................................... G-5 Ratings ......................................... G-7 Dimensions ................................. G-15 Shaft Dimensions ....................... G-25 Housing Dimensions .................. G-27 Additional Information ............... G-31 Nomenclature ............................. G-32

Series N-EC 200E, 300E Introduction ................................ G-33 Dimensions ................................. G-35 Nomenclature ............................. G-36

G-1

Series M1000, 1200, 1300, 1900, 5200, 5300, 7300

a Rings of high quality bearing steel for strength, toughness and durability.


c Exclusive honed crown on roller profile for optimized raceway area and high capacity.

Metric series cylindrical roller bearings are manufactured to ABMA boundary dimensions. These bearings require minimum space and provide maximum rated capacity. Various configurations including separable inner or outer ring combinations offer ample application flexibility.

b Microfinished raceways assure smooth operations.

d Structural design segmented retainer provides high strength, positive roller spacing and guidance. e One-piece formed steel retainer provides positive roller spacing and controlled roller guidance. f Polymeric retainer of glass fiber reinforced nylon 6/6 provides full roller guidance, superior lubrication and reduced noise.

Segmented Retainers Rigid structural design segmented steel retainer provides high strength, positive roller spacing and guidance. All surfaces are contoured to minimize the wiping action between retainer segments and rollers, assuring

full roller lubrication. Precision spacer segments the rollers above and below pitch diameter resulting in low friction loss and positive roller control.

Polymeric Retainers Made of glass fiber reinforced nylon 6/6, molded polymeric retainers provide close control of roller "drop," low noise, full roller guidance and superior lubrication, at a competitive price.

Extensive testing has established compatibility with a broad range of standard lubricants and satisfactory operation at sustained temperatures to 275°F.

Formed Steel Retainers One-piece deep coined formed steel retainer combines strength with positive roller spacing and roller guidance.

surfaces minimizes wiping action and promotes hydrodynamic lubrication.

The retainer guides the rollers below the pitch line and provides control of roller drop. Line of rollers on guidance

Rollers Exclusively crowned honed rollers provide optimized at the raceway. This assures efficient bearing performance under load, provides controlled stress

distribution under all loads within the design capacity and compensates for shaft deflection.

Rings Rings are manufactured from high quality bearing steel to enhance fatigue resistance, strength, toughness and hardenability.

standard boundary plan for bore, outside diameter, and width…standard tolerances are RBEC-1. Precision tolerances to RBEC-5 are available.

Bearings and ring and roller assemblies for omitted-ring applications are ABMA

Optional Series and Configurations Series M cylindrical roller bearings are available in seven series with segmented retainers, five series with formed steel retainers, several series with polymeric retainers, and five series of the full roller complement type. Various configurations, including separable inner or outer ring combinations are offered.

G-2

Cylindrical Roller Bearings—Series M

Separable Cylindrical Inner Ring Type MA ---MA ---MA ---MA ----

TV, UV, EX, EB,

MA ---- TAV MA ---- UAV MA ---- EAX MA ---- EAB

Formed steel retainer Segmented steel retainer Polymeric retainer

Use where shaft location is not required; functions as an expansion bearing.

Outer Ring and Roller Assembly M ------ TV, M ------ UV, M ------ EX, M ------ EB,

M ------ TAV M ------ UAV M ------ EAX M ------ EAB


Rollers are in direct with hardened shaft raceway. Load ratings on pages G-7 through G-14. Dimensions on pages G-15 through G-22. Additional information on page G-31.

Separable Single-ribbed Inner Ring Type MR ---MR ---MR ---MR ----

TV UV, EX, EB,

MR ---- TAV MR ---- UAV MR ---- EAX MR ---- EAB


Use for one-direction shaft location. Load ratings on pages G-7 through G-14. Dimensions on pages G-15 through G-22. Additional information on page G-31.

Separable Inner Ring With End Plate MSN --- EX, MSN --- EAX Segmented steel retainer MSN --- EB, MSN --- EAB Polymeric retainer The inner ring and end plate operate as a two-ribbed inner ring when held in place axially on the shaft. Used for two-direction shaft location and moderate thrust loads.

Separable Outer Ring With End Plate MU --- SNX, MU --- SNAX MU --- SNB, MU --- SNAB

Segmented steel retainer Polymeric retainer

The outer ring and end plate operate as a two-ribbed outer ring when held in place axially in the housing. Used for two-direction housing location and moderate thrust loads. Load ratings on pages G-7 through G-14. Dimensions on pages G-15 through G-22. Additional information on page G-31.

Non-separable Type Bearing MU --- TV, MU --- TAV MU --- UV, MU --- UAV

Formed steel retainer

Use as a locating bearing or when only one race is retained axially. Load ratings on pages G-7 through G-14. Dimensions on pages G-15 through G-22. Additional information on page G-31.

G-3

Separable Cylindrical Outer Ring MU --- CX, MU --- CAX MU --- CB, MU --- CAB


For applications and where an inner ring and roller subassembly is required; a non-locating or expansion type bearing.

Inner Ring and Roller Assembly MU --- X MU --- B


Permits smaller housing bore. Rollers are in direct with hardened housing raceway. Load ratings on pages G-7 through G-14. Dimensions on pages G-15 through G-22. Additional information on page G-31.

Separable Single-ribbed Outer Race MU --- DX, MU --- DAX MU --- DB, MU --- DAB


Use for one-direction location and moderate thrust loads. For applications where an inner ring and roller subassembly is required. Load ratings on pages G-7 through G-14. Dimensions on pages G-15 through G-22. Additional information on page G-31.

Non-separable, Full Complement Bearing MU --- TM MU --- UM

Full roller complement

Use as a locating bearing or when only one race is retained axially. Full complement of rollers provide greater capacity than the same size bearing with a retainer. Load ratings on pages G-7 through G-14. Dimensions on pages G-15 through G-22. Additional information on page G-31.

Separable Cylindrical Inner Ring Type Double Wide Series MA62 --- TV Double Row—Use where shaft location is not required and heavy loads; functions as expansion bearing. Load ratings on pages G-23 and G-24. Dimensions on pages G-23 and G-24. Additional information on page G-31. G-4

Selection

Cylindrical Roller Bearings To select a bearing, determine the applied radial load, any applied thrust load, the desired Rating Life, and applicable operating conditions. The procedure shown here will aid in selecting a bearing to meet an L₁₀ design life. The formulas for calculating life expectancy should be used to determine the Rating Life L₁₀ for the bearing selected. Cylindrical roller bearings are available in various series with cylindrical bores for direct shaft mounting. Bearings in several series may fulfill the L₁₀ life requirements. Speed limits, minimum shaft diameters, arrangement requirements and space limitations may be determining factors in final bearing selection.

The selection procedures and rating formulas shown here are in agreement with The American Bearing Manufacturers Association Standards and ANSI/ABMA STD 11-1990. Ratings are based on fatigue life. The Rating Life L₁₀ or fatigue life at 90% reliability is the usual basis for bearing selection. Cylindrical roller bearings are essentially radial bearings. Nevertheless those styles where integral ribs are in the proper location on inner and outer rings will also thrust loading. In fact, most such styles do incidental, axial locating loads. Whenever applied thrust loading is known to exist, the guidelines given for

Bearing Selection Step 1 Determine an appropriate L₁₀ design life.

Type of service

Operating time, hours per year

Design life, years

L₁₀ design life, hours

Light seasonal usage Heavy seasonal usage Industrial—8 hour shift Industrial—16 hour shift Industrial—continuous Continuous—high reliability

500 to 750 1,400 to 1,600 2,000 4,000 8,700 —

3-5 4-6 10 10 10 —

3,000 8,000 20,000 40,000 80,000 to 100,000 120,000 to 300,000


from Table 1.

Step 3 Calculate the required C and select a cylindrical roller bearing. P = Fr required C =

P using

from Step 2.

Select a cylindrical roller bearing of the desired type having a basic load rating C equal to or greater than the required C from the appropriate series. The life expectancy of other sizes and series of cylindrical roller bearings can be calculated. When thrust load is present, check the individual bearing thrust capacity and follow the requirements for lubrication under thrust conditions.

Step 4 Determine the permissible speed limit of the bearing through the following procedure: Permissible speed limits are of practical value only when considered with other factors of bearing operation. Not every application functions satisfactorily at the listed speeds. Load, lubrication, and temperature factors influence the performance. Bearing operation at the listed speed limit demands excellent lubrication, moderate load, and reasonable temperature environment. Permissible speed can be approximated from the limiting DN value, which is the product of the bearing bore in millimeters and the speed in RPM. The DN values shown below are nominal. For higher permissible speeds, consult Link-Belt Bearing Division, Rexnord Corporation. DN value = Bearing bore (mm) x speed (RPM) Bearing series Limit of DN Value* Series 1900, 1000, 1200, 1300 & 7300 with segmented or polymeric retainer with formed steel retainer Series 5200, 6200, and 5300 with segmented or polymeric retainer (5200, 5300 only) with formed steel retainer Full complement *These values assume oil lubrication

G-5

450,000 250,000 330,000 180,000 150,000

Thrust Loads on p. G-6 must be carefully followed. Selection and life expectancy formulas shown here are also valid for inner ring and roller assemblies and for outer ring and roller assemblies provided they are run directly on bearing quality steel shafts or housings properly hardened and ground. To assure a satisfactory bearing application, fitting practice, mounting, lubrication, sealing, static rating, housing strength, operating conditions and maintenance must be considered.

Selection


C Co Fr L₁₀ n P

= = = = = =

symbols for formulas: basic load rating, pounds (or newtons) static load rating, pounds (or newtons) radial load, pounds (or newtons) rating life, hours speed, revolutions per minute equivalent radial load, pounds (or newtons)

basic formulas: =

L₁₀ T n T 60 1,000,000

10/3

3/10

L₁₀ =

T 1,000,000

n T 60

Life Expectancy To calculate the Rating Life L₁₀ of any pair of selected or trial bearings:

Step 1 Determine the equivalent radial load P. P = Fr

Step 2 Calculate the ratio of the bearing basic load rating C to the equivalent radial load. C P Step 3 Approximate the bearing life from Table 1.

Table 1 • Relation of L₁₀ life and speed to ratio


Speed, n 50

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

100

200

300

400

500

600

700

800

1.93 2.11 2.25 2.38 2.59 2.77 2.93 3.07 3.19 3.31 3.42 3.65 3.86 4.04 4.20 4.36 4.50 4.75 4.97 5.18 5.36 5.54 6.25 6.81

2.38 2.93 3.31 3.61 2.59 3.19 3.61 3.93 2.77 3.42 3.86 4.20 2.93 3.61 4.07 4.44 3.19 3.93 4.44 4.84 3.42 4.20 4.75 5.18 3.61 4.44 5.02 5.47 3.78 4.65 5.25 5.73 3.93 4.84 5.47 5.96 4.07 5.02 5.66 6.18 4.20 5.18 5.85 6.37 4.50 5.54 6.25 6.81 4.75 5.85 6.60 7.20 4.97 6.12 6.92 7.54 5.18 6.37 7.20 7.85 5.36 6.60 7.46 8.13 5.54 6.81 7.70 8.39 5.85 7.20 8.13 8.86 6.12 7.54 8.51 9.28 6.37 7.85 8.86 9.66 6.60 8.13 9.18 10.00 6.81 8.39 9.48 10.30 7.70 9.48 10.70 11.70 8.39 10.30 11.70 12.70

3.86 4.20 4.50 4.75 5.18 5.54 5.85 6.12 6.37 6.60 6.81 7.29 7.70 8.06 8.39 8.69 8.97 9.48 9.92 10.30 10.70 11.00 12.50 13.60

4.07 4.44 4.75 5.02 5.47 5.85 6.18 6.47 6.73 6.97 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.00 10.50 10.90 11.30 11.70 13.20 14.40

4.27 4.65 4.97 5.25 5.73 6.12 6.47 6.77 7.05 7.30 7.54 8.06 8.51 8.92 9.28 9.61 9.92 10.50 11.00 11.40 11.80 12.20 13.80 15.00

4.44 4.84 5.18 5.47 5.96 6.37 6.73 7.05 7.34 7.60 7.85 8.39 8.86 9.28 9.66 10.00 10.30 10.90 11.40 11.90 12.30 12.70 14.40 15.70

900

1000 1200 1500 1800 2400 3000 3600 6000

Speed, n

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

4.60 5.02 5.36 5.66 6.18 6.60 6.97 7.30 7.60 7.88 8.13 8.69 9.18 9.61 10.00 10.40 10.70 11.30 11.80 12.30 12.80 13.20 14.90 16.20

4.75 5.18 5.54 5.85 6.37 6.81 7.20 7.54 7.85 8.13 8.39 8.97 9.48 9.92 10.30 10.70 11.00 11.70 12.20 12.70 13.20 13.60 15.40 16.70

5.02 5.47 5.85 6.18 6.73 7.20 7.60 7.96 8.29 8.59 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.30 12.90 13.40 13.90 14.40 16.20 17.70

5.36 5.85 6.25 6.60 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.10 10.70 11.20 11.70 12.10 12.50 13.20 13.80 14.40 14.90 15.40 17.30 18.90

5.66 6.18 6.60 6.97 7.60 8.13 8.59 8.99 9.36 9.70 10.00 10.70 11.30 11.80 12.30 12.80 13.20 13.90 14.60 15.20 15.70 16.20 18.30 20.00

6.18 6.73 7.20 7.60 8.29 8.86 9.36 9.80 10.20 10.60 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.20 15.90 16.50 17.10 17.70 20.00 21.80

6.60 7.20 7.70 8.13 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.50 13.20 13.80 14.40 14.90 15.40 16.20 17.00 17.70 18.30 18.90 21.40 23.30

6.97 7.60 8.13 8.59 9.36 10.00 10.60 11.10 11.50 11.90 12.30 13.20 13.90 14.60 15.20 15.70 16.20 17.10 17.90 18.70 19.40 20.00 22.60 24.60

8.13 8.86 9.48 10.00 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.40 16.20 17.00 17.70 18.30 18.90 20.00 20.90 21.80 22.60 23.30 26.30 28.70

Thrust Loads The integral guiding ribs on standard cylindrical roller bearing inner and outer rings will limited thrust loads. In addition, special tolerances and processing can be used to substantially increase axial load capacity. In either case, excellent lubrication (preferably with an EP lubricant) and a stabilizing radial load are required. For standard bearings, the allowable thrust load is estimated as T M = CA 3n0.3 where TM Maximum allowable thrust load, pounds (or newtons) CA Load rating C (pounds or newtons) of the narrowest series for the given annulus (O.D. and bore) at 33¹⁄₃ RPM and 500L₁₀ hours. n Operating speed, RPM In addition, the thrust load should be no greater than 25% of the radial load. Where application conditions exceed either of these limits, Link-Belt Bearing Division should be consulted. , Life Adjustment

The Rating ,Life, L₁₀, may be modified for some applications in accordance with the formula Ln = a₁a₂a₃L₁₀ where

Ln = Adjusted life for (100-n) % reliablility, a₁ = Life adjustment factor for reliability a₂ = Life adjustment factor for material and processing a₃ = Life adjustment factor for operating conditions. For most normal applications, all factors will be taken as 1, and the Rating Life used as the selection basis or life estimate. In addition, as long as standard catalog bearings are used, a₂ will be normally set equal to one. The factor a₃ covers such things as lubrication, misalignment, and temperature. Some conditions that could yield a₃ significantly different than unity include speeds less than 20000 DN or greater than 200000 DN, temperatures below –40°F (–40°C) or above 275°F (135°C), or misalignment greater than 0.0005 radians.. For other possible conditions, as well as additional information on life adjustment factors, consult Link-Belt Bearing Division, Rexnord Corp. G-6

Ratings

Series M 25 mm, 30 mm, 35 mm, 40 mm Bores

Separable

Non-Separable


Non-Separable


Segmented steel retainer

pounds/newtons Formed steel retainer Separable Basic bearing number 1205 5205 1305 7305 5305 1206 5206 1306 7306 5306 1207 5207 1307 7307 5307 1208 5208 1308 7308 5308

C Basic load rating 4330 19 200 5930 26 400 6310 28 100 8070 35 900 9720 43 200 5990 26 700 9040 40 200 7970 35 400 10500 46 800 12800 57 000 6840 30 400 11300 50 200 9840 43 800 13800 61 500 15900 70 800 8270 36 800 14300 63 800 12600 56 000 17900 79 600 20000 89 100

Bearing Capacity 500 RPM 3000 Hrs. L-10 1120 4 980 1540 6 830 1630 7 270 2090 9 300 2520 11 200 1550 6 910 2340 10 400 2060 9 180 2720 12 100 3320 14 800 1770 7 870 2920 13 000 2550 11 300 3580 15 900 4120 18 300 2140 9 530 3710 16 500 3260 14 500 4630 20 600 5190 23 100

See facing page for footnotes.

G-7



Non-Separable C₀ Basic static load rating 52205280 23 200 78307240 34 800 66907710 29 800 91809850 40 800 11700 51 900 71707320 31 900 12200 54 100 92709730 41 200 13200 58 900 17100 76 100 80308350 35 700 15300 68 100 12000 53 400 18700 83 100 22400 99 400 10200 45 300 20700 91 900 15200 67 500 23800 106 000 27600 123 000

C Basic load rating 1370 5220 23 500 1880 7830 32 200 2000 6690 34 300 2550 9180 43 800 11900 52 800 1900 7170 32 600 11000 49 100 2520 9270 43 300 12800 57 100 15700 69 600 2160 8030 37 100 13800 61 300 12000 53 400 16900 75 100 19400 86 400 10100 44 900 17500 77 900 15400 68 400 21800 97 200 24500 109 000


C₀ Basic static load rating 1600 6430 23 200 2190 9640 34 800 2290 8030 29 800 2930 11000 40 800 11700 51 900 2110 8270 31 900 12200 54 100 2680 10000 41 200 13200 58 900 17100 76 100 2410 9270 35 700 15300 68 100 12000 53 400 18700 83 100 22400 99 400 10200 45 300 20700 91 900 15200 67 500 23800 106 000 27600 123 000

C Basic load rating 7020 1820 27 500 9620 2490 37 600 9920 2570 39 300 12700 50 200 13600 60 500 9340 2420 36 200 12300 54 700 12100 45 900 13600 60 600 16600 74 000 10700 41 300 15300 68 300 13500 60 000 17900 79 400 20500 91 400 11200 49 700 19400 86 100 16300 72 600 23200 103 000 26000 115 000


C₀ Basic static load rating

C Basic load rating

28 600

31 200

8 090

33 900

42 900

42 800

11 100

50 900

35 700 12800 49 000 14000 62 300

44 100

11 400

41 700

56 400 15300 68 100

14 600 3960 17 600

57 100 16300 72 500

36 800 14000 62 500 12400 44 700 14400 63 800 18500 82 400 11100 41 200 17700 78 600 14000 62 400 20100 89 500 24100 107 000 11600 51 800 23600 105 000 16400 73 100 25800 115 000 29900 133 000

41 600 14100 62 700

10 800 3650 16 200

44 200 16800 74 900

53 700 15900 70 700 19400 86 400

13 900 4130 18 400 5030 22 400

55 000 17700 78 700 22800 101 000

47 400 17600 78 300 15600 69 400 20700 91 900 23800 106 000 12700 56 500 22000 97 900 19100 84 800 27100 121 000 30300 135 000

12 300 4560 20 300 4040 18 000 5350 23 800 6150 27 400 3290 14 600 5700 25 400 4940 22 000 7020 31 200 7860 35 000

49 500 21200 94 300 17000 75 700 24400 109 000 29200 130 000 13800 61 500 28000 125 000 20200 90 000 31800 141 000 36800 163 000

Bearing Capacity 500 RPM 3000 Hrs. L-10


Ratings

Series M 45mm, 50 mm, 55 mm Bores

1900

1000

1200

5200 1300 Size relationship

7300

5300

pounds/newtons Formed steel retainer Separable Basic bearing number 1209 5209 1309 7309 5309 1010 1210 5210 1310 7310 5310 1911 1011 1211 5211 1311 7311 5311

C Basic load rating 9670 43 000 15600 69 200 15900 70 800 20300 90 400 24800 111 000 ...... ...... 9830 43 700 15800 70 400 18600 82 500 24000 107 000 29300 131 000 ...... ...... ...... ...... 11700 52 200 19200 85 300 21900 97 500 29300 130 000 38100 169 000

Bearing Capacity 500 RPM 3000 Hrs. L-10 2500 11 100 4030 17 900 4120 18 300 5260 23 400 6440 28 600 ...... ...... 2550 11 300 4100 18 200 4810 21 400 6220 27 700 7600 33 800 ...... ...... ...... ...... 3040 13 500 4960 22 100 5680 25 300 7590 33 800 9860 43 900



Non-Separable C₀ Basic static load rating 12900 57 300 23800 106 000 20400 90 900 28000 124 000 36200 161 000 ...... ...... 13600 60 600 25100 112 000 24000 107 000 33500 149 000 43300 193 000 ...... ...... ...... ...... 16400 73 200 30900 138 000 28800 128 000 41800 186 000 58600 260 000



C₀ Basic static load rating 12900 57 300 23800 106 000 20400 90 900 28000 124 000 36200 161 000 ...... ...... 13600 60 600 25100 112 000 24000 107 000 33500 149 000 43300 193 000 ...... ...... ...... ...... 16400 73 200 30900 138 000 28800 128 000 41800 186 000 58600 260 000

C Basic load rating 12900 57 400 20800 92 300 20600 91 400 26200 117 000 32100 143 000 8840 39 300 13000 58 000 21000 93 400 23900 107 000 31000 138 000 37900 169 000 6960 31 000 11200 49 800 15600 69 200 25400 113 000 26800 119 000 35800 159 000 46500 207 000

Bearing Capacity 500 RPM 3000 Hrs. L-10 3340 14 900 5380 23 900 5320 23 700 6790 30 200 8310 37 000 2290 10 200 3380 15 000 5440 24 200 6200 27 600 8030 35 700 9810 43 600 1800 8 020 2890 12 900 4030 17 900 6590 29 300 6930 30 800 9270 41 200 12000 53 500

C₀ Basic static load rating 14500 64 500 26700 119 000 22000 97 900 30100 134 000 39000 174 000 11100 49 400 15200 67 700 28100 125 000 25900 115 000 36000 160 000 46600 207 000 9570 42 600 14300 63 400 18400 81 800 34600 154 000 28800 128 000 41800 186 000 58600 260 000



C₀ Basic static load rating 16900 75 200 31200 139 000 26700 119 000 36600 163 000 47400 211 000 ...... ...... 18400 82 000 34000 151 000 31400 140 000 4380 195 000 56600 252 000 ...... ...... ...... ...... 22300 99 000 41900 186 000 35000 156 000 50800 226 000 71100 316 000

Selection guide, pages G-5, G-6. Additional information, page G-31. For shaft and housing bearing seat diameters, pages G-25 through G-30.

G-8

Ratings


Separable

Non-Separable


Non-Separable



pounds/newtons Formed steel retainer Separable Basic bearing number

1912

C Basic load rating



Non-Separable C₀ Basic static load rating

...... ...... ...... ...... ...... ...... 1012 ...... ...... ...... ...... ...... ...... 1212 14500 3760 19600 64 600 16 700 87 400 5212 24700 6390 38900 110 000 28 400 173 000 1312 24900 6450 32800 111 000 28 700 146 000 7312 32600 8450 46400 145 000 37 600 206 000 5312 43900 11400 68000 195 000 50 500 302 000 1913 ...... ...... ...... ...... ...... ...... 1013 ...... ...... ...... ...... ...... ...... 1213 16800 4360 24400 74 800 19 400 109 000 5213 26800 6930 44400 119 000 30 800 197 000 1313 30800 7970 41900 137 000 35 400 186 000 7313 39200 10100 57200 174 000 45 100 254 000 5313 54900 14200 88200 244 000 63 200 392 000 1914 ...... ...... ...... ...... ...... ...... 1014 ...... ...... ...... ...... ...... ...... 1214 18100 4700 26300 80 600 20 900 117 000 5214 29900 7750 50100 133 000 34 500 223 000 1314 35300 9130 48800 157 000 40 600 217 000 7314 43800 11300 64400 195 000 50 400 287 000 5314 57600 14900 91700 256 000 66 400 408 000 See facing page for footnotes.

G-9


C Basic load rating

...... ...... ...... ...... 17700 78 900 30100 134 000 30400 135 000 39800 177 000 53600 238 000 ...... ...... ...... ...... 20500 91 400 32700 145 000 37600 167 000 47800 213 000 67000 298 000 ...... ...... ...... ...... 22100 98 500 36600 163 000 43000 191 000 53500 238 000 70400 313 000


...... ...... ...... ...... 4590 20 400 7800 34 700 7880 35 000 10300 45 900 13900 61 700 ...... ...... ...... ...... 5320 23 700 8460 37 600 9730 43 300 12400 55 100 17300 77 200 ...... ...... ...... ...... 5730 25 500 9470 42 100 11100 49 600 13800 61 600 18200 81 100


C Basic load rating

...... ...... ...... ...... 19600 87 400 38900 173 000 32800 146 000 46400 206 000 68000 302 000 ...... ...... ...... ...... 24400 109 000 44400 197 000 41900 186 000 57200 254 000 88200 392 000 ...... ...... ...... ...... 26300 117 000 50100 223 000 48800 217 000 64400 287 000 91700 408 000

7200 32 000 11700 52 200 19400 86 100 32900 146 000 32100 143 000 42100 187 000 56600 252 000 7600 33 800 12000 53 200 21400 95 100 34000 151 000 37600 167 000 47800 213 000 67000 298 000 10900 48 300 14600 64 800 24100 107 000 39700 177 000 43000 191 000 53500 238 000 70400 313 000


1870 8 300 3040 13 500 5020 22 300 8520 37 900 8330 37 000 10900 48 500 14700 65 200 1970 8 750 3100 13 800 5540 24 600 8810 39 200 9730 43 300 12400 55 100 17300 77 200 2810 12 500 3770 16 800 6230 27 700 10300 45 800 11100 49 600 13800 61 600 18200 81 100


10300 45 600 15600 69 200 22100 98 300 43700 194 000 35300 157 000 50000 222 000 73200 326 000 11200 50 000 16300 72 400 25800 115 000 46800 208 000 41900 186 000 57200 254 000 88200 392 000 15800 70 400 18600 82 800 29400 131 000 56000 249 000 48800 217 000 64400 287 000 91700 408 000

C Basic load rating



...... ...... ...... ...... 21700 96 700 36900 164 000 37200 165 000 48700 217 000 65500 291 000 ...... ...... ...... ...... 24700 110 000 39300 175 000 43400 193 000 55300 246 000 77500 345 000 ...... ...... ...... ...... 27900 124 000 45900 204 000 49800 221 000 61800 275 000 81400 362 000

...... ...... ...... ...... 5630 25 000 9570 42 600 9630 42 800 12600 56 100 17000 75 500 ...... ...... ...... ...... 6390 28 400 10200 45 200 11300 50 100 14300 63 700 20100 89 300 ...... ...... ...... ...... 7190 32 000 11900 52 800 12900 57 400 16000 71 300 21100 93 800

...... ...... ...... ...... 25800 115 000 51000 227 000 42900 191 000 60700 270 000 88900 395 000 ...... ...... ...... ...... 31200 139 000 56700 252 000 50900 226 000 69400 309 000 107000 476 000 ...... ...... ...... ...... 35600 158 000 67800 302 000 59200 263 000 78200 348 000 111000 495 000

Ratings


1900

1000

1200


7300

5300

pounds/newtons Formed steel retainer

Basic bearing number 1915 1015 1215 5215 1315 7315 5315 1916 1016 1216 5216 1316 7316 5316 1917 1017 1217 5127 1317 7317 5317

C Basic load rating ...... ...... ...... ...... 18800 83 800 32500 145 000 36600 163 000 48500 216 000 70900 315 000 ...... ...... ...... ...... 20600 91 500 36800 164 000 41500 185 000 55100 245 000 73300 326 000 ...... ...... ...... ...... 24800 110 000 45300 201 000 44600 198 000 61700 275 000 86300 384 000

Separable Bearing Capacity 500 RPM 3000 Hrs. L-10 ...... ...... ...... ...... 4880 21 700 8430 37 500 9470 42 100 12600 55 900 18400 81 700 ...... ...... ...... ...... 5330 23 700 9540 42 400 10800 47 900 14300 63 500 19000 84 400 ...... ...... ...... ...... 6410 28 500 11700 52 200 11500 51 300 16000 71 100 22400 99 500

C₀ Basic static load rating ...... ...... ...... ...... 28000 125 000 56600 252 000 49700 221 000 71500 318 000 116000 518 000 ...... ...... ...... ...... 30100 134 000 63700 283 000 57300 255 000 82400 367 000 119000 528 000 ...... ...... ...... ...... 36700 163 000 79700 354 000 61200 272 000 92900 413 000 143000 636 000


Segmented steel retainer Non-Separable Bearing C₀ Capacity Basic 500 RPM static 3000 Hrs. load L-10 rating ...... ...... ...... ...... ...... ...... ...... ...... 5960 28000 26 500 125 000 10300 56600 45 800 252 000 11600 49700 51 400 221 000 15400 71500 68 300 318 000 22400 116000 99 800 518 000 ...... ...... ...... ...... ...... ...... ...... ...... 6500 30100 28 900 134 000 11600 63700 51 800 283 000 13100 57300 58 400 255 000 17400 82400 77 500 367 000 23200 119000 103 000 528 000 ...... ...... ...... ...... ...... ...... ...... ...... 7830 36700 34 800 163 000 14300 79700 63 700 354 000 14100 61200 62 700 272 000 19500 92900 86 800 413 000 27300 143000 121 000 636 000

C Basic load rating 11200 50 000 15300 68 200 24900 111 000 43000 191 000 44600 199 000 59300 264 000 86600 385 000 11600 51 700 19200 85 300 27200 121 000 48700 216 000 50700 226 000 67300 299 000 89400 398 000 13700 60 900 19700 87 500 31500 140 000 57600 356 000 54400 242 000 75400 335 000 105000 469 000

Bearing Capacity 500 RPM 3000 Hrs. L-10 2910 13 000 3970 17 700 6450 28 700 11100 49 500 11600 51 400 15400 68 300 22400 99 800 3010 13 400 4970 22 100 7040 31 300 12600 56 100 13100 58 400 17400 77 500 23200 103 000 3550 15 800 5100 22 700 8160 36 300 14900 66 300 14100 62 700 19500 86 900 27300 121 000

C₀ Basic static load rating 16900 75 200 20300 90 300 31100 139 000 62900 280 000 49700 221 000 71500 318 000 116000 518 000 18000 80 000 25800 115 000 33400 149 000 70700 315 000 57300 255 000 82400 367 000 119000 528 000 20900 93 100 27000 120 000 38700 172 000 84100 374 000 61200 272 000 92900 413 000 143000 636 000



Bearing Capacity 500 RPM 3000 Hrs. L-10 ...... ...... ...... ...... 7390 32 900 12800 56 800 13400 59 500 17800 79 000 25900 115 000 ...... ...... ...... ...... 7820 34 800 14000 62 300 15200 67 600 20200 89 700 26800 119 000 ...... ...... ...... ...... 9410 41 900 17200 76 500 16300 72 500 22600 100 000 31600 140 000



G-10

Ratings


Separable

Non-Separable


Non-Separable



pounds/newtons Formed steel retainer Separable

Basic bearing number 1918 1018 1218 5218 1318 7318 5318 1919 1019 1219 5219 1319 7319 5319 1920 1020 1220 5220 1320 7320 5320

G-11





Non-Separable











Ratings

Series M 105 mm, 110 mm, 120 mm Bores

1900

1000

1200


7300

5300

pounds/newtons Formed steel retainer Separable Basic bearing number 1921 1021 1221 5221 1321 7321 5321 1922 1022 1222 5222 1322 7322 5322 1924 1024 1224 5224 1324 7324 5324





Non-Separable C₀ Basic static load rating ...... ...... ...... ...... 57800 257 000 132000 588 000 108000 479 000 145000 647 000 204000 906 000 ...... ...... ...... ...... 67300 299 000 147000 653 000 107000 477 000 161000 715 000 244000 1090 000 ...... ...... ...... ...... 77900 347 000 186000 827 000 126000 562 000 193000 861 000 310000 1380 000











G-12

Ratings

Series M 130 mm, 140 mm, 150 mm Bores

Separable

Non-Separable


Non-Separable



pounds/newtons Formed steel retainer Separable Basic bearing number 1926 1026 1226 5226 1326 7326 5326 1928 1028 1228 5228 1328 7328 5328 1930 1030 1230 5230

C Basic load rating ...... ...... ...... ...... 55300 246 000 104000 462 000 100000 446 000 138000 613 000 190000 847 000 ...... ...... ...... ...... 61700 274 000 129000 573 000 111000 495 000 158000 701 000 209000 931 000 ...... ...... ...... ...... 71000 316 000 150000 668 000

Bearing Capacity 500 RPM 3000 Hrs. L-10 ...... ...... ...... ...... 14300 63 700 26900 120 000 25900 115 000 35700 159 000 49300 219 000 ...... ...... ...... ...... 16000 71 100 33400 148 000 28800 128 000 40800 182 000 54200 241 000 ...... ...... ...... ...... 18400 81 800 38900 173 000


G-13



Non-Separable C₀ Basic static load rating ...... ...... ...... ...... 85200 379 000 192000 852 000 151000 674 000 228000 1020 000 346000 1540 000 ...... ...... ...... ...... 95000 422 000 244000 1090 000 170000 756 000 266000 1180 000 383000 1700 000 ...... ...... ...... ...... 111000 492 000 289000 1290 000



C₀ Basic static load rating ...... ...... ...... ...... 85200 379 000 192000 852 000 151000 674 000 228000 1020 000 346000 1540 000 ...... ...... ...... ...... 95000 422 000 244000 1090 000 170000 756 000 266000 1180 000 383000 1700 000 ...... ...... ...... ...... 111000 492 000 289000 1290 000

C Basic load rating 30100 134 000 47500 211 000 67500 300 000 127000 564 000 122000 544 000 168000 749 000 232000 1030 000 31100 138 000 49900 222 000 75300 335 000 157000 699 000 136000 605 000 192000 856 000 256000 1140 000 41800 186 000 56700 252 000 86700 386 000 183000 815 000

Bearing C₀ Capacity Basic 500 RPM static 3000 Hrs. load L-10 rating 7800 47600 34 700 212 000 12300 69100 54 700 307 000 17500 85200 77 800 379 000 32800 192000 146 000 852 000 31700 151000 141 000 674 000 43600 228000 194 000 1020 000 60200 346000 268 000 1540 000 8060 50800 35 900 226 000 12900 75100 57 400 334 000 19500 95000 86 800 422 000 40700 244000 181 000 1090 000 35200 170000 157 000 756 000 49800 266000 222 000 1180 000 66200 383000 295 000 1700 000 10800 68600 48 100 305 000 14700 85800 65 300 382 000 22500 111000 99 900 492 000 47500 289000 211 000 1290 000



C₀ Basic static load rating ...... ...... ...... ...... 104000 463 000 234000 1040 000 182000 808 000 274000 1220 000 415000 1850 000 ...... ...... ...... ...... 116000 516 000 299000 1330 000 204000 907 000 319000 1420 000 460000 2050 000 ...... ...... ...... ...... 135000 601 000 354000 1570 000

Ratings

Series M 160 mm, 170 mm, 180 mm, 190 mm, 200 mm Bores

1900

1000

1200


7300

5300

pounds/newtons Formed steel retainer Separable Bearing C Capacity Basic Basic 500 RPM bearing load 3000 Hrs. number L-10 rating 1932 ...... ...... ...... ...... 1032 ...... ...... ...... ...... 1232 78300 20300 348 000 90 200 5232 174000 45100 775 000 201 000 1934 ...... ...... ...... ...... 1034 ...... ...... ...... ...... 1234 95700 24800 426 000 110 000 5234 202000 52400 900 000 233 000 1936 ...... ...... ...... ...... 1036 ...... ...... ...... ...... 1236 99600 25800 443 000 115 000 5236 195000 50600 870 000 225 000 1938 ...... ...... ...... ...... 1038 ...... ...... ...... ...... 1238 143200 37000 637 000 164 900 5238 242000 62800 1080 000 279 000 1940 ...... ...... ...... ...... 1040 ...... ...... ...... ...... 1240 123000 31900 547 000 142 000 5240 270000 69900 1200 000 311 000



Non-Separable C₀ Basic static load rating ...... ...... ...... ...... 120000 534 000 336000 1490 000 ...... ...... ...... ...... 149000 664 000 391000 1740 000 ...... ...... ...... ...... 159000 708 000 379000 1690 000 ...... ...... ...... ...... 239400 1065000 489000 2170 000 ...... ...... ...... ...... 201000 893 000 551000 2450 000

C Basic load rating ...... ...... ...... ...... 95600 425 000 213000 946 000 ...... ...... ...... ...... 117000 520 000 247000 1100 000 ...... ...... ...... ...... 122000 541 000 239000 1060 000 ...... ...... ...... ...... 175400 780 000 296000 1320 000 ...... ...... ...... ...... 150000 668 000 329000 1460 000

Bearing Capacity 500 RPM 3000 Hrs. L-10 ...... ...... ...... ...... 24800 110 000 55100 245 000 ...... ...... ...... ...... 30300 135 000 64000 285 000 ...... ...... ...... ...... 31500 140 000 61800 275 000 ...... ...... ...... ...... 45600 203 000 76600 341 000 ...... ...... ...... ...... 38900 173 000 85300 379 000

C₀ Basic static load rating ...... ...... ...... ...... 120000 534 000 336000 1490 000 ...... ...... ...... ...... 149000 664 000 391000 1740 000 ...... ...... ...... ...... 159000 708 000 379000 1690 000 ...... ...... ...... ...... 239400 1065000 489000 2170 000 ...... ...... ...... ...... 201000 893 000 551000 2450 000

C Basic load rating 43200 192 000 65000 289 000 99800 444 000 222000 988 000 43700 195 000 81400 362 000 122000 543 000 258000 1150 000 56000 249 000 97900 436 000 122000 541 000 239000 1060 000 56800 253 000 100000 446 000 190600 848 000 296000 1320 000 73700 328 000 121000 538 000 150000 668 000 329000 1460 000


C₀ Basic static load rating 73100 325 000 99800 444 000 127000 565 000 356000 1580 000 75500 336 000 130000 577 000 158000 703 000 414000 1840 000 93700 417 000 154000 685 000 159000 708 000 379000 1690 000 97000 431 000 161000 716 000 267700 1191000 489000 2170 000 125000 556 000 193000 859 000 201000 893 000 551000 2450 000

C Basic load rating ...... ...... ...... ...... 112000 498 000 249000 1110 000 ...... ...... ...... ...... 137000 609 000 290000 1290 000 ...... ...... ...... ...... 136000 607 000 268000 1190 000 ...... ...... ...... ...... 205000 912 000 332000 1480 000 ...... ...... ...... ...... 175000 777 000 383000 1700 000

Bearing Capacity 500 RPM 3000 Hrs. L-10 ...... ...... ...... ...... 29000 129 000 64600 287 000 ...... ...... ...... ...... 35500 158 000 75000 334 000 ...... ...... ...... ...... 35300 157 000 69400 309 000 ...... ...... ...... ...... 53000 236 000 86000 383 000 ...... ...... ...... ...... 45200 201 000 99200 441 000

C₀ Basic static load rating ...... ...... ...... ...... 148000 660 000 415000 1850 000 ...... ...... ...... ...... 184000 820 000 483000 2150 000 ...... ...... ...... ...... 186000 826 000 442000 1970 000 ...... ...... ...... ...... 299000 1330000 570000 254 000 ...... ...... ...... ...... 246000 1090 000 673000 2990 000


G-14


Series M 25 mm, 30 mm, 35 mm, 40 mm Bores Fully Crowned Rollers Precision Ground Ribs Contoured Roller Pockets Rollers Individually Separated Optional Full Complement

Dimensions (inches/mm) A Basic bearing number

Bore diameter

1205 5205 1305

.9843 25.000

7305 5305 1206 5206 1306

1.181 30.000

7306 5306 1207 5207 1307

1.3780 35.000

7307 5307 1208 5208 1308 7308 5308

1.5748 40.000

B

Outside diameter

C

E Max. housing shoulder dia.

Width Plain inner ring

Ribbed inner ring

Plain outer ring

Ribbed outer ring

F

G

Inner ring rib O.D.

Outer ring rib I.D.

H

J

Inner Outer ring ring raceway raceway O.D. I.D.

R

r

Inner

Outer

G

G

Outer Ring & Roller Assembly Under Roller Dia.

Inner Ring & Roller Assembly Over Roller Dia.

2.0472 52.000 2.0472 52.000

.5906 15.000 .8125 20.638

1.20 30.5

1.26 32.0

1.85 47.0

1.76 44.7

1.351 34.32

1.691 42.95

1.2664 32.166

1.7659 44.854

.040 1.02

.040 1.02

1.2677 32.200

1.7646 44.820

2.4409 62.000 2.4409 62.000 2.4409 62.000

.6693 17.000 .8268 21.000 1.0000 25.400

1.24 31.5

1.33 33.8

2.20 55.9

2.10 53.3

1.476 37.49

1.974 50.14

1.3375 33.972

2.1034 53.426

.040 1.02

.040 1.02

1.3388 34.006

2.1021 53.393

2.4409 62.000 2.4409 62.000

.6299 16.000 .9375 23.812

1.42 36.1

1.49 37.8

2.22 56.4

2.12 53.8

1.609 40.87

2.027 51.48

1.4985 38.062

2.1289 54.074

.040 1.02

.040 1.02

1.4999 38.098

2.1275 54.038

2.8346 72.000 2.8346 72.000 2.8346 72.000

.7480 19.000 .9055 23.000 1.1875 30.162

1.49 37.8

1.60 40.6

2.52 64.0

2.37 60.2

1.742 44.25

2.239 56.87

1.6016 40.681

2.3783 60.409

.060 1.52

.040 1.02

1.6029 40.713

2.3770 60.377

2.8346 72.000 2.8346 72.000

.6693 17.000 1.0625 26.988

1.64 41.6

1.73 43.9

2.57 65.3

2.45 62.2

1.862 47.29

2.343 59.51

1.7311 43.970

2.4595 62.471

.040 1.02

.040 1.02

1.7327 44.011

2.4579 62.430

3.1496 80.000 3.1496 80.000 3.1496 80.000

.8268 21.000 1.0236 26.000 1.3750 34.925

1.72 43.7

1.84 46.7

2.81 71.4

2.67 67.8

1.995 50.67

2.538 64.46

1.8442 46.843

2.6749 67.942

.060 1.52

.060 1.52

1.8457 46.880

2.6734 67.905

3.1496 80.000 3.1496 80.000

.7087 18.000 1.1875 30.162

1.86 47.2

1.96 49.8

2.87 72.9

2.74 69.6

2.104 53.44

2.615 66.42

1.9657 49.929

2.7409 69.619

.060 1.52

.040 1.02

1.9673 49.969

2.7393 69.579

3.5433 90.000 3.5433 90.000 3.5433 90.000

.9055 23.000 1.1811 30.000 1.4375 36.512

1.93 49.0

2.05 52.1

3.20 81.3

3.05 77.5

2.244 57.00

2.887 73.33

2.0590 52.299

3.0576 77.663

.060 1.52

.060 1.52

2.0606 52.339

3.0560 77.623


G-15

D Min. Shaft shoulder dia.


Series M 45 mm, 50 mm, 55 mm, Bores Fully Crowned Rollers Precision Ground Ribs Contoured Roller Pockets Rollers Individually Separated Optional Full Complement


Bore diameter

1209

B

Outside diameter

C




Ribbed inner ring

Plain outer ring

Ribbed outer ring

F

G

Inner ring rib O.D.

Outer ring rib I.D.

H

J


R

r

Inner

Outer

G

G



3.3465 85.000 3.3465 85.000

.7480 19.000 1.1875 30.162

2.08 52.8

2.18 55.4

3.08 78.2

2.95 74.9

2.324 59.03

2.827 71.80

2.1858 55.519

2.9523 74.988

.060 1.52

.040 1.02

2.1877 55.568

2.9504 74.939

3.9370 100.000 3.9370 100.000 3.9370 100.000

.9843 25.000 1.2205 31.000 1.5625 39.688

2.20 55.9

2.33 59.2

3.56 90.4

3.38 85.8

2.532 64.31

3.208 81.48

2.3371 59.362

3.3899 86.103

.080 2.03

.060 1.52

2.3389 59.408

3.3881 86.058

1010

3.1496 80.000

.6299 16.000

2.21 56.1

2.27 57.6

2.93 74.4

2.84 72.1

2.379 60.43

2.741 69.62

2.2788 57.882

2.8406 72.151

.060 1.52

.040 1.02

2.2808 57.933

2.8386 72.100

1210

3.5433 90.000 3.5433 90.000

.7874 20.000 1.1875 30.162

2.27 57.6

2.38 60.4

3.26 82.8

3.13 79.5

2.518 63.96

3.018 76.66

2.3803 60.460

3.1317 79.545

.060 1.52

.040 1.02

2.3823 60.511

3.1297 79.494

4.3307 110.000 4.3307 110.000 4.3307 110.000

1.0630 27.000 1.2992 33.000 1.7500 44.450

2.40 61.0

2.56 65.0

3.90 99.1

3.72 94.5

2.781 70.64

3.518 89.36

2.5648 65.146

3.7201 94.490

.080 2.03

.080 2.03

2.5667 65.194

3.7182 94.442

3.1496 80.000 3.5433 90.000

.5118 13.000 .7087 18.000

2.36 59.9 2.44 62.0

2.43 61.7 2.53 64.3

2.96 75.2 3.29 83.6

2.88 73.2 3.17 80.5

2.530 64.26 2.665 67.69

2.789 70.84 3.045 77.34

2.4300 61.722 2.5392 64.496

2.8889 73.378 3.1705 80.531

.040 1.02 .060 1.52

.040 1.02 .040 1.02

2.4323 61.780 2.5415 64.555

2.8866 73.320 3.1682 80.472

3.9370 100.000 3.9370 100.000

.8268 21.000 1.3125 33.338

2.52 64.0

2.63 66.8

3.60 91.4

3.46 87.9

2.785 70.74

3.328 84.53

2.6339 66.901

3.4653 88.019

.080 2.03

.060 1.52

2.6361 66.957

3.4631 87.963

4.7244 120.000 4.7244 120.000 4.7244 120.000

1.1417 29.000 1.4173 36.000 1.9375 49.212

2.62 66.5

2.81 4.28 71.4 108.7

4.07 103.4

3.045 77.34

3.860 98.04

2.8123 4.0790 71.432 103.607

.080 2.03

.080 2.03

2.8144 71.486

4.0769 103.553

5209 1309

1.7717 45.000

7309 5309

5210 1310

1.9685 50.000

7310 5310 1911 1011 1211 5211 1311 7311 5311

2.1654 55.000

Please consult for availability. G Largest fillet radius that will clear bearing corners. Selection guide, pages G-5, G-6. Additional information, page G-31. For shaft and housing bearing seat diameters, pages G-25 through G-30.

G-16


Series M 60 mm, 65 mm, 70 mm Bores Fully Crowned Rollers Precision Ground Ribs Contoured Roller Pockets Rollers Individually Separated Optional Full Complement


Bore diameter

1912 1012 1212 5212

2.3622 60.000

1312 7312 5312 1913 1013 1213 5213

2.5591 65.000

1313 7313 5313 1914 1014 1214 5214 1314 7314 5314

2.7559 70.000

B

Outside diameter

C



Ribbed inner ring

Plain inner ring

Ribbed inner ring

F

G

Inner ring rib O.D.

Outer ring rib I.D.


H

J

R

r

Inner

Outer

G

G



3.3465 85.000 3.7402 95.000

.5118 13.000 .7087 18.000

2.56 65.0 2.64 67.0

2.63 66.8 2.73 69.3

3.16 80.3 3.49 88.6

3.08 78.2 3.36 85.3

2.730 69.34 2.862 72.69

2.989 75.92 3.242 82.35

2.6300 66.802 2.7362 69.499

3.0890 78.461 3.3675 85.534

.040 1.02 .060 1.52

.040 1.02 .040 1.02

2.6324 66.863 2.7385 69.558

3.0866 78.400 3.3652 85.476

4.3307 110.000 4.3307 110.000

.8661 22.000 1.4375 36.512

2.73 69.3

2.84 3.99 72.1 101.3

3.84 97.5

3.029 76.94

3.681 93.50

2.8496 72.380

3.8489 97.762

.080 2.03

.060 1.52

2.8519 72.438

3.8466 97.704

5.1181 130.000 5.1181 130.000 5.1181 130.000

1.2205 31.000 1.4961 38.000 2.1250 53.975

2.87 72.9

3.05 4.64 77.5 117.8

4.42 112.3

3.308 4.187 84.02 106.35

3.0532 4.4286 77.551 112.486

.100 2.54

.080 2.03

3.0554 77.607

4.4264 112.431

3.5433 90.000 3.9370 100.000

.5118 13.000 .7087 18.000

2.76 70.1 2.84 72.1

2.82 71.6 2.93 74.4

3.36 85.3 3.69 93.7

3.28 83.3 3.56 90.4

2.925 74.30 3.060 77.72

2.8250 71.755 2.9332 74.503

3.2841 83.416 3.5646 90.541

.040 1.02 .060 1.52

.040 1.02 .040 1.02

2.8275 71.818 2.9356 74.565

3.2816 83.353 3.5622 90.479

4.7244 120.000 4.7244 120.000

.9055 23.000 1.5000 38.100

3.03 77.0

3.16 4.33 80.3 110.0

4.16 105.7

3.360 3.986 85.34 101.24

3.1662 4.1655 80.421 105.804

.100 2.54

.060 1.52

3.1685 80.480

4.1632 105.745

5.5118 140.000 5.5118 140.000 5.5118 140.000

1.2992 33.000 1.5748 40.000 2.3125 58.738

3.10 78.7

3.29 5.00 83.6 127.0

4.77 121.2

3.571 4.515 90.70 114.68

3.2943 4.7782 83.675 121.366

.100 2.54

.080 2.03

3.2966 83.734

4.7759 121.308

3.9370 100.000 4.3307 110.000

.6299 16.000 .7874 20.000

2.99 75.9 3.05 77.5

3.07 3.72 78.0 94.5 3.15 4.07 80.0 103.4

3.63 92.2 3.93 99.8

3.182 80.82 3.312 84.12

3.520 89.41 3.779 95.99

3.0700 77.978 3.1570 80.188

3.6326 92.268 3.9333 99.906

.040 1.02 .080 2.03

.040 1.02 .040 1.02

3.0728 78.050 3.1597 80.256

3.6298 92.196 3.9306 99.838

4.9213 125.000 4.9213 125.000

.9449 24.000 1.5625 39.688

3.22 81.8

3.33 4.55 84.6 115.6

4.39 111.5

3.528 89.61

4.213 107.01

3.3375 4.3912 84.772 111.536

.100 2.54

.060 1.52

3.3402 84.840

4.3885 111.468

5.9055 150.000 5.9055 150.000 5.9055 150.000

1.3780 35.000 1.6929 43.000 2.5000 63.600

3.32 84.3

3.51 5.34 89.2 135.6

5.09 129.3

3.808 4.811 96.72 122.20

3.5115 5.0935 89.192 129.375

.125 3.18

.080 2.03

3.5141 89.258

5.0909 129.309


G-17


3.184 80.87 3.439 87.35




Bore diameter

1915 1015 1215 5215

2.9528 75.000

1315 7315 5315 1916 1016 1216 5216

3.1496 80.000

1316 7316 5316 1917 1017 1217 5217 1317 7317 5317

3.3465 85.000

B

Outside diameter

C




Ribbed inner ring

Plain inner ring

Ribbed inner ring

F

G

R

r

Inner ring rib O.D.

Outer ring rib I.D.


H

J

Inner

Outer

G

G



4.1339 105.000 4.5276 115.000

.6299 16.000 .7874 20.000

3.18 80.8 3.25 82.6

3.26 3.92 82.8 99.6 3.35 4.27 85.1 108.4

3.82 97.0 4.13 104.9

3.377 3.716 85.78 94.39 3.510 3.977 89.15 101.02

3.2650 3.8276 82.931 97.221 3.3550 4.1314 85.217 104.938

.040 1.02 .080 2.03

.040 1.02 .040 1.02

3.2678 83.003 3.3578 85.288

3.8248 97.149 4.1286 104.867

5.1181 130.000 5.1181 130.000

.9843 25.000 1.6250 41.275

3.37 85.6

3.50 4.73 88.9 120.1

4.55 115.6

3.695 4.380 93.85 111.25

3.5045 4.5583 89.014 115.781

.100 2.54

.060 1.52

3.5073 89.085

4.5555 115.710

6.2992 160.000 6.2992 160.000 6.2992 160.000

1.4567 37.000 1.8110 46.000 2.6875 68.262

3.56 90.4

3.77 5.74 95.8 145.8

5.47 138.9

4.096 5.172 104.04 131.37

3.7764 5.4778 95.920 139.136

.125 3.18

.080 2.03

3.7790 95.987

5.4752 139.070

4.3307 110.000 4.9213 125.000

.6299 16.000 .8661 22.000

3.38 85.8 3.48 88.4

3.46 4.11 87.9 104.4 3.59 4.63 91.2 117.6

4.02 102.1 4.47 113.5

3.572 3.911 90.73 99.34 3.768 4.309 95.71 109.45

3.4600 4.0227 87.884 102.176 3.5950 4.4523 91.313 113.088

.040 1.02 .080 2.03

.040 1.02 .040 1.02

3.4629 87.958 3.5979 91.387

4.0198 102.102 4.4493 113.012

5.5118 140.000 5.5118 140.000

1.0236 26.000 1.7500 44.450

3.59 91.2

3.75 5.09 95.2 129.3

4.90 124.5

3.968 4.700 100.79 119.38

3.7514 4.9078 95.286 124.658

.100 2.54

.080 2.03

3.7542 95.356

4.9050 124.588

6.6929 170.000 6.6929 170.000 6.6929 170.000

1.5354 39.000 1.9291 49.000 2.6875 68.262

3.78 4.00 6.08 96.0 101.6 154.4

5.80 147.3

4.342 5.480 4.0014 110.29 139.19 101.636

5.8041 147.424

.125 3.18

.080 2.03

4.0041 101.704

5.8014 147.356

4.7244 120.000 5.1181 130.000

.7087 18.000 .8661 22.000

3.63 92.2 3.68 93.5

3.72 4.48 94.5 113.8 3.79 4.83 96.3 122.7

4.35 101.5 4.67 118.6

3.851 4.231 97.82 107.47 3.962 4.507 100.63 114.48

3.7250 4.3574 94.615 110.678 3.7920 4.6525 96.317 118.173

.060 1.52 .080 2.03

.040 1.02 .040 1.02

3.7284 94.702 3.7955 96.405

4.3540 110.591 4.6493 118.092

5.9055 150.000 5.9055 150.000

1.1024 28.000 1.9375 49.212

3.86 4.01 5.48 98.0 101.8 139.2

5.28 134.1

4.254 5.056 4.0160 5.2841 108.05 128.42 102.006 134.216

.125 3.18

.080 2.03

4.0193 102.090

5.2808 134.132

7.0868 180.000 7.0866 180.000 7.0866 180.000

1.6142 41.000 2.0079 51.000 2.8750 73.025

4.05 4.27 6.47 102.9 108.4 164.3

6.19 157.2

4.655 5.852 4.2725 118.24 148.64 108.522

.156 3.96

.100 2.54

4.2757 108.604

6.1945 157.340

6.1977 157.422


G-18




Bore diameter

1918 1018 1218 5218

3.5433 90.000

1318 7318 5318 1919 1019 1219 5219

3.7402 95.000

1319 7319 5319 1920 1020 1220 5220 1320 7320 5320

3.9370 100.000

B

Outside diameter

C



Ribbed inner ring

Plain outer ring

Ribbed outer ring

F

G

Inner ring rib O.D.

Outer ring rib I.D.

R

r


H

J

Inner

Outer

G

G



4.9213 125.000 5.5118 140.000

.7087 18.000 .9449 24.000

3.82 3.92 4.67 97.0 99.6 118.6 3.92 4.03 5.18 99.6 102.4 131.6

4.55 115.6 5.03 127.8

4.046 4.446 3.9200 4.5526 102.77 112.92 99.568 115.636 4.229 4.831 4.0300 5.0305 107.42 122.71 102.362 127.775

.060 1.52 .100 2.54

.040 1.02 .060 1.52

3.9236 99.660 4.0335 102.451

4.5490 115.544 5.0270 127.686

6.2992 160.000 6.2992 160.000

1.811 30.000 2.0625 52.388

4.06 4.22 5.81 103.1 107.2 147.6

5.59 142.0

4.495 5.350 114.17 135.89

4.2212 5.5980 107.218 142.189

.125 3.18

.080 2.03

4.2246 107.305

5.5946 142.102

7.4803 190.000 7.4803 190.000 7.4803 190.000

1.6929 43.000 2.1260 54.000 2.8750 73.025

4.26 4.48 6.80 108.2 113.8 172.7

6.51 165.4

4.895 6.148 4.4894 6.5121 124.33 156.16 114.031 165.047

.156 3.96

.100 2.54

4.4927 114.115

6.5088 165.323

5.1181 130.000 5.7087 145.000

.7087 18.000 .9449 24.000

4.02 4.11 4.87 102.1 104.4 123.7 4.11 4.22 5.38 104.4 107.2 136.6

4.74 120.4 5.22 132.6

4.241 4.622 4.1150 4.7476 107.72 117.40 104.521 120.589 4.425 5.027 4.2260 5.2266 112.40 127.68 107.340 132.756

.060 1.52 .100 2.54

.040 1.02 .060 1.52

4.1186 104.613 4.2296 107.432

4.7440 120.497 5.2230 132.664

6.6929 170.000 6.6929 170.000

1.2598 32.000 2.1875 55.562

4.29 4.46 6.18 109.0 113.3 157.0

5.95 151.1

4.765 5.688 4.4692 5.9544 121.03 144.48 113.518 151.242

.125 3.18

.080 2.03

4.4726 113.604

5.9510 151.156

7.8740 200.000 7.8740 200.000 7.8740 200.000

1.7717 45.000 2.2047 56.000 3.0625 77.788

4.53 4.80 7.16 115.1 121.9 181.9

6.83 173.5

5.215 6.468 4.8092 6.8319 132.46 164.29 122.154 173.530

.156 3.96

.100 2.54

4.8125 122.238

6.8286 173.446

5.5118 140.000 5.9055 150.000

.7874 20.000 .9449 24.000

4.22 4.33 5.25 107.2 110.0 133.4 4.31 4.42 5.58 109.5 112.3 141.7

5.10 129.5 5.42 137.7

4.485 4.953 4.3305 5.1078 113.92 125.81 109.995 129.738 4.627 5.220 4.4230 5.4236 117.52 132.59 112.344 137.759

.060 1.52 .100 2.54

.040 1.02 .060 1.52

4.3342 110.088 4.4266 112.435

5.1041 129.645 5.4200 137.668

7.0866 180.000 7.0866 180.000

1.3386 34.000 2.3750 60.325

4.57 4.76 6.58 116.1 120.9 167.1

6.34 161.0

5.057 6.070 4.7640 6.3471 128.45 154.18 121.006 161.216

.156 3.96

.080 2.03

4.7675 121.094

6.3436 161.128

8.4646 215.000 8.4646 215.000 8.4646 215.000

1.8504 47.000 2.3622 60.000 3.2500 82.550

4.82 5.12 7.66 122.4 130.0 194.6

7.27 184.6

5.530 6.892 5.1246 7.2798 140.46 175.06 130.165 184.907

.187 4.75

1.00 2.54

5.1280 130.251

7.2764 184.821


G-19





Bore diameter

1921 1021 1221 5221

4.1339 105.000

1321 7321 5321 1922 1022 1222 5222

4.3307 110.000

1322 7322 5322 1924 1024 1224 5224 1324 7324 5324

4.7244 120.000

B

Outside diameter

C




Ribbed inner ring

Plain outer ring

Ribbed outer ring

F

G

Inner ring rib O.D.

Outer ring rib I.D.

R

r


H

J

Inner

Outer

G

G



5.7087 145.000 6.2992 160.000

.7874 20.000 1.0236 26.000

4.41 4.52 5.44 112.0 114.8 138.2 4.56 4.69 5.91 115.8 119.1 150.1

5.30 134.6 5.74 145.8

4.682 5.150 4.5274 5.3047 118.92 130.81 114.996 134.739 4.901 5.536 4.6910 5.7457 124.48 140.61 119.151 145.941

.060 1.52 .100 2.54

.040 1.02 .080 2.03

4.5311 115.089 4.6947 119.245

5.3010 134.646 5.7420 145.847

7.4803 190.000 7.4803 190.000

1.4173 36.000 2.5625 65.088

4.78 4.98 6.90 121.4 126.5 175.3

6.63 168.4

5.310 6.339 4.9811 6.6363 134.87 161.01 126.520 168.562

.156 3.96

.080 2.03

4.9847 126.611

6.6327 168.470

8.8583 225.000 8.8583 225.000 8.8583 225.000

1.9291 49.000 2.4803 63.000 3.4375 87.312

5.04 5.36 8.01 128.0 136.1 203.4

7.61 193.3

5.794 7.211 5.3616 7.6164 147.17 183.16 136.185 193.456

.187 4.75

.100 2.54

5.3650 136.270

7.6130 193.370

5.9055 150.000 6.6929 170.000

.7874 20.000 1.1024 28.000

4.61 4.72 5.64 117.1 119.9 143.2 4.80 4.93 6.27 121.9 125.2 159.2

5.50 139.7 6.09 154.7

4.879 5.347 4.7242 5.5016 123.93 135.81 119.995 139.741 5.161 5.866 4.9350 6.0923 131.09 149.00 125.349 154.744

.060 1.52 .100 2.54

.040 1.02 .080 2.03

4.7280 120.091 4.9387 125.442

5.4978 139.645 6.0886 154.651

7.8740 200.000 7.8740 200.000

1.4961 38.000 2.7500 69.850

5.01 5.23 7.24 127.2 132.8 183.9

6.93 176.0

5.575 6.631 5.2343 6.9367 141.60 168.43 132.951 176.192

.156 3.96

.080 2.03

5.2379 133.042

6.9331 176.101

9.4488 240.000 9.4488 240.000 9.4488 240.000

1.9685 50.000 2.5591 65.000 3.6250 92.075

5.35 5.71 8.55 135.9 145.0 217.2

8.12 206.2

6.200 7.692 5.7187 8.1235 157.48 195.38 145.255 206.337

.187 4.75

.100 2.54

5.7221 145.341

8.1201 206.251

6.4961 165.000 7.0866 180.000

.8661 22.000 1.1024 28.000

5.11 5.17 6.21 129.8 131.3 157.7 5.20 5.32 6.66 132.1 135.1 169.2

6.06 153.9 6.48 164.6

5.353 5.885 5.1771 6.0624 135.97 149.50 131.498 153.985 5.560 6.256 5.3290 6.4864 141.22 158.90 135.357 164.754

.080 2.03 .125 3.18

.040 1.02 .080 2.03

5.1810 131.597 5.3328 135.452

6.0585 153.886 6.4826 164.659

8.4646 215.000 8.4646 215.000

1.5748 40.000 3.0000 76.200

5.48 5.71 7.83 139.2 145.0 198.9

7.51 190.8

6.075 7.194 5.7141 7.5178 154.30 182.73 145.138 190.952

.187 4.75

.080 2.03

5.7178 145.232

7.5141 190.858

10.2362 2.1654 260.000 55.000 10.2362 2.7953 260.000 71.000 10.2362 4.1250 260.000 104.775

5.82 6.18 9.26 147.8 157.0 135.2

8.78 223.0

6.700 8.315 170.18 211.20

.250 6.35

.100 2.54

6.1856 157.115

8.7780 222.961

6.1820 8.7816 157.023 223.053


G-20




Bore diameter

1926 1026 1226 5226

5.1181 130.000

1326 7326 5326 1928 1028 1228 5228

5.5118 140.000

1328 7328 5328 1930 1030 5.9055 1230 5230

150.000

B

C

Outside diameter



Ribbed inner ring

Plain outer ring

Ribbed outer ring

F

G

Inner ring rib O.D.

Outer ring rib I.D.

R

r


H

J

Inner

Outer

G

G



7.0866 180.000 7.8740 200.000

.9449 24.000 1.2992 33.000

5.48 5.60 6.76 139.2 142.2 171.7 5.63 5.81 7.41 143.0 147.6 188.2

6.60 167.6 7.18 182.4

5.804 6.417 5.6050 6.6065 147.42 162.99 142.367 167.085 6.085 6.913 5.8100 7.1878 154.56 175.59 147.574 182.570

.080 2.03 .125 3.18

.060 1.52 .080 2.03

5.6095 142.481 5.8144 147.686

6.6020 167.691 7.1834 182.458

9.0551 230.000 9.0551 230.000

1.5748 40.000 3.1250 79.375

5.87 6.10 8.42 149.1 154.9 213.9

8.12 206.2

6.485 7.761 6.1013 8.1250 164.72 197.13 154.973 206.375

.187 4.75

.100 2.54

6.1056 155.083

8.1207 206.265

11.0236 2.2835 280.000 58.000 11.0236 2.9528 280.000 75.000 11.0236 4.3750 280.000 111.125

6.31 6.71 10.02 160.3 170.4 254.5

9.55 242.6

7.280 9.046 6.7140 9.5573 184.91 229.77 170.536 242.755

.250 6.35

.125 3.18

6.7181 170.640

9.5532 242.651

7.4803 190.000 8.2677 210.000

.9449 24.000 1.2992 33.000

5.87 6.00 7.15 149.1 152.4 181.6 6.05 6.20 7.80 153.7 157.5 198.1

7.00 177.8 7.58 192.5

6.200 6.803 6.0010 7.0027 157.48 172.80 152.425 177.868 6.478 7.307 6.2030 7.5810 164.54 185.60 157.556 192.557

.080 2.03 .156 3.96

.060 1.52 .080 2.03

6.0057 152.544 6.2076 157.673

6.9980 177.749 7.5764 192.440

9.8425 250.000 9.8425 250.000

1.6535 42.000 3.2500 82.550

6.36 6.63 9.15 161.5 168.4 232.4

8.83 224.3

7.050 8.440 6.6323 8.8353 179.07 214.38 168.460 224.417

.187 4.75

.100 2.54

6.6367 168.573

8.8309 224.304

11.8110 2.4409 300.000 62.000 11.8110 3.2677 300.000 83.000 11.8110 4.5000 300.000 114.300

6.77 7.15 10.68 172.0 181.6 271.3

10.16 258.1

7.755 9.620 7.1529 10.1607 196.98 244.35 181.684 258.082

.312 7.92

.125 3.18

7.1571 181.790

10.1565 257.975

8.2677 210.000 8.8583 225.000

1.1024 28.000 1.3780 35.000

6.36 6.51 7.84 161.5 165.4 199.1 6.47 6.64 8.36 164.3 168.6 212.3

7.66 194.6 8.12 206.2

6.741 7.438 6.5100 7.6689 171.22 188.92 165.354 194.790 6.937 7.832 6.6410 8.1281 176.20 198.93 168.681 206.454

.125 3.18 .156 3.96

.080 2.03 .080 2.03

6.5153 165.488 6.6463 168.816

7.6636 194.656 8.1228 206.319

10.6299 270.000 10.6299 270.000

1.7717 45.000 3.5000 88.900

6.86 7.14 9.88 174.2 181.4 251.0

9.52 241.8

7.600 9.095 7.1474 9.5218 193.04 231.01 181.544 241.854

.250 6.35

.100 2.54

7.1524 181.672

9.5168 241.726

See facing page for footnotes

G-21



Series M 160 mm, 170 mm, 180 mm, 190 mm, 200 mm Bores Fully Crowned Rollers Precision Ground Ribs Contoured Roller Pockets Rollers Individually Separated Optional Full Complement


Bore diameter

1932 1032 6.2992 1232

160.000

5232 1934 1034 6.6929 1234

170.000

5234 1936 1036 7.0866 1236

180.000

5236 1938 1038 7.4803 1238

190.000

5238 1940 1040 7.8740 1240 5240

200.000

B

Outside diameter

C




Ribbed inner ring

Plain outer ring

Ribbed outer ring

F

G

Inner ring rib O.D.

Outer ring rib I.D.

R

r


H

J

Inner

Outer

G

G



8.6614 220.000 9.4488 240.000

1.1024 28.000 1.4961 38.000

6.76 6.90 8.24 171.7 175.3 209.3 6.91 7.08 8.92 175.5 179.8 226.6

8.06 204.7 8.66 220.0

7.136 7.833 6.9050 8.0641 181.25 198.96 175.387 204.828 7.400 8.353 7.0840 8.6690 187.96 212.17 179.934 220.193

.125 3.18 .156 3.96

.080 2.03 .080 2.03

6.9105 175.526 7.0894 180.071

8.0586 204.689 8.6636 220.056

11.4173 290.000 11.4173 290.000

1.8898 48.000 3.8750 98.425

7.31 7.62 10.61 185.7 193.5 269.5

10.22 259.6

8.105 205.87

9.757 7.6234 10.2246 247.83 193.634 259.705

.250 6.35

.100 2.54

7.6286 193.767

10.2194 259.572

9.0551 230.000 10.2362 260.000

1.1024 28.000 1.6535 42.000

7.15 7.30 8.63 181.6 185.4 219.2 7.41 7.61 9.61 188.2 193.3 244.1

8.45 214.6 9.31 236.5

7.531 8.228 7.3000 8.4593 191.29 208.99 185.420 214.866 7.965 8.969 7.6150 9.3193 202.31 227.81 193.421 236.710

.125 3.18 .187 4.75

.080 2.03 .080 2.03

7.3057 185.564 7.6205 193.560

8.4536 214.722 9.3138 236.571

12.2047 2.0472 310.000 52.000 12.2047 4.1250 310.000 104.775

7.76 8.08 11.32 197.1 205.2 287.5

10.93 277.6

8.625 10.423 8.0899 219.08 264.74 205.483

10.9344 277.734

.250 6.35

.125 3.18

8.0952 205.618

10.9291 277.599

9.8425 250.000 11.0236 280.000

1.2992 33.000 1.8110 46.000

7.60 7.78 9.38 193.0 197.6 238.2 7.86 8.09 10.35 199.6 205.5 262.9

9.15 232.4 10.02 254.5

8.055 8.885 7.7800 9.1592 204.60 225.68 197.612 232.644 8.478 9.638 8.0940 10.0217 215.34 244.80 205.588 254.551

.156 3.96 .187 4.75

.080 2.03 .080 2.03

7.7858 197.760 8.0997 205.733

9.1534 232.496 10.0160 254.406

12.5984 320.000 12.5984 320.000

2.0472 52.000 4.2500 107.950

8.17 8.51 11.74 207.5 216.2 298.2

11.36 288.5

9.050 10.849 8.5153 11.3600 229.87 275.56 216.289 288.544

.250 6.35

.125 3.18

8.5208 216.428

11.3545 288.405

10.2362 260.000 11.4173 290.000

1.2992 33.000 1.8110 46.000

7.99 7.17 9.78 202.9 182.1 248.4 8.25 8.48 10.74 209.6 215.4 272.8

9.55 242.6 10.41 264.4

8.453 9.283 8.1779 9.5578 214.71 235.79 207.719 242.768 8.895 10.009 8.4880 10.4164 225.93 254.23 215.595 264.576

.156 3.96 .187 4.75

.080 2.03 .080 2.03

8.1844 207.884 8.4944 215.758

9.5513 242.603 10.4100 264.413

13.3858 2.1654 340.000 55.000 13.3858 4.5000 340.000 114.300

8.66 9.02 12.63 12.19 220.1 229.1 320.37 309.63

9.610 11.436 9.0266 12.1938 244.11 290.48 229.276 309.723

.312 7.42

.125 3.18

9.0326 229.428

12.1878 309.570

11.0236 280.000 12.2047 310.000

1.4961 38.000 2.0079 51.000

8.48 8.66 10.49 215.4 220.0 266.4 8.70 8.96 11.47 221.0 227.6 291.3

10.24 260.1 11.12 282.4

8.976 9.930 8.6600 10.2463 227.99 252.22 219.964 260.256 9.394 10.692 8.9640 11.1223 238.61 271.58 227.686 282.506

.187 4.75 .187 4.75

.080 2.03 .080 2.03

8.6667 220.134 8.9705 227.850

10.2396 260.086 11.1158 282.342

14.1732 2.2835 360.000 58.000 14.1732 4.7500 360.000 120.650

9.15 9.53 13.17 232.4 242.1 334.5

12.70 322.6

10.135 12.134 9.5353 12.7028 257.43 308.20 242.197 322.651

.312 7.92

.125 3.18

9.5416 242.357

12.6965 322.491


G-22


Series M 25 thru 60 mm Bore Double Row Fully Crowned Rollers Contoured Roller Pockets Rollers Individually Separated

Dimensions (inches/mm) A Basic bearing number 6205 6206 6207 6208 6209 6210 6211 6212

Bore diameter .9843 25.000 1.1811 30.000 1.3780 35.000 1.5748 40.000 1.7717 45.000 1.9865 50.000 2.1654 55.000 2.3622 60.000

B

Outside diameter 2.0472 52.000 2.4409 62.000 2.8346 72.000 3.1496 80.000 3.3465 85.000 3.5433 90.000 3.9370 100.000 4.3307 110.000

C

Width

1.6250 41.275 1.8750 47.625 2.1250 53.975 2.3750 60.325 2.3750 60.325 2.3750 60.325 2.6250 66.675 2.8750 73.025

D

E

Min. Min. shaft housing shoulder shoulder dia. dia. 1.20 30.5 1.42 36.1 1.64 41.6 1.86 47.2 2.08 52.8 2.27 57.6 2.52 64.0 2.73 69.3

1.85 47.0 2.22 56.4 2.57 65.3 2.87 72.9 3.08 78.2 3.26 82.8 3.60 87.9 3.99 101.3

H

J

R

r

Inner ring raceway O.D.

Outer ring raceway I.D.

Inner

Outer

G

1.2664 32.166 1.4985 38.062 1.7311 43.970 1.9657 49.929 2.1858 55.519 2.3803 60.460 2.6339 66.901 2.8496 72.380

1.7659 44.854 2.1289 54.074 2.4595 62.471 2.7409 69.619 2.9523 74.988 3.1317 79.545 3.4653 88.019 3.8489 97.762

.040 1.02 .040 1.02 .040 1.02 .060 1.52 .060 1.52 .060 1.52 .080 2.03 .080 2.03


G-23

G


C Basic load rating



.040 1.02 .040 1.02 .040 1.02 .040 1.02 .040 1.02 .040 1.02 .060 1.52 .060 1.52

1.2677 32.200 1.4999 38.098 1.7327 44.011 1.9673 49.969 2.1877 55.568 2.3823 60.511 2.6361 66.957 2.8519 72.438

10200 45400 15500 69000 19400 86300 24600 109000 26700 119000 27100 121000 32900 146000 42300 188000

2640 11700 4010 17800 5020 22300 6370 28300 6910 30700 7020 31200 8520 37900 10900 48500

15700 69900 24300 108000 30600 136000 41300 184000 47500 211000 50300 224000 61900 275000 77700 346000


Series M 65 thru 95 mm Bore Double Row Fully Crowned Rollers Contoured Roller Pockets Rollers Individually Separated

Dimensions (inches/mm) A Basic bearing number 6213 6214 6215 6216 6217 6218 6219

Bore diameter 2.5591 65.000 2.7559 70.000 2.9528 75.000 3.1496 80.000 3.3465 85.000 3.5433 90.000 3.7402 95.000

B

Outside diameter 4.7244 120.000 4.9213 125.000 5.1181 130.000 5.5118 140.000 5.9055 150.000 6.2922 160.000 6.6929 170.000

C

Width

3.0000 76.200 3.1250 79.375 3.2500 82.550 3.5000 88.900 3.8750 98.425 4.1250 104.775 4.3750 111.125

D

E

Min. Min. shaft housing shoulder shoulder dia. dia. 3.03 77.00 3.22 81.8 3.37 85.6 3.59 91.2 3.86 98.0 4.06 103.1 4.29 109.0

4.33 110.0 4.55 115.6 4.73 120.1 5.09 129.3 5.48 101.8 5.81 147.6 6.18 157.0

H

J

R

r

Inner ring raceway O.D.

Outer ring raceway I.D.

Inner

Outer

G

4.1655 105.804 4.3912 111.536 4.5583 115.781 4.9078 124.658 5.2841 134.216 5.5980 142.189 5.9544 151.242

.100 2.54 .100 2.54 .100 2.54 .100 2.54 .125 3.18 .125 3.18 .125 3.18

3.1662 80.421 3.3375 84.772 3.5045 89.014 3.7514 95.286 4.0160 102.006 4.2212 107.218 4.4692 113.518

G


C Basic load rating



.060 1.52 .060 1.52 .060 1.52 .080 2.03 .080 2.03 .080 2.03 .080 2.03

3.1685 80.480 3.3402 84.840 3.5073 89.085 3.7542 95.356 4.0193 102.090 4.2246 107.305 4.4726 113.604

45900 204000 51300 228000 55800 248000 63100 281000 77600 345000 87400 389000 100000 445000

11900 53000 13300 59200 14400 64100 16300 72500 20100 89400 22600 101000 25900 115000

88700 395000 100000 445000 113000 503000 127000 565000 159000 708000 178000 792000 206000 917000


G-24

Shaft Bearing Seat Diameters For Cylindrical Roller Bearings

Bearing bore tolerances are in accord with the system of tolerancing established by the International Standards Organization (ISO) and adopted by the American Bearing Manufacturers Association (ABMA) and the American National Standards Institute (ANSI).

right. A graphic relationship of various shaft fits is illustrated in the figure at the left.

A system of limits and fits has been established by ISO for shafts. A portion of this system has been adopted by ABMA to provide flexibility in selecting shaft fits. Shaft fits are designated by a lower case letter and a number, such as h6. The letter indicates the location of the shaft tolerance limits with respect to the nominal bearing bore. The number indicates the size of the tolerance zone. Shaft fits recommended for various types of applications are listed in the table at

Many factors influence the proper fit of the bearing inner ring on a shaft. The magnitude of the load and its direction with respect to bearing inner or outer rings are generally the first factors considered in shaft fit selection. The effects of other factors such as vibration, shock, temperature, speed, etc., are of secondary importance but sometimes need to be considered. Where assembly or disassembly requirements are of prime importance special shaft fits may be required. Appropriate diameter shafting is determined (as shown) from the tables below.

Class of fit and shaft diameters (inches/µm) Bearing/Shaft diameter fits G Bearing series 1000, 1200, 1300, 1900, 5200, 5300, 7300

Nominal bearing bore and shaft diameter

Tolerance

Tolerance

Fit

.0004T .0005L 10T 13L .0005T .0006L 12T 16L

–.0000 –.0005 +0 –13 +.0000 –.0006 +0 –16

.0011T .0003T 27T 8T .0013T .0004T 33T 9T

+.0007 +.0003 +17 +8 +.0008 +.0004 +20 +9

+.0000 –.0006

.0006T .0007L 15T 19L

+.0000 +.0007 +0 –19

.0016T .0005T 39T 11T

+.0010 +.0005 +24 +11

+0 –20

+.0000 –.0008

.0008T .0009L 20T 22L

–.0000 –.0009 +0 –22

.0019T .0005T 48T 13T

+.0011 +.0005 +28 +13

+0 –25

+.0000 –.0010

.0010T .0010L 25T 25L

–.0000 –.0010 +0 –25

.0023T .0006T 58T 15T

+.0013 +.0006 +33 +13

+0 –30

+.0000 –.0012

.0012T .0012L 30T 29L

+.0000 –.0012 +0 –29

.0026T .0006T 67T 17T

+.0014 +.0006 +37 +17

mm

inches

µm

inches

04 05 06

20.000 25.000 30.000

.7874 .9843 1.1811

+0 –10

+.0000 –.0004

07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 28 30 32 34 36

35.000 40.000 45.000 50.000 55.000 60.000 65.000 70.000 75.000 80.000 85.000 90.000 95.000 100.000 105.000 110.000 120.000 130.000 140.000 150.000 160.000 170.000 180.000

1.3780 1.5748 1.7717 1.9685 2.1654 2.3622 2.5591 2.7559 2.9528 3.1496 3.3465 3.5433 3.7402 3.9370 4.1339 4.3307 4.7244 5.1181 5.5118 5.9055 6.2992 6.6929 7.0866

+0 –12

+.0000 –.0005

+0 –15

38 40

190.000 200.000

7.4803 7.8740

G-25

m5

Shaft dia.

Basic size


h6

Bearing bore toleranceg

Fit

Shaft dia.

Class of fit selection Nominal shaft dia.

Operating conditions K

mm

Inner ring stationary in relation to direction of load Inner ring rotating in relation to direction of load (Normal load m=0.18C)V

h6

All diameters 17-40 40-65 65-140 140-200 35-65 65-140 140-200

Inner ring rotating in relation to direction of load (Heavy load >.018C)V

Bearing series 1000, 1200, 1300, 1900, 5200, 5300, 7300

Class of fit

inches

0.67-1.57 1.57-2.56 2.56-5.52 5.52-7.88 1.37-2.56 2.56-5.52 5.52-7.88

m5 m6 n6 p6 n6 p6 r6

Tap fit inner ring Press fit inner ring Heavy press fit inner ring

Bearing/Shaft diameter fits G m6

n6

Tolerance

p6

Tolerance

...... ...... ......

Shaft dia. ...... ...... ......

+.0010 +.0004 +25 +9

.0018T .0007T 46T 17T

.0018T .0005T 45T 11T

+.0012 +.0005 +30 +11

17 thru 24

.0022T .0005T 55T 13T

26 thru 36

r6

Tolerance

Tolerance

...... ...... ......

Shaft dia. ...... ...... ......

...... ...... ......

Shaft dia. ...... ...... ......

+.0013 +.0007 +33 +17

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

.0021T .0008T 54T 20T

+.0015 +.0008 +39 +20

.0027T .0014T 66T 32T

+.0021 +.0014 +51 +32

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

+.0014 +.0005 +35 +13

.0027T .0010T 65T 23T

+.0019 +.0010 +45 +23

.0033T .0016T 79T 37T

+.0025 +.0016 +59 +37

.0037T .0020T 96T 54T

+.0029 +.0020 +76 +54

.0026T .0006T 65T 15T

+.0016 +.0006 +40 +15

.0032T .0012T 77T 27T

+.0022 +.0012 +52 +27

.0038T .0018T 93T 43T

+.0028 +.0018 +68 +43

.0045T .0025T 118T 68T

+.0035 +.0025 +93 +68

.0030T .0006T 76T 17T

+.0018 +.0006 +46 +17

.0038T .0014T 90T 31T

+.0026 +.0014 +60 +31

.0044T .0020T 109T 50T

+.0032 +.0020 +79 +50

.0054T .0030T 136T 77T

+.0042 +.0030 +106 +77

...... ...... ......

Shaft dia. ...... ...... ......

07 thru 10

.0015T .0004T 38T 9T

11 thru 16

Basic size

Fit

04 05 06

38 40

Remarks

Fit

Fit

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

Fit

G Symbol L indicates a loose or clearance fit. Symbol T indicates a tight or interference fit. The appropriate shaft diameter for any class of fit can be easily determined by applying the shaft tolerance to the nominal shaft diameter. Example: (Using basic bearing size 03 and fit class h6)

Nominal shaft diameter Shaft diameter tolerance

inches = .6693 .6693 = +.0000 –.0004

Resultant shaft diameter = .6693 1 µm = .001 mm K For solid steel shafts. V C = Basic load rating of bearing.

.6689

mm = 17.000 17.000 = + 0.000␣ – 0.010 = 17.000 16.989

g The arithmetical mean of the largest and smallest single diameter to be within tolerance shown. Allowable deviations from mean diameter per ANSI/ABMA STD 20, latest printing.

G-26

Housing Bearing Seat Diameters For Cylindrical Roller Bearings A system of limits and fits has been established by ISO for holes. A portion of this system has been adopted by ABMA to provide flexibility in selecting housing fits. Housing fits are designated by a capital letter and a number such as H7. The letter indicates the location of the housing bore tolerance limits with respect to the nominal bearing O.D. The number indicates the size of the tolerance zone.

Bearing outside diameter tolerances are in accord with the system of tolerancing established by the International Standards Organization (ISO) and adopted by the American Bearing Manufacturers Association (ABMA) and the American National Standards Institute (ANSI).

Housing fits recommended for various types of applications are listed in the table at the right. A graphic relationship of various housing fits is illustrated in the figure at the left. The class of fit is determined by nature of loading (oscillating, vibrating, reversing, etc.), axial movement requirements, temperature conditions, housing material and cross section of housing.

Shaft expansion increases bearing center distances and requires all but one bearing on a shaft to be movable axially in the housing. In most bearings the outer rings are subjected to stationary loads which permit a loose housing fit. Operating temperature may affect the housing fit, as the housing may dissipate heat rapidly and not expand with the outer ring. However, the loose fit must never be greater than necessary. Excessive looseness results in less accurate shaft centering and additional ring deformation under load. The appropriate housing bores are determined (as shown) from the tables below.

Class of fit and housing bores (inches/µm) Bearing/Housing diameter fitsG

1900

Bearing series 1000 1200 5200

... ... ... 911

... ... ... 010

205 206 207 208

304 305 306 307

52 62 72 80

2.0472 2.4409 2.8346 3.1496

912 913 ... 914 915 916 ... 917

... 011 012 013 ... 014 015 ...

209 210 ... 211 ... 212 ... 213

... 308 ... 309 ... 310 ... 311

85 90 95 100 105 110 115 120

918 919 920 921 922

016 017 018 019 020

214 215 216 ... 217

... 312 313 ... 314

... 924 ... 926

021 ... 022 024

218 ... 219 220

928 ... 930 ... 932 ... 934 ... 936

... 026 028 ... ... 030 ... 032 ...

938 ... 940 ... ... ... ... ... ...

1300 5300 7300

Nominal bearing O.D. and housing bore

Bearing O.D. toleranceg +.0000 –.0005 +0 –13

H7 Tolerance Housing Fit bore .0000 –.0000 .0017L +.0012 0 –0 43L +30

J7 Tolerance Housing Fit bore .0004T –.0004 .0013L ≠.0008 12T –12 31L –18

N7 Tolerance Housing Fit bore .0002L –.0003 .0015T –.0015 4L –9 39T –39

3.3465 3.5433 3.7402 3.9370 4.1339 4.3307 4.5276 4.7244

+.0000 –.0006 +0 –15

.0000 .0020L 0 50L

–.0000 +.0014 –0 +35

.0005T .0015L 13T 37L

–.0005 +.0009 –13 +22

.0002L .0018T 5L 45T

–.0004 –.0018 –10 –45

125 130 140 145 150

4.9213 5.1181 5.5118 5.7087 5.9055

+.0000 –.0008 +0 –20

.0000 .0024L 0 61L

–.0000 +.0016 –0 +41

.0006T .0018L 14T 44L

–.0006 +.0010 –14 +26

.0002L .0022T 6L 52T

–.0006 –.0022 –12 –52

315 ... 316 317

160 165 170 180

6.2992 6.4961 6.6929 7.0866

+.0000 –.0010 +0 –25

.0000 .0026L 0 65L

–.0000 +.0016 –0 +40

.0006T .0020L 14T 51L

–.0006 +.0010 –14 +26

.0004L .0022T 13L 57T

–.0006 –.0022 –12 –52

221 222 ... 224 ... ... 226 ... 228

318 319 ... 320 321 ... 322 ... ...

190 200 210 215 220 225 230 240 250

7.4803 7.8740 8.2677 8.4646 8.6614 8.8583 9.0551 9.4488 9.8425

+.0000 –.0012 +0 –30

.0000 .0030L 0 76L

–.0000 +.0018 –0 +46

.0007T .0023L 16T 60L

–.0007 +.0011 –16 +30

.0004L .0026T 16L 60T

–.0008 –.0026 –14 –60

034 ... 036 038 ... 040

... 230 ... 232 ... 234

324 ... 326 ... 328 ...

260 270 280 290 300 310

10.2362 10.6299 11.0236 11.4173 11.8110 12.2047

+.0000 –.0014 +0 –35

.0000 .0034L 0 87

–.0000 +.0020 –0 +52

.0007T .0027L 16T 71L

–.0007 +.0013 –16 +36

.0006L .0028T 21L 66T

–.0008 –.0028 –14 –66

... ... ...

236 238 240

330 ... ...

320 340 360

12.5984 13.3858 14.1732

+.0000 –.0016 +0 –40

.0000 .0038L 0 97L

–.0000 +.0022 –0 +57

.0007T .0030L 8T 79L

–.0007 +.0014 –18 +39

.0008L .0030T 24L 73T

–.0008 –.0030 –16 –73

Basic size

mm

inches

1 µm = .001 mm l Minimum housing bore is same as ABMA fit class; tolerance is within ABMA range. K Style A outer ring has oversize O.D. designed to give a heavy press fit with a tap fit housing bore. Inner ring to be press fit; see pages G-25, G-26 for values. g The arithmetical mean of the largest and smallest single diameter to be within tolerance shown. Allowable deviations from mean diameter per ANSI/ABMA STD 20, latest printing.

G-27

Class of fit selection Class of fit

Operating conditions

Remarks


H7

Push fit outer ring for non-separable bearing styles Mu…UV and MU…UM


J7l

Tap fit outer ring

Housing rotating in relation to direction of load

N7l L

Press fit outer ring Heavy press fit with Style A outer ring

Heavy press fit with style A outer ring (inches/µm) 1900

Bearing series 1000

1200 5200

1300 5300 7300

Nominal bearing O.D. and housing bore Style A outer ring

...

Basic size ... 205

304

mm 52.024

inches 2.0482

...

...

206

305

62.029

2.4421

...

...

207

306

72.032

2.8359

911

010

208

307

80.035

3.1510

912

...

209

...

85.039

3.3480

913

011

210

308

90.040

3.5449

...

012

...

...

95.044

3.7419

914

013

211

309

100.046

3.9388

915

...

...

...

105.049

4.1358

916 ... 917

014 015 ...

212 ... 213

310 ... 311

110.056 115.057 120.056

4.3329 4.5298 4.7266

918 919 920 921 922

016 017 018 019 020

214 215 216 ... 217

... 312 313 ... 314

125.059 130.058 140.058 145.067 150.066

4.9236 5.1204 5.5141 5.7113 5.9081

Bearing O.D. toleranceg

+.0000 –.0005 +0 –13

+.0000 –.0006 +0 –15

+.0000 –.0008

Bearing/Housing diameter fitsG Tolerance Housing Fit bore .0000 0 –.0005 .0014T 35T –.0014 .0001T 2T –.0006 .0016T 40T –.0016 .0002T 5T –.0007 .0017T 43T –.0017 .0003T 7T –.0008 .0018T 45T –.0018

–13 –35 –15 –40 –18 –43 –20 –45

.0004T .0020T .0005T .0021T .0006T .0022T .0007T .0023T .0008T .0024T

10T 50T 13T 53T 15T 56T 18T 58T 20T 61T

–.0010 –.0020 –.0011 –.0021 –.0012 –.0022 –.0013 –.0023 –.0014 –.0024

–25 –50 –28 –53 –30 –56 –33 –58 –35 –61

.0009T .0027T

23T 69T

–.0017 –.0027

–38 –69

.0009T .0029T

23T 74T

–.0017 –.0029

–43 –74

+0

.0010T

25T

–.0018

–45

–20

.0032T

81T

–.0032

–81

+.0000 –.0010 +0 –25

.0010T .0034T

25T 86T

–.0020 –.0034

–50 –86

.0011T .0037T .0012T .0038T .0013T .0039T .0013T .0041T .0014T .0042T .0015T .0043T .0015T .0045T

28T 94T 30T 97T 33T 99T 33T 104T 36T 107T 38T 109T 38T 114T

–.0023 –.0037 –.0024 –.0038 –.0025 –.0039 –.0025 –.0041 –.0026 –.0042 –.0027 –.0043 –.0027 –.0045

–58 –94 –60 –97 –63 –99 –63 –104 –66 –107 –68 –109 –68 –114

... 924 ... 926

021 ... 022 024

218 ... 219 220

315 ... 316 317

160.071 165.072 170.071 180.071

6.3020 6.4989 6.6957 7.0894

928

...

221

318

190.076

7.4833

...

026

222

319

200.078

7.8771

930

028

...

...

210.081

8.2709

... 932 ...

... ... 030

224 ... ...

320 ... 321

215.087 220.088 225.090

8.4680 8.6649 8.8618

934 ... 936

... 032 ...

226 ... 228

... 322 ...

230.091 240.096 250.096

9.0587 9.4526 9.8463

938 ... 940

034 ... 036

... 230 ...

324 ... 326

260.101 270.101 280.101

10.2402 10.6339 11.0276

+.0000 –.0014

.0015T .0047T

38T 119T

–.0029 –.0047

–73 –119

...

038

232

...

290.109

11.4216

+0 –35

.0016T .0050T

41T 127T

–.0030 –.0050

–76 –127

... ...

... 040

... 234

328 ...

300.111 310.111

11.8154 12.2091

.0017T .0051T

43T 130T

–.0031 –.0051

–78 –130

... ... ...

... ... ...

236 238 240

330 ... ...

320.121 340.121 360.124

12.6032 13.3906 14.1781

.0017T .0055T .0018T .0056T

43T 140T 46T 142T

–.0033 –.0055 –.0043 –.0056

–83 –140 –86 –142

G Symbol L indicates a loose or clearance fit. Symbol T indicates a tight or interference fit. The appropriate housing bore for any class of fit can be easily determined by applying the housing tolerance to the nominal housing bore. Example: (Using basic bearing size 926 and fit class N7)

+.0000 –.0012 +0 –30

+.0000 –.0016 +0 –40

Nominal housing bore Housing bore tolerance Resultant housing bore

inches = 7.0866 7.0866 = – .0006 – .0022 = 7.0860 7.0844

= = =

mm 180.000 180.000 – ␣ .012 – ␣ .052 179.988 179.948

G-28

Operation Without Inner Ring For Cylindrical Roller Bearings

Outer ring and roller assembly

Hardness factor If operation at rated capacity is desired when cylindrical roller bearings are used with either ring omitted, the surface on which the rollers operate must have a hardness of Rockwelll C59 to C64 or equivalent BrinellL hardness (see chart at right). If this hardness cannot be attained, the bearing C capacity must be reduced by a rating reduction factor determined from chart on facing page.

for Series M-EX, M-EAX, M-EB, M-EAB, M-TV, M-TAV, M-UV and M-UAV Cylindrical roller bearings with the inner ring omitted may be installed so that the rollers operate directly on the surface of the shaft. This type of design is useful for applications where space is limited or a larger shaft is required. Surface hardness of shaft must be Rockwell C59 to C64 to achieve full bearing capacity. Where the required hardness cannot be attained, the bearing rating must be reduced accordingly. Where the shaft is case hardened, the combination of case depth and core hardness must be adequate. Consult Link-Belt Bearing Division, Rexnord Corp. for a specific recommendation. Shaft surface should be finished to a roughness value of 13 micro-inches, RMS, maximum (.33 µm). Maximum and minimum shaft diameter values for tap fit and press fit outer rings are listed below.

Shaft diameter for press fit outer ring

Shaft diameters for tap fit outer ringG Bearing series

1900

1000

Basic size

1200-5200

1300-5300-7300

(max-min)

1900

1000

inches

1200-5200

1300-5300-7300

(max-min)

03 04 05 06

...... ...... .9769 .9765 1.1759 1.1754 1.3710 1.3705

.8757 .8753 1.0329 1.0325 1.2259 1.2254 1.4523 1.4518

.8725 .8721 1.1092 1.1087 1.2672 1.2667 1.4994 1.4989

.9803 .9799 1.1013 1.1008 1.3383 1.3378 1.6024 1.6019

...... ...... .9762 .9758 1.1753 1.1748 1.3704 1.3699

.8750 .8746 1.0322 1.0318 1.2253 1.2248 1.4515 1.4510

.8718 .8714 1.1085 1.1080 1.2665 1.2660 1.4986 1.4981

.9796 .9792 1.1005 1.1000 1.3376 1.3371 1.6016 1.6011

07 08 09 10

1.6112 1.8061 2.0263 2.2014

1.6107 1.8056 2.0258 2.2008

1.6611 1.8777 2.0831 2.2802

1.6606 1.8772 2.0825 2.2796

1.7322 1.9667 2.1870 2.3816

1.7317 1.9662 2.1864 2.3810

1.8452 2.0600 2.3382 2.5660

1.8447 2.0595 2.3376 2.5654

1.6104 1.8054 2.0255 2.2006

1.6099 1.8049 2.0250 2.2000

1.6603 1.8770 2.0823 2.2794

1.6598 1.8765 2.0817 2.2788

1.7314 1.9660 2.1861 2.3807

1.7309 1.9655 2.1855 2.3801

1.8444 2.0590 2.3373 2.5651

1.8439 2.0585 2.3367 2.5645

11 12 13 14

2.4316 2.6316 2.8267 3.0719

2.4310 2.6310 2.8261 3.0712

2.5408 2.7377 2.9348 3.1588

2.5402 2.7371 2.9341 3.1581

2.6354 2.8511 3.1677 3.3392

2.6348 2.8505 3.1670 3.3385

2.8136 3.0545 3.2957 3.5132

2.8130 3.0538 3.2950 3.5125

2.4308 2.6307 2.8258 3.0710

2.4302 2.6301 2.8252 3.0703

2.5398 2.7368 2.9339 3.1579

2.5392 2.7362 2.9332 3.1572

2.6344 2.8502 3.1668 3.3381

2.6338 2.8496 3.1661 3.3374

2.8127 3.0534 3.2946 3.5120

2.8121 3.0527 3.2939 3.5113

15 16 17 18

3.2669 3.4619 3.7274 3.9225

3.2662 3.4612 3.7267 3.9217

3.3569 3.5969 3.7944 4.0324

3.3562 3.5962 3.7936 4.0316

3.5063 3.7532 4.0182 4.2235

3.5056 3.7525 4.0174 4.2227

3.7780 4.0031 4.2746 4.4915

3.7772 4.0023 4.2738 4.4907

3.2660 3.4610 3.7265 3.9214

3.2653 3.4603 3.7258 3.9206

3.3560 3.5958 3.7933 4.0313

3.3553 3.5951 3.7925 4.0305

3.5052 3.7520 4.0171 4.2224

3.5045 3.7513 4.0163 4.2216

3.7769 4.0020 4.2735 4.4902

3.7761 4.0012 4.2727 4.4894

19 20

4.1174 4.1166 4.3330 4.3322

4.2284 4.2276 4.4254 4.4246

4.4714 4.4706 4.7663 4.7655

4.8113 4.8105 5.1267 5.1258

For shaft diameters larger than above, consult Link-Belt Bearing Division. G Shaft diameter limits also apply to Style A outer ring bearings. K Hultgren 10 mm ball penetrator; 3000 kg load. k Brale penetrator; 150 kg load.

G-29

4.1163 4.1155 4.3319 4.3311

4.2273 4.2265 4.4243 4.4235

4.4703 4.4695 4.7652 4.7644

4.8099 4.8091 5.1254 5.1245

Operation Without Outer Ring For Cylindrical Roller Bearings

Inner ring and roller assembly for Series MU-X, MU-B Cylindrical roller bearings with the outer ring omitted may be installed so that the rollers operate directly on the hardened and ground surface of a bore in an alloy steel housing. This type of design is useful for applications where space is limited and a smaller housing bore or a larger bearing and shaft are required. Housing surface hardness must be Rockwelll C59 to C64 or Brinell L equivalent to achieve full bearing capacity. Where the required hardness cannot be attained, the bearing rating must be reduced accordingly. See graph for rating reduction factor. Where the housing bore is case hardened, the combination of case depth and core hardness must be adequate. Consult Link-Belt Bearing Division, Rexnord Corp. for a specific recommendation. Housing surface should be finished to a roughness value of 13 micro-inches, A.A., maximum (.33 µm). Maximum and minimum housing bore values for tap fit and press fit inner rings are listed below.

Housing bore for press fit inner ring

Housing bore for tap fit inner ring Bearing series

1900

1000

Basic size

1200-5200

1300-5300-7300

(max-min)

1900

1000

inches

1200-5200

1300-5300-7300

(max-min)

03 04 05 06

...... 1.2689 1.4680 1.6631

...... 1.2685 1.4675 1.6626

1.1992 1.4383 1.6314 2.9090

1.1988 1.4379 1.6309 1.9085

1.3708 1.6075 1.7656 2.1285

1.3704 1.6070 1.7651 2.1280

1.5402 1.7305 2.1031 2.3780

1.5398 1.7300 2.1026 2.3775

...... ...... 1.2694 1.2690 1.4686 1.4681 1.6637 1.6632

1.1996 1.4388 1.6320 1.9096

1.1992 1.4384 1.6315 1.9091

1.3712 1.6080 1.7661 2.1291

1.3708 1.6075 1.7656 2.1286

1.5406 1.7309 2.1036 2.3785

1.5402 1.7304 2.1031 2.3780

07 08 09 10

1.9346 1.9341 2.2116 2.2111 2.4317 2.4312 2.6068 2.6062

2.1594 2.3760 2.6430 2.8400

2.1589 2.3755 2.6424 2.8394

2.4591 2.7405 2.9517 3.1311

2.4586 2.7400 2.9511 3.1305

2.6745 3.0572 3.3894 3.7195

2.6740 3.0567 3.3888 3.7189

1.9353 2.2123 2.4325 2.6077

1.9348 2.2118 2.4320 2.6071

2.1600 2.3767 2.6438 2.8409

2.1595 2.3762 2.6432 2.8403

2.4597 2.7411 2.9526 3.1319

2.4592 2.7406 2.9520 3.1313

2.6751 3.0578 3.3902 3.7203

2.6746 3.0573 3.3896 3.7197

11 12 13 14

2.8881 3.0882 3.2832 3.6316

2.8875 3.0876 3.2826 3.6309

3.1697 3.3668 3.5639 3.9323

3.1691 3.3662 3.5632 3.9316

3.4646 3.8481 4.1649 4.3902

3.4640 3.8475 4.1642 4.3895

4.0784 4.4280 4.7775 5.0926

4.0778 4.4273 4.7768 5.0919

2.8892 3.0893 3.2843 3.6329

2.8886 3.0887 3.2837 3.6322

3.1707 3.3678 3.5649 3.9337

3.1701 3.3672 3.5642 3.9330

3.4656 3.8491 4.1658 4.3915

3.4650 3.8485 4.1651 4.3908

4.0793 4.4289 4.7758 5.0938

4.0787 4.4282 4.7778 5.0931

15 16 17 18

3.8266 4.0217 4.3561 4.5512

3.8259 4.0210 4.3554 4.5504

4.1304 g 4.6515 5.0292

4.1297 g 4.6507 5.0284

4.5573 4.9068 5.2829 5.5968

4.5566 4.9061 5.2821 5.5960

5.4770 5.8033 6.1966 6.5109

5.4762 5.8025 6.1958 6.5101

3.8280 4.0230 4.3578 4.5529

3.8273 4.0223 4.3571 4.5521

4.1317 4.1310 g g 4.6772 4.6764 5.0309 5.0301

4.5585 4.9081 5.2845 5.5984

4.5578 4.9074 5.2837 5.5976

5.4782 5.4774 5.8045 5.8037 6.1981 6.1973 6.5124 6.5116

19 20

4.7463 4.7455 5.1064 5.1056

5.2253 g

5.2245 g

5.9532 6.3459

5.9524 6.3451

6.8308 7.2787

6.8300 7.2778

4.7480 5.1082

4.7472 5.1074

5.2269 5.2261 g g

5.9548 5.9540 6.3474 6.3466

6.8322 6.8314 7.2802 7.2793

For housing bores larger than above, consult Link-Belt Bearing Division, Rexnord Corp. g For size, consult Link-Belt Bearing Division, Rexnord Corp. K Hultgren 10 mm ball penetrator; 3000 kg load. k Brale penetrator; 150 kg load.

G-30


Series M1000, 1200, 1300, 1900, 5200, 5300, 7300 Availability:

Operation:

Not all series, sizes, configurations and special features of these cylindrical roller bearings are in regular production. A current list of sizes and types regularly available can be furnished. Others can be made available for production requirements.

Cylindrical roller bearings are designed for grease or oil lubrication. Oil is most commonly used. Service instructions are available and provide guidelines for lubrication and recommended lubricants. Where significant thrust loads are to be carried, lubrication becomes more critical and Link-Belt Bearing Division should be consulted.

Additional Features: Cylindrical roller bearings are available with many combinations of standard features. The nomenclature page G-32 and the index pages G-3 and G-4 all describe standard features which result in cylindrical roller bearings being extremely versatile for specific applications. For other mounting aids such as dowel coin holes and snap rings and grooves, consult Link-Belt Bearing Division.

Imposed radial loads should not exceed .25C. Where high radial loads, high speeds, thrust loads or vibratory loads are unavoidable, consult the Link-Belt Bearing Division.

Fixed and Expansion Mounting: The design of cylindrical roller bearings and the optional features permits fixed or expansion mounting by varying the number of ribs used with each bearing.

A bearing with no ribs on the ring (i.e. MA1200TV of MU1200CX) is an expansion type bearing as the roller set is free to shift axially on one raceway. The opposite bearing must then be a locating bearing. Many other arrangements are possible using these same principles. Care should always be taken not to force bearings to thrust against or away from each other during mounting or operation.

Fits and Tolerances: Shaft and housing fits are listed on pages G-25 through G-30.

Operation without one or both rings: Cylindrical rollers will run using correctly manufactured shafts or housings as raceways. For this procedure, consult Link-Belt Bearing Division.

Warning: The reliability built into all Link-Belt bearings can be realized in service only when they are correctly selected and properly installed, protected and maintained.

Housings and covers must be designed to safely handle the radial and axial loads involved. Adequate space must be provided in the housing and covers for a supply of lubricant.

The correct selection of bearings requires that the magnitude and nature of all loads, speeds, alignment, mounting, operating requirements, and maintenance be adequately considered. The selection of materials for and design of housings, shafting, fasteners, seals, and accessories as well as provisions for installation and maintenance must follow good engineering principles.

Seals must be provided that will satisfactorily cope with the environmental conditions. Shaft O.D. size and housing bore size tables show recommended fitting practices, and should be followed strictly to assure a successful mounting arrangement.

G-31

Service instructions are provided with shipments of bearings and are available on request. These instructions provide detailed information to aid in proper installation, operation, and maintenance, and should be carefully read and followed. Failure to do so may result in unsatisfactory service as well as serious personal injury or property damage.

Nomenclature

Series M1000, 1200, 1300, 1900, 5200, 5300, 7300 Cylindrical Roller Bearing Symbol M A R SN U S None 6

Description

Plain cylindrical inner ring Single rib inner ring Short, single rib w/inner ring side plate Double rib inner ring

0 2 3 9

Extra light series Light series Medium series Extra extra light series

X M V B

1

2

Omitted if inner ring not furnished

One-fifth of bore diameter (mm) Snap ring groove in outer ring O.D. Two snap ring grooves in outer ring O.D. Snap ring groove in outer ring O.D. snap ring included Two snap ring grooves in outer ring O.D.; snap rings included Plain cylindrical outer ring Single rib outer ring Double rib outer ring Short single rib w/outer ring side plate Outer ring w/two retaining rings in I.D. Single rib outer ring, one retaining ring in I.D. Oversize O.D. outer ring Blind dowel hole in outer ring O.D.

Omitted if outer ring not furnished

Segmented retainer Full complement (no retainer) Formed steel retainer Polymeric retainer

W101 W102 W103 W104 W105 W106 W107 W108 W110 W111 W112 W121 W122 W131 W132 W133 W140 W141 W142 W143

Inner ring bore radius to clear .060" shaft fillet Inner ring bore radius to clear .080" shaft fillet Inner ring bore radius to clear .100" shaft fillet Inner ring bore radius to clear .125" shaft fillet Inner ring bore radius to clear .156" shaft fillet Inner ring bore radius to clear .187" shaft fillet Inner ring bore radius to clear .250" shaft fillet Inner ring with double bore radius, standard shaft fillet radius Outer ring with reduced width tolerance Outer ring width .0787" oversize (symmetrical ring) Outer ring width .1575" oversize (symmetrical ring) Outer ring width .0787" oversize and inner ring bore radius clear .060" fillet Outer ring width .1575" oversize and inner ring bore radius clear .156" fillet I.R. bore radius to clear .060" shaft fillet both sides I.R. bore radius to clear .080" shaft fillet both sides I.R. bore radius to clear .100" shaft fillet both sides O.R. snap ring groove on side opposite rib ring O.R. snap ring groove on side opposite rib ring with W131 I.R. O.R. snap ring groove on side opposite rib ring with W132 I.R. O.R. snap ring groove on side opposite rib ring with W133 I.R.

None C2 C0 C3 C4 C5

Standard commercial clearance Less than basic clearance Basic clearance Greater than basic clearance Greater than C3 clearance Greater than standard clearance (STANDARD FOR ASSEMBLY WITH “A” OUTER RING AND OMITTED IN MODEL NUMBER) Special specific clearance or range—i.e./C002 or/C35-49 or C3549

Cxxx

05 GEA X / W101/ C0

Metric bore size of next smaller bearing Standard capacity High capacity series Narrow width Wide width Intermediate width

G GG R RR C D E SN T U A H

A

Metric series designation

1 5 7

05

M

The nomenclature is provided to indentify the basic and optional features of bearing and mounted unit assemblies. The most commonly specified variations are listed; however, availability of all variations cannot be assumed. Link-Belt Bearing Division should be consulted regarding optional features, availability,and the application requirements.

G-32


Series N-EC 200E, 300E Cylindrical Roller Bearings ®

The Link-Belt N-EC series builds on a tradition of quality, service and reliability – the reasons so many engineering professionals have come to rely on Link-Belt bearings. The N-EC extra capacity cylindrical product line is U.S. manufactured to both ISO 9001 and QS 9000 quality standards. It is quality and availability your company and your customers can count on. The N-EC delivers – extra capacity bearings when you want them with the quality you have come to expect.

Other Standard Features:

Engineering Expertise

a The Link-Belt Extra Capacity design performs at higher speeds and heavier loads with no increase in external bearing boundary dimensions. Where you need greater performance, the N-EC delivers. b Bearing roller cages are made of high quality bronze alloys. The bronze roller cage offers a proven design with superior guidance, performance and durability. These features provide superior quiet performance and life in electric motor applications. c The Link-Belt N-EC line offers standard C0 or C3 increased clearance when your application requires it. d Precision machining tolerances to ISO 9001 and QS 9000 standards assure the interchangeability of bearing races and roller sets increasing your flexibility. This feature allows for reduced inventory and increased service when ring interchangeability can be used. e The N-EC product is available in our warehouse locations nationwide. Service and product availability you can expect from a U.S. based manufacturer is what the N-EC is all about.

Decades of experience, extensive research and ongoing commitment to quality have resulted in the most sophisticated bearing technology on the market today. Link-Belt N-EC bearings perform beyond expectations because of these features:

Proven Pocket Design An exclusive gothic arch roller pocket geometry s the roller at two points, resulting in superior hydrodynamic lubrication, providing high RPM capabilities.

Super Finish Microfinished roller and raceways improve lubrication under high speeds and loads with proven and tested quiet operation.

Crowned Profile The roller’s outside diameter surface is crowned to optimize line . This equalizes load distribution and minimizes stress caused by minor misalignments.

Improved Design Roller end tolerances, ring rib design and finishes have been designed to improve bearing performance under heavy axial load conditions.

Tight Tolerances All bearings are made to ISO Normal (RBEC-1) tolerances or higher if specified.

G-33

Cylindrical Roller Bearings C

Series N-EC

C

C

C

200E R

R A

B

r

R A

B

B

r NJ

R A

r NU

A

B

r NUP

N

Dimensions (inches/mm) (pounds/newtons) Basic bearing number

A Bore diameter

B Outside diameter

C Width

Basic load rating

Static load rating

R

r

Inner

Outer

G

G

205E

0.984 (25.00)

2.047 (52.00)

0.591 (15.00)

6,492 (28,800)

6,808 (30,200)

0.039 (1.00)

0.039 (1.00)

206E

1.181 (30.00)

2.441 (62.00)

0.630 (16.00)

8,566 (38,000)

8,792 (39,000)

0.039 (1.00)

0.039 (1.00)

207E

1.378 (35.00)

2.835 (72.00)

0.669 (17.00)

11,136 (49,400)

11,542 (51,200)

0.043 (1.10)

0.043 (1.10)

208E

1.575 (40.00)

3.150 (80.00)

0.709 (18.00)

12,151 (53,900)

12,827 (56,900)

0.043 (1.10)

0.043 (1.10)

209E

1.772 (45.00)

3.346 (85.00)

0.748 (19.00)

13,661 (60,600)

15,577 (69,100)

0.043 (1.10)

0.043 (1.10)

210E

1.969 (50.00)

3.543 (90.00)

0.787 (20.00)

15,352 (68,100)

16,546 (73,400)

0.043 (1.10)

0.043 (1.10)

211E

2.165 (55.00)

3.937 (100.00)

0.827 (21.00)

18,959 (84,100)

22,160 (98,300)

0.059 (1.50)

0.059 (1.50)

212E

2.362 (60.00)

4.331 (110.00)

0.866 (22.00)

21,957 (97,400)

23,670 (105,000)

0.059 (1.50)

0.059 (1.50)

213E

2.559 (65.00)

4.724 (120.00)

0.906 (23.00)

24,166 (107,200)

26,871 (119,200)

0.059 (1.50)

0.059 (1.50)

214E

2.756 (70.00)

4.921 (125.00)

0.945 (24.00)

26,984 (119,700)

31,041 (137,700)

0.059 (1.50)

0.059 (1.50)

215E

2.953 (75.00)

5.118 (130.00)

0.984 (25.00)

29,644 (131,500)

35,505 (157,500)

0.059 (1.50)

0.059 (1.50)

216E

3.150 (80.00)

5.512 (140.00)

1.024 (26.00)

32,913 (146,000)

40,577 (180,000)

0.079 (2.00)

0.079 (2.00)

217E

3.346 (85.00)

5.906 (150.00)

1.102 (28.00)

40,803 (181,000)

50,271 (223,000)

0.079 (2.00)

0.079 (2.00)

218E

3.543 (90.00)

6.299 (160.00)

1.181 (30.00)

42,200 (187,200)

50,947 (226,000)

0.079 (2.00)

0.079 (2.00)

219E

3.740 (95.00)

6.693 (170.00)

1.260 (32.00)

51,398 (228,000)

61,542 (273,000)

0.083 (2.10)

0.083 (2.10)

220E

3.937 (100.00)

7.087 (180.00)

1.339 (34.00)

57,710 (256,000)

69,883 (310,000)

0.083 (2.10)

0.083 (2.10)

221E

4.134 (105.00)

7.480 (190.00)

1.417 (36.00)

60,460 (268,200)

71,979 (319,300)

0.083 (2.10)

0.083 (2.10)

222E

4.331 (110.00)

7.847 (200.00)

1.496 (38.00)

66,344 (294,300)

60,280 (267,400)

0.083 (2.10)

0.083 (2.10)

224E

4.724 (120.00)

8.465 (215.00)

1.575 (40.00)

77,299 (342,900)

97,362 (431,900)

0.083 (2.10)

0.083 (2.10)

226E

5.118 (130.00)

9.055 (230.00)

1.575 (40.00)

81,064 (359,600)

103,269 (458,100)

0.118 (3.00)

0.118 (3.00)

228E

5.512 (140.00)

9.499 (240.00)

1.654 (42.00)

88,593 (393,000)

115,555 (512,600)

0.118 (3.00)

0.118 (3.00)

230E

5.906 (150.00)

10.630 (270.00)

1.772 (45.00)

100,947 (447,800)

135,708 (602,000)

0.118 (3.00)

0.118 (3.00)

232E

6.299 (160.00)

11.417 (290.00)

1.890 (48.00)

113,436 (503,200)

153,832 (682,400)

0.118 (3.00)

0.118 (3.00)

Static and dynamic capacities are calculated in accordance with ISO76 and ISO281. GLargest fillet radius that will clear bearing corners.

G-34


C

C

C

C

R

R

R

R

Series N-EC 300E A

B

A

B

r

r NJ

A

B

r NU

A

B

r NUP

N

Dimensions (inches/mm) (pounds/newtons) Basic bearing number

A Bore diameter

B Outside diameter

C Width

Basic load rating

Static load rating

R

r

Inner

Outer

G

G

305E

0.984 (25.00)

2.441 (62.00)

0.669 (17.00)

9,197 (40,800)

8,318 (36,900)

0.043 (1.10)

0.043 (1.10)

306E

1.181 (30.00)

2.835 (72.00)

0.748 (19.00)

11,587 (51,400)

10,866 (48,200)

0.043 (1.10)

0.043 (1.10)

307E

1.378 (35.00)

3.150 (80.00)

0.827 (21.00)

15,780 (70,000)

16,456 (73,000)

0.059 (1.50)

0.059 (1.50)

308E

1.575 (40.00)

3.543 (90.00)

0.906 (23.00)

19,838 (88,000)

20,514 (91,000)

0.059 (1.50)

0.059 (1.50)

309E

1.772 (45.00)

3.937 (100.00)

0.984 (25.00)

22,543 (100,000)

22,069 (97,900)

0.059 (1.50)

0.059 (1.50)

310E

1.969 (50.00)

4.331 (110.00)

1.063 (27.00)

26,826 (119,000)

28,404 (126,000)

0.079 (2.00)

0.079 (2.00)

311E

2.165 (55.00)

4.724 (120.00)

1.142 (29.00)

31,447 (139,500)

32,507 (144,200)

0.079 (2.00)

0.079 (2.00)

312E

2.362 (60.00)

5.118 (130.00)

1.220 (31.00)

35,843 (159,000)

40,577 (180,000)

0.083 (2.10)

0.083 (2.10)

313E

2.559 (65.00)

5.512 (140.00)

1.299 (33.00)

41,614 (184,600)

44,635 (198,000)

0.083 (2.10)

0.083 (2.10)

314E

2.756 (70.00)

5.906 (150.00)

1.378 (35.00)

46,889 (208,000)

52,164 (231,400)

0.083 (2.10)

0.083 (2.10)

315E

2.953 (75.00)

6.299 (160.00)

1.457 (37.00)

55,455 (246,000)

60,460 (268,200)

0.083 (2.10)

0.083 (2.10)

316E

3.150 (80.00)

6.693 (170.00)

1.535 (39.00)

59,761 (265,100)

66,208 (293,700)

0.083 (2.10)

0.083 (2.10)

317E

3.346 (85.00)

7.087 (180.00)

1.614 (41.00)

67,403 (299,000)

75,969 (337,000)

0.118 (3.00)

0.118 (3.00)

318E

3.543 (90.00)

7.480 (190.00)

1.693 (43.00)

72,362 (321,000)

83,048 (368,400)

0.118 (3.00)

0.118 (3.00)

319E

3.740 (95.00)

7.847 (200.00)

1.772 (45.00)

77,209 (342,500)

89,044 (395,000)

0.118 (3.00)

0.118 (3.00)

320E

3.937 (100.00)

8.465 (215.00)

1.850 (47.00)

89,089 (395,200)

99,639 (442,000)

0.118 (3.00)

0.118 (3.00)

321E

4.134 (105.00)

8.858 (225.00)

1.929 (49.00)

99,549 (441,600)

112,940 (501,000)

0.118 (3.00)

0.118 (3.00)

322E

4.331 (110.00)

9.499 (240.00)

1.969 (50.00)

105,884 (469,700)

122,520 (543,500)

0.118 (3.00)

0.118 (3.00)

324E

4.724 (120.00)

10.236 (260.00)

2.165 (55.00)

121,664 (539,700)

140,487 (623,200)

0.118 (3.00)

0.118 (3.00)

326E

5.118 (130.00)

11.024 (280.00)

2.283 (58.00)

141,569 (628,000)

169,364 (751,300)

0.157 (4.00)

0.157 (4.00)

328E

5.512 (140.00)

11.811 (300.00)

2.441 (62.00)

129,261 (573,400)

187,308 (830,900)

0.157 (4.00)

0.157 (4.00)

330E

5.906 (150.00)

12.598 (320.00)

2.559 (65.00)

176,172 (781,500)

217,831 (966,300)

0.157 (4.00)

0.157 (4.00)

332E

6.299 (160.00)

13.386 (340.00)

2.677 (68.00)

198,738 (881,600)

244,026 (1,082,500)

0.157 (4.00)

0.157 (4.00)

Static and dynamic capacities are calculated in accordance with ISO76 and ISO281. GLargest fillet radius that will clear bearing corners.

G-35

Nomenclature

Series NE-C Spherical Roller Bearings Symbol

Description

N NU NJ NUP

Separable Separable Separable Separable

2 3

200 Series 300 Series

08

2

08

E

M

C3

One-fifth of bore diameter

E

Extra capacity

M P V

Machined bronze cage Polymeric cage Formed steel

C0 C3

N

bearing with double-ribbed inner ring* cylindrical inner ring single-ribbed inner ring inner ring with end plate*

Standard clearance Increased clearance

* Consult factory for availability. The nomenclature shown is provided to identify the basic and optional features of bearing and mounted unit assemblies. The most commonly specified variations are listed; however, availability of all variations cannot be assumed. Link-Belt Bearing Division should be consulted regarding optional features, availability, and the application requirements.

G-36


Contents

Series A20000

Series A20000


Introduction .................................. H-1 A20000S Selection .................................. H-3 Load Ratings ........................... H-5 Dimensions .............................. H-6 A20000, A20000M Selection .................................. H-7 Load Ratings ........................... H-9 Dimensions ............................. H-11 Additional Information ............... H-15 Nomenclature ............................. H-16

Self-aligning separable outer ring bearings of single row adjustable and double row adjustable or nonadjustable types for high capacity and minimum space requirements. These compact bearings feature the latest design refinements.

a Controlled raceway curvatures afford precise osculation clearance to avoid edge loading and provide high capacity. b Roller guidance is provided by double contoured coined steel retainer pockets. c Large rollers for extended bearing life. d Micro-finished raceways assure smooth operation.

a

b

c

d

H-1

Rollers

ties.

Retainers

Symmetrical roller design permits natural roller positioning and distribution of load in dynamic operation. Curvatures of roller surfaces are contoured to control stress distribution under all combinations of radial and thrust loads within design capaci-

Rings

Double contoured deep coined pockets provide accurate roller guidance. Separate retainer for each row of rollers allows rollers to seek ultimate rolling path and operating angle for all radial/ thrust load conditions.

The geometry and sections of the outer and inner rings and rollers result in high capacity and long bearing life. Controlled raceway curvatures on inner and outer rings and rollers afford precise osculation clearances preventing roller edge loading. Outer ring raceways are spherically finished to provide freedom of alignment under variable conditions.

Single Row Adjustable A20000S Single-row self-aligning adjustable spherical roller bearing for direct shaft mounting. Available with bores from 1.0000" (25.400 mm) to 4.1331" (104.981 mm) inclusive. Dimensions on pages H-6. Load ratings on pages H-5. Additional information on page H-

15.

Double Row Adjustable A20000 Double-row self-aligning adjustable spherical roller bearing for direct shaft mounting. Available with bores from 1.0000" (25.400 mm) to 4.7236" (119.979 mm) inclusive. Dimensions on pages H-11 and H-

12. Load ratings on pages H-9 and H-10. Additional information on page H15.

Double Row Non-Adjustable A20000M Double-row self-aligning nonadjustable spherical roller bearings for direct shaft mounting. Available with bores from 1.0000" (25.4 mm) to 4.1331" (104.981 mm) inclusive. Dimensions on pages H-13 and H14. Load ratings on pages H-9 and H-10. Additional information on page H15. H-2

Selection

Series A20000S A20000S single row angular spherical roller bearings are suitable for a wide variety of mounting arrangements. In the application of these bearings, it is important to consider that radial loads produce a thrust reaction which must be opposed by another force…usually the thrust reaction from another bearing. This force maintains the bearing rings in their correct operating position. Normally, two single

row angular bearings are mounted opposed to one another on a common shaft. As thrust or thrust reactions are always present, it is advisable to calculate both bearing lives concurrently. The selection procedures and rating formulas shown here are in agreement with The American Bearing Manufacturers Association Standards and ANSI/

Bearing Selection (pair of bearings) Step 1 Determine an appropriate L₁₀ design life. Operating time, Type of service hours per year Light seasonal usage Heavy seasonal usage Industrial—8 hour shift Industrial—16 hour shift Industrial—continuous Continuous—high reliability Step 2 Determine a required

500 to 750 1,400 to 1,600 2,000 4,000 8,700 —

Design life, years 3-5 4-6 10 10 10 —

L₁₀ design life, hours 3,000 8,000 20,000 40,000 80,000 to 100,000 120,000 to 300,000

from Table 1.

Step 3 Determine a required shaft diameter and make a temporary selection for each bearing to fit this shaft. Step 4 Calculate each induced thrust reaction TF from the radial loads F r on each bearing. TF = 0.5 Fr Y2 This reaction is directed along the shaft and tends to separate the individual inner ring and roller assemblies from their outer rings. Step 5 Calculate resultant bearing thrust load Fa. F a = TF + T TF is the thrust reaction from the opposite single row angular bearing. The applied thrust load T is positive (+) if in the same direction as TF, and negative (–) if in the opposite direction. If F a is negative, substitute zero for F a. Step 6 Calculate the ratio of the resultant bearing thrust load Fa to the radial load Fr for each bearing.

Step 7 Calculate the equivalent radial load P for both trial bearings. P = XFr + YFa If

is equal to or less than e, then P = X1Fr + Y1Fa where X₁ = 1.0 Y₁ = 0

If

is greater than e, then P = X2Fr + Y2Fa.

For values of e, X2, and Y2, see the bearing rating table, page H-5. Step 8 Calculate the required C rating of each bearing to the trial selections. required C =

P using

from Step 2

Consult the bearing rating table to see if the selected bearings meet or exceed the required C in each case.

H-3

ABMA STD 11-1990. Ratings are based on fatigue life. The Rating Life L₁₀ or fatigue life at 90% reliability is the usual basis for bearing selection. To assure a satisfactory bearing application, fitting practice, mounting, lubrication, sealing, static rating, housing strength, operating conditions and maintenance must be considered.

basic formulas:

Selection

Series 20000S

=

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

1.93 2.11 2.25 2.38 2.59 2.77 2.93 3.07 3.19 3.31 3.42 3.65 3.86 4.04 4.20 4.36 4.50 4.75 4.97 5.18 5.36 5.54 6.25 6.81

200

300

TF =

n T 60

0.5 Fr Y2

This reaction is directed along the shaft and tends to separate the individual inner ring and roller assemblies from their outer rings. Step 2 Calculate each resultant bearing thrust load Fa. Fa = TF + T TF is the thrust reaction from the opposite single row angular bearing. The applied thrust load T is positive (+) if in the same direction as TF, and negative (–) if in the opposite direction. If Fa is negative, substitute zero for Fa.

400

500

600

700

800

2.38 2.93 3.31 3.61 2.59 3.19 3.61 3.93 2.77 3.42 3.86 4.20 2.93 3.61 4.07 4.44 3.19 3.93 4.44 4.84 3.42 4.20 4.75 5.18 3.61 4.44 5.02 5.47 3.78 4.65 5.25 5.73 3.93 4.84 5.47 5.96 4.07 5.02 5.66 6.18 4.20 5.18 5.85 6.37 4.50 5.54 6.25 6.81 4.75 5.85 6.60 7.20 4.97 6.12 6.92 7.54 5.18 6.37 7.20 7.85 5.36 6.60 7.46 8.13 5.54 6.81 7.70 8.39 5.85 7.20 8.13 8.86 6.12 7.54 8.51 9.28 6.37 7.85 8.86 9.66 6.60 8.13 9.18 10.00 6.81 8.39 9.48 10.30 7.70 9.48 10.70 11.70 8.39 10.30 11.70 12.70

3.86 4.20 4.50 4.75 5.18 5.54 5.85 6.12 6.37 6.60 6.81 7.29 7.70 8.06 8.39 8.69 8.97 9.48 9.92 10.30 10.70 11.00 12.50 13.60

4.07 4.44 4.75 5.02 5.47 5.85 6.18 6.47 6.73 6.97 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.00 10.50 10.90 11.30 11.70 13.20 14.40

4.27 4.65 4.97 5.25 5.73 6.12 6.47 6.77 7.05 7.30 7.54 8.06 8.51 8.92 9.28 9.61 9.92 10.50 11.00 11.40 11.80 12.20 13.80 15.00

4.44 4.84 5.18 5.47 5.96 6.37 6.73 7.05 7.34 7.60 7.85 8.39 8.86 9.28 9.66 10.00 10.30 10.90 11.40 11.90 12.30 12.70 14.40 15.70

Speed, n

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

T 1,000,000

Step 1 Calculate each induced thrust reaction TF from the radial loads Fr on each bearing.

Speed, n 100

L₁₀ =

To calculate the Rating Life L₁₀ of any pair of selected or trial bearings:

ratio

50

10/3

3/10

Life Expectancy (pair of bearings)

symbols for formulas: C = basic load rating, pounds (or newtons) C o = static load rating, pounds (or newtons) e = a reference value Fa = thrust load, pounds (or newtons) Fr = radial load, pounds (or newtons) L₁₀ = rating life, hours n = speed, revolutions per minute P = equivalent radial load, pounds (or newtons) T = externally applied thrust load, pounds (or newtons) TF = bearing thrust reaction, pounds (or newtons) X = radial factor Y = thrust factor Table 1 • Relation of L₁₀ life and speed to Bearing life, hours L₁₀

L₁₀ T n T 60 1,000,000

900

1000

1200

1500

1800

2400

3000

3600

6000

4.60 5.02 5.36 5.66 6.18 6.60 6.97 7.30 7.60 7.88 8.13 8.69 9.18 9.61 10.00 10.40 10.70 11.30 11.80 12.30 12.80 13.20 14.90 16.20

4.75 5.18 5.54 5.85 6.37 6.81 7.20 7.54 7.85 8.13 8.39 8.97 9.48 9.92 10.30 10.70 11.00 11.70 12.20 12.70 13.20 13.60 15.40 16.70

5.02 5.47 5.85 6.18 6.73 7.20 7.60 7.96 8.29 8.59 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.30 12.90 13.40 13.90 14.40 16.20 17.70

5.36 5.85 6.25 6.60 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.10 10.70 11.20 11.70 12.10 12.50 13.20 13.80 14.40 14.90 15.40 17.30 18.90

5.66 6.18 6.60 6.97 7.60 8.13 8.59 8.99 9.36 9.70 10.00 10.70 11.30 11.80 12.30 12.80 13.20 13.90 14.60 15.20 15.70 16.20 18.30 20.00

6.18 6.73 7.20 7.60 8.29 8.86 9.36 9.80 10.20 10.60 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.20 15.90 16.50 17.10 17.70 20.00 21.80

6.60 7.20 7.70 8.13 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.50 13.20 13.80 14.40 14.90 15.40 16.20 17.00 17.70 18.30 18.90 21.40 23.30

6.97 7.60 8.13 8.59 9.36 10.00 10.60 11.10 11.50 11.90 12.30 13.20 13.90 14.60 15.20 15.70 16.20 17.10 17.90 18.70 19.40 20.00 22.60 24.60

8.13 8.86 9.48 10.00 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.40 16.20 17.00 17.70 18.30 18.90 20.00 20.90 21.80 22.60 23.30 26.30 28.70

Step 3 Calculate the ratio of the resultant bearing thrust load Fa to the radial load F r for each bearing.

Step 4 Calculate the equivalent radial load P for both trial bearings. P = XFr + YFr If

is equal to or less than e, then X₁ = 1.0 Y₁ = 0 P = X1Fr + Y1Fa where

If

is greater than e, then P = X 2F r + Y 2F a.

For values of e, X2, and Y2 see the bearing rating table, page H-5. Step 5 Calculate each ratio of the bearing basic load rating C to its equivalent radial load. C P Step 6 Approximate life expectancy of each bearing from Table 1. ,

Life Adjustment The Rating Life, L₁₀, may be modified for some applica, tions in accordance with the formula L,n = a₁a₂a₃L₁₀ where

L n = Adjusted life for (100-n) % reliablility, a₁ = Life adjustment factor for reliability a₂ = Life adjustment factor for material and processing a₃ = Life adjustment factor for operating conditions. For most normal applications, all factors will be taken as 1, and the Rating Life used as the selection basis or life estimate. In addition, as long as standard catalog bearings are used, a₂ will be normally set equal to one. The factor a₃ covers such things as lubrication, misalignment, and temperature. Some conditions that could yield a₃ significantly different than unity include speeds less than 20000 DN or greater than 200000 DN, temperatures below –40°F (–40°C) or above 275°F (135°C). For other possible conditions, as well as additional information on life adjustment factors, consult LinkBelt Bearing Division, Rexnord Corp. H-4

Load Ratings

Series A20000S

Load ratings, weights and speed limits Bearing number


Weight

C Basic load rating

e

X₂

Y₂

7100

.51

.40

1.17

5700

.44

.40

1.37

4500

.40

.40

1.49

pounds

A22100S

0.2

.5

36

500

8210

33

300

7480

A22150S

0.3

.6

46

600

10500

37

800

8510

A22196S

0.5

1.1

73

800

16600

55

100

12400

A23225S

0.6

1.4

98

800

22200

68

500

15400

4000

.40

.40

1.49

A22262S

0.9

2.0

136

100

30600

93

200

21000

3500

.37

.40

1.61

A23275S

2.1

4.7

187

700

42200

150

300

33800

2850

.40

.40

1.49

A22300S

1.4

3.0

159

200

35800

108

500

24400

3100

.38

.40

1.59

A23300S A23334S

2.3 2.0

5.0 4.4

201

500

45300

132

600

29800

2650

.38

.40

1.57

A22413S

4.1

9.0

395

100

88800

244

700

55000

2100

.38

.40

1.60

newtons

pounds

Please consult for availability. V For oil lubrication only. For grease lubrication, use 75% of these values. Additional information, page H-15.

H-5


kilograms

newtons

pounds


A20000S Single Row Adjustable Self-aligning Deep Coined Retainer Double Contoured Roller Pocket

Dimensions (inches/mm) E

H Inner

J Outer

R* Inner

r* Outer

S₁

S₂

B Outside diameter V

A22100S

1.0000 25.400

2.3750 60.325

.781 19.84

1.37 34.8

2.00 50.8

.793 20.14

.491 12.47

.046 1.17

.046 1.17

.... ....

.1870 4.750

A22150S

1.5000 38.100

2.8345 71.996

.670 17.02

1.81 46.0

2.50 63.5

.650 16.51

.546 13.87

.062 1.57

.062 1.57

.... ....

.0150 0.381

A22196S

1.9680 49.987

3.5433 90.000

.787 19.99

2.38 60.4

3.18 80.8

.787 19.99

.651 16.54

.078 1.98

.078 1.98

.... ....

.0240 0.610

A23225S

2.2500 57.150

3.9370 100.000

.828 21.03

2.65 67.3

3.50 88.9

.860 21.84

.693 17.60

.093 2.36

.062 1.57

.... ....

.0000 0.000

A22262S

2.6250 66.675

4.4677 113.480

.948 24.08

3.06 77.7

4.07 103.4

1.000 25.40

.690 17.53

.140 3.56

.062 1.57

.... ....

.0900 2.286

A23275S

2.7553 69.985

5.9045 149.974

1.188 30.18

3.42 85.9

5.25 133.4

1.188 30.18

.960 24.38

.080 2.03

.080 2.03

.... ....

.0000 0.000

A22300S

3.0000 76.200

5.1172 129.977

1.062 26.97

3.40 86.4

4.57 116.1

1.062 26.97

.928 23.57

.078 1.98

.078 1.98

.... ....

.0000 0.000

3.0000 76.200 3.3457 84.981

5.9045 149.974

1.109 28.17

4.00 101.6

5.34 135.6

1.236 31.39 1.109 28.17

.925 23.50

.140 3.56 .125 3.18

.125 3.18

.0475 1.206

.... ....

4.1331 104.981

7.4792 189.972

1.419 36.04

4.50 114.3

6.63 168.4

1.419 36.04

1.265 32.13

.125 3.18

.125 3.18

.0680 1.727

....

A23300S A23334S A22413S

C

D

A Bore diameter †

Bearing number

Assembly width

Shoulder diameter

Ring width

Fillet radius

Apex distance

....

Bold face items normally available from stock; consult for availability of non-stock items. G Housing recess: Recommended ³⁄₁₆" (4.8 mm); minimum ¹⁄₁₆" (1.6 mm). * Largest fillet radius that will clear bearing corners. † Bore tolerance: 3.0000" (76.200 mm) diameter and smaller, +.0005" –.0000" (+0.013 –0.000 mm). Over 3.0000" (76.200 mm) diameter, +.0010" –.0000" (+0.025 –0.000 mm). V Outer ring O.D. tolerance: +.0010" –.0000" (+0.025 –0.000 mm). Selection guide, pages H-3, H-4. Load Ratings, page H-5. Additional information, page H-15.

H-6

Selection

Series A20000, A20000M In the A20000 series double row angular spherical roller bearings the outer rings are separable, and bearing clearance is adjustable by varying the axial position of one ring to the other. They are suitable for a wide variety of mounting arrangements. When mountings are designed for these bearings, provisions must be made to locate the two outer rings so that correct bearing clearance is attained.

In the A20000M series, the axial position is fixed by spacer rings sized to preadjusted bearing clearance ranges that correspond to ABMA recommended radial clearances for spherical roller bearings. When mounted, the outer rings must be held snugly against the spacer ring. The selection procedures and rating formulas shown here are in agreement with The American Bearing Manufactur-

Bearing Selection Step 1 Determine an appropriate L₁₀ design life. Operating time, Type of service hours per year Light seasonal usage Heavy seasonal usage Industrial—8 hour shift Industrial—16 hour shift Industrial—continuous Continuous—high reliability Step 2 Determine a required

500 to 750 1,400 to 1,600 2,000 4,000 8,700 —

Design life, years 3-5 4-6 10 10 10 —

L₁₀ design life, hours 3,000 8,000 20,000 40,000 80,000 to 100,000 120,000 to 300,000

from Table 1.

Step 3 Calculate the required C and select a spherical roller bearing. a For radial load only: P = Fr required C = P using from Step 2 Select a spherical roller bearing from pages H-9 and H-10 having a basic load rating C equal to or greater than the required C. b For combined radial and thrust loads: Select a trial roller bearing with appropriate characteristics and the desired shaft size, pages H-9 and H-10. Calculate the ratio of thrust load Fa to the radial load Fr.

Calculate the equivalent radial load P P = XFr + YFa if


If


For values of e, X1, Y1, X2, and Y2, consult the appropriate bearing rating table, pages H-9 and H-10. Calculate the required C required C =

P using

from Step 2.

Consult the bearing rating tables, pages H-9 and H-10, to see if the selected bearing meets or exceeds the required C. If a smaller bearing meets, or nearly meets, the required C, its life expectancy can be calculated.

H-7

ers Association Standards and ANSI/ ABMA STD 11-1990. Ratings are based on fatigue life. The L₁₀ Rating Life or fatigue life at 90% reliability is the usual basis for bearing selection. To assure a satisfactory bearing application, fitting practice, mounting, lubrication, sealing, static rating, housing strength, operating conditions and maintenance must be considered.

Selection

Series A20000, A20000M symbols for formulas: C Co e Fa Fr L₁₀ n P X Y

= = = = = = = = = =

basic formulas:


= L₁₀ u n u 60 1,000,000

10/3

Life Expectancy

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

or

ratio

Step1 a

Speed, n 50 1.93 2.11 2.25 2.38 2.59 2.77 2.93 3.07 3.19 3.31 3.42 3.65 3.86 4.04 4.20 4.36 4.50 4.75 4.97 5.18 5.36 5.54 6.25 6.81

100

200

300

400

500

600

700

800

2.38 2.93 3.31 3.61 2.59 3.19 3.61 3.93 2.77 3.42 3.86 4.20 2.93 3.61 4.07 4.44 3.19 3.93 4.44 4.84 3.42 4.20 4.75 5.18 3.61 4.44 5.02 5.47 3.78 4.65 5.25 5.73 3.93 4.84 5.47 5.96 4.07 5.02 5.66 6.18 4.20 5.18 5.85 6.37 4.50 5.54 6.25 6.81 4.75 5.85 6.60 7.20 4.97 6.12 6.92 7.54 5.18 6.37 7.20 7.85 5.36 6.60 7.46 8.13 5.54 6.81 7.70 8.39 5.85 7.20 8.13 8.86 6.12 7.54 8.51 9.28 6.37 7.85 8.86 9.66 6.60 8.13 9.18 10.00 6.81 8.39 9.48 10.30 7.70 9.48 10.70 11.70 8.39 10.30 11.70 12.70

3.86 4.20 4.50 4.75 5.18 5.54 5.85 6.12 6.37 6.60 6.81 7.29 7.70 8.06 8.39 8.69 8.97 9.48 9.92 10.30 10.70 11.00 12.50 13.60

4.07 4.44 4.75 5.02 5.47 5.85 6.18 6.47 6.73 6.97 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.00 10.50 10.90 11.30 11.70 13.20 14.40

4.27 4.65 4.97 5.25 5.73 6.12 6.47 6.77 7.05 7.30 7.54 8.06 8.51 8.92 9.28 9.61 9.92 10.50 11.00 11.40 11.80 12.20 13.80 15.00

4.44 4.84 5.18 5.47 5.96 6.37 6.73 7.05 7.34 7.60 7.85 8.39 8.86 9.28 9.66 10.00 10.30 10.90 11.40 11.90 12.30 12.70 14.40 15.70

Speed, n

3000 4000 5000 6000 8000 10000 12000 14000 16000 18000 20000 25000 30000 35000 40000 45000 50000 60000 70000 80000 90000 100000 150000 200000

u1,000,000 n u 60

L₁₀ =


3/10

900

1000

1200

1500

1800

2400

3000

3600

6000

4.60 5.02 5.36 5.66 6.18 6.60 6.97 7.30 7.60 7.88 8.13 8.69 9.18 9.61 10.00 10.40 10.70 11.30 11.80 12.30 12.80 13.20 14.90 16.20

4.75 5.18 5.54 5.85 6.37 6.81 7.20 7.54 7.85 8.13 8.39 8.97 9.48 9.92 10.30 10.70 11.00 11.70 12.20 12.70 13.20 13.60 15.40 16.70

5.02 5.47 5.85 6.18 6.73 7.20 7.60 7.96 8.29 8.59 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.30 12.90 13.40 13.90 14.40 16.20 17.70

5.36 5.85 6.25 6.60 7.20 7.70 8.13 8.51 8.86 9.18 9.48 10.10 10.70 11.20 11.70 12.10 12.50 13.20 13.80 14.40 14.90 15.40 17.30 18.90

5.66 6.18 6.60 6.97 7.60 8.13 8.59 8.99 9.36 9.70 10.00 10.70 11.30 11.80 12.30 12.80 13.20 13.90 14.60 15.20 15.70 16.20 18.30 20.00

6.18 6.73 7.20 7.60 8.29 8.86 9.36 9.80 10.20 10.60 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.20 15.90 16.50 17.10 17.70 20.00 21.80

6.60 7.20 7.70 8.13 8.86 9.48 10.00 10.50 10.90 11.30 11.70 12.50 13.20 13.80 14.40 14.90 15.40 16.20 17.00 17.70 18.30 18.90 21.40 23.30

6.97 7.60 8.13 8.59 9.36 10.00 10.60 11.10 11.50 11.90 12.30 13.20 13.90 14.60 15.20 15.70 16.20 17.10 17.90 18.70 19.40 20.00 22.60 24.60

8.13 8.86 9.48 10.00 10.90 11.70 12.30 12.90 13.40 13.90 14.40 15.40 16.20 17.00 17.70 18.30 18.90 20.00 20.90 21.80 22.60 23.30 26.30 28.70

b

To calculate the Rating Life L₁₀ of any selected trial bearing: Determine the equivalent radial load P. For radial load only: P = Fr For combined radial and thrust load: P = XFr + YF a If

is equal to or less than e, then P = X 1F r + Y 1Fa

If

is greater than e, then

P = X 2F r + Y 2Fa For values of e, X1, Y1, X2, and Y2, consult the appropriate bearing rating table, pages H-9 and H-10. Step2

Calculate the ratio of the bearing basic load rating C to its equivalent radial load. C P

Step3

Approximate the bearing life from Table 1.

Life Adjustment The Rating Life, L₁₀, may be modified for some applications in accordance with the formula , L n = a₁a₂a₃L₁₀ , where L n = Adjusted life for (100-n) % reliablility, a₁ = Life adjustment factor for reliability a₂ = Life adjustment factor for material and processing a₃ = Life adjustment factor for operating conditions. For most normal applications, all factors will be taken as 1, and the Rating Life used as the selection basis or life estimate. In addition, as long as standard catalog bearings are used, a₂ will be normally set equal to one. The factor a₃ covers such things as lubrication, misalignment, and temperature. Some conditions that could yield a₃ significantly different than unity include speeds less than 20000 DN or greater than 200000 DN, temperatures below –40°F (–40°C) or above 275°F (135°C). For other possible conditions, as well as additional information on life adjustment factors, consult Link-Belt Bearing Division, Rexnord Corp.

H-8

Load Ratings

Series A20000, A20000M

A20000

A20000M

Load ratings, weights and speed limits Bearing number


Weight kilograms

pounds

newtons A22100 A22100M A22112 A22112M A22118 A22118M A22125 A22125M

0.4 0.4 0.4 0.4 0.6 0.6 0.5 0.5

1.0 1.0 .9 .9 1.3 1.4 1.1 1.2

A22137 A22137M A22150 A22150M A22177 A22177M

0.6 0.6 0.5 0.6 0.9 0.9

1.3 1.4 1.2 1.3 2.0 2.0

A22196 A22196M A23196 A23196M

1.0 1.0 1.4 1.5

2.1 2.3 3.1 3.3

A24196 A24196M A23200 A23200M A23225 A23225M A24236 A24236M

2.0 2.1 1.4 1.5 1.3 1.3 1.8 2.0

4.3 4.7 3.2 3.3 2.8 2.9 3.9 4.3


H-9

C Basic load rating

pounds

newtons

pounds


e

l= e

Le

X₁

Y₁

X₂

Y₂

66

100

14900

51

200

11500

7100

.51

1.00

1.32

.67

1.96

80

500

18100

60

900

13700

6200

.48

1.00

1.40

.67

2.08

93

200

20900

64

900

14600

5700

.44

1.00

1.54

.67

2.29

127

700

28700

89

800

20200

4800

.45

1.00

1.51

.67

2.25

147

700

33200

94

300

21200

4500

.40

1.00

1.68

.67

2.50

189

000

42500

130

300

29300

4200

.45

1.00

1.50

.67

2.24

245

500

55200

164

600

37000

3850

.48

1.00

1.39

.67

2.07

197

500

44400

117

400

26400

4000

.40

1.00

1.68

.67

2.50

238

000

53500

139

700

31400

3600

.38

1.00

1.80

.67

2.68

Load ratings, weights and speed limits C₀ Static load rating

Weight Bearing number

kilograms

pounds

newtons A22262 A23262 A23262M

1.9 2.9 3.1

4.2 6.5 6.9

A23275 A23275M A22275 A22275M A22295 A22295M A23334 A23334M

4.2 4.4 3.0 3.1 2.7 2.8 4.0 4.3

9.3 9.8 6.6 6.8 6.0 6.2 8.9 9.4

A22343 A22343M A22351 A22351M A22362 A22362M A24374

4.3 4.4 4.9 5.1 4.7 4.9 7.5

9.4 9.8 10.9 11.3 10.4 10.8 16.0

A22354 A22354M A22400 A22400M A22413 A22413M A23472

9.6 10.0 8.6 8.8 8.4 8.7 13.6

21.1 22.1 18.9 19.3 18.6 19.1 30.0

C Basic load rating

pounds

newtons

pounds


l= e

e X₁

Y₁

Le X₂

Y₂

272

700

61300

159

700

35900

3500

.37

1.00

1.81

.67

2.70

249

400

67300

194

400

43700

3250

.42

1.00

1.62

.67

2.42

375

000

84300

257

500

57900

2850

.40

1.00

1.67

.67

2.49

318

000

71500

185

900

41800

3100

.38

1.00

1.79

.67

2.67

403

400

90700

226

800

51000

2650

.38

1.00

1.77

.67

2.64

516

000

116000

274

000

61600

2600

.43

1.00

1.57

.67

2.33

609

400

137000

351

800

79100

2200

.36

1.00

1.88

.67

2.79

790

200

178000

419

400

94300

2100

.38

1.00

1.80

.67

2.68

944

700

212000

520

400

117000

1800

.37

1.00

1.83

.67

2.72

V For oil lubrication only. For grease lubrication, use 75% of these values. Selection guide, pages H-7, H-8. Dimensions on pages H-11 – H-14. Additional information, page H-15.

H-10


A20000 Double Row Adjustable Self-aligning Deep Coined Retainer Double Contoured Roller Pocket

Dimensions (inches/mm) Bearing number A22100 A22112 A22118 A22125 A22137 A22150 A22177 A22196 A23196 A24196 A23200 A23225 A24236

A Bore diameter † 1.0000 25.400 1.1250 28.575 1.1875 30.162 1.2500 31.750

C Assembly width ‡

D

E

H Inner

Shoulder diameter

J Outer

R* Inner

Ring width

r* Outer Fillet radius

2.3750 60.235

1.188 30.18

1.31 33.3

2.00 50.8

1.188 30.18

.491 12.47

.046 1.17

.046 1.17

2.6250 66.675

1.312 33.32

1.50 38.1

2.31 58.7

1.312 33.32

.541 13.74

.046 1.17

.062 1.57

1.3775 34.988 1.5000 38.100 1.7712 44.988

2.8345 71.996

1.310 33.27

1.68 42.7

2.50 63.5

1.310 33.27

.546 13.87

.046 1.17

.062 1.57

3.3464 85.000

1.578 40.08

2.00 50.8

2.87 72.9

1.578 40.08

.651 16.54

.080 2.03

.062 1.57

1.9680 49.987 1.9680 49.987

3.5433 90.000 3.9370 100.000

1.526 38.76 1.656 42.06

2.25 57.2 2.25 57.2

3.18 80.8 3.50 88.9

1.526 38.76 1.656 42.06

.651 16.54 .624 15.85

.062 1.57 .093 2.36

.078 1.98 .062 1.57

1.9680 49.987 2.0000 50.800 2.2500 57.150 2.3616 59.985

4.3299 109.979

2.062 52.37

2.18 55.4

3.83 97.3

2.062 52.37

.836 21.23

.062 1.57

.080 2.03

3.9370 100.000

1.656 42.06

2.50 63.5

3.50 88.9

1.656 42.06

.693 17.60

.093 2.36

.062 1.57

4.3307 110.000

1.750 44.45

2.68 68.1

3.87 98.3

1.750 44.45

.763 19.38

.062 1.57

.078 1.98


H-11


Dimensions (inches/mm) Bearing number A22262 A23262 A23275 A22275 A22295 A23334 A22343 A22351 A22362 A24374 A22354 A22400 A22413 A23472

A Bore diameter †


C Assembly width ‡

D

E

H Inner

Shoulder diameter

J Outer

R( Inner

Ring width

r( Outer Fillet radius

2.6250 66.675 2.6250 66.675

4.4677 113.480 5.0000 127.000

1.716 43.59 2.188 55.58

3.00 76.2 2.90 73.7

4.07 103.4 4.44 112.8

1.716 43.59 2.188 55.58

.690 17.53 .936 23.77

.140 3.56 .078 1.98

.062 1.57 .078 1.98

2.7553 69.985 2.7500 69.850 2.9522 74.986 3.3457 84.981

5.9045 149.974

2.375 60.32

3.19 81.0

5.25 133.4

2.375 60.32

.960 24.38

.080 2.03

5.1172 129.977

2.125 53.98

3.31 84.1

4.57 116.1

2.150 54.61

.928 23.57

5.9045 149.974

2.313 58.75

3.75 95.2

5.34 135.6

2.313 58.75

.925 23.50

.080 2.03 .080 2.03 .140 3.56 .078 1.98

.125 3.18

6.0000 152.400

2.750 69.85

4.00 101.6

5.43 137.9

2.750 69.85

1.173 29.79

.078 1.98

.125 3.18

7.0866 180.000

2.677 68.00

4.19 106.4

6.38 162.0

2.677 68.00

1.152 29.26

.093 2.36

.125 3.18

7.4792 189.972

2.974 75.54

4.75 120.6

6.63 168.4

2.968 75.39

1.265 32.13

.125 3.18

.125 3.18

8.4634 214.970

3.437 87.30

5.37 136.4

7.50 190.5

3.437 87.30

1.511 38.38

.125 3.18

.125 3.18

3.4375 87.312 3.5100 89.154 3.6250 92.075 3.7402 95.001 3.5425 89.980 4.0000 101.600 4.1331 104.981 4.7236 119.979

.078 1.98

Bold face items normally available from stock; consult for availability of non-stock items. G Housing recess: Recommended ³⁄₁₆" (4.8 mm); minimum ¹⁄₁₆" (1.6 mm). ( Largest fillet radius that will clear bearing corners. V Outer ring O.D. tolerance: +.0010" –.0000" (+0.025 –0.000 mm). † Bore tolerance: 2.5000" (63.500 mm) diameter and smaller, +.0005" –.0000" (+0.013 –0.000 mm). Over 2.5000" (63.500 mm) diameter, +.0010" –.0000" (+0.025 –0.000 mm). ‡ Use shims, threaded cover, or spacer ring to provide for adjustment. Housing must allow clearance for this adjustment on dimension C: ±.035" (± 0.89 mm) for 3.437" (87.30 mm) assembly width, and ±.025" (± 0.64 mm) for all other widths. Selection guide, pages H-7, H-8. Load Ratings, pages H-9, H-10. Additional information, page H-15.

H-12


A20000M Double Row Factory Adjusted Self-aligning Deep Coined Retainer Double Contoured Roller Pocket

Dimensions (inches/mm) Bearing number g A22100M A22112M A22118M A22125M A22137M A22150M A22177M A22196M A23196M A24196M A23200M A23225M A24236M

A Bore diameter † 1.0000 25.400 1.1250 28.575 1.1875 30.162 1.2500 31.750

C Assembly width

D

E

H Inner

Shoulder diameter

J Outer

R( Inner

Ring width


2.3750 60.235

1.188 30.18

1.31 33.3

2.00 50.8

1.188 30.18

.491 12.47

.046 1.17

.046 1.17

2.6250 66.675

1.312 33.32

1.50 38.1

2.31 58.7

1.312 33.32

.541 13.74

.046 1.17

.062 1.57

1.3775 34.988 1.5000 38.100 1.7712 44.988

2.8345 71.996

1.310 33.27

1.68 42.7

2.50 63.5

1.310 33.27

.546 13.87

.046 1.17

.062 1.57

3.3464 85.000

1.578 40.08

2.00 50.8

2.87 72.9

1.578 40.08

.651 16.54

.080 2.03

.062 1.57

1.9680 49.987 1.9680 49.987

3.5433 90.000 3.9370 100.000

1.526 38.76 1.656 42.06

2.25 57.2 2.25 57.2

3.18 80.8 3.50 88.9

1.526 38.76 1.656 42.06

.651 16.54 .624 15.85

.062 1.57 .093 2.36

.078 1.98 .062 1.57

1.9680 49.987 2.0000 50.800 2.2500 57.150 2.3616 59.985

4.3299 109.979

2.062 52.37

2.18 55.4

3.83 97.3

2.062 52.37

.836 21.23

.062 1.57

.080 2.03

3.9370 100.000

1.656 42.06

2.50 63.5

3.50 88.9

1.656 42.06

.693 17.60

.093 2.36

.062 1.57

4.3307 110.000

1.750 44.45

2.68 68.1

3.87 98.3

1.750 44.45

.763 19.38

.062 1.57

.078 1.98


H-13


Dimensions (inches/mm) Bearing number

A Bore diameter †


A23262M

2.6250 66.675

5.0000 127.000

2.188 55.58

2.90 73.7

4.44 112.8

2.188 55.58

.936 23.77

.078 1.98

.078 1.98

A23275M

2.7553 69.985 2.7500 69.850 2.9522 74.986 3.3457 84.981

5.9045 149.974

2.375 60.32

3.19 81.0

5.25 133.4

2.375 60.32

.960 24.38

.080 2.03

5.1172 129.977

2.125 53.98

3.31 84.1

4.57 116.1

2.150 54.61

.928 23.57

5.9045 149.974

2.313 58.75

3.75 95.2

5.34 135.6

2.313 58.75

.925 23.50

.080 2.03 .080 2.03 .140 3.56 .078 1.98

.125 3.18

6.0000 512.400

2.750 69.85

4.00 101.6

5.43 137.9

2.750 69.85

1.173 29.79

.078 1.98

.125 3.18

7.4792 189.972

2.974 75.54

4.75 120.6

6.63 168.4

2.968 75.39

1.265 32.13

.125 3.18

.125 3.18

g

A22275M A22295M A23334M A22343M A22351M A22362M A22354M A22400M A22413M

3.4375 87.312 3.5100 89.154 3.6250 92.075 3.5425 89.980 4.0000 101.600 4.1331 104.981

C Assembly width

D

E

H Inner

Shoulder diameter

J Outer

R( Inner

Ring width


.078 1.98

Bold face items normally available from stock; consult for availability of non-stock items. G Housing recess: Recommended ³⁄₁₆" (4.8 mm); minimum ¹⁄₁₆" (1.6 mm). g Complete part number includes clearance symbol i.e. A22100M/CO. ( Largest fillet radius that will clear bearing corners. V Outer ring O.D. tolerance: +.0010" –.0000" (+0.025 –0.000 mm). † Bore tolerance: 2.5000" (63.500 mm) diameter and smaller, +.0005" –.0000" (+0.013 –0.000 mm). Over 2.5000" (63.500 mm) diameter, +.0010" –.0000" (+0.025 –0.000 mm). Selection guide, pages H-7, H-8. Load Ratings, pages H-9, H-10. Additional information, page H-15.

H-14


Series A20000S, A20000, A20000M Recommended Fitting Practice: Inner ring fitting practice Mounting method

Non-adjustable inner rings

Adjustable inner rings

Operation

Shaft finish

Service

Inner ring rotating with respect to load

Inner ring stationary with respect to load

Bearing Bore Over 3" thru 12" inclusive

Up to 3" inclusive Bearing bore, nominal

Fit

Shaft seat diameter, nominal

Bearing bore, nominal

Shaft seat diameter, nominal

Fit

Normal load (under 18% C), moderate shock,

Ground

+.0005 –.0000

.0005 tight .0015 tight

+.0015 +.0010

+.0010 –.0000


Heavy load, high speed, or shock

Unground or ground

+.0005 –.0000


+.0025 –.0015

+.0010 –.0000

+.0005 u Brg. .0005 u Brg. Bore (in.) Bore (in.) Tight +.001 Tol. Tol. ±.001 –.000

Normal load (under 18% C), no shock

Unground

+.0005 –.0000

.0005 loose .0005 tight

+.0005 –.0000

+.0010 –.0000


+.0010 –.0000

Normal to heavy load, or shock

Ground

+.0005 –.0000

.0010 loose .0000

+.0000 –.0005

+.0010 –.0000

.0020 loose .0000

+.0000 –.0000

Water spindle

Hardened ground

+.0005 –.0000

.0012 loose .0002 loose

–.0002 –.0007

+.0010 –.0000

.0022 loose .0002 loose

–.0002 –.0012

+.0025 +.0015

Outer ring fitting practice Mounting method

Operation

Adjustable outer rings or A20000M (clamped only)

Outer ring stationary with respect to load

Non-adjustable outer rings or A20000M (clamped only)

Normal load Outer ring (under 18% C), rotating no shock with respect Heavy load, to load or shock

Service

Up to 3" inclusive Bearing Housing outside seat Fit diameter, diameter, nominal nominal

Bearing outside diameter Over 3" to 5" inclusive Bearing Housing outside seat Fit diameter, diameter, nominal nominal

Over 5" thru 12" inclusive Bearing Housing outside seat Fit diameter, diameter, nominal nominal

Steady load, no shock

+.0010 .0020 loose –.0000 .0000

+.0010 +.0020

+.0010 –.0000

.0020 loose .0000

+.0010 +.0020

+.0010 –.0000

.0020 loose .0000

+.0010 +.0020

Heavy load, or shock

+.0010 .0010 loose –.0000 .0010 tight

+.0000 +.0010

+.0010 –.0000


+.0000 +.0010

+.0010 –.0000


+.0000 +.0020

+.0010 .0005 tight –.0000 .0025 tight

–.0015 –.0005

+.0010 –.0000


–.0020 –.0010

+.0010 –.0000


–.0020 –.0010

+.0010 .0020 tight –.0000 .0040 tight

–.0030 –.0020

+.0010 –.0000


–.0030 –.0020

+.0010 –.0000


–.0030 –.0020

Operation: Imposed radial loads should not exceed .25C. Where high radial loads, high speeds, thrust loads or vibratory loads are unavoidable, consult the Link-Belt Bearing Division.

Warning: The reliability built into all Link-Belt bearings can be realized in service only when they are correctly selected and properly installed, protected and maintained. The correct selection of bearings requires that the magnitude and nature of all loads, speeds, alignment, mount-

H-15

ing, operating requirements, and maintenance be adequately considered. The selection of materials for and design of housings, shafting, fasteners, seals, and accessories as well as provisions for installation and maintenance must follow good engineering principles. Housings and covers must be designed to safely handle the radial and axial loads involved. Adequate space must be provided in the housing and covers for a supply of lubricant. Seals must be provided that will satisfactorily cope with the environmental conditions.

Shaft O.D. size and housing bore size tables show recommended fitting practices, and should be followed strictly to assure a successful mounting arrangement. Service instructions are provided with shipments of bearings and are available on request. These instructions provide detailed information to aid in proper installation, operation, and maintenance, and should be carefully read and followed. Failure to do so may result in unsatisfactory service, as well as serious personal injury or property damage.

Nomenclature

Series A20000S, A20000, A20000M Spherical Roller Bearings Symbol

Description

A

Spherical roller bearing, separable outer ring(s)

22 23 24

Basic bearing series Larger O.D. or greater load rating than series 22 Larger O.D. or greater load rating than series 23

196 None M S C2 C0 C3 W22 C40 C50

A

22

196

M

C0 C40

Bore size in hundredths of an inch Double row roller bearing; separable outer rings Double row bearing; separable outer rings with spacer for preadjusted clearance Single row roller bearing; adjustable Internal clearance less than C0 Standard internal clearance Internal clearance greater than C0

(Series A20000M ONLY)

Reduced O.D. tolerance in center of tolerance range Reduced O.D. tolerance in high half of tolerance range Reduced O.D. tolerance in low half of tolerance range


H-16

Sleeve Bearing Units and Takeups Contents Series 1000, 1100, 2-1200, 2-1300, 2-1400, 2-1500, F2200, DSB2800 Rigid Sleeve Bearing Units and Takeups Introduction .................................... I-1 Pictorial Index ................................ I-3 Selection ........................................ I-5 Selection, Additional Information ................................. I-6 Load Ratings .................................. I-7 Dimensions .................................... I-9 Replacement Bearings ................ I-17 Nomenclature ............................... I-29

Series 3200 Flex-block® Sleeve Bearing Units Introduction .................................. I-19 Pictorial Index .............................. I-20 Selection ...................................... I-21 Selection, Additional Information ............................... I-22 Load Ratings ................................ I-23 Dimensions .................................. I-25 Nomenclature ............................... I-29

Series 1000, 1100, 2-1200, 2-1300, 2-1400, 2-1500, F2200, DSB2800 Rigid Sleeve Bearing Units and Takeups Rigid sleeve bearing units provide compact and reliable usage in applications where continuous operation and uninterrupted service are required. Because the bearing material wears gradually, sudden breakdowns and costly maintenance, are minimized. Sleeve bearings can also operate extremely quietly. The standard bearing materials of babbitt, bronze and cast iron will handle a wide variety of applications such as on log decks, sewage treatment equipment, furnaces and ovens, quiet operating fans and blowers, power plant dampers and strokers, oscillating shaft applications and other general conveying and power transmission machinery.

a Bearing of babbitt or bronze is securely anchored in housing. b Housing is drilled and tapped for grease cup or lubrication fitting; grooves distribute lubricant over loaded area. c Finished ends permit flush mounting of pulley, sprocket, or collar against bearing when required. d Two-piece pillow block has shims to provide for adjustment and compensate for wear. e Mounting surface is finished to provide firm seating on flat .

b a c

d

e

I-1

One-piece Pillow Blocks One-piece pillow blocks are recommended for general applications where it is unnecessary to remove a bearing cap. They are available with babbitt, bronze or plain bore cast iron bearings.

Two-piece Pillow Blocks Two-piece pillow blocks are used whenever a bearing with a removable cap is required. They are available with babbitt or bronze bearings. For heavy side pressures or angular loading, housings with gibbed ts provide greater strength. Cast steel housings are used where sudden shocks or heavy impact loads are encountered.

Flanged Units Flanged units with square flanges have slotted mounting holes to make them interchangeable with most common ball and roller bearing bolting patterns. These units have either babbitt or bronze bearings.

Sleeve Bearing Materials Babbitt Babbitt bearings are used for moderate speeds and loads and ambient temperatures up to 130°F (54°C). Babbitt has the ability to give excellent service with a minimum of maintenance. Bronze Bronze bearings are recommended for heavier loads, impact, and temperatures beyond the limits of babbitt bearings. They can be operated

at ambient temperatures up to 300°F (149 °C) providing satisfactory lubrication is available. Bronze has excellent all-around bearing characteristics; it has a relatively low coefficient of friction and a remarkable resistance to shock and wear.

I-2

Rigid Sleeve Bearing Units

Series 1000, 1100, 2-1200, 2-1300, 2-1400, 2-1500, F2200, DSB2800 Pillow Blocks, Cast Iron, One-piece Housing 1000, 1000Z, 1100 Series 1000 babbitt bearing and 1000Z bronze bearing pillow blocks have 2 or 4-bolt base for shaft sizes ¹⁄₂" through 3¹⁵⁄₁₆". Series 1100 has a plain cast iron bore and 2 or 4-bolt base for shaft sizes ¹⁄₂" through 3¹⁵⁄₁₆". Selection on pages I-5 and I-6. Load ratings on pages I-7 and I-8. Dimensions on pages I-9 and I-10.

BABBIT OR BRONZE BEARING

PLAIN IRON BEARING

Pillow Blocks, Cast Iron, Two-piece Housing 2-1200, 2-1200Z, 2-1300 Series 2-1200 babbitt bearing and 2-1200Z bronze bearing pillow blocks have 2-bolt base for shaft sizes ⁷⁄₈" through 3¹⁵⁄₁₆". Series 2-1300 babbitt bearing pillow blocks have 4-bolt base for shaft sizes 3⁷⁄₁₆" through 4⁷⁄₁₆". Selection on pages I-5 and I-6. Load ratings on pages I-7 and I-8. Dimensions on pages I-11 and I-12. 2-BOLT BASE

4-BOLT BASE

Pillow Blocks, Cast Iron or Cast Steel, Gibbed t Two-piece Housing 2-1400, 2-1400Z, 2K1400Z Series 2-1400 babbitt bearing pillow blocks have 4-bolt base for shaft sizes 1¹⁵⁄₁₆" through 10". Series 2-1400Z bronze bearing pillow blocks have 4-bolt base for shaft sizes 1¹⁵⁄₁₆" through 8", also available with cast steel housings for shaft sizes 1¹⁵⁄₁₆" through 12". Selection on pages I-5 and I-6. Load ratings on pages I-7 and I-8. Dimensions on page I-13.

I-3

4-BOLT BASE

Pillow Blocks, Cast Iron or Cast Steel, Two-piece Housing, Angular t 2-1500, 2-1500Z Series 2-1500 babbitt bearing pillow blocks have 4-bolt base for shaft sizes 1¹⁵⁄₁₆" through 9". Series 2-1500Z bronze bearing pillow blocks have 4-bolt base for shaft sizes 1¹⁵⁄₁₆" through 8". Selection on pages I-5 and I-6. Load ratings on pages I-7 and I-8. Dimensions on page I-14.

4-BOLT BASE

Flanged Units, Cast Iron, One-piece Housing F2200, F2200Z Series F2200 babbitt bearing and F2200Z bronze bearing flanged units have 4-bolt square flanges for shaft sizes ³⁄₄" through 3¹⁵⁄₁₆". Selection on pages I-5 and I-6. Load ratings on pages I-7 and I-8. Dimensions on page I-15.

Takeups, Steel Frames Adjustable type takeups for conveyors and elevators. Welded or formed steel frames. LC Universal Takeup Frames only. Adjustable takeups for use with ball, roller, rigid sleeve and Flex-block® pillow blocks. DSB 2800 Conveyor takeup with welded steel frame and hinged top for moderate to heavy service. Bearing bore parallel to base of frame. Shaft sizes 1¹⁵⁄₁₆" through 3¹⁵⁄₁₆". Babbitt bearings. Selection on pages I-5 and I-6. Load ratings on pages I-7 and I-8. Dimensions on pages I-16 and I-28.

I-4

Selection

Rigid Sleeve Bearing Units To select a rigid sleeve bearing, determine the applied radial load and the applicable operating conditions. The procedure shown here will aid in selecting an appropriate bearing. The selection procedures and rating formulas used here are in agreement with industry standards for sleeve bearings established by the Mechanical Power Transmission Association. The bearing ratings apply when certain installation and operating conditions are met and when any other adverse ambient conditions such as high or low temperatures, extreme dirt or moisture, chemical contamination, shock or vibration loading direct or induced, oscillating shafts, intermittent operation and related factors are carefully considered.

Sleeve Bearing Selection Step 1 From Table 1, select the bearing material and housing series and material suitable for the radial load direction. Step 2 Refer to the radial load rating tables on pages I-7 and I-8 to determine the shaft diameter necessary to obtain the required radial rating at the given speed.

The ratings used apply when the following conditions are met: 1. Align bearings with the shaft to provide uniform load distribution. 2. Normal running loads should not exceed the ratings shown in the tables. Starting and occasional peak loads should not exceed these ratings by more than 100%. 3. The direction of the load should not be within 30° (.53 radians) of either side of the grease groove and must further meet any load direction limitations imposed by Table 1. 4. The shaft finish through the bearing bore should be at least as smooth as that of normal commercial cold

Table 1 • Bearing material and unit type selection Material Bearing

Housing

Cast iron one-piece

Recommended loading range, degrees, radius for pillow block or flanged unit G

300° 5.2 rad

Available shaft sizes, inches

¹⁄₂-2¹⁵⁄₁₆

Rigid unit series Pillow block 2-bolt

120° 2.1 rad Babbitt

Cast iron two-piece

F2200

⁷⁄₈-3¹⁵⁄₁₆

Cast iron two-piece

Cast steel two-piece

2-1200

300° 5.2 rad

1¹⁵⁄₁₆-12

2-1400

l 120° 2.1 rad

1¹⁵⁄₁₆-9

2-1500

120° 2.1 rad Bronze

1000F

2-1300

300° 5.2 rad

Square

1000

3⁷⁄₁₆-4¹⁵⁄₁₆

¹⁄₂-2¹⁵⁄₁₆ Cast iron one-piece

Flanged Unit

4-bolt

³⁄₄-3¹⁵⁄₁₆ 3⁷⁄₁₆-3¹⁵⁄₁₆

If the conditions described above cannot be met, the load should be increased by a service factor prior to selecting the bearing sizes from the tables shown on pages I-7 and I-8. The service factor may be as high as 2.0 for conditions to the left of the “stair-step” line, or as high as 3.0 for conditions to the right of the line. Consult Link-Belt Bearing Division, Rexnord Corp. Step 3 To position a shaft axially or where light thrust loads are present provide thick bronze washers backed by a shaft collar or a machined shaft shoulder against the end of the bearing. The bearing ends are already machined.

finished steel shafting (about 32 micro-inches or .82µm). There should also be no machined or ground spiral lead on the shaft journal. Shafting should be within the diameter tolerances listed on page I-6. 5. Ambient temperatures should not exceed 130°F (54°C) for babbitt and 300°F (149°C) for bronze bearings. This temperature limit applies to shafts extending from ovens, high temperature fans, etc. 6. Sturdy, vibration-free ing structures must be provided, along with adequate grease lubrication.

1000Z

³⁄₄-3¹⁵⁄₁₆

F2200Z

3⁷⁄₁₆-3¹⁵⁄₁₆ ⁷⁄₈-3¹⁵⁄₁₆

1000FZ 2-1200Z

300° 5.2 rad

3⁷⁄₁₆-8

2-1400Z

l 120° 2.1 rad

1¹⁵⁄₁₆-8

2-1500Z

300° 5.2 rad

1¹⁵⁄₁₆-12

2K1400Z

G Shaded portion of drawings represents recommended loading range with the grease groove horizontal and opposite the loaded area. For other positioning, consult Link-Belt Bearing Division, Rexnord Corp. l 300°(5.2 rad.) for housings with gibbed t construction.

I-5

Selection, Additional Information

Rigid Sleeve Bearing Units Sleeve Bearing Materials: Plain bearings made of babbitt are universally accepted as providing reasonable capacity and dependable service, often under adverse conditions. Babbitt is a relatively soft bearing material and for this reason minimizes danger of scoring or damage to shafts or rotors. It can often be repaired quickly on the spot by rescraping, pouring of new metal, etc. Bearing operating temperature should not exceed 130°F (54°C) although occasional peaks to 200°F (93°C) may be tolerated. Babbitt bearings are usually restricted to applications involving light to moderate loads and mild shock. Bronze bearings are suitable for heavier loads than babbitt (75% to 200% higher), depending upon specific conditions of load and speed. Bronze withstands higher shock loads and permits somewhat higher speed operation. It is usually restricted to 300°F (150°C) ambient temperature, although normal multi-purpose greases are limited to 200°-250°F (93°-121°C) operating temperature. Bronze is a harder material than babbitt and has a greater tendency to score or damage shafts in the event of malfunction such as lack of relubrication. Field repair of bronze bearings generally requires removing shims and scraping or replacement of bushings. Cast iron bearings (series 1100) are low in cost and suitable for many slow-

moving shafts and oscillating or reciprocating arms ing relatively light loads. The lubricating characteristics of cast iron are attributed to the free graphite flakes present in the material. With the use of cast iron bearings, higher shaft clearance is usually utilized. Thus any large wear particles or debris will not or seize the bearing. This material has been used to temperatures as high as 1000°F (538°C) under light loads and slow speed intermittent operations, where ordinary lubricants are ineffective.

Additional Features: By the very nature of their design, all rigid sleeve bearing units are expansion type, in that the shaft journal is free to slide axially through the bore of the bearing. To fix a unit, a combination of shaft shoulders and/or thrust collars with bronze washers can be utilized. Rigid sleeve bearing units have cored mounting bolt holes suitable for the inch or metric bolts listed. Bearings can be replaced in units with bronze sleeves. Care should be taken when replacing bronze sleeves, split or solid, to firmly anchor the sleeve to the housing.

Operation: Rigid sleeve bearing units are not prelubricated. The service instructions

Shaft Tolerances: Shaft diameters for rigid sleeve bearing units are usually held to the following regular commercial tolerances: Shaft Diameters 2¹⁄₁₆" through 2" 2¹⁄₁₆" through 4" 4¹⁄₁₆" through 6" 6¹⁄₁₆" through 13"

Recommended Tolerance Nominal to –.003" Nominal to –.004" Nominal to –.005" Nominal to –.006"

packed with shipments provide guidelines for initial lubrication and relubrication intervals. As lack of lubrication results in bearing and shaft wear, care must be taken to assure an adequate supply of correct lubricant, especially during initial startup and until satisfactory relubrication intervals are determined. Very careful shaft alignment is necessary during installation. Shaft journals must turn freely without binding in the bearing or excessive heat and seizure can result. Any factor which may disrupt or remove the lubricant film should be eliminated as well. Sharp edges on the shaft or the bearing surface can act as scrapers to destroy lubricant films. Do not extend shaft keyways into bearing bores. When rigid sleeve bearings must carry light to medium thrust loads, thrust washers of bronze should be placed against the already machined face of the bearing and backed by substantial thrust collars, shaft shoulders, machined gear, sprocket or sheave faces, etc.

Takeups: Rigid sleeve bearing pillow blocks can be mounted on the universal takeup frame LC, illustrated on page I-28 and LHD universal takeup frame, illustrated on pages D-22 or E-25. Takeups DSB2800 are on page I-16. Alignment of rigid sleeve bearing takeups is difficult and must be carefully accomplished. Alignment must also be maintained during any further adjustment of the takeup after operation. Bolt takeup frames firmly to good ing structure to prevent frame overload and distortion.

Warning: The reliability built in all Link-Belt bearings can be realized in service only when bearings are correctly selected, properly installed, protected and maintained. The correct selection of rigid sleeve bearing mounted units requires that the magnitude and nature of all loads, speeds, alignment, mounting, operating requirements and maintenance be adequately considered. The selection of materials for and design of housings, shafting, fasteners, and accessories as well as provisions for installation and maintenance must follow good engi-

neering principles. Housings must be selected and installed with regard to the degree and direction of the forces that will occur. Housings should not be used under tension loads except with adequate safety factors. For this reason pillow blocks are best suited to withstand radial loads ing through the base. When heavy loads or shock loads are possible, it is most important to mount a unit so that the line of force es directly into the base, or so that the unit is directly and substantially ed other than through its mounting bolts.

Where the line of force falls outside the base, serious housing and fastener deflection or failure may occur. Takeups are best located where loads are moderate and no shock loads are present. As many mounting arrangements are possible with takeups, proper safety factors must always be considered on all items of the system, including shafts, housings, fasteners, and adjusting screws. Link-Belt Bearing Division, Rexnord Corp., should be consulted where unusual loading conditions exist. I-6

Load Ratings

Babbitt Rigid Sleeve Bearing Units Radial load ratings for 10 to 300 RPM (pounds/newtons) LG Shaft diameter, inches

Shaft speed, RPM 10

50

100

150

200

250

300

¹⁄₂ ⁵⁄₈ ³⁄₄ ⁷⁄₈ ¹⁵⁄₁₆

100 150 180 260 280

445 667 801 1 157 1 246

100 150 175 255 275

445 667 778 1 134 1 223

100 145 175 250 265

445 645 778 1 112 1 179

95 145 170 245 260

423 645 756 1 090 1 157

95 140 170 240 255

423 623 756 1 068 1 134

95 140 165 235 250

423 673 734 1 045 1 112

95 135 160 230 245

423 600 712 1 023 1 090

1 1¹⁄₈ 1³⁄₁₆, 1¹⁄₄ 1⁵⁄₁₆, 1³⁄₈ 1⁷⁄₁₆, 1¹⁄₂ 1¹¹⁄₁₆, 1³⁄₄

295 415 440 585 640 875

1 1 1 2 2 3

312 846 957 602 847 892

290 410 430 570 625 850

1 1 1 2 2 3

290 824 913 535 780 781

285 400 420 555 605 820

1 1 1 2 2 3

268 779 868 469 691 648

280 390 410 535 585 785

1 1 1 2 2 3

246 735 824 380 602 492

270 380 395 520 565 755

1 1 1 2 2 3

201 690 757 313 513 358

265 370 385 505 545 720

1 1 1 2 2 3

179 646 713 246 424 203

260 355 375 485 525 690

1 1 1 2 2 3

157 579 668 157 335 069

1¹⁵⁄₁₆, 2 2³⁄₁₆, 2¹⁄₄ 2⁷⁄₁₆, 2¹⁄₂ 2¹¹⁄₁₆, 2³⁄₄ 2¹⁵⁄₁₆, 3 3⁷⁄₁₆, 3¹⁄₂

1150 1460 1800 2190 2600 3550

5 6 8 9 11 15

120 490 010 740 570 790

1110 1400 1730 2080 2470 3330

4 6 7 9 10 14

940 230 690 250 990 810

1060 1330 1630 1950 2300 3060

4 5 7 8 10 13

720 920 250 670 230 610

1010 1260 1530 1820 2130 2790

4 5 6 8 9 12

490 600 810 100 470 410

965 1190 1430 1690 1960 2520

4 5 6 7 8 11

292 290 360 520 720 210

915 1120 1340 1560 1790 1200

4 4 5 6 7 5

070 980 960 940 960 340

865 1050 1240 1150 675

3 4 5 5 3

848 670 520 120 002

3¹⁵⁄₁₆, 4 4⁷⁄₁₆, 4¹⁄₂ 4¹⁵⁄₁₆, 5 5⁷⁄₁₆, 5¹⁄₂ 5¹⁵⁄₁₆, 6 6⁷⁄₁₆, 6¹⁄₂

4640 5870 7240 8750 10410 12200

20 26 32 38 46 54

640 110 210 920 310 270

4310 5410 6600 7900 9300 10790

19 24 29 35 41 48

170 060 360 140 370 000

3910 4830 5810 6840 7910 9020

17 21 25 30 35 40

390 480 840 430 190 120

3500 4250 5010 4360 2390

15 18 22 19 10

570 900 290 390 630

2760 1410

12 280 6 270

6¹⁵⁄₁₆, 7 7⁷⁄₁₆, 7¹⁄₂ 7¹⁵⁄₁₆, 8 9 10 12

14120 17270 18390 20750 22950 30700

62 76 81 92 102 136

810 820 800 300 090 560

12360 14950 15750 17360 18760 23910

54 66 70 77 83 106

980 500 060 220 450 360

10150 12050 10710 4140

45 53 47 18

150 600 640 420

For speeds lower than 10 RPM consult Link-Belt Bearing Division.

Radial load ratings for 350 to 1000 RPM (pounds/newtons) G Shaft diameter, inches

Shaft speed, RPM 350

400

450

500

600

700

800

¹⁄₂ ⁵⁄₈ ³⁄₄ ⁷⁄₈ ¹⁵⁄₁₆

95 135 160 225 240

423 600 712 1001 1068

90 135 155 220 235

400 600 689 979 1045

90 130 155 215 225

400 587 689 956 1001

90 130 150 210 220

400 587 667 934 979

85 125 145 200 210

378 556 645 890 934

85 120 140 190 200

378 534 623 845 890

1 1¹⁄₈ 1³⁄₁₆, 1¹⁄₄ 1⁵⁄₁₆, 1³⁄₈ 1⁷⁄₁₆, 1¹⁄₂ 1¹¹⁄₁₆, 1³⁄₄

250 345 360 470 500 655

1112 1535 1601 2091 2224 2914

245 335 350 455 480 625

1090 1490 1557 2024 2135 2780

240 325 340 435 460 590

1068 1446 1512 1935 2046 2624

230 315 325 420 440 340

1023 1401 1446 1868 1957 1512

220 295 305 345 205

979 1312 1357 1535 912

205 245 190

912 1090 845

1¹⁵⁄₁₆, 2 2³⁄₁₆, 2¹⁄₄ 2⁷⁄₁₆, 2¹⁄₂

815 975 645

3625 4337 2869

730 410

3247 1824

335

1490

85 115 130 180 185

900 378 512 578 801 823

L Load ratings are based on industry standards established by the Mechanical Power Transmission Association. G For plain bore Cast Iron Sleeve Bearing Units use radial load ratings at speeds to the left of the shaded area.

I-7

80 110 125 150 105

1000 356 489 556 667 467

80 110 120

356 489 534

Load Ratings

Bronze Rigid Sleeve Bearing Units Radial load ratings for 10 to 300 RPM (pounds/newtons) L Shaft diameter, inches

Shaft speed, RPM 10

¹⁄₂ ⁵⁄₈ ³⁄₄ ⁷⁄₈ ¹⁵⁄₁₆

50

100

150

200

250

300

200 250 300 435 465

1 1 1 2

890 112 334 935 068

200 250 300 430 460

1 1 1 2

890 112 334 913 046

200 245 295 425 455

1 1 1 2

890 090 312 890 024

195 245 295 420 450

1 1 1 2

867 090 312 868 002

195 240 290 415 445

1 1 1 1

867 090 290 846 979

195 240 285 410 435

1 1 1 1

867 068 268 824 935

195 240 285 405 430

1 1 1 1

867 068 268 802 913

1 1¹⁄₈ 1³⁄₁₆, 1¹⁄₄ 1⁵⁄₁₆, 1³⁄₈ 1⁷⁄₁₆, 1¹⁄₂ 1¹¹⁄₁₆, 1³⁄₄

495 700 735 980 1070 1470

2 3 3 4 4 6

202 114 269 359 760 540

490 690 730 965 1050 1440

2 3 3 4 4 6

180 069 247 293 670 410

485 680 715 950 1030 1410

2 3 3 4 4 6

157 025 180 226 580 270

480 670 705 930 1010 1370

2 2 3 4 4 6

135 980 136 137 490 090

470 660 695 915 995 1340

2 2 3 4 4 5

091 936 092 070 426 960

465 650 680 895 975 1310

2 2 3 3 4 5

068 891 025 981 337 830

460 640 670 880 955 1280

2 2 2 3 4 5

046 847 980 914 248 690

1¹⁵⁄₁₆, 2 2³⁄₁₆, 2¹⁄₄ 2⁷⁄₁₆, 2¹⁄₂ 2¹¹⁄₁₆, 2³⁄₄ 2¹⁵⁄₁₆, 3 3⁷⁄₁₆, 3¹⁄₂

1920 2440 3020 3660 4370 5960

8 10 13 16 19 26

540 850 430 280 440 510

1880 2390 2940 3560 4230 5740

8 10 13 15 18 25

360 630 080 840 820 530

1830 2320 2850 3430 4060 5470

8 10 12 15 18 24

140 320 680 260 060 330

1790 7 2240 9 2750 12 3300 14 3890 17 5200 23

960 960 230 680 300 130

1740 7 2170 9 2650 11 3170 14 3720 16 4930 21

740 650 790 100 550 930

1690 2100 2560 3040 3550 3610

7 9 11 13 15 16

520 340 390 520 790 060

1640 2030 2460 2620 2440 1440

7 9 10 11 10 6

300 030 940 650 850 410

3¹⁵⁄₁₆, 4 4⁷⁄₁₆, 4¹⁄₂ 4¹⁵⁄₁₆, 5 5⁷⁄₁₆, 5¹⁄₂ 5¹⁵⁄₁₆, 6 6⁷⁄₁₆, 6¹⁄₂

7790 9860 12180 14740 17530 20560

34 43 54 65 77 91

650 860 180 570 980 460

7460 9400 11540 13880 16420 19150

33 41 51 61 73 85

180 810 330 740 040 180

7060 8820 10740 12820 15040 17390

31 39 47 57 66 77

400 230 770 030 900 350

580 650 260 990 350 140

5910 26 290 5400 24 020 4090 18 190 1820 8 100

6¹⁵⁄₁₆, 7 7⁷⁄₁₆, 7¹⁄₂ 7¹⁵⁄₁₆, 8 9 10 12

23840 29170 31090 35150 38950 52300

106 129 138 156 172 232

050 750 300 360 260 640

22070 26850 28450 31760 34760 45520

98 119 126 141 154 202

170 430 550 280 620 480

19870 88 390 23950 106 530 23410 104 130 18540 82 470 12220 54 360

6650 8240 9950 10340 9520 7900

29 36 44 45 42 35

5350 23 800 1880 8 360

For speeds lower than 10 RPM consult Link-Belt Bearing Division, Rexnord Corp.

Radial load ratings for 350 to 1000 RPM (pounds/newtons) Shaft diameter, inches ¹⁄₂ ⁵⁄₈ ³⁄₄ ⁷⁄₈ ¹⁵⁄₁₆

Shaft speed, RPM 350

400

450

500

600

700

800

900

1000

195 235 280 400 425

867 1045 1246 1779 1890

190 235 280 395 420

845 1045 1246 1757 1868

190 235 275 390 415

845 1045 1223 1735 1846

190 230 270 385 410

845 1023 1201 1713 1824

185 225 265 375 395

823 1001 1179 1668 1757

185 220 260 365 385

823 979 1157 1624 1713

185 220 255 355 375

823 979 1134 1579 1668

180 215 250 325 295

800 956 1112 1446 1312

180 210 240 245 200

800 934 1068 1090 890

1 1¹⁄₈ 1³⁄₁₆, 1¹⁄₄ 1⁵⁄₁₆, 1³⁄₈ 1⁷⁄₁₆, 1¹⁄₂ 1¹¹⁄₁₆, 1³⁄₄

450 630 660 865 935 1240

2002 2802 2936 3848 4159 5520

445 620 645 845 915 1210

1979 2758 2869 3759 4070 5380

440 605 635 830 895 1180

1957 2691 2825 3692 3981 5250

430 595 625 815 875 930

1913 2647 2780 3625 3892 4137

420 575 600 735 635 410

1868 2558 2669 3269 2825 1824

405 525 485 465 315

1802 2335 2157 2068 1401

360 360 300 195

1601 1601 1334 867

255 195 115

1134 867 512

150

667

1¹⁵⁄₁₆, 2 2³⁄₁₆, 2¹⁄₄ 2⁷⁄₁₆, 2¹⁄₂ 2¹¹⁄₁₆, 2³⁄₄

1590 1960 1860 1580

7070 8720 8270 7030

1500 1390 1090 545

6670 6180 4850 2424

1110 830

4940 3692

715

3180

L Load ratings are based on industry standards established by the Mechanical Power Transmission Association.

I-8

Rigid Sleeve Bearing Pillow Blocks

1000, 1000Z Cast Iron Housing One-piece Design 2-bolt Base, 4-bolt Base Babbitt or Bronze Bearing Relubricatable

Dimensions (inches/mm) Style of base

Shaft diameter

4-BOLT

2-BOLT

inches

Pillow block number Series 1000 Series 1000Z babbitt bronze

A

B

C

D

E

F Bolts

G

L

M

S

T Unit wt. L (lbs.)

¹⁄₂

1008

1008Z

³⁄₄ 19.05

2³⁄₈ 60.3

3¹⁄₄ 82.6

1³⁄₈ 34.9

1 25.4

⁵⁄₁₆ 8

.... ....

³⁄₈ 9.5

1¹⁄₂ 38.1

1³⁄₁₆ 30.2

¹⁄₂ 12.7

¹⁄₈

.8

⁵⁄₈ ³⁄₄

1010 1012

1010Z 1012Z

⁷⁄₈ 22.22

3 76.2

4¹⁄₄ 108.0

2 50.8

1³⁄₈ 34.9

³⁄₈ 10

.... ....

¹⁄₂ 12.7

1³⁄₄ 44.4

1¹⁄₂ 38.1

⁵⁄₈ 15.9

¹⁄₈

1.6 1.5

⁷⁄₈ ¹⁵⁄₁₆ 1

1014 1015 1016

1014Z 1015Z 1016Z

1 25.40

3¹⁄₄ 82.6

4¹⁄₂ 114.3

2 50.8

1³⁄₈ 34.9

³⁄₈ 10

¹⁄₂ 12.7

1³¹⁄₃₂ 50.0

1³⁄₄ 44.4

⁵⁄₈ 15.9

¹⁄₈

1.9 1.7 1.6

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

1018 1019 1020

1018Z 1019Z 1020Z

1¹⁄₄ 31.75

4 101.6

5¹⁄₄ 133.4

2¹⁄₂ 63.5

1⁵⁄₈ 41.3

³⁄₈ 10

.... ....

⁵⁄₈ 15.9

2³⁄₈ 60.3

2 50.8

⁵⁄₈ 15.9

¹⁄₈

2.6 2.5 2.4

1³⁄₈ 1⁷⁄₁₆ 1¹⁄₂

1022 1023 1024

1022Z 1023Z 1024Z

1³⁄₈ 34.92

5 127.0

6³⁄₄ 171.4

3 76.2

2 50.8

¹⁄₂ 12

.... ....

³⁄₄ 19.0

2¹¹⁄₁₆ 68.3

2³⁄₈ 60.3

¹³⁄₁₆ 20.6

¹⁄₄

4.5 4.3 4.1

1¹¹⁄₁₆ 1³⁄₄

1027 1028

1027Z 1028Z

1⁵⁄₈ 41.28

5¹⁄₂ 139.7

7¹⁄₄ 184.2

3¹⁄₂ 88.9

2¹⁄₄ 57.2

¹⁄₂ 12

.... ....

³⁄₄ 19.0

3³⁄₁₆ 81.0

2³⁄₄ 69.8

⁷⁄₈ 22.2

¹⁄₄

6.0 5.7

1¹⁵⁄₁₆ 2

1031 1032

1031Z 1032Z

1³⁄₄ 44.45

6 152.4

8 203.2

4 101.6

2³⁄₄ 69.8

⁵⁄₈ 16

.... ....

⁷⁄₈ 22.2

3¹⁄₂ 88.9

3¹⁄₈ 79.4

1 25.4

¹⁄₄

8.5 8.3

2³⁄₁₆

1035

1035Z

2 50.80

6¹⁄₂ 165.1

8¹⁄₂ 215.9

4¹⁄₂ 114.3

3 76.2

⁵⁄₈ 16

.... ....

1 25.4

3⁷⁄₈ 98.4

3³⁄₈ 85.7

1 25.4

³⁄₈

11.0

2⁷⁄₁₆

1039

1039Z

2¹⁄₄ 57.15

7 177.8

9¹⁄₄ 235.0

5 127.0

3¹⁄₄ 82.6

³⁄₄ 20

.... ....

1¹⁄₈ 28.6

4³⁄₈ 111.1

3³⁄₄ 95.2

1¹⁄₈ 28.6

³⁄₈

15.0

2¹⁵⁄₁₆

1047

1047Z

2¹⁄₂ 63.50

8¹⁄₂ 215.9

11¹⁄₄ 285.8

6 152.4

4 101.6

⁷⁄₈ 24

.... ....

1¹⁄₄ 31.8

5 127.0

4¹⁄₂ 114.3

1³⁄₈ 34.9

³⁄₈

26.0 25.0

3⁷⁄₁₆

1055F

1055FZ

3 76.20

10 254.0

12¹⁄₂ 317.5

7 177.8

5 127.0

³⁄₄ 20

2³⁄₄ 69.8

1³⁄₈ 34.9

6 152.4

5¹⁄₄ 133.4

1¹⁄₄ 31.8

¹⁄₂

39

3¹⁵⁄₁₆

1063F

1063FZ

3¹⁄₄ 82.55

11 279.4

13³⁄₄ 349.2

8 203.2

5¹⁄₂ 139.7

³⁄₄ 20

3 76.2

1¹⁄₂ 38.1

6⁹⁄₁₆ 166.7

5⁷⁄₈ 149.2

1³⁄₈ 34.9

¹⁄₂

54

.... ....

Bold face items are normally available from stock; please consult for availability of non-stock items. L One pipe tapped hole for lubrication. Grease cup or fitting not included. Note: Approximate load ratings from babbitt ratings, page I-7. Selection guide, pages I-5, I-6. Additional information, page I-6.

I-9

H

Rigid Bearing Pillow Blocks

1100 Cast Iron Housing One-piece Design 2-bolt Base, 4-bolt Base Cast Iron Bearing Relubricatable

Dimensions (inches/mm) Style of base

Shaft diameter

4-BOLT

2-BOLT

inches

Pillow block number Series 1100 cast iron

A

B

C

D

E

F Bolts

G

H

L

M

S

T Unit wt. L (lbs.)

³⁄₄

1112

³⁄₄ 19.05

2³⁄₈ 60.3

3¹⁄₄ 82.6

1³⁄₈ 34.9

1 25.4

⁵⁄₁₆ 8

.... ....

³⁄₈ 9.5

1¹⁄₂ 38.1

1³⁄₁₆ 30.2

¹⁄₂ 12.7

¹⁄₈

.6

⁷⁄₈ ¹⁵⁄₁₆ 1

1114 1115 1116

⁷⁄₈ 22.22

3 76.2

4¹⁄₄ 108.0

2 50.8

1³⁄₈ 34.9

³⁄₈ 10

.... ....

¹⁄₂ 12.7

1³⁄₄ 44.4

1¹⁄₂ 38.1

⁵⁄₈ 15.9

¹⁄₈

1.4 1.3 1.2

1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

1118 1119 1120

1 25.40

3¹⁄₄ 82.6

4¹⁄₂ 114.3

2 50.8

1³⁄₈ 34.9

³⁄₈ 10

.... ....

¹⁄₂ 12.7

1³¹⁄₃₂ 50.0

1³⁄₄ 44.4

⁵⁄₈ 15.9

¹⁄₈

1.6 1.5 1.4

1⁷⁄₁₆ 1¹⁄₂

1123 1124

1¹⁄₄ 31.75

4 101.6

5¹⁄₄ 133.4

2¹⁄₂ 63.5

1⁵⁄₈ 41.3

³⁄₈ 10

.... ....

⁵⁄₈ 15.9

2³⁄₈ 60.3

2 50.8

⁵⁄₈ 15.9

¹⁄₈

2.1 2.0

1¹¹⁄₁₆ 1³⁄₄

1127 1128

1³⁄₈ 34.92

5 127.0

6³⁄₄ 171.4

3 76.2

2 50.8

¹⁄₂ 12

.... ....

³⁄₄ 19.0

2¹¹⁄₁₆ 68.3

2³⁄₈ 60.3

¹³⁄₁₆ 20.6

¹⁄₄

3.5 3.4

1¹⁵⁄₁₆ 2

1131 1132

1⁵⁄₈ 41.28

5¹⁄₂ 139.7

7¹⁄₄ 184.2

3¹⁄₂ 88.9

2¹⁄₄ 57.2

¹⁄₂ 12

.... ....

³⁄₄ 19.0

3³⁄₁₆ 81.0

2³⁄₄ 69.8

⁷⁄₈ 22.2

¹⁄₄

5.0 4.9

2³⁄₁₆

1135

1³⁄₄ 44.45

6 152.4

8 203.2

4 101.6

2³⁄₄ 69.8

⁵⁄₈ 16

.... ....

⁷⁄₈ 22.2

3¹⁄₂ 88.9

3¹⁄₈ 79.4

1 25.4

³⁄₈

6.8

2⁷⁄₁₆

1139

2 50.80

6¹⁄₂ 165.1

8¹⁄₂ 215.9

4¹⁄₂ 114.3

3 76.2

⁵⁄₈ 16

.... ....

1 25.4

3⁷⁄₈ 98.4

3³⁄₈ 85.7

1 25.4

³⁄₈

9.0

2¹¹⁄₁₆ 2¹⁵⁄₁₆

1143 1147

2¹⁄₄ 57.15

7 177.8

9¹⁄₄ 235.0

5 127.0

3¹⁄₄ 82.6

³⁄₄ 20

.... ....

1¹⁄₈ 28.6

4³⁄₈ 111.1

3³⁄₄ 95.2

1¹⁄₈ 28.6

³⁄₈

12.0 11.0

3⁷⁄₁₆

1155

2¹⁄₂ 63.50

8¹⁄₂ 215.9

11¹⁄₄ 285.8

6 152.4

4 101.6

⁷⁄₈ 24

.... ....

1¹⁄₄ 31.8

5 127.0

4¹⁄₂ 114.3

1³⁄₈ 34.9

¹⁄₂

19

3¹⁵⁄₁₆

1163F

3 76.20

10 254.0

12¹⁄₂ 317.5

7 177.8

5 127.0

³⁄₄ 20

2³⁄₄ 69.8

1³⁄₈ 34.9

6 152.4

5¹⁄₄ 133.4

1¹⁄₄ 31.8

¹⁄₂

31

Bold face items are normally available from stock; please consult for availability of non-stock items. L One pipe tapped hole for lubrication. Grease cup or fitting not included. Note: Approximate load ratings from babbitt ratings, page I-7. Selection guide, pages I-5, I-6. Additional information, page I-6.

I-10


2-1200, 2-1200Z Cast Iron Housing Two-piece Design 2-bolt Base Babbitt or Bronze Bearing Relubricatable


⁷⁄₈ ¹⁵⁄₁₆ 1

Series 2-1200 babbitt 2-1214 2-1215 2-1216

Pillow block g number Series 2-1200Z bronze 2-1214Z 2-1215Z 2-1216Z

1¹⁄₁₆ 1¹⁄₈ 1³⁄₁₆ 1¹⁄₄

2-1217 2-1218 2-1219 2-1220

1⁵⁄₁₆ 1³⁄₈ 1⁷⁄₁₆ 1¹⁄₂

Shaft dia. inches

A

B

C

D

E

F Bolts

H

L

M

P

S

T Unit wt. L (lbs.)

1 25.40

3⁵⁄₈ 92.1

4³⁄₄ 120.6

2 50.8

1³⁄₈ 34.9

³⁄₈ 10

⁹⁄₁₆ 14.3

2¹⁄₁₆ 52.4

1¹³⁄₁₆ 46.0

3 76.2

⁹⁄₁₆ 14.3

¹⁄₈

1.9 1.8 1.7

2-1217Z 2-1218Z 2-1219Z 2-1220Z

1¹⁄₄ 31.75

4¹⁄₈ 104.8

5¹⁄₄ 133.4

2¹⁄₂ 63.5

1⁵⁄₈ 41.3

³⁄₈ 10

⁵⁄₈ 15.9

2⁷⁄₁₆ 61.9

2 50.8

3¹⁄₂ 88.9

⁵⁄₈ 15.9

¹⁄₈

2.6 2.5 2.4 2.3

2-1221 2-1222 2-1223 2-1224

2-1221Z 2-1222Z 2-1223Z 2-1224Z

1³⁄₈ 34.92

4⁷⁄₈ 120.6

6¹⁄₄ 158.8

3 76.2

2 50.8

¹⁄₂ 12

³⁄₄ 19.0

2¹¹⁄₁₆ 68.3

2⁵⁄₁₆ 58.7

3⁷⁄₈ 95.2

¹¹⁄₁₆ 17.5

¹⁄₄

4.1 4.0 4.0 3.8

1⁹⁄₁₆ 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

2-1225 2-1226 2-1227 2-1228

2-1225Z 2-1226Z 2-1227Z 2-1228Z

1¹⁄₂ 38.10

5¹⁄₄ 133.4

6³⁄₄ 171.4

3¹⁄₂ 88.9

2¹⁄₄ 57.2

¹⁄₂ 12

¹³⁄₁₆ 20.6

3 76.2

2¹¹⁄₁₆ 68.3

4³⁄₈ 111.1

³⁄₄ 19.0

¹⁄₄

6.8 6.4 6.0 5.6

1¹⁵⁄₁₆ 2

2-1231 2-1232

2-1231Z 2-1232Z

1³⁄₄ 44.45

6 152.4

7¹⁄₂ 190.5

4 101.6

2¹⁄₂ 63.5

⁵⁄₈ 16

¹⁵⁄₁₆ 23.8

3⁷⁄₁₆ 87.3

3 76.2

4⁷⁄₈ 123.8

¹³⁄₁₆ 20.6

¹⁄₄

8.5 8.0

2³⁄₁₆ 2¹⁄₄

2-1235 2-1236

2-1235Z 2-1236Z

1⁷⁄₈ 47.62

6¹⁄₂ 165.1

8¹⁄₂ 215.9

4¹⁄₂ 114.3

2³⁄₄ 69.8

⁵⁄₈ 16

1 25.4

3³⁄₄ 95.2

3³⁄₈ 85.7

5¹⁄₄ 133.4

1 25.4

³⁄₈

11.0 11.0

2⁷⁄₁₆ 2¹⁄₂

2-1239 2-1240

2-1239Z 2-1240Z

2¹⁄₈ 53.98

7 177.8

8⁷⁄₈ 225.4

5 127.0

3 76.2

⁵⁄₈ 16

1¹⁄₈ 28.6

4³⁄₁₆ 106.4

3³⁄₄ 95.2

5³⁄₄ 146.0

1 25.4

³⁄₈

14.0 13.0

2¹¹⁄₁₆

2-1243

2-1243Z

2¹⁄₄ 57.15

7³⁄₄ 196.8

10 254.0

5¹⁄₂ 139.7

3¹⁄₄ 82.6

³⁄₄ 20

1³⁄₁₆ 30.2

4¹⁄₂ 114.3

4 101.6

6³⁄₈ 161.9

1¹⁄₈ 28.6

³⁄₈

19.0

2¹⁵⁄₁₆ 3

2-1247 2-1248

2-1247Z 2-1248Z

2¹⁄₂ 63.50

8¹⁄₂ 215.9

10³⁄₄ 273.0

6 152.4

3¹⁄₂ 88.9

³⁄₄ 20

1⁵⁄₁₆ 33.3

4⁷⁄₈ 123.8

4¹⁄₄ 108.0

6³⁄₄ 171.4

1¹⁄₈ 28.6

³⁄₈

23.0 22.0

3⁷⁄₁₆

2-1255

2-1255Z

2⁷⁄₈ 73.02

9¹⁄₄ 235.0

12 304.8

7 177.8

4 101.6

⁷⁄₈ 24

1¹⁄₂ 38.1

5⁵⁄₈ 142.8

5 127.0

7⁵⁄₈ 193.7

1³⁄₈ 34.9

¹⁄₂

35

3¹⁵⁄₁₆

2-1263

2-1263Z

3¹⁄₈ 79.38

10¹⁄₂ 266.7

13¹⁄₂ 342.9

8 203.2

4¹⁄₂ 114.3

1 24

1⁵⁄₈ 41.3

6³⁄₁₆ 157.2

5⁵⁄₈ 142.9

8¹⁄₂ 215.9

1¹⁄₂ 38.1

¹⁄₂

48

Bold face items are normally available from stock; please consult for availability of non-stock items. L One pipe tapped hole for lubrication. Grease cup or fitting not included. g LHD sliding base takeup can be drilled for 2-1200 pillow blocks, see page D-22. Selection guide, pages I-5, I-6. Load ratings, pages I-7, I-8. Additional information, page I-6.

I-11


2-1300 Cast Iron Housing Two-piece Design 4-bolt Base Babbitt Bearing Relubricatable

Dimensions (inches/mm) Style of cap

Shaft diameter

4-BOLT

inches

Pillow block number Series 2-1300 babbitt

A

B

C

D

E

F Bolts

G

H

L

M

P

S

T Unit wt. L (lbs.)

3⁷⁄₁₆

2-1355

3¹⁄₄ 82.55

10¹⁄₂ 266.7

13 330.2

7 177.8

5 127.0

³⁄₄ 20

2³⁄₄ 69.8

1³⁄₈ 34.9

6¹⁄₄ 158.8

5¹⁄₄ 133.4

8¹⁄₈ 206.4

1¹⁄₄ 31.8

¹⁄₂

43

3¹⁵⁄₁₆

2-1363

3¹⁄₂ 88.90

12 304.8

14³⁄₄ 374.6

8 203.2

5¹⁄₂ 139.7

³⁄₄ 20

3 76.2

1¹⁄₂ 38.1

6¹³⁄₁₆ 157.2

5⁷⁄₈ 149.2

9³⁄₈ 238.1

1³⁄₈ 34.9

¹⁄₂

61

4⁷⁄₁₆

2-1371

4¹⁄₈ 104.77

13¹⁄₂ 342.9

16¹⁄₂ 419.1

9 228.6

6¹⁄₄ 158.8

⁷⁄₈ 24

3¹⁄₂ 88.9

1³⁄₄ 44.4

7⁷⁄₈ 200.0

6⁵⁄₈ 168.3

10³⁄₈ 263.5

1¹⁄₂ 38.1

¹⁄₂

92

Bold face items are normally available from stock; please consult for availability of non-stock items. L One pipe tapped hole for lubrication. Grease cup or fitting not included. Selection guide, pages I-5, I-6. Load ratings, pages I-7, I-8. Additional information, page I-6.

I-12


2-1400, 2-1400Z, 2K1400Z Cast Iron or Cast Steel Housing Two-piece Gibbed t Design 4-bolt Base Babbitt or Bronze Bearing Relubricatable

Dimensions (inches/mm) Pillow block number g

4-BOLT

2-BOLT

Style of cap

Unit wt. (lbs.)

Shaft dia. inches

Cast Iron Series Series 2-1400 2-1400Z babbitt bronze

1¹⁵⁄₁₆

2-1431

2-1431Z

2K1431Z

1³⁄₄ 44.45

6¹⁄₂ 8¹⁄₄ 4 165.1 209.6 101.6

3¹⁄₂ 88.9

¹⁄₂ 12

1³⁄₄ 44.4

⁷⁄₈ 3⁷⁄₁₆ 22.2 87.3

3 76.2

4¹⁄₂ ³⁄₄ 114.3 19.0

¹⁄₄

10.0

11.0

2³⁄₁₆

2-1435

2-1435Z

2K1435Z

1⁷⁄₈ 47.62

6³⁄₄ 8¹⁄₂ 4¹⁄₂ 171.4 215.9 114.3

3¹⁄₂ 88.9

¹⁄₂ 12

1³⁄₄ 44.4

1 3³⁄₄ 25.4 95.2

3³⁄₈ 85.7

4¹⁵⁄₁₆ ³⁄₄ 125.4 19.0

³⁄₈

14.0

15.0

2⁷⁄₁₆

2-1439

2-1439Z

2K1439Z

2¹⁄₈ 53.98

8 10¹⁄₄ 5 203.2 260.4 127.0

4 101.6

⁵⁄₈ 16

2 50.8

1¹⁄₈ 4³⁄₁₆ 3³⁄₄ 28.6 106.4 95.2

5³⁄₈ 1 136.5 25.4

³⁄₈

19.0

21.0

2¹¹⁄₁₆

2-1443

2-1443Z

2K1443Z

2¹⁄₄ 57.15

8¹⁄₄ 10¹⁄₂ 5¹⁄₂ 209.6 266.7 139.7

4¹⁄₄ 108.0

⁵⁄₈ 16

2¹⁄₄ 57.2

1¹⁄₄ 4¹⁄₂ 4 6 1 31.8 114.3 101.6 152.4 25.4

³⁄₈

25.0

28.3

2¹⁵⁄₁₆

2-1447

2-1447Z

2K1447Z

2¹⁄₂ 63.50

8³⁄₄ 11 6 222.2 279.4 152.4

4¹⁄₂ 114.3

⁵⁄₈ 16

2¹⁄₂ 63.5

1³⁄₈ 4⁷⁄₈ 4¹⁄₄ 6⁷⁄₈ 1 34.9 123.8 108.0 174.6 25.4

³⁄₈

30

34

3⁷⁄₁₆

2-1455

2-1455Z

2K1455Z

3¹⁄₄ 82.55

10¹⁄₂ 13 7 266.7 330.2 177.8

5 127.0

³⁄₄ 20

2³⁄₄ 69.8

1³⁄₈ 6¹⁄₄ 5¹⁄₄ 8⁹⁄₃₂ 1¹⁄₄ 34.9 158.8 133.4 210.3 31.8

¹⁄₂

43

49

3¹⁵⁄₁₆

2-1463

2-1463Z

2K1463Z

3¹⁄₂ 88.90

12 14³⁄₄ 8 304.8 374.6 203.2

5¹⁄₂ 139.7

³⁄₄ 20

3 76.2

1¹⁄₂ 6¹³⁄₁₆ 5⁷⁄₈ 9¹³⁄₁₆ 1³⁄₈ 38.1 173.0 149.2 249.2 34.9

¹⁄₂

61

69

4⁷⁄₁₆

2-1471

2-1471Z

2K1471Z

4¹⁄₈ 13¹⁄₂ 16¹⁄₂ 9 104.78 342.9 419.1 228.6

6¹⁄₄ 158.8

⁷⁄₈ 24

3¹⁄₂ 88.9

1³⁄₄ 7⁷⁄₈ 6⁵⁄₈ 10¹⁄₄ 1¹⁄₂ 44.4 200.0 168.3 260.4 38.1

¹⁄₂

92

104

4¹⁵⁄₁₆

2-1479

2-1479Z

2K1479Z

4¹⁄₂ 15 18 114.30 381.0 457.2

10 254.0

7 177.8

⁷⁄₈ 24

4 1⁷⁄₈ 101.6 47.6

7¹⁄₄ 11³⁄₁₆ 1⁵⁄₈ 184.2 284.2 41.3

¹⁄₂

119

134

5⁷⁄₁₆

2-1487

2-1487Z

2K1487Z

5 15³⁄₄ 19¹⁄₄ 11 127.00 400.0 489.0 479.4

7³⁄₄ 196.8

1 24

4¹⁄₂ 2 9³⁄₈ 7⁷⁄₈ 12¹⁄₄ 1³⁄₄ 114.3 50.8 238.1 200.0 311.2 44.4

¹⁄₂

166

187

5¹⁵⁄₁₆

2-1495

2-1495Z

2K1495Z

5¹⁄₂ 16¹⁄₂ 20¹⁄₂ 12 139.70 419.1 520.7 304.8

8¹⁄₂ 215.9

1¹⁄₈ 30

5 2¹⁄₈ 10¹⁄₄ 8¹⁄₂ 13⁷⁄₈ 1⁷⁄₈ 127.0 54.0 260.4 215.9 352.4 47.6

¹⁄₂

198

213

6⁷⁄₁₆* 6¹⁄₂*

2-14103 2-14103Z 2K14103Z 2-14104 2-14104Z 2K14104Z

6 18 152.40 457.2

22 13 558.8 330.2

9¹⁄₂ 241.3

1¹⁄₈ 30

5¹⁄₂ 2¹⁄₄ 139.7 57.2

¹⁄₂

260 255

294 287

7

2-14112 2-14112Z 2K14112Z

6¹⁄₂ 19 23 14 165.10 482.6 584.2 355.6

10 254.0

1¹⁄₄ 30

6 2³⁄₈ 11³⁄₄ 9³⁄₄ 152.4 60.3 298.4 247.6

15⁷⁄₈ 2 403.2 50.8

¹⁄₂

311

350

7¹⁄₂* 8*

2-14120 2-14120Z 2K14120Z 2-14128 2-14128Z 2K14128Z

7 21¹⁄₂ 26 16 177.80 546.1 660.4 406.4

11 279.4

1³⁄₈

6³⁄₄ 2¹⁄₂ 13⁵⁄₁₆ 11³⁄₈ 17⁷⁄₈ 2¹⁄₄ 171.4 63.5 338.1 288.9 454.0 57.2

¹⁄₂

459 425

525 478

9*

. . . . . . . . . . . . . . . 2K14144Z

8 23 29 16 203.20 584.2 736.6 406.4

10¹⁄₂ 266.7

1¹⁄₂ 36

6 2³⁄₄ 14⁷⁄₈ 152.4 69.8 377.8

2³⁄₄ 69.8

¹⁄₂

482

530

10*

. . . . . . . . . . . . . . . 2K14160Z

9 25 31 228.60 635.0 787.4

16 406.4

10¹⁄₂ 266.7

1³⁄₄ 48

6 3 16⁷⁄₈ 14 22⁷⁄₈ 3 152.4 76.2 428.6 355.6 581.0 76.2

¹⁄₂

592

650

12*

. . . . . . . . . . . . . . . 2K14192Z

11 29 36 18 279.40 736.6 914.4 457.2

12¹⁄₂ 317.5

2 48

7¹⁄₂ 3¹⁄₂ 20 16 27 3¹⁄₂ 190.5 88.9 508.0 406.4 685.8 88.9

¹⁄₂

830

910

Cast steel Series 2K1400Z bronze

A

B

C

D

E

F Bolts

G

H

L

8⁹⁄₁₆ 217.5

M

P

S

11 9¹⁄₈ 15¹⁄₈ 1⁷⁄₈ 279.4 231.8 384.2 47.6

12¹⁄₂ 317.5

20³⁄₈ 517.5

T L

Cast iron Cast steel

Bold face items are normally available from stock; please consult for availability of non-stock items. L One pipe tapped hole (two holes for shafts larger than 5") for lubrication. Grease cup or fitting not included. g LHD sliding base takeup can be drilled for 2-1400 pillow blocks, for shaft sizes thru 3¹⁵⁄₁₆ see page D-22, for shaft sizes 4⁷⁄₁₆ thru 5¹⁵⁄₁₆ see page E-25. * Cap is fastened with capscrews. Selection guide, pages I-5, I-6. Load ratings, pages I-7, I-8. Additional information, page I-6.

I-13


2-1500, 2-1500Z Cast Iron Two-Piece Angular t Design 4-bolt Base Babbitt or Bronze Bearing Relubricatable


4-BOLT

2-BOLT

Shaft Style dia. of cap inches

Pillow block number Cast Iron Series 2-1500 babbitt

Series 2-1500Z bronze

A

B

C

D

E

F Bolts

G

H

L

M

P

S

T L

Unit wt. (lbs.)

1¹⁵⁄₁₆

2-1531

2-1531Z

2¹⁄₄ 57.15

6¹⁄₂ 165.1

8¹⁄₄ 209.6

4 101.6

3¹⁄₂ 88.9

¹⁄₂ 12

1³⁄₄ 44.4

⁷⁄₈ 22.2

4¹⁄₂ 114.3

3 76.2

5¹⁄₄ 133.4

³⁄₄ 19.0

¹⁄₄

10.0

2³⁄₁₆

2-1535

2-1535Z

2¹⁄₂ 63.50

6³⁄₄ 171.4

8¹⁄₂ 215.9

4¹⁄₂ 114.3

3¹⁄₂ 88.9

¹⁄₂ 12

1³⁄₄ 44.4

1 25.4

4⁷⁄₈ 123.8

3³⁄₈ 85.7

5³⁄₄ 146.0

³⁄₄ 19.0

³⁄₈

14.0

2⁷⁄₁₆

2-1539

2-1539Z

2³⁄₄ 69.85

8 203.2

10¹⁄₄ 260.4

5 127.0

4 101.6

⁵⁄₈ 16

2 50.8

1¹⁄₈ 28.6

5⁵⁄₁₆ 134.9

3³⁄₄ 95.2

6¹⁄₈ 155.6

1 25.4

³⁄₈

17.0

2¹¹⁄₁₆

2-1543

2-1543Z

3 76.20

8¹⁄₄ 209.6

10¹⁄₂ 266.7

5¹⁄₂ 139.7

4¹⁄₄ 108.0

⁵⁄₈ 16

2¹⁄₄ 57.2

1¹⁄₄ 31.8

6 152.4

4 101.6

7 177.8

1 25.4

³⁄₈

27.0

2¹⁵⁄₁₆

2-1547

2-1547Z

3¹⁄₄ 82.55

8³⁄₄ 222.2

11 279.4

6 152.4

4¹⁄₂ 114.3

⁵⁄₈ 16

2¹⁄₂ 63.5

1³⁄₈ 34.9

6³⁄₈ 161.9

4¹⁄₄ 108.0

7¹⁄₂ 190.5

1 25.4

³⁄₈

29.0

3⁷⁄₁₆

2-1555

2-1555Z

3¹⁄₂ 88.90

10¹⁄₂ 266.7

13 330.2

7 177.8

5 127.0

³⁄₄ 20

2³⁄₄ 69.8

1¹⁄₂ 38.1

7¹⁄₈ 181.0

5¹⁄₄ 133.4

9 228.6

1¹⁄₄ 31.8

¹⁄₂

43

3¹⁵⁄₁₆

2-1563

2-1563Z

3³⁄₄ 95.25

12 304.8

14³⁄₄ 374.6

8 203.2

5¹⁄₂ 139.7

³⁄₄ 20

3 76.2

1⁵⁄₈ 41.3

8¹⁄₄ 209.6

5⁷⁄₈ 149.2

10¹⁄₄ 260.4

1³⁄₈ 34.9

¹⁄₂

60

4⁷⁄₁₆

2-1571

2-1571Z

4¹⁄₈ 104.78

13¹⁄₂ 342.9

16¹⁄₂ 419.1

9 228.6

6¹⁄₄ 158.8

⁷⁄₈ 24

3¹⁄₂ 88.9

1³⁄₄ 44.4

8⁷⁄₈ 225.4

6⁵⁄₈ 168.3

11 279.4

1¹⁄₂ 38.1

¹⁄₂

87

4¹⁵⁄₁₆

2-1579

2-1579Z

4¹⁄₂ 114.30

15 381.0

18 457.2

10 254.0

7 177.8

⁷⁄₈ 24

4 101.6

1⁷⁄₈ 47.6

9³⁄₄ 247.6

7¹⁄₄ 184.2

12 304.8

1⁵⁄₈ 41.3

¹⁄₂

119

5⁷⁄₁₆

2-1587

2-1587Z

5 127.00

15³⁄₄ 400.0

19³⁄₄ 501.6

11 479.4

8 203.2

1 24

4¹⁄₂ 114.3

2 50.8

10¹³⁄₁₆ 274.6

7⁷⁄₈ 200.0

13¹⁄₂ 342.9

1⁷⁄₈ 47.6

¹⁄₂

163

5¹⁵⁄₁₆*

2-1595

2-1595Z

5¹⁄₂ 139.70

16¹⁄₂ 419.1

20¹⁄₂ 520.7

12 304.8

8¹⁄₂ 215.9

1¹⁄₈ 30

5 127.0

2¹⁄₈ 54.0

11²⁹⁄₃₂ 302.4

8¹⁄₂ 215.9

14⁵⁄₈ 371.5

1⁷⁄₈ 47.6

¹⁄₂

192

6¹⁄₂*

2-15104

2-15104Z

6 152.40

18 457.2

22 558.8

13 330.2

9¹⁄₂ 241.3

1¹⁄₈ 30

5¹⁄₂ 139.7

2¹⁄₄ 57.2

11³⁄₄ 298.4

9¹⁄₈ 231.8

14³⁄₄ 374.6

1⁷⁄₈ 47.6

¹⁄₂

255

7*

2-15112

2-15112Z

6¹⁄₂ 165.10

19 482.6

23 584.2

14 355.6

10 254.0

1¹⁄₄ 30

6 152.4

2³⁄₈ 60.3

13¹¹⁄₁₆ 347.7

9³⁄₄ 247.6

16⁵⁄₈ 422.3

2 50.8

¹⁄₂

295

8* 9*

2-15128 .......

2-15128Z ......

8 203.20

23 584.2

29 736.6

16 406.4

10¹⁄₂ 266.7

1¹⁄₂ 36

6 152.4

2³⁄₄ 69.8

16¹⁄₈ 409.6

12¹⁄₂ 317.5

22 558.8

2³⁄₄ 69.8

¹⁄₂

575 546

Bold face items are normally available from stock; please consult for availability of non-stock items. L One pipe tapped hole (two holes for shafts larger than 5") for lubrication. Grease cup or fitting not included. * Cap is fastened with capscrews, and block has gibbed t. Selection guide, pages I-5, I-6. Load ratings, pages I-7, I-8. Additional information, page I-6.

I-14

Rigid Sleeve Bearing Flanged Units

F2200, F2200Z Cast Iron Housing One-piece Design 4-bolt Mounting Square Flange Babbitt or Bronze Bearing Relubricatable


Flange unit number

A B

inches

Series F2200 babbitt

Series F2200Z bronze

Max.

Min.

C

D

F Bolts

H

M

T L

Unit wt. (lbs.)

³⁄₄

F2212

F2212Z

2¹⁄₂ 63.5

2¹⁄₈ 54.0

3 76.2

3³⁄₈ 85.7

1¹⁄₂ 38.1

³⁄₈ 10

⁷⁄₁₆ 11.1

1¹⁄₂ 38.1

¹⁄₈

1.7

⁷⁄₈ ¹⁵⁄₁₆ 1

F2214 F2215 F2216

F2214Z F2215Z F2216Z

2³⁄₄ 69.8

2¹⁄₈ 54.0

3 76.2

3³⁄₄ 95.2

2 50.8

³⁄₈ 10

¹⁄₂ 12.7

1⁷⁄₈ 47.6

¹⁄₈

2.5 2.5 2.4

1³⁄₁₆ 1¹⁄₄

F2219 F2220

F2219Z F2220Z

3¹⁄₄ 82.6

2¹⁄₂ 63.5

3⁹⁄₁₆ 90.5

4¹⁄₄ 108.0

2¹⁄₂ 63.5

¹⁄₂ 12

⁵⁄₈ 15.9

2¹⁄₄ 57.2

¹⁄₈

3.7 3.6

1⁷⁄₁₆ 1¹⁄₂

F2223 F2224

F2223Z F2224Z

4 101.6

2²⁹⁄₃₂ 73.8

4¹⁄₈ 104.8

5¹⁄₈ 130.2

3 76.2

¹⁄₂ 12

³⁄₄ 19.0

2¹⁄₂ 63.5

¹⁄₄

5.0 4.8

1¹¹⁄₁₆ 1³⁄₄

F2227 F2228

F2227Z F2228Z

4¹⁄₈ 104.8

3⁹⁄₃₂ 83.3

4⁵⁄₈ 117.5

5³⁄₈ 136.5

3¹⁄₂ 88.9

¹⁄₂ 12

³⁄₄ 19.0

2⁷⁄₈ 73.0

¹⁄₄

10.4 10.2

1¹⁵⁄₁₆ 2

F2231 F2232

F2231Z F2232Z

5¹⁄₈ 130.2

3²³⁄₃₂ 94.4

5¹⁄₄ 133.4

6³⁄₈ 161.9

4 101.6

⁵⁄₈ 16

⁷⁄₈ 22.2

3¹⁄₄ 82.6

¹⁄₄

10.6 10.3

2³⁄₁₆

F2235

F2235Z

5¹⁄₈ 130.2

4¹⁄₁₆ 103.2

5³⁄₄ 146.0

6³⁄₈ 161.9

4¹⁄₂ 114.3

⁵⁄₈ 16

⁷⁄₈ 22.2

3⁵⁄₈ 92.1

¹⁄₄

14.8

2⁷⁄₁₆

F2239

F2239Z

5⁵⁄₈ 142.9

4¹³⁄₃₂ 111.9

6¹⁄₄ 158.8

6⁷⁄₈ 174.6

5 127.0

⁵⁄₈ 16

1 25.4

4 101.6

³⁄₈

16.5

2¹⁵⁄₁₆ 3

F2247 F2248

F2247Z F2248Z

6 152.4

5⁷⁄₃₂ 132.6

7³⁄₈ 187.3

7³⁄₄ 196.8

6 152.4

³⁄₄ 20

1¹⁄₈ 28.6

4³⁄₄ 120.6

³⁄₈

27.0 26.3

3⁷⁄₁₆

F2255

F2255Z

6³⁄₄ 171.4

5²⁹⁄₃₂ 150.0

8³⁄₈ 212.7

8⁹⁄₁₆ 217.5

7 177.8

³⁄₄ 20

1¹⁄₄ 31.8

5¹⁄₂ 139.7

¹⁄₂

40.5

3¹⁵⁄₁₆

F2263

F2263Z

7⁵⁄₈ 193.7

6²³⁄₃₂ 170.6

9¹⁄₂ 241.3

9³⁄₄ 247.6

8 203.2

⁷⁄₈ 24

1¹⁄₂ 38.1

6³⁄₈ 161.9

¹⁄₂

65

Bold face items are normally available from stock; please consult for availability of non-stock items. L One pipe tapped hole for lubrication. Grease cup or fitting not included. Selection guide, pages I-5, I-6. Load ratings, pages I-7, I-8. Additional information, page I-6.

I-15

Rigid Sleeve Bearing Takeups

DSB2800 Hinged or Removable Frame Protected Screw Babbitt Bearing Relubricatable


HINGED

REMOVABLE

Style of top frame

Shaft dia.

Adjustment G

inches

mm

in.

1¹⁵⁄₁₆

304.8 457.2

12 18

DSB2831-12 DSB2831-18

3¹⁄₄ 82.6

26¹⁄₂ 673.1 32¹⁄₂ 825.5

29¹⁄₂ 749.3 35¹⁄₂ 901.7

4 101.6

3 76.2

⁵⁄₈ 16

. . . . 1³⁄₄ 7³⁄₄ 7³⁄₄ . . . . 44.4 196.8 196.8

7¹⁄₄ 184.2

¹⁄₄

1.0

39 45

2³⁄₁₆

304.8 457.2

12 18

DSB2835-12 DSB2835-18

3³⁄₈ 85.7

27¹⁄₂ 698.5 33¹⁄₂ 850.9

29¹⁄₂ 749.3 35¹⁄₂ 901.7

4 114.3

3 76.2

⁵⁄₈ 16

. . . . 1³⁄₄ 7³⁄₄ 7³⁄₄ . . . . 44.4 196.8 196.8

7¹⁄₄ 184.2

³⁄₈

1.0

42 48

2⁷⁄₁₆

304.8 457.2 609.6

12 18 24

DSB2839-12 DSB2839-18 DSB2839-24

3¹⁄₂ 88.9

28¹⁄₂ 723.9 34¹⁄₂ 876.3 40¹⁄₂ 1028.7

30¹⁄₂ 774.7 5 36¹⁄₂ 927.1 127.0 42¹⁄₂ 1079.5

3 76.2

³⁄₄ 20

. . . . 1³⁄₄ 8¹⁄₄ 8¹⁄₄ . . . . 44.4 209.6 209.6

7¹⁄₂ 190.5

³⁄₈

1.0

49 55 60

2¹⁵⁄₁₆

304.8 457.2 609.6

12 18 24

DSB2847-12 DSB2847-18 DSB2847-24

4¹⁄₈ 104.8

30¹⁄₂ 774.7 36¹⁄₂ 927.1 42¹⁄₂ 1079.5

32¹⁄₂ 825.5 38¹⁄₂ 977.9 44¹⁄₂ 1130.2

6 152.4

4 101.6

⁵⁄₈ 16

2 2 9¹⁄₄ 9¹⁄₄ 50.8 50.8 235.0 235.0

8³⁄₄ 222.2

³⁄₈

1.0

72 81 89

3⁷⁄₁₆

304.8 457.2 609.6

12 18 24

DSB2855-12 DSB2855-18 DSB2855-24

4¹⁄₂ 114.3

32 38 44

812.8 965.2 1117.6

34¹⁄₄ 870.0 7 40¹⁄₄ 1022.4 177.8 46¹⁄₄ 1174.8

4 101.6

³⁄₄ 20

2 2 10 10 50.8 50.8 254.0 254.0

9¹¹⁄₁₆ 246.1

¹⁄₂

1.0

94 103 111

3¹⁵⁄₁₆

304.8 457.2 609.6

12 18 24

DSB2863-12 DSB2863-18 DSB2863-24

5 127.0

36 42 48

914.4 1066.8 1219.2

38¹⁄₂ 977.9 8 44¹⁄₂ 1130.3 203.2 50¹⁄₂ 1282.7

5 127.0

³⁄₄ 20

2¹⁄₂ 2¹⁄₄ 12 12 63.5 57.2 304.8 304.8

10¹⁵⁄₁₆ 277.8

¹⁄₂

1.0

138 150 160

Takeup number

A

B

C

D

E

F Bolts

G

H

K

KK

L

X L

Radial Unit wt. factor (lbs.)

l

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement bearing unit, specify takeup number without amount of adjustment, i.e., DSB2831. G Takeups with adjustment of 18" (457.2 mm) or more have center ing pad welded to bottom of frame. l For radial loads, multiply load rating from page I-8 by radial factor in last column. L One pipe tapped hole for lubrication. Grease cup or lubrication fitting not included. Selection guide, pages I-5, I-6. Load ratings, pages I-7, I-8. Additional information, page I-6.

I-16

Replacement Bronze Bearings and Shims

Series 1000Z, F2200Z, 2-1200Z

Series 1000Z, F2200Z Shaft diameter, inches

¹⁄₂ ⁵⁄₈ ³⁄₄ ³⁄₄ ⁷⁄₈ ¹⁵⁄₁₆ 1 1¹⁄₈ 1³⁄₁₆ 1¹⁄₄ 1⁷⁄₁₆ 1¹⁄₂ 1¹¹⁄₁₆ 1³⁄₄ 1¹⁵⁄₁₆ 2 2³⁄₁₆ 2⁷⁄₁₆ 2¹¹⁄₁₆ 2¹⁵⁄₁₆ 3 3⁷⁄₁₆ 3¹⁵⁄₁₆

Sleeve bearing series

1008Z 1010Z 1012Z F2212Z 1014Z, F2214Z 1015Z, F2215Z 1016Z, F2216Z 1018Z 1019Z, F2219Z 1020Z, F2220Z 1023Z, F2223Z 1024Z, F2224Z 1027Z, F2227Z 1028Z, F2228Z 1031Z, F2231Z 1032Z, F2232Z 1035Z, F2235Z 1039Z, F2239Z 1043Z 1047Z, F2247Z F2248Z 1055Z, F2255Z 1063Z, F2263Z

Series 2-1200Z two-piece Replacement bearing number

Shaft diameter, inches

285Y222-101 285Y222-104 285Y222-105 285Y222-96 285Y222-1 285Y222-2 285Y222-3 285Y222-4 285Y222-5 285Y222-6 285Y222-9 285Y222-10 285Y222-11 285Y222-12 285Y222-13 285Y222-14 285Y222-15 285Y222-17 285Y222-20 285Y222-23 285Y222-24 285Y222-25 285Y222-27

⁷⁄₈ ¹⁵⁄₁₆ 1 1¹⁄₈ 1³⁄₁₆ 1¹⁄₄ 1³⁄₈ 1⁷⁄₁₆ 1¹⁄₂ 1⁹⁄₁₆ 1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄ 1¹⁵⁄₁₆ 2 2³⁄₁₆ 2¹⁄₄ 2⁷⁄₁₆ 2¹⁄₂ 2¹¹⁄₁₆ 2¹⁵⁄₁₆ 3 3⁷⁄₁₆ 3¹⁵⁄₁₆

Bronze replacement bearings are solid with lube groove. Provision should be made to lock the bearing to the housing.

I-17


2-1214Z 2-1215Z 2-1216Z 2-1218Z 2-1219Z 2-1220Z 2-1222Z 2-1223Z 2-1224Z 2-1225Z 2-1226Z 2-1227Z 2-1228Z 2-1231Z 2-1232Z 2-1235Z 2-1236Z 2-1239Z 2-1240Z 2-1243Z 2-1247Z 2-1248Z 2-1255Z 2-1263Z

Replacement bearing number

285BY2-4 285BY2-5 285BY2-6 285BY2-7 285BY2-8 285BY2-9 285BY2-10 285BY2-11 285BY2-12 285BY2-13 285BY2-14 285BY2-15 285BY2-16 285BY2-17 285BY2-18 285BY2-19 285BY2-20 285BY2-22 285BY2-24 285BY2-25 285BY2-29 285BY2-30 285BY2-32 285BY2-36

Replacement shim Number

Quantity

131Y954-1 131Y954-21 131Y954-21 131Y954-2 131Y954-22 131Y954-22 131Y954-23 131Y954-23 131Y954-23 131Y954-24 131Y954-24 131Y954-24 131Y954-24 131Y954-25 131Y954-25 131Y954-26 131Y954-26 131Y954-27 131Y954-27 131Y954-28 131Y954-29 131Y954-29 131Y954-30 131Y954-31

2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

Replacement bronze bearings are pre-split with lube groove. Provision should be made to lock each bearing segment to the base and cap. Replacement bronze bearings and shims must be ordered as individual items.

Replacement Bronze Bearings and Shims

Series 2-1400Z, 2K1400Z, 2-1500Z

Series 2-1400Z, 2K1400Z straight two-piece Shaft diameter, inches 1¹⁵⁄₁₆ 2³⁄₁₆ 2⁷⁄₁₆ 2¹¹⁄₁₆ 2¹⁵⁄₁₆ 3⁷⁄₁₆ 3¹⁵⁄₁₆ 4⁷⁄₁₆ 4⁷⁄₁₆ 4¹⁵⁄₁₆ 4¹⁵⁄₁₆ 5⁷⁄₁₆ 5¹⁵⁄₁₆ 6⁷⁄₁₆ 6¹⁄₂ 7 7¹⁄₂ 8 9 10 12


Replacement bearing number

2-1431Z, 2K1431Z 2-1435Z, 2K1435Z 2-1439Z, 2K1439Z 2-1443Z, 2K1443Z 2-1447Z, 2K1447Z 2-1455Z, 2K1455Z 2-1463Z, 2K1463Z 2-1471Z 2K1471Z 2-1479Z 2K1479Z 2-1487Z, 2K1487Z 2-1495Z, 2K1495Z 2-14103Z, 2K14103Z 2-14104Z, 2K14104Z 2-14112Z, 2K14112Z 2-14120Z, 2K14120Z 2-14128Z, 2K14128Z 2K14144Z 2K14160Z 2K14192Z

285BY3-1 285BY3-3 285BY3-7 285BY3-9 285BY3-13 285BY3-17 285BY3-19 285BY3-21 285BY3-22 285BY3-25 285BY3-26 285BY3-29 285BY3-31 285BY3-33 285BY3-34 285BY3-35 285BY3-36 285BY3-37 285BY3-38 285BY3-40 285BY3-41

Replacement shim Number

Quantity per unit

131Y366-1 131Y366-3 131Y366-5 131Y366-7 131Y366-9 131Y366-11 131Y366-13 131Y366-15 131Y366-15 131Y366-17 131Y366-17 131Y366-18 131Y366-21 131Y366-22 131Y366-22 131Y366-25 131Y366-28 131Y366-30 131Y366-20 131Y366-24 131Y366-26

4 4 4 4 4 6 6 8 8 8 8 12 12 12 12 12 12 12 2 2 2

Series 2-1500Z angular two-piece Shaft diameter, inches 1¹⁵⁄₁₆ 2³⁄₁₆ 2⁷⁄₁₆ 2¹¹⁄₁₆ 2¹⁵⁄₁₆ 3⁷⁄₁₆ 3¹⁵⁄₁₆ 4⁷⁄₁₆ 4¹⁵⁄₁₆ 5⁷⁄₁₆ 5¹⁵⁄₁₆ 6¹⁄₂ 7 8

Sleeve bearing series 2-1531Z 2-1535Z 2-1539Z 2-1543Z 2-1547Z 2-1555Z 2-1563Z 2-1571Z 2-1579Z 2-1587Z 2-1595Z 2-15104Z 2-15112Z 2-15128Z

Replacement bearing number 285BY2-17 285BY2-19 285BY2-22 285BY2-25 285BY2-29 285BY2-33 285BY2-37 285BY2-40 285BY2-42 285BY2-44 285BY3-31 285BY3-34 285BY3-35 285BY3-37

Replacement shim Number 131Y954-25 131Y954-26 131Y954-27 131Y954-28 131Y954-29 131Y954-9 131Y954-10 131Y954-11 131Y954-12 131Y954-34 131Y366-21 131Y366-22 131Y366-25 131Y366-16

Quantity per unit 4 4 4 4 4 6 6 8 8 12 12 12 12 2

Replacement bronze bearings are pre-split with lube groove. Provision should be made to lock each bearing segment to the base and cap. Replacement bronze bearings and shims must be ordered as individual items.

I-18

Series 3200

Flex-block® Sleeve Bearing Units

a Sturdy one-piece housings, with machined mounting surfaces, are available as pillow blocks or flanged units.

Flex-block sleeve bearing units are designed specifically for applications requiring alignable sleeve bearings — self-lubricating. Because the bearing material wears gradually under operation, sudden breakdowns and costly maintenance are minimized. The standard bearing insert materials of oil impregnated porous sintered bronze, or self-lubricating graphite are widely used for the extreme applications of modern industry.

b Component has machined spherical surface for proper seating in housing and for initial mounting alignment. c Bearing sleeve, pressed into component, is available in self-lubricating or oil impregnated material. d When the component retaining screw is loosened, the insert can be rotated 180° to utilize unused bearing surface and extend the life of unit.

a

b

d

Components, Bearings Heart of the Flex-block bearing is the alignable insert into which is pressed a self-lubricating bearing. The component has a machined spherical surface that is alignable in the housing.

Two types of bearings are available: 1. Sintered bronze sleeve, oil impregnated, for operating temperatures to 200°F (93 °C) . 2. Self-lubricating carbon-graphite sleeve, for temperatures to 700°F (371 °C).

I-19

c

One-piece Cast Iron Housings Compact one-piece cast iron housings provide strength and superior rigidity. All units are designed with standard mounting dimensions and have finished mounting surfaces for proper installation stability. Pillow blocks have slotted bolt holes with ample space provided for drilling dowel pin holes. Flanged units have drilled mounting holes.

Pillow Blocks 3200P Alignable pillow blocks have high-test iron housing, 2-bolt base, and self-lubricating or relubricatable bearing. For shaft sizes ⁵⁄₈" through 3¹⁵⁄₁₆".

Load ratings on pages I-23 and I-24. Dimensions on page I-25. Additional information on page I-22.

Flanged Units — two bolt 3200FX and 3200F Alignable flanged units have 2-bolt cast iron housing and selflubricating or relubricatable bearing. For shaft sizes ⁵⁄₈" through 1³⁄₄".

Load ratings on pages I-23 and I-24. Dimensions on page I-26. Additional information on page I-22.

Flanged Units — four bolt Alignable flanged units have 4-bolt cast iron housing and selflubricating or relubricatable bearing. For shaft sizes ⁵⁄₈" through 3⁷⁄₁₆".

Load ratings on pages I-23 and I-24. Dimensions on pages I-27. Additional information on page I-22.

I-20

Selection


To select a Flex-block sleeve bearing, determine the applied radial load and the applicable operating conditions. The procedure shown here will aid in selecting an appropriate bearing. The bearing ratings apply when certain installation and operating conditions are met and when any other adverse ambient conditions such as high or low temperatures, extreme dirt or moisture, chemical contamination, shock or vibration loading direct or induced, oscillating shafts, intermittent operation and related factors are carefully considered.

Flex-block Selection Step 1 Determine the maximum operating temperature of the application. Step 2 From Table 1, select the bearing insert material. Step 3 Refer to the radial load rating tables on pages I-23 and I-24 to determine the shaft diameter necessary to obtain the required radial load rating at the given speed. Where short bearings are required, multiply the radial load by the short bearing factor before selecting the bearing.

Step 4 To position a shaft axially or where light thrust loads are present provide flat washers of the desired material backed by a shaft collar or a machined shaft shoulder against the end of the bearing. The bearing ends are already machined.

I- 21

improved bearing performance the shaft finish should not exceed 12 micro-inches (0.3 µm). Shafting should also be within the diameter tolerances listed on page I-22.

The ratings used apply when the following conditions are met: 1. Normal running loads should not exceed the ratings shown in the tables. Starting and occasional peak loads should not exceed these ratings by more than 100%. 2. The shaft finish through the bearing bore should be at least as smooth as commercial steel shafting which varies from 8 to 50 micro-inches (0.2 µm to 1.3µm) . There also should be no machined or ground spiral lead on the shaft journal. For

3. Ambient temperatures should not be lower than 32°F (0 °C) for T1 bearing material. The upper operating temperature limits are as follows: T1—200°F (93 ° C) T3—700°F (371° C) 4. Sturdy, vibration free ing structures should be provided. 5. Flex-block units should not be exposed to severe dirt conditions.

Table 1 • Bearing insert material selection Bearing insert suffix

Type of lubrication

Bearing material

T1

Oil impregnated porous sintered bronze

T3

Machined carbon-graphite

Bearing insert suffix

Minimum temperature limit

Type of unit

Available bore size

oil

P FX F

⁵⁄₈"—3¹⁵⁄₁₆" ⁵⁄₈"—1³⁄₄" ⁵⁄₈"—3⁷⁄₁₆"

self-lubricating

P FX F

⁵⁄₈"—3¹⁵⁄₁₆" ⁵⁄₈"—1³⁄₄" ⁵⁄₈"—3⁷⁄₁₆"

Maximum temperature limit

T1

32°F (0 °C)

200°F (93° C)

T3

....

700°F (371 °C)

Comments

material somewhat brittle—handle with care—no significant shock loads

Selection, Additional Information

Flex-block® Sleeve Bearing Units Flex-block Bearing Materials:

Additional Features:

Sleeve bearing inserts made of T1 oil impregnated porous sintered bronze are universally accepted as providing reasonable capacity and dependable service. When lubricant is present damage to shafts or rotors is minimized. Additional SAE 40 oil can be periodically added to extend the bearing life. The T1 bearing operating temperature should not exceed 200°F (93 °C). Applications are restricted to those involving light to moderate loads and mild shock. Caution: Do not use stainless steel shaft.

By the very nature of their design all Flex-block sleeve bearing units are expansion type, in that the shaft journal is free to move axially through the bore of the bearing. To fix a unit, a combination of shaft shoulders and/or thrust collars with flat washers of the desired material can be utilized.

T3 machined carbon graphite bearings are self-lubricating with material worn from the bearing. T3 bearing inserts are limited to a maximum operating temperature of 700°F (371°C). The radial load applied, the shaft surface finish and the speed of operation determine the wear life of the bearing. As machined carbon graphite is somewhat brittle, care should be taken during handling and mounting to avoid chipping the corners, etc.

Bearings are not replaceable in the components. Replacement components can be ordered but generally the entire unit is replaced when required.

Flex-block sleeve bearing units are selflubricating and ready for operation. Being alignable, they are also easy to mount and careful shaft alignment is not required. However shaft journals must turn freely without binding in the bearing or excessive heat and seizure can result. Any factors which may disrupt or remove the lubricant film should be eliminated. Sharp edges on the shaft or the bearing surface can act as scrapers to destroy lubricant film. Do not extend shaft keyways into bearing bores.

Two and four bolt flanged units can be supplied with regular or short bearings.

Takeups:

Flex-block pillow blocks have cored mounting bolt holes suitable for the inch or metric bolts listed. Flanged units have drilled mounting holes ¹⁄₃₂" (0.8 mm) larger than the largest inch bolt shown.

The short bearing inserts do not project beyond the housing mounting face. When the short bearing is selected, the applied radial load must be multiplied by the short bearing factor before selecting the bearing size.

End closures can be furnished but they require specially machined housings. When end closures are used, shafts should extend no more than ¹⁄₈" (3.2 mm) beyond the end of the bearing.

Operation:

Flex-block pillow blocks can be mounted on universal takeup frames LC illustrated on page I-28.

Shaft Tolerances: Shaft diameters for Flex-block sleeve bearing units are usually held to the following regular commercial tolerances: Shaft Diameters ⁵⁄₈" through 2" 2¹⁄₁₆" through 4"

Recommended Tolerance Nominal to –.003" Nominal to –.004"

Commercial shaft finish if free of nicks, burrs, scratches, etc. is generally satisfactory. Improved surface finish of 12 micro-inches (0.3 µm) or less will extend wear life.

Caution: Do not use stainless steel shaft, if bearing insert T1 is used.

Warning: The reliability built in all Link-Belt bearings can be realized in service only when bearings are correctly selected, properly installed, protected and maintained. The correct selection of Flex-block sleeve bearing mounted units requires that the magnitude and nature of all loads, speeds, alignment, mounting, operating requirements and maintenance be adequately considered. The selection of materials for and design of

shafting, fasteners, seals and accessories as well as provisions for installation and maintenance must follow good engineering principles. Housings should not be used under tension loads except with adequate safety factors. For this reason pillow blocks are best suited to withstand radial loads ing through the base. When heavy loads or shock loads are possible it is most important to mount a unit so that the line of force es

directly into the mounting surface, or so that the unit is directly and substantially ed other than through its mounting bolts. Where the line of force falls outside the mounting surface, serious housing and fastener deflection or failure may occur. Link-Belt Bearing Division, Rexnord Corp. should be consulted where unusual loading conditions exist.

I- 22

Load Ratings


Radial load ratings for 10 to 300 RPM (pounds/ newtons)L Shaft diameter inches

Basic Type bearing bearing number material

Shaft speed RPM 10 to 25

50

75

100

150

200

300

Short bearing factor

⁵⁄₈ ¹¹⁄₁₆

3210 3211

T1 T3

586 296

2 607 1 317

586 296

2 607 1 317

586 2 607 296 1 317

586 2 607 296 1 317

476 2 117 240 1 068

357 1 588 180 801

238 1 059 120 534

...

³⁄₄

3212

T1 T3

940 470

4 181 2 091

940 470

4 181 2 091

940 4 181 470 2 091

940 4 181 470 2 091

638 2 838 318 1 415

479 2 131 240 1 068

318 1 415 159 707

1.25

⁷⁄₈ ¹⁵⁄₁₆ 1

3214 3215 3216

T1 T3

985 493

4 381 2 193

985 493

4 381 2 193

985 4 381 493 2 193

860 3 825 430 1 913

572 2 544 287 1 277

430 1 913 215 956

286 1 272 144 641

...

1¹⁄₈ 1³⁄₁₆

3218 3219

T1 T3

1545 773

6 870 3 438

1545 773

6 870 3 438

1400 6 230 700 3 114

1050 4 670 526 2 340

701 3 118 350 1 557

527 2 344 262 1 165

350 1 557 175 778

1.22

1¹⁄₄ 1⁵⁄₁₆ 1³⁄₈ 1⁷⁄₁₆

3220 3221 3222 3223

T1 T3

2110 1055

9 390 4 690

2110 1055

9 390 4 690

1720 7 650 860 3 825

1295 5 760 646 2 874

862 3 834 430 1 913

650 2 891 323 1 437

433 1 926 215 956

1.42

1¹⁄₂

3224

T1 T3

3190 14 900 1595 7 100

3190 14 190 1595 7 100

2160 9 610 1080 4 800

1630 7 250 812 3 612

1090 4 850 543 2 415

815 3 625 406 1 806

545 2 424 272 1 210

1.54

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

3226 3227 3228

T1 T3

3450 15 350 1725 7 670

3240 14 410 1620 7 210

2160 9 610 1080 4 800

1620 7 210 812 3 612

1090 4 850 543 2 415

815 3 625 406 1 806

545 2 424 272 1 210

1.42

1¹⁵⁄₁₆

3231

T1 T3

4360 19 390 2180 9 700

3440 15 300 1720 7 650

2340 10 410 1170 5 200

1720 7 650 860 3 825

1150 5 120 575 2 558

860 3 825 430 1 913

575 2 558 288 1 281

1.39

2 2¹⁄₈ 2³⁄₁₆

3232 3234 3235

T1 T3

4750 21 130 2375 10 560

3620 16 100 1810 8 050

2420 10 760 1210 5 380

1810 8 050 908 4 039

1210 5 380 606 2 696

910 4 048 454 2 019

608 2 705 303 1 348

1.47

2¹⁄₄ 2⁷⁄₁₆

3236 3239

T1 T3

6050 26 910 3025 13 460

4110 18 280 2052 9 130

2750 12 200 1375 6 120

2050 9 120 1026 4 560

1370 6 090 1030 4 580 686 3 051 513 2 282

687 3 056 343 1 526

1.45

2¹⁄₂ 2¹¹⁄₁₆

3240 3243

T1 T3

7500 33 360 3750 16 680

4590 20 420 2290 10 190

3050 13 570 1530 6 810

2290 10 190 1145 5 090

1530 6 810 1145 5 090 764 3 398 573 2 549

765 3 403 382 1 699

1.51

2³⁄₄ 2¹⁵⁄₁₆

3244 3247

T1 T3

9120 40 570 4560 20 280

5070 22 550 2532 11 260

3380 15 030 1690 7 510

2530 11 250 1266 5 630

1685 7 500 1265 5 630 845 3 759 633 2 816

844 3 754 423 1 882

1.61

3⁷⁄₁₆

3255

T1 T3

11500 51 150 5710 25 410

5720 25 440 2860 12 720

3820 16 990 1910 8 500

2880 12 810 1440 6 410

1925 8 560 1440 6 410 963 4 284 720 3 203

965 4 293 483 2 148

1.31

3¹⁵⁄₁₆

3263

T1 T3

15000 66 720 7520 33 450

7500 33 360 3750 16 680

5000 22 240 2500 11 120

3730 16 590 1865 8 300

2500 11 120 1870 8 320 1248 5 550 1250 5 560 935 4 159 625 2 780

...

L For speeds slower than 10 RPM or for oscillating shafts, consult Link-Belt Bearing Division, Rexnord Corp.

I-23

Radial load ratings for 400 to 2500 RPM (pounds/newtons)L Shaft diameter inches

Basic Type bearing bearing number material

Shaft speed RPM 400

500

750

1000

1500

2000

2500

Short bearing factor

⁵⁄₈ ¹¹⁄₁₆

3210 3211

T1 T3

180 90

801 400

144 72

641 320

96 48

427 214

71 36

316 160

48 24

214 107

36 24

160 80

29 15

129 67

....

³⁄₄

3212

T1 T3

238 120

1 059 534

191 92

850 409

128 63

569 280

96 48

427 214

64 32

285 142

48 24

214 107

38 19

169 84

1.25

⁷⁄₈ ¹⁵⁄₁₆ 1

3214 3215 3216

T1 T3

215 108

956 480

175 86

778 383

114 57

507 254

86 43

383 191

57 29

254 129

43 22

191 98

34 ..

151 ...

....

1¹⁄₈ 1³⁄₁₆

3218 3219

T1 T3

263 131

1 170 583

211 105

939 467

140 70

623 311

105 53

467 236

70 35

311 156

53 ..

236 ...

42 ..

187 ...

1.22

1¹⁄₄ 1⁵⁄₁₆ 1³⁄₈ 1⁷⁄₁₆

3220 3221 3222 3223

T1 T3

322 162

1 432 721

258 130

1 148 578

172 86

765 383

130 65

578 289

86 43

383 191

65 ..

289 ...

52 ..

231 ...

1.42

1¹⁄₂

3224

T1 T3

408 203

1 815 903

325 162

1 446 721

216 109

961 485

163 81

725 360

109 ...

485 ...

82 ..

365 ...

65 ..

289 ...

1.54

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

3226 3227 3228

T1 T3

408 203

1 815 903

325 162

1 446 721

216 109

961 485

162 81

721 360

109 ...

485 ...

82 ..

365 ...

1¹⁵⁄₁₆

3231

T1 T3

431 215

1 917 956

344 172

1 530 765

234 115

1 041 512

172 ...

765 ....

115 ...

512 ...

1.39

2 2¹⁄₈ 2³⁄₁₆

3232 3234 3235

T1 T3

455 227

2 024 1 010

363 182

1 615 810

242 121

1 076 538

181 ...

805 ....

125 ...

556 ...

1.47

2¹⁄₄ 2⁷⁄₁₆

3236 3239

T1 T3

515 257

2 291 1 143

413 205

1 837 912

275 137

1 223 609

205 ...

912 ....

137 ...

609 ...

1.45

2¹⁄₂ 2¹¹⁄₁₆

3240 3243

T1 T3

574 287

2 553 1 277

460 229

2 046 1 019

305 153

1 357 681

229 ...

1 019 ....

1.51

2³⁄₄ 2¹⁵⁄₁₆

3244 3247

T1 T3

635 317

2 825 1 410

507 253

2 255 1 125

338 ...

1 503 ....

253 ...

1 125 ....

1.61

3⁷⁄₁₆

3255

T1 T3

725 363

3 225 1 615

580 290

2 580 1 290

382 ...

1 699 ....

290 ...

1 390 ....

1.31

3¹⁵⁄₁₆

3263

T1 T3

936 468

4 164 2 082

750 ...

3 336 ....

500 ...

2 224 ....

1.42

....

L Load ratings are based on industry standards established by the Mechanical Power Transmission Association.

I- 24

Flex-block® Sleeve Bearing Pillow Block

3200P Cast Iron Housing 2-bolt Base Alignable T1 Sintered Bronze Bearing T3 Carbon Graphite Bearing

Dimensions (inches/mm) Pillow block number g Shaft diameter inches

Basic pillow bearing number

A

B

C

D

E

F Bolts

H

L

S

U

⁵⁄₈ ¹¹⁄₁₆

3210P 3211P

T1 T1

T3 T3

1³⁄₁₆ 30.16

3¹⁄₂ 88.9

4⁵⁄₈ 117.5

¹⁵⁄₁₆ 23.8

1¹⁄₂ 38.1

³⁄₈ 10

¹⁄₂ 12.7

2¹¹⁄₃₂ 59.5

1¹⁄₈ 28.6

³⁄₄ 19.0

¹⁵⁄₃₂ 11.9

1¹³⁄₆₄ 30.6

1.3 1.2

³⁄₄

3212P

T1

T3

1⁵⁄₁₆ 33.34

3⁷⁄₈ 98.4

5¹⁄₈ 130.2

1¹⁄₄ 31.8

1¹⁄₂ 38.1

³⁄₈ 10

¹⁄₂ 12.7

2¹⁹⁄₃₂ 65.9

1³⁄₁₆ 30.2

¹¹⁄₁₆ 17.5

⁵⁄₈ 15.9

1¹⁹⁄₆₄ 32.9

1.8

⁷⁄₈ ¹⁵⁄₁₆ 1

3214P 3215P 3216P

T1 T1 T1

T3 T3 T3

1⁷⁄₁₆ 36.51

4 101.6

5³⁄₈ 136.5

1¹⁄₈ 28.6

1⁵⁄₈ 41.3

³⁄₈ 10

⁹⁄₁₆ 14.3

2⁷⁄₈ 73.0

1⁹⁄₁₆ 39.7

¹¹⁄₁₆ 17.5

⁹⁄₁₆ 14.3

1⁹⁄₃₂ 32.5

2.1 2.0 1.9

1¹⁄₈ 1³⁄₁₆

3218P 3219P

T1 T1

T3 T3

1¹¹⁄₁₆ 42.86

4⁵⁄₈ 117.5

6⁵⁄₁₆ 160.3

1³⁄₈ 34.9

1³⁄₄ 44.4

¹⁄₂ 12

¹¹⁄₁₆ 17.5

3⁵⁄₁₆ 84.1

1⁷⁄₈ 47.6

¹⁵⁄₁₆ 23.8

¹¹⁄₁₆ 17.5

1²⁹⁄₆₄ 36.9

2.8 2.7

1¹⁄₄ 1¹⁵⁄₁₆ 1³⁄₈ 1⁷⁄₁₆

3220P 3221P 3222P 3223P

T1 T1 T1 T1

T3 T3 T3 T3

1⁷⁄₈ 47.62

4¹⁵⁄₁₆ 125.4

6³⁄₈ 161.9

1¹¹⁄₁₆ 42.9

1⁷⁄₈ 47.6

¹⁄₂ 12

¹³⁄₁₆ 20.6

3¹¹⁄₁₆ 93.7

2¹⁄₈ 54.0

¹³⁄₁₆ 20.6

²⁷⁄₃₂ 21.4

1³⁵⁄₆₄ 39.3

4.5 4.4 4.3 4.1

1¹⁄₂

3224P

T1

T3

2 50.80

5³⁄₈ 136.5

7¹⁄₁₆ 179.4

2¹⁄₈ 54.0

1⁷⁄₈ 47.6

¹⁄₂ 12

¹³⁄₁₆ 20.6

4 2¹⁄₈ 101.6 54.0

¹⁵⁄₁₆ 23.8

1¹⁄₁₆ 27.0

1⁴¹⁄₆₄ 41.7

5.3

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

3226P 3227P 3228P

T1 T1 T1

T3 T3 T3

2¹⁄₈ 53.98

5⁵⁄₈ 142.9

7¹⁄₄ 184.2

2¹⁄₈ 54.0

2 50.8

¹⁄₂ 12

¹³⁄₁₆ 20.6

4⁵⁄₁₆ 2⁷⁄₁₆ 109.5 61.9

⁷⁄₈ 22.2

1¹⁄₁₆ 27.0

1²¹⁄₃₂ 42.1

6.4 6.3 6.1

1¹⁵⁄₁₆

3231P

T1

T3

2¹⁄₄ 57.15

6³⁄₁₆ 157.2

7⁷⁄₈ 200.0

2¹⁄₄ 57.2

2¹⁄₈ 54.0

⁵⁄₈ 16

⁷⁄₈ 22.2

4¹⁄₂ 114.3

2⁹⁄₁₆ 65.1

¹⁵⁄₁₆ 23.8

1¹⁄₈ 28.6

1²⁵⁄₃₂ 45.2

7.2

2 2¹⁄₈ 2³⁄₁₆

3232P 3234P 3235P

T1 T1 T1

T3 T3 T3

2¹⁄₂ 63.50

6³⁄₄ 171.4

9¹⁄₁₆ 230.2

2³⁄₈ 60.3

2³⁄₈ 60.3

⁵⁄₈ 16

1 25.4

5 2⁷⁄₈ 127.0 73.0

1⁵⁄₁₆ 33.3

1³⁄₁₆ 30.2

2¹⁄₆₄ 51.2

9.2 9.0 8.8

2¹⁄₄ 2⁷⁄₁₆

3236P 3239P

T1 T1

T3 T3

2¹¹⁄₁₆ 68.26

7¹⁄₂ 190.5

9¹⁄₂ 241.3

2¹¹⁄₁₆ 68.3

2¹⁄₂ 63.5

⁵⁄₈ 16

1¹⁄₈ 28.6

5⁷⁄₁₆ 3¹⁄₄ 138.2 82.6

1¹⁄₁₆ 27.0

1¹¹⁄₃₂ 34.1

2⁷⁄₆₄ 53.6

13.4 13.2

2¹⁄₂ 2¹¹⁄₁₆

3240P 3243P

T1 T1

T3 T3

3 76.20

8¹⁄₈ 206.4

10¹⁄₂ 266.7

3 76.2

2⁷⁄₈ 73.0

³⁄₄ 20

1⁵⁄₁₆ 33.3

6 3⁹⁄₁₆ 152.4 90.5

1³⁄₁₆ 30.2

1¹⁄₂ 38.1

2¹⁄₁₆ 52.4

17.1 16.5

2³⁄₄ 2¹⁵⁄₁₆

3244P 3247P

T1 T1

T3 T3

3¹⁄₄ 82.55

8⁷⁄₈ 225.4

11³⁄₄ 298.4

3⁵⁄₁₆ 84.1

3¹⁄₄ 82.6

³⁄₄ 20

1³⁄₈ 34.9

6¹⁄₂ 3³⁄₄ 165.1 95.2

1⁵⁄₁₆ 33.3

1²¹⁄₃₂ 42.1

2⁷⁄₃₂ 56.4

22.5 21.9

3⁷⁄₁₆

3255P

T1

T3

3³⁄₄ 95.25

10 254.0

13 330.2

3³⁄₄ 95.2

3¹⁄₂ 88.9

⁷⁄₈ 24

1⁵⁄₈ 41.3

7⁷⁄₈ 4⁷⁄₁₆ 188.9 112.7

1⁵⁄₈ 41.3

1⁷⁄₈ 47.6

2¹⁄₂ 63.5

32.5

3¹⁵⁄₁₆

3263P

T1

T3

4⁷⁄₁₆ 112.71

11⁷⁄₈ 301.6

15¹⁄₄ 387.4

4¹⁵⁄₁₆ 125.4

4³⁄₈ 111.1

⁷⁄₈ 24

1¹³⁄₁₆ 46.0

8¹⁵⁄₁₆ 4⁷⁄₈ 227.0 123.8

1⁷⁄₈ 47.6

2¹⁵⁄₃₂ 62.7

3¹⁄₆₄ 76.6

59.7

Bearing sleeve suffix

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement insert number, omit housing suffix designation; i.e., 3210T1. g Order by number, as: 3212PT1. ‡ Width dimension for closed end unit. Selection guide, pages I-21, I-22. Load ratings, pages I-23, I-24. Additional information, page I-22.

I-25

M

W ‡

Unit wt. (lbs.)

Flex-block® Sleeve Bearing Flanged Units

3200FX Cast Iron Housing 2-bolt Mounting Alignable T1 Sintered Bronze Bearing T3 Carbon Graphite Bearing

Dimensions (inches/mm) Flanged unit number g Shaft Basic diameter flange Bearing sleeve suffix inches number

A

C

D

Reg.

Short

F Bolts

G

H

J ‡

L

M

N

P

U

Unit wt. (lbs.)

⁵⁄₈ ¹¹⁄₁₆

3210FX 3211FX

T1 T1

T3 T3

2¹⁄₈ 54.0

3 76.2

¹⁵⁄₁₆ 23.8

.... ....

³⁄₈ 10

¹⁷⁄₆₄ 6.8

¹⁄₂ 12.7

1²⁵⁄₃₂ 45.2

1⁷⁄₆₄ 28.2

1¹⁄₈ 28.6

3⁷⁄₈ 98.4

⁷⁄₆₄ 2.8

.... ....

1.0 .9

³⁄₄

3212FX

T1

T3

2⁷⁄₁₆ 61.9

3¹⁷⁄₃₂ 89.7

1¹⁄₄ 31.8

1¹⁄₈ 28.6

³⁄₈ 10

¹⁄₄ 6.4

⁹⁄₁₆ 14.3

2¹⁄₆₄ 51.2

1²³⁄₆₄ 34.5

1³⁄₁₆ 30.2

4¹³⁄₃₂ 111.9

⁵⁄₃₂ 4.0

.... ....

1.2

⁷⁄₈ ¹⁵⁄₁₆ 1

3214FX 3215FX 3216FX

T1 T1 T1

T3 T3 T3

2¹¹⁄₁₆ 68.3

3⁵⁷⁄₆₄ 98.8

1¹⁄₈ 28.6

.... ....

⁷⁄₁₆ 10

³⁄₁₆ 4.8

¹⁹⁄₃₂ 15.1

2 50.8

1⁵⁄₁₆ 33.3

1⁹⁄₁₆ 39.7

4²⁹⁄₃₂ 124.6

¹⁄₁₆ 1.6

.... ....

1.7 1.6 1.5

1¹⁄₈ 1³⁄₁₆

3218FX 3219FX

T1 T1

T3 T3

3³⁄₁₆ 81.0

4¹⁹⁄₃₂ 116.7

1³⁄₈ 34.9

1¹⁄₄ 31.8

⁷⁄₁₆ 10

⁷⁄₃₂ 5.6

¹⁹⁄₃₂ 15.1

2¹⁵⁄₆₄ 56.7

1¹⁵⁄₃₂ 37.3

1⁷⁄₈ 47.6

5¹⁹⁄₃₂ 142.1

⁵⁄₃₂ 4.0

.... ....

2.5 2.3

1¹⁄₄ 1⁵⁄₁₆ 1³⁄₈ 1⁷⁄₁₆

3220FX 3221FX 3222FX 3223FX

T1 T1 T1 T1

T3 T3 T3 T3

3⁵⁄₈ 92.1

5¹⁄₈ 130.2

1¹¹⁄₁₆ 1¹⁄₂ 42.9 38.1

¹⁄₂ 12

⁵⁄₃₂ 4.0

⁵⁄₈ 15.9

2²³⁄₆₄ 59.9

1²¹⁄₃₂ 42.1

2¹⁄₈ 54.0

6¹⁄₈ 155.6

¹⁄₄ 6.4

¹⁄₃₂ 0.8

3.7 3.6 3.5 3.3

1¹⁄₂

3224FX

T1

T3

4 101.6

5²¹⁄₃₂ 143.7

2¹⁄₈ 54.0

1³⁄₄ 44.4

¹⁄₂ 12

⁵⁄₃₂ 4.0

⁵⁄₈ 15.9

2³⁵⁄₆₄ 64.7

1³¹⁄₃₂ 50.0

2¹⁄₈ 54.0

6²⁵⁄₃₂ 172.2

²⁵⁄₆₄ 9.9

⁵⁄₃₂ 4.0

4.9

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

3226FX 3227FX 3228FX

T1 T1 T1

T3 T3 T3

4¹⁄₄ 108.0

5²⁷⁄₃₂ 148.4

2¹⁄₈ 54.0

1¹³⁄₁₆ 46.0

¹⁄₂ 12

⁵⁄₃₂ 4.0

⁵⁄₈ 15.9

2⁹⁄₁₆ 65.1

1³¹⁄₃₂ 50.0

2⁷⁄₁₆ 61.9

7³⁄₃₂ 180.2

³⁄₈ 9.5

⁵⁄₃₂ 4.0

6.2 6.0 5.9

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement insert number, omit housing suffix designation; i.e., 3210T1. g Order by number, as: 3216FXT3. For short sleeves add suffix S; i.e., 3220FXT1S. ‡ Width dimension for closed end unit. Selection guide, pages I-21, I-22. Load ratings, pages I-23, I-24. Additional information, page I-22.

I-26

Flex-block® Sleeve Bearing Flanged Units

3200F Cast Iron Housing 4-bolt Mounting Alignable T1 Sintered Bronze Bearing T3 Carbon Graphite Bearing

Dimensions (inches/mm) Flanged unit number g Shaft diameter inches

Basic flange number

F Bolts

G

H

J ‡

L

M

N

Reg.

Short

⁵⁄₈ ¹¹⁄₁₆

3210F 3211F

T1 T1

T3 T3

2¹⁄₈ 54.0

2¹⁄₈ 54.0

¹⁵⁄₁₆ 23.8

.... ....

3 76.2

³⁄₈ 10

¹⁷⁄₆₄ 6.8

¹⁄₂ 12.7

1²⁵⁄₃₂ 45.2

1⁷⁄₆₄ 28.2

1¹⁄₈ 28.6

³⁄₄

3212F

T1

T3

2⁷⁄₁₆ 61.9

2¹⁄₂ 63.5

1¹⁄₄ 31.8

1¹⁄₈ 28.6

3³⁄₈ 85.7

³⁄₈ 10

¹⁄₄ 6.4

⁹⁄₁₆ 14.3

2¹⁄₆₄ 51.2

1²³⁄₆₄ 34.5

⁷⁄₈ ¹⁵⁄₁₆ 1

3214F 3215F 3216F

T1 T1 T1

T3 T3 T3

2¹¹⁄₁₆ 68.3

2³⁄₄ 69.8

1¹⁄₈ 28.6

.... ....

3³⁄₄ 95.2

⁷⁄₁₆ 10

³⁄₁₆ 4.8

¹⁹⁄₃₂ 15.1

2 50.8

1¹⁄₈ 1³⁄₁₆

3218F 3219F

T1 T1

T3 T3

3³⁄₁₆ 81.0

3¹⁄₄ 82.6

1³⁄₈ 34.9

1¹⁄₄ 31.8

4¹⁄₄ 108.0

⁷⁄₁₆ 10

⁷⁄₃₂ 5.6

¹⁹⁄₃₂ 15.1

1¹⁄₄ 1⁵⁄₁₆ 1³⁄₈ 1⁷⁄₁₆

3220F 3221F 3222F 3223F

T1 T1 T1 T1

T3 T3 T3 T3

3⁵⁄₈ 92.1

3⁵⁄₈ 92.1

1¹¹⁄₁₆ 17.5

1¹⁄₂ 38.1

4⁵⁄₈ 117.5

¹⁄₂ 12

⁵⁄₃₂ 4.0

1¹⁄₂

3224F

T1

T3

4 101.6

4 101.6

2¹⁄₈ 54.0

1³⁄₄ 44.4

5¹⁄₈ 130.2

¹⁄₂ 12

1⁵⁄₈ 1¹¹⁄₁₆ 1³⁄₄

3226F 3227F 3228F

T1 T1 T1

T3 T3 T3

4¹⁄₄ 108.0

4¹⁄₈ 104.8

2¹⁄₈ 54.0

1¹³⁄₁₆ 46.0

5³⁄₈ 136.5

1¹⁵⁄₁₆

3231F

T1

T3

4¹⁄₂ 114.3

4³⁄₈ 111.1

2¹⁄₄ 57.2

1¹⁵⁄₁₆ 49.2

2 2¹⁄₈ 2³⁄₁₆

3232F 3234F 3235F

T1 T1 T1

T3 T3 T3

4¹⁵⁄₁₆ 125.4

5¹⁄₈ 130.2

2³⁄₈ 60.3

2¹⁄₄ 2⁷⁄₁₆

3236F 3239F

T1 T1

T3 T3

5³⁄₈ 136.5

5⁵⁄₈ 142.9

2¹⁄₂ 2¹¹⁄₁₆

3240F 3243F

T1 T1

T3 T3

5⁷⁄₈ 149.2

2³⁄₄ 2¹⁵⁄₁₆

3244F 3247F

T1 T1

T3 T3

3⁷⁄₁₆

3255F

T1

T3

Bearing sleeve suffix

A

B

D

E

P

U

Unit wt. (lbs.)

3⁷⁄₈ 98.4

⁷⁄₆₄ 2.8

... ...

1.2 1.1

1³⁄₁₆ 30.2

4¹³⁄₃₂ 111.9

⁵⁄₃₂ 4.0

... ...

1.5

1⁵⁄₁₆ 33.3

1⁹⁄₁₆ 39.7

4²⁹⁄₃₂ 124.6

¹⁄₁₆ 1.6

... ...

2.1 2.0 1.9

2¹⁵⁄₆₄ 56.7

1¹⁵⁄₃₂ 37.3

1⁷⁄₈ 47.6

5¹⁹⁄₃₂ 142.1

⁵⁄₃₂ 4.0

... ...

3.2 2.9

⁵⁄₈ 15.9

2²³⁄₆₄ 59.9

1²¹⁄₃₂ 42.1

2¹⁄₈ 54.0

6¹⁄₈ 155.6

¹⁄₄ 6.4

¹⁄₃₂ 0.8

4.5 4.4 4.3 4.1

⁵⁄₃₂ 4.0

⁵⁄₈ 15.9

2³⁵⁄₆₄ 64.7

1³¹⁄₃₂ 50.0

2¹⁄₈ 54.0

6²⁵⁄₃₂ 172.2

²⁵⁄₆₄ 9.9

⁵⁄₃₂ 4.0

5.6

¹⁄₂ 12

⁵⁄₃₂ 4.0

⁵⁄₈ 15.9

2⁹⁄₁₆ 65.1

1³¹⁄₃₂ 50.0

2⁷⁄₁₆ 61.9

7³⁄₃₂ 180.2

³⁄₈ 9.5

⁵⁄₃₂ 4.0

7.1 6.8 6.7

5⁵⁄₈ 142.9

¹⁄₂ 12

⁷⁄₃₂ 5.6

³⁄₄ 19.0

2¹³⁄₁₆ 71.4

2⁵⁄₃₂ 54.8

2⁹⁄₁₆ 65.1

7⁷⁄₁₆ 188.9

²⁷⁄₆₄ 10.7

³⁄₃₂ 2.4

7.8

2 50.8

6³⁄₈ 161.9

⁵⁄₈ 16

¹¹⁄₃₂ 8.7

²⁹⁄₃₂ 23.0

3¹¹⁄₆₄ 80.6

2¹¹⁄₃₂ 59.5

2⁷⁄₈ 73.0

8¹⁄₂ 215.9

¹³⁄₃₂ 10.3

¹⁄₃₂ 0.8

10.0 9.8 9.5

2¹¹⁄₁₆ 68.3

2¹⁄₄ 57.2

6⁷⁄₈ 174.6

⁵⁄₈ 16

³⁄₈ 9.5

¹⁵⁄₁₆ 23.8

3²⁵⁄₆₄ 86.1

2⁵⁄₈ 66.7

3¹⁄₄ 82.6

9⁷⁄₃₂ 234.2

²⁷⁄₆₄ 10.7

¹⁄₁₆ 1.6

12.8 12.6

5⁷⁄₈ 149.2

3 76.2

2¹⁄₂ 63.5

7³⁄₈ 187.3

⁵⁄₈ 16

³⁄₃₂ 2.4

³⁄₄ 19.0

3⁵⁄₃₂ 80.2

2¹⁹⁄₃₂ 65.9

3⁹⁄₁₆ 90.5

9¹³⁄₁₆ 249.2

⁷⁄₁₆ 11.1

¹³⁄₃₂ 10.3

16.6 15.9

6³⁄₈ 161.9

6 152.4

3⁵⁄₁₆ 84.1

2¹¹⁄₁₆ 68.3

7³⁄₄ 196.8

³⁄₄ 20

¹⁄₈ 3.2

³⁄₄ 19.0

3³⁄₈ 85.7

2¹³⁄₁₆ 71.4

3³⁄₄ 95.2

10¹⁄₄ 260.4

¹⁷⁄₃₂ 13.5

¹⁄₂ 12.7

20.4 19.8

7¹⁄₂ 190.5

6³⁄₄ 171.4

3³⁄₄ 95.2

3⁵⁄₁₆ 84.1

8⁹⁄₁₆ 217.5

³⁄₄ 20

³⁄₃₂ 2.4

1 25.4

4¹⁄₃₂ 102.4

3¹³⁄₃₂ 86.5

4⁷⁄₁₆ 112.7

11³⁄₈ 288.9

¹⁄₂ 12.7

¹¹⁄₃₂ 8.7

29.5

Bold face items are normally available from stock; please consult for availability of non-stock items. For replacement insert number, omit housing suffix designation; i.e., 3210T1. g Order by number, as: 3216FT3. For short sleeves add suffix S; i.e., 3220FT1S. ‡ Width dimension for closed end unit. Selection guide, pages I-21, I-22. Load ratings, pages I-23, I-24. Additional information, page I-22.

I- 27

Universal Takeup Frames

LC Bolted Steel Frames 2 or 4-bolt Frame Mounting Bolt Centers Adjustable Pillow Block Units Not Included

Dimensions (inches/mm) Unit mounting bolt diameter (F) and max shaft Adjustment size (A) mm /inches

³⁄₈

10 bolts

30

1¹⁄₄

shaft

6 152.4 9 228.6 12 304.8

6 152.4 12 ¹⁄₂ 9 bolts 228.6 50 1¹⁵⁄₁₆ 12 shaft 304.8 18 457.2

⁵⁄₈

16 bolts

60 shaft

2⁷⁄₁₆

9 228.6 12 304.8 18 457.2 24 609.6

Takeup frame number

LC1-6 LC1-9 LC1-12 LC2-6 LC2-9 LC2-12 LC2-18 LC3-9 LC3-12 LC3-18 LC3-24

B

C

D

16 406.4 19 482.6 22 558.8

17 431.8 20 508.0 23 584.2

19¹⁄₈ 485.8 22¹⁄₈ 562.0 25¹⁄₈ 638.2 31¹⁄₈ 790.6

20¹⁄₄ 514.4 23¹⁄₄ 590.6 26¹⁄₄ 666.8 32¹⁄₄ 819.2

25⁵⁄₁₆ 642.9 28⁵⁄₁₆ 719.1 34⁵⁄₁₆ 871.5 40⁵⁄₁₆ 1023.9

26⁹⁄₁₆ 674.9 29⁹⁄₁₆ 750.9 3 35⁹⁄₁₆ 76.2 903.3 41⁹⁄₁₆ 1055.7

1³⁄₄ 44.4

2³⁄₈ 60.3

E

2⁵⁄₈ 66.7

3¹⁄₈ 79.4

F Bolts

³⁄₈ 10

¹⁄₂ 12

4 ⁵⁄₈ 101.6 16

G

H

K

L

R

1⁵⁄₈ ³⁄₁₆ 5 2¹⁄₈ 1³⁄₄ 41.3 4.8 127.0 54.0 44.4

2¹⁄₈ ¹⁄₄ 6⁹⁄₁₆ 2¹¹⁄₁₆ 2³⁄₁₆ 54.0 6.4 166.7 68.3 55.6

2³⁄₄ ⁵⁄₁₆ 8⁵⁄₃₂ 3⁵⁄₁₆ 2³⁄₄ 69.8 7.9 207.2 84.1 69.8

T Bolts

U

WL Bolt centers

V

Min

Max

Z

⁵⁄₁₆ 8

15¹⁄₄ 387.4 18¹⁄₄ 463.6 21¹⁄₄ 539.8

1¹⁄₁₆ 27

3 76.2

5 127.0

¹⁵⁄₁₆ 27.8

³⁄₈ 10

18¹⁄₈ 460.4 21¹⁄₈ 536.6 24¹⁄₈ 612.8 30¹⁄₈ 765.2

1¹¹⁄₃₂ 3³⁄₄ 34.1 95.2

7¹⁄₄ 184.2

1³⁄₃₂ 27.8

¹⁄₂ 12

24¹⁄₁₆ 611.2 27¹⁄₁₆ 687.4 1⁵⁄₈ 33¹⁄₁₆ 41.3 839.8 39¹⁄₁₆ 992.2

4¹⁄₄ 9 108.0 228.6

1¹³⁄₃₂ 35.7

Bold face items are normally available from stock; please consult for availability of non-stock items. L Max W dimension can be exceeded, but overall adjustment reduces proportionately. Use dimensions A, D, F, and W as limits for fitting and mounting Sleeve, Ball Bearing, and Roller Bearing pillow block units. For load ratings, see pillow block unit to be used.

I-28

Nomenclature

Rigid Sleeve Bearing and Flex-Block® Units Rigid Sleeve Bearing Units Symbol None 2— 2K 10 11 12 13 14 15 F22 DS28 DSB28

Description

15

95

F

Z–

32

16

F

T1

S

One-piece housing, cast iron Two-piece housing, cast iron Two-piece housing, cast steel Pillow block, one-piece, 2-bolt base Pillow block, plain iron (no sleeve) Pillow block, angle type split t, 2-bolt base Pillow block, angle type split t, 4-bolt base Pillow block, horizontal gibbed t, 4-bolt base Pillow block, angle type split t, 40° off horizontal Flanged unit, square, 4-bolt Takeup, conveyor, heavy rigid frame Takeup, conveyor, heavy hinged frame

95 F

Shaft diameter in 16ths of an inch 4-bolt base (units 1000, 1100 only)

None Z

Babbitt bearing (except units 1100) Bronze bearing

XX

2K

Takeup adjustment, inches

Flex-block Sleeve Bearing Units Symbol

Description

32 16

Standard duty series Shaft diameter in 16ths of an inch

F FX P

Flanged unit, 4-bolt Flanged unit, 2-bolt Pillow block

T1 T3 T4

Porous sintered bronze, oil impregnated, 200°F max. Self-lubricating carbon graphite, 700°F max. Plain bore (cast iron), 1000°F max.

None S C

Standard length Short sleeve, (F, FX units) Closed end unit


I- 29

C

Bearing Number Index Ball Bearings, Ball Bearing Units, Sleeve Bearings and Takeups

Corrosion Resistant KF-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KFX-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KP-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KLF-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KLFX-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KLP-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TSP00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TSPT00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TQP00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WF3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WPB3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WFX3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WP3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WPT3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WTH3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-13 B-13 B-14 B-13 B-13 B-14 B-57 B-57 B-58 B-18 B-19 B-17 B-15 B-16 B-20

Hex bores K200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-70 KB200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-70 Round bores R200E3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RB200E3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RG200E3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RBG200E3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-71 B-71 B-72 B-72

Square bores S200E3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SB200E3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SG200E3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SBG200E3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-73 B-73 B-74 B-74

Series U200 F-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-UG200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FR-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FR-UG200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FX-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FX-UG200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FXR-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FXR-UG200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U200NL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UB200NL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UBG200NL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UG200NL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-45 B-45 B-46 B-46 B-43 B-43 B-44 B-44 B-29 B-63 B-63 B-64 B-64

Series 3-U200 F3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FB3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FC3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FF200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FX3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HM3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NT3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PH3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PT3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TH3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TAS3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TDS3-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-37 B-32 B-41 B-62 B-33 B-61 B-59 B-21 B-31 B-25 B-30 B-51 B-53 B-55 B-56

Series 4-U200 FC4-U200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-41 Series 3-S200 F3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FB3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FX3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PT3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TH3-S200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SG200EL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-40 B-32 B-36 B-24 B-28 B-30 B-52 B-54 B-69

Series W200 F-W200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-WG200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FR-W200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FR-WG200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FX-W200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FX-WG200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FXR-W200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FXR-WG200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-W200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W200EL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WB200EL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WBG200EL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WG200EL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-45 B-45 B-46 B-46 B-43 B-43 B-44 B-44 B-29 B-67 B-67 B-68 B-68

J-1

Series 3-W200 F3-W200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FX3-W200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3-W200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL3-W200E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-39 B-35 B-23 B-27

Series Y200 F-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-YG200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FR-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FR-YG200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FX-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FX-YG200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FXR-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FXR-YG200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y200NL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . YB200NL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . YBG200NL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . YG200NL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-45 B-45 B-46 B-46 B-43 B-43 B-44 B-44 B-29 B-65 B-65 B-66 B-66

Series 3-Y200 F3-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FC3-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FX3-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PL3-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-38 B-42 B-34 B-22 B-26

Series 4-Y200 FC4-Y200N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-42 Series 300 C-U300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-13 CE-U300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-13 F-U300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-11 FC-U300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-12 FCE-U300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-12 FE-U300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-11 P-U300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-9 PE-U300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-9 P2-U300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-10 T-U300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-14 UG300L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-16

Sleeve Bearing Units and Takeups Series 1000 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-9 1000Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-9 Series 1100 1100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-10 Series 1200 2-1200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-11 2-1200Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-11 Series 1300 2-1300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-12 Series 1400 2-1400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-13 2-1400Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-13 2K1400Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-13 Series 1500 2-1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-14 2-1500Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-14 Series 2200 F2200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-15 F2200Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-15 Series 2800 DSB2800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-16 Series 3200 3200F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-27 3200FX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-26 3200P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-25 Formed Steel Housings GMSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GMSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSTR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B-49 B-49 B-47 B-47 B-50 B-48

Takeup Frames Series LC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-60, I-28 Series LHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-15 Series TP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-57

Bearing Number Index Spherical Roller Bearings, Cylindrical Roller Bearings and Takeups Series B22400 B22400HL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-26 C-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-15 CSE-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-16 DS-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-23 EFR-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-18 EP-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-11 EP-B22400FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-12 EPE-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-11 EPE-B22400FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-12 F-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-17 FB-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-19 FC-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-20 FE-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-17 P-B22400FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-10 P-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9 PE-B22400FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-10 PE-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9 PK-B22400FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-14 PK-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-13 PKE-B22400FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-14 PKE-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-13 PL-B22400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9 T-B22400H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-21 Series B22500 B22500HL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CSE-B22500H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DS-B22500H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DSH-B22500H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EF-B22500H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EP-B22500FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EP-B22500H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EPE-B22500FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EPE-B22500H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-B22500FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-B22500H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-B22500FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-B22500H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PK-B22500FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PKE-B22500FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D-40 D-39 D-23 D-38 D-37 D-36 D-36 D-36 D-36 D-35 D-35 D-35 D-35 D-14 D-14

Series B22600 B22600HL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CSE-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EF-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EP-B22600FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EP-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EPE-B22600FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EPE--B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FB-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FC-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FE-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-B22600FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-B22600FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PK-B22600FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PK-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PKE-B22600FH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PKE-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T-B22600H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D-61 D-55 D-57 D-52 D-51 D-52 D-51 D-56 D-58 D-59 D-56 D-50 D-49 D-50 D-49 D-54 D-53 D-54 D-53 D-60

Spherical Roller Bearing Pillow Blocks and Takeups Series 6600 P-LB6600FDB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-LB6600FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB6600FD8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB6600FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PK-LB6600FD8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PK-LB6600FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PKE-LB6600FD8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PKE-LB6600FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-18 E-16 E-18 E-16 E-20 E-19 E-20 E-19

Series 6800 DS-LB6800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-LB6800D8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-LB6800FD8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-LB6800FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-LB6800R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB6800D8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB6800FD8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB6800FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB6800R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PK-LB6800FD8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PK-LB6800FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PKE-LB6800FD8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PKE-LB6800FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-26 E-17 E-17 E-15 E-15 E-17 E-17 E-15 E-15 E-20 E-19 E-20 E-19

Series 6900 P-LB6900FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-LB6900R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB6900FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB6900R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-23 E-23 E-23 E-23

Series SAF22600 SAF22600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-23 Series 7600 P-LB7600FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB7600FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PK-LB7600FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PKE-LB7600FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-21 E-21 E-22 E-22

Series 7800 P-LB7800FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-LB7800R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB7800FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB7800R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PK-LB7800FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PKE-LB7800FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-21 E-21 E-21 E-21 E-22 E-22

Series 7900 P-LB7900FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-LB7900R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB7900FR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE-LB7900R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E-24 E-24 E-24 E-24

Series SAF22300 SAF22300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-24

Spherical Roller Bearings Series 22200 22200LB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-7 22200LBK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-7 Series 22300 22300LB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-9 22300LBK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-9 Series 23000 23000LB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-9 23000LBK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-9 Series A20000 A20000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-11 A20000M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-13 A20000S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-6

Cylindrical Roller Bearings M . . . . . . . EAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M . . . . . . . EX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M . . . . . . . TAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M . . . . . . . TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M . . . . . . . UAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M . . . . . . . UV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MA . . . . . . EAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MA . . . . . . EX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MA . . . . . . TAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MA . . . . . . TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MA . . . . . . UAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MA . . . . . . UV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MR . . . . . EAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MR . . . . . EX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MR . . . . . TAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MR . . . . . TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MR . . . . . UAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MR . . . . . UV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSN . . . . EAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSN . . . . EX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . CAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . CX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . DAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . DX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . SNAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . SNX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . TAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . TM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . UAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . UM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . UV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MU . . . . . X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MA6200TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NE-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-15 G-23 G-33

Accessories Adapter Assemblies SNW00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-8 SNW100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-10 SNP3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-10 Takeup Frames Series LC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-60, I-28 Series LHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-22, E-25

J-2

WORLDWIDE SERVICE LOCATIONS INTERNATIONAL AUSTRALIA Rexnord Australia Pty Ltd 25 Henry Street Picton, N.S.W. 2571 Australia Telephone: 61-2-4677-3811 Fax: 61-2-4677-3812 BRAZIL Rexnord Correntes Ltda. Rua Christopher Levalley, 187 93032-430 Sao Leopoldo - RS Brazil Telephone: 55-51-579-8022 Fax: 55-51-579-8029 CANADA Rexnord Canada Ltd 81 Maybrook Dr Scarborough, Ontario M1V 3Z2 Telephone: 416-297-6868 Fax: 416-297-6873

UNITED STATES

LATIN AMERICA Rexnord International Inc 4695 W Greenfield Ave Milwaukee WI 53214 USA Telephone: 414-643-2242 Fax: 414-643-3666 MEXICO Cadenas y Componentes Rexnord SA de CV Privada de los Industriales 115 Cd Industrial Benito Juarez Zona Jurica 76100 Queretaro Qro Telephone: 52-42-18-50-00 Fax: 52-42-18-10-90 SINGAPORE Rexnord International Inc. 36 Purvis Street Talib Center #02-01/04 Singapore 188613 Telephone: 65-338-5622 Fax: 65-338-5422

CHINA Rexnord China Conch Building, Ste 621 1271 Zhongshan Xi Rd Shanghai, China 200051 Telephone: 86-21-62701942 Fax: 86-21-62701943

ATLANTA 2300 Lake Park Drive – #150 Smyrna, GA 30080 Telephone: 770-431-7200 Fax: 770-431-7299 COLUMBUS 3655 Brookham Drive Suite J Grove City, OH 43123 Telephone: 614-675-1800 Fax: 614-675-1898 DALLAS 1217 Corporate Drive West Arlington, TX 76006 Telephone: 817-640-3332 Fax: 817-640-8704 FRESNO 1080 W. Sierra Avenue Suite 102 Fresno, CA 93711 Telephone: 559-435-1111 Fax: 559-439-6887

EUROPE Rexnord Belgium NV Airport Circle Center Maalbeekweg 17 1930 Zaventem Belgium Telephone: 32-2-725-4060 Fax: 32-2-720-1023

Rexnord Corporation Link-Belt Bea ring Division 7601 Rockville Rd. India na polis, IN 46214 Phone: 317/273-5500 FAX: 317/273-5620 http://www.rexnord.com Bulletin No. 3000

©2000 Rexnord Corporation

4/01 20M HG Printed in U.S.A

Catalogo Chumaceras Link Belt 3v5z2s

Overview 1s532p

More details 6h715l

Related Documents 2w1qw

Catalogo Chumaceras Link Belt 3v5z2s

Link Belt - Catalogo 1000.pdf 1k2i10

Link Belt Service Manual 5v3s36

Cadenas Link Belt 5n4t7

Link Belt 130x4 1 72206b

Roller Chain Link Belt 3p645

More Documents from "Hejage Kecuca Decuca" 4y734

Catalogo Chumaceras Link Belt 3v5z2s

Listado Cooperativas Con Autorizacion Desmonte De Actividad Financiera Junio-2013 cs4g