742226v01 434f4w

4-Port Antenna Frequency Range Dual Polarization HPBW Fixed Electr. DT

R1

B1

790–960 1710–2170 X

X

65°

60°

0°

0°

4-Port Antenna 790–960/1710–2170 65°/60° 12/14dBi 0°/0°T

742226V01

Type No. Lowband Frequency range Polarization Gain Horizontal Pattern: Half-power beam width Front-to-back ratio (180°±30°) Cross polar ratio Maindirection 0° Sector ±60° Tracking, Avg. Squint Vertical Pattern: Half-power beam width Electrical tilt

MHz ° dBi

dB dB

790 – 862 +45, –45 2 x 11.1 68 Copolar: Total power:

Ω dB dB dBc W

67 Copolar: Total power:

> 23 > 20

65 Copolar: Total power:

Typically: 25 > 10

Typically: 25 > 10 1.0 ±3.0

Typically: 25 > 10

34

33 0, fixed

30

dB ° ° °

> 23 > 20

880 – 960 +45, –45 2 x 11.8

> 25 > 22

50 < 1.5 > 30 > 42 (790 – 960 // 1710 – 2170 MHz) < –150 (2 x 43 dBm carrier) 250 (at 50 °C ambient temperature)

936.3967/f

Subject to alteration.

Impedance VSWR Isolation: Intrasystem Isolation: Intersystem Intermodulation IM3 Max. power per input

R1 790 – 960 824 – 894 +45, –45 2 x 11.4

All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]

742226V01 Page 1 of 3

4-Port Antenna

Highband Frequency range Polarization Gain Horizontal Pattern: Half-power beam width Front-to-back ratio (180°±30°) Cross polar ratio Maindirection 0° Sector ±60° Tracking, Avg. Squint Vertical Pattern: Half-power beam width Electrical tilt Impedance VSWR Isolation: Intrasystem Isolation: Intersystem Intermodulation IM3 Max. power per input

B1 MHz ° dBi ° dB dB

1710 – 1880 +45, –45 2 x 12.8 66 Copolar: Total power:

Ω dB dB dBc W

> 25 > 22

60 Copolar: Total power:

1920 – 2170 +45, –45 2 x 13.6

> 25 > 22

60 Copolar: Total power:

Typically: 16 > 10

Typically: 18 > 10 0.5 ±1.5

Typically: 20 > 10

20

18 0, fixed

17.5

dB ° ° °

1710 – 2170 1850 – 1990 +45, –45 2 x 13.3

> 25 > 22

50 < 1.5 > 30 > 42 (790– 960 // 1710 – 2170 MHz) < –150 (2 x 43 dBm carrier) 200 (at 50 °C ambient temperature)

4 x 7-16 female Bottom or top Frontal: 125 | 28 Maximal: 135 | 30 200 124 579 / 262 / 139 22.8 / 10.3 / 5.5 M (Medium) 7.5 / 9.5 (clamps incl.) 16.5 / 20.9 (clamps incl.) 756 x 282 x 172 29.8 x 11.1 x 6.8 and 2 units of clamps for 42 – 115 mm | 1.7– 4.5 inches diameter

* Inverted mounting: Connector position top: Change drain hole screw.

Page 2 of 3 742226V01

All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]

936.3967/f

Input Connector position Wind load (at Rated N | lbf Wind Speed: 150 km/h) Max. wind velocity km/h mph Height/width/depth mm inches Category of mounting hardware Weight kg lb Packing size mm inches Scope of supply

Subject to alteration.

Mechanical specifications

Accessories General Information Accessories (order separately if required) Description

Remarks mm / inches

Weight approx. Units per kg | lb antenna

731651 85010002 85010003 737978

1 clamp 1 clamp 1 clamp 1 downtilt kit

Mast diameter: 28 – 60 | 1.1 – 2.4 Mast diameter: 110 – 220 | 4.3 – 8.7 Mast diameter: 210 – 380 | 8.3 – 15.0 Downtilt angle: 0° – 20°

0.8 | 1.8 2.7 | 6.0 4.8 | 10.6 2.3 | 5.1

2 2 2 1

1.1 | 2.4

2

1)

Type No.

2) 3)

1) ’ 9 | 0.4 2) 72 | 2.8 3) 64 | 2.5

1 clamp

Mast diameter: 42 – 115 | 1.7 – 4.5

For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Material:

Reflector screen: Weather-proof aluminum. Fiberglass housing: It covers totally the internal antenna components. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The color of the radome is light grey. All screws and nuts: Stainless steel.

Grounding:

The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded.

630 | 24.8 670 | 26.4

738546

579 | 22.8

Accessories (included in the scope of supply)

All dimensions in mm | inches

Correlation Table Frequency range

Array

Connector

790 – 960 MHz 1710 – 2170 MHz

R1 B1

1–2 3–4

B1 R1

58 | 2.3

Layout of interface:

52 | 2.0

139 | 5.5

1710 –2170 +45°

790 – 960 –45°

790 – 960 +45°

936.3967/f

Subject to alteration.

1710 –2170 –45°

262 | 10.3 Bottom view All dimensions in mm | inches All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]

742226V01 Page 3 of 3

Mounting Hardware Clamp Included in the Scope of Supply

Suitable for mast diameter

(mm) [inches] (mm) [inches]

Antenna – mast distance Material of clamp and screws Weight

(kg) [lb]

42 – 115 [1.65 – 4.53] 20 – 25 [0.79 – 0.98] Hot-dip galvanized steel / stainless steel 1.1 [2.43]

100 [3.94]

40 [1.57]

40 [1.57]

72 [2.83]

20–25 [0.79–0.98]

152 [5.98]

15 2–1 ’ 4 4.53] 5– [1.6

M10 ‰MA = 25 Nm

35 [1.38]

M8 ‰MA = 20 Nm

64 [2.52] 125 [4.92]

936.3920/c

Subject to alteration.

20–25 [0.79–0.98]

Please note: Kathrein does not recommend to use counter nuts. The additional nuts supplied are only meant as spares. All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]

All dimensions in mm and [inches]

738546 Page 1 of 1