05 Dt Analysis - How To Analyze Quality Issue By Dt 1g2b4b
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 445h4w
Overview 1s532p
& View 05 Dt Analysis - How To Analyze Quality Issue By Dt as PDF for free.
More details 6h715l
- Words: 754
- Pages: 13
Security Level:
2008-11-3
How to Analyze Quality Issue by DT www.huawei.com
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Outline • Downlink RxQuality Issue
What is RxQuality Issue
The problems raised by RxQuality issue
• How to detect quality issue by DT
Bad Quality due to Signal Strength – FER is Bad
Bad Quality due to Signal Strength – FER is OK
Bad Quality due to C/A Interference
Bad Quality due to Time Dispersion
• The solution to RxQuality issue
What is RxQuality Issue
Bad RxQuality is one of the biggest problems in a Network. The RxQuality that a network operator can offer to customers mostly depends on the RxLevel and the interference of the network.
There are two types of RxQuality problems, uplink RxQuality and downlink RxQuality. We can only detect downlink RxQuality problem by DT, however, if the downlink RxQuality is bad in one cell, there is a risk that there would be problems on the uplink as well.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 3
What is RxQuality Issue
Good RxQualit y
Bad RxQualit y
RxQuality is divided into eight levels which are from 0 to 7, the level 0 is the best and the level 7 is the worst.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 4
The problems raised by RxQuality issue
Bad RxQuality may raise many problems, such as:
Difficulty in accessing the network
Dropped calls due to bad quality
Poor handover success rate
Low MOS value
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 5
Bad Quality due to Signal Strength – FER is Bad As the signal strength drops down, the quality of the call becomes worse being effected by interference and/ or fading. Consequently the system becomes weaker to handle the interference. Drop calls and ping pong handovers usually happen in such environments. RxLev (Serving Cell and Neighbors) is not high enough (about less than -95dbm). Maybe there are interferences in this region for bad FER.
Bad RxLev Bad RxQual Bad FER
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 6
Bad Quality due to Signal Strength – FER is OK This case is similar with the previous except for FER. Signal strength is also bad in this, but FER is still fine. FER is ok, it means that there is no obvious interference in the area. The coverage is usually the problem in this situation.
Bad RxLev Bad RxQual Fine FER
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 7
Bad Quality due to C/A Interference There is adjacent channel interference in this case and the RxQuality is not good. Bad Quality due to Adjacent Interference. Adjacent BCCH between best server and best neighbor.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 8
Bad Quality due to Time Dispersion
Site Reflecting object
MS Time dispersion is caused by the reflections. The MS uses all or most of the received power, instead of only the direct signal, there is a larger probability to decode the information. So the RxQuality will be very bad perhaps.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 9
Bad Quality due to Time Dispersion The MS is near the cell, it is less than 1 mile far away. The RxQuality is very bad for the bad C/R, in which, R stands for reflected signal and C stands for original signal. The TA is too high. It is because that TA stands for the reflected signal but the original signal.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 10
The solution to RxQuality issue (1) RxQuality Issue
Solution Find out the interference source or /and
Bad Quality due to Signal Strength – FER is Bad
adjust the azimuth or downtilt of the antenna or /and adjust the power of the transmitter(s). There is no obvious interference in this
Bad Quality due to Signal Strength – FER is OK
situation. Adjust the azimuth or downtilt of the antenna or /and adjust the power of the transmitter(s).
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 11
The solution to RxQuality issue (2) RxQuality Issue
Solution
Bad Quality due to C/A Interference
Avoided adjacent frequencies in the same cell and preferably in neighboring cells as well.
Move the site to be placed near the reflecting Bad Quality due to Time Dispersion object to prevent time dispersion. Another efficient solution is to modify the antenna arrangement, either in azimuth (horizontally) or by tilt (vertically).
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 12
Thank you www.huawei.com
2008-11-3
How to Analyze Quality Issue by DT www.huawei.com
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Outline • Downlink RxQuality Issue
What is RxQuality Issue
The problems raised by RxQuality issue
• How to detect quality issue by DT
Bad Quality due to Signal Strength – FER is Bad
Bad Quality due to Signal Strength – FER is OK
Bad Quality due to C/A Interference
Bad Quality due to Time Dispersion
• The solution to RxQuality issue
What is RxQuality Issue
Bad RxQuality is one of the biggest problems in a Network. The RxQuality that a network operator can offer to customers mostly depends on the RxLevel and the interference of the network.
There are two types of RxQuality problems, uplink RxQuality and downlink RxQuality. We can only detect downlink RxQuality problem by DT, however, if the downlink RxQuality is bad in one cell, there is a risk that there would be problems on the uplink as well.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 3
What is RxQuality Issue
Good RxQualit y
Bad RxQualit y
RxQuality is divided into eight levels which are from 0 to 7, the level 0 is the best and the level 7 is the worst.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 4
The problems raised by RxQuality issue
Bad RxQuality may raise many problems, such as:
Difficulty in accessing the network
Dropped calls due to bad quality
Poor handover success rate
Low MOS value
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 5
Bad Quality due to Signal Strength – FER is Bad As the signal strength drops down, the quality of the call becomes worse being effected by interference and/ or fading. Consequently the system becomes weaker to handle the interference. Drop calls and ping pong handovers usually happen in such environments. RxLev (Serving Cell and Neighbors) is not high enough (about less than -95dbm). Maybe there are interferences in this region for bad FER.
Bad RxLev Bad RxQual Bad FER
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 6
Bad Quality due to Signal Strength – FER is OK This case is similar with the previous except for FER. Signal strength is also bad in this, but FER is still fine. FER is ok, it means that there is no obvious interference in the area. The coverage is usually the problem in this situation.
Bad RxLev Bad RxQual Fine FER
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 7
Bad Quality due to C/A Interference There is adjacent channel interference in this case and the RxQuality is not good. Bad Quality due to Adjacent Interference. Adjacent BCCH between best server and best neighbor.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 8
Bad Quality due to Time Dispersion
Site Reflecting object
MS Time dispersion is caused by the reflections. The MS uses all or most of the received power, instead of only the direct signal, there is a larger probability to decode the information. So the RxQuality will be very bad perhaps.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 9
Bad Quality due to Time Dispersion The MS is near the cell, it is less than 1 mile far away. The RxQuality is very bad for the bad C/R, in which, R stands for reflected signal and C stands for original signal. The TA is too high. It is because that TA stands for the reflected signal but the original signal.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 10
The solution to RxQuality issue (1) RxQuality Issue
Solution Find out the interference source or /and
Bad Quality due to Signal Strength – FER is Bad
adjust the azimuth or downtilt of the antenna or /and adjust the power of the transmitter(s). There is no obvious interference in this
Bad Quality due to Signal Strength – FER is OK
situation. Adjust the azimuth or downtilt of the antenna or /and adjust the power of the transmitter(s).
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 11
The solution to RxQuality issue (2) RxQuality Issue
Solution
Bad Quality due to C/A Interference
Avoided adjacent frequencies in the same cell and preferably in neighboring cells as well.
Move the site to be placed near the reflecting Bad Quality due to Time Dispersion object to prevent time dispersion. Another efficient solution is to modify the antenna arrangement, either in azimuth (horizontally) or by tilt (vertically).
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 12
Thank you www.huawei.com
Related Documents 2w1qw
05 Dt Analysis - How To Analyze Quality Issue By Dt 1g2b4b
December 2019 14
How To Analyze Crossed Feeder Issue By Dt 91160
May 2020 14
International Dt 466 - Dt 530 6b3o5s
November 2019 56
Dt 180 2r6to
November 2019 78
Chamada Dt 4e6447
September 2022 0